以La_2O_3和Ce(NO_3)_3·6H_2O为原材料,以SDBS和CTAB为表面活性剂,采用水热合成法制备了La_2Ce_2O_7纳米晶体。通过XRD、Raman、SEM和TEM对粉体的物化性能进行了分析,讨论了不同表面活性剂对晶体生长活化能的影响。结果表明:添加...以La_2O_3和Ce(NO_3)_3·6H_2O为原材料,以SDBS和CTAB为表面活性剂,采用水热合成法制备了La_2Ce_2O_7纳米晶体。通过XRD、Raman、SEM和TEM对粉体的物化性能进行了分析,讨论了不同表面活性剂对晶体生长活化能的影响。结果表明:添加两种表面活性剂的样品均为萤石结构,以CTAB为表面活性剂的样品晶粒尺寸为11.4 nm,比表面积为187.53 m^2·g^(-1),其晶体生长活化能(16.33±0.02 k J·mol^(-1))要大于添加阴离子表面活性剂(SDBS)的样品(13.47±0.03 k J·mol^(-1))。展开更多
La_2Ce_2O_7 nanoparticles were prepared by citric acid complexation method followed by calcination at varied temperatures. Then, supported with 4 wt% Ru, they were evaluated as the catalysts for ammonia synthesis unde...La_2Ce_2O_7 nanoparticles were prepared by citric acid complexation method followed by calcination at varied temperatures. Then, supported with 4 wt% Ru, they were evaluated as the catalysts for ammonia synthesis under conditions similar with industry. With La_2Ce_2O_7 being calcinated at 700 or 800℃, the experimental results indicate that the Ru/La_2Ce_2O_7 catalyst exhibits much higher ammonia concentration or ammonia synthesis rate than that of Ru/CeO_2 and Ru/La_2O_3. In addition, Ru/La_2Ce_2O_7 possesses high stability under over-heating test. In the absence of any promotor, ammonia concentration of Ru/La_2Ce_2O_7 catalyst approaches 14% at 450℃, GHSV of 10000 h^(-1) and pressure of 10 MPa. The rate-determining step of ammonia synthesis, dissociation of N_2 is significantly facilitated by the strong metalesupport interaction(SMSI) between Ru and La_2Ce_2O_7. Due to the interaction, La_2Ce_2O_7 tends to donate electrons to Ru,resulting in the high electron density over the surface of Ru active sites which is favorable for the dissociation of N_2. Consequently, high activity is achieved.展开更多
La2Ce2O7 (LCO) is a promising candidate for thermal barrier coatings (TBCs) due to that it provides better thermal insulation than yttria-stabilized zirconia (YSZ) does. In this work, a TBC LCO was produced by solutio...La2Ce2O7 (LCO) is a promising candidate for thermal barrier coatings (TBCs) due to that it provides better thermal insulation than yttria-stabilized zirconia (YSZ) does. In this work, a TBC LCO was produced by solution precursor plasma spraying (SPPS). After the solution precursors were prepared and the spraying parameters were optimized, the thermophysical properties and thermal shock performance of the coatings were tested. It was found that the SPPS coating with segmentation crack density of 6 mm^-1 had the porosities of about 33.5% at spray distances of 35 mm. The thermal conductivity of the SPPS coatings is 0.50-0.75 W·m^-1·K^-1, much lower than that of the atmospheric plasma spraying (APS) coatings (0.85-1.25 W·m^-1·K^-1). The thermal shock performance of the SPPS coatings reached 60 cycles, much better than the APS coatings. This improvement is due to the segmentation cracks in the coatings, which can improve strain tolerance and effectively relieve internal stress. This study provides reference significance for further research on thermal barrier coatings.展开更多
Fine grains and slow grain growth rate are beneficial to preventing the thermal stress-induced cracking and thermal conductivity increase of thermal barrier coatings.Inspired by the sluggish diffusion effect of high-e...Fine grains and slow grain growth rate are beneficial to preventing the thermal stress-induced cracking and thermal conductivity increase of thermal barrier coatings.Inspired by the sluggish diffusion effect of high-entropy materials,a novel high-entropy(HE)rare-earth zirconate solid solution(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2 Zr2 O7 was designed and successfully synthesized in this work.The as-synthesized(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2 Zr2 O7 is phase-pure with homogeneous rare-earth element distribution.The thermal conductivity of as-synthesized(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2 Zr2 O7 at room temperature is as low as 0.76 W m^-1 K^-1.Moreover,after being heated at 1500℃for 1-18 h,the average grain size of(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2 Zr2 O7 only increases from 1.69μm to 3.92μm,while the average grain size of La2Zr2O7 increases from 1.96μm to 8.89μm.Low thermal conductivity and sluggish grain growth rate indicate that high-entropy(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 is suitable for application as a thermal barrier coating material and it may possess good thermal stress-induced cracking resistance.展开更多
文摘以La_2O_3和Ce(NO_3)_3·6H_2O为原材料,以SDBS和CTAB为表面活性剂,采用水热合成法制备了La_2Ce_2O_7纳米晶体。通过XRD、Raman、SEM和TEM对粉体的物化性能进行了分析,讨论了不同表面活性剂对晶体生长活化能的影响。结果表明:添加两种表面活性剂的样品均为萤石结构,以CTAB为表面活性剂的样品晶粒尺寸为11.4 nm,比表面积为187.53 m^2·g^(-1),其晶体生长活化能(16.33±0.02 k J·mol^(-1))要大于添加阴离子表面活性剂(SDBS)的样品(13.47±0.03 k J·mol^(-1))。
基金Project supported by National Natural Science Foundation of China(21776257)
文摘La_2Ce_2O_7 nanoparticles were prepared by citric acid complexation method followed by calcination at varied temperatures. Then, supported with 4 wt% Ru, they were evaluated as the catalysts for ammonia synthesis under conditions similar with industry. With La_2Ce_2O_7 being calcinated at 700 or 800℃, the experimental results indicate that the Ru/La_2Ce_2O_7 catalyst exhibits much higher ammonia concentration or ammonia synthesis rate than that of Ru/CeO_2 and Ru/La_2O_3. In addition, Ru/La_2Ce_2O_7 possesses high stability under over-heating test. In the absence of any promotor, ammonia concentration of Ru/La_2Ce_2O_7 catalyst approaches 14% at 450℃, GHSV of 10000 h^(-1) and pressure of 10 MPa. The rate-determining step of ammonia synthesis, dissociation of N_2 is significantly facilitated by the strong metalesupport interaction(SMSI) between Ru and La_2Ce_2O_7. Due to the interaction, La_2Ce_2O_7 tends to donate electrons to Ru,resulting in the high electron density over the surface of Ru active sites which is favorable for the dissociation of N_2. Consequently, high activity is achieved.
基金financially supported by the National Natural Science Foundation of China (Nos. 51571002 and 51401003)Beijing Municipal Natural Science Foundation(Nos. 2172008 and KZ201310005003)
文摘La2Ce2O7 (LCO) is a promising candidate for thermal barrier coatings (TBCs) due to that it provides better thermal insulation than yttria-stabilized zirconia (YSZ) does. In this work, a TBC LCO was produced by solution precursor plasma spraying (SPPS). After the solution precursors were prepared and the spraying parameters were optimized, the thermophysical properties and thermal shock performance of the coatings were tested. It was found that the SPPS coating with segmentation crack density of 6 mm^-1 had the porosities of about 33.5% at spray distances of 35 mm. The thermal conductivity of the SPPS coatings is 0.50-0.75 W·m^-1·K^-1, much lower than that of the atmospheric plasma spraying (APS) coatings (0.85-1.25 W·m^-1·K^-1). The thermal shock performance of the SPPS coatings reached 60 cycles, much better than the APS coatings. This improvement is due to the segmentation cracks in the coatings, which can improve strain tolerance and effectively relieve internal stress. This study provides reference significance for further research on thermal barrier coatings.
基金financially supported by the National Natural Science Foundation of China (Nos.51672064 and U1435206)
文摘Fine grains and slow grain growth rate are beneficial to preventing the thermal stress-induced cracking and thermal conductivity increase of thermal barrier coatings.Inspired by the sluggish diffusion effect of high-entropy materials,a novel high-entropy(HE)rare-earth zirconate solid solution(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2 Zr2 O7 was designed and successfully synthesized in this work.The as-synthesized(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2 Zr2 O7 is phase-pure with homogeneous rare-earth element distribution.The thermal conductivity of as-synthesized(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2 Zr2 O7 at room temperature is as low as 0.76 W m^-1 K^-1.Moreover,after being heated at 1500℃for 1-18 h,the average grain size of(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2 Zr2 O7 only increases from 1.69μm to 3.92μm,while the average grain size of La2Zr2O7 increases from 1.96μm to 8.89μm.Low thermal conductivity and sluggish grain growth rate indicate that high-entropy(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7 is suitable for application as a thermal barrier coating material and it may possess good thermal stress-induced cracking resistance.
