Al/conductive coating/α-Pb O2-Ce O2-Ti O2/β-PbO 2-MnO 2-WC-Zr O2 composite electrode material was prepared on Al/conductive coating/α-PbO 2-Ce O2-Ti O2 substrate by electrochemical oxidation co-deposition technique...Al/conductive coating/α-Pb O2-Ce O2-Ti O2/β-PbO 2-MnO 2-WC-Zr O2 composite electrode material was prepared on Al/conductive coating/α-PbO 2-Ce O2-Ti O2 substrate by electrochemical oxidation co-deposition technique. The effects of current density on the chemical composition, electrocatalytic activity, and stability of the composite anode material were investigated by energy dispersive X-ray spectroscopy（EDXS）, anode polarization curves, quasi-stationary polarization（Tafel） curves, electrochemical impedance spectroscopy（EIS）, scanning electron microscopy（SEM）, and X-ray diffraction（XRD）. Results reveal that the composite electrode obtained at 1 A/dm2 possesses the lowest overpotential（0.610 V at 500 A/m2） for oxygen evolution, the best electrocatalytic activity, the longest service life（360 h at 40 °C in 150 g/L H2SO4 solution under 2 A/cm2）, and the lowest cell voltage（2.75 V at 500 A/m2）. Furthermore, with increasing current density, the coating exhibits grain growth and the decrease of content of Mn O2. Only a slight effect on crystalline structure is observed.展开更多
ZrO2-MnO2-ZnO supports were prepared by the co-precipitation method,and then Ni-Na/ZrO2-MnO2-ZnO catalysts were prepared by the impregnation method.In this paper,the reactions to synthesize methyl isopropyl ketone and...ZrO2-MnO2-ZnO supports were prepared by the co-precipitation method,and then Ni-Na/ZrO2-MnO2-ZnO catalysts were prepared by the impregnation method.In this paper,the reactions to synthesize methyl isopropyl ketone and diethyl ketone by the one-step synthesis method over this catalyst were studied,and meanwhile,the impact of the catalyst preparation conditions and the reaction conditions on catalyst performance was also investigated.It was observed that under the conditions when Ni loading was 25%,calcination temperature was 400℃ and reduction temperature was 410℃,this catalyst had good catalytic performance on the reaction.The suitable reaction conditions were achieved:reaction temperature was 400℃;reaction at atmospheric pressure;liquid hourly space velocity of raw material of 0.5 h 1 ;and the molar ratio of(methanol)/(methyl ethyl ketone)/(water) was equal to 1/1/1.Under such conditions,the conversion of methyl ethyl ketone could achieve 41.7%,and the overall selectivity of methyl isopropyl ketone and diethyl ketone could achieve 83.3%,which was comparable to the conversion of 38.1% and the selectivity of 82.2% achieved by using palladium as the active material.The good stability made this catalyst have good prospects for industrial application.展开更多
The liquid iron containing elements Nb,Mn and Si has been equilibrated with MgO-SiO_2-MnO slag melts at 1600℃ in a Mo wire-wound resistance furnace with a duration of 4h.The oxygen activities in liquid iron were meas...The liquid iron containing elements Nb,Mn and Si has been equilibrated with MgO-SiO_2-MnO slag melts at 1600℃ in a Mo wire-wound resistance furnace with a duration of 4h.The oxygen activities in liquid iron were measured with oxygen sensors.Using the known equilibrium constants of concerning reactions and the oxygen activities in liquid iron,the activities of components in the slag melts can be calculated.It was found that the par- tition ratios of Nb.Mn and Si have a close linear relationship with α_(FeO) in logarithmic scale.The dependence of Nb partition ratio on mole fractions of the slag components was al- so obtained.展开更多
基金Projects(51004056,51004057)supported by the National Natural Science Foundation of ChinaProject(KKZ6201152009)supported by the Opening Foundation of Key Laboratory of Inorganic Coating Materials,Chinese Academy of Sciences+2 种基金Project(2010ZC052)supported by the Applied Basic Research Foundation of Yunnan Province,ChinaProject(20125314110011)supported by the Specialized Research Fund for the Doctoral Program of Higher Education,ChinaProject(2010247)supported by Analysis&Testing Foundation of Kunming University of Science and Technology,China
文摘Al/conductive coating/α-Pb O2-Ce O2-Ti O2/β-PbO 2-MnO 2-WC-Zr O2 composite electrode material was prepared on Al/conductive coating/α-PbO 2-Ce O2-Ti O2 substrate by electrochemical oxidation co-deposition technique. The effects of current density on the chemical composition, electrocatalytic activity, and stability of the composite anode material were investigated by energy dispersive X-ray spectroscopy（EDXS）, anode polarization curves, quasi-stationary polarization（Tafel） curves, electrochemical impedance spectroscopy（EIS）, scanning electron microscopy（SEM）, and X-ray diffraction（XRD）. Results reveal that the composite electrode obtained at 1 A/dm2 possesses the lowest overpotential（0.610 V at 500 A/m2） for oxygen evolution, the best electrocatalytic activity, the longest service life（360 h at 40 °C in 150 g/L H2SO4 solution under 2 A/cm2）, and the lowest cell voltage（2.75 V at 500 A/m2）. Furthermore, with increasing current density, the coating exhibits grain growth and the decrease of content of Mn O2. Only a slight effect on crystalline structure is observed.
基金Supported by the National Science and Technology Support Program Project (2006BAE03B06)
文摘ZrO2-MnO2-ZnO supports were prepared by the co-precipitation method,and then Ni-Na/ZrO2-MnO2-ZnO catalysts were prepared by the impregnation method.In this paper,the reactions to synthesize methyl isopropyl ketone and diethyl ketone by the one-step synthesis method over this catalyst were studied,and meanwhile,the impact of the catalyst preparation conditions and the reaction conditions on catalyst performance was also investigated.It was observed that under the conditions when Ni loading was 25%,calcination temperature was 400℃ and reduction temperature was 410℃,this catalyst had good catalytic performance on the reaction.The suitable reaction conditions were achieved:reaction temperature was 400℃;reaction at atmospheric pressure;liquid hourly space velocity of raw material of 0.5 h 1 ;and the molar ratio of(methanol)/(methyl ethyl ketone)/(water) was equal to 1/1/1.Under such conditions,the conversion of methyl ethyl ketone could achieve 41.7%,and the overall selectivity of methyl isopropyl ketone and diethyl ketone could achieve 83.3%,which was comparable to the conversion of 38.1% and the selectivity of 82.2% achieved by using palladium as the active material.The good stability made this catalyst have good prospects for industrial application.
文摘The liquid iron containing elements Nb,Mn and Si has been equilibrated with MgO-SiO_2-MnO slag melts at 1600℃ in a Mo wire-wound resistance furnace with a duration of 4h.The oxygen activities in liquid iron were measured with oxygen sensors.Using the known equilibrium constants of concerning reactions and the oxygen activities in liquid iron,the activities of components in the slag melts can be calculated.It was found that the par- tition ratios of Nb.Mn and Si have a close linear relationship with α_(FeO) in logarithmic scale.The dependence of Nb partition ratio on mole fractions of the slag components was al- so obtained.
