Despite extensive research on computational geomechanics and fluid dynamics,accurately simulating convection-diffusion(CD)processes in complex fractured systems remains a significant challenge.This study develops a 3D...Despite extensive research on computational geomechanics and fluid dynamics,accurately simulating convection-diffusion(CD)processes in complex fractured systems remains a significant challenge.This study develops a 3D numerical framework for modelling CD processes in fractured geological media.The framework integrates Darcy's law and Fick's law,considering flux interactions between the matrix and fractures.The meshing strategy generates high-quality grids even in scenarios involving intersecting fractures.Then,a unified numerical scheme for solving the CD system is proposed.The novelties of this work include:(1)The proposed framework enables effective simulation of 3D fractured media,including more complex fractured vuggy media;(2)The numerical method precisely discretizes the CD terms in governing equations;(3)A Non-Orthogonal Correction(NOC)method,combined with an adaptive time integration scheme,is proposed for eliminating errors induced by skewed grids;and(4)The effects of fracture patterns and heterogeneity on flow are thoroughly analysed.The proposed method is validated through benchmark tests,demonstrating the superiority of the NOC method compared to classical methods.Further analysis reveals the evolution characteristics of pressure and concentration,offering insights into the effects of fracture patterns and heterogeneity on flow and diffusion processes.展开更多
The bottom-simulating reflector（BSR） is a seismic indicator of the bottom of a gas hydrate stability zone. Its depth can be used to calculate the seafloor surface heat flow. The calculated BSR heat flow variations i...The bottom-simulating reflector（BSR） is a seismic indicator of the bottom of a gas hydrate stability zone. Its depth can be used to calculate the seafloor surface heat flow. The calculated BSR heat flow variations include disturbances from two important factors：（1） seafloor topography, which focuses the heat flow over regions of concave topography and defocuses it over regions of convex topography, and（2） the focused warm fluid flow within the accretionary prism coming from depths deeper than BSR. The focused fluid flow can be detected if the contribution of the topography to the BSR heat flow is removed. However, the analytical equation cannot solve the topographic effect at complex seafloor regions. We prove that 3D finite element method can model the topographic effect on the regional background heat flow with high accuracy, which can then be used to correct the topographic effect and obtain the BSR heat flow under the condition of perfectly flat topography. By comparing the corrected BSR heat flow with the regional background heat flow, focused fluid flow regions can be detected that are originally too small and cannot be detected using present-day equipment. This method was successfully applied to the midslope region of northern Cascadia subducting margin. The results suggest that the Cucumber Ridge and its neighboring area are positive heat flow anomalies, about 10%–20% higher than the background heat flow after 3D topographic correction. Moreover, the seismic imaging associated the positive heat flow anomaly areas with seabed fracture–cavity systems. This suggests flow of warm gas-carrying fluids along these high-permeability pathways, which could result in higher gas hydrate concentrations.展开更多
Based on the design of the multi-row sprocket with a new tooth profile,a cold semi-precision forging process for manufacturing 5052 aluminum alloy multi-row sprocket was presented.Through simulating the forging proces...Based on the design of the multi-row sprocket with a new tooth profile,a cold semi-precision forging process for manufacturing 5052 aluminum alloy multi-row sprocket was presented.Through simulating the forging process of 5052 aluminum alloy sprocket billet with 3D rigid-viscoplastic FEM,both the distributions of flow velocity field in axial(U_Z),radial(U_R) and circumferential(U_θ) directions and the curves of velocity component in different deformation regions were respectively obtained.By comparison and analysis of the velocity varying curves,the velocity component relation conditions for filling the die cavity were clarified.It shows that when the die cavity is almost fully filled,the circumferential velocity U_θ increases sharply,implying that U_θplays a key role in fully filling the die cavity.展开更多
The standard three dimensional（3D） k-ε turbulence model was applied to simulate the flow field of a small scale combined oxidation ditch. The moving mesh approach was used to model the rotor of the ditch. Compariso...The standard three dimensional（3D） k-ε turbulence model was applied to simulate the flow field of a small scale combined oxidation ditch. The moving mesh approach was used to model the rotor of the ditch. Comparison of the computed and the measured data is acceptable. A vertical reverse flow zone in the ditch was found, and it played a very important role in the ditch flow behavior. The flow pattern in the ditch is discussed in detail, and approaches are suggested to improve the hydrodynamic performance in the ditch.展开更多
In this paper,carbon microsphere prepared by hydrothermal treatment was activated by KHCO_3 at high temperature,and employed as the catalyst for VO^(2+)/VO_2^+redox reaction for vanadium redox flow battery(VRFB).Carbo...In this paper,carbon microsphere prepared by hydrothermal treatment was activated by KHCO_3 at high temperature,and employed as the catalyst for VO^(2+)/VO_2^+redox reaction for vanadium redox flow battery(VRFB).Carbon microsphere can be etched by KHCO_3 due to the reaction between the pyrolysis products of KHCO_3 and carbon atoms.Moreover,KHCO_3 activation can bring many oxygen functional groups on carbon microsphere,further improving the wettability of catalyst and increasing the active sites.The electrocatalytic properties of carbon microsphere from hydrothermal treatment are improved by high temperature carbonization,and can further be enhanced by KHCO_3 activation.Among carbon microsphere samples,the VO^(2+)/VO_2^+redox reaction exhibits the highest electrochemical kinetics on KHCO_3 activated sample.The cell using KHCO_3 activated carbon microsphere as the positive catalyst demonstrates higher energy efficiency and larger discharge capacity,especially at high current density.The results reveal that KHCO_3 activated carbon microsphere is an efficient,low-cost carbon-based catalyst for VO^(2+)/VO_2^+redox reaction for VRFB system.展开更多
Hot compression experiments were conducted on Ti 15 3 alloy specimens using Gleeble 1500 Thermal Simulator.These tests were focused to obtain the flow stress data under various conditions of strain,strain rate and tem...Hot compression experiments were conducted on Ti 15 3 alloy specimens using Gleeble 1500 Thermal Simulator.These tests were focused to obtain the flow stress data under various conditions of strain,strain rate and temperature. On the basis of these data, the predicting model for the nonlinear relation between flow stress and deformation strain,strain rate and temperature for Ti 15 3 alloy was developed with a back propagation artificial neural network method. Results show that the neural network can reproduce the flow stress in the sampled data and predict the nonsampled data well. Thus the neural network method has been verified to be used to tackle hot deformation problems of Ti 15 3 alloy. [展开更多
The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount...The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount on degradation of formaldehyde gas were investigated. The experimental results indicated that the combination of ozonation with photocatalytic oxidation on the degradation of formaldehyde showed a synergetic action, e.g,, it could considerably increase decomposing of formaldehyde. The degradation efficiency of formaldehyde was between 73.6% and 79.4% while the initial concentration in the range of 1.84--24 mg/m^3 by O3/TiO2flJV process. The optimal humidity was about 50% in UV/TiO2/O3 processs and degradation of formaldehyde increases from 39.0% to 94.1% when the ozone content increased from 0 to 141 mg/m^3. Furthermore, the kinetics of formaldehyde degradation reaction could be described by Langmuir-Hinshelwood model. The rate constant k of 46.72 mg/（m^3.min） and Langmuir adsorption coefficient K of 0.0268 m^3/mg were obtained.展开更多
Nonlinear flow behavior of fluids through three-dimensional(3D)discrete fracture networks(DFNs)considering effects of fracture number,surface roughness and fracture aperture was experimentally and numerically investig...Nonlinear flow behavior of fluids through three-dimensional(3D)discrete fracture networks(DFNs)considering effects of fracture number,surface roughness and fracture aperture was experimentally and numerically investigated.Three physical models of DFNs were 3D-printed and then computed tomography(CT)-scanned to obtain the specific geometry of fractures.The validity of numerically simulating the fluid flow through DFNs was verified via comparison with flow tests on the 3D-printed models.A parametric study was then implemented to establish quantitative relations between the coefficients/parameters in Forchheimer’s law and geometrical parameters.The results showed that the 3D-printing technique can well reproduce the geometry of single fractures with less precision when preparing complex fracture networks,numerical modeling precision of which can be improved via CT-scanning as evidenced by the well fitted results between fluid flow tests and numerical simulations using CT-scanned digital models.Streamlines in DFNs become increasingly tortuous as the fracture number and roughness increase,resulting in stronger inertial effects and greater curvatures of hydraulic pressure-low rate relations,which can be well characterized by the Forchheimer’s law.The critical hydraulic gradient for the onset of nonlinear flow decreases with the increasing aperture,fracture number and roughness,following a power function.The increases in fracture aperture and number provide more paths for fluid flow,increasing both the viscous and inertial permeabilities.The value of the inertial permeability is approximately four orders of magnitude greater than the viscous permeability,following a power function with an exponent a of 3,and a proportional coefficient b mathematically correlated with the geometrical parameters.展开更多
Vat photopolymerization 3D printing ceramic technology provides a feasible process for the preparation of complex internal cooling channels for aeroengine single crystal superalloy hollow blades.However,the typical la...Vat photopolymerization 3D printing ceramic technology provides a feasible process for the preparation of complex internal cooling channels for aeroengine single crystal superalloy hollow blades.However,the typical layered structure characteristics of 3D printing ceramic technology led to the anisotropy of ceramic core strength and sintering shrinkage,which greatly affects the performance and accuracy of the complex structure core and requires further research and improvement.Herein,the influence of the thickness of the slurry layer on the flow characteristics of the slurry in the process of the vat photopolymerization 3D printing slurry spreading was systematically studied by the method of simulation and experiment.The simulation results show that the positions of the turbulent zone and maximum velocity zone in the scraper front affect the redistribution of powder particles with different sizes.The layered structure was caused by the redistribution of ceramic particles of different sizes in the slurry layer.By controlling the turbulent flow zone and the maximum velocity zone of the scraper leading edge,the phenomenon of laminar flow can be weakened and the particle redistribution can be improved.With the increase of the thickness of the printing layer,the layered structure appears gradually,and the pores at the interface of the layered structure gradually concentrated into the interfacial pore lines from the uniform distribution,and the crack propagation changes from intergranular micro-crack to interlayer macro-crack.The combination of finite element simulation and experiment,through the slurry flow characteristics to control the layered structure of reductive vat photopolymerization ceramic core 3D printing,the control of crack propagation mode,element distribution and pore evolution of the core was accomplished,which lays a foundation for the performance control of ceramic 3D printing technology.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51991392 and 42293355).
文摘Despite extensive research on computational geomechanics and fluid dynamics,accurately simulating convection-diffusion(CD)processes in complex fractured systems remains a significant challenge.This study develops a 3D numerical framework for modelling CD processes in fractured geological media.The framework integrates Darcy's law and Fick's law,considering flux interactions between the matrix and fractures.The meshing strategy generates high-quality grids even in scenarios involving intersecting fractures.Then,a unified numerical scheme for solving the CD system is proposed.The novelties of this work include:(1)The proposed framework enables effective simulation of 3D fractured media,including more complex fractured vuggy media;(2)The numerical method precisely discretizes the CD terms in governing equations;(3)A Non-Orthogonal Correction(NOC)method,combined with an adaptive time integration scheme,is proposed for eliminating errors induced by skewed grids;and(4)The effects of fracture patterns and heterogeneity on flow are thoroughly analysed.The proposed method is validated through benchmark tests,demonstrating the superiority of the NOC method compared to classical methods.Further analysis reveals the evolution characteristics of pressure and concentration,offering insights into the effects of fracture patterns and heterogeneity on flow and diffusion processes.
基金sponsored by the National Natural Science Foundation of China(Grant Nos.40904029 and 41274185)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry
文摘The bottom-simulating reflector（BSR） is a seismic indicator of the bottom of a gas hydrate stability zone. Its depth can be used to calculate the seafloor surface heat flow. The calculated BSR heat flow variations include disturbances from two important factors：（1） seafloor topography, which focuses the heat flow over regions of concave topography and defocuses it over regions of convex topography, and（2） the focused warm fluid flow within the accretionary prism coming from depths deeper than BSR. The focused fluid flow can be detected if the contribution of the topography to the BSR heat flow is removed. However, the analytical equation cannot solve the topographic effect at complex seafloor regions. We prove that 3D finite element method can model the topographic effect on the regional background heat flow with high accuracy, which can then be used to correct the topographic effect and obtain the BSR heat flow under the condition of perfectly flat topography. By comparing the corrected BSR heat flow with the regional background heat flow, focused fluid flow regions can be detected that are originally too small and cannot be detected using present-day equipment. This method was successfully applied to the midslope region of northern Cascadia subducting margin. The results suggest that the Cucumber Ridge and its neighboring area are positive heat flow anomalies, about 10%–20% higher than the background heat flow after 3D topographic correction. Moreover, the seismic imaging associated the positive heat flow anomaly areas with seabed fracture–cavity systems. This suggests flow of warm gas-carrying fluids along these high-permeability pathways, which could result in higher gas hydrate concentrations.
基金Projects(51175363,51274149)supported by the National Natural Science Foundation of China
文摘Based on the design of the multi-row sprocket with a new tooth profile,a cold semi-precision forging process for manufacturing 5052 aluminum alloy multi-row sprocket was presented.Through simulating the forging process of 5052 aluminum alloy sprocket billet with 3D rigid-viscoplastic FEM,both the distributions of flow velocity field in axial(U_Z),radial(U_R) and circumferential(U_θ) directions and the curves of velocity component in different deformation regions were respectively obtained.By comparison and analysis of the velocity varying curves,the velocity component relation conditions for filling the die cavity were clarified.It shows that when the die cavity is almost fully filled,the circumferential velocity U_θ increases sharply,implying that U_θplays a key role in fully filling the die cavity.
基金The Specialized Research Fund for the Doctoral Programof Higher Education(No.20010610023) and the Sino-Finnish Scientific and TechnologicalCooperation Program
文摘The standard three dimensional（3D） k-ε turbulence model was applied to simulate the flow field of a small scale combined oxidation ditch. The moving mesh approach was used to model the rotor of the ditch. Comparison of the computed and the measured data is acceptable. A vertical reverse flow zone in the ditch was found, and it played a very important role in the ditch flow behavior. The flow pattern in the ditch is discussed in detail, and approaches are suggested to improve the hydrodynamic performance in the ditch.
基金financially supported by National Natural Science Foundation of China (No.51504079)Hebei Natural Science Fund for Distinguished Young Scholar (No.E2017209079)+2 种基金Hebei Provincial Training Program of Innovation and Entrepreneurship for Undergraduates (No.X2016040)Open Project Program of State Key Laboratory Breeding Base of Nuclear Resources and Environment (No.NRE1503)Tangshan Scientific and Technical Innovation Team Project of China (No.15130201C)
文摘In this paper,carbon microsphere prepared by hydrothermal treatment was activated by KHCO_3 at high temperature,and employed as the catalyst for VO^(2+)/VO_2^+redox reaction for vanadium redox flow battery(VRFB).Carbon microsphere can be etched by KHCO_3 due to the reaction between the pyrolysis products of KHCO_3 and carbon atoms.Moreover,KHCO_3 activation can bring many oxygen functional groups on carbon microsphere,further improving the wettability of catalyst and increasing the active sites.The electrocatalytic properties of carbon microsphere from hydrothermal treatment are improved by high temperature carbonization,and can further be enhanced by KHCO_3 activation.Among carbon microsphere samples,the VO^(2+)/VO_2^+redox reaction exhibits the highest electrochemical kinetics on KHCO_3 activated sample.The cell using KHCO_3 activated carbon microsphere as the positive catalyst demonstrates higher energy efficiency and larger discharge capacity,especially at high current density.The results reveal that KHCO_3 activated carbon microsphere is an efficient,low-cost carbon-based catalyst for VO^(2+)/VO_2^+redox reaction for VRFB system.
文摘Hot compression experiments were conducted on Ti 15 3 alloy specimens using Gleeble 1500 Thermal Simulator.These tests were focused to obtain the flow stress data under various conditions of strain,strain rate and temperature. On the basis of these data, the predicting model for the nonlinear relation between flow stress and deformation strain,strain rate and temperature for Ti 15 3 alloy was developed with a back propagation artificial neural network method. Results show that the neural network can reproduce the flow stress in the sampled data and predict the nonsampled data well. Thus the neural network method has been verified to be used to tackle hot deformation problems of Ti 15 3 alloy. [
基金Project supported by the Science Project of Harbin City(No. H2001-12)the Youth Foundation of School of Municipal and Environmental Engineering in Harbin Institute of Technology(No. 01306914).
文摘The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount on degradation of formaldehyde gas were investigated. The experimental results indicated that the combination of ozonation with photocatalytic oxidation on the degradation of formaldehyde showed a synergetic action, e.g,, it could considerably increase decomposing of formaldehyde. The degradation efficiency of formaldehyde was between 73.6% and 79.4% while the initial concentration in the range of 1.84--24 mg/m^3 by O3/TiO2flJV process. The optimal humidity was about 50% in UV/TiO2/O3 processs and degradation of formaldehyde increases from 39.0% to 94.1% when the ozone content increased from 0 to 141 mg/m^3. Furthermore, the kinetics of formaldehyde degradation reaction could be described by Langmuir-Hinshelwood model. The rate constant k of 46.72 mg/（m^3.min） and Langmuir adsorption coefficient K of 0.0268 m^3/mg were obtained.
基金the Natural Science Foundation of Zhejiang Province(Grant No.LR19E090001)the Natural Science Foundation of China(Grant Nos.42077252,42011530122,and 51979272).
文摘Nonlinear flow behavior of fluids through three-dimensional(3D)discrete fracture networks(DFNs)considering effects of fracture number,surface roughness and fracture aperture was experimentally and numerically investigated.Three physical models of DFNs were 3D-printed and then computed tomography(CT)-scanned to obtain the specific geometry of fractures.The validity of numerically simulating the fluid flow through DFNs was verified via comparison with flow tests on the 3D-printed models.A parametric study was then implemented to establish quantitative relations between the coefficients/parameters in Forchheimer’s law and geometrical parameters.The results showed that the 3D-printing technique can well reproduce the geometry of single fractures with less precision when preparing complex fracture networks,numerical modeling precision of which can be improved via CT-scanning as evidenced by the well fitted results between fluid flow tests and numerical simulations using CT-scanned digital models.Streamlines in DFNs become increasingly tortuous as the fracture number and roughness increase,resulting in stronger inertial effects and greater curvatures of hydraulic pressure-low rate relations,which can be well characterized by the Forchheimer’s law.The critical hydraulic gradient for the onset of nonlinear flow decreases with the increasing aperture,fracture number and roughness,following a power function.The increases in fracture aperture and number provide more paths for fluid flow,increasing both the viscous and inertial permeabilities.The value of the inertial permeability is approximately four orders of magnitude greater than the viscous permeability,following a power function with an exponent a of 3,and a proportional coefficient b mathematically correlated with the geometrical parameters.
基金financially supported by the Natural Science Foundation of China(No.U22A20129)the National Science and Technology Major Project(No.2017-VI-0002-0072)+2 种基金the National Key Research and Development Program of China(No.2018YFB1106600)the Fundamental Research Funds for the Central Universities(WK5290000003)the Students’Innovation and Entrepreneurship Foundation of USTC(Nos.CY2022G10 and CY2022C24).
文摘Vat photopolymerization 3D printing ceramic technology provides a feasible process for the preparation of complex internal cooling channels for aeroengine single crystal superalloy hollow blades.However,the typical layered structure characteristics of 3D printing ceramic technology led to the anisotropy of ceramic core strength and sintering shrinkage,which greatly affects the performance and accuracy of the complex structure core and requires further research and improvement.Herein,the influence of the thickness of the slurry layer on the flow characteristics of the slurry in the process of the vat photopolymerization 3D printing slurry spreading was systematically studied by the method of simulation and experiment.The simulation results show that the positions of the turbulent zone and maximum velocity zone in the scraper front affect the redistribution of powder particles with different sizes.The layered structure was caused by the redistribution of ceramic particles of different sizes in the slurry layer.By controlling the turbulent flow zone and the maximum velocity zone of the scraper leading edge,the phenomenon of laminar flow can be weakened and the particle redistribution can be improved.With the increase of the thickness of the printing layer,the layered structure appears gradually,and the pores at the interface of the layered structure gradually concentrated into the interfacial pore lines from the uniform distribution,and the crack propagation changes from intergranular micro-crack to interlayer macro-crack.The combination of finite element simulation and experiment,through the slurry flow characteristics to control the layered structure of reductive vat photopolymerization ceramic core 3D printing,the control of crack propagation mode,element distribution and pore evolution of the core was accomplished,which lays a foundation for the performance control of ceramic 3D printing technology.
