The central solenoid（CS）is one of the key components of the International Thermonuclear Experimental Reactor（ITER）tokamak and which is often considered as the heart of this fusion reactor.This solenoid will be bui...The central solenoid（CS）is one of the key components of the International Thermonuclear Experimental Reactor（ITER）tokamak and which is often considered as the heart of this fusion reactor.This solenoid will be built by using Nb3Sn cablein-conduit conductors（CICC）,capable of generating a 13 T magnetic field.In order to assess the performance of the Nb3Sn CICC in nearly the ITER condition,many short samples have been evaluated at the SULTAN test facility（the background magnetic field is of 10.85 T with the uniform length of 400 mm at 1%homogeneity）in Centre de Recherches en Physique des Plasma（CRPP）.It is found that the samples with pseudo-long twist pitch（including baseline specimens）show a significant degradation in the current-sharing temperature（Tcs）,while the qualification tests of all short twist pitch（STP）samples,which show no degradation versus electromagnetic cycling,even exhibits an increase of Tcs.This behavior was perfectly reproduced in the coil experiments at the central solenoid model coil（CSMC）facility last year.In this paper,the complex structure of the Nb3Sn CICC would be simplified into a wire rope consisting of six petals and a cooling spiral.An analytical formula for the Tcs behavior as a function of the axial strain of the cable is presented.Based on this,the effects of twist pitch,axial and transverse stiffness,thermal mismatch,cycling number,magnetic distribution,etc.,on the axial strain are discussed systematically.The calculated Tcs behavior with cycle number show consistency with the previous experimental results qualitatively and quantitatively.Lastly,we focus on the relationship between Tcs and axial strain of the cable,and we conclude that the Tcs behavior caused by electromagnetic cycles is determined by the cable axial strain.Once the cable is in a compression situation,this compression strain and its accumulation would lead to the Tcs degradation.The experimental observation of the Tcs enhancement in the CS STP samples should be considered as a contribution of the shorter length of the high field zone in SULTAN and CSMC devices,as well as the tight cable structure.展开更多
Holistic tin-plating on the outer conductor is one of the key processes in the manufacture of semi-flexible coaxial cable, which is widely applied to the third generation (3G) mobile communication system. However, in ...Holistic tin-plating on the outer conductor is one of the key processes in the manufacture of semi-flexible coaxial cable, which is widely applied to the third generation (3G) mobile communication system. However, in the traditional horizontal tin-plating process, disadvantages such as the pinhole defects and low productivity effect cannot be avoided. In this paper, a vertical tin-plating process was proposed to reduce the pinhole defects and improve the tincoating quality. Compared with the traditional horizontal tin-plating process, the immersion length was reduced from 300-400 mm to 10-100 mm and the tin-plating time was reduced from 7 s to 3 s in the proposed method. The experimental results indicate that immersion length and time are key parameters for the tin-plating quality. With this new tin-plating process, the experimental results show that the pinhole defects can be eliminated effectively by controlling the immersion depth below 100 mm and tin-plating time at 3 s. The thickness of tin-coating increased from not more than 5 μm to 12.3 μm with the proposed vertical tin-plating process. Meanwhile, the thickness of the intermetallic compounds (IMCs) layer between the tin-coating and copper wires was reduced from 3.26 μm to 0.62 μm if the immersion time decreased from 30 s to 1 s. Besides, a self-developed flux, which possesses a boiling point or decomposed temperature of active components over 300℃, exhibits a better efficiency in reducing the pinhole formation.展开更多
The analysis of the impulse voltage on the internal electric field of the cable joint plays a key role in studying the breakdown of the joint. Based on the finite element method, a three-dimensional electromagnetic fi...The analysis of the impulse voltage on the internal electric field of the cable joint plays a key role in studying the breakdown of the joint. Based on the finite element method, a three-dimensional electromagnetic field simulation model of the cable joint is established in this paper. Simulation results show that the voltage at the head of the cable joint reaches about twice the impulse voltage. The increase of the conductivity of semi-conductive material also leads to the increase of electric field intensity. Then, several points and curves at different positions are selected for further analysis in this paper. Among them, the electric field distortion at the edge of the high voltage shield is the most serious and the electric field in the air gap is the least.展开更多
In recent years, significant advancements have been made in deep-sea broadband seismic acquisition and its support data processing technologies. Compared with traditional constant-depth flat-cable acquisition, variabl...In recent years, significant advancements have been made in deep-sea broadband seismic acquisition and its support data processing technologies. Compared with traditional constant-depth flat-cable acquisition, variable-depth cable acquisition significantly differentiates frequency notches and enhances information complementarity between traces, effectively broadening the frequency band of acquired seismic data. Based on the international slanted cable technology, China has independently developed a plow-type cable seismic acquisition and imaging system: a combination of slanted and deep-deployed flat cables,along with a deghosting processing technique. This innovation optimizes the segmented depth variation of cables, further improving low-frequency response and broadening the high-frequency range. This paper extends the 2D technology into three dimensions, establishing an integrated technology system for deep-sea broadband, wide-azimuth seismic acquisition and imaging, consisting of three-ship and six-source acquisition equipments, 3D plow-type cable mat, blended acquisition design with rolling dual-random sources, and wavenumber-domain 3D deghosting techniques. Applications to two tectonic zones in the South China Sea demonstrate that the frequency band of seismic data is expanded from three octaves(8–85 Hz) by conventional acquisition and imaging methods to five octaves(2–130 Hz), significantly improving the data quality and imaging precision of deep structures. This advancement effectively supports the researches of fundamental geology, hydrocarbon accumulation,reservoir prediction, and fluid identification in deep-water basins. The successful deployment of these technologies has advanced China's deep-sea oil and gas exploration and has been generalized to more than ten international deep-sea oilfields.展开更多
基金supported by the National Natural Science Foundation of China(Grant 11622217)the National Key Project of Scientific Instrument and Equipment Development(Grant 11327802)supported by the Fundamental Research Funds for the Central Universities(Grants lzujbky-2017-ot18,lzujbky-2017-k18)
文摘The central solenoid（CS）is one of the key components of the International Thermonuclear Experimental Reactor（ITER）tokamak and which is often considered as the heart of this fusion reactor.This solenoid will be built by using Nb3Sn cablein-conduit conductors（CICC）,capable of generating a 13 T magnetic field.In order to assess the performance of the Nb3Sn CICC in nearly the ITER condition,many short samples have been evaluated at the SULTAN test facility（the background magnetic field is of 10.85 T with the uniform length of 400 mm at 1%homogeneity）in Centre de Recherches en Physique des Plasma（CRPP）.It is found that the samples with pseudo-long twist pitch（including baseline specimens）show a significant degradation in the current-sharing temperature（Tcs）,while the qualification tests of all short twist pitch（STP）samples,which show no degradation versus electromagnetic cycling,even exhibits an increase of Tcs.This behavior was perfectly reproduced in the coil experiments at the central solenoid model coil（CSMC）facility last year.In this paper,the complex structure of the Nb3Sn CICC would be simplified into a wire rope consisting of six petals and a cooling spiral.An analytical formula for the Tcs behavior as a function of the axial strain of the cable is presented.Based on this,the effects of twist pitch,axial and transverse stiffness,thermal mismatch,cycling number,magnetic distribution,etc.,on the axial strain are discussed systematically.The calculated Tcs behavior with cycle number show consistency with the previous experimental results qualitatively and quantitatively.Lastly,we focus on the relationship between Tcs and axial strain of the cable,and we conclude that the Tcs behavior caused by electromagnetic cycles is determined by the cable axial strain.Once the cable is in a compression situation,this compression strain and its accumulation would lead to the Tcs degradation.The experimental observation of the Tcs enhancement in the CS STP samples should be considered as a contribution of the shorter length of the high field zone in SULTAN and CSMC devices,as well as the tight cable structure.
基金Supported by Natural Science Foundation of China(51239008 51739010+4 种基金 5167922351878315 51508220 51809101)Jiangsu State Grid Science and Technology Project(FW201804007)~~
基金Supported by Science and Technology Support Project of Tianjin Science and Technology Commission (No.10ZCKFGX3500)
文摘Holistic tin-plating on the outer conductor is one of the key processes in the manufacture of semi-flexible coaxial cable, which is widely applied to the third generation (3G) mobile communication system. However, in the traditional horizontal tin-plating process, disadvantages such as the pinhole defects and low productivity effect cannot be avoided. In this paper, a vertical tin-plating process was proposed to reduce the pinhole defects and improve the tincoating quality. Compared with the traditional horizontal tin-plating process, the immersion length was reduced from 300-400 mm to 10-100 mm and the tin-plating time was reduced from 7 s to 3 s in the proposed method. The experimental results indicate that immersion length and time are key parameters for the tin-plating quality. With this new tin-plating process, the experimental results show that the pinhole defects can be eliminated effectively by controlling the immersion depth below 100 mm and tin-plating time at 3 s. The thickness of tin-coating increased from not more than 5 μm to 12.3 μm with the proposed vertical tin-plating process. Meanwhile, the thickness of the intermetallic compounds (IMCs) layer between the tin-coating and copper wires was reduced from 3.26 μm to 0.62 μm if the immersion time decreased from 30 s to 1 s. Besides, a self-developed flux, which possesses a boiling point or decomposed temperature of active components over 300℃, exhibits a better efficiency in reducing the pinhole formation.
文摘The analysis of the impulse voltage on the internal electric field of the cable joint plays a key role in studying the breakdown of the joint. Based on the finite element method, a three-dimensional electromagnetic field simulation model of the cable joint is established in this paper. Simulation results show that the voltage at the head of the cable joint reaches about twice the impulse voltage. The increase of the conductivity of semi-conductive material also leads to the increase of electric field intensity. Then, several points and curves at different positions are selected for further analysis in this paper. Among them, the electric field distortion at the edge of the high voltage shield is the most serious and the electric field in the air gap is the least.
基金supported jointly by National Major Science and Technology Project of China (Grant No. 2016ZX05026001)Major Projects for the 14th Five-Year Plan of National Laboratory for Marine Science and Technology (Qingdao) (Grant No. 2021QNLM020001)。
文摘In recent years, significant advancements have been made in deep-sea broadband seismic acquisition and its support data processing technologies. Compared with traditional constant-depth flat-cable acquisition, variable-depth cable acquisition significantly differentiates frequency notches and enhances information complementarity between traces, effectively broadening the frequency band of acquired seismic data. Based on the international slanted cable technology, China has independently developed a plow-type cable seismic acquisition and imaging system: a combination of slanted and deep-deployed flat cables,along with a deghosting processing technique. This innovation optimizes the segmented depth variation of cables, further improving low-frequency response and broadening the high-frequency range. This paper extends the 2D technology into three dimensions, establishing an integrated technology system for deep-sea broadband, wide-azimuth seismic acquisition and imaging, consisting of three-ship and six-source acquisition equipments, 3D plow-type cable mat, blended acquisition design with rolling dual-random sources, and wavenumber-domain 3D deghosting techniques. Applications to two tectonic zones in the South China Sea demonstrate that the frequency band of seismic data is expanded from three octaves(8–85 Hz) by conventional acquisition and imaging methods to five octaves(2–130 Hz), significantly improving the data quality and imaging precision of deep structures. This advancement effectively supports the researches of fundamental geology, hydrocarbon accumulation,reservoir prediction, and fluid identification in deep-water basins. The successful deployment of these technologies has advanced China's deep-sea oil and gas exploration and has been generalized to more than ten international deep-sea oilfields.
