Based on the ABAQUS/Explicit finite element method,the forming force changing trend of deep drawing test for 6A16 aluminum alloy plate after pre-aging and storage at room temperature for one month was simulated under ...Based on the ABAQUS/Explicit finite element method,the forming force changing trend of deep drawing test for 6A16 aluminum alloy plate after pre-aging and storage at room temperature for one month was simulated under friction coefficient ranging from 0 to 0.22.The lubricants selected for the tests were mechanical oil,butter and dry film lubricant,and the friction coefficient of these lubricants were 0.05,0.10 and 0.15,respectively.Microstructural evolution of 6 A16 aluminum alloy plate during drawing forming was investigated by OM,SEM and EBSD.The results showed that,with the increase of friction coefficient,the stress,strain and deformation degree in deformation zone increased,while the grain size in deformation zone decreased.Thus,the hardness of the cup-typed component increased with the increase of friction coefficient.Butter-lubricated cups had the highest tensile strength and yield strength after paint-bake cycle.The combination of simulation results and microstructure analysis of 6A16 aluminum alloy plate after drawing forming indicates that the appropriate lubricant is butter.展开更多
Based on the ABAQUS/explicit finite element method,the deep drawing of 6A16 alloy pre-aged and then storaged at room temperature for 1 week with various blank-holder forces(10,14,18 kN) was studied.The distribution an...Based on the ABAQUS/explicit finite element method,the deep drawing of 6A16 alloy pre-aged and then storaged at room temperature for 1 week with various blank-holder forces(10,14,18 kN) was studied.The distribution and variation of stress and strain in deformation zones were investigated to drive the forming property and process of the alloy.Besides,the simulation result was verified combined with the deep drawing experiments.The results show that the stress and strain of the deformation zone have an incremental trend with the blank-holder force increasing while the deformation degree and grain size within a certain deformation zone have an obvious increase and an enlargement,respectively.After the deep drawing,the hardness of products also increases with the enhancement of blank-holder force.The blank-holder force of 18 kN is certified as the preferential one by the analysis of microstructure and simulation results.展开更多
Hand, foot and mouth disease(HFMD) is a significant health concern in the Asia–Pacific regions for infants and young children in recent years. However, no vaccines or therapeutics are available at present. The causat...Hand, foot and mouth disease(HFMD) is a significant health concern in the Asia–Pacific regions for infants and young children in recent years. However, no vaccines or therapeutics are available at present. The causative agents for HFMD include human enterovirus 71(EV71), coxsackievirus A16(CVA16) and some other viruses. Recently, tremendous progress has been made in the development of monovalent and bivalent vaccines against HFMD. A few neutralizing monoclonal antibodies against EV71 or CVA16 have been identified and characterized. Here, we reviewed some achievements for the development of broadly protective vaccines and neutralizing antibodies against HFMD, and discussed challenges and prospects toward broadly protective multivalent vaccines and therapeutic antibodies against HFMD.展开更多
基金Funded by the National Key Research and Development Program of China(No.2016YFB0300805).
文摘Based on the ABAQUS/Explicit finite element method,the forming force changing trend of deep drawing test for 6A16 aluminum alloy plate after pre-aging and storage at room temperature for one month was simulated under friction coefficient ranging from 0 to 0.22.The lubricants selected for the tests were mechanical oil,butter and dry film lubricant,and the friction coefficient of these lubricants were 0.05,0.10 and 0.15,respectively.Microstructural evolution of 6 A16 aluminum alloy plate during drawing forming was investigated by OM,SEM and EBSD.The results showed that,with the increase of friction coefficient,the stress,strain and deformation degree in deformation zone increased,while the grain size in deformation zone decreased.Thus,the hardness of the cup-typed component increased with the increase of friction coefficient.Butter-lubricated cups had the highest tensile strength and yield strength after paint-bake cycle.The combination of simulation results and microstructure analysis of 6A16 aluminum alloy plate after drawing forming indicates that the appropriate lubricant is butter.
基金financially supported by the National Key Research and Development Program of China (No. 2016YFB0300805)
文摘Based on the ABAQUS/explicit finite element method,the deep drawing of 6A16 alloy pre-aged and then storaged at room temperature for 1 week with various blank-holder forces(10,14,18 kN) was studied.The distribution and variation of stress and strain in deformation zones were investigated to drive the forming property and process of the alloy.Besides,the simulation result was verified combined with the deep drawing experiments.The results show that the stress and strain of the deformation zone have an incremental trend with the blank-holder force increasing while the deformation degree and grain size within a certain deformation zone have an obvious increase and an enlargement,respectively.After the deep drawing,the hardness of products also increases with the enhancement of blank-holder force.The blank-holder force of 18 kN is certified as the preferential one by the analysis of microstructure and simulation results.
基金supported by the National Basic Research Program of China(2010CB912403)the National Natural Science Foundation of China(31370730 and 31070144)
文摘Hand, foot and mouth disease(HFMD) is a significant health concern in the Asia–Pacific regions for infants and young children in recent years. However, no vaccines or therapeutics are available at present. The causative agents for HFMD include human enterovirus 71(EV71), coxsackievirus A16(CVA16) and some other viruses. Recently, tremendous progress has been made in the development of monovalent and bivalent vaccines against HFMD. A few neutralizing monoclonal antibodies against EV71 or CVA16 have been identified and characterized. Here, we reviewed some achievements for the development of broadly protective vaccines and neutralizing antibodies against HFMD, and discussed challenges and prospects toward broadly protective multivalent vaccines and therapeutic antibodies against HFMD.
