The objective of this ongoing joint research program is to determine how 3D/4D modeling, simulation and visualization of Products (buildings), Organizations and Processes (POP) can support lean construction. Initial f...The objective of this ongoing joint research program is to determine how 3D/4D modeling, simulation and visualization of Products (buildings), Organizations and Processes (POP) can support lean construction. Initial findings suggest that Process Design Pattern may have the potential to intuitively support ICT based lean construction. We initiated a 'Process Archeology' in order to reveal the requirements for tools that can support the planning, simulation and control of lean construction methods. First findings show that existing tools provide only limited support and therefore, we started to develop new methodologies and technologies to overcome these shortcomings. Through the introduction of Process Design Patterns, we intent to establish process thinking in the interdisciplinary POP design. Optimized construction processes may be synthesized with semi-automatic methods by applying Process Design Patterns on building structures. By providing process templates that integrate problem solution and expert knowledge, Process Design Patterns may have the potential to ensure high quality process models.展开更多
The continuous developing features in the design of mechanical product and based on 3D entity model is aimed at, and the extension of the 4-dimensional model with the process of designing, the knowledge described mode...The continuous developing features in the design of mechanical product and based on 3D entity model is aimed at, and the extension of the 4-dimensional model with the process of designing, the knowledge described model on the level of semantic understanding and summarizing the designing process and the way of discovering knowledge from multi-information model are studied. On the basis of designing the broad sensed collaborative system, through discussion of the relationship between the implicit knowledge of the users and the designing knowledge as well as commanding all the designing links, taking advantage of the way of concluding and deducting in the concept of the designers, the synthetic knowledge unit formed in the dynamic process from the conception design t9 the last design is schemed out, and the knowledge discovered principle in the dynamic designing process of the mechanical products and the key technology in its implementation under the milieu of network is brought forward.展开更多
基于电容耦合式非接触电导检测(C4D)技术,设计研发了一种新型径向结构的非接触式电导测量传感器。该传感器利用串联谐振的原理,引入电感模块以消除耦合电容对测量的不利影响,扩大了测量范围,提高了测量灵敏度。同时,用仿真与实验相结合...基于电容耦合式非接触电导检测(C4D)技术,设计研发了一种新型径向结构的非接触式电导测量传感器。该传感器利用串联谐振的原理,引入电感模块以消除耦合电容对测量的不利影响,扩大了测量范围,提高了测量灵敏度。同时,用仿真与实验相结合的方法对传感器的电极张角进行了优化研究。在5.0、7.5、9.1、10.2和12.0 mm 5种不同内径的管道中进行了电导测量实验,电导测量相对误差均不超过5%,实验结果表明,所设计的新型非接触式径向C^4D电导测量传感器是可行和有效的。展开更多
文摘The objective of this ongoing joint research program is to determine how 3D/4D modeling, simulation and visualization of Products (buildings), Organizations and Processes (POP) can support lean construction. Initial findings suggest that Process Design Pattern may have the potential to intuitively support ICT based lean construction. We initiated a 'Process Archeology' in order to reveal the requirements for tools that can support the planning, simulation and control of lean construction methods. First findings show that existing tools provide only limited support and therefore, we started to develop new methodologies and technologies to overcome these shortcomings. Through the introduction of Process Design Patterns, we intent to establish process thinking in the interdisciplinary POP design. Optimized construction processes may be synthesized with semi-automatic methods by applying Process Design Patterns on building structures. By providing process templates that integrate problem solution and expert knowledge, Process Design Patterns may have the potential to ensure high quality process models.
基金Selected from Proceedings of the 7th International Conference on Frontiers of DesignManufacturing(ICFDM'2006)This project is supported by National Natural Science Foundation of China(No.50275100)Key Scientific Technological Projects in Sichuan China(No.2006Z01-001-6).
文摘The continuous developing features in the design of mechanical product and based on 3D entity model is aimed at, and the extension of the 4-dimensional model with the process of designing, the knowledge described model on the level of semantic understanding and summarizing the designing process and the way of discovering knowledge from multi-information model are studied. On the basis of designing the broad sensed collaborative system, through discussion of the relationship between the implicit knowledge of the users and the designing knowledge as well as commanding all the designing links, taking advantage of the way of concluding and deducting in the concept of the designers, the synthetic knowledge unit formed in the dynamic process from the conception design t9 the last design is schemed out, and the knowledge discovered principle in the dynamic designing process of the mechanical products and the key technology in its implementation under the milieu of network is brought forward.
文摘基于电容耦合式非接触电导检测(C4D)技术,设计研发了一种新型径向结构的非接触式电导测量传感器。该传感器利用串联谐振的原理,引入电感模块以消除耦合电容对测量的不利影响,扩大了测量范围,提高了测量灵敏度。同时,用仿真与实验相结合的方法对传感器的电极张角进行了优化研究。在5.0、7.5、9.1、10.2和12.0 mm 5种不同内径的管道中进行了电导测量实验,电导测量相对误差均不超过5%,实验结果表明,所设计的新型非接触式径向C^4D电导测量传感器是可行和有效的。
