Synthetic aperture radar(SAR)three-dimensional(3D)imaging technology can reconstruct the complete structure of observed targets and has been a hot topic.Compared with tomographic SAR,array interferometric SAR,and circ...Synthetic aperture radar(SAR)three-dimensional(3D)imaging technology can reconstruct the complete structure of observed targets and has been a hot topic.Compared with tomographic SAR,array interferometric SAR,and circular SAR,curve SAR can use less data to achieve 3D positioning of targets.Most existing algorithms for estimating Doppler frequency modulation(FM)rate are based on sub aperture partitioning,resulting in low computational efficiency.To address this,this article establishes a target height estimation model,which reflects the relation-ship between the height and the residual Doppler FM rate for spaceborne curve SAR.Then,a fast SAR 3D localization processing flow based on fractional Fourier transform(FrFT)is proposed.Experimental verification demonstrates that this method can estimate the Doppler FM of the target column by column,and the 3D position error for non-overlapping targets is controlled within 1 m.For overlapping points with an intensity ratio greater than 1.5,the root mean square error(RMSE)of the estimation results is around 5 m.If the separation between overlapping points is greater than 35 m,the RMSE decreases to approximately 2 m.展开更多
Nitrogen doping in chemical vapor deposition-derived ultrananocrystalline diamond(UNCD)films in-creases the electronic conductivity,yet its microstructural effects on electron transport are insufficiently understood.W...Nitrogen doping in chemical vapor deposition-derived ultrananocrystalline diamond(UNCD)films in-creases the electronic conductivity,yet its microstructural effects on electron transport are insufficiently understood.We investigated the formation of nitrogen-induced diaph-ite structures(hybrid diamond-graphite phases)and their role in changing the conductivity.Nitrogen doping in a hy-drogen-rich plasma environment promotes the emergence of unique sp^(3)-sp^(2)bonding interfaces,where diamond grains are covalently integrated with graphitic domains,facilitating a structure-driven electronic transition.High-resolution transmis-sion electron microscopy and selected area electron diffraction reveal five-fold,six-fold and twelve-fold symmetries,along with an atypical{200}crystallographic reflection,confirming diaphite formation in 5%and 10%N-doped UNCD films,while high-er doping levels(15%and 20%)result in extensive graphitization.Raman spectroscopy tracks the evolution of sp^(2)bonding with increasing nitrogen content,while atomic force microscopy and X-ray diffraction indicate a consistent diamond grain size of~8 nm.Cryogenic electronic transport measurements reveal a conductivity increase from 8.72 to 708 S/cm as the nitrogen dop-ing level increases from 5%to 20%,which is attributed to defect-mediated carrier transport and 3D weak localization.The res-ulting conductivity is three orders of magnitude higher than previously reported.These findings establish a direct correlation between diaphite structural polymorphism and tunable electronic properties in nitrogen-doped UNCD films,offering new ways for defect-engineering diamond-based electronic materials.展开更多
In wireless sensor networks （WSNs） the position information of individual nodes is a matter of vital importance because allows the implementation of necessary network functions such as routing, querying and other ap...In wireless sensor networks （WSNs） the position information of individual nodes is a matter of vital importance because allows the implementation of necessary network functions such as routing, querying and other applications. The objective of this paper is to propose an algorithm of three-dimensional distributed range-free localization for WSNs, using a mobile beacon （MB） equipped with a rotary and tilting directional antenna. This algorithm, denominated as the three-dimensional azimuthally defined area localization algorithm （3D- ADAL）, is executed in each sensor node and is based only on the analysis of the information received from the MB, therefore is energy efficient and contributes to extend the lifetime of the sensor network. Additionally the proposed algorithm has the advantage of being simple and economical. The simulation results show that the proposed algorithm is a practical, effective and accurate method for a three-dimensional location of sensor nodes in a WSN.展开更多
The Internet of Things(IoT)is envisioned as a network of various wireless sensor nodes communicating with each other to offer state-of-the-art solutions to real-time problems.These networks of wireless sensors monitor...The Internet of Things(IoT)is envisioned as a network of various wireless sensor nodes communicating with each other to offer state-of-the-art solutions to real-time problems.These networks of wireless sensors monitor the physical environment and report the collected data to the base station,allowing for smarter decisions.Localization in wireless sensor networks is to localize a sensor node in a two-dimensional plane.However,in some application areas,such as various surveillances,underwater monitoring systems,and various environmental monitoring applications,wireless sensors are deployed in a three-dimensional plane.Recently,localization-based applications have emerged as one of the most promising services related to IoT.In this paper,we propose a novel distributed range-free algorithm for node localization in wireless sensor networks.The proposed three-dimensional hop localization algorithm is based on the distance error correction factor.In this algorithm,the error decreases with the localization process.The distance correction factor is used at various stages of the localization process,which ultimately mitigates the error.We simulated the proposed algorithm using MATLAB and verified the accuracy of the algorithm.The simulation results are compared with some of the well-known existing algorithms in the literature.The results show that the proposed three-dimensional error-correctionbased algorithm performs better than existing algorithms.展开更多
The space-air-ground integrated network(SAGIN)combines the superiority of the satellite,aerial,and ground communications,which is envisioned to provide high-precision positioning ability as well as seamless connectivi...The space-air-ground integrated network(SAGIN)combines the superiority of the satellite,aerial,and ground communications,which is envisioned to provide high-precision positioning ability as well as seamless connectivity in the 5G and Beyond 5G(B5G)systems.In this paper,we propose a three-dimensional SAGIN localization scheme for ground agents utilizing multi-source information from satellites,base stations and unmanned aerial vehicles(UAVs).Based on the designed scheme,we derive the positioning performance bound and establish a distributed maximum likelihood algorithm to jointly estimate the positions and clock offsets of ground agents.Simulation results demonstrate the validity of the SAGIN localization scheme and reveal the effects of the number of satellites,the number of base stations,the number of UAVs and clock noise on positioning performance.展开更多
A localization method based on distance function of projected features is presented to solve the accuracy reduction or failure problem due to occlusion and blurring caused by smog, when dealing with vision based local...A localization method based on distance function of projected features is presented to solve the accuracy reduction or failure problem due to occlusion and blurring caused by smog, when dealing with vision based localization for target oil and gas wellhead （OGWH）. Firstly, the target OGWH is modeled as a cylinder with marker, and a vector with redundant parameter is used to describe its pose. Secondly, the explicit mapping relationship between the pose vector with redundant parameter and projected features is derived. Then, a 2D-point-to-feature distance function is proposed, as well as its derivative. Finally, based on this distance function and its derivative, an algorithm is proposed to estimate the pose of target OGWH directly according to the 2D image information, and the validity of the method is verified by both synthetic data and real image experiments. The results show that this method is able to accomplish the localization in the case of occlusion and blurring, and its anti-noise ability is good especially with noise ratio of less than 70%.展开更多
In this paper,an effective target locating approach based on the fingerprint fusion posi-tioning(FFP)method is proposed which integrates the time-difference of arrival(TDOA)and the received signal strength according t...In this paper,an effective target locating approach based on the fingerprint fusion posi-tioning(FFP)method is proposed which integrates the time-difference of arrival(TDOA)and the received signal strength according to the statistical variance of target position in the stationary 3D scenarios.The FFP method fuses the pedestrian dead reckoning(PDR)estimation to solve the moving target localization problem.We also introduce auxiliary parameters to estimate the target motion state.Subsequently,we can locate the static pedestrians and track the the moving target.For the case study,eight access stationary points are placed on a bookshelf and hypermarket;one target node is moving inside hypermarkets in 2D and 3D scenarios or stationary on the bookshelf.We compare the performance of our proposed method with existing localization algorithms such as k-nearest neighbor,weighted k-nearest neighbor,pure TDOA and fingerprinting combining Bayesian frameworks including the extended Kalman filter,unscented Kalman filter and particle fil-ter(PF).The proposed approach outperforms obviously the counterpart methodologies in terms of the root mean square error and the cumulative distribution function of localization errors,espe-cially in the 3D scenarios.Simulation results corroborate the effectiveness of our proposed approach.展开更多
In response to the evolving challenges posed by small unmanned aerial vehicles(UAVs),which have the potential to transport harmful payloads or cause significant damage,we present AV-FDTI,an innovative Audio-Visual Fus...In response to the evolving challenges posed by small unmanned aerial vehicles(UAVs),which have the potential to transport harmful payloads or cause significant damage,we present AV-FDTI,an innovative Audio-Visual Fusion system designed for Drone Threat Identification.AV-FDTI leverages the fusion of audio and omnidirectional camera feature inputs,providing a comprehensive solution to enhance the precision and resilience of drone classification and 3D localization.Specifically,AV-FDTI employs a CRNN network to capture vital temporal dynamics within the audio domain and utilizes a pretrained ResNet50 model for image feature extraction.Furthermore,we adopt a visual information entropy and cross-attention-based mechanism to enhance the fusion of visual and audio data.Notably,our system is trained based on automated Leica tracking annotations,offering accurate ground truth data with millimeter-level accuracy.Comprehensive comparative evaluations demonstrate the superiority of our solution over the existing systems.In our commitment to advancing this field,we will release this work as open-source code and wearable AV-FDTI design,contributing valuable resources to the research community.展开更多
Improving three-dimensional(3D)localization precision is of paramount importance for super-resolution imaging.By properly engineering the point spread function(PSF),such as utilizing Laguerre–Gaussian(LG)modes and th...Improving three-dimensional(3D)localization precision is of paramount importance for super-resolution imaging.By properly engineering the point spread function(PSF),such as utilizing Laguerre–Gaussian(LG)modes and their superposition,the ultimate limits of 3D localization precision can be enhanced.However,achieving these limits is challenging,as it often involves complicated detection strategies and practical limitations.In this work,we rigorously derive the ultimate 3D localization limits of LG modes and their superposition,specifically rotation modes,in the multi-parameter estimation framework.Our findings reveal that a significant portion of the information required for achieving 3D super-localization of LG modes can be obtained through feasible intensity detection.Moreover,the 3D ultimate precision can be achieved when the azimuthal index l is zero.To provide a proof-of-principle demonstration,we develop an iterative maximum likelihood estimation(MLE)algorithm that converges to the 3D position of a point source,considering the pixelation and detector noise.The experimental implementation exhibits an improvement of up to two-fold in lateral localization precision and up to twenty-fold in axial localization precision when using LG modes compared to Gaussian mode.We also showcase the superior axial localization capability of the rotation mode within the near-focus region,effectively overcoming the limitations encountered by single LG modes.Notably,in the presence of realistic aberration,the algorithm robustly achieves the Cramer-Rao lower bound.Our findings provide valuable insights for evaluating and optimizing the achievable 3D localization precision,which will facilitate the advancements in super-resolution microscopy.展开更多
View synthesis is an important building block in three dimension（3D） video processing and communications.Based on one or several views,view synthesis creates other views for the purpose of view prediction（for compr...View synthesis is an important building block in three dimension（3D） video processing and communications.Based on one or several views,view synthesis creates other views for the purpose of view prediction（for compression） or view rendering（for multiview-display）.The quality of view synthesis depends on how one fills the occlusion area as well as how the pixels are created.Consequently,luminance adjustment and hole filling are two key issues in view synthesis.In this paper,two views are used to produce an arbitrary virtual synthesized view.One view is merged into another view using a local luminance adjustment method,based on local neighborhood region for the calculation of adjustment coefficient.Moreover,a maximum neighborhood spreading strength hole filling method is presented to deal with the micro texture structure when the hole is being filled.For each pixel at the hole boundary,its neighborhood pixels with the maximum spreading strength direction are selected as candidates;and among them,the pixel with the maximum spreading strength is used to fill the hole from boundary to center.If there still exist disocclusion pixels after once scan,the filling process is repeated until all hole pixels are filled.Simulation results show that the proposed method is efficient,robust and achieves high performance in subjection and objection.展开更多
The aim of this paper is to establish and validate a portable device for the local three dimensional deformation measurements using a single camera combined with a triangular prism mirror and two mirrors. The mirrors ...The aim of this paper is to establish and validate a portable device for the local three dimensional deformation measurements using a single camera combined with a triangular prism mirror and two mirrors. The mirrors were utilized to convert a single camera into a stereo image system, which views a test object from two different directions and records the surface images of the test specimen on the two halves of the camera sensor in order to achieve a three-dimensional measurement. The proposed system consists of a single camera and the reflection system was integrated into a portable device to achieve a truly portable, low-cost, local three-dimensional deformation measurement, one-time calibration and easy implementation in situ. The optical design and measurement procedures to obtain the three-dimensional （3D） deformation measurements of the proposed system were described in detail. The efficiency and precision of the proposed system were verified by measuring the displacements of a translated fiat plate. As a practical application, the proposed system is used to measure the out-of-plane displacement of an aluminum circular plate with a central load. Moreover, the normal strain measurement of a plastic beam under symmetric four-point bending via an outer loading frame was also presented. The measurement results are in good accordance with the data obtained by strain gauges. The experimental results revealed that the proposed system was practicable and effective for the local three-dimensional deformation measurement. This system well-suited to both laboratory and field condition and will have significant application in the fields of engineering.展开更多
基金supported in part by the National Key Research and Development Program of China(No.SQ2022YFB 3900055)in part by the National Natural Science Foundation of China(No.62101039)+1 种基金in part by the Shandong Excellent Young Scientists Fund Program(Overseas)in part by China Postdoctoral Science Foundation(No.2022M720443).
文摘Synthetic aperture radar(SAR)three-dimensional(3D)imaging technology can reconstruct the complete structure of observed targets and has been a hot topic.Compared with tomographic SAR,array interferometric SAR,and circular SAR,curve SAR can use less data to achieve 3D positioning of targets.Most existing algorithms for estimating Doppler frequency modulation(FM)rate are based on sub aperture partitioning,resulting in low computational efficiency.To address this,this article establishes a target height estimation model,which reflects the relation-ship between the height and the residual Doppler FM rate for spaceborne curve SAR.Then,a fast SAR 3D localization processing flow based on fractional Fourier transform(FrFT)is proposed.Experimental verification demonstrates that this method can estimate the Doppler FM of the target column by column,and the 3D position error for non-overlapping targets is controlled within 1 m.For overlapping points with an intensity ratio greater than 1.5,the root mean square error(RMSE)of the estimation results is around 5 m.If the separation between overlapping points is greater than 35 m,the RMSE decreases to approximately 2 m.
文摘Nitrogen doping in chemical vapor deposition-derived ultrananocrystalline diamond(UNCD)films in-creases the electronic conductivity,yet its microstructural effects on electron transport are insufficiently understood.We investigated the formation of nitrogen-induced diaph-ite structures(hybrid diamond-graphite phases)and their role in changing the conductivity.Nitrogen doping in a hy-drogen-rich plasma environment promotes the emergence of unique sp^(3)-sp^(2)bonding interfaces,where diamond grains are covalently integrated with graphitic domains,facilitating a structure-driven electronic transition.High-resolution transmis-sion electron microscopy and selected area electron diffraction reveal five-fold,six-fold and twelve-fold symmetries,along with an atypical{200}crystallographic reflection,confirming diaphite formation in 5%and 10%N-doped UNCD films,while high-er doping levels(15%and 20%)result in extensive graphitization.Raman spectroscopy tracks the evolution of sp^(2)bonding with increasing nitrogen content,while atomic force microscopy and X-ray diffraction indicate a consistent diamond grain size of~8 nm.Cryogenic electronic transport measurements reveal a conductivity increase from 8.72 to 708 S/cm as the nitrogen dop-ing level increases from 5%to 20%,which is attributed to defect-mediated carrier transport and 3D weak localization.The res-ulting conductivity is three orders of magnitude higher than previously reported.These findings establish a direct correlation between diaphite structural polymorphism and tunable electronic properties in nitrogen-doped UNCD films,offering new ways for defect-engineering diamond-based electronic materials.
文摘In wireless sensor networks （WSNs） the position information of individual nodes is a matter of vital importance because allows the implementation of necessary network functions such as routing, querying and other applications. The objective of this paper is to propose an algorithm of three-dimensional distributed range-free localization for WSNs, using a mobile beacon （MB） equipped with a rotary and tilting directional antenna. This algorithm, denominated as the three-dimensional azimuthally defined area localization algorithm （3D- ADAL）, is executed in each sensor node and is based only on the analysis of the information received from the MB, therefore is energy efficient and contributes to extend the lifetime of the sensor network. Additionally the proposed algorithm has the advantage of being simple and economical. The simulation results show that the proposed algorithm is a practical, effective and accurate method for a three-dimensional location of sensor nodes in a WSN.
基金the Research Grant of Kwangwoon University in 2020.
文摘The Internet of Things(IoT)is envisioned as a network of various wireless sensor nodes communicating with each other to offer state-of-the-art solutions to real-time problems.These networks of wireless sensors monitor the physical environment and report the collected data to the base station,allowing for smarter decisions.Localization in wireless sensor networks is to localize a sensor node in a two-dimensional plane.However,in some application areas,such as various surveillances,underwater monitoring systems,and various environmental monitoring applications,wireless sensors are deployed in a three-dimensional plane.Recently,localization-based applications have emerged as one of the most promising services related to IoT.In this paper,we propose a novel distributed range-free algorithm for node localization in wireless sensor networks.The proposed three-dimensional hop localization algorithm is based on the distance error correction factor.In this algorithm,the error decreases with the localization process.The distance correction factor is used at various stages of the localization process,which ultimately mitigates the error.We simulated the proposed algorithm using MATLAB and verified the accuracy of the algorithm.The simulation results are compared with some of the well-known existing algorithms in the literature.The results show that the proposed three-dimensional error-correctionbased algorithm performs better than existing algorithms.
文摘The space-air-ground integrated network(SAGIN)combines the superiority of the satellite,aerial,and ground communications,which is envisioned to provide high-precision positioning ability as well as seamless connectivity in the 5G and Beyond 5G(B5G)systems.In this paper,we propose a three-dimensional SAGIN localization scheme for ground agents utilizing multi-source information from satellites,base stations and unmanned aerial vehicles(UAVs).Based on the designed scheme,we derive the positioning performance bound and establish a distributed maximum likelihood algorithm to jointly estimate the positions and clock offsets of ground agents.Simulation results demonstrate the validity of the SAGIN localization scheme and reveal the effects of the number of satellites,the number of base stations,the number of UAVs and clock noise on positioning performance.
基金supported by National Natural Science Foundation of China(No.61403226)the State Key Laboratory of Tribology of China(No.SKLT09A03)
文摘A localization method based on distance function of projected features is presented to solve the accuracy reduction or failure problem due to occlusion and blurring caused by smog, when dealing with vision based localization for target oil and gas wellhead （OGWH）. Firstly, the target OGWH is modeled as a cylinder with marker, and a vector with redundant parameter is used to describe its pose. Secondly, the explicit mapping relationship between the pose vector with redundant parameter and projected features is derived. Then, a 2D-point-to-feature distance function is proposed, as well as its derivative. Finally, based on this distance function and its derivative, an algorithm is proposed to estimate the pose of target OGWH directly according to the 2D image information, and the validity of the method is verified by both synthetic data and real image experiments. The results show that this method is able to accomplish the localization in the case of occlusion and blurring, and its anti-noise ability is good especially with noise ratio of less than 70%.
基金partially supported by the National Natural Science Foun-dation of China(No.62071389).
文摘In this paper,an effective target locating approach based on the fingerprint fusion posi-tioning(FFP)method is proposed which integrates the time-difference of arrival(TDOA)and the received signal strength according to the statistical variance of target position in the stationary 3D scenarios.The FFP method fuses the pedestrian dead reckoning(PDR)estimation to solve the moving target localization problem.We also introduce auxiliary parameters to estimate the target motion state.Subsequently,we can locate the static pedestrians and track the the moving target.For the case study,eight access stationary points are placed on a bookshelf and hypermarket;one target node is moving inside hypermarkets in 2D and 3D scenarios or stationary on the bookshelf.We compare the performance of our proposed method with existing localization algorithms such as k-nearest neighbor,weighted k-nearest neighbor,pure TDOA and fingerprinting combining Bayesian frameworks including the extended Kalman filter,unscented Kalman filter and particle fil-ter(PF).The proposed approach outperforms obviously the counterpart methodologies in terms of the root mean square error and the cumulative distribution function of localization errors,espe-cially in the 3D scenarios.Simulation results corroborate the effectiveness of our proposed approach.
基金National Research Foundation,Singapore,under its Medium-Sized Center for Advanced Robotics Technology Innovation(CARTIN)under project WP5 within the Delta-NTU Corporate Lab with funding support from A*STAR under its IAF-ICP program(Grant no:I2201E0013)and Delta Electronics Inc.
文摘In response to the evolving challenges posed by small unmanned aerial vehicles(UAVs),which have the potential to transport harmful payloads or cause significant damage,we present AV-FDTI,an innovative Audio-Visual Fusion system designed for Drone Threat Identification.AV-FDTI leverages the fusion of audio and omnidirectional camera feature inputs,providing a comprehensive solution to enhance the precision and resilience of drone classification and 3D localization.Specifically,AV-FDTI employs a CRNN network to capture vital temporal dynamics within the audio domain and utilizes a pretrained ResNet50 model for image feature extraction.Furthermore,we adopt a visual information entropy and cross-attention-based mechanism to enhance the fusion of visual and audio data.Notably,our system is trained based on automated Leica tracking annotations,offering accurate ground truth data with millimeter-level accuracy.Comprehensive comparative evaluations demonstrate the superiority of our solution over the existing systems.In our commitment to advancing this field,we will release this work as open-source code and wearable AV-FDTI design,contributing valuable resources to the research community.
基金funding provided by Shanghai Jiao Tong Universitysupported by the National Natural Science Foundation of China(Grants No.61975077)+1 种基金the National Key Research and Development Program of China(Grants No.2019YFA0308704)Civil Aerospace Technology Research Project(Grants No.D050105).
文摘Improving three-dimensional(3D)localization precision is of paramount importance for super-resolution imaging.By properly engineering the point spread function(PSF),such as utilizing Laguerre–Gaussian(LG)modes and their superposition,the ultimate limits of 3D localization precision can be enhanced.However,achieving these limits is challenging,as it often involves complicated detection strategies and practical limitations.In this work,we rigorously derive the ultimate 3D localization limits of LG modes and their superposition,specifically rotation modes,in the multi-parameter estimation framework.Our findings reveal that a significant portion of the information required for achieving 3D super-localization of LG modes can be obtained through feasible intensity detection.Moreover,the 3D ultimate precision can be achieved when the azimuthal index l is zero.To provide a proof-of-principle demonstration,we develop an iterative maximum likelihood estimation(MLE)algorithm that converges to the 3D position of a point source,considering the pixelation and detector noise.The experimental implementation exhibits an improvement of up to two-fold in lateral localization precision and up to twenty-fold in axial localization precision when using LG modes compared to Gaussian mode.We also showcase the superior axial localization capability of the rotation mode within the near-focus region,effectively overcoming the limitations encountered by single LG modes.Notably,in the presence of realistic aberration,the algorithm robustly achieves the Cramer-Rao lower bound.Our findings provide valuable insights for evaluating and optimizing the achievable 3D localization precision,which will facilitate the advancements in super-resolution microscopy.
基金supported by the National Natural Science Foundation of China(61075013)
文摘View synthesis is an important building block in three dimension（3D） video processing and communications.Based on one or several views,view synthesis creates other views for the purpose of view prediction（for compression） or view rendering（for multiview-display）.The quality of view synthesis depends on how one fills the occlusion area as well as how the pixels are created.Consequently,luminance adjustment and hole filling are two key issues in view synthesis.In this paper,two views are used to produce an arbitrary virtual synthesized view.One view is merged into another view using a local luminance adjustment method,based on local neighborhood region for the calculation of adjustment coefficient.Moreover,a maximum neighborhood spreading strength hole filling method is presented to deal with the micro texture structure when the hole is being filled.For each pixel at the hole boundary,its neighborhood pixels with the maximum spreading strength direction are selected as candidates;and among them,the pixel with the maximum spreading strength is used to fill the hole from boundary to center.If there still exist disocclusion pixels after once scan,the filling process is repeated until all hole pixels are filled.Simulation results show that the proposed method is efficient,robust and achieves high performance in subjection and objection.
基金supported by the National Natural Science Foundation of China(Grants Nos.11272089&11532005)Scientific Research Foundation of Graduate School of Southeast University(YBJJ1553)
文摘The aim of this paper is to establish and validate a portable device for the local three dimensional deformation measurements using a single camera combined with a triangular prism mirror and two mirrors. The mirrors were utilized to convert a single camera into a stereo image system, which views a test object from two different directions and records the surface images of the test specimen on the two halves of the camera sensor in order to achieve a three-dimensional measurement. The proposed system consists of a single camera and the reflection system was integrated into a portable device to achieve a truly portable, low-cost, local three-dimensional deformation measurement, one-time calibration and easy implementation in situ. The optical design and measurement procedures to obtain the three-dimensional （3D） deformation measurements of the proposed system were described in detail. The efficiency and precision of the proposed system were verified by measuring the displacements of a translated fiat plate. As a practical application, the proposed system is used to measure the out-of-plane displacement of an aluminum circular plate with a central load. Moreover, the normal strain measurement of a plastic beam under symmetric four-point bending via an outer loading frame was also presented. The measurement results are in good accordance with the data obtained by strain gauges. The experimental results revealed that the proposed system was practicable and effective for the local three-dimensional deformation measurement. This system well-suited to both laboratory and field condition and will have significant application in the fields of engineering.
