The first example of the microfluidic chips(MFCs) consisting of centimeter-level 3D channels with highdensity and large-volume fabricated by femtosecond laser micromachining were utilized to develop a time-saving, eco...The first example of the microfluidic chips(MFCs) consisting of centimeter-level 3D channels with highdensity and large-volume fabricated by femtosecond laser micromachining were utilized to develop a time-saving, economical and hazardless flow synthesis process, and its advantages have been proved by in situ formation of aryldiazonium salts and subsequent borylation with bis(pinacolato)diboron. There are several important advantages in our 3D MFC-based flow synthesis technology, including the following:(1) the reaction temperature was altered from ice bath to room temperature;(2) the residence time was reduced by 10 times;(3) the yield was greatly improved, that is, several arylboronates were successfully obtained with higher yield compared to traditional batch process. Therefore, it can be envisioned that a novel, simplified flow synthetic protocol will be developed toward green organic synthesis via MFCs.展开更多
Recent developments in the utilization of microfluidic chips(MFCs) have shown their potential utility in multiphase organic synthesis by enabling efficient organic reactions in flow chemistry. However, MFCs technology...Recent developments in the utilization of microfluidic chips(MFCs) have shown their potential utility in multiphase organic synthesis by enabling efficient organic reactions in flow chemistry. However, MFCs technology has been wandering in the laboratory of small dose synthetic routes, which is limited to the level of "tiny" fluid flux. To address this issue, we herein report the first case of the chips with highthroughput 3D channels produced by femtosecond laser being used to create a time-saving, cost-effective and risk-free approach suitable for large-scale flow synthesis. Several multiphase reactions have been successfully prepared on demand in our designed flow synthesis system containing 3D MFCs: 1) benzyl alcohol was converted to benzaldehyde in 3 min with a yield of 97.50% by liquid-liquid two-phase transfer catalytic oxidation;2) organozinc reagents and α-cyano carbonyl carbon compounds were synthesized by solid-liquid two-phase metal insertion reaction in 7 min, and the yield was up to 100%;3) benzoic acid was synthesized by gas-liquid two-phase carboxylation reaction in 2.8 s with a yield of 96%. Significant gains in production rate result from the effective scaling of flow reactors from microliters per hour in MFCs to intermediate milliliters per minute without affecting mass transport performance. Meanwhile,our 3D MFCs show excellent mass and heat transfer efficiency in large-scale industrial units, breaking through the bottleneck in this field. As a result, it is possible to imagine the creation of a new, streamlined flow synthetic technique via MFCs for green multiphase organic synthesis.展开更多
Biomedical field has been seeking a feasible standard drug screening system consisting of 3D tumor model array for drug researching due to providing sufficient samples and simulating actual in vivo tumor growth situat...Biomedical field has been seeking a feasible standard drug screening system consisting of 3D tumor model array for drug researching due to providing sufficient samples and simulating actual in vivo tumor growth situation,which is still a challenge to rapidly and uniformly establish though.Here,we propose a novel drug screening system,namely 3D tumor array chip with“layer cake”structure,for drug screening.Accurate gelatin methacryloyl hydrogel droplets(~0.1μL)containing tumor cells can be automatically deposited on demand with electrohydrodynamic 3D printing.Transparent conductive membrane is introduced as a chip basement for preventing charges accumulation during fabricating and convenient observing during screening.Culturing chambers formed by stainless steel and silicon interlayer is convenient to be assembled and recycled.As this chip is compatible with the existing 96-well culturing plate,the drug screening protocols could keep the same as convention.Important properties of this chip,namely printing stability,customizability,accuracy,microenvironment,tumor functionalization,are detailly examined.As a demonstration,it is applied for screening of epirubicin and paclitaxel with breast tumor cells to confirm the compatibility of the proposed screening system with the traditional screening methods.We believe this chip will potentially play a significant role in drug evaluation in the future.展开更多
Calcium dibutyryladenosine cyclophosphate is a widely used cardiovascular drug.The traditional batch synthesis process suffers from long reaction times,tedious operations,and unstable yields.Herein,a sequential contin...Calcium dibutyryladenosine cyclophosphate is a widely used cardiovascular drug.The traditional batch synthesis process suffers from long reaction times,tedious operations,and unstable yields.Herein,a sequential continuous flow synthesis combined with a multistage in-line purification process of calcium dibutyryladenosine cyclophosphate was developed.The acylation reaction was completed in a continuous coil reactor at 160℃in 20 min.And the high toxic solvent pyridine was replaced by acetonitrile.Furthermore,the multistage in-line purification process was integrated into the homemade 3D circular cyclone-type micromixer chip.Combining with the membrane phase separators,the residence time of the purification step was 30 s.The isolated yield of this sequential continuous process was 92%with 99%purity.展开更多
The high-precision integration of three-dimensional(3D)microoptical components into microfluidics in a customizable manner is crucial for optical sensing,fluorescence analysis,and cell detection in optofluidic applica...The high-precision integration of three-dimensional(3D)microoptical components into microfluidics in a customizable manner is crucial for optical sensing,fluorescence analysis,and cell detection in optofluidic applications;however,it remains challenging for current microfabrication technologies.This paper reports the in-channel integration of flexible two-dimensional(2D)and 3D polymer microoptical devices into glass microfluidics by developing a novel technique:flat scaffold-supported hybrid femtosecond laser microfabrication(FSS-HFLM).The scaffold with an optimal thickness of 1–5 μm is fabricated on the lower internal surface of a microfluidic channel to improve the integration of high-precision microoptical devices on the scaffold by eliminating any undulated internal channel surface caused by wet etching.As a proof of demonstration,two types of typical microoptical devices,namely,2D Fresnel zone plates(FZPs)and 3D refractive microlens arrays(MLAs),are integrated.These devices exhibit multicolor focal spots,elongated(>three times)focal length and imaging of the characters‘RIKEN’in a liquid channel.The resulting optofluidic chips are further used for coupling-free white-light cell counting with a success rate as high as 93%.An optofluidic system with two MLAs and a W-filter is also designed and fabricated for more advanced cell filtering/counting applications.展开更多
基金supported by the Shanghai Municipal Science and Technology Major Project (“Beyond Limits manufacture”)。
文摘The first example of the microfluidic chips(MFCs) consisting of centimeter-level 3D channels with highdensity and large-volume fabricated by femtosecond laser micromachining were utilized to develop a time-saving, economical and hazardless flow synthesis process, and its advantages have been proved by in situ formation of aryldiazonium salts and subsequent borylation with bis(pinacolato)diboron. There are several important advantages in our 3D MFC-based flow synthesis technology, including the following:(1) the reaction temperature was altered from ice bath to room temperature;(2) the residence time was reduced by 10 times;(3) the yield was greatly improved, that is, several arylboronates were successfully obtained with higher yield compared to traditional batch process. Therefore, it can be envisioned that a novel, simplified flow synthetic protocol will be developed toward green organic synthesis via MFCs.
基金supported by the Shanghai Municipal Science and Technology Major Project (“Beyond Limits manufacture”)。
文摘Recent developments in the utilization of microfluidic chips(MFCs) have shown their potential utility in multiphase organic synthesis by enabling efficient organic reactions in flow chemistry. However, MFCs technology has been wandering in the laboratory of small dose synthetic routes, which is limited to the level of "tiny" fluid flux. To address this issue, we herein report the first case of the chips with highthroughput 3D channels produced by femtosecond laser being used to create a time-saving, cost-effective and risk-free approach suitable for large-scale flow synthesis. Several multiphase reactions have been successfully prepared on demand in our designed flow synthesis system containing 3D MFCs: 1) benzyl alcohol was converted to benzaldehyde in 3 min with a yield of 97.50% by liquid-liquid two-phase transfer catalytic oxidation;2) organozinc reagents and α-cyano carbonyl carbon compounds were synthesized by solid-liquid two-phase metal insertion reaction in 7 min, and the yield was up to 100%;3) benzoic acid was synthesized by gas-liquid two-phase carboxylation reaction in 2.8 s with a yield of 96%. Significant gains in production rate result from the effective scaling of flow reactors from microliters per hour in MFCs to intermediate milliliters per minute without affecting mass transport performance. Meanwhile,our 3D MFCs show excellent mass and heat transfer efficiency in large-scale industrial units, breaking through the bottleneck in this field. As a result, it is possible to imagine the creation of a new, streamlined flow synthetic technique via MFCs for green multiphase organic synthesis.
基金This work was sponsored by the National Nature Science Foundation of China(No.U1609207)the National Key Research and Development Program of China(2018YFA0703000)the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(No.51521064).
文摘Biomedical field has been seeking a feasible standard drug screening system consisting of 3D tumor model array for drug researching due to providing sufficient samples and simulating actual in vivo tumor growth situation,which is still a challenge to rapidly and uniformly establish though.Here,we propose a novel drug screening system,namely 3D tumor array chip with“layer cake”structure,for drug screening.Accurate gelatin methacryloyl hydrogel droplets(~0.1μL)containing tumor cells can be automatically deposited on demand with electrohydrodynamic 3D printing.Transparent conductive membrane is introduced as a chip basement for preventing charges accumulation during fabricating and convenient observing during screening.Culturing chambers formed by stainless steel and silicon interlayer is convenient to be assembled and recycled.As this chip is compatible with the existing 96-well culturing plate,the drug screening protocols could keep the same as convention.Important properties of this chip,namely printing stability,customizability,accuracy,microenvironment,tumor functionalization,are detailly examined.As a demonstration,it is applied for screening of epirubicin and paclitaxel with breast tumor cells to confirm the compatibility of the proposed screening system with the traditional screening methods.We believe this chip will potentially play a significant role in drug evaluation in the future.
基金supported by the National Natural Science Foundation of China(No.22278087)。
文摘Calcium dibutyryladenosine cyclophosphate is a widely used cardiovascular drug.The traditional batch synthesis process suffers from long reaction times,tedious operations,and unstable yields.Herein,a sequential continuous flow synthesis combined with a multistage in-line purification process of calcium dibutyryladenosine cyclophosphate was developed.The acylation reaction was completed in a continuous coil reactor at 160℃in 20 min.And the high toxic solvent pyridine was replaced by acetonitrile.Furthermore,the multistage in-line purification process was integrated into the homemade 3D circular cyclone-type micromixer chip.Combining with the membrane phase separators,the residence time of the purification step was 30 s.The isolated yield of this sequential continuous process was 92%with 99%purity.
基金This work was supported by JSPS KAKENHI Grant Number 25286038.
文摘The high-precision integration of three-dimensional(3D)microoptical components into microfluidics in a customizable manner is crucial for optical sensing,fluorescence analysis,and cell detection in optofluidic applications;however,it remains challenging for current microfabrication technologies.This paper reports the in-channel integration of flexible two-dimensional(2D)and 3D polymer microoptical devices into glass microfluidics by developing a novel technique:flat scaffold-supported hybrid femtosecond laser microfabrication(FSS-HFLM).The scaffold with an optimal thickness of 1–5 μm is fabricated on the lower internal surface of a microfluidic channel to improve the integration of high-precision microoptical devices on the scaffold by eliminating any undulated internal channel surface caused by wet etching.As a proof of demonstration,two types of typical microoptical devices,namely,2D Fresnel zone plates(FZPs)and 3D refractive microlens arrays(MLAs),are integrated.These devices exhibit multicolor focal spots,elongated(>three times)focal length and imaging of the characters‘RIKEN’in a liquid channel.The resulting optofluidic chips are further used for coupling-free white-light cell counting with a success rate as high as 93%.An optofluidic system with two MLAs and a W-filter is also designed and fabricated for more advanced cell filtering/counting applications.
