Compatibilization is crucial for the blending of immiscible polymers to develop high-performance composites;however,traditional compatibilization by copolymers(pre-made or in-situ generation)suffers from weak interfac...Compatibilization is crucial for the blending of immiscible polymers to develop high-performance composites;however,traditional compatibilization by copolymers(pre-made or in-situ generation)suffers from weak interface anchoring,and inorganic particles have gained extensive attention recently owing to their large interfacial desorption energy,while their low affinity to bulk components is a drawback.In this study,an interfacial atom transfer radical polymerization(ATRP)technique was employed to grow polystyrene(PS)and poly(2-hydroxyethyl methacrylate)(PHEMA)simultaneously on different hemispheres of Br-functionalized SiO_(2) nanoparticles to stabilize a Pickering emulsion,whereby a brush-type Janus nanoparticle(SiO_(2)@JNP)was developed.The polymer brushes were well-characterized,and the Janus feature was validated by transmission electron microscope(TEM)observation of the sole hemisphere grafting of SiO_(2)-PS as a control sample.SiO_(2)@JNP was demonstrated to be an efficient compatibilizer for a PS/poly(methyl methacrylate)(PMMA)immiscible blend,and the droplet-matrix morphology was significantly refined.The mechanical strength and toughness of the blend were synchronously enhanced at a low content SiO_(2)@JNP optimized~0.9 wt%,with the tensile strength,elongation at break and impact strength increased by 17.7%,26.6%and 19.6%,respectively.This enhancement may be attributed to the entanglements between the grafted polymer brushes and individual components that improve the particle-bulk phase affinity and enforce interfacial adhesion.展开更多
To obtain porous alumina ceramic with high strength,a novel gelcasting system based on 2-hydroxyethyl methacrylate(HEMA)dissolved in tert-butyl alcohol(TBA)was developed.The polymerization of the HEMA-TBA gelcasting s...To obtain porous alumina ceramic with high strength,a novel gelcasting system based on 2-hydroxyethyl methacrylate(HEMA)dissolved in tert-butyl alcohol(TBA)was developed.The polymerization of the HEMA-TBA gelcasting system,the thermal behavior of obtained green body,and the microstructures and mechanical properties of the sintered bodies were investigated by rheometer,TG-DSC,SEM and bending strength testing,respectively.The results show that,(1)10 mg/mL of the initiator(benzoyl peroxide)is the optimal amount for polymerization of this gelscasting system at 25 ℃;(2)The alumina suspension of the HEMA-TBA gelcasting system showing shear-thinning behavior is sufficiently low for gelcasting process;(3)The bending strength of porous alumina ceramic samples,whose porosities range from 42% to 56%,is from(8±0.5)to(91±4.5)MPa.展开更多
An efficient protocol for the synthesis of N^6-（2-Hydroxyethyl）adenosine and its analogues through nucleophilic substitution was developed. All the reactions were completed in 10 rain under microwave irradiation. Us...An efficient protocol for the synthesis of N^6-（2-Hydroxyethyl）adenosine and its analogues through nucleophilic substitution was developed. All the reactions were completed in 10 rain under microwave irradiation. Using water as solvent makes our method eco-friendly and easy to handle with.展开更多
Studies on the degradation process of waste polyethylene terephthalate(PET)have become increasingly mature,but there are relatively few studies on the separation of degradation products.The products contain many compo...Studies on the degradation process of waste polyethylene terephthalate(PET)have become increasingly mature,but there are relatively few studies on the separation of degradation products.The products contain many components and the separation of which is difficult.Therefore,the study on phase equilibrium thermodynamics of bis-2-hydroxyethyl terephthalate(BHET)is of great theoretical significance and practical value to provide basic data for the BHET crystallization separation.In this work,the degraded products were purified and characterized.The solubility of BHET in methanol,ethanol,ethylene glycol,water and the mixture of ethylene glycol+water were determined by static method.The experimental results were correlated with different models,such as ideal solution(IS)model,λh equation,Apelblat equation and NRTL model.Based on the van’t Hoff equation,the mixing Gibbs energy,enthalpy and entropy were calculated.From this work,the basic data which can be used to guide the crystallization process of BHET were obtained,including solubility data,correlation model and thermodynamic properties.展开更多
Silk was grafted using 2-hydroxyethyl methacrylate(HEMA)by atom transfer radical polymerization(ATRP)method.The amino groups and hydroxyl groups on the side chains of the silk fibroin was reacted with 2-bromoisobutyry...Silk was grafted using 2-hydroxyethyl methacrylate(HEMA)by atom transfer radical polymerization(ATRP)method.The amino groups and hydroxyl groups on the side chains of the silk fibroin was reacted with 2-bromoisobutyryl bromide(BriB-Br)to obtain efficient macroinitiator for ATRP.And the macroinitiator was grafted with HEMA in water aqueous using CuBr/N,N,N',N",N"-pentamethyldiethylenetriamine(PMDETA)as catalyst system.The effects of monomer concentration,the proportion of CuBr and PMDETA,grafting temperature and time on the silk grafting were discussed,and the optimal grafting technology was obtained.FT-IR characterization of the grafted silk showed a peak corresponding to HEMA,which indicated that HEMA was grafted onto the surface of silk.ATRP method could be applied on the silk modification and this technique provided a new way for silk grafting.展开更多
This work aimed at effectively utilizing the chemically depolymerized waste poly（ethylene terephthalate）（PET） fibers into useful products for the textile industry.PET fibers were glycolytically degraded by excess ...This work aimed at effectively utilizing the chemically depolymerized waste poly（ethylene terephthalate）（PET） fibers into useful products for the textile industry.PET fibers were glycolytically degraded by excess ethylene glycol as depolymerizing agent and zinc acetate dihydrate as catalyst.The glycolysis product,bis（2-hydroxyethyl） terephthalate（BHET）,was purified through repeated crystallization to get an average yield above 80%.Then,BHET was nitrated,reduced,and azotized to get diazonium salt.Finally,the produced diazonium salt was coupled with 1-（4-sulfophenyl）-3-methyl-5-pyrazolone to get azo dyestuff.The structures of BHET and azo dyestuff were identified by FT1 R and ^1H NMR spectra and elemental analysis.Nylon filaments dyed by the synthesized azo dyestuff with the dye bath pH from 4.14 to 5.88 showed bright yellow color.The performances of the dyestuff were described with dye uptake,color fastness,K/S,L^＊,a^＊,b^＊.and △E^＊ values.展开更多
Multiarm star block copolymers hyperbranched polyethylenimine-b-poly（2-hydroxyethyl methacrylate） （HPEI-b- PHEMA） with average 28 PHEMA arms have been prepared by atom transfer radical polymerization （ATRP） of H...Multiarm star block copolymers hyperbranched polyethylenimine-b-poly（2-hydroxyethyl methacrylate） （HPEI-b- PHEMA） with average 28 PHEMA arms have been prepared by atom transfer radical polymerization （ATRP） of HEMA in a mixed solvent of methanol and water using a core-first strategy. The hyperbranched macroinitiator employed was prepared on the basis of well-defined hyperbranched polyethylenimine with Mw/Mn of 1.04 by amidation with 2-bromo-isobutyryl bromide. The polymerization condition was optimized to prepare star copolymers with narrow dispersity, and the variables included the volume ratio of methanol to water, the molar ratio of initiating site to CuC1 and the molar ratio of [CuCl]：[CuBr2]. Under the optimized polymerization condition, the lowest Mw/Mn value of the obtained star copolymers was around 1.3. Kinetic analysis showed that an induction period existed in the polymerization of HEMA. After this induction period, a linear dependence of ln（[M]0/[M]t） on time was observed. The obtained HPEI-b-PHEMA could adsorb hydrophilic molecules. The comparison with the star copolymer with hydrophobic core and hydrophilic PHEMA shell verified that both the hydrophilic core and shell could host the hydrophilic vips, but the amidated HPEI core was more effective than the PHEMA shell.展开更多
Color stability of dental resin modified glass ionomer （RMGI） has been a challenge to dentistry; therefore, systematic changes in 2-hydroxyethyl methacrylate （HEMA） content were performed experimentally to find an...Color stability of dental resin modified glass ionomer （RMGI） has been a challenge to dentistry; therefore, systematic changes in 2-hydroxyethyl methacrylate （HEMA） content were performed experimentally to find an idea to enhance the color stability. Changes in color （△E＊ab） and color coordinates （△L＊, △a＊ and △b＊） of experimental 10-50 wt pct HEMA-added dental glass ionomers （HAGIs） and corresponding RMGIs were determined after 5000 cycles of thermocycling. Color changes of HAGIs were not influenced by the HEMA content while △L＊, △a＊ and △b＊ values were influenced by the HEMA content. Color stability of 30% or 40% HEMA-added HAGIs was not different from those of the commercial RMGIs. Since the influence of HEMA itself on the color stability of HAGIs was limited, compositional modification to increase the color stability of these materials should be developed.展开更多
Lithium aluminium amide [LiAI（NHR）4] 5 obtained by treating the primary amine 4 with LiAlH4 could promote the ring opening of epoxide 2 and led to high regioselective product of racemic bis[2-（6-fluoro-2-chromanyl...Lithium aluminium amide [LiAI（NHR）4] 5 obtained by treating the primary amine 4 with LiAlH4 could promote the ring opening of epoxide 2 and led to high regioselective product of racemic bis[2-（6-fluoro-2-chromanyl）-2-hydroxyethyl]amine methanesulfonic acid salt 7.展开更多
A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The sa...A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The samples obtained from the synthesis were characterized by Fourier Transform-Infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (<sup>1</sup>H NMR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The results show that the synthesis of the polymers is more feasible under neat conditions rather than solvent directed reaction. Moreover, the DSC data shows that the polystyrene obtained is amorphous in nature and therefore displayed only a glass transition signal rather than crystallization and melting peaks. In addition, this study indicates that homolopolymerization of styrene via free radical polymerization tends to be preferable in less polar solvents like THF than in non-polar solvents like benzene. Benzene might destabilize the formation of the reactive radicals leading to the formation of the products. In summary, the homolpolymerization of styrene is more feasible than the homopolymerization 2-hydroxyethyl methacrylate under the experimental setup used. Styrene is more reactive than 2-hydroxyethyl methacrylate than free radical polymerization reaction due in part of the generation of the benzylic radical intermediate which is more stable leading to the formation of products than alkyl radical which are less stable. Furthermore, polymerization of styrene under neat conditions is preferable in solvent-assisted environments. The choice of solvent for the synthesis of these polymers is crucial and therefore the selection of solvent that leads to the formation of a more stable reaction intermediate is more favorable. It is worth noting that the structure of the proposed copolymer consists of a highly polar and hydrophilic monomer, 2-hydroxyethyl methacrylate and a highly non-polar and hydrophobic monomer, styrene. These functionalities constitute an amphiphilic copolymer with diverse characteristics. A plausible explanation underlying our observations is that the reaction conditions employed in the synthesis of these copolymers might not be the right route required under free radical polymerization.展开更多
This paper describes the fabrication, characterization and properties of a novel hybrid poly（ethylene glycol） （PEG） based hydrogel via in situ polymerization. The hybrid hydrogel was fabricated by free-radical red...This paper describes the fabrication, characterization and properties of a novel hybrid poly（ethylene glycol） （PEG） based hydrogel via in situ polymerization. The hybrid hydrogel was fabricated by free-radical redox polymerization using ammonium persulfate （APS） and N, N, N/, NCtetramethylethylenediamine （TEMED） as initiators and N, NCmethylene bisacrylamide （BIS） as cross-linker at 60~C. To create a hybrid hydrogel, 0.2% （mass fraction） of MgA1 layered double hydroxide （LDH） was added to the aqueous solution by ultrasonic disper- sion. The physicochemical properties of hybrid hydrogel under vacuum freeze-drying processing were characterized by Fourier transform infrared （FTIR） spectroscopy, thermal gravimetric analysis （TGA） and scanning electron microscopy （SEM）, while swelling kinetics and gel content were calculated. Swelling degree in distilled water varied from 94%--125% with a gel mass fraction of 83%--91%. SEM images showed that the micron pore size of hydrogel could be adjusted within the range of several micrometers by changing the cross-linker mass fraction from 2% to 10% （based on glycol）. The results showed that the hybrid hydrogels exhibited excellent physicochemical behavior and might be a promising material for applications in tissue engineering and drug delivery.展开更多
The effects of N-2-hydroxyethyl-N-methyl-p-toluidine (HMT) on MMA polymerization using organic peroxide as an initiator and on AN photoinduced polymerization have been investigated respectively. The kinetics of polyme...The effects of N-2-hydroxyethyl-N-methyl-p-toluidine (HMT) on MMA polymerization using organic peroxide as an initiator and on AN photoinduced polymerization have been investigated respectively. The kinetics of polymerization and the overall activation energy of polymerization were determined. Based on kinetics study and the end group analysis of the polymer obtained by UV spectrum method, the initiation mechanism is proposed.展开更多
Polyfluoroalkyl substituted 2-hydroxyethyl acrylate 6 was synthesized in six steps usingglycerol as a starting material. A preliminary investigation has been taken on the synthesisand characterization of copolymers of...Polyfluoroalkyl substituted 2-hydroxyethyl acrylate 6 was synthesized in six steps usingglycerol as a starting material. A preliminary investigation has been taken on the synthesisand characterization of copolymers of 6 and 2-hydroxyethyl methacrylate.展开更多
AIM： To investigate the effect of cyclosporine A （CsA）, FK-506, and mycophenolate mofetil （MMF） and 40-0-[2- hydroxyethyl]rapamycin （RAD） on proliferation of human intrahepatic biliary epithelial cells （BECs）...AIM： To investigate the effect of cyclosporine A （CsA）, FK-506, and mycophenolate mofetil （MMF） and 40-0-[2- hydroxyethyl]rapamycin （RAD） on proliferation of human intrahepatic biliary epithelial cells （BECs） in vitro.METHODS： BECs were isolated from six human liver tissuespecimens with the immunomagnetic separation method and treated with different concentrations of CsA, FK-S06, RAD, and MMF in vitro. Proliferation of the cells was measured by MTT assay at 24 and 48 h after treatment, respectively. One-way analysis of variance was used to analyze the results. Expression of CK 19 in BECs was monitored by flow cytometry and Western blot.RESULTS： Six lines of BECs were established. They survived for 4-18 wk in vitro. Flow cytometry analysis showed that these cells always expressed CK19. CsA, FK-506, RAD, and MMF inhibited proliferation of BECs in a dose-dependent manner. The lowest concentration of CsA, FK-506, RAD, and MMF to inhibit proliferation of BECs （P〈0.05） was 500, 100, 0.25, and 100 pg/L, respectively. However, the expression of CK19 by BECs was not changed.CONCLUSION： CsA, FK-506, RAD, and MMF have an antiproliferative effect on human intrahepatic BECs in vitro, while RAD has the strongest growth-inhibitory effect. Their possible effects on liver regeneration and bile duct injury in transplant patients should be further investigated.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.22172028,21903015,and 22403017)Natural Science Foundation of Fujian Province of China(No.2022J05041)。
文摘Compatibilization is crucial for the blending of immiscible polymers to develop high-performance composites;however,traditional compatibilization by copolymers(pre-made or in-situ generation)suffers from weak interface anchoring,and inorganic particles have gained extensive attention recently owing to their large interfacial desorption energy,while their low affinity to bulk components is a drawback.In this study,an interfacial atom transfer radical polymerization(ATRP)technique was employed to grow polystyrene(PS)and poly(2-hydroxyethyl methacrylate)(PHEMA)simultaneously on different hemispheres of Br-functionalized SiO_(2) nanoparticles to stabilize a Pickering emulsion,whereby a brush-type Janus nanoparticle(SiO_(2)@JNP)was developed.The polymer brushes were well-characterized,and the Janus feature was validated by transmission electron microscope(TEM)observation of the sole hemisphere grafting of SiO_(2)-PS as a control sample.SiO_(2)@JNP was demonstrated to be an efficient compatibilizer for a PS/poly(methyl methacrylate)(PMMA)immiscible blend,and the droplet-matrix morphology was significantly refined.The mechanical strength and toughness of the blend were synchronously enhanced at a low content SiO_(2)@JNP optimized~0.9 wt%,with the tensile strength,elongation at break and impact strength increased by 17.7%,26.6%and 19.6%,respectively.This enhancement may be attributed to the entanglements between the grafted polymer brushes and individual components that improve the particle-bulk phase affinity and enforce interfacial adhesion.
基金Project(51202296) supported by the National Natural Science Foundation of China
文摘To obtain porous alumina ceramic with high strength,a novel gelcasting system based on 2-hydroxyethyl methacrylate(HEMA)dissolved in tert-butyl alcohol(TBA)was developed.The polymerization of the HEMA-TBA gelcasting system,the thermal behavior of obtained green body,and the microstructures and mechanical properties of the sintered bodies were investigated by rheometer,TG-DSC,SEM and bending strength testing,respectively.The results show that,(1)10 mg/mL of the initiator(benzoyl peroxide)is the optimal amount for polymerization of this gelscasting system at 25 ℃;(2)The alumina suspension of the HEMA-TBA gelcasting system showing shear-thinning behavior is sufficiently low for gelcasting process;(3)The bending strength of porous alumina ceramic samples,whose porosities range from 42% to 56%,is from(8±0.5)to(91±4.5)MPa.
基金the National Natural Science Foundation of China(No.20372018)
文摘An efficient protocol for the synthesis of N^6-（2-Hydroxyethyl）adenosine and its analogues through nucleophilic substitution was developed. All the reactions were completed in 10 rain under microwave irradiation. Using water as solvent makes our method eco-friendly and easy to handle with.
基金financially supported by the National Key Research and Development Program of China(2019YFC1908204)the National Natural Scientific Fund of China(No.21878292,21776289,21908232,21978291)+1 种基金Innovation Academy forGreen Manufacture,Chinese Academy of Sciences(No.IAGM2020C12,IAGM2020C21 and IAGM-2019-A06)K.C.Wong Education Foundation(No.GJTD-2018-04)。
文摘Studies on the degradation process of waste polyethylene terephthalate(PET)have become increasingly mature,but there are relatively few studies on the separation of degradation products.The products contain many components and the separation of which is difficult.Therefore,the study on phase equilibrium thermodynamics of bis-2-hydroxyethyl terephthalate(BHET)is of great theoretical significance and practical value to provide basic data for the BHET crystallization separation.In this work,the degraded products were purified and characterized.The solubility of BHET in methanol,ethanol,ethylene glycol,water and the mixture of ethylene glycol+water were determined by static method.The experimental results were correlated with different models,such as ideal solution(IS)model,λh equation,Apelblat equation and NRTL model.Based on the van’t Hoff equation,the mixing Gibbs energy,enthalpy and entropy were calculated.From this work,the basic data which can be used to guide the crystallization process of BHET were obtained,including solubility data,correlation model and thermodynamic properties.
基金National Natural Science Foundation of China(No.50673071,No.50973079)Natural Science Fund for Colleges and Universities in Jiangsu Province,China(No.07KJD540188,No.09KJA540001)
文摘Silk was grafted using 2-hydroxyethyl methacrylate(HEMA)by atom transfer radical polymerization(ATRP)method.The amino groups and hydroxyl groups on the side chains of the silk fibroin was reacted with 2-bromoisobutyryl bromide(BriB-Br)to obtain efficient macroinitiator for ATRP.And the macroinitiator was grafted with HEMA in water aqueous using CuBr/N,N,N',N",N"-pentamethyldiethylenetriamine(PMDETA)as catalyst system.The effects of monomer concentration,the proportion of CuBr and PMDETA,grafting temperature and time on the silk grafting were discussed,and the optimal grafting technology was obtained.FT-IR characterization of the grafted silk showed a peak corresponding to HEMA,which indicated that HEMA was grafted onto the surface of silk.ATRP method could be applied on the silk modification and this technique provided a new way for silk grafting.
基金financially supported by the National High-tech R&D Program of China(863 Program,No.2012AA030313)the Open Project Program of Key Laboratory of Eco-Textiles(Jiangnan University),Ministry of Education,China(No.KLET1115)+1 种基金the Fundamental Research Funds for the Central Universities(No. JUSRP11201)the Cooperative Innovation Fund-Prospective Project of Jiangsu Province,China(No.BY2012060)
文摘This work aimed at effectively utilizing the chemically depolymerized waste poly（ethylene terephthalate）（PET） fibers into useful products for the textile industry.PET fibers were glycolytically degraded by excess ethylene glycol as depolymerizing agent and zinc acetate dihydrate as catalyst.The glycolysis product,bis（2-hydroxyethyl） terephthalate（BHET）,was purified through repeated crystallization to get an average yield above 80%.Then,BHET was nitrated,reduced,and azotized to get diazonium salt.Finally,the produced diazonium salt was coupled with 1-（4-sulfophenyl）-3-methyl-5-pyrazolone to get azo dyestuff.The structures of BHET and azo dyestuff were identified by FT1 R and ^1H NMR spectra and elemental analysis.Nylon filaments dyed by the synthesized azo dyestuff with the dye bath pH from 4.14 to 5.88 showed bright yellow color.The performances of the dyestuff were described with dye uptake,color fastness,K/S,L^＊,a^＊,b^＊.and △E^＊ values.
基金financially supported by the Program for New Century Excellent Talents in Universitiesthe National Natural Science Foundation of China (Nos. 21074088, 31201426)
文摘Multiarm star block copolymers hyperbranched polyethylenimine-b-poly（2-hydroxyethyl methacrylate） （HPEI-b- PHEMA） with average 28 PHEMA arms have been prepared by atom transfer radical polymerization （ATRP） of HEMA in a mixed solvent of methanol and water using a core-first strategy. The hyperbranched macroinitiator employed was prepared on the basis of well-defined hyperbranched polyethylenimine with Mw/Mn of 1.04 by amidation with 2-bromo-isobutyryl bromide. The polymerization condition was optimized to prepare star copolymers with narrow dispersity, and the variables included the volume ratio of methanol to water, the molar ratio of initiating site to CuC1 and the molar ratio of [CuCl]：[CuBr2]. Under the optimized polymerization condition, the lowest Mw/Mn value of the obtained star copolymers was around 1.3. Kinetic analysis showed that an induction period existed in the polymerization of HEMA. After this induction period, a linear dependence of ln（[M]0/[M]t） on time was observed. The obtained HPEI-b-PHEMA could adsorb hydrophilic molecules. The comparison with the star copolymer with hydrophobic core and hydrophilic PHEMA shell verified that both the hydrophilic core and shell could host the hydrophilic vips, but the amidated HPEI core was more effective than the PHEMA shell.
基金supported by the Korea Science and Engineering Foundation (KOSEF) Science Research Center grant funded by the Korean Ministry of Education,Science and Technology (MEST) through Bone Metabolism Research Center (No.0617-20080007)
文摘Color stability of dental resin modified glass ionomer （RMGI） has been a challenge to dentistry; therefore, systematic changes in 2-hydroxyethyl methacrylate （HEMA） content were performed experimentally to find an idea to enhance the color stability. Changes in color （△E＊ab） and color coordinates （△L＊, △a＊ and △b＊） of experimental 10-50 wt pct HEMA-added dental glass ionomers （HAGIs） and corresponding RMGIs were determined after 5000 cycles of thermocycling. Color changes of HAGIs were not influenced by the HEMA content while △L＊, △a＊ and △b＊ values were influenced by the HEMA content. Color stability of 30% or 40% HEMA-added HAGIs was not different from those of the commercial RMGIs. Since the influence of HEMA itself on the color stability of HAGIs was limited, compositional modification to increase the color stability of these materials should be developed.
基金the National 863 Program(No.2003AA323030)the National Natural Science Foundation of China(No.50272069 and No.20472090)for financial support.
文摘Lithium aluminium amide [LiAI（NHR）4] 5 obtained by treating the primary amine 4 with LiAlH4 could promote the ring opening of epoxide 2 and led to high regioselective product of racemic bis[2-（6-fluoro-2-chromanyl）-2-hydroxyethyl]amine methanesulfonic acid salt 7.
文摘A series of homo and copolymers of styrene (ST) and 2-hydroxyethyl methacrylate (HEMA) in three different media (bulk, tetrahydrofuran, and benzene) have been investigated by free radical polymerization method. The samples obtained from the synthesis were characterized by Fourier Transform-Infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (<sup>1</sup>H NMR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The results show that the synthesis of the polymers is more feasible under neat conditions rather than solvent directed reaction. Moreover, the DSC data shows that the polystyrene obtained is amorphous in nature and therefore displayed only a glass transition signal rather than crystallization and melting peaks. In addition, this study indicates that homolopolymerization of styrene via free radical polymerization tends to be preferable in less polar solvents like THF than in non-polar solvents like benzene. Benzene might destabilize the formation of the reactive radicals leading to the formation of the products. In summary, the homolpolymerization of styrene is more feasible than the homopolymerization 2-hydroxyethyl methacrylate under the experimental setup used. Styrene is more reactive than 2-hydroxyethyl methacrylate than free radical polymerization reaction due in part of the generation of the benzylic radical intermediate which is more stable leading to the formation of products than alkyl radical which are less stable. Furthermore, polymerization of styrene under neat conditions is preferable in solvent-assisted environments. The choice of solvent for the synthesis of these polymers is crucial and therefore the selection of solvent that leads to the formation of a more stable reaction intermediate is more favorable. It is worth noting that the structure of the proposed copolymer consists of a highly polar and hydrophilic monomer, 2-hydroxyethyl methacrylate and a highly non-polar and hydrophobic monomer, styrene. These functionalities constitute an amphiphilic copolymer with diverse characteristics. A plausible explanation underlying our observations is that the reaction conditions employed in the synthesis of these copolymers might not be the right route required under free radical polymerization.
基金the National Natural Science Foundation of China(No.31000427)the China Postdoctoral Science Foundation(No.20100481214)the Fundamental Research Funds for the Central Universities of China(Nos.2012QN052 and 2012TD013)
文摘This paper describes the fabrication, characterization and properties of a novel hybrid poly（ethylene glycol） （PEG） based hydrogel via in situ polymerization. The hybrid hydrogel was fabricated by free-radical redox polymerization using ammonium persulfate （APS） and N, N, N/, NCtetramethylethylenediamine （TEMED） as initiators and N, NCmethylene bisacrylamide （BIS） as cross-linker at 60~C. To create a hybrid hydrogel, 0.2% （mass fraction） of MgA1 layered double hydroxide （LDH） was added to the aqueous solution by ultrasonic disper- sion. The physicochemical properties of hybrid hydrogel under vacuum freeze-drying processing were characterized by Fourier transform infrared （FTIR） spectroscopy, thermal gravimetric analysis （TGA） and scanning electron microscopy （SEM）, while swelling kinetics and gel content were calculated. Swelling degree in distilled water varied from 94%--125% with a gel mass fraction of 83%--91%. SEM images showed that the micron pore size of hydrogel could be adjusted within the range of several micrometers by changing the cross-linker mass fraction from 2% to 10% （based on glycol）. The results showed that the hybrid hydrogels exhibited excellent physicochemical behavior and might be a promising material for applications in tissue engineering and drug delivery.
基金The project supported by the National Natural Science Foundation of China
文摘The effects of N-2-hydroxyethyl-N-methyl-p-toluidine (HMT) on MMA polymerization using organic peroxide as an initiator and on AN photoinduced polymerization have been investigated respectively. The kinetics of polymerization and the overall activation energy of polymerization were determined. Based on kinetics study and the end group analysis of the polymer obtained by UV spectrum method, the initiation mechanism is proposed.
基金The project was supported by the National Natural Science Foundation,Grant approval numbers 29472074 and 29632003
文摘Polyfluoroalkyl substituted 2-hydroxyethyl acrylate 6 was synthesized in six steps usingglycerol as a starting material. A preliminary investigation has been taken on the synthesisand characterization of copolymers of 6 and 2-hydroxyethyl methacrylate.
文摘AIM： To investigate the effect of cyclosporine A （CsA）, FK-506, and mycophenolate mofetil （MMF） and 40-0-[2- hydroxyethyl]rapamycin （RAD） on proliferation of human intrahepatic biliary epithelial cells （BECs） in vitro.METHODS： BECs were isolated from six human liver tissuespecimens with the immunomagnetic separation method and treated with different concentrations of CsA, FK-S06, RAD, and MMF in vitro. Proliferation of the cells was measured by MTT assay at 24 and 48 h after treatment, respectively. One-way analysis of variance was used to analyze the results. Expression of CK 19 in BECs was monitored by flow cytometry and Western blot.RESULTS： Six lines of BECs were established. They survived for 4-18 wk in vitro. Flow cytometry analysis showed that these cells always expressed CK19. CsA, FK-506, RAD, and MMF inhibited proliferation of BECs in a dose-dependent manner. The lowest concentration of CsA, FK-506, RAD, and MMF to inhibit proliferation of BECs （P〈0.05） was 500, 100, 0.25, and 100 pg/L, respectively. However, the expression of CK19 by BECs was not changed.CONCLUSION： CsA, FK-506, RAD, and MMF have an antiproliferative effect on human intrahepatic BECs in vitro, while RAD has the strongest growth-inhibitory effect. Their possible effects on liver regeneration and bile duct injury in transplant patients should be further investigated.
