Currently, 3D printing of the character dolls is a very practical application for the average person. But the model of doll which can be obtained is static so the posture of the doll is single. On the other hand, the ...Currently, 3D printing of the character dolls is a very practical application for the average person. But the model of doll which can be obtained is static so the posture of the doll is single. On the other hand, the modification of the model is very difficult to non-professions. This paper proposes an rapid generation method of character doll with rotatable limbs, which is through adding the sphere joint to the doll＇s model automatically. After the model is segmented by drawing a line interactively, the sphere joint is created based on the segmentation boundary through entity modeling method. Lastly the two models of the doll and the joint are composited and printed. Some doll＇s model are tested on the FDM（Fused Deposition Modeling） 3D printer using this process. The results are more interesting and the efficiency has been greatly improved compared with modifying the model manually.展开更多
The shift towards sustainability in the fashion industry has become an urgent necessity and a national duty, where the life cycle of garments poses a negative impact on the environment, which increases strongly with t...The shift towards sustainability in the fashion industry has become an urgent necessity and a national duty, where the life cycle of garments poses a negative impact on the environment, which increases strongly with the huge increase in the daily consumption of garments and fast fashion. One of the most prominent solutions that have been proposed is to change the manufacturing system in a way that would help reduce costs, reduce supply and provide products that are more closely related to the individual customer need. Accessories such as (closers) are an important part of the fashion industry, and therefore, this study aimed to produce closers using (FDM) technology, which is one of the least expensive and most widespread 3D printing technologies. These closers are then tested in the laboratory according to AATCC standard specifications for garments and closers to ensure the applicability of this technology in the implementation of closers for designers and manufacturers in medium and small facilities. This study relied on the experimental exploratory approach, and the results proved the success of the proposed closers, as the implemented models passed the standard tests with distinction.展开更多
目的探索根据骨折患者的cT数据应用3D打印机制作个体化眼眶模型的方法。方法将患者眼眶CT的医学数字成像和通信格式（digital imaging and communications in medicine，DICOM）影像数据通过交互式医学图像控制系统（materialise’s int...目的探索根据骨折患者的cT数据应用3D打印机制作个体化眼眶模型的方法。方法将患者眼眶CT的医学数字成像和通信格式（digital imaging and communications in medicine，DICOM）影像数据通过交互式医学图像控制系统（materialise’s interactive medical image control system，mimics）软件三维重建，生成3D模型文件格式（STL）文件，通过开源三维打印程序（ReplicatorG）软件将STL文件转化成X3g文件，最后X3g文件通过3D打印机（Maker Bot Replicator2）等比例打印出三维立体眼眶模型。结果根据每个眼眶骨折患者的CT影像DICOM数据成功打印出个体化等比例眼眶骨折的三维实体模型。结论基于mimics软件、ReplicatorG软件及3D打印机制作的等比例眼眶实体三维模型，使临床医生能够更加充分地了解骨折的形态、面积及其与周围骨骼的三维结构关系。展开更多
The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specim...The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method.The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament.It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens.Time to ignition was found to be much longer in the 3D-printed PLA specimens.Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens,the duration of HRR was longer for the wood/PLA specimens.The initial mass of the specimens was smaller in the wood/PLA composites,but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.展开更多
The art of weaving is an ancient and beautiful technique that never fades. Various weaving techniques and various totem patterns contain rich cultural connotations. The development of cultural and creative industries ...The art of weaving is an ancient and beautiful technique that never fades. Various weaving techniques and various totem patterns contain rich cultural connotations. The development of cultural and creative industries often uses existing environmental materials to deconstruct and use them in innovative ways to reinspire and present another style. With the rapid progress of computer-aided design technology, digital applications in the design practice has become an important element, and parametric design is the best popular design method in recent years. This paper is mainly in view of the weaving crafts in the traditional culture of the world occupies an important role, and the precious traditional weaving crafts gradually lost. Therefore, it is planned to construct a 3D model with knitting characteristics through a parametric design method, and print out the prototype through the 3D printing mechanism, that is, the traditional craftsmanship is integrated into the modern manufacturing process with innovative techniques, to show the new style of this weaving craft culture that is different from the past, so that it not only retain its inherent spirit, but also can promote this ideal of cultural creativity.展开更多
Visualization experiments were conducted to clarify the operational characteristics of a polymer pulsating heat pipe(PHP).Hydrofluoroether(HFE)-7100 was used as a working fluid,and its filling ratio was 50%of the enti...Visualization experiments were conducted to clarify the operational characteristics of a polymer pulsating heat pipe(PHP).Hydrofluoroether(HFE)-7100 was used as a working fluid,and its filling ratio was 50%of the entire PHP channel.A semi-transparent PHP was fabricated using a transparent polycarbonate sheet and a plastic 3D printer,and the movements of liquid slugs and vapor plugs of the working fluid were captured with a high-speed camera.The video images were then analyzed to obtain the flow patterns in the PHP.The heat transfer characteristics of the PHPwere discussed based on the flowpatterns and temperature distributions obtainedwith thermocouples.Before starting heating,because of high wettability,large liquid slugs positioned at the evaporator section of the PHP.After starting heating,since the occurrence of boiling divided the large liquid slugs,oscillatory flowof smaller liquid slugs and vapor plugs was found in the PHP.Clear circulation flow of liquid slugs and vapor plugs was observed when the power input to the PHP was larger than 12.0 W.The flow patterns and temperature distributions confirmed that the circulation flow enhanced the heat transfer from the evaporator section to the condenser section of the PHP.In the circulation flow mode,large growth and contraction of vapor plugs were found one after another in all even-numbered PHP channels.However,the analysis of flow patterns clarified that the phase-change heat transfer rate by large growth and contraction of vapor plugs was 19%of the total heat transfer rate of the PHP.Although the generation of large vapor plugs was found in the PHP,most of the heat was transferred by the sensible heat of the working fluid.展开更多
A submergible robot model has been presented, and for 3D printing measures, their parts have been modified enough. It has been shown in our design that using printable connectors—a few engines and weight arrangements...A submergible robot model has been presented, and for 3D printing measures, their parts have been modified enough. It has been shown in our design that using printable connectors—a few engines and weight arrangements can be carried out, permitting distinctive moving prospects. After presenting our configuration and delineating a bunch of potential structures, a helpful model dependent on open-source equipment and programming arrangements has been presented conditionally. The model can be effectively tried in a few makes-a plunge streams and lakes throughout the planet. The unwavering quality of the printed models can be strained distinctly in generally shallow waters. Nonetheless, we accept that their accessibility will inspire the overall population to construct and test submerged robots, subsequently accelerating the improvement of imaginative arrangements and applications.展开更多
The objective of the work is to determine the influence of the PLA melting temperature during 3D printing on the dimensional accuracy of the model parts. Two modular drilling devices were also made using PLA model par...The objective of the work is to determine the influence of the PLA melting temperature during 3D printing on the dimensional accuracy of the model parts. Two modular drilling devices were also made using PLA model parts. The model parts were 3D printed using FDM technology and the ZMorph 2.0 hybrid 3D printer. The accuracy of 3D printing of the model part influences the realization of modular devices. In recent years, technology has evolved a lot, and the need to have the most efficient manufacturing equipment has increased. This is the reason for the development of 3D printers using FDM technology for plastic parts. The software used by these 3D printers used in FDM technology is very sophisticated, as they allow the manufacture of very precise 3D prototypes, identical to the designed 3D model, through modern additive manufacturing techniques. The quality and mechanical strength of the prototypes obtained using 3D printers is very good. The materials used by the 3D printers manufactured by FDM are cheap and accessible. These 3D printers are used to make three-dimensional objects (gears, flanges, bearings, covers, casings, mechanisms, figurines, interior and exterior design elements, architectural models, medical models).展开更多
基金Supported by National Natural Science Foundation of China(No.61305093)Anhui Department of Education Natural Science Research Major Project(No.KJ2013ZD02)
文摘Currently, 3D printing of the character dolls is a very practical application for the average person. But the model of doll which can be obtained is static so the posture of the doll is single. On the other hand, the modification of the model is very difficult to non-professions. This paper proposes an rapid generation method of character doll with rotatable limbs, which is through adding the sphere joint to the doll＇s model automatically. After the model is segmented by drawing a line interactively, the sphere joint is created based on the segmentation boundary through entity modeling method. Lastly the two models of the doll and the joint are composited and printed. Some doll＇s model are tested on the FDM（Fused Deposition Modeling） 3D printer using this process. The results are more interesting and the efficiency has been greatly improved compared with modifying the model manually.
文摘The shift towards sustainability in the fashion industry has become an urgent necessity and a national duty, where the life cycle of garments poses a negative impact on the environment, which increases strongly with the huge increase in the daily consumption of garments and fast fashion. One of the most prominent solutions that have been proposed is to change the manufacturing system in a way that would help reduce costs, reduce supply and provide products that are more closely related to the individual customer need. Accessories such as (closers) are an important part of the fashion industry, and therefore, this study aimed to produce closers using (FDM) technology, which is one of the least expensive and most widespread 3D printing technologies. These closers are then tested in the laboratory according to AATCC standard specifications for garments and closers to ensure the applicability of this technology in the implementation of closers for designers and manufacturers in medium and small facilities. This study relied on the experimental exploratory approach, and the results proved the success of the proposed closers, as the implemented models passed the standard tests with distinction.
文摘目的探索根据骨折患者的cT数据应用3D打印机制作个体化眼眶模型的方法。方法将患者眼眶CT的医学数字成像和通信格式（digital imaging and communications in medicine，DICOM）影像数据通过交互式医学图像控制系统（materialise’s interactive medical image control system，mimics）软件三维重建，生成3D模型文件格式（STL）文件，通过开源三维打印程序（ReplicatorG）软件将STL文件转化成X3g文件，最后X3g文件通过3D打印机（Maker Bot Replicator2）等比例打印出三维立体眼眶模型。结果根据每个眼眶骨折患者的CT影像DICOM数据成功打印出个体化等比例眼眶骨折的三维实体模型。结论基于mimics软件、ReplicatorG软件及3D打印机制作的等比例眼眶实体三维模型，使临床医生能够更加充分地了解骨折的形态、面积及其与周围骨骼的三维结构关系。
基金would like to thank the Slovenian Research Agency for financial support within the scope of the program P4-0015,as well as BI-CN/18-20-016:Study on the functional properties and thermal safety performance of wood materials and adhesives for 3D printing technology.
文摘The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method.The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament.It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens.Time to ignition was found to be much longer in the 3D-printed PLA specimens.Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens,the duration of HRR was longer for the wood/PLA specimens.The initial mass of the specimens was smaller in the wood/PLA composites,but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.
文摘The art of weaving is an ancient and beautiful technique that never fades. Various weaving techniques and various totem patterns contain rich cultural connotations. The development of cultural and creative industries often uses existing environmental materials to deconstruct and use them in innovative ways to reinspire and present another style. With the rapid progress of computer-aided design technology, digital applications in the design practice has become an important element, and parametric design is the best popular design method in recent years. This paper is mainly in view of the weaving crafts in the traditional culture of the world occupies an important role, and the precious traditional weaving crafts gradually lost. Therefore, it is planned to construct a 3D model with knitting characteristics through a parametric design method, and print out the prototype through the 3D printing mechanism, that is, the traditional craftsmanship is integrated into the modern manufacturing process with innovative techniques, to show the new style of this weaving craft culture that is different from the past, so that it not only retain its inherent spirit, but also can promote this ideal of cultural creativity.
基金supported by JSPS KAKENHI Grant Number 22K03947.
文摘Visualization experiments were conducted to clarify the operational characteristics of a polymer pulsating heat pipe(PHP).Hydrofluoroether(HFE)-7100 was used as a working fluid,and its filling ratio was 50%of the entire PHP channel.A semi-transparent PHP was fabricated using a transparent polycarbonate sheet and a plastic 3D printer,and the movements of liquid slugs and vapor plugs of the working fluid were captured with a high-speed camera.The video images were then analyzed to obtain the flow patterns in the PHP.The heat transfer characteristics of the PHPwere discussed based on the flowpatterns and temperature distributions obtainedwith thermocouples.Before starting heating,because of high wettability,large liquid slugs positioned at the evaporator section of the PHP.After starting heating,since the occurrence of boiling divided the large liquid slugs,oscillatory flowof smaller liquid slugs and vapor plugs was found in the PHP.Clear circulation flow of liquid slugs and vapor plugs was observed when the power input to the PHP was larger than 12.0 W.The flow patterns and temperature distributions confirmed that the circulation flow enhanced the heat transfer from the evaporator section to the condenser section of the PHP.In the circulation flow mode,large growth and contraction of vapor plugs were found one after another in all even-numbered PHP channels.However,the analysis of flow patterns clarified that the phase-change heat transfer rate by large growth and contraction of vapor plugs was 19%of the total heat transfer rate of the PHP.Although the generation of large vapor plugs was found in the PHP,most of the heat was transferred by the sensible heat of the working fluid.
文摘A submergible robot model has been presented, and for 3D printing measures, their parts have been modified enough. It has been shown in our design that using printable connectors—a few engines and weight arrangements can be carried out, permitting distinctive moving prospects. After presenting our configuration and delineating a bunch of potential structures, a helpful model dependent on open-source equipment and programming arrangements has been presented conditionally. The model can be effectively tried in a few makes-a plunge streams and lakes throughout the planet. The unwavering quality of the printed models can be strained distinctly in generally shallow waters. Nonetheless, we accept that their accessibility will inspire the overall population to construct and test submerged robots, subsequently accelerating the improvement of imaginative arrangements and applications.
文摘The objective of the work is to determine the influence of the PLA melting temperature during 3D printing on the dimensional accuracy of the model parts. Two modular drilling devices were also made using PLA model parts. The model parts were 3D printed using FDM technology and the ZMorph 2.0 hybrid 3D printer. The accuracy of 3D printing of the model part influences the realization of modular devices. In recent years, technology has evolved a lot, and the need to have the most efficient manufacturing equipment has increased. This is the reason for the development of 3D printers using FDM technology for plastic parts. The software used by these 3D printers used in FDM technology is very sophisticated, as they allow the manufacture of very precise 3D prototypes, identical to the designed 3D model, through modern additive manufacturing techniques. The quality and mechanical strength of the prototypes obtained using 3D printers is very good. The materials used by the 3D printers manufactured by FDM are cheap and accessible. These 3D printers are used to make three-dimensional objects (gears, flanges, bearings, covers, casings, mechanisms, figurines, interior and exterior design elements, architectural models, medical models).
