The microstructure and mechanical properties of 2524 Al alloy after quenching in liquid nitrogen(LN_(2))were investigated by TEM and compared with those of cold water quenching.The results show that the LN_(2) quenchi...The microstructure and mechanical properties of 2524 Al alloy after quenching in liquid nitrogen(LN_(2))were investigated by TEM and compared with those of cold water quenching.The results show that the LN_(2) quenching process effectively induces the formation of dislocation loops.These loops become large and unevenly distribute after aging for 15 min.Furthermore,such loops become rapidly immobilized by the precipitation of coarse S phases after 1 h aging.The alloy quenched in LN_(2) demonstrates superior peak hardness and displays a more rapid response to subsequent aging treatments compared with the cold water-quenched one.Despite the short aging time,LN_(2)-quenched sample achieves tensile strength of 488 MPa.This enhanced strength is attributed to the strengthening effect of numerous finely dispersed Guinier-Preston-Bagaryatsky(GPB)zones,in conjunction with the inhomogeneous formation of S phase on the dislocation loops.展开更多
Low frequency electromagnetic casting （LFEC） process with the application of an induction coil outside the conventional direct chill （DC） casting mould was used to prepare the flat ingot of 2524 alloy and the effe...Low frequency electromagnetic casting （LFEC） process with the application of an induction coil outside the conventional direct chill （DC） casting mould was used to prepare the flat ingot of 2524 alloy and the effect of electromagnetic field on the microstructure and macrosegregation of this alloy was systematically studied. The results show that the fiat ingot prepared by the LFEC process has a finer and more uniform as-cast microstructure and the grain morphology is transformed from dendrite and rosette-like to equiaxed structure. The LFEC process also shows a significant effect on macrosegregation, and with the application of electromagnetic field during casting process, the segregation in the centre of the ingot is obviously reduced. The mechanism of these effects was also discussed.展开更多
The effects of pre-stretching following solution treatment on the hardness and microstructures of aged 2524 aluminium alloy at 170 ℃ were studied.Ageing hardness values under different pre-stretching conditions were ...The effects of pre-stretching following solution treatment on the hardness and microstructures of aged 2524 aluminium alloy at 170 ℃ were studied.Ageing hardness values under different pre-stretching conditions were measured,and the corresponding microstructures were characterized by transmission electron microscopy（TEM）.The results show that compared with unstretched samples,the peak hardness is increased and the time to reach the peak hardness is reduced with the increase of pre-strain;the number density of S（Al2CuMg） phases is increased and the length is shortened in pre-stretched alloy.Additionally,the number density of GPB zones is decreased with the increase of pre-strain in peak-aged samples.When the pre-strain is up to 5%,S phases play the predominant contribution to the peak hardness.Fine and uniformly distributed S phases lead to a higher hardness than GPB zones together with S phases existing in conventionally aged 2524 alloy.展开更多
基金supported by the National Natural Science Foundation of China(No.52001106)the Natural Science Foundation of Hebei Province,China(No.E2022202158).
文摘The microstructure and mechanical properties of 2524 Al alloy after quenching in liquid nitrogen(LN_(2))were investigated by TEM and compared with those of cold water quenching.The results show that the LN_(2) quenching process effectively induces the formation of dislocation loops.These loops become large and unevenly distribute after aging for 15 min.Furthermore,such loops become rapidly immobilized by the precipitation of coarse S phases after 1 h aging.The alloy quenched in LN_(2) demonstrates superior peak hardness and displays a more rapid response to subsequent aging treatments compared with the cold water-quenched one.Despite the short aging time,LN_(2)-quenched sample achieves tensile strength of 488 MPa.This enhanced strength is attributed to the strengthening effect of numerous finely dispersed Guinier-Preston-Bagaryatsky(GPB)zones,in conjunction with the inhomogeneous formation of S phase on the dislocation loops.
基金Projects(51104043,51374067)supported by the National Natural Science Foundation of ChinaProject(2012CB619506)supported by the National Basic Research Program of ChinaProject(N120409002)supported by the Fundamental Research Funds for the Central Universities,China
文摘Low frequency electromagnetic casting （LFEC） process with the application of an induction coil outside the conventional direct chill （DC） casting mould was used to prepare the flat ingot of 2524 alloy and the effect of electromagnetic field on the microstructure and macrosegregation of this alloy was systematically studied. The results show that the fiat ingot prepared by the LFEC process has a finer and more uniform as-cast microstructure and the grain morphology is transformed from dendrite and rosette-like to equiaxed structure. The LFEC process also shows a significant effect on macrosegregation, and with the application of electromagnetic field during casting process, the segregation in the centre of the ingot is obviously reduced. The mechanism of these effects was also discussed.
基金Project(51001022) supported by the National Natural Science Foundation of ChinaProject supported by Innovative Research Team in University of Liaoning Province,China
文摘The effects of pre-stretching following solution treatment on the hardness and microstructures of aged 2524 aluminium alloy at 170 ℃ were studied.Ageing hardness values under different pre-stretching conditions were measured,and the corresponding microstructures were characterized by transmission electron microscopy（TEM）.The results show that compared with unstretched samples,the peak hardness is increased and the time to reach the peak hardness is reduced with the increase of pre-strain;the number density of S（Al2CuMg） phases is increased and the length is shortened in pre-stretched alloy.Additionally,the number density of GPB zones is decreased with the increase of pre-strain in peak-aged samples.When the pre-strain is up to 5%,S phases play the predominant contribution to the peak hardness.Fine and uniformly distributed S phases lead to a higher hardness than GPB zones together with S phases existing in conventionally aged 2524 alloy.
