With the aim of reducing the cost of developing internal combustion engines,while at the same time investigating different geometries,layouts and fuels,3D-CFD-CHT simulations represent an indispensable part for the de...With the aim of reducing the cost of developing internal combustion engines,while at the same time investigating different geometries,layouts and fuels,3D-CFD-CHT simulations represent an indispensable part for the development of new technologies.These tools are increasingly used by manufacturers,as a screening process before building the first prototype.This paper presents an innovative methodology for virtual engine development.The 3D-CFD tool QuickSim,developed at FKFS,allows both a significant reduction in computation time and an extension of the simulated domain for complete engine systems.This is possible thanks to a combination of coarse meshes and self-developed internal combustion engine models,which simultaneously ensure high predictability.The present work demonstrates the capabilities of this innovative methodology for the design and optimization of different engines and fuels with the goal of achieving the highest possible combustion efficiencies and pollutant reductions.The analysis focuses on the influence of different fuels such as hydrogen,methanol,synthetic gasolines and methane on different engine geometries,in combination with suitable injection and ignition systems,including passive and active pre-chambers.Lean operations as well as knock reduction are discussed,particularly for methane and hydrogen injection.Finally,it is shown how depending on the chosen fuel,an appropriate ad-hoc engine layout can be designed to increase the indicated efficiency of the respective engines.展开更多
Three-dimensional numerical model, which employed porosity factors to simulate the effects of obstacles in the fluid domain, was developed. Computer code-FASTOR-3D, based on SIMPLE algorithm and staggered grid scheme,...Three-dimensional numerical model, which employed porosity factors to simulate the effects of obstacles in the fluid domain, was developed. Computer code-FASTOR-3D, based on SIMPLE algorithm and staggered grid scheme, was initiated and verified with several benchmark solutions. Application of this code on heat transfer and flows in sodium pool of a fast breeder reactor, turned out meaningful database. The vast numerical result is visualized with affiliated software DV which converts flow and temperature fields into vivid colors for convenient analysis.展开更多
The main purpose of this paper is to analyze the influence of different turbulence flow models on scouring pit of bridge-pier. Flow-3D software is applied in line with the purpose. The key motivation for this study is...The main purpose of this paper is to analyze the influence of different turbulence flow models on scouring pit of bridge-pier. Flow-3D software is applied in line with the purpose. The key motivation for this study is to contribute to the Flow-3D software by means of some modification and adjustment in the sediment scour model and shallow water model. An assessment of turbulence model adopted with the parameters of the Melville experiment to estimate the maximum scour-depth was performed. In the simulation results, the alternate eddy formation and shedding were repeated while the Karman vortex street formed behind the pier for the large eddy simulation LES turbulence model is more realistic in the flow phenomenon. The results of the scour development of large eddy simulation (LES) turbulence model were found to be more satisfied than the Renormalized group (RNG) turbulence model and close to the prior experiment results. The simulated scour results were significantly different with the observed data collected from previous literature in the reason of some unsuitability of meshing method in Flow-3D software.展开更多
文摘With the aim of reducing the cost of developing internal combustion engines,while at the same time investigating different geometries,layouts and fuels,3D-CFD-CHT simulations represent an indispensable part for the development of new technologies.These tools are increasingly used by manufacturers,as a screening process before building the first prototype.This paper presents an innovative methodology for virtual engine development.The 3D-CFD tool QuickSim,developed at FKFS,allows both a significant reduction in computation time and an extension of the simulated domain for complete engine systems.This is possible thanks to a combination of coarse meshes and self-developed internal combustion engine models,which simultaneously ensure high predictability.The present work demonstrates the capabilities of this innovative methodology for the design and optimization of different engines and fuels with the goal of achieving the highest possible combustion efficiencies and pollutant reductions.The analysis focuses on the influence of different fuels such as hydrogen,methanol,synthetic gasolines and methane on different engine geometries,in combination with suitable injection and ignition systems,including passive and active pre-chambers.Lean operations as well as knock reduction are discussed,particularly for methane and hydrogen injection.Finally,it is shown how depending on the chosen fuel,an appropriate ad-hoc engine layout can be designed to increase the indicated efficiency of the respective engines.
文摘Three-dimensional numerical model, which employed porosity factors to simulate the effects of obstacles in the fluid domain, was developed. Computer code-FASTOR-3D, based on SIMPLE algorithm and staggered grid scheme, was initiated and verified with several benchmark solutions. Application of this code on heat transfer and flows in sodium pool of a fast breeder reactor, turned out meaningful database. The vast numerical result is visualized with affiliated software DV which converts flow and temperature fields into vivid colors for convenient analysis.
文摘The main purpose of this paper is to analyze the influence of different turbulence flow models on scouring pit of bridge-pier. Flow-3D software is applied in line with the purpose. The key motivation for this study is to contribute to the Flow-3D software by means of some modification and adjustment in the sediment scour model and shallow water model. An assessment of turbulence model adopted with the parameters of the Melville experiment to estimate the maximum scour-depth was performed. In the simulation results, the alternate eddy formation and shedding were repeated while the Karman vortex street formed behind the pier for the large eddy simulation LES turbulence model is more realistic in the flow phenomenon. The results of the scour development of large eddy simulation (LES) turbulence model were found to be more satisfied than the Renormalized group (RNG) turbulence model and close to the prior experiment results. The simulated scour results were significantly different with the observed data collected from previous literature in the reason of some unsuitability of meshing method in Flow-3D software.
