期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
制冷空调产品电量测量异常分析
1
作者 马金平 程立权 +2 位作者 孔晓鸣 夏玲 张伟 《制冷与空调》 2008年第1期85-88,共4页
3P4W功率测量方式是制冷空调产品性能试验装置中最广泛采用的电量测量方法,初次接线时或由于测量仪表定期标定等原因而重新拆装后经常会出现测量结果异常的现象,对于一些大型多互感器切换的复杂系统,要想很快找到错误的原因比较困难。... 3P4W功率测量方式是制冷空调产品性能试验装置中最广泛采用的电量测量方法,初次接线时或由于测量仪表定期标定等原因而重新拆装后经常会出现测量结果异常的现象,对于一些大型多互感器切换的复杂系统,要想很快找到错误的原因比较困难。本文通过向量图分析,列举各类异常的可能情况,并提出一种直接查表确定问题原因的分析方法。 展开更多
关键词 3p4w 功率测量 接线错误 功率因数
在线阅读 下载PDF
三相四线系统中SPWM与SVPWM的归一化研究 被引量:24
2
作者 陈瑶 金新民 童亦斌 《电工技术学报》 EI CSCD 北大核心 2007年第12期122-127,共6页
对三相三线(3P3W)和三相四线(3P4W)两种接线制式下正弦脉宽调制(SPWM)和空间矢量脉宽调制(SVPWM)的发生原理和数字实现进行了深入分析,通过数学计算推导证明了3P4W系统中SPWM和SVPWM的归一化,并给出了相关波形对这一结论进行验证。研究... 对三相三线(3P3W)和三相四线(3P4W)两种接线制式下正弦脉宽调制(SPWM)和空间矢量脉宽调制(SVPWM)的发生原理和数字实现进行了深入分析,通过数学计算推导证明了3P4W系统中SPWM和SVPWM的归一化,并给出了相关波形对这一结论进行验证。研究表明,虽然3P3W系统中SVPWM在谐波抑制和直流电压利用率上均优于SPWM,但在3P4W系统中两者从控制效果上看是一致的,而此时SPWM因其算法简单、易于实现而优于SVPWM,从而在工程应用上更具优势。 展开更多
关键词 正弦脉宽调制 空间矢量脉宽调制 三相三线 三相四线 数字实现 归一化
在线阅读 下载PDF
电沉积(Ni-W-P)-Si_3N_4复合镀层及性能研究 被引量:5
3
作者 宋振兴 姚素薇 +1 位作者 王宏智 张卫国 《电镀与精饰》 CAS 2007年第2期16-19,共4页
采用电沉积方法,在Ni-W-P合金中复合S i3N4微粒,获得(Ni-W-P)-S i3N4复合镀层。研究了镀液中Si3N4质量浓度、电流密度以及搅拌速度等工艺条件对复合镀层中Si3N4质量分数的影响。X-射线衍射、扫描电子显微镜测试结果表明:Si3N4微粒在镀... 采用电沉积方法,在Ni-W-P合金中复合S i3N4微粒,获得(Ni-W-P)-S i3N4复合镀层。研究了镀液中Si3N4质量浓度、电流密度以及搅拌速度等工艺条件对复合镀层中Si3N4质量分数的影响。X-射线衍射、扫描电子显微镜测试结果表明:Si3N4微粒在镀层中均匀分布,与Ni-W-P合金各自在特定的角度出现衍射特征峰,彼此之间互不干扰。随着镀层中Si3N4质量分数的增加,镀层的性能均按照一定的规律发生变化。当Si3N4的质量分数为最大值10.3%时,镀层性能在各组实验比较中均最优,耐磨性能最好。 展开更多
关键词 电沉积 (Ni—W—P)-Si3N4复合镀层 耐磨性
在线阅读 下载PDF
应用于车载充电机的三相四线制差共模集成电感——一种带“准十字”差模磁支路的差共模集成电感 被引量:1
4
作者 杨海军 卢增艺 《电源学报》 CSCD 北大核心 2024年第5期325-330,共6页
随着环保、节能意识不断深入人心,对新能源电动汽车及其车载充电机的要求越来越高。磁性元件作为车载充电机中一类重要的元器件,也相应获得越来越广泛的关注与研究。针对车载充电机抗电磁干扰滤波电路中三相四线制差共模电感的集成进行... 随着环保、节能意识不断深入人心,对新能源电动汽车及其车载充电机的要求越来越高。磁性元件作为车载充电机中一类重要的元器件,也相应获得越来越广泛的关注与研究。针对车载充电机抗电磁干扰滤波电路中三相四线制差共模电感的集成进行理论分析和研究。基于电源应用背景、差共模电感集成原理及业界和学术界已有集成方案的对比分析,提出1种采用“准十字”差模磁支路的三相四线制差共模集成电感,通过对集成电感单体的磁场特性分析、偏磁情况下的电气性能研究及上机测试,验证了所提集成方案的有效性,可显著减小三相不平衡电流情况下差模磁支路的偏磁问题并有效帮助电源改善抗电磁干扰性能。 展开更多
关键词 “准十字” 磁集成 差模 共模 三相四线制
在线阅读 下载PDF
三相三线电度表计量TN系统负载误差的分析与改进
5
作者 邵长琚 《冶金动力》 2017年第7期1-2,共2页
对三相三线有功电能表计量三相四线制系统负荷时的误差进行了分析,结合实际,提出并实施了"三相三线电能表+单相电能表"计量方法。
关键词 电能计量 误差 三相三线 三相四线
在线阅读 下载PDF
Analysis on Circulating Current and Split Capacitor Voltage Balance for Modular Multilevel Converter Based Three-phase Four-wire Split Capacitor DSTATCOM 被引量:2
6
作者 Lei Lin Jialu He Chen Xu 《Journal of Modern Power Systems and Clean Energy》 SCIE EI CSCD 2021年第3期657-667,共11页
We propose a modular multilevel converter(MMC)based three-phase four-wire(3P4W)split capacitor distribution static synchronous compensator(DSTATCOM),aiming at compensating unbalanced and reactive load currents.Due to ... We propose a modular multilevel converter(MMC)based three-phase four-wire(3P4W)split capacitor distribution static synchronous compensator(DSTATCOM),aiming at compensating unbalanced and reactive load currents.Due to the zero-sequence current compensation,the circulating current char-acteristics of 3P4W MMC-DSTATCOM are different from conventional MMCs.Moreover,the distinct working principle of IMMC would affect the features of split capacitor voltage.The decoupled positive-,negative-and zero-sequence second-order and DC components of the circulating current are deduced explicitly.Two proportional-integral controllers with dual dq transformation are employed to suppress the positive-and negative-sequence components of second-order circulating current,while quasi proportional-resonance controller is designed to eliminate the zero-sequence component.Besides,the phenomenon of the unbalanced split capacitor voltages is revealed,and fast-tracking balancing method by controlling zero-sequence current flowing through the split capacitors is provided.Digital simulation results verify the accuracy of the analysis and the feasibility of the suppression methods. 展开更多
关键词 Circulating current modular multilevel converter(MMC) distribution static synchronous compensator(DSTATCOM) split capacitor three-phase four-wire(3p4w)
原文传递
Coordinated Control of Parallel Three-phase Four-wire Converters in Autonomous AC Microgrids
7
作者 Rui Liu Li Guo Xialin Li 《CSEE Journal of Power and Energy Systems》 SCIE EI CSCD 2024年第5期2065-2078,共14页
The coordinated control of parallel three-phase fourwire converters in autonomous AC microgrids is investigated in this paper.First,based on droop control,virtual impedance is inserted in positive-,negative-and zero-s... The coordinated control of parallel three-phase fourwire converters in autonomous AC microgrids is investigated in this paper.First,based on droop control,virtual impedance is inserted in positive-,negative-and zero-sequences to enhance system damping and imbalance power sharing.Then,to facilitate virtual impedance design,small signal models of the three-sequence equivalent circuits are established respectively.Corresponding indexes are proposed to comprehensively evaluate the impact of sequence virtual impedance on current sharing accuracy,voltage quality at the point of common coupling(PCC)and system stability.In addition,constraint of DClink voltage is also considered to avoid over modulation when subjected to unbalanced loads.Furthermore,to address the PCC voltage degradation resulting from virtual impedance,a voltage imbalance compensation method,based on low-bandwidth communication,is proposed.Finally,simulation and experimental results are provided to verify the correctness of the theory model,indicating that the proposed method can achieve PCC voltage restoration while guaranteeing the current sharing accuracy with desirable dynamics. 展开更多
关键词 AC microgrids sequence virtual impedance three-phase four-wire(3p4w)converter voltage imbalance compensation
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部