In this paper, near-fault strong ground motions caused by a surface rupture fault （SRF） and a buried fault （BF） are numerically simulated and compared by using a time-space-decoupled, explicit finite element metho...In this paper, near-fault strong ground motions caused by a surface rupture fault （SRF） and a buried fault （BF） are numerically simulated and compared by using a time-space-decoupled, explicit finite element method combined with a multi-transmitting formula （MTF） of an artificial boundary. Prior to the comparison, verification of the explicit element method and the MTF is conducted. The comparison results show that the final dislocation of the SRF is larger than the BF for the same stress drop on the fault plane. The maximum final dislocation occurs on the fault upper line for the SRF; however, for the BE the maximum final dislocation is located on the fault central part. Meanwhile, the PGA, PGV and PGD of long period ground motions （≤ 1 Hz） generated by the SRF are much higher than those of the BF in the near-fault region. The peak value of the velocity pulse generated by the SRF is also higher than the BE Furthermore, it is found that in a very narrow region along the fault trace, ground motions caused by the SRF are much higher than by the BF. These results may explain why SRFs almost always cause heavy damage in near-fault regions compared to buried faults.展开更多
Objective To investigate the effect of computer aided 3D simulation technique for treating complicated foot and ankle fractures precisely.Methods From November 2007 to August 2009,255 patients with complicated foot an...Objective To investigate the effect of computer aided 3D simulation technique for treating complicated foot and ankle fractures precisely.Methods From November 2007 to August 2009,255 patients with complicated foot and ankle fractures展开更多
The numerical simulation of internal features,such as inclusions and voids,is important to analyze their impact on the performance of composite materials.However,the complex geometries of internal features and the ind...The numerical simulation of internal features,such as inclusions and voids,is important to analyze their impact on the performance of composite materials.However,the complex geometries of internal features and the induced continuous-discontinuous(C-D)deformation fields are challenges to their numerical simulation.In this study,a 3D approach using a simple mesh to simulate irregular internal geometries is developed for the first time.With the help of a developed voxel crack model,image models that are efficient when recording complex geometries are directly imported into the simulation.Surface reconstructions,which are usually labor-intensive,are excluded from this approach.Moreover,using image models as the geometric input,image processing techniques are applied to detect material interfaces and develop contact pairs.Then,the C-D deformations of the complex internal features are directly calculated based on the numerical manifold method.The accuracy and convergence of the developed3D approach are examined based on multiple benchmarks.Successful 3D C-D simulation of sandstones with naturally formed complex microfeatures demonstrates the capability of the developed approach.展开更多
Drilling and blasting,characterized by their efficiency,ubiquity,and cost-effectiveness,have emerged as predominant techniques in rock excavation;however,they are accompanied by enormous destructive power.Accurately c...Drilling and blasting,characterized by their efficiency,ubiquity,and cost-effectiveness,have emerged as predominant techniques in rock excavation;however,they are accompanied by enormous destructive power.Accurately controlling the blasting energy and achieving the directional fracture of a rock mass have become common problems in the field.A two-dimensional blasting(2D blasting)technique was proposed that utilizes the characteristic that the tensile strength of a rock mass is significantly lower than its compressive strength.After blasting,only a 2D crack surface is generated along the predetermined direction,eliminating the damage to the reserved rock mass caused by conventional blasting.However,the interior of a natural rock mass is a"black box",and the process of crack propagation is difficult to capture,resulting in an unclear 2D blasting mechanism.To this end,a single-hole polymethyl methacrylate(PMMA)test piece was used to conduct a 2D blasting experiment with the help of a high-speed camera to capture the dynamic crack propagation process and the digital image correlation(DIC)method to analyze the evolution law of surface strain on the test piece.On this basis,a three-dimensional(3D)finite element model was established based on the progressive failure theory to simulate the stress,strain,damage,and displacement evolution process of the model under 2D blasting.The simulation results were consistent with the experimental results.The research results reveal the 2D blasting mechanism and provide theoretical support for the application of 2D blasting technology in the field of rock excavation.展开更多
Vulnerability assessment is a systematic process to identify security gaps in the design and evaluation of physical protection systems.Adversarial path planning is a widely used method for identifying potential vulner...Vulnerability assessment is a systematic process to identify security gaps in the design and evaluation of physical protection systems.Adversarial path planning is a widely used method for identifying potential vulnerabilities and threats to the security and resilience of critical infrastructures.However,achieving efficient path optimization in complex large-scale three-dimensional(3D)scenes remains a significant challenge for vulnerability assessment.This paper introduces a novel A^(*)-algorithmic framework for 3D security modeling and vulnerability assessment.Within this framework,the 3D facility models were first developed in 3ds Max and then incorporated into Unity for A^(*)heuristic pathfinding.The A^(*)-heuristic pathfinding algorithm was implemented with a geometric probability model to refine the detection and distance fields and achieve a rational approximation of the cost to reach the goal.An admissible heuristic is ensured by incorporating the minimum probability of detection(P_(D)^(min))and diagonal distance to estimate the heuristic function.The 3D A^(*)heuristic search was demonstrated using a hypothetical laboratory facility,where a comparison was also carried out between the A^(*)and Dijkstra algorithms for optimal path identification.Comparative results indicate that the proposed A^(*)-heuristic algorithm effectively identifies the most vulnerable adversarial pathfinding with high efficiency.Finally,the paper discusses hidden phenomena and open issues in efficient 3D pathfinding for security applications.展开更多
The standard three dimensional（3D） k-ε turbulence model was applied to simulate the flow field of a small scale combined oxidation ditch. The moving mesh approach was used to model the rotor of the ditch. Compariso...The standard three dimensional（3D） k-ε turbulence model was applied to simulate the flow field of a small scale combined oxidation ditch. The moving mesh approach was used to model the rotor of the ditch. Comparison of the computed and the measured data is acceptable. A vertical reverse flow zone in the ditch was found, and it played a very important role in the ditch flow behavior. The flow pattern in the ditch is discussed in detail, and approaches are suggested to improve the hydrodynamic performance in the ditch.展开更多
With the development of aviation agricultural technology,the number of farmers adopting the use of drones in daily agricultural activities is growing rapidly in recent decades.Among these,a large portion constitutes a...With the development of aviation agricultural technology,the number of farmers adopting the use of drones in daily agricultural activities is growing rapidly in recent decades.Among these,a large portion constitutes agricultural drones being used in pest control and crop protection practices,e.g.agriculture spraying of pesticides.Spraying pesticides with drones have proven to be faster than other traditional methods.On the downside,flight time and range of Unmanned Aerial Vehicles(UAV)are often limited.Thus,a proper arrangement of flight height and velocity will greatly improve spraying efficiency.A new strategy to optimize the flight parameters,i.e.flight height and flight velocity,for fixed-wing UAV with a 3D simulation-based approach together with an automatic optimization algorithm was proposed in this study.To find the optimal parameters for a UAV to fly and spray under certain environmental conditions,a three-dimensional model of the target crop was established first,followed by a detailed simulation of droplet spraying.As a demonstration case,a grass model was developed and used as the target plant,and a physics-based method was used to simulate realistically the movement of the droplets in the air as well as the interaction between the droplets and the plant to obtain the droplet deposition rate under the specified operating parameters.Furthermore,the standard Particle Swarm Optimization(PSO)algorithm was used to optimize the UAV operating parameters to obtain the best operating parameters.The results indicate that using the standard PSO algorithm to optimize the operating parameters of the drone could significantly improve the deposition rate and find the best operating parameters.展开更多
Single event transient of a real p-n junction in a 0.18μm bulk process is studied by 3D TCAD simulation. The impact of voltage, temperature, substrate concentration, and LET on SET is studied. Our simulation results ...Single event transient of a real p-n junction in a 0.18μm bulk process is studied by 3D TCAD simulation. The impact of voltage, temperature, substrate concentration, and LET on SET is studied. Our simulation results demonstrate that biases in the range 1.62 to 1.98V influence DSET current shape greatly and total collected charge weakly. Peak current and charge collection within 2ns decreases as temperature increases,and temperature has a stronger influence on SET currents than on total charge. Typical variation of substrate concentration in modern VDSM processes has a negligible effect on SEEs. Both peak current and total collection charge increases as LET increases.展开更多
The inductive skull melting technology has many advantages for melting of innovative materials in the field of glasses and oxides.It offers high processing temperatures and the compliance of necessary purities at the ...The inductive skull melting technology has many advantages for melting of innovative materials in the field of glasses and oxides.It offers high processing temperatures and the compliance of necessary purities at the same time. Applicable materials are in particular optical glasses,which are applied for lenses,fibers or filters,because the skull melting technology allows high process temperatures and high purities of the final product.In the production of glass materials strong requirements have to be fulfilled regarding the optical characteristics,which are mainly defined and influenced by the melting of the raw material and the following refining process.An unsolved problem in the melting process of glasses and oxides using the inductive skull melting technology was in the past the unknown heat and mass transfer in the melt because temperature and melt flow measurements in the melt are practically impossible due to the high temperatures.On the other hand the temperature and velocity distribution in the melt is very important regarding the safety of the melting process,the process control for producing the required properties of the material or the further development of skull melting installations.The paper describes a new numerical model which is able to simulate the instationary 3D melt flow of glasses and oxides.The numerical model takes into account electromagnetic,convection and Marangoni forces.By this a comprehensive view of the hidden processes in the practical experiments could be obtained. By means of the new numerical model different glass and oxide melting processes were simulated and the results were compared with experimental results.The comparisons show first of all a very good agreement between experimental and numerical results at the melt surfaces.Additionally the numerical results allow to look much deeper inside the melt and show interesting new effects of the heat and mass transfer below the melt surface which were unknown before.展开更多
Minimally invasive surgery is an important technique used for cytopathological examination.Recently,multiple studies have been conducted on a three-dimensional(3D)puncture simulation model as it can reveal the interna...Minimally invasive surgery is an important technique used for cytopathological examination.Recently,multiple studies have been conducted on a three-dimensional(3D)puncture simulation model as it can reveal the internal deformation state of the tissue at the micro level.In this study,a viscoelastic constitutive equation suitable for muscle tissue was derived.Additionally,a method was developed to define the fracture characteristics of muscle tissue material during the simulation process.The fracture of the muscle tissue in contact with the puncture needle was simulated using the cohesive zone model and a 3D puncture finite element model was established to analyze the deformation of the muscle tissue.The stress nephogram and reaction force under different parameters were compared and analyzed to study the deformation of the biological soft tissue and guide the actual operation process and reduce pain.展开更多
This paper presents a new approach to parallelize 3D lattice Monte Carlo algorithms used in the numerical simulation of polymer on ZiQiang 2000 a cluster of symmetric multiprocessors (SMPs). The combined load for cel...This paper presents a new approach to parallelize 3D lattice Monte Carlo algorithms used in the numerical simulation of polymer on ZiQiang 2000 a cluster of symmetric multiprocessors (SMPs). The combined load for cell and energy calculations over the time step is balanced together to form a single spatial decomposition. Basic aspects and strategies of running Monte Carlo calculations on parallel computers are studied. Different steps involved in porting the software on a parallel architecture based on ZiQiang 2000 running under Linux and MPI are described briefly. It is found that parallelization becomes more advantageous when either the lattice is very large or the model contains many cells and chains.展开更多
The radial ultrasonic rolling electrochemical micromachining(RUR-EMM)combined rolling electrochemical micromachining(R-EMM)and ultrasonic vibration was studied in this paper.The fundamental understanding of the machin...The radial ultrasonic rolling electrochemical micromachining(RUR-EMM)combined rolling electrochemical micromachining(R-EMM)and ultrasonic vibration was studied in this paper.The fundamental understanding of the machining process especially the interaction between multiphysics in the interelectrode gap(IEG)was investigated and discussed by the finite element method.The multiphysics coupling model including flow field model,Joule heating model,material dissolution model and vibration model was built.3D multiphysics simulation based on micro dimples process in RUR-EMM and R-EMM was proposed.Simulation results showed that the electrolyte flowed into and out IEG periodically,gas bubbles were easy to squeeze out and the gas void fraction deceased about 16%to 54%,the maximum current density increased by 1.36 times in RUR-EMM than in R-EMM in one vibration period of time.And application of the ultrasonic vibration increased the electrolyte temperature about 1.3–4.4%in IEG.Verification experiments of the micro dimple process denoted better corrosion consistency of array dimples in RUR-EMM,there was no island at the micro dimple bottom which always formed in R-EMM,and an aggregated deviation of less than 8.7%for the micro dimple depth and 4%for the material removal amount between theory and experiment was obtained.展开更多
Weft knitted fancy fabrics are widely used in knitted garment design. Due to the complexity of the structures, their modeling and simulation needs to be solved in three-dimensional (3D) CAD developments. In this paper...Weft knitted fancy fabrics are widely used in knitted garment design. Due to the complexity of the structures, their modeling and simulation needs to be solved in three-dimensional (3D) CAD developments. In this paper, 3D loop geometrical models of weft knitted fancy structures, including tuck stitch, jacquard stitch, transfer stitch and fleecy stitch, were developed based on an improved model of plain loop, and their central axes as some 3D space curves were achieved by using Non-Uniform Rational B-Splines (NURBS). The 3D visual simulation programme was written in C++ programming language using OpenGL, which was a function library of 3D graphics. Some examples of weft knitted fancy fabrics were generated and practical application of 3D simulation was discussed.展开更多
When heavy machines and large scaled receiver system of communication equipment are manufactured, it always needs to produce large-sized steel castings, aluminum castings and etc. Some defects of hot cracking by therm...When heavy machines and large scaled receiver system of communication equipment are manufactured, it always needs to produce large-sized steel castings, aluminum castings and etc. Some defects of hot cracking by thermal stress often appear during solidification process as these castings are produced, which results in failure of castings. Therefore predicting the effects of technological parameters for production of castings on the thermal stress during solidification process becomes an important means. In this paper, the mathematical models have been established and numerical calculation of temperature fields by using finite difference method (FDM) and then thermal stress fields by using finite element method (FEM) during solidification process of castings have been carried out. The technological parameters of production have been optimized by the results of calculation and the defects of hot cracking have been eliminated. Modeling and simulation of 3D thermal stress during solidification processes of large-sized castings provided a scientific basis, which promoted further development of advanced manufacturing technique.展开更多
A microtubule gliding assay is a biological experiment observing the dynamics of microtubules driven by motor proteins fixed on a glass surface. When appropriate microtubule interactions are set up on gliding assay ex...A microtubule gliding assay is a biological experiment observing the dynamics of microtubules driven by motor proteins fixed on a glass surface. When appropriate microtubule interactions are set up on gliding assay experiments, microtubules often organize and create higher-level dynamics such as ring and bundle structures. In order to reproduce such higher-level dynamics on computers, we have been focusing on making a real-time 3D microtubule simulation. This real-time 3D microtubule simulation enables us to gain more knowledge on microtubule dynamics and their swarm movements by means of adjusting simulation paranleters in a real-time fashion. One of the technical challenges when creating a real-time 3D simulation is balancing the 3D rendering and the computing performance. Graphics processor unit （GPU） programming plays an essential role in balancing the millions of tasks, and makes this real-time 3D simulation possible. By the use of general-purpose computing on graphics processing units （GPGPU） programming we are able to run the simulation in a massively parallel fashion, even when dealing with more complex interactions between microtubules such as overriding and snuggling. Due to performance being an important factor, a performance n, odel has also been constructed from the analysis of the microtubule simulation and it is consistent with the performance measurements on different GPGPU architectures with regards to the number of cores and clock cycles.展开更多
The purpose of this study is to verify an 1D multi-plate heat-transfer model estimating the temperature distribution on the interface between polymer electrolyte membrane and catalyst layer at cathode in single cell o...The purpose of this study is to verify an 1D multi-plate heat-transfer model estimating the temperature distribution on the interface between polymer electrolyte membrane and catalyst layer at cathode in single cell of polymer electrolyte fuel cell, which is named as reaction surface in this study, with a 3D numerical simulation model solving many governing equations on the coupling phenomena in the cell. The results from both models/simulations agreed well. The effects of initial operation temperature, flow rate, and relative humidity of supply gas on temperature distribution on the reaction surface were also investigated. It was found in both 1D and 3D simulations that, the temperature rise （i.e., Treact-Tini） of the reaction surface from initial operation temperature at 70℃ was higher than that at 80℃ irrespective of flow rate of supply gas. The effect of relative humidity of supply gas on Treact- Tini near the inlet of the cell was small. Compared to the previous studies conducted under the similar operation conditions, the Treact - Tini calculated by 1D multi-plate heat-transfer model in this study as well as numerical simulation using 3D model was reasonable.展开更多
A coupled discrete-continuum simulation incorporating a 3D aspect and non-circular particles was performed to analyze soil-pile interactions during pile penetration in sand.A self-developed non-circular particle numer...A coupled discrete-continuum simulation incorporating a 3D aspect and non-circular particles was performed to analyze soil-pile interactions during pile penetration in sand.A self-developed non-circular particle numerical simulation program was used which considered sand near the pile as interacted particles using a discrete element method;the sand away from the pile was simulated as a continuous medium exhibiting linear elastic behaviors.The domain analyzed was divided into two zones.Contact forces at the interface between the two zones were obtained from a discrete zone and applied to the continuum boundaries as nodal forces,while the interface velocities were obtained from the continuum zone and applied to the discrete boundaries.We show that the coupled discrete-continuum simulation can give a microscopic description of the pile penetration process without losing the discrete nature of the zone concerned,and may significantly improve computational efficiency.展开更多
An SOI MOSFET with FINFET structure is simulated using a 3 D simulator. I V characteristics and sub threshold characteristics,as well as the short channel effect(SCE) are carefully investigated.SCE can be well c...An SOI MOSFET with FINFET structure is simulated using a 3 D simulator. I V characteristics and sub threshold characteristics,as well as the short channel effect(SCE) are carefully investigated.SCE can be well controlled by reducing fin height.Good performance can be achieved with thin height,so fin height is considered as a key parameter in device design.Simulation results show that FINFETs present performance superior to conventional single gate devices.展开更多
The fabrication process dependent effects on single event effects （SEEs） are investigated in a commercial silicon- germanium heterojunction bipolar transistor （SiGe HBT） using three-dimensional （3D） TCAD simulat...The fabrication process dependent effects on single event effects （SEEs） are investigated in a commercial silicon- germanium heterojunction bipolar transistor （SiGe HBT） using three-dimensional （3D） TCAD simulations. The influences of device structure and doping concentration on SEEs are discussed via analysis of current transient and charge collection induced by ions strike. The results show that the SEEs representation of current transient is different from representation of the charge collection for the same process parameters. To be specific, the area of C/S junction is the key parameter that affects charge collection of SEE. Both current transient and charge collection are dependent on the doping of collector and substrate. The base doping slightly influences transient currents of base, emitter, and collector terminals. However, the SEEs of SiGe HBT are hardly affected by the doping of epitaxial base and the content of Ge.展开更多
基金National Natural Science Foundation of China Under Grant No. 50408003National Scientifi c and Technical Supporting Programs Funded by Ministry of Science & Technology of China Under Grant No. 2006BAC13B01
文摘In this paper, near-fault strong ground motions caused by a surface rupture fault （SRF） and a buried fault （BF） are numerically simulated and compared by using a time-space-decoupled, explicit finite element method combined with a multi-transmitting formula （MTF） of an artificial boundary. Prior to the comparison, verification of the explicit element method and the MTF is conducted. The comparison results show that the final dislocation of the SRF is larger than the BF for the same stress drop on the fault plane. The maximum final dislocation occurs on the fault upper line for the SRF; however, for the BE the maximum final dislocation is located on the fault central part. Meanwhile, the PGA, PGV and PGD of long period ground motions （≤ 1 Hz） generated by the SRF are much higher than those of the BF in the near-fault region. The peak value of the velocity pulse generated by the SRF is also higher than the BE Furthermore, it is found that in a very narrow region along the fault trace, ground motions caused by the SRF are much higher than by the BF. These results may explain why SRFs almost always cause heavy damage in near-fault regions compared to buried faults.
文摘Objective To investigate the effect of computer aided 3D simulation technique for treating complicated foot and ankle fractures precisely.Methods From November 2007 to August 2009,255 patients with complicated foot and ankle fractures
基金supported by the National Natural Science Foundation of China(Grant Nos.41807277,42172306,and U1965204)the Natural Science Foundation of Hebei Province(Grant No.D2019202440)。
文摘The numerical simulation of internal features,such as inclusions and voids,is important to analyze their impact on the performance of composite materials.However,the complex geometries of internal features and the induced continuous-discontinuous(C-D)deformation fields are challenges to their numerical simulation.In this study,a 3D approach using a simple mesh to simulate irregular internal geometries is developed for the first time.With the help of a developed voxel crack model,image models that are efficient when recording complex geometries are directly imported into the simulation.Surface reconstructions,which are usually labor-intensive,are excluded from this approach.Moreover,using image models as the geometric input,image processing techniques are applied to detect material interfaces and develop contact pairs.Then,the C-D deformations of the complex internal features are directly calculated based on the numerical manifold method.The accuracy and convergence of the developed3D approach are examined based on multiple benchmarks.Successful 3D C-D simulation of sandstones with naturally formed complex microfeatures demonstrates the capability of the developed approach.
基金supported by the National Natural Science Foundation of China(Grant Nos.52404155 and 52304111)State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining&Technology,Beijing(Grant No.XD2024006).
文摘Drilling and blasting,characterized by their efficiency,ubiquity,and cost-effectiveness,have emerged as predominant techniques in rock excavation;however,they are accompanied by enormous destructive power.Accurately controlling the blasting energy and achieving the directional fracture of a rock mass have become common problems in the field.A two-dimensional blasting(2D blasting)technique was proposed that utilizes the characteristic that the tensile strength of a rock mass is significantly lower than its compressive strength.After blasting,only a 2D crack surface is generated along the predetermined direction,eliminating the damage to the reserved rock mass caused by conventional blasting.However,the interior of a natural rock mass is a"black box",and the process of crack propagation is difficult to capture,resulting in an unclear 2D blasting mechanism.To this end,a single-hole polymethyl methacrylate(PMMA)test piece was used to conduct a 2D blasting experiment with the help of a high-speed camera to capture the dynamic crack propagation process and the digital image correlation(DIC)method to analyze the evolution law of surface strain on the test piece.On this basis,a three-dimensional(3D)finite element model was established based on the progressive failure theory to simulate the stress,strain,damage,and displacement evolution process of the model under 2D blasting.The simulation results were consistent with the experimental results.The research results reveal the 2D blasting mechanism and provide theoretical support for the application of 2D blasting technology in the field of rock excavation.
基金supported by the fundings from 2024 Young Talents Program for Science and Technology Thinking Tanks(No.XMSB20240711041)2024 Student Research Program on Dynamic Simulation and Force-on-Force Exercise of Nuclear Security in 3D Interactive Environment Using Reinforcement Learning,Natural Science Foundation of Top Talent of SZTU(No.GDRC202407)+2 种基金Shenzhen Science and Technology Program(No.KCXFZ20240903092603005)Shenzhen Science and Technology Program(No.JCYJ20241202124703004)Shenzhen Science and Technology Program(No.KJZD20230923114117032)。
文摘Vulnerability assessment is a systematic process to identify security gaps in the design and evaluation of physical protection systems.Adversarial path planning is a widely used method for identifying potential vulnerabilities and threats to the security and resilience of critical infrastructures.However,achieving efficient path optimization in complex large-scale three-dimensional(3D)scenes remains a significant challenge for vulnerability assessment.This paper introduces a novel A^(*)-algorithmic framework for 3D security modeling and vulnerability assessment.Within this framework,the 3D facility models were first developed in 3ds Max and then incorporated into Unity for A^(*)heuristic pathfinding.The A^(*)-heuristic pathfinding algorithm was implemented with a geometric probability model to refine the detection and distance fields and achieve a rational approximation of the cost to reach the goal.An admissible heuristic is ensured by incorporating the minimum probability of detection(P_(D)^(min))and diagonal distance to estimate the heuristic function.The 3D A^(*)heuristic search was demonstrated using a hypothetical laboratory facility,where a comparison was also carried out between the A^(*)and Dijkstra algorithms for optimal path identification.Comparative results indicate that the proposed A^(*)-heuristic algorithm effectively identifies the most vulnerable adversarial pathfinding with high efficiency.Finally,the paper discusses hidden phenomena and open issues in efficient 3D pathfinding for security applications.
基金The Specialized Research Fund for the Doctoral Programof Higher Education(No.20010610023) and the Sino-Finnish Scientific and TechnologicalCooperation Program
文摘The standard three dimensional（3D） k-ε turbulence model was applied to simulate the flow field of a small scale combined oxidation ditch. The moving mesh approach was used to model the rotor of the ditch. Comparison of the computed and the measured data is acceptable. A vertical reverse flow zone in the ditch was found, and it played a very important role in the ditch flow behavior. The flow pattern in the ditch is discussed in detail, and approaches are suggested to improve the hydrodynamic performance in the ditch.
基金supported by the National Natural Science Foundation of China(Grant No.32271983,No.61571400).
文摘With the development of aviation agricultural technology,the number of farmers adopting the use of drones in daily agricultural activities is growing rapidly in recent decades.Among these,a large portion constitutes agricultural drones being used in pest control and crop protection practices,e.g.agriculture spraying of pesticides.Spraying pesticides with drones have proven to be faster than other traditional methods.On the downside,flight time and range of Unmanned Aerial Vehicles(UAV)are often limited.Thus,a proper arrangement of flight height and velocity will greatly improve spraying efficiency.A new strategy to optimize the flight parameters,i.e.flight height and flight velocity,for fixed-wing UAV with a 3D simulation-based approach together with an automatic optimization algorithm was proposed in this study.To find the optimal parameters for a UAV to fly and spray under certain environmental conditions,a three-dimensional model of the target crop was established first,followed by a detailed simulation of droplet spraying.As a demonstration case,a grass model was developed and used as the target plant,and a physics-based method was used to simulate realistically the movement of the droplets in the air as well as the interaction between the droplets and the plant to obtain the droplet deposition rate under the specified operating parameters.Furthermore,the standard Particle Swarm Optimization(PSO)algorithm was used to optimize the UAV operating parameters to obtain the best operating parameters.The results indicate that using the standard PSO algorithm to optimize the operating parameters of the drone could significantly improve the deposition rate and find the best operating parameters.
文摘Single event transient of a real p-n junction in a 0.18μm bulk process is studied by 3D TCAD simulation. The impact of voltage, temperature, substrate concentration, and LET on SET is studied. Our simulation results demonstrate that biases in the range 1.62 to 1.98V influence DSET current shape greatly and total collected charge weakly. Peak current and charge collection within 2ns decreases as temperature increases,and temperature has a stronger influence on SET currents than on total charge. Typical variation of substrate concentration in modern VDSM processes has a negligible effect on SEEs. Both peak current and total collection charge increases as LET increases.
文摘The inductive skull melting technology has many advantages for melting of innovative materials in the field of glasses and oxides.It offers high processing temperatures and the compliance of necessary purities at the same time. Applicable materials are in particular optical glasses,which are applied for lenses,fibers or filters,because the skull melting technology allows high process temperatures and high purities of the final product.In the production of glass materials strong requirements have to be fulfilled regarding the optical characteristics,which are mainly defined and influenced by the melting of the raw material and the following refining process.An unsolved problem in the melting process of glasses and oxides using the inductive skull melting technology was in the past the unknown heat and mass transfer in the melt because temperature and melt flow measurements in the melt are practically impossible due to the high temperatures.On the other hand the temperature and velocity distribution in the melt is very important regarding the safety of the melting process,the process control for producing the required properties of the material or the further development of skull melting installations.The paper describes a new numerical model which is able to simulate the instationary 3D melt flow of glasses and oxides.The numerical model takes into account electromagnetic,convection and Marangoni forces.By this a comprehensive view of the hidden processes in the practical experiments could be obtained. By means of the new numerical model different glass and oxide melting processes were simulated and the results were compared with experimental results.The comparisons show first of all a very good agreement between experimental and numerical results at the melt surfaces.Additionally the numerical results allow to look much deeper inside the melt and show interesting new effects of the heat and mass transfer below the melt surface which were unknown before.
基金Natural Science Foundation of Shandong Province(Grant No.ZR2019JQ19)Interdisciplinary Research Project of Shandong University(Grant No.2017JC027)China Scholarship Council(CSC).
文摘Minimally invasive surgery is an important technique used for cytopathological examination.Recently,multiple studies have been conducted on a three-dimensional(3D)puncture simulation model as it can reveal the internal deformation state of the tissue at the micro level.In this study,a viscoelastic constitutive equation suitable for muscle tissue was derived.Additionally,a method was developed to define the fracture characteristics of muscle tissue material during the simulation process.The fracture of the muscle tissue in contact with the puncture needle was simulated using the cohesive zone model and a 3D puncture finite element model was established to analyze the deformation of the muscle tissue.The stress nephogram and reaction force under different parameters were compared and analyzed to study the deformation of the biological soft tissue and guide the actual operation process and reduce pain.
文摘This paper presents a new approach to parallelize 3D lattice Monte Carlo algorithms used in the numerical simulation of polymer on ZiQiang 2000 a cluster of symmetric multiprocessors (SMPs). The combined load for cell and energy calculations over the time step is balanced together to form a single spatial decomposition. Basic aspects and strategies of running Monte Carlo calculations on parallel computers are studied. Different steps involved in porting the software on a parallel architecture based on ZiQiang 2000 running under Linux and MPI are described briefly. It is found that parallelization becomes more advantageous when either the lattice is very large or the model contains many cells and chains.
基金financial support of the projects from the National Natural Science Foundation of China(Nos.51975532 and 51475428)the Zhejiang Provincial Natural Science Foundation(No.LY19E050007)。
文摘The radial ultrasonic rolling electrochemical micromachining(RUR-EMM)combined rolling electrochemical micromachining(R-EMM)and ultrasonic vibration was studied in this paper.The fundamental understanding of the machining process especially the interaction between multiphysics in the interelectrode gap(IEG)was investigated and discussed by the finite element method.The multiphysics coupling model including flow field model,Joule heating model,material dissolution model and vibration model was built.3D multiphysics simulation based on micro dimples process in RUR-EMM and R-EMM was proposed.Simulation results showed that the electrolyte flowed into and out IEG periodically,gas bubbles were easy to squeeze out and the gas void fraction deceased about 16%to 54%,the maximum current density increased by 1.36 times in RUR-EMM than in R-EMM in one vibration period of time.And application of the ultrasonic vibration increased the electrolyte temperature about 1.3–4.4%in IEG.Verification experiments of the micro dimple process denoted better corrosion consistency of array dimples in RUR-EMM,there was no island at the micro dimple bottom which always formed in R-EMM,and an aggregated deviation of less than 8.7%for the micro dimple depth and 4%for the material removal amount between theory and experiment was obtained.
基金Natural Science Foundation of Tianjin,China( No. 11JCYBJC26400) Tianjin High School Scientific and Technology Fund Planning Project,China( No. 20100310)
文摘Weft knitted fancy fabrics are widely used in knitted garment design. Due to the complexity of the structures, their modeling and simulation needs to be solved in three-dimensional (3D) CAD developments. In this paper, 3D loop geometrical models of weft knitted fancy structures, including tuck stitch, jacquard stitch, transfer stitch and fleecy stitch, were developed based on an improved model of plain loop, and their central axes as some 3D space curves were achieved by using Non-Uniform Rational B-Splines (NURBS). The 3D visual simulation programme was written in C++ programming language using OpenGL, which was a function library of 3D graphics. Some examples of weft knitted fancy fabrics were generated and practical application of 3D simulation was discussed.
文摘When heavy machines and large scaled receiver system of communication equipment are manufactured, it always needs to produce large-sized steel castings, aluminum castings and etc. Some defects of hot cracking by thermal stress often appear during solidification process as these castings are produced, which results in failure of castings. Therefore predicting the effects of technological parameters for production of castings on the thermal stress during solidification process becomes an important means. In this paper, the mathematical models have been established and numerical calculation of temperature fields by using finite difference method (FDM) and then thermal stress fields by using finite element method (FEM) during solidification process of castings have been carried out. The technological parameters of production have been optimized by the results of calculation and the defects of hot cracking have been eliminated. Modeling and simulation of 3D thermal stress during solidification processes of large-sized castings provided a scientific basis, which promoted further development of advanced manufacturing technique.
基金supported by a Grant-in-Aid for Scientific Research on Innovation Areas "Molecular Robotics"(No.24104004) of the Ministry of Education,Culture,Sports,Science,and Technology,Japan
文摘A microtubule gliding assay is a biological experiment observing the dynamics of microtubules driven by motor proteins fixed on a glass surface. When appropriate microtubule interactions are set up on gliding assay experiments, microtubules often organize and create higher-level dynamics such as ring and bundle structures. In order to reproduce such higher-level dynamics on computers, we have been focusing on making a real-time 3D microtubule simulation. This real-time 3D microtubule simulation enables us to gain more knowledge on microtubule dynamics and their swarm movements by means of adjusting simulation paranleters in a real-time fashion. One of the technical challenges when creating a real-time 3D simulation is balancing the 3D rendering and the computing performance. Graphics processor unit （GPU） programming plays an essential role in balancing the millions of tasks, and makes this real-time 3D simulation possible. By the use of general-purpose computing on graphics processing units （GPGPU） programming we are able to run the simulation in a massively parallel fashion, even when dealing with more complex interactions between microtubules such as overriding and snuggling. Due to performance being an important factor, a performance n, odel has also been constructed from the analysis of the microtubule simulation and it is consistent with the performance measurements on different GPGPU architectures with regards to the number of cores and clock cycles.
文摘The purpose of this study is to verify an 1D multi-plate heat-transfer model estimating the temperature distribution on the interface between polymer electrolyte membrane and catalyst layer at cathode in single cell of polymer electrolyte fuel cell, which is named as reaction surface in this study, with a 3D numerical simulation model solving many governing equations on the coupling phenomena in the cell. The results from both models/simulations agreed well. The effects of initial operation temperature, flow rate, and relative humidity of supply gas on temperature distribution on the reaction surface were also investigated. It was found in both 1D and 3D simulations that, the temperature rise （i.e., Treact-Tini） of the reaction surface from initial operation temperature at 70℃ was higher than that at 80℃ irrespective of flow rate of supply gas. The effect of relative humidity of supply gas on Treact- Tini near the inlet of the cell was small. Compared to the previous studies conducted under the similar operation conditions, the Treact - Tini calculated by 1D multi-plate heat-transfer model in this study as well as numerical simulation using 3D model was reasonable.
基金Project (No.90815008) supported by the National Natural Science Foundation of China
文摘A coupled discrete-continuum simulation incorporating a 3D aspect and non-circular particles was performed to analyze soil-pile interactions during pile penetration in sand.A self-developed non-circular particle numerical simulation program was used which considered sand near the pile as interacted particles using a discrete element method;the sand away from the pile was simulated as a continuous medium exhibiting linear elastic behaviors.The domain analyzed was divided into two zones.Contact forces at the interface between the two zones were obtained from a discrete zone and applied to the continuum boundaries as nodal forces,while the interface velocities were obtained from the continuum zone and applied to the discrete boundaries.We show that the coupled discrete-continuum simulation can give a microscopic description of the pile penetration process without losing the discrete nature of the zone concerned,and may significantly improve computational efficiency.
文摘An SOI MOSFET with FINFET structure is simulated using a 3 D simulator. I V characteristics and sub threshold characteristics,as well as the short channel effect(SCE) are carefully investigated.SCE can be well controlled by reducing fin height.Good performance can be achieved with thin height,so fin height is considered as a key parameter in device design.Simulation results show that FINFETs present performance superior to conventional single gate devices.
基金supported by the National Natural Science Foundation of China(Grant Nos.61274106,11175138,and 61601352)
文摘The fabrication process dependent effects on single event effects （SEEs） are investigated in a commercial silicon- germanium heterojunction bipolar transistor （SiGe HBT） using three-dimensional （3D） TCAD simulations. The influences of device structure and doping concentration on SEEs are discussed via analysis of current transient and charge collection induced by ions strike. The results show that the SEEs representation of current transient is different from representation of the charge collection for the same process parameters. To be specific, the area of C/S junction is the key parameter that affects charge collection of SEE. Both current transient and charge collection are dependent on the doping of collector and substrate. The base doping slightly influences transient currents of base, emitter, and collector terminals. However, the SEEs of SiGe HBT are hardly affected by the doping of epitaxial base and the content of Ge.
