Three-dimensional(3D)graphene monoliths are a new carbon material,that has tremendous potential in the fields of energy conversion and storage.They can solve the limitations of two-dimensional(2D)graphene sheets,inclu...Three-dimensional(3D)graphene monoliths are a new carbon material,that has tremendous potential in the fields of energy conversion and storage.They can solve the limitations of two-dimensional(2D)graphene sheets,including interlayer restacking,high contact resistance,and insufficient pore accessibility.By constructing interconnected porous networks,3D graphenes not only retain the intrinsic advantages of 2D graphene sheets,such as high specific surface area,excellent electrical and thermal conductivities,good mechanical properties,and outstanding chemical stability,but also enable efficient mass transport of external fluid species.We summarize the fabrication methods for 3D graphenes,with a particular focus on their applications in energy-related systems.Techniques including chemical reduction assembly,chemical vapor deposition,3D printing,chemical blowing,and zinc-tiered pyrolysis have been developed to change their pore structure and elemental composition,and ways in which they can be integrated with functional components.In terms of energy conversion and storage,they have found broad use in buffering mechanical impacts,suppressing noise,photothermal conversion,electromagnetic shielding and absorption.They have also been used in electrochemical energy systems such as supercapacitors,secondary batteries,and electrocatalysis.By reviewing recent progress in structural design and new applications,we also discuss the problems these materials face,including scalable fabrication and precise pore structure control,and possible new applications.展开更多
The authors regret that due to negligence,the picture was misplaced in the original manuscript,resulting in Fig.6d being incorrectly included.The correct version of Fig.6d is provided below for reference.This error do...The authors regret that due to negligence,the picture was misplaced in the original manuscript,resulting in Fig.6d being incorrectly included.The correct version of Fig.6d is provided below for reference.This error does not affect the conclusions of the study,and we apologize for any confusion it may have caused.展开更多
Works on exploring an environmentally clean method for producing an Mg,Al-hydrotalcite(Mg6Al2(OH) 16CO3·4H2O) layer and/or calcium carbonate(CaCO3) layer on Mg alloy in a carbonic acid solution system(aqueous HCO...Works on exploring an environmentally clean method for producing an Mg,Al-hydrotalcite(Mg6Al2(OH) 16CO3·4H2O) layer and/or calcium carbonate(CaCO3) layer on Mg alloy in a carbonic acid solution system(aqueous HCO3-/CO3 2-or Ca 2+ /HCO3-) at 50℃ were reviewed.Conversion treatment for the Mg,Al-hydrotalcite conversion coating was as follows.Mg alloy was treated first in acidic HCO3-/CO3 2-aqueous for precursor layer formation on Mg alloy surface and then in alkaline HCO3-/CO3 2-aqueous to form a crystallized Mg,Al-hydrotalcite coating.Duration of an Mg,Al-hydrotalcite coating on Mg alloy surface was reduced from 12 h to 4 h by the conversion treatment.On the other hand,for reducing the formation time of CaCO3 coating on Mg alloy,the aqueous Ca 2+ /HCO3-with a saturated Ca 2+ content was employed for developing a CaCO3 coating on Mg alloy.A dense CaCO3 coating could yield on Mg alloy surface in 2 h.Corrosion rate(corrosion current density,Jcorr) of the Mg,Al-hydrotalcite-coated sample and CaCO3-coated AZ91D sample was 7-10μA/cm 2,roughly two orders less than the Jcorr of the as-diecast sample(about 200μA/cm 2) . No corrosion spot on the Mg,Al-hydrotalcite-coated sample and CaCO3-coated sample was observed after 72 h and 192 h salt spray test,respectively.展开更多
Objective:Glioblastoma(GBM)is the most prevalent and aggressive adult primary cancer in the central nervous system.Therapeutic approaches for GBM treatment are under intense investigation,including the use of emerging...Objective:Glioblastoma(GBM)is the most prevalent and aggressive adult primary cancer in the central nervous system.Therapeutic approaches for GBM treatment are under intense investigation,including the use of emerging immunotherapies.Here,we propose an alternative approach to treat GBM through reprogramming proliferative GBM cells into non-proliferative neurons.Methods:Retroviruses were used to target highly proliferative human GBM cells through overexpression of neural transcription factors.Immunostaining,electrophysiological recording,and bulk RNA-seq were performed to investigate the mechanisms underlying the neuronal conversion of human GBM cells.An in vivo intracranial xenograft mouse model was used to examine the neuronal conversion of human GBM cells.Results:We report efficient neuronal conversion from human GBM cells by overexpressing single neural transcription factor Neurogenic differentiation 1(Neuro D1),Neurogenin-2(Neurog2),or Achaete-scute homolog 1(Ascl1).Subtype characterization showed that the majority of Neurog2-and Neuro D1-converted neurons were glutamatergic,while Ascl1 favored GABAergic neuron generation.The GBM cell-converted neurons not only showed pan-neuronal markers but also exhibited neuron-specific electrophysiological activities.Transcriptome analyses revealed that neuronal genes were activated in glioma cells after overexpression of neural transcription factors,and different signaling pathways were activated by different neural transcription factors.Importantly,the neuronal conversion of GBM cells was accompanied by significant inhibition of GBM cell proliferation in both in vitro and in vivo models.Conclusions:These results suggest that GBM cells can be reprogrammed into different subtypes of neurons,leading to a potential alternative approach to treat brain tumors using in vivo cell conversion technology.展开更多
The idea of Ku-band transceiver frequency conversion module design based on 3D micropackaging technology is proposed. By using the double frequency conversion technology,the dual transceiver circuit from Ku-band to L-...The idea of Ku-band transceiver frequency conversion module design based on 3D micropackaging technology is proposed. By using the double frequency conversion technology,the dual transceiver circuit from Ku-band to L-band is realized by combining with the local oscillator and the power control circuit to complete functions such as amplification, filtering and gain. In order to achieve the performance optimization and a high level of integration of the Ku-band monolithic microwave integrated circuits(MMIC) operating chip, the 3 D vertical interconnection micro-assembly technology is used. By stacking solder balls on the printed circuit board(PCB), the technology decreases the volume of the original transceiver to a miniaturized module. The module has a good electromagnetic compatibility through special structure designs. This module has the characteristics of miniaturization, low power consumption and high density, which is suitable for popularization in practical application.展开更多
The construction of S‐scheme heterojunction photocatalysts has been regarded as an effective avenue to facilitate the conversion of solar energy to fuel.However,there are still considerable challenges with regard to ...The construction of S‐scheme heterojunction photocatalysts has been regarded as an effective avenue to facilitate the conversion of solar energy to fuel.However,there are still considerable challenges with regard to efficient charge transfer,the abundance of catalytic sites,and extended light absorption.Herein,an S‐scheme heterojunction of 2D/2D zinc porphyrin‐based metal‐organic frameworks/BiVO_(4)nanosheets(Zn‐MOF/BVON)was fabricated for efficient photocatalytic CO_(2)conversion.The optimal one shows a 22‐fold photoactivity enhancement when compared to the previously reported BiVO4 nanoflake(ca.15 nm),and even exhibits~2‐time improvement than the traditional g‐C3N4/BiVO4 heterojunction.The excellent photoactivities are ascribed to the strengthened S‐scheme charge transfer and separation,promoted CO_(2)activation by the well‐dispersed metal nodes Zn_(2)(COO)_(4)in the Zn‐MOF,and extended visible light response range based on the results of the electrochemical reduction,electron paramagnetic resonance,and in‐situ diffuse reflectance infrared Fourier transform spectroscopy.The dimension‐matched Zn‐MOF/BVON S‐scheme heterojunction endowed with highly efficient charge separation and abundant catalytic active sites contributed to the superior CO2 conversion.This study offers a facile strategy for constructing S‐scheme heterojunctions involving porphyrin‐based MOFs for solar fuel production.展开更多
The time-interleaved analog-to-digital conversion(TIADC)technique is an effective method for increasing the sampling rate in a waveform digitization system.In this study,a 20-Gsps TIADC system was designed.A wide-band...The time-interleaved analog-to-digital conversion(TIADC)technique is an effective method for increasing the sampling rate in a waveform digitization system.In this study,a 20-Gsps TIADC system was designed.A wide-bandwidth performance was achieved by optimizing the analog circuits,and a sufficient effective number of bits(ENOB)performance guaranteed using the perfect reconstruction algorithm for mismatch error correction.The proposed system was verified by tests,and the results indicated that a-3 dB bandwidth of 6 GHz and the ENOB performance of 8.7 bits at 1 GHz and 7.6 bits at6 GHz were successfully achieved.展开更多
A new method creating depth information for 2D/3D conversion was proposed. The distance between objects is determined by the distances between objects and light source position which is estimated by the analysis of th...A new method creating depth information for 2D/3D conversion was proposed. The distance between objects is determined by the distances between objects and light source position which is estimated by the analysis of the image. The estimated lighting value is used to normalize the image. A threshold value is determined by some weighted operation between the original image and the normalized image. By applying the threshold value to the original image, background area is removed. Depth information of interested area is calculated from the lighting changes. The final 3D images converted with the proposed method are used to verify its effectiveness.展开更多
Nonlayered two-dimensional(2D)materials have attracted increasing attention,due to novel physical properties,unique surface structure,and high compatibility with microfabrication technique.However,owing to the inheren...Nonlayered two-dimensional(2D)materials have attracted increasing attention,due to novel physical properties,unique surface structure,and high compatibility with microfabrication technique.However,owing to the inherent strong covalent bonds,the direct synthesis of 2D planar structure from nonlayered materials,especially for the realization of large-size ultrathin 2D nonlayered materials,is still a huge challenge.Here,a general atomic substitution conversion strategy is proposed to synthesize large-size,ultrathin nonlayered 2D materials.Taking nonlayered CdS as a typical example,large-size ultrathin nonlayered CdS single-crystalline flakes are successfully achieved via a facile low-temperature chemical sulfurization method,where pre-grown layered CdI2 flakes are employed as the precursor via a simple hot plate assisted vertical vapor deposition method.The size and thickness of CdS flakes can be controlled by the CdI2 precursor.The growth mechanism is ascribed to the chemical substitution reaction from I to S atoms between CdI2 and CdS,which has been evidenced by experiments and theoretical calculations.The atomic substitution conversion strategy demonstrates that the existing 2D layered materials can serve as the precursor for difficult-to-synthesize nonlayered 2D materials,providing a bridge between layered and nonlayered materials,meanwhile realizing the fabrication of large-size ultrathin nonlayered 2D materials.展开更多
In order to adapt to the construction needs of the smart grid, smart substation need to solve the problem of protocol conversion between the conventional non-standardized condition monitoring equipment and the standar...In order to adapt to the construction needs of the smart grid, smart substation need to solve the problem of protocol conversion between the conventional non-standardized condition monitoring equipment and the standardized monitoring system. This paper proposed a realization method of conversion method between Modbus and IEC61850. Object-oriented technology is used for information model on Modbus. After the analysis of IEC61850 and MMS information and service model, to establish the model mapping relationship between IEC61850, MMS and Modbus based on the principle of minimum information point which is one to one correspondence. Combined with the implementation of SISCO MMS-EASE LITE software development kit programming, giving a realization method using QT programming techniques based on the mapping model. Finally, the establishment the interval controller as an example of protocol scheme verifies the correctness and the feasibility of protocol conversion method.展开更多
2D-to-3D video conversion is a feasible way to generate 3D programs for the current 3DTV industry. However, for large-scale 3D video production, current systems are no longer adequate in terms of the time and labor re...2D-to-3D video conversion is a feasible way to generate 3D programs for the current 3DTV industry. However, for large-scale 3D video production, current systems are no longer adequate in terms of the time and labor required for conversion. In this paper, we introduce a distributed 2D-to-3D video conversion system that includes a 2D-to-3D video conversion module, architecture of the parallel computation on the cloud, and 3D video coding in the system. The system enables cooperation among multiple users in the simultaneous completion of their conversion tasks so that the conversion efficiency is greatly promoted. In the experiments, we evaluate the system based on criteria related to both time consumption and video coding performance.展开更多
In this paper,we propose an improved torque sensorless speed control method for electric assisted bicycle,this method considers the coordinate conversion.A low-pass filter is designed in disturbance observer to estima...In this paper,we propose an improved torque sensorless speed control method for electric assisted bicycle,this method considers the coordinate conversion.A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling.A DC motor provides assisted power driving,the assistance method is based on the realtime wheel angular velocity and coordinate system transformation.The effect of observer is proved,and the proposed method guarantees stability under disturbances.It is also compared to the existing methods and their performances are illustrated through simulations.The proposed method improves the performance both in rapidity and stability.展开更多
An organic-magnesium complex conversion(OMCC)coating on AZ91D magnesium alloy was obtained by treating in a solution containing organic compounds.SEM,FESEM and XPS were used to examine the surface morphology,thickness...An organic-magnesium complex conversion(OMCC)coating on AZ91D magnesium alloy was obtained by treating in a solution containing organic compounds.SEM,FESEM and XPS were used to examine the surface morphology,thickness and structure of the conversion coatings.The results show that the continuous and uniform conversion coating is deposited on AZ91D alloy and the main component of the coatings is organic compound containing benzene ring,which forms a chemical bond with magnesium.The polarization measurement and salt spray test show that the corrosion resistance of the conversion coating is much higher than that of traditional chromate conversion coating.展开更多
A method for precise conversion between virtual world and real world is put forward in this paper. The method aims to precisely establish the connection between the virtual coordinates and the real coordinates with Op...A method for precise conversion between virtual world and real world is put forward in this paper. The method aims to precisely establish the connection between the virtual coordinates and the real coordinates with OpenGL. In the virtual world, two virtual cameras are set to capture the left and right perspective planar images, and coordinates of the planar images can be calculated by the perspective projection model. With coordinates of planar images, coordinates of the stereo- scopic image synthesized in the real world can be calculated by the binocular observation model. Therefore, the corresponding connection between the two systems is established. Experimental re- suits match data from this method well. Therefore, this method can precisely realize the conversion and the interactivity, laying a solid foundation for further study.展开更多
The speed and cost of A/D conversion are conflict to each other. As micro-controller speed is increasing and its internal function is improving, full utilization of its internal resource can dramatically increase A/D ...The speed and cost of A/D conversion are conflict to each other. As micro-controller speed is increasing and its internal function is improving, full utilization of its internal resource can dramatically increase A/D conversion speed and without compromising conversion quality. MSP430F11x1 series micro-controller is exploited to increase A/D conversion speed.展开更多
Proposed is an interference type of optical analog-to-digital conversion(ADC). The refractive index of Fabry-Perot cavity changes with different voltages. The Fabry-Perot resonator converts electronic intensity into l...Proposed is an interference type of optical analog-to-digital conversion(ADC). The refractive index of Fabry-Perot cavity changes with different voltages. The Fabry-Perot resonator converts electronic intensity into light wavelength through selecting lights of different wavelengthes. The parameters of the scheme are acquired with the transmission matrix of optical element and the time of steady-state light field. The maximum sampling speedes of 4-bit, 6-bit, 7-bit, 8-bit and 9-bit(ADC) are 1.695×1010 count/s, 4.33×109 count/s, 2.38×109 count/s, 1.24×109 count/s and 5.9×108 count/s, respectively.展开更多
MXene-based 2D heterostructures have emerged as a highly promising area of research in the field of energy storage and conversion,owing to their exceptional properties and versatility.This comprehensive review aims to...MXene-based 2D heterostructures have emerged as a highly promising area of research in the field of energy storage and conversion,owing to their exceptional properties and versatility.This comprehensive review aims to highlight the recent advancements and challenges associated with tailoring MXene-based heterostructures.The review focuses on the progress made in the past decade regarding 2D/2D MXene-based heterostructures for energy storage/conversion.The influence of interfacial interactions,electronic conductivity,ion diffusion pathways,and surface chemistry on the performance of these heterostructures in supercapacitors,batteries,and water-splitting reactions have been critically examined.By considering these factors,researchers gain insights into the design principles and optimization strategies for MXene-based heterostructures.By understanding the progress made and the existing challenges,researchers can further explore the vast potential of MXene heterostructures and contribute to the development of next-generation energy storage and conversion technologies.展开更多
Aerogels are ultra-lightweight,porous materials defined by a complex network of interconnected pores and nanostructures,which effectively suppress heat transfer,making them exceptional for thermal insulation.Furthermo...Aerogels are ultra-lightweight,porous materials defined by a complex network of interconnected pores and nanostructures,which effectively suppress heat transfer,making them exceptional for thermal insulation.Furthermore,their porous architecture can trap and scatter light via multiple internal reflections,extending the optical path within the material.When combined with suitable light-absorbing materials,this feature significantly enhances light absorption(darkness).To validate this concept,mesoporous silica aerogel particles were incorporated into a resorcinol-formaldehyde(RF)sol,and the silica-to-RF ratio was optimized to achieve uniform carbon compound coatings on the silica pore walls.Notably,increasing silica loading raised the sol viscosity,enabling formulations ideal for direct ink writing processes with excellent shape fidelity for super-black topographical designs.The printed silica-RF green bodies exhibited remarkable mechanical strength and ultra-low thermal conductivity(15.8 m W m^(-1) K^(-1))prior to pyrolysis.Following pyrolysis,the composites maintained structural integrity and printed microcellular geometries while achieving super-black coloration(abs.99.56%in the 280-2500 nm range)and high photothermal conversion efficiency(94.2%).Additionally,these silica-carbon aerogel microcellulars demonstrated stable electrical conductivity and low electrochemical impedance.The synergistic combination of 3D printability and super-black photothermal features makes these composites highly versatile for multifunctional applications,including on-demand thermal management,and efficient solar-driven water production.展开更多
Since the discovery of two-dimensional(2D)materials,they have garnered significant attention from researchers owing to the exceptional and modifiable physical and chemical properties.The weak interlayer interactions i...Since the discovery of two-dimensional(2D)materials,they have garnered significant attention from researchers owing to the exceptional and modifiable physical and chemical properties.The weak interlayer interactions in 2D materials enable precise control over Van der Waals gaps,thereby enhancing their performance and introducing novel characteristics.By regulating the Van der Waals gap,2D materials exhibit a diverse range of applications in the field of energy storage and conversion.This article provides a comprehensive review of various methods for manipulating Van der Waals gaps in 2D materials,including interlayer intercalation,vip atom doping within the lattice,formation of Van der Waals heterojunctions,and adjustment of stacking modes.Moreover,the impacts of these manipulations on energy storage and conversion applications are also summarized.Finally,potential future research directions are proposed to shed light on advancements in Van der Waals gap engineering.展开更多
This article proposes a general framework for the conversion of U-238 and Th-232 utilizing fusion-produced neutrons. This recognizes that emerging fusion technologies may not produce sufficient net energy output to ju...This article proposes a general framework for the conversion of U-238 and Th-232 utilizing fusion-produced neutrons. This recognizes that emerging fusion technologies may not produce sufficient net energy output to justify stand-alone applications, yet may be commercially viable for breeder transmutation or hybrid fusion-fission reactor concepts proposed herein to dispose of nuclear wastes and long life high radioactive fission products remaining in shutdown nuclear power plants. Results show that this could be achievable within a decade, given an appropriate fusion source. However, if 20% beryllium of nuclei density is added to the convertor blanket, the efficiency of the conversion process can be significantly increased. Also, the neutron energy spectrum resulting from dense D-D plasma core fusion is much softer than D-T fusion neutron source, hence the probability of (n, p) (n, α) backward decay reaction paths will be smaller and the conversion efficiency will be elevated.展开更多
基金supported by National Natural Science Foundation of China(52272039,U23B2075,51972168)Key Research and Development Program in Jiangsu Province(BE2023085)Natural Science Foundation of Jiangsu Province of China(BK20231406)。
文摘Three-dimensional(3D)graphene monoliths are a new carbon material,that has tremendous potential in the fields of energy conversion and storage.They can solve the limitations of two-dimensional(2D)graphene sheets,including interlayer restacking,high contact resistance,and insufficient pore accessibility.By constructing interconnected porous networks,3D graphenes not only retain the intrinsic advantages of 2D graphene sheets,such as high specific surface area,excellent electrical and thermal conductivities,good mechanical properties,and outstanding chemical stability,but also enable efficient mass transport of external fluid species.We summarize the fabrication methods for 3D graphenes,with a particular focus on their applications in energy-related systems.Techniques including chemical reduction assembly,chemical vapor deposition,3D printing,chemical blowing,and zinc-tiered pyrolysis have been developed to change their pore structure and elemental composition,and ways in which they can be integrated with functional components.In terms of energy conversion and storage,they have found broad use in buffering mechanical impacts,suppressing noise,photothermal conversion,electromagnetic shielding and absorption.They have also been used in electrochemical energy systems such as supercapacitors,secondary batteries,and electrocatalysis.By reviewing recent progress in structural design and new applications,we also discuss the problems these materials face,including scalable fabrication and precise pore structure control,and possible new applications.
文摘The authors regret that due to negligence,the picture was misplaced in the original manuscript,resulting in Fig.6d being incorrectly included.The correct version of Fig.6d is provided below for reference.This error does not affect the conclusions of the study,and we apologize for any confusion it may have caused.
基金Project supported by the Ministry of Education Under the ATU Plan
文摘Works on exploring an environmentally clean method for producing an Mg,Al-hydrotalcite(Mg6Al2(OH) 16CO3·4H2O) layer and/or calcium carbonate(CaCO3) layer on Mg alloy in a carbonic acid solution system(aqueous HCO3-/CO3 2-or Ca 2+ /HCO3-) at 50℃ were reviewed.Conversion treatment for the Mg,Al-hydrotalcite conversion coating was as follows.Mg alloy was treated first in acidic HCO3-/CO3 2-aqueous for precursor layer formation on Mg alloy surface and then in alkaline HCO3-/CO3 2-aqueous to form a crystallized Mg,Al-hydrotalcite coating.Duration of an Mg,Al-hydrotalcite coating on Mg alloy surface was reduced from 12 h to 4 h by the conversion treatment.On the other hand,for reducing the formation time of CaCO3 coating on Mg alloy,the aqueous Ca 2+ /HCO3-with a saturated Ca 2+ content was employed for developing a CaCO3 coating on Mg alloy.A dense CaCO3 coating could yield on Mg alloy surface in 2 h.Corrosion rate(corrosion current density,Jcorr) of the Mg,Al-hydrotalcite-coated sample and CaCO3-coated AZ91D sample was 7-10μA/cm 2,roughly two orders less than the Jcorr of the as-diecast sample(about 200μA/cm 2) . No corrosion spot on the Mg,Al-hydrotalcite-coated sample and CaCO3-coated sample was observed after 72 h and 192 h salt spray test,respectively.
基金supported by the Charles H.“Skip”Smith Endowment Fund and the Verne M.Willaman Endowment Fund from the Pennsylvania State University to G.C。
文摘Objective:Glioblastoma(GBM)is the most prevalent and aggressive adult primary cancer in the central nervous system.Therapeutic approaches for GBM treatment are under intense investigation,including the use of emerging immunotherapies.Here,we propose an alternative approach to treat GBM through reprogramming proliferative GBM cells into non-proliferative neurons.Methods:Retroviruses were used to target highly proliferative human GBM cells through overexpression of neural transcription factors.Immunostaining,electrophysiological recording,and bulk RNA-seq were performed to investigate the mechanisms underlying the neuronal conversion of human GBM cells.An in vivo intracranial xenograft mouse model was used to examine the neuronal conversion of human GBM cells.Results:We report efficient neuronal conversion from human GBM cells by overexpressing single neural transcription factor Neurogenic differentiation 1(Neuro D1),Neurogenin-2(Neurog2),or Achaete-scute homolog 1(Ascl1).Subtype characterization showed that the majority of Neurog2-and Neuro D1-converted neurons were glutamatergic,while Ascl1 favored GABAergic neuron generation.The GBM cell-converted neurons not only showed pan-neuronal markers but also exhibited neuron-specific electrophysiological activities.Transcriptome analyses revealed that neuronal genes were activated in glioma cells after overexpression of neural transcription factors,and different signaling pathways were activated by different neural transcription factors.Importantly,the neuronal conversion of GBM cells was accompanied by significant inhibition of GBM cell proliferation in both in vitro and in vivo models.Conclusions:These results suggest that GBM cells can be reprogrammed into different subtypes of neurons,leading to a potential alternative approach to treat brain tumors using in vivo cell conversion technology.
文摘The idea of Ku-band transceiver frequency conversion module design based on 3D micropackaging technology is proposed. By using the double frequency conversion technology,the dual transceiver circuit from Ku-band to L-band is realized by combining with the local oscillator and the power control circuit to complete functions such as amplification, filtering and gain. In order to achieve the performance optimization and a high level of integration of the Ku-band monolithic microwave integrated circuits(MMIC) operating chip, the 3 D vertical interconnection micro-assembly technology is used. By stacking solder balls on the printed circuit board(PCB), the technology decreases the volume of the original transceiver to a miniaturized module. The module has a good electromagnetic compatibility through special structure designs. This module has the characteristics of miniaturization, low power consumption and high density, which is suitable for popularization in practical application.
文摘The construction of S‐scheme heterojunction photocatalysts has been regarded as an effective avenue to facilitate the conversion of solar energy to fuel.However,there are still considerable challenges with regard to efficient charge transfer,the abundance of catalytic sites,and extended light absorption.Herein,an S‐scheme heterojunction of 2D/2D zinc porphyrin‐based metal‐organic frameworks/BiVO_(4)nanosheets(Zn‐MOF/BVON)was fabricated for efficient photocatalytic CO_(2)conversion.The optimal one shows a 22‐fold photoactivity enhancement when compared to the previously reported BiVO4 nanoflake(ca.15 nm),and even exhibits~2‐time improvement than the traditional g‐C3N4/BiVO4 heterojunction.The excellent photoactivities are ascribed to the strengthened S‐scheme charge transfer and separation,promoted CO_(2)activation by the well‐dispersed metal nodes Zn_(2)(COO)_(4)in the Zn‐MOF,and extended visible light response range based on the results of the electrochemical reduction,electron paramagnetic resonance,and in‐situ diffuse reflectance infrared Fourier transform spectroscopy.The dimension‐matched Zn‐MOF/BVON S‐scheme heterojunction endowed with highly efficient charge separation and abundant catalytic active sites contributed to the superior CO2 conversion.This study offers a facile strategy for constructing S‐scheme heterojunctions involving porphyrin‐based MOFs for solar fuel production.
基金supported in part by the National Natural Science Foundation of China(No.11675173)the Youth Innovation Promotion Association CASthe CAS Center for Excellence in Particle Physics(CCEPP)。
文摘The time-interleaved analog-to-digital conversion(TIADC)technique is an effective method for increasing the sampling rate in a waveform digitization system.In this study,a 20-Gsps TIADC system was designed.A wide-bandwidth performance was achieved by optimizing the analog circuits,and a sufficient effective number of bits(ENOB)performance guaranteed using the perfect reconstruction algorithm for mismatch error correction.The proposed system was verified by tests,and the results indicated that a-3 dB bandwidth of 6 GHz and the ENOB performance of 8.7 bits at 1 GHz and 7.6 bits at6 GHz were successfully achieved.
文摘A new method creating depth information for 2D/3D conversion was proposed. The distance between objects is determined by the distances between objects and light source position which is estimated by the analysis of the image. The estimated lighting value is used to normalize the image. A threshold value is determined by some weighted operation between the original image and the normalized image. By applying the threshold value to the original image, background area is removed. Depth information of interested area is calculated from the lighting changes. The final 3D images converted with the proposed method are used to verify its effectiveness.
基金This work was supported by National Natural Science Foundation of China(21825103,11774044,52072059)the Hubei Provincial Natural Science Foundation of China(2019CFA002)+1 种基金the Fundamental Research Funds for the Central Universities(2019kfyXMBZ018 and 2020kfyXJJS050)We also thank the technical support from Analytical and Testing Center in Huazhong University of Science and Technology.
文摘Nonlayered two-dimensional(2D)materials have attracted increasing attention,due to novel physical properties,unique surface structure,and high compatibility with microfabrication technique.However,owing to the inherent strong covalent bonds,the direct synthesis of 2D planar structure from nonlayered materials,especially for the realization of large-size ultrathin 2D nonlayered materials,is still a huge challenge.Here,a general atomic substitution conversion strategy is proposed to synthesize large-size,ultrathin nonlayered 2D materials.Taking nonlayered CdS as a typical example,large-size ultrathin nonlayered CdS single-crystalline flakes are successfully achieved via a facile low-temperature chemical sulfurization method,where pre-grown layered CdI2 flakes are employed as the precursor via a simple hot plate assisted vertical vapor deposition method.The size and thickness of CdS flakes can be controlled by the CdI2 precursor.The growth mechanism is ascribed to the chemical substitution reaction from I to S atoms between CdI2 and CdS,which has been evidenced by experiments and theoretical calculations.The atomic substitution conversion strategy demonstrates that the existing 2D layered materials can serve as the precursor for difficult-to-synthesize nonlayered 2D materials,providing a bridge between layered and nonlayered materials,meanwhile realizing the fabrication of large-size ultrathin nonlayered 2D materials.
文摘In order to adapt to the construction needs of the smart grid, smart substation need to solve the problem of protocol conversion between the conventional non-standardized condition monitoring equipment and the standardized monitoring system. This paper proposed a realization method of conversion method between Modbus and IEC61850. Object-oriented technology is used for information model on Modbus. After the analysis of IEC61850 and MMS information and service model, to establish the model mapping relationship between IEC61850, MMS and Modbus based on the principle of minimum information point which is one to one correspondence. Combined with the implementation of SISCO MMS-EASE LITE software development kit programming, giving a realization method using QT programming techniques based on the mapping model. Finally, the establishment the interval controller as an example of protocol scheme verifies the correctness and the feasibility of protocol conversion method.
基金supported by the National Key Basic Research Program of China (973 Program) under Grant No. 2009CB320904the National Natural Science Foundation of China under Grants No. 61121002, No. 61231010, 91120004the Key Projects in the National Science and Technology Pillar Program under Grant No. 2011BAH08B03
文摘2D-to-3D video conversion is a feasible way to generate 3D programs for the current 3DTV industry. However, for large-scale 3D video production, current systems are no longer adequate in terms of the time and labor required for conversion. In this paper, we introduce a distributed 2D-to-3D video conversion system that includes a 2D-to-3D video conversion module, architecture of the parallel computation on the cloud, and 3D video coding in the system. The system enables cooperation among multiple users in the simultaneous completion of their conversion tasks so that the conversion efficiency is greatly promoted. In the experiments, we evaluate the system based on criteria related to both time consumption and video coding performance.
基金supported by the National Natural Science Foundation of China(51775325)Hong Kong Scholars Program of China(XJ2013015)。
文摘In this paper,we propose an improved torque sensorless speed control method for electric assisted bicycle,this method considers the coordinate conversion.A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling.A DC motor provides assisted power driving,the assistance method is based on the realtime wheel angular velocity and coordinate system transformation.The effect of observer is proved,and the proposed method guarantees stability under disturbances.It is also compared to the existing methods and their performances are illustrated through simulations.The proposed method improves the performance both in rapidity and stability.
基金Project(50871046)supported by the National Natural Science Foundation of ChinaProject(2007KZ09)supported by the 2007 Scienceand Technology Support Plan of Changchun City,China
文摘An organic-magnesium complex conversion(OMCC)coating on AZ91D magnesium alloy was obtained by treating in a solution containing organic compounds.SEM,FESEM and XPS were used to examine the surface morphology,thickness and structure of the conversion coatings.The results show that the continuous and uniform conversion coating is deposited on AZ91D alloy and the main component of the coatings is organic compound containing benzene ring,which forms a chemical bond with magnesium.The polarization measurement and salt spray test show that the corrosion resistance of the conversion coating is much higher than that of traditional chromate conversion coating.
基金Supported by the National Natural Science Foundation of China ( 60674052)
文摘A method for precise conversion between virtual world and real world is put forward in this paper. The method aims to precisely establish the connection between the virtual coordinates and the real coordinates with OpenGL. In the virtual world, two virtual cameras are set to capture the left and right perspective planar images, and coordinates of the planar images can be calculated by the perspective projection model. With coordinates of planar images, coordinates of the stereo- scopic image synthesized in the real world can be calculated by the binocular observation model. Therefore, the corresponding connection between the two systems is established. Experimental re- suits match data from this method well. Therefore, this method can precisely realize the conversion and the interactivity, laying a solid foundation for further study.
文摘The speed and cost of A/D conversion are conflict to each other. As micro-controller speed is increasing and its internal function is improving, full utilization of its internal resource can dramatically increase A/D conversion speed and without compromising conversion quality. MSP430F11x1 series micro-controller is exploited to increase A/D conversion speed.
基金Natural Science Foundation from Colleges and Universities of Jiangsu Provine(06KJD510034)
文摘Proposed is an interference type of optical analog-to-digital conversion(ADC). The refractive index of Fabry-Perot cavity changes with different voltages. The Fabry-Perot resonator converts electronic intensity into light wavelength through selecting lights of different wavelengthes. The parameters of the scheme are acquired with the transmission matrix of optical element and the time of steady-state light field. The maximum sampling speedes of 4-bit, 6-bit, 7-bit, 8-bit and 9-bit(ADC) are 1.695×1010 count/s, 4.33×109 count/s, 2.38×109 count/s, 1.24×109 count/s and 5.9×108 count/s, respectively.
基金supported by the Hong Kong Re-search Grants Council(Project No.CityU 11218420).
文摘MXene-based 2D heterostructures have emerged as a highly promising area of research in the field of energy storage and conversion,owing to their exceptional properties and versatility.This comprehensive review aims to highlight the recent advancements and challenges associated with tailoring MXene-based heterostructures.The review focuses on the progress made in the past decade regarding 2D/2D MXene-based heterostructures for energy storage/conversion.The influence of interfacial interactions,electronic conductivity,ion diffusion pathways,and surface chemistry on the performance of these heterostructures in supercapacitors,batteries,and water-splitting reactions have been critically examined.By considering these factors,researchers gain insights into the design principles and optimization strategies for MXene-based heterostructures.By understanding the progress made and the existing challenges,researchers can further explore the vast potential of MXene heterostructures and contribute to the development of next-generation energy storage and conversion technologies.
基金financially supported by the Swiss National Science Foundation(grant number IZLRZ2_164058)the China Scholarship Council Ph.D.student exchange programthe Priority Academic Program Development of Jiangsu Higher Education Institution(PAPD)。
文摘Aerogels are ultra-lightweight,porous materials defined by a complex network of interconnected pores and nanostructures,which effectively suppress heat transfer,making them exceptional for thermal insulation.Furthermore,their porous architecture can trap and scatter light via multiple internal reflections,extending the optical path within the material.When combined with suitable light-absorbing materials,this feature significantly enhances light absorption(darkness).To validate this concept,mesoporous silica aerogel particles were incorporated into a resorcinol-formaldehyde(RF)sol,and the silica-to-RF ratio was optimized to achieve uniform carbon compound coatings on the silica pore walls.Notably,increasing silica loading raised the sol viscosity,enabling formulations ideal for direct ink writing processes with excellent shape fidelity for super-black topographical designs.The printed silica-RF green bodies exhibited remarkable mechanical strength and ultra-low thermal conductivity(15.8 m W m^(-1) K^(-1))prior to pyrolysis.Following pyrolysis,the composites maintained structural integrity and printed microcellular geometries while achieving super-black coloration(abs.99.56%in the 280-2500 nm range)and high photothermal conversion efficiency(94.2%).Additionally,these silica-carbon aerogel microcellulars demonstrated stable electrical conductivity and low electrochemical impedance.The synergistic combination of 3D printability and super-black photothermal features makes these composites highly versatile for multifunctional applications,including on-demand thermal management,and efficient solar-driven water production.
基金financially supported by the National Key Technologies R&D Program of China(No.2022YFB2404300)the National Natural Science Foundation of China(No.22171016)+1 种基金the Fundamental Research Funds for the Central Universities and the Overseas Expertise Introduction Project for Discipline Innovation(111 Project)(No.B17002)supported by the Academic Excellence Foundation of BUAA for Ph.D.Students。
文摘Since the discovery of two-dimensional(2D)materials,they have garnered significant attention from researchers owing to the exceptional and modifiable physical and chemical properties.The weak interlayer interactions in 2D materials enable precise control over Van der Waals gaps,thereby enhancing their performance and introducing novel characteristics.By regulating the Van der Waals gap,2D materials exhibit a diverse range of applications in the field of energy storage and conversion.This article provides a comprehensive review of various methods for manipulating Van der Waals gaps in 2D materials,including interlayer intercalation,vip atom doping within the lattice,formation of Van der Waals heterojunctions,and adjustment of stacking modes.Moreover,the impacts of these manipulations on energy storage and conversion applications are also summarized.Finally,potential future research directions are proposed to shed light on advancements in Van der Waals gap engineering.
文摘This article proposes a general framework for the conversion of U-238 and Th-232 utilizing fusion-produced neutrons. This recognizes that emerging fusion technologies may not produce sufficient net energy output to justify stand-alone applications, yet may be commercially viable for breeder transmutation or hybrid fusion-fission reactor concepts proposed herein to dispose of nuclear wastes and long life high radioactive fission products remaining in shutdown nuclear power plants. Results show that this could be achievable within a decade, given an appropriate fusion source. However, if 20% beryllium of nuclei density is added to the convertor blanket, the efficiency of the conversion process can be significantly increased. Also, the neutron energy spectrum resulting from dense D-D plasma core fusion is much softer than D-T fusion neutron source, hence the probability of (n, p) (n, α) backward decay reaction paths will be smaller and the conversion efficiency will be elevated.
