B2-CuZr phase reinforced amorphous alloy matrix composites has become one of the research hotspots in the field of materials science due to the“transformation-induced plasticity”phenomenon,which makes the composites...B2-CuZr phase reinforced amorphous alloy matrix composites has become one of the research hotspots in the field of materials science due to the“transformation-induced plasticity”phenomenon,which makes the composites show better macroscopic plastic deformability and obvious work-hardening behavior compared to the conventional amorphous alloy matrix composites reinforced with ductile phases.However,the in-situ metastable B2-CuZr phase tends to undergo eutectoid decomposition during solidification,and the volume fraction,size,and distribution of B2-CuZr phase are difficult to control,which limits the development and application of these materials.To date,much efforts have been made to solve the above problems through composition optimization,casting parameter tailoring,and post-processing technique.In this study,a review was given based on relevant studies,focusing on the predictive approach,reinforcing mechanism,and microstructure tailoring methods of B2-CuZr phase reinforced amorphous alloy matrix composites.The research focus and future prospects were also given for the future development of the present composite system.展开更多
The crisis of excessive increase in CO_(2)emissions has quickly become a serious issue and requires low-cost and bio-compatible solutions.The employee of membrane technology for CO_(2)gas separation has garnered signi...The crisis of excessive increase in CO_(2)emissions has quickly become a serious issue and requires low-cost and bio-compatible solutions.The employee of membrane technology for CO_(2)gas separation has garnered significant interest among researchers.However,this method encounters challenges related to selectivity and permeability.Therefore,modifying and reinforcing the polymer membranes to improve gas separation performance seems essential.Among the various methods for polymer membrane modification,modification with magnesium-based fillers to prepare a mixed matrix membrane(MMM)is considered an efficient method.Owing to magnesium metal's low weight,low density,high strength,and good selectivity,magnesium-based materials(Mg-based materials)have more porosity,higher available surface area,more adsorption sites,lighter weight,and more gas absorption tendency than other fillers,which makes them an attractive choice for the preparation of gas separation MMMs.This research deals with the introduction of Mg-based materials,various methods of synthesis of Mg-based materials,different methods of introducing Mg-based materials into the membrane matrix,and their effect on the performance of MMMs in CO_(2)gas separation applications.Therefore,this review can provide researchers with light horizons in using the high potential of Mg-based materials as efficient fillers in MMMs to achieve excellent permeability and selectivity and generally improve their performance in CO_(2)gas separation applications.展开更多
In this study,Pebax■2533 polymer was used as the continuous phase and UiO-67 was employed as the filler to prepare mixed matrix membranes.UiO-67 is usually synthesized using two ligands:biphenyl-4,4'-dicarboxylat...In this study,Pebax■2533 polymer was used as the continuous phase and UiO-67 was employed as the filler to prepare mixed matrix membranes.UiO-67 is usually synthesized using two ligands:biphenyl-4,4'-dicarboxylate(bpdc)and 2,2'-bipyridine-5,5'-dicarboxylic acid(bpy).In this research,UiO-67 was synthesized not only with these two ligands but also using a mixed ligand approach(50% bpdc and 50% bpy).The synthesized UiOs were incorporated into the polymer matrix at mass percentages ranging from 0% to 2% to form the mixed matrix membranes(MMMs).Membranes containing UiO-67 with mixed ligands exhibited a greater affinity for CO_(2) compared to other membranes.Various analytical techniques,including X-ray diffraction,thermogravimetric analyzer,Fourier transform infrared spectroscope(FTIR),field emission scanning electron micro scope(FESEM),and differential scanning calorimetry,were used to analyze the properties of the prepared membranes.The FTIR spectrum confirmed all desired bands of Pebax?2533 and UiO-67 in the MMMs.The FESEM images showed that the pure Pebax membrane has a uniform structure,and the developed membranes are uniformly incorporated with the synthesized UiO-67 nanoparticles.Gas permeation measurements indicated that CO_(2) permeability and CO_(2)/CH_4 selectivity increased from 402.7 Barrer(1 Barrer=1.33×10^(-14)m^(3)(STP)·m·m^(-2)·s^(-1)·kPa^(-1))and 9.32 for the pure Pebax membrane at 1.0 MPa to 770.1 Barrer and 16.96 in the modified membrane.Additionally,the gas permeation test results demonstrated that adding functionalized porous nanofillers increases the CO_(2)separation performance.Permeability tests at different temperatures revealed that as temperature was raised,at constant pressure,CO_(2) permeability for the membrane containing the mixed ligand increased from 682.2 Barrer to 733.5 Barrer,While CO_(2)/CH_(4) selectivity decreased from 15.46 to 13.43.展开更多
Covalent organic skeletons(COFs)have been widely used in gas separation due to their excellent pore structure,high crystallinity,and high specific surface area.In this work,Dha Tab-COF was synthesized by solvothermal ...Covalent organic skeletons(COFs)have been widely used in gas separation due to their excellent pore structure,high crystallinity,and high specific surface area.In this work,Dha Tab-COF was synthesized by solvothermal method and filled in polyether block polyamide(PEBAX)to form mixed matrix membranes(MMMs).Various characterization methods such as Fourier transform infrared spectroscopy(FT-IR),Xray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM)and X-ray diffractometry(XRD)were used to characterize the structure of Dha Tab-COF as well as the MMMs.The effects of operating pressure,operating temperature and the content of Dha Tab-COF particles on the CO_(2)/CH_(4)separation performance of the membranes were investigated.The best separation performance with a CO_(2)permeability of 295.8 barrer(1 barrer=7.52×10^(-18)m^(3)·(STP)·m^(-2)·m·s^(-1)·Pa^(-1))and a CO_(2)/CH_(4)selectivity of 21.6 was achieved when the Dha Tab-COF content is 2%(mass),which were 45.7%and 108.1%higher than that of the pure PEBAX membrane,respectively.展开更多
基金supported by the National Natural Science Foundation of China(No.52101138,No.52201075)the Natural Science Foundation of Hubei Province(No.2023AFB798,No.2022CFB614)+3 种基金the Shenzhen Science and Technology Program(No.JCYJ20220530160813032)the State Key Laboratory of Solidification Processing in NWPU(No.SKLSP202309,No.SKLSP202308)the Guangdong Basic and Applied Basic Research Foundation(No.2022A1515011227)the State Key Laboratory of Powder Metallurgy of Central South University(No.SklpmKF-05)。
文摘B2-CuZr phase reinforced amorphous alloy matrix composites has become one of the research hotspots in the field of materials science due to the“transformation-induced plasticity”phenomenon,which makes the composites show better macroscopic plastic deformability and obvious work-hardening behavior compared to the conventional amorphous alloy matrix composites reinforced with ductile phases.However,the in-situ metastable B2-CuZr phase tends to undergo eutectoid decomposition during solidification,and the volume fraction,size,and distribution of B2-CuZr phase are difficult to control,which limits the development and application of these materials.To date,much efforts have been made to solve the above problems through composition optimization,casting parameter tailoring,and post-processing technique.In this study,a review was given based on relevant studies,focusing on the predictive approach,reinforcing mechanism,and microstructure tailoring methods of B2-CuZr phase reinforced amorphous alloy matrix composites.The research focus and future prospects were also given for the future development of the present composite system.
文摘The crisis of excessive increase in CO_(2)emissions has quickly become a serious issue and requires low-cost and bio-compatible solutions.The employee of membrane technology for CO_(2)gas separation has garnered significant interest among researchers.However,this method encounters challenges related to selectivity and permeability.Therefore,modifying and reinforcing the polymer membranes to improve gas separation performance seems essential.Among the various methods for polymer membrane modification,modification with magnesium-based fillers to prepare a mixed matrix membrane(MMM)is considered an efficient method.Owing to magnesium metal's low weight,low density,high strength,and good selectivity,magnesium-based materials(Mg-based materials)have more porosity,higher available surface area,more adsorption sites,lighter weight,and more gas absorption tendency than other fillers,which makes them an attractive choice for the preparation of gas separation MMMs.This research deals with the introduction of Mg-based materials,various methods of synthesis of Mg-based materials,different methods of introducing Mg-based materials into the membrane matrix,and their effect on the performance of MMMs in CO_(2)gas separation applications.Therefore,this review can provide researchers with light horizons in using the high potential of Mg-based materials as efficient fillers in MMMs to achieve excellent permeability and selectivity and generally improve their performance in CO_(2)gas separation applications.
基金Babol Noshirvani University of Technology for financially support of this project(BNUT/393054/2023)。
文摘In this study,Pebax■2533 polymer was used as the continuous phase and UiO-67 was employed as the filler to prepare mixed matrix membranes.UiO-67 is usually synthesized using two ligands:biphenyl-4,4'-dicarboxylate(bpdc)and 2,2'-bipyridine-5,5'-dicarboxylic acid(bpy).In this research,UiO-67 was synthesized not only with these two ligands but also using a mixed ligand approach(50% bpdc and 50% bpy).The synthesized UiOs were incorporated into the polymer matrix at mass percentages ranging from 0% to 2% to form the mixed matrix membranes(MMMs).Membranes containing UiO-67 with mixed ligands exhibited a greater affinity for CO_(2) compared to other membranes.Various analytical techniques,including X-ray diffraction,thermogravimetric analyzer,Fourier transform infrared spectroscope(FTIR),field emission scanning electron micro scope(FESEM),and differential scanning calorimetry,were used to analyze the properties of the prepared membranes.The FTIR spectrum confirmed all desired bands of Pebax?2533 and UiO-67 in the MMMs.The FESEM images showed that the pure Pebax membrane has a uniform structure,and the developed membranes are uniformly incorporated with the synthesized UiO-67 nanoparticles.Gas permeation measurements indicated that CO_(2) permeability and CO_(2)/CH_4 selectivity increased from 402.7 Barrer(1 Barrer=1.33×10^(-14)m^(3)(STP)·m·m^(-2)·s^(-1)·kPa^(-1))and 9.32 for the pure Pebax membrane at 1.0 MPa to 770.1 Barrer and 16.96 in the modified membrane.Additionally,the gas permeation test results demonstrated that adding functionalized porous nanofillers increases the CO_(2)separation performance.Permeability tests at different temperatures revealed that as temperature was raised,at constant pressure,CO_(2) permeability for the membrane containing the mixed ligand increased from 682.2 Barrer to 733.5 Barrer,While CO_(2)/CH_(4) selectivity decreased from 15.46 to 13.43.
基金supported by the National Natural Science Foundation of China(No.22271022,No 22378327).
文摘Covalent organic skeletons(COFs)have been widely used in gas separation due to their excellent pore structure,high crystallinity,and high specific surface area.In this work,Dha Tab-COF was synthesized by solvothermal method and filled in polyether block polyamide(PEBAX)to form mixed matrix membranes(MMMs).Various characterization methods such as Fourier transform infrared spectroscopy(FT-IR),Xray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM)and X-ray diffractometry(XRD)were used to characterize the structure of Dha Tab-COF as well as the MMMs.The effects of operating pressure,operating temperature and the content of Dha Tab-COF particles on the CO_(2)/CH_(4)separation performance of the membranes were investigated.The best separation performance with a CO_(2)permeability of 295.8 barrer(1 barrer=7.52×10^(-18)m^(3)·(STP)·m^(-2)·m·s^(-1)·Pa^(-1))and a CO_(2)/CH_(4)selectivity of 21.6 was achieved when the Dha Tab-COF content is 2%(mass),which were 45.7%and 108.1%higher than that of the pure PEBAX membrane,respectively.
