This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are ob...This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are obtained.Pore structures are segmented by the U-shaped network(U-Net)neural network integrated with the Canny edge detection operator,ensuring accurate pore delineation and edge extraction.The trained U-Net achieves 98.55%accuracy.The 2D data are superimposed and processed into 3D point clouds,enabling reconstruction of the pore structure and aluminum skeleton.Analysis of pore 01 shows the cross-sectional area initially increases,and then decreases with milling depth,with a uniform point distribution of 40 per layer.The reconstructed model exhibits a porosity of 77.5%,with section overlap rates between the 2D pore segmentation and the reconstructed model exceeding 96%,confirming high fidelity.Equivalent sphere diameters decrease with size,averaging 1.95 mm.Compression simulations reveal that the stress-strain curve of the 3D reconstruction model of aluminum foam exhibits fluctuations,and the stresses in the reconstruction model concentrate on thin cell walls,leading to localized deformations.This method accurately restores the aluminum foam’s complex internal structure,improving reconstruction preci-sion and simulation reliability.The approach offers a cost-efficient,high-precision technique for optimizing material performance in engineering applications.展开更多
Here presented is a matrix representation of recursive number sequences of order 3 defined by an = pa（n-1） ＋ qa（n-2） ＋ ra（n-3） with arbitrary initial conditions a0, a1 = 0, and a2 and their special cases of Pa...Here presented is a matrix representation of recursive number sequences of order 3 defined by an = pa（n-1） ＋ qa（n-2） ＋ ra（n-3） with arbitrary initial conditions a0, a1 = 0, and a2 and their special cases of Padovan number sequence and Perrin number sequence with initial conditions a0 = a1 = 0 and a2 = 1 and a0 = 3, a1 = 0, and a2 = 2, respectively. The matrix representation is used to construct many well known and new identities of recursive number sequences as well as Pavodan and Perrin sequences.展开更多
Development of efficient gene prediction algorithms is one of the fundamental efforts in gene prediction study in the area of genomics. In genomic signal processing the basic step of the identification of protein codi...Development of efficient gene prediction algorithms is one of the fundamental efforts in gene prediction study in the area of genomics. In genomic signal processing the basic step of the identification of protein coding regions in DNA sequences is based on the period-3 property exhibited by nucleotides in exons. Several approaches based on signal processing tools and numerical representations have been applied to solve this problem, trying to achieve more accurate predictions. This paper presents a new indicator sequence based on amino acid sequence, called as aminoacid indicator sequence, derived from DNA string that uses the existing signal processing based time-domain and frequency domain methods to predict these regions within the billions long DNA sequence of eukaryotic cells which reduces the computational load by one-third. It is known that each triplet of bases, called as codon, instructs the cell machinery to synthesize an amino acid. The codon sequence therefore uniquely identifies an amino acid sequence which defines a protein. Thus the protein coding region is attributed by the codons in amino acid sequence. This property is used for detection of period-3 regions using amino acid sequence. Physico-chemical properties of amino acids are used for numerical representation. Various accuracy measures such as exonic peaks, discriminating factor, sensitivity, specificity, miss rate, wrong rate and approximate correlation are used to demonstrate the efficacy of the proposed predictor. The proposed method is validated on various organisms using the standard data-set HMR195, Burset and Guigo and KEGG. The simulation result shows that the proposed method is an effective approach for protein coding prediction.展开更多
This research is focused on the analysis of the sequence stratigraphic units of F3 Block,within a wave-dominated delta of Plio–Pleistocene age.Three wells of F3 block and a 3D seismic data,are utilized in this resear...This research is focused on the analysis of the sequence stratigraphic units of F3 Block,within a wave-dominated delta of Plio–Pleistocene age.Three wells of F3 block and a 3D seismic data,are utilized in this research.The conventional techniques of 3D seismic interpretation were utilized to mark the 11 surfaces on the seismic section.Integration of seismic sequence stratigraphic interpretation,using well logs,and subsequent 3D geostatistical modeling,using seismic data,aided to evaluate the shallow hydrocarbon traps.The resulting models were obtained using System Tract and Facies models,which were generated by using sequential stimulation method and their variograms made by spherical method,moreover,these models are validated via histograms.The CDF curve generated from upscaling of well logs using geometric method,shows a good relation with less percentage of errors(1 to 2 for Facies and 3 to 4 for System Tract models)between upscaled and raw data that complements the resulted models.These approaches help us to delineate the best possible reservoir,lateral extent of system tracts(LST and/or HST)in the respective surface,and distribution of sand and shale in the delta.The clinoform break points alteration observed on seismic sections,also validates the sequence stratigraphic interpretation.The GR log-based Facies model and sequence stratigraphy-based System Tract model of SU-04-2 showed the reservoir characteristics,presence of sand bodies and majorly LST,respectively,mainly adjacent to the main fault of the studied area.Moreover,on the seismic section,SU-04-2 exhibits the presence of gas pockets at the same location that also complements the generated Facies and System Tract models.The generated models can be utilized for any similar kind of study and for the further research in the F3 block reservoir characterization.展开更多
Soybean mosaic virus （SMV）, a member of the genus Potyvirus, is a major pathogen of soybean plants in China, and 16 SMV strains have been identified nationwide based on a former detailed SMV classification system. A...Soybean mosaic virus （SMV）, a member of the genus Potyvirus, is a major pathogen of soybean plants in China, and 16 SMV strains have been identified nationwide based on a former detailed SMV classification system. As the P3 gene is thought to be involved in viral replication, systemic infection, pathogenicity, and overcoming resistance, knowledge of the P3 gene sequences of SMV and other potyviruses would be useful in efforts to know the genetic relationships among them and control the disease. P3 gene sequences were obtained from representative isolates of the above-mentioned 16 SMV strains and were compared with other SMV strains and 16 Potyvirus species from the National Center for Biotechnology GenBank database. The P3 genes from the 16 SMV isolates are composed of 1041 nucleotides, encoding 347 amino acids, and share 90.7-100% nucleotide （NT） sequence identities and 95.1-100% amino acid （AA） sequence identities. The P3 coding regions of the 16 SMV isolates share high identities （92.4-98.9% NT and 96.0-100% AA） with the reported Korean isolates, followed by the USA isolates （88.5-97.9% NT and 91.4-98.6% AA）, and share low identities （80.5-85.2% NT and 82.1-84.7% AA） with the reported HZ 1 and P isolates from Pinellia ternata. The sequence identities of the P3 genes between SMV and the 16 potyviruses varied from 44.4 to 81.9% in the NT sequences and from 21.4 to 85.3% in the AA sequences, respectively. Among them, SMV was closely related to Watermelon mosaic virus （WMV）, with 76.0-81.9% NT and 77.5-85.3% AA identities. In addition, the SMV isolates and potyvirus species were clustered into six distinct groups. All the SMV strains isolated from soybean were clustered in Group I, and the remaining species were clustered in other groups. A multiple sequence alignment analysis of the C-terminal regions indicated that the P3 genes within a species were highly conserved, whereas those among species were relatively variable.展开更多
Forecasting subtle traps by sequence stratigraphy and 3D seismic data is a sensitive topic in hydrocarbon exploration. Research on subtle traps by geophysical data is the most popular and difficult. Based on the suffi...Forecasting subtle traps by sequence stratigraphy and 3D seismic data is a sensitive topic in hydrocarbon exploration. Research on subtle traps by geophysical data is the most popular and difficult. Based on the sufficiently drilling data, log data, core data and 3D seismic data, sediment sequence of Qikou depression, Huanghua basin was partitioned by using sequence stratigraphy theory. Each sediment sequence system mode was built. Sediment faces of subtle traps were pointed out. Dominating factors forming subtle traps were analyzed. Sandstone seismic rock physics and its response were studied in Tertiary System. Sandstone geophysical response and elastic modulus vary laws with pressure, temperature, porosity, depth were built. Experimental result and practice shows that it is possible using seismic information forecasting subtle traps. Integrated using geology, log, drilling data, special seismic processing technique, interpretation technique, high precision horizon calibration technique, 3D seismic visualizing interpretation, seismic coherence analysis, attribute analysis, logging-constrained inversion, time frequency analysis, subtle trapsobject is identified and interpreted. Finally, advantage object of subtle trap in this area was determined. Bottomland sand stratigraphic and lithologic reservoirs in Qinan slope zone have been founded by means of high resolution 3D seismic data field technique, high resolution 3D seismic data processing technique and seismic wave impendence inversion technique.展开更多
Hydrothermal stability is crucial for the practical application of deNO_(x)catalyst on diesel vehicles,for the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR).SnO_(2)-based materials possess superior hy...Hydrothermal stability is crucial for the practical application of deNO_(x)catalyst on diesel vehicles,for the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR).SnO_(2)-based materials possess superior hydrothermal stability,which is attractive for the development of NH_(3)-SCR catalyst.In this work,a series of Ce-Nb/SnO_(2)catalysts,with Ce and Nb loading on SnO_(2)support,were prepared by impregnation method.It was found that,the NH_(3)-SCR activities and hydrothermal stabilities of the Ce-Nb/SnO_(2)catalysts significantly varied with the impregnation sequences,and the Ce-Nb(f)/SnO_(2) catalyst that firstly impregnated Nb and then impregnated Ce exhibited the best performance.The characterization results revealed that CeNb(f)/SnO_(2)possessed appropriate acidity and redox capability.Furthermore,the strong synergistic effect between Nb and Sn species stabilized the structure and maintained the dispersion of acid sites.This study may provide a new understanding for the effect of impregnation sequence on activity and hydrothermal stability and a new environmental-friendly NH_(3)-SCR catalyst with potential applications for NO_(x)removal from diesel and hydrogenfueled engines.展开更多
Type division and controlling factor analysis of 3rd-order sequence are of practical significance to tec-tonic analysis, sedimentary environment identification, and other geological researches. Based on the comprehens...Type division and controlling factor analysis of 3rd-order sequence are of practical significance to tec-tonic analysis, sedimentary environment identification, and other geological researches. Based on the comprehensive analysis of carbon and oxygen isotope trends, paleobathymetry and spectral-frequency of representative well logs, 3rd-order sequences can be divided into 3 types： （a） global sea level （GSL） sequence mainly controlled by GSL change;（b） tectonic sequence mainly controlled by regional tectonic activity;and （c） composite sequence jointly controlled by GSL change and regional tectonic activity. This study aims to identify the controlling factors of 3rd-order sequences and to illustrate a new method for classification of 3rd-order sequences of the middle Permian strata in the Sichuan Basin, China. The middle Permian strata in the Sichuan Basin consist of 3 basin-contrastive 3rd-order sequences, i.e., PSQ1, PSQ2 and PSQ3. Of these, PSQ1 is a GSL sequence while PSQ2 and PSQ3 are composite sequences. The results suggest that the depositional environment was stable during the deposition of PSQ1, but was activated by tectonic activity during the deposition of the middle Permian Maokou Formation.展开更多
Border-associated macrophages are located at the interface between the brain and the periphery, including the perivascular spaces, choroid plexus, and meninges. Until recently, the functions of border-associated macro...Border-associated macrophages are located at the interface between the brain and the periphery, including the perivascular spaces, choroid plexus, and meninges. Until recently, the functions of border-associated macrophages have been poorly understood and largely overlooked. However, a recent study reported that border-associated macrophages participate in stroke-induced inflammation, although many details and the underlying mechanisms remain unclear. In this study, we performed a comprehensive single-cell analysis of mouse border-associated macrophages using sequencing data obtained from the Gene Expression Omnibus(GEO) database(GSE174574 and GSE225948). Differentially expressed genes were identified, and enrichment analysis was performed to identify the transcription profile of border-associated macrophages. CellChat analysis was conducted to determine the cell communication network of border-associated macrophages. Transcription factors were predicted using the ‘pySCENIC' tool. We found that, in response to hypoxia, borderassociated macrophages underwent dynamic transcriptional changes and participated in the regulation of inflammatory-related pathways. Notably, the tumor necrosis factor pathway was activated by border-associated macrophages following ischemic stroke. The pySCENIC analysis indicated that the activity of signal transducer and activator of transcription 3(Stat3) was obviously upregulated in stroke, suggesting that Stat3 inhibition may be a promising strategy for treating border-associated macrophages-induced neuroinflammation. Finally, we constructed an animal model to investigate the effects of border-associated macrophages depletion following a stroke. Treatment with liposomes containing clodronate significantly reduced infarct volume in the animals and improved neurological scores compared with untreated animals. Taken together, our results demonstrate comprehensive changes in border-associated macrophages following a stroke, providing a theoretical basis for targeting border-associated macrophages-induced neuroinflammation in stroke treatment.展开更多
By screening the worker （Apis cerana cerana） heads cDNA library using a fragment of the mrjp3 gene of Apis cerana as probe, 120 positive clones were obtained. The clone containing A. cerana cerana MRJP3 （AccMRJP3）...By screening the worker （Apis cerana cerana） heads cDNA library using a fragment of the mrjp3 gene of Apis cerana as probe, 120 positive clones were obtained. The clone containing A. cerana cerana MRJP3 （AccMRJP3） cDNA was selected. Based on the sequencing of the inserts of the positive clone, a sequence of AccMRJP3 cDNA which is 1 887 bp long including a poly （A） tail was obtained. The AccMRJP3 cDNA encompassed an open-reading frame （ORF） with 1 779 bp encoding 593 amino acids. The un-translated regions （UTR） of the 5′ end and 3′end are 46 bp and 160 bp in length, respectively. Similar to AmMRJP3 and AdMRJP3, the putative AccMRJP3 also has a repetitive region. The comparison of the repetitive region of AccMRJP3, AmMRJP3 and AdMRJP3 shows some differences between them.展开更多
Genetic manipulation(either restraint or enhancement)of the biosynthesis pathway ofα-linolenic acid(ALA)in seed oil is an important goal in Brassica napus breeding.B.napus is a tetraploid plant whose genome often har...Genetic manipulation(either restraint or enhancement)of the biosynthesis pathway ofα-linolenic acid(ALA)in seed oil is an important goal in Brassica napus breeding.B.napus is a tetraploid plant whose genome often har-bors four and six homologous copies,respectively,of the two fatty acid desaturases FAD2 and FAD3,which con-trol the last two steps of ALA biosynthesis during seed oil accumulation.In this study,we compared their promoters,coding sequences,and expression levels in three high-ALA inbred lines 2006L,R8Q10,and YH25005,a low-ALA line A28,a low-ALA/high-oleic-acid accession SW,and the wildtype ZS11.The expression levels of most FAD2 and FAD3 homologs in the three high-ALA accessions were higher than those in ZS11 and much higher than those in A28 and SW.The three high-ALA accessions shared similar sequences with the pro-moters and CDSs of BnFAD3.C4 and BnFAD3.A3.In A28 and SW,substitution of three amino acid residues in BnFAD2.A5 and BnFAD2.C5,an absence of BnFAD2.C1 locus,and a 549 bp long deletion on the BnFAD3.A3 promoter were detected.The profile of BnFAD2 mutation in the two low-ALA accessions A28 and SW is different from that reported in previous studies.The mutations in BnFAD3 in the high-ALA accessions are reported for thefirst time.In identifying the sites of these mutations,we provide detailed information to aid the design of mole-cular markers for accelerated breeding schemes.展开更多
The parental material of soils in the Qilian Mountains of northwest China is mainly aeolian loess containing CaCO3 which may remain in soils under the semiarid-arid climate. To disclose the CaCO3 characteristics chang...The parental material of soils in the Qilian Mountains of northwest China is mainly aeolian loess containing CaCO3 which may remain in soils under the semiarid-arid climate. To disclose the CaCO3 characteristics change with the altitude and the terrain attributes, we surveyed 18 soil profiles in an altitude sequence from 3076 m to 4510 m in the Hulugou Watershed in the Qilian Mountains, measured CaCO3 contents of all genetic horizon samples, analyzed the densities, illuviation modes and depths of CaCO3 in the profiles, extracted values of the terrain attributes of the profiles including altitude slope, aspect, plane curvature, profile curvature and terrain wetness index (TWI) from the 90 m resolution SRTM3 DEM data on ArcGIS 9.3 platform. We found that CaCO3 weighted content of the profiles ranged from 1.30 g·kg-1 to 93.09 g·kg-1, CaCO3 density from 0.05 kg/m2 to 75.69 kg/m2, CaCO3 illuviation depth from 12 cm to 54 cm. CaCO3 illuviation modes could be divided into three types, i.e., no illuviation mode in which the profile has only A horizon or CaCO3 content -1, middle illuviation mode in which CaCO3 accumulated in a middle horizon, and down illuviation mode in which CaCO3 content increases with the depth. CaCO3 weighted content, density and illuviation depth had significant correlation with certain terrain attributes. In general, the altitude sequence is an effective way to study CaCO3 characteristics in the alpine region, and the data of terrain attributes which can influence the precipitation and its redistribution in soil are potential in predicting soil CaCO3 characteristics in the alpine region.展开更多
The basic parameters,seismogenic structure and seismic sequences characteristics of the Yutian MS7. 3 earthquake on February 12,2014 are introduced and compared to the Yutian MS7. 3 earthquake in 2008. The results sho...The basic parameters,seismogenic structure and seismic sequences characteristics of the Yutian MS7. 3 earthquake on February 12,2014 are introduced and compared to the Yutian MS7. 3 earthquake in 2008. The results show that the MS5. 4 earthquake is regarded as an immediate foreshock of the Yutian MS7. 3 main shock. The frequency of strong aftershock sequences was low and their number declined quickly,and the maximum aftershock was a MS5. 7 earthquake. According to analysis of the historical earthquake sequence type,and parameter of h-value,b-value and energy release ratio between main shock and sequence etc.,we found the preliminary conclusion that the Yutian MS7. 3 earthquake sequence in 2014 was a foreshock-main shock-aftershock type.展开更多
The phase change of lacustrine gravity flow deposition is fast and complex. In its reservoir division and correlation, the isochronous problem is very important. Taking the oil formation I of Es3 in Wuhaozhuang oilfie...The phase change of lacustrine gravity flow deposition is fast and complex. In its reservoir division and correlation, the isochronous problem is very important. Taking the oil formation I of Es3 in Wuhaozhuang oilfield as an example, through the analysis of stratigraphic drilling and logging data in the study area, according to the genetic types of different levels of base level cycle interfaces and the characteristics of high-resolution sequence stratigraphy, this paper subdivides the lacustrine gravity flow oil layer of lower Es3 in Wuhaozhuang Oilfield, divides it into four short-term base level cycle sequences, and establishes the high-resolution isochronous stratigraphic framework of this interval. It is found that the mid-term, short-term and ultra short-term base level cycles correspond to the oil formation, sand layer group and single layer in the oil layer correlation unit of the oilfield respectively. Based on this, the oil layer correlation unit of the interval is divided, and the sublayer correlation model is established according to the identification characteristics of the short-term base level cycle.展开更多
In this paper,the seismogenic structures of the Da Qaidam strong earthquakes are preliminarily discussed by using the regional seismotectonic data and focal mechanism solutions. Analysis is done on the temporal and sp...In this paper,the seismogenic structures of the Da Qaidam strong earthquakes are preliminarily discussed by using the regional seismotectonic data and focal mechanism solutions. Analysis is done on the temporal and spatial distribution characteristics of the two strong earthquake sequences in Da Qaidam in combination with the sequence distribution characteristics of the M6. 6 earthquake of 2003 and the five strong earthquakes of about M5. 0 in 2004 in Delingha. At the same time,the regional characteristics of the historical seismic activity are also investigated. Preliminary analysis is done on the influence of the two M8. 0 earthquakes in the past 10 years on this region. Precursory anomalies and their characteristics are discussed in combination with the analysis of the precursor observation data of Qinghai Province.展开更多
目的:评价磁共振成像(MRI)三维可变翻转角快速自旋回波(3D-sampling perfection with applicationoptimized contrasts by using different filp angle evolutions,3D-SPACE)序列结合不同图像融合技术获得的图像对垂体大腺瘤术前评估的...目的:评价磁共振成像(MRI)三维可变翻转角快速自旋回波(3D-sampling perfection with applicationoptimized contrasts by using different filp angle evolutions,3D-SPACE)序列结合不同图像融合技术获得的图像对垂体大腺瘤术前评估的应用价值。方法:收集中南大学湘雅医院43例术后证实为垂体大腺瘤患者的MRI资料,包括常规MRI平扫+增强、3D-SPACE T2WI和3D-SPACE T1WI+C(增强)的影像资料。3D-SPACE T2WI/3D-SPACE T1WI+C序列分别采用正相+正相、反相+正相、正相+反相、反相+反相以及正相伪彩+正相、正相+正相伪彩6种组合方式融合,由两名放射科高年资主治医生采用半定量方法对不同组合方式图像质量进行评价及比较,得到最佳融合模式;并根据肿瘤对视交叉、动眼神经、海绵窦血管的侵袭程度,按照三级评分制对MRI平扫+增强(常规MRI增强组),3DSPACE T2WI,3D-SPACE T1WI+C及2种3D-SPACE序列融合(融合组)的图像进行评估,以术中观察结果为金标准,采用Fisher概率确切法比较4组图像显示垂体大腺瘤对周围组织侵袭程度与金标准的一致性。结果:Kruskal-Wallis H秩和检验结果显示6种图像融合模式中,以3D-SPACE T1WI+C正相伪彩与3D-SPACE T2WI正相融合图像质量最优(P<0.05)。比较肿瘤对动眼神经侵袭程度I,II,III级关系一致性时,MRI增强组、3D-SPACE T1WI+C组、3DSPACE T2WI组、融合组4组图像差异均无统计学意义(均P>0.05);比较肿瘤对视交叉侵袭程度I级关系一致性时,4组图像差异均无统计学意义(均P>0.05),比较侵袭程度II,III级关系一致性时,融合组图像与3D-SPACE T2WI组差异无统计学意义(P>0.05),但均明显优于常规MRI增强组(均P<0.01)和3D-SPACE T1WI+C组(均P<0.05);比较肿瘤对海绵窦血管侵袭程度I,III级关系一致性时,4组图像差异均无统计学意义(均P>0.05),比较侵袭程度II级关系一致性时,融合组图像与3D-SPACE T1WI+C组差异无统计学意义(P>0.05),但均明显优于常规MRI增强组(均P<0.01)和3D-SPACE T2WI组(均P<0.05)。结论:MRI 3D-SPACE序列结合图像融合技术在显示垂体大腺瘤对颅底血管神经的侵袭程度上明显优于常规MRI序列,在显示肿瘤与视交叉II,III级侵袭关系及肿瘤与海绵窦血管II级侵袭关系上明显优于单独的3D-SPACE序列,对于手术前的风险评估及手术方案的制订有良好的应用前景。展开更多
基金supported by the Key Research and DevelopmentPlan in Shanxi Province of China(No.201803D421045)the Natural Science Foundation of Shanxi Province(No.2021-0302-123104)。
文摘This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are obtained.Pore structures are segmented by the U-shaped network(U-Net)neural network integrated with the Canny edge detection operator,ensuring accurate pore delineation and edge extraction.The trained U-Net achieves 98.55%accuracy.The 2D data are superimposed and processed into 3D point clouds,enabling reconstruction of the pore structure and aluminum skeleton.Analysis of pore 01 shows the cross-sectional area initially increases,and then decreases with milling depth,with a uniform point distribution of 40 per layer.The reconstructed model exhibits a porosity of 77.5%,with section overlap rates between the 2D pore segmentation and the reconstructed model exceeding 96%,confirming high fidelity.Equivalent sphere diameters decrease with size,averaging 1.95 mm.Compression simulations reveal that the stress-strain curve of the 3D reconstruction model of aluminum foam exhibits fluctuations,and the stresses in the reconstruction model concentrate on thin cell walls,leading to localized deformations.This method accurately restores the aluminum foam’s complex internal structure,improving reconstruction preci-sion and simulation reliability.The approach offers a cost-efficient,high-precision technique for optimizing material performance in engineering applications.
文摘Here presented is a matrix representation of recursive number sequences of order 3 defined by an = pa（n-1） ＋ qa（n-2） ＋ ra（n-3） with arbitrary initial conditions a0, a1 = 0, and a2 and their special cases of Padovan number sequence and Perrin number sequence with initial conditions a0 = a1 = 0 and a2 = 1 and a0 = 3, a1 = 0, and a2 = 2, respectively. The matrix representation is used to construct many well known and new identities of recursive number sequences as well as Pavodan and Perrin sequences.
文摘Development of efficient gene prediction algorithms is one of the fundamental efforts in gene prediction study in the area of genomics. In genomic signal processing the basic step of the identification of protein coding regions in DNA sequences is based on the period-3 property exhibited by nucleotides in exons. Several approaches based on signal processing tools and numerical representations have been applied to solve this problem, trying to achieve more accurate predictions. This paper presents a new indicator sequence based on amino acid sequence, called as aminoacid indicator sequence, derived from DNA string that uses the existing signal processing based time-domain and frequency domain methods to predict these regions within the billions long DNA sequence of eukaryotic cells which reduces the computational load by one-third. It is known that each triplet of bases, called as codon, instructs the cell machinery to synthesize an amino acid. The codon sequence therefore uniquely identifies an amino acid sequence which defines a protein. Thus the protein coding region is attributed by the codons in amino acid sequence. This property is used for detection of period-3 regions using amino acid sequence. Physico-chemical properties of amino acids are used for numerical representation. Various accuracy measures such as exonic peaks, discriminating factor, sensitivity, specificity, miss rate, wrong rate and approximate correlation are used to demonstrate the efficacy of the proposed predictor. The proposed method is validated on various organisms using the standard data-set HMR195, Burset and Guigo and KEGG. The simulation result shows that the proposed method is an effective approach for protein coding prediction.
文摘This research is focused on the analysis of the sequence stratigraphic units of F3 Block,within a wave-dominated delta of Plio–Pleistocene age.Three wells of F3 block and a 3D seismic data,are utilized in this research.The conventional techniques of 3D seismic interpretation were utilized to mark the 11 surfaces on the seismic section.Integration of seismic sequence stratigraphic interpretation,using well logs,and subsequent 3D geostatistical modeling,using seismic data,aided to evaluate the shallow hydrocarbon traps.The resulting models were obtained using System Tract and Facies models,which were generated by using sequential stimulation method and their variograms made by spherical method,moreover,these models are validated via histograms.The CDF curve generated from upscaling of well logs using geometric method,shows a good relation with less percentage of errors(1 to 2 for Facies and 3 to 4 for System Tract models)between upscaled and raw data that complements the resulted models.These approaches help us to delineate the best possible reservoir,lateral extent of system tracts(LST and/or HST)in the respective surface,and distribution of sand and shale in the delta.The clinoform break points alteration observed on seismic sections,also validates the sequence stratigraphic interpretation.The GR log-based Facies model and sequence stratigraphy-based System Tract model of SU-04-2 showed the reservoir characteristics,presence of sand bodies and majorly LST,respectively,mainly adjacent to the main fault of the studied area.Moreover,on the seismic section,SU-04-2 exhibits the presence of gas pockets at the same location that also complements the generated Facies and System Tract models.The generated models can be utilized for any similar kind of study and for the further research in the F3 block reservoir characterization.
基金supported by the National Natural Science Foundation of China(30671266,31101164)the National Basic Research Program of China(2006CB101708,2009CB118404)+2 种基金the National 863 Program of China(2006AA100104)the 111 Project from Ministry of Education of China(B08025)the Youth Science and Technology Innovation Foundation of Nanjing Agriculture University,China(KJ2010002)
文摘Soybean mosaic virus （SMV）, a member of the genus Potyvirus, is a major pathogen of soybean plants in China, and 16 SMV strains have been identified nationwide based on a former detailed SMV classification system. As the P3 gene is thought to be involved in viral replication, systemic infection, pathogenicity, and overcoming resistance, knowledge of the P3 gene sequences of SMV and other potyviruses would be useful in efforts to know the genetic relationships among them and control the disease. P3 gene sequences were obtained from representative isolates of the above-mentioned 16 SMV strains and were compared with other SMV strains and 16 Potyvirus species from the National Center for Biotechnology GenBank database. The P3 genes from the 16 SMV isolates are composed of 1041 nucleotides, encoding 347 amino acids, and share 90.7-100% nucleotide （NT） sequence identities and 95.1-100% amino acid （AA） sequence identities. The P3 coding regions of the 16 SMV isolates share high identities （92.4-98.9% NT and 96.0-100% AA） with the reported Korean isolates, followed by the USA isolates （88.5-97.9% NT and 91.4-98.6% AA）, and share low identities （80.5-85.2% NT and 82.1-84.7% AA） with the reported HZ 1 and P isolates from Pinellia ternata. The sequence identities of the P3 genes between SMV and the 16 potyviruses varied from 44.4 to 81.9% in the NT sequences and from 21.4 to 85.3% in the AA sequences, respectively. Among them, SMV was closely related to Watermelon mosaic virus （WMV）, with 76.0-81.9% NT and 77.5-85.3% AA identities. In addition, the SMV isolates and potyvirus species were clustered into six distinct groups. All the SMV strains isolated from soybean were clustered in Group I, and the remaining species were clustered in other groups. A multiple sequence alignment analysis of the C-terminal regions indicated that the P3 genes within a species were highly conserved, whereas those among species were relatively variable.
基金Project(2003034470) supported by the Postdoctoral Science Foundation of China project supported by the Postdoctoral Science Foundation of Central South University
文摘Forecasting subtle traps by sequence stratigraphy and 3D seismic data is a sensitive topic in hydrocarbon exploration. Research on subtle traps by geophysical data is the most popular and difficult. Based on the sufficiently drilling data, log data, core data and 3D seismic data, sediment sequence of Qikou depression, Huanghua basin was partitioned by using sequence stratigraphy theory. Each sediment sequence system mode was built. Sediment faces of subtle traps were pointed out. Dominating factors forming subtle traps were analyzed. Sandstone seismic rock physics and its response were studied in Tertiary System. Sandstone geophysical response and elastic modulus vary laws with pressure, temperature, porosity, depth were built. Experimental result and practice shows that it is possible using seismic information forecasting subtle traps. Integrated using geology, log, drilling data, special seismic processing technique, interpretation technique, high precision horizon calibration technique, 3D seismic visualizing interpretation, seismic coherence analysis, attribute analysis, logging-constrained inversion, time frequency analysis, subtle trapsobject is identified and interpreted. Finally, advantage object of subtle trap in this area was determined. Bottomland sand stratigraphic and lithologic reservoirs in Qinan slope zone have been founded by means of high resolution 3D seismic data field technique, high resolution 3D seismic data processing technique and seismic wave impendence inversion technique.
基金supported by the National Natural Science Foundation of China(Nos.52225004 and 22276182)the National Key R&D Program of China(Nos.2022YFC3701804 and 2022YFC3704400)the Science and Technology Innovation“2025”major program in Ningbo(No.2020Z103)。
文摘Hydrothermal stability is crucial for the practical application of deNO_(x)catalyst on diesel vehicles,for the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR).SnO_(2)-based materials possess superior hydrothermal stability,which is attractive for the development of NH_(3)-SCR catalyst.In this work,a series of Ce-Nb/SnO_(2)catalysts,with Ce and Nb loading on SnO_(2)support,were prepared by impregnation method.It was found that,the NH_(3)-SCR activities and hydrothermal stabilities of the Ce-Nb/SnO_(2)catalysts significantly varied with the impregnation sequences,and the Ce-Nb(f)/SnO_(2) catalyst that firstly impregnated Nb and then impregnated Ce exhibited the best performance.The characterization results revealed that CeNb(f)/SnO_(2)possessed appropriate acidity and redox capability.Furthermore,the strong synergistic effect between Nb and Sn species stabilized the structure and maintained the dispersion of acid sites.This study may provide a new understanding for the effect of impregnation sequence on activity and hydrothermal stability and a new environmental-friendly NH_(3)-SCR catalyst with potential applications for NO_(x)removal from diesel and hydrogenfueled engines.
基金key project carried out in 2008-2011financially supported by the National Major Special Science and Technology Project (Grant No. 2008ZX05004-001)Major Special Issue of the China National Petroleum Corporation (Grant No. 2008E-0702)
文摘Type division and controlling factor analysis of 3rd-order sequence are of practical significance to tec-tonic analysis, sedimentary environment identification, and other geological researches. Based on the comprehensive analysis of carbon and oxygen isotope trends, paleobathymetry and spectral-frequency of representative well logs, 3rd-order sequences can be divided into 3 types： （a） global sea level （GSL） sequence mainly controlled by GSL change;（b） tectonic sequence mainly controlled by regional tectonic activity;and （c） composite sequence jointly controlled by GSL change and regional tectonic activity. This study aims to identify the controlling factors of 3rd-order sequences and to illustrate a new method for classification of 3rd-order sequences of the middle Permian strata in the Sichuan Basin, China. The middle Permian strata in the Sichuan Basin consist of 3 basin-contrastive 3rd-order sequences, i.e., PSQ1, PSQ2 and PSQ3. Of these, PSQ1 is a GSL sequence while PSQ2 and PSQ3 are composite sequences. The results suggest that the depositional environment was stable during the deposition of PSQ1, but was activated by tectonic activity during the deposition of the middle Permian Maokou Formation.
基金supported by Qingdao Key Medical and Health Discipline ProjectThe Intramural Research Program of the Affiliated Hospital of Qingdao University,No. 4910Qingdao West Coast New Area Science and Technology Project,No. 2020-55 (all to SW)。
文摘Border-associated macrophages are located at the interface between the brain and the periphery, including the perivascular spaces, choroid plexus, and meninges. Until recently, the functions of border-associated macrophages have been poorly understood and largely overlooked. However, a recent study reported that border-associated macrophages participate in stroke-induced inflammation, although many details and the underlying mechanisms remain unclear. In this study, we performed a comprehensive single-cell analysis of mouse border-associated macrophages using sequencing data obtained from the Gene Expression Omnibus(GEO) database(GSE174574 and GSE225948). Differentially expressed genes were identified, and enrichment analysis was performed to identify the transcription profile of border-associated macrophages. CellChat analysis was conducted to determine the cell communication network of border-associated macrophages. Transcription factors were predicted using the ‘pySCENIC' tool. We found that, in response to hypoxia, borderassociated macrophages underwent dynamic transcriptional changes and participated in the regulation of inflammatory-related pathways. Notably, the tumor necrosis factor pathway was activated by border-associated macrophages following ischemic stroke. The pySCENIC analysis indicated that the activity of signal transducer and activator of transcription 3(Stat3) was obviously upregulated in stroke, suggesting that Stat3 inhibition may be a promising strategy for treating border-associated macrophages-induced neuroinflammation. Finally, we constructed an animal model to investigate the effects of border-associated macrophages depletion following a stroke. Treatment with liposomes containing clodronate significantly reduced infarct volume in the animals and improved neurological scores compared with untreated animals. Taken together, our results demonstrate comprehensive changes in border-associated macrophages following a stroke, providing a theoretical basis for targeting border-associated macrophages-induced neuroinflammation in stroke treatment.
基金the National Natural Science Foundation of China(30200206) Zhejiang Provincial Natural Science Foundation of China(302113).
文摘By screening the worker （Apis cerana cerana） heads cDNA library using a fragment of the mrjp3 gene of Apis cerana as probe, 120 positive clones were obtained. The clone containing A. cerana cerana MRJP3 （AccMRJP3） cDNA was selected. Based on the sequencing of the inserts of the positive clone, a sequence of AccMRJP3 cDNA which is 1 887 bp long including a poly （A） tail was obtained. The AccMRJP3 cDNA encompassed an open-reading frame （ORF） with 1 779 bp encoding 593 amino acids. The un-translated regions （UTR） of the 5′ end and 3′end are 46 bp and 160 bp in length, respectively. Similar to AmMRJP3 and AdMRJP3, the putative AccMRJP3 also has a repetitive region. The comparison of the repetitive region of AccMRJP3, AmMRJP3 and AdMRJP3 shows some differences between them.
基金The study was financially supported by Projects from Shaanxi Province(2021LLRH-07-03-01 and 2023-ZDLNY-07)Yangling Seed Industry Innovation(YLzy-yc2021-01).The funders had no role in study design,data collection and analysis,decision to publish,or preparation of the manuscript.
文摘Genetic manipulation(either restraint or enhancement)of the biosynthesis pathway ofα-linolenic acid(ALA)in seed oil is an important goal in Brassica napus breeding.B.napus is a tetraploid plant whose genome often har-bors four and six homologous copies,respectively,of the two fatty acid desaturases FAD2 and FAD3,which con-trol the last two steps of ALA biosynthesis during seed oil accumulation.In this study,we compared their promoters,coding sequences,and expression levels in three high-ALA inbred lines 2006L,R8Q10,and YH25005,a low-ALA line A28,a low-ALA/high-oleic-acid accession SW,and the wildtype ZS11.The expression levels of most FAD2 and FAD3 homologs in the three high-ALA accessions were higher than those in ZS11 and much higher than those in A28 and SW.The three high-ALA accessions shared similar sequences with the pro-moters and CDSs of BnFAD3.C4 and BnFAD3.A3.In A28 and SW,substitution of three amino acid residues in BnFAD2.A5 and BnFAD2.C5,an absence of BnFAD2.C1 locus,and a 549 bp long deletion on the BnFAD3.A3 promoter were detected.The profile of BnFAD2 mutation in the two low-ALA accessions A28 and SW is different from that reported in previous studies.The mutations in BnFAD3 in the high-ALA accessions are reported for thefirst time.In identifying the sites of these mutations,we provide detailed information to aid the design of mole-cular markers for accelerated breeding schemes.
文摘The parental material of soils in the Qilian Mountains of northwest China is mainly aeolian loess containing CaCO3 which may remain in soils under the semiarid-arid climate. To disclose the CaCO3 characteristics change with the altitude and the terrain attributes, we surveyed 18 soil profiles in an altitude sequence from 3076 m to 4510 m in the Hulugou Watershed in the Qilian Mountains, measured CaCO3 contents of all genetic horizon samples, analyzed the densities, illuviation modes and depths of CaCO3 in the profiles, extracted values of the terrain attributes of the profiles including altitude slope, aspect, plane curvature, profile curvature and terrain wetness index (TWI) from the 90 m resolution SRTM3 DEM data on ArcGIS 9.3 platform. We found that CaCO3 weighted content of the profiles ranged from 1.30 g·kg-1 to 93.09 g·kg-1, CaCO3 density from 0.05 kg/m2 to 75.69 kg/m2, CaCO3 illuviation depth from 12 cm to 54 cm. CaCO3 illuviation modes could be divided into three types, i.e., no illuviation mode in which the profile has only A horizon or CaCO3 content -1, middle illuviation mode in which CaCO3 accumulated in a middle horizon, and down illuviation mode in which CaCO3 content increases with the depth. CaCO3 weighted content, density and illuviation depth had significant correlation with certain terrain attributes. In general, the altitude sequence is an effective way to study CaCO3 characteristics in the alpine region, and the data of terrain attributes which can influence the precipitation and its redistribution in soil are potential in predicting soil CaCO3 characteristics in the alpine region.
基金funded by the Open-end Foundation of State Key Laboratory of Earthquake Dynamics(LED2014B01)Project of Earthquake Science Foundation of Xinjiang,China(20120201)
文摘The basic parameters,seismogenic structure and seismic sequences characteristics of the Yutian MS7. 3 earthquake on February 12,2014 are introduced and compared to the Yutian MS7. 3 earthquake in 2008. The results show that the MS5. 4 earthquake is regarded as an immediate foreshock of the Yutian MS7. 3 main shock. The frequency of strong aftershock sequences was low and their number declined quickly,and the maximum aftershock was a MS5. 7 earthquake. According to analysis of the historical earthquake sequence type,and parameter of h-value,b-value and energy release ratio between main shock and sequence etc.,we found the preliminary conclusion that the Yutian MS7. 3 earthquake sequence in 2014 was a foreshock-main shock-aftershock type.
文摘The phase change of lacustrine gravity flow deposition is fast and complex. In its reservoir division and correlation, the isochronous problem is very important. Taking the oil formation I of Es3 in Wuhaozhuang oilfield as an example, through the analysis of stratigraphic drilling and logging data in the study area, according to the genetic types of different levels of base level cycle interfaces and the characteristics of high-resolution sequence stratigraphy, this paper subdivides the lacustrine gravity flow oil layer of lower Es3 in Wuhaozhuang Oilfield, divides it into four short-term base level cycle sequences, and establishes the high-resolution isochronous stratigraphic framework of this interval. It is found that the mid-term, short-term and ultra short-term base level cycles correspond to the oil formation, sand layer group and single layer in the oil layer correlation unit of the oilfield respectively. Based on this, the oil layer correlation unit of the interval is divided, and the sublayer correlation model is established according to the identification characteristics of the short-term base level cycle.
基金funded by the project of "Intensive Monitoring and Tracking Studies in the Key Seismic Risk Regions of China in 2011 " of China Earthquake Administration( 2011016301)the‘Comprehensive study of Delingha and Da Qaidam Strong Earthquake Swarms ( 2009A01)of the Earthquake Science Foundation of Qinghai Province,China
文摘In this paper,the seismogenic structures of the Da Qaidam strong earthquakes are preliminarily discussed by using the regional seismotectonic data and focal mechanism solutions. Analysis is done on the temporal and spatial distribution characteristics of the two strong earthquake sequences in Da Qaidam in combination with the sequence distribution characteristics of the M6. 6 earthquake of 2003 and the five strong earthquakes of about M5. 0 in 2004 in Delingha. At the same time,the regional characteristics of the historical seismic activity are also investigated. Preliminary analysis is done on the influence of the two M8. 0 earthquakes in the past 10 years on this region. Precursory anomalies and their characteristics are discussed in combination with the analysis of the precursor observation data of Qinghai Province.
