With the rapid development and commercialization of wireless communications,the execution of OTA testing requires a tremendous amount of test time.Therefore,test time reduction is of great significance.The objective o...With the rapid development and commercialization of wireless communications,the execution of OTA testing requires a tremendous amount of test time.Therefore,test time reduction is of great significance.The objective of this article is to determine optimal measurement grids for SISO OTA testing of 5G Sub-6 GHz user equipments(UEs)in anechoic chamber with satisfactory accuracy and efficiency.The effect of different grid configurations on OTA performance is analyzed quantitatively using reference radiation patterns at different bands.These patterns are utilized to mimic the worst-case radiation patterns of 5G Sub-6 GHz UEs.Subsequently,the associated measurement uncertainty(MU)terms are quantitatively analyzed and determined based on statistical analysis.According to the comparison of calculated MUs,reduction of grid points from currentlyrequired 62(30/30,Δθ/Δϕ)to 26(45/45)could achieve roughly 60%test time reduction for Sub-6 GHz,while still maintaining an uncertainty level of≤0.25 dB.These values can be further reduced to 14(60/60)with 80%reduction for Sub-3 GHz.More importantly,the recommended grid configurations in this research are applicable to both TIS and TRP testing.展开更多
This article presents a compact crab-shaped reconfigurable antenna(CSRA)designed for 5G sub-6 GHz wireless applications. The antenna achieves enhanced gain in a miniaturized form factor by incorporating a hexagonal sp...This article presents a compact crab-shaped reconfigurable antenna(CSRA)designed for 5G sub-6 GHz wireless applications. The antenna achieves enhanced gain in a miniaturized form factor by incorporating a hexagonal split-ring structure controlled via two radio frequency(RF) positive-intrinsicnegative(PIN) diodes(BAR64-02V). While the antenna is primarily designed to operate at 3.50 GHz for sub-6 GHz 5G applications, RF switching enables the CSRA to cover a broader frequency spectrum, including the S-band, X-band, and portions of the Ku-band. The proposed antenna offers several advantages: It is low-cost(fabricated on an FR-4 substrate), compact(achieving 64.07% size reduction compared to conventional designs), and features both frequency and gain reconfigurability through digitally controlled PIN diode switching. The reflection coefficients of the antenna, both without diodes and across all four switching states, were experimentally validated in the laboratory using a Keysight Field Fox microwave analyzer(N9916A, 14 GHz). The simulated radiation patterns and gain characteristics closely matched the measured values, demonstrating an excellent agreement. This study bridges the gap between traditional and next-generation antenna designs by offering a compact,cost-effective, and high-performance solution for multiband, reconfigurable wireless communication systems. The integration of double-split-ring resonators and dynamic reconfigurability makes the proposed antenna a strong candidate for various applications, including S-band and X-band systems, as well as the emerging lower 6G band(7.125 GHz–8.400 GHz).展开更多
In this paper,we propose a sub-6GHz channel assisted hybrid beamforming(HBF)for mmWave system under both line-of-sight(LOS)and non-line-of-sight(NLOS)scenarios without mmWave channel estimation.Meanwhile,we resort to ...In this paper,we propose a sub-6GHz channel assisted hybrid beamforming(HBF)for mmWave system under both line-of-sight(LOS)and non-line-of-sight(NLOS)scenarios without mmWave channel estimation.Meanwhile,we resort to the selfsupervised approach to eliminate the need for labels,thus avoiding the accompanied high cost of data collection and annotation.We first construct the dense connection network(DCnet)with three modules:the feature extraction module for extracting channel characteristic from a large amount of channel data,the feature fusion module for combining multidimensional features,and the prediction module for generating the HBF matrices.Next,we establish a lightweight network architecture,named as LDnet,to reduce the number of model parameters and computational complexity.The proposed sub-6GHz assisted approach eliminates mmWave pilot resources compared to the method using mmWave channel information directly.The simulation results indicate that the proposed DCnet and LDnet can achieve the spectral efficiency that is superior to the traditional orthogonal matching pursuit(OMP)algorithm by 13.66% and 10.44% under LOS scenarios and by 32.35% and 27.75% under NLOS scenarios,respectively.Moreover,the LDnet achieves 98.52% reduction in the number of model parameters and 22.93% reduction in computational complexity compared to DCnet.展开更多
为研究发光等离子体对高功率微波的防护性能,建立了一维条件下等离子体与高功率微波相互作用的物理模型,并采用数值仿真得到了不同条件下的微波透射效果,分析了发光等离子体对高功率微波的防护性能。随后,实验研究了双层柱状等离子体阵...为研究发光等离子体对高功率微波的防护性能,建立了一维条件下等离子体与高功率微波相互作用的物理模型,并采用数值仿真得到了不同条件下的微波透射效果,分析了发光等离子体对高功率微波的防护性能。随后,实验研究了双层柱状等离子体阵列对6 GHz高功率微波脉冲的透射效果,实验结果与仿真结果相符,说明高功率微波的入射使等离子体产生了非线性效应。实验结果还表明,TE极化时的防护效果要优于TM极化时的防护效果;等离子体击穿场强阈值随电场作用空间的增大而减小;TE极化时等离子体对高功率微波脉冲的屏蔽效能最高可达13 d B,且随入射功率的增大而进一步增大。展开更多
开发了一种6~18 GHz宽带四路波导合成器,以标准双脊波导WRD500D36为基础,开发出了脊波导E面分支合成结构和脊波导阻抗变换结构。最终实现的四路波导合成器在带内驻波<2,插损<0.5 d B,合成效率>90%,并对该结构大功率合成的可行...开发了一种6~18 GHz宽带四路波导合成器,以标准双脊波导WRD500D36为基础,开发出了脊波导E面分支合成结构和脊波导阻抗变换结构。最终实现的四路波导合成器在带内驻波<2,插损<0.5 d B,合成效率>90%,并对该结构大功率合成的可行性进行了仿真预计。展开更多
An extensive 4 x 4 MIMO channel measurement is carried out at 6. 0-6. 4 GHz under a typical classroom environment with channel sounder based on vector network analyzer. Both LOS and NLOS scenarios are considered. The ...An extensive 4 x 4 MIMO channel measurement is carried out at 6. 0-6. 4 GHz under a typical classroom environment with channel sounder based on vector network analyzer. Both LOS and NLOS scenarios are considered. The results on path loss, delay spread and spatial correlation are presented. The measurement shows that, for corridor coverage, 2x2 MIMO is more economical than 4x4 MIMO due to high correlation. In order to identify the unique characteristics at the high frequency band, the measured channel parameters at 6. 0-6.4 GHz are compared with those at 2. 45 GHz. The comparison shows that the shortened wavelength of this higher frequency band results in a great difference of channel characteristics. Therefore, our measurement results provide new gnidance for the design and development of the system working on 6. 0-6.4 GHz band.展开更多
基金supported by the Beijing Natural Science Foundation under Grant L253002.
文摘With the rapid development and commercialization of wireless communications,the execution of OTA testing requires a tremendous amount of test time.Therefore,test time reduction is of great significance.The objective of this article is to determine optimal measurement grids for SISO OTA testing of 5G Sub-6 GHz user equipments(UEs)in anechoic chamber with satisfactory accuracy and efficiency.The effect of different grid configurations on OTA performance is analyzed quantitatively using reference radiation patterns at different bands.These patterns are utilized to mimic the worst-case radiation patterns of 5G Sub-6 GHz UEs.Subsequently,the associated measurement uncertainty(MU)terms are quantitatively analyzed and determined based on statistical analysis.According to the comparison of calculated MUs,reduction of grid points from currentlyrequired 62(30/30,Δθ/Δϕ)to 26(45/45)could achieve roughly 60%test time reduction for Sub-6 GHz,while still maintaining an uncertainty level of≤0.25 dB.These values can be further reduced to 14(60/60)with 80%reduction for Sub-3 GHz.More importantly,the recommended grid configurations in this research are applicable to both TIS and TRP testing.
文摘This article presents a compact crab-shaped reconfigurable antenna(CSRA)designed for 5G sub-6 GHz wireless applications. The antenna achieves enhanced gain in a miniaturized form factor by incorporating a hexagonal split-ring structure controlled via two radio frequency(RF) positive-intrinsicnegative(PIN) diodes(BAR64-02V). While the antenna is primarily designed to operate at 3.50 GHz for sub-6 GHz 5G applications, RF switching enables the CSRA to cover a broader frequency spectrum, including the S-band, X-band, and portions of the Ku-band. The proposed antenna offers several advantages: It is low-cost(fabricated on an FR-4 substrate), compact(achieving 64.07% size reduction compared to conventional designs), and features both frequency and gain reconfigurability through digitally controlled PIN diode switching. The reflection coefficients of the antenna, both without diodes and across all four switching states, were experimentally validated in the laboratory using a Keysight Field Fox microwave analyzer(N9916A, 14 GHz). The simulated radiation patterns and gain characteristics closely matched the measured values, demonstrating an excellent agreement. This study bridges the gap between traditional and next-generation antenna designs by offering a compact,cost-effective, and high-performance solution for multiband, reconfigurable wireless communication systems. The integration of double-split-ring resonators and dynamic reconfigurability makes the proposed antenna a strong candidate for various applications, including S-band and X-band systems, as well as the emerging lower 6G band(7.125 GHz–8.400 GHz).
基金supported in part by the National Natural Science Foundation of China under Grants 62325107,62341107,62261160650,and U23A20272in part by the Beijing Natural Science Foundation under Grant L222002.
文摘In this paper,we propose a sub-6GHz channel assisted hybrid beamforming(HBF)for mmWave system under both line-of-sight(LOS)and non-line-of-sight(NLOS)scenarios without mmWave channel estimation.Meanwhile,we resort to the selfsupervised approach to eliminate the need for labels,thus avoiding the accompanied high cost of data collection and annotation.We first construct the dense connection network(DCnet)with three modules:the feature extraction module for extracting channel characteristic from a large amount of channel data,the feature fusion module for combining multidimensional features,and the prediction module for generating the HBF matrices.Next,we establish a lightweight network architecture,named as LDnet,to reduce the number of model parameters and computational complexity.The proposed sub-6GHz assisted approach eliminates mmWave pilot resources compared to the method using mmWave channel information directly.The simulation results indicate that the proposed DCnet and LDnet can achieve the spectral efficiency that is superior to the traditional orthogonal matching pursuit(OMP)algorithm by 13.66% and 10.44% under LOS scenarios and by 32.35% and 27.75% under NLOS scenarios,respectively.Moreover,the LDnet achieves 98.52% reduction in the number of model parameters and 22.93% reduction in computational complexity compared to DCnet.
文摘为研究发光等离子体对高功率微波的防护性能,建立了一维条件下等离子体与高功率微波相互作用的物理模型,并采用数值仿真得到了不同条件下的微波透射效果,分析了发光等离子体对高功率微波的防护性能。随后,实验研究了双层柱状等离子体阵列对6 GHz高功率微波脉冲的透射效果,实验结果与仿真结果相符,说明高功率微波的入射使等离子体产生了非线性效应。实验结果还表明,TE极化时的防护效果要优于TM极化时的防护效果;等离子体击穿场强阈值随电场作用空间的增大而减小;TE极化时等离子体对高功率微波脉冲的屏蔽效能最高可达13 d B,且随入射功率的增大而进一步增大。
基金Sponsored by the National Natural Science Foundation of China(Grant No.61371101)the Shenzhen Biological,Internet,New Energy and New Materials Industry Development Project(Grant No.JC201104210030A)+2 种基金the Science and Technology Basic Research Project of Shenzhen(Grant No.JC200903120174A)the Research Innovation Fund Project of HIT(Grant No.HIT.NSFIR.2010133)the WINDOW-Towards Pervasive Indoor Wireless Networks,and the European Commission under its 7th Framework Program(Grant No.318992)
文摘An extensive 4 x 4 MIMO channel measurement is carried out at 6. 0-6. 4 GHz under a typical classroom environment with channel sounder based on vector network analyzer. Both LOS and NLOS scenarios are considered. The results on path loss, delay spread and spatial correlation are presented. The measurement shows that, for corridor coverage, 2x2 MIMO is more economical than 4x4 MIMO due to high correlation. In order to identify the unique characteristics at the high frequency band, the measured channel parameters at 6. 0-6.4 GHz are compared with those at 2. 45 GHz. The comparison shows that the shortened wavelength of this higher frequency band results in a great difference of channel characteristics. Therefore, our measurement results provide new gnidance for the design and development of the system working on 6. 0-6.4 GHz band.
