Based on nominal model, a novel global sliding mode controller （GSMC） with a new control scheme is proposed for a practical uncertain servo system. This control scheme consists of two combined controllers, One is th...Based on nominal model, a novel global sliding mode controller （GSMC） with a new control scheme is proposed for a practical uncertain servo system. This control scheme consists of two combined controllers, One is the global sliding mode controller for practical plant, the other is the integral backstepping controller for nominal model. Modeling error between practical plant and nominal model is used to design GSMC. The steady-state control accuracy can be guaranteed by the integral backstepping control law, and the global robustness can be obtained by GSMC. The stability of the proposed controller is proved according to the Lyapunov approach. The simulation results both of sine signal and step signal tracking for 3-axis flight table are investigated to show good position tracking performance and high robustness with respect to large and parameter changes over all the response time.展开更多
Aircraft digital flexible assembly fixture and technologies are widely used in developed countries, while the traditional jig-based assembly mode is still used in China. The application study of aircraft digital flexi...Aircraft digital flexible assembly fixture and technologies are widely used in developed countries, while the traditional jig-based assembly mode is still used in China. The application study of aircraft digital flexible assembly system is just beginning in our country recently. To meet the requirements of automated posture alignment and join in digital assembly system for large aircraft components, a novel fitting fixture called 3-axis actuator is developed. On the basis of the actuators, three kinds of posture alignment system for large aircraft components are proposed, including the non-redundant system, the redundant actuating system, and the redundant leg system, and their constitutions and properties are introduced. Through deriving the feeding transmission stiffness model of single actuator and analyzing the inverse kinematics of these systems, the relationship between the external force and the changes of position and orientation of large aircraft component is obtained, and then the postural alignment stiffness models are established. With the method mentioned above, the postural alignment stiffness of three systems is computed by using the algebraic formulate, and the results show that redundant properties can increase system＇s postural alignment stiffness. As an example, a optimized layout of the assembly system for a given model of aircraft is developed, the results of application show that the layout has many advantages, such as high accuracy, stiffness, stability, reliability, efficiency and flexible, which can satisfy the requirement of aircraft digital assembly system well. The proposed study of postural alignment stiffness for different systems can supply the theoretic support for the optimization layout design of aircraft digital assembly system, and contribute to evaluate the system working performance of systems.展开更多
The 3-axis flight table is an important device and a typical high performanceposition and speed servo system used in the hardware-in-the-loop simulation of flight controlsystem. Friction force and uncertainty are the ...The 3-axis flight table is an important device and a typical high performanceposition and speed servo system used in the hardware-in-the-loop simulation of flight controlsystem. Friction force and uncertainty are the main characteristics in the 3-axis flight table servosystem. Based on the description of dynamic and static model of a nonlinear Stribeck frictionmodel, and taking account of the practical uncertainties of 3-axis flight table servo system, theQFT controller is designed. Simulation and realtime results are presented.展开更多
Identification of magnitude and orientation for spatially applied loading is highly desired in the fields of not only the machinery components but also human-machine interaction.Despite the fact that the 3-axis force ...Identification of magnitude and orientation for spatially applied loading is highly desired in the fields of not only the machinery components but also human-machine interaction.Despite the fact that the 3-axis force sensor with different structures has been proposed to measure the spatial force,there are still some common limitations including the multi-step manufacturing-assembly processes and complicated testing of decoupling calibration.Here,we propose a rapid fabrication strategy with low-cost to achieve high-precision 3-axis force sensors.The sensor is designed to compose of structural Maltese cross base and sensing units.It is directly fabricated within one step by a hybrid 3D printing technology combining deposition modeling(FDM)with direct-ink-writing(DIW).In particular,a machine learning(ML)model is used to convert the strain signal to the force components.Instead of a mount of calibration tests,this ML model is trained by sufficient simulation data based on programmed batch finite element modeling.This sensor is capable of continuously identifying a spatial force with varying magnitude and orientation,which successfully quantify the applied force of traditional Chinese medicine physiotherapy including Gua Sha and massage.This work provides insight for design and rapid fabrication of multi-axis force sensors,as well as potential applications.展开更多
This paper describes a wood-wood spatial joining system adapted to digital fabrication which has been designated the“Spatial Masterkey”.The wood stereotomy of the joints between the different pieces that make up thi...This paper describes a wood-wood spatial joining system adapted to digital fabrication which has been designated the“Spatial Masterkey”.The wood stereotomy of the joints between the different pieces that make up this joining system is inspired by a three-dimensional puzzle called“snowflake”.The production process used in the masterkey system can be carried out using only a 3-axis CNC milling machine—a relatively affordable and easily accessible tool.By using digital manufacturing for the execution of wood-wood joints,several benefits are obtained including faster machining and greater cutting precision and uniformity in the products produced.These advantages make this joining system both economically competitive and environmentally friendly.Additionally,the versatility of this joining system means that its configuration can be adapted to a wide range of casuistry of encounters between members,which means that it can be used for a number of spatial assemblies.This includes,but is not limited to,the spatial module presented in this document.展开更多
文摘Based on nominal model, a novel global sliding mode controller （GSMC） with a new control scheme is proposed for a practical uncertain servo system. This control scheme consists of two combined controllers, One is the global sliding mode controller for practical plant, the other is the integral backstepping controller for nominal model. Modeling error between practical plant and nominal model is used to design GSMC. The steady-state control accuracy can be guaranteed by the integral backstepping control law, and the global robustness can be obtained by GSMC. The stability of the proposed controller is proved according to the Lyapunov approach. The simulation results both of sine signal and step signal tracking for 3-axis flight table are investigated to show good position tracking performance and high robustness with respect to large and parameter changes over all the response time.
文摘Aircraft digital flexible assembly fixture and technologies are widely used in developed countries, while the traditional jig-based assembly mode is still used in China. The application study of aircraft digital flexible assembly system is just beginning in our country recently. To meet the requirements of automated posture alignment and join in digital assembly system for large aircraft components, a novel fitting fixture called 3-axis actuator is developed. On the basis of the actuators, three kinds of posture alignment system for large aircraft components are proposed, including the non-redundant system, the redundant actuating system, and the redundant leg system, and their constitutions and properties are introduced. Through deriving the feeding transmission stiffness model of single actuator and analyzing the inverse kinematics of these systems, the relationship between the external force and the changes of position and orientation of large aircraft component is obtained, and then the postural alignment stiffness models are established. With the method mentioned above, the postural alignment stiffness of three systems is computed by using the algebraic formulate, and the results show that redundant properties can increase system＇s postural alignment stiffness. As an example, a optimized layout of the assembly system for a given model of aircraft is developed, the results of application show that the layout has many advantages, such as high accuracy, stiffness, stability, reliability, efficiency and flexible, which can satisfy the requirement of aircraft digital assembly system well. The proposed study of postural alignment stiffness for different systems can supply the theoretic support for the optimization layout design of aircraft digital assembly system, and contribute to evaluate the system working performance of systems.
文摘The 3-axis flight table is an important device and a typical high performanceposition and speed servo system used in the hardware-in-the-loop simulation of flight controlsystem. Friction force and uncertainty are the main characteristics in the 3-axis flight table servosystem. Based on the description of dynamic and static model of a nonlinear Stribeck frictionmodel, and taking account of the practical uncertainties of 3-axis flight table servo system, theQFT controller is designed. Simulation and realtime results are presented.
基金supported by the National Natural Science Foundation of China [12372078]Sixth Phase of Jiangsu Province"333 High Level Talent Training Project"Second Level Talents State Key Laboratory of Mechanics and Control of Mechanical Structures (Nanjing University of Aeronautics and astronautics [MCMS-E-0422G04].
文摘Identification of magnitude and orientation for spatially applied loading is highly desired in the fields of not only the machinery components but also human-machine interaction.Despite the fact that the 3-axis force sensor with different structures has been proposed to measure the spatial force,there are still some common limitations including the multi-step manufacturing-assembly processes and complicated testing of decoupling calibration.Here,we propose a rapid fabrication strategy with low-cost to achieve high-precision 3-axis force sensors.The sensor is designed to compose of structural Maltese cross base and sensing units.It is directly fabricated within one step by a hybrid 3D printing technology combining deposition modeling(FDM)with direct-ink-writing(DIW).In particular,a machine learning(ML)model is used to convert the strain signal to the force components.Instead of a mount of calibration tests,this ML model is trained by sufficient simulation data based on programmed batch finite element modeling.This sensor is capable of continuously identifying a spatial force with varying magnitude and orientation,which successfully quantify the applied force of traditional Chinese medicine physiotherapy including Gua Sha and massage.This work provides insight for design and rapid fabrication of multi-axis force sensors,as well as potential applications.
基金The authors received financial support from the Department of Architecture of the University of the Basque Country UPV/EHU for the translation of this article.
文摘This paper describes a wood-wood spatial joining system adapted to digital fabrication which has been designated the“Spatial Masterkey”.The wood stereotomy of the joints between the different pieces that make up this joining system is inspired by a three-dimensional puzzle called“snowflake”.The production process used in the masterkey system can be carried out using only a 3-axis CNC milling machine—a relatively affordable and easily accessible tool.By using digital manufacturing for the execution of wood-wood joints,several benefits are obtained including faster machining and greater cutting precision and uniformity in the products produced.These advantages make this joining system both economically competitive and environmentally friendly.Additionally,the versatility of this joining system means that its configuration can be adapted to a wide range of casuistry of encounters between members,which means that it can be used for a number of spatial assemblies.This includes,but is not limited to,the spatial module presented in this document.
