The rapid cycling synchrotron(RCS)at the China spallation neutron source operates as a high-intensity proton accelerator.The coupled bunch instability was observed during RCS beam commissioning,which significantly lim...The rapid cycling synchrotron(RCS)at the China spallation neutron source operates as a high-intensity proton accelerator.The coupled bunch instability was observed during RCS beam commissioning,which significantly limited the beam power.To investigate the dynamics of instability under an increased beam power,a pulsed octupole magnet with a gradient of 900 T/m^(3) was developed.The magnet system integrated an octupole magnet with a pulsed power supply.The field was carefully measured to examine the performance before its installation into the tunnel.After the installation of the magnets,beam measurements were performed to confirm the effectiveness of the instability mitigation on an actual proton beam.The measurement results show that the instability can be suppressed using the pulsed octupole magnet,particularly at the highenergy stage in an acceleration cycle,meeting the requirements for stable operation of the accelerator.Additionally,when the instability is completely suppressed through chromaticity optimization,octupole magnets can significantly enhance the RCS transmission efficiency,which is crucial for controlling beam loss.The pulsed octupole magnet offers significant progress in beam stability in the RCS,providing valuable experience for further beam power enhancement.展开更多
Laser additive manufacturing(LAM)has been widely used in high-end manufacturing fields such as aerospace,nuclear power,and shipbuilding.However,it is a grand challenge for direct and continuous observation of complex ...Laser additive manufacturing(LAM)has been widely used in high-end manufacturing fields such as aerospace,nuclear power,and shipbuilding.However,it is a grand challenge for direct and continuous observation of complex laser-matter interaction,melt flow,and defect formation during LAM due to extremely large temperature gradient,fast cooling rate,and small time(millisecond)and space(micron)scales.The emergence of synchrotron radiation provides a feasible approach for in situ observation of the LAM process.This paper outlines the current development in real-time characterization of LAM by synchrotron radiation,including laser-matter interaction,molten pool evolution,solidification structure evolution,and defects formation and elimination.Furthermore,the future development direction and application-oriented research are also discussed.展开更多
Controlling the morphology of Al_(2) Cu intermetallic compounds(IMCs)has been of importance to enhance the properties of Al-based alloys.However,the quantification of Al_(2) Cu IMCs with diversified morphologies is st...Controlling the morphology of Al_(2) Cu intermetallic compounds(IMCs)has been of importance to enhance the properties of Al-based alloys.However,the quantification of Al_(2) Cu IMCs with diversified morphologies is still lacking,and the morphological evolution of Al_(2) Cu dendrites remains poorly understood.Using synchrotron X-ray tomography,we have directly quantified the morphological evolution of proeutectic Al_(2) Cu IMCs in directionally solidified Al-Cu alloys.The three-dimensional(3D)morphologies of Al_(2) Cu IMCs under different growth rates were quantified using volume,specific surface area,interconnectivity,tortuosity,and Gaussian curvature.The faceted morphology under slow growth rate was divided into three different types,including single hollow prism,irregular prism lacking partial faces,and coalesced prism consisting of two adjacent crystals.The morphological transition from faceted prism to non-faceted algae-like,irregular tree-like,and typically dendritic shapes with increasing growth rates was determined,reflecting the growth modes varied from lateral mode to intermediary and continuous modes.The non-faceted Al_(2) Cu dendrite had one primary stem,three groups of secondary arms,and a faceted tip.The angles between secondary arms were 120°,and the tip consisted of(011)and(011^(-))planes.This work provides a deep understanding of the formation and growth of complex IMCs in metallic alloys.展开更多
Nano-scale chemical inhomogeneity in surface oxide films formed on a V-and N-containing martensite stainless steel and tempering heating induced changes are investigated by a combination of synchrotron-based hard X-ra...Nano-scale chemical inhomogeneity in surface oxide films formed on a V-and N-containing martensite stainless steel and tempering heating induced changes are investigated by a combination of synchrotron-based hard X-ray Photoelectron emission spectroscopy(HAXPES)and microscopy(HAXPEEM)as well as microscopic X-ray absorption spectroscopy(μ-XAS)techniques.The results reveal the inhomogeneity in the oxide films on the micron-sized Cr_(2)N-and VN-type particles,while the inhomogeneity on the martensite matrix phase exists due to localised formation of nano-sized tempering nitride particles at 600℃.The oxide film formed on Cr_(2)N-type particles is rich in Cr_(2)O_(3) compared with that on the martensite matrix and VN-type particles.With the increase of tempering temperature,Cr_(2)O_(3) formation is faster for the oxidation of Cr in the martensite matrix than the oxidation of Cr nitride-rich particles.展开更多
Stripping injection overcomes the limitations of Liouville's theorem and is widely used for beam injection and accumulation in high-intensity synchrotrons.The interaction between the stripping foil and beam is cru...Stripping injection overcomes the limitations of Liouville's theorem and is widely used for beam injection and accumulation in high-intensity synchrotrons.The interaction between the stripping foil and beam is crucial in the study of stripping injection,particularly in low-energy stripping injection synchrotrons,such as the XiPAF synchrotron.The foil thickness is the main parameter that affects the properties of the beam after injection.The thin stripping foil is reinforced with collodion during its installation.However,the collodion on the foil surface makes it difficult to determine its equivalent thickness,because the mechanical measurements are not sufficiently reliable or convenient for continuously determining foil thickness.We propose an online stripping foil thickness measurement method based on the ionization energy loss effect,which is suitable for any foil thickness and does not require additional equipment.Experimental studies were conducted using the XiPAF synchrotron.The limitation of this method was examined,and the results were verified by comparing the experimentally obtained beam current accumulation curves with the simulation results.This confirms the accuracy and reliability of the proposed method for measuring the stripping foil thickness.展开更多
We propose a photon-photon collider based on synchrotron gamma sources driven by relativistic electron beams in hollow plasma channels.The collimated(with a divergence angle of~1 mrad)and ultrabrilliant(>10^(28)pho...We propose a photon-photon collider based on synchrotron gamma sources driven by relativistic electron beams in hollow plasma channels.The collimated(with a divergence angle of~1 mrad)and ultrabrilliant(>10^(28)photons s^(-1)·mrad^(-2)·mm^(-2)per 0.1% bandwidth at 0.6 MeV)photon beams are generated by strong electromagnetic fields induced by current filamentation instability,and up to~10^(6) Breit-Wheeler(BW)pairs can be created per shot.Notably,the usage of hollow plasma channels not only enhances synchrotron radiation,but also allows flexible control of the produced photon beams,ensuring the alignment of the two colliding beams and maximizing the two-photon BW process.This setup has the advantage of a clean background by eliminating the yield from the nonlinear BW process,and the signal-to-noise ratio is higher than 10^(2).展开更多
Magnesium(Mg)alloys typically exhibit anisotropic mechanical behaviors due to their hexagonal close-packed(hcp)crystal structures,often leading to tension-compression asymmetries.Understanding of the asymmetrical and ...Magnesium(Mg)alloys typically exhibit anisotropic mechanical behaviors due to their hexagonal close-packed(hcp)crystal structures,often leading to tension-compression asymmetries.Understanding of the asymmetrical and related deformation mechanisms is crucial for their structural applications,particularly in the lightweight transportation industries.Nevertheless,the underlying deformation mechanisms(e.g.,slip versus twinning)at each deformation stage during tension and compression have not been fully understood.In this study,we employed tensile and compressive tests on extruded Al and Mn containing Mg alloy,i.e.,an AM alloy Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca,during the synchrotron X-ray diffraction.Our results show that distinct deformation behaviors and mechanisms in tension and compression are associated with the strong texture in the extruded samples:(i)The tensile deformation is dominated by dislocation slips,with activation of non-basaland<c+a>slip,but deformation twinning is suppressed.(ii)The compressive deformation shows early-stage tensile twinning,followed by dislocation slips.Twinning induces grain reorientation,leading to significant lattice strain evolution aligned with the texture.The pronounced tension-compression asymmetry is attributed to the favorable shear stress direction formed in the twinning system during compression,which facilitates the activation of tensile twins.During tension,the strain hardening rate(SHR)drops significantly after yielding due to limited activated slip systems.In contrast,the samples under compression exhibit significant increases in SHR after yielding.During compression,dislocation multiplication dominates the initial strain hardening,while twinning progressively contributes more significantly than dislocation slip at higher strains.This study improves our understanding of the tension-compression and strain hardening asymmetries in extruded AM Mg alloys.展开更多
Perovskite solar cells(PSC)are considered as a promising photovoltaic technology due to their low cost and high efficiency exceeding 26.8%.Ultra-lightweight flexible perovskite solar cells(FPSCs)can be applied to many...Perovskite solar cells(PSC)are considered as a promising photovoltaic technology due to their low cost and high efficiency exceeding 26.8%.Ultra-lightweight flexible perovskite solar cells(FPSCs)can be applied to many fields such as architecture and portable devices.Although the photovoltaic conversion efficiency(PCE)of FPSC has exceeded 24%in the past few years,further application of FPSC is constrained by the challenges posed by limitation of critical material components.Here,we discussed recent research progress of key FPSC materials,mechanical endurance,low-temperature fabrication,etc.With the advantages of high brightness,collimation and resolution,we specially introduced the application of synchrotron radiation grazing incidence wide-angle X-ray scattering(GIWAXS)to directly observe the perovskite buried interface structure and corresponding mechanical stability of FPSCs without any damage.Finally,we summarize the challenges and propose an outlook about the large-scale preparation of efficient and stable FPSC modules.展开更多
Objective:The present study investigated the cytoprotective effects of a Pogonatherum paniceum extract prepared with 80%ethanol(PPE)using synchrotron radiation-based Fourier transform infrared(SR-FTIR)microspectroscop...Objective:The present study investigated the cytoprotective effects of a Pogonatherum paniceum extract prepared with 80%ethanol(PPE)using synchrotron radiation-based Fourier transform infrared(SR-FTIR)microspectroscopy and determined its phytochemical profile.Methods:The volatile and polyphenolic compounds in PPE were characterized using gas chromatography–mass spectrometry and liquid chromatography–mass spectrometry,respectively.The antioxidant capacity of PPE was evaluated using chemical and cell-based assays.The SR-FTIR microspectroscopy was performed to evaluate the cytoprotective effect of PPE by identifying changes in macromolecule composition in tert-butyl hydroperoxide(t BuOOH)-induced oxidative damage in RAW264.7 cells.Results:A total of 48 volatile compounds and 28 polyphenol components were found in PPE.PPE exhibited a high potential for antioxidant activity by scavenging the intracellular reactive oxygen species in t Bu OOH-induced oxidative damage in RAW264.7 cells.PPE treatment also significantly protected RAW264.7 cells against t BuOOH-induced toxicity and restored cell viability.The SR-FTIR analysis revealed that t BuOOH increased the lipid and ester lipid content in RAW264.7 cells.The PPE exerted a cytoprotective effect by decreasing the levels of lipid and ester lipid compounds that had been elevated by t BuOOH in RAW264.7 cells.These findings indicate that PPE has cytoprotective potential due to its ability to inhibit endogenous reactive oxygen species.Conclusion:This study extends the current knowledge on the phytochemistry of PPE and its antioxidant and cytoprotective effects.These findings support the use of SR-FTIR microspectroscopy to determine the cytoprotective effects of natural products.PPE extract may be a candidate compound for new therapeutics and nutraceuticals that target the prevention of oxidative stress-associated diseases.展开更多
Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and ...Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and quantifying these superstructures hinder the optimization of pyrrhotite depression in flotation processes.To address this critical issue,synchrotron X-ray powder diffraction(S-XRPD)with Rietveld refinement was employed to quantify the distribution of superstructures in the feed and flotation concentrates of a copper–gold ore.To elucidate the mechanisms influencing depression,density functional theory(DFT)calculations were conducted to explore the electronic structures and surface reactivity of the pyrrhotite superstructures toward the adsorption of water,oxygen and hydroxyl ions(OH-)as dominant species present in the flotation process.S-XRPD analysis revealed that flotation recovery rates of pyrrhotite followed the order of 4C<6C<5C.DFT calculations indicated that the Fe 3d and S 3p orbital band centers exhibited a similar trend relative to the Fermi level with 4C being the closest.The Fe3d band center suggested that the 4C structure possessed a more reactive surface toward the oxygen reduction reaction,promoting the formation of hydrophilic Fe-OH sites.The S 3p band center order also implied that xanthate on the non-magnetic 5C and 6C surfaces could oxidize to dixanthogen,increasing hydrophobicity and floatability,while 4C formed less hydrophobic metal-xanthate complexes.Adsorption energy and charge transfer analyses of water,hydroxyl ions and molecular oxygen further supported the high reactivity and hydrophilic nature of 4C pyrrhotite.The strong bonding with hydroxyl ions indicated enhanced surface passivation by hydrophilic Fe–OOH complexes,aligning with the experimentally observed flotation order(4C<6C<5C).These findings provide a compelling correlation between experimental flotation results and electronic structure calculations,delivering crucial insights for optimizing flotation processes and improving pyrrhotite depression.This breakthrough opens up new opportunities to enhance the efficiency of flotation processes in the mining industry.展开更多
The water drop penetration time(WDPT)test consists of placing water drops on a material's surface in order to evaluate how long it takes to penetrate the pores.It is used to evaluate the hydrophobicity of material...The water drop penetration time(WDPT)test consists of placing water drops on a material's surface in order to evaluate how long it takes to penetrate the pores.It is used to evaluate the hydrophobicity of materials.This study aims at investigating in more detail the soil-water interaction during the test,exposing its mechanism.For that,a model soil named Hamburg Sand was coated with a hydrophobic fluoropolymer and then a WDPT test was performed while computed tomography(CT)images were taken.Tomography experiments were performed at the P07 high-energy materials science(HEMS)beamline,operated by Helmholtz–Zentrum Hereon,at the storage ring PETRA III at the Deutsches Elektronen-Synchrotron(DESY)in Hamburg.Using synchrotron radiation,a tomogram can be obtained in about 10 min,way less time than regular laboratory X-ray sources usually owned by universities.The faster imaging enables the observation of the drop penetration during time and thus provides insight into the dynamics of the process.After that,digital discrete image correlation is performed to track the displacement of the grains throughout time.From the results one can observe that,as the drop is absorbed at the material's surface,the grains directly around the droplet base are dragged to the liquid-air interface around the drop,revealing grain kinematics during capillary interactions of the penetrating liquid and sand grains.展开更多
The deformation mechanism of glycerol plasticized poly(vinyl alcohol)(PVA)with different hydrolyses(88%,92%,98%)at elevated temperatures(60-100℃)was elucidated by in situ synchrotron radiation X-ray scattering.The vi...The deformation mechanism of glycerol plasticized poly(vinyl alcohol)(PVA)with different hydrolyses(88%,92%,98%)at elevated temperatures(60-100℃)was elucidated by in situ synchrotron radiation X-ray scattering.The vinyl acetate(VAc)in PVA acts as a non-crystalline chain defect,which significantly influences the plastic deformation and stretching-induced crystallization behavior of PVA.The key microstructural parameters of PVA during deformation,such as crystallinity(χ_(c)),lateral crystallite size(L),and long period(l),in combination with the stress-strain curves,were obtained.The experimental results show that the deformation process of the plasticized PVA film present a three-stage evolution:(i)a plastic deformation zone.The plastic deformation of the crystallite occurs as evidenced by the apparent decrease in crystallinity and lamellar reorientation induced by stretching;(ii)the stress softening zone.The decreasing trend of crystallinity becomes slow,and the long period becomes smaller,which indicates that PVA crystallization is induced by stretching;and(iii)the strain-hardening zone.There is a synergistic effect between the crystallite destruction and formation.Further research reveals that a high temperature and low degree of alcoholysis favor the stretching-induced crystallization of PVA,while the system with a high degree of alcoholysis shows significant characteristics of preferred crystal growth.展开更多
Lithium-and manganese-rich(LMR)oxide cathode materials are among the most attractive candidates for next-generation energy-storage materials owing to their anomalous capacity.However,severe Mn dissolution that occurs ...Lithium-and manganese-rich(LMR)oxide cathode materials are among the most attractive candidates for next-generation energy-storage materials owing to their anomalous capacity.However,severe Mn dissolution that occurs during long-term cycling,which leads to capacity loss,hinders their application prospects.In this study,nanoscale AlPO_(4)-coated Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2)(LMR@APO)with significantly enhanced electrochemical performance is successfully synthesized using a simple and effective sol–gel method to mitigate Mn dissolution and suppress local structural distortion at high voltages.Because of the complex evolution of the structure and oxidation state of LMR materials during electrochemical cycling,observing and analyzing them using traditional single characterization methods may be difficult.Therefore,we combine various synchrotron-based characterization techniques to conduct a detailed analysis of the electronic and coordination structures of the cathode material from the surface to the bulk.Synchrotron-based hard and soft X-ray spectroscopies are integrated to investigate the differences in O and Mn evolution between the surfaces and bulk of the cathode.Advanced synchrotron-based transmission X-ray microscopy combined with X-ray near-edge absorption-structure technology is utilized to visualize the two-dimensional nanometer-scale reactivity of the LMR cathode.The AlPO_(4)-coating layer can stabilize the surface structure of the LMR material,effectively alleviating irreversible oxygen release on the surface and preventing the dissolution of Mn^(2+)at the interface caused by side reactions after a long cycle.Therefore,the spatial reaction uniformity of Mn is enhanced by the AlPO_(4)-coating layer,and rapid capacity decay caused by Mn deactivation is prevented.The AlPO_(4)-coating method is a facile modification strategy for high-performance LMR materials.展开更多
Directional solidification of Al-15% （mass fraction） Cu alloy was investigated by in situ and real time radiography which was performed by Shanghai synchrotron radiation facility （SSRF）. The imaging results reveal...Directional solidification of Al-15% （mass fraction） Cu alloy was investigated by in situ and real time radiography which was performed by Shanghai synchrotron radiation facility （SSRF）. The imaging results reveal that columnar to equiaxed transition （CET） is provoked by external thermal disturbance. The detaching and floating of fragments of dendrite arms are the prelude of the transition when the solute boundary layer in front of the solid-liquid interface is thin. And the dendrite triangular tip is the fracture sensitive zone. When the conditions are suitable, new dendrites can sprout and grow up. This kind of dendrite has no obvious stem and is named anaxial columnar dendrites.展开更多
1 Introduction Annually laminated(varve)sedimentary deposits are considered as one of the most important archives,since they offer precise temporal information(years)in combination with high time resolutions.Bottom se...1 Introduction Annually laminated(varve)sedimentary deposits are considered as one of the most important archives,since they offer precise temporal information(years)in combination with high time resolutions.Bottom sediments of the lakes contain detailed geochemical information on展开更多
Synchrotron polychromatic X-ray microdiffraction（micro-XRD） was applied to study in situ deformation twinning of commercially AZ31（Mg-3Al-1Zn） strip subjected to uniaxial tension.The morphology and growth of twins...Synchrotron polychromatic X-ray microdiffraction（micro-XRD） was applied to study in situ deformation twinning of commercially AZ31（Mg-3Al-1Zn） strip subjected to uniaxial tension.The morphology and growth of twins were analyzed in situ under the load level from 64 to 73 MPa.The X-ray microdiffraction data,collected on beamline 12.3.2 at the Advanced Light Source,were then used to map an area of 396μm x 200μm within the region of interest.The experimental set-up and X-ray diffraction microscopy with a depth resolution allow the position and orientation of each illuminated grain to be determined at the submicron size.A list of parent grains sorted by crystallographic orientation were selected to examine their twinning behavior.The results depict twin variant selection,local misorientation fluctuation and mosaic spread for multi-twins within the same parent grain.As load increases,the amplitude of misorientation fluctuation along twin trace keeps increasing.This is attributable to the accumulation of geometrically necessary dislocations.展开更多
Methanol oxidation reaction(MOR)is a key process in direct methanol fuel cells(DMFCs),determining both energy efficiency and stability.Despite efforts,the impact of dynamic structural changes of Pt-based catalysts on ...Methanol oxidation reaction(MOR)is a key process in direct methanol fuel cells(DMFCs),determining both energy efficiency and stability.Despite efforts,the impact of dynamic structural changes of Pt-based catalysts on MOR performance remains poorly understood.Here,we report on the impact mechanism of dynamic changes on MOR performance in the Pd-Pt concave nanocubes(CNCs)system.Pt with high-index facets exposed abundant active sites for methanol oxidation,resulting in an exceptional mass activity of 0.89 A·mg_(Pt)^(-1).Pd underwent an oxidationredeposition process during MOR,dynamically restructuring the catalyst and producing a volcano-type activity.Pd^(δ+)species generated during oxidative etching promoted OH*formation,accelerating CO oxidation on Pt sites,thus mitigating poisoning.With continued cycling,redeposited Pd partially blocked Pt sites,counteracting the positive effect of the generated Pd^(δ+).The dynamic balance of Pd oxidation and redeposition governed the activity evolution while sustaining the exceptional durability of Pd-Pt CNCs during prolonged cycling.展开更多
基金supported by the Guangdong Basic and Applied Basic Research Foundation,China(No.2021B1515140007).
文摘The rapid cycling synchrotron(RCS)at the China spallation neutron source operates as a high-intensity proton accelerator.The coupled bunch instability was observed during RCS beam commissioning,which significantly limited the beam power.To investigate the dynamics of instability under an increased beam power,a pulsed octupole magnet with a gradient of 900 T/m^(3) was developed.The magnet system integrated an octupole magnet with a pulsed power supply.The field was carefully measured to examine the performance before its installation into the tunnel.After the installation of the magnets,beam measurements were performed to confirm the effectiveness of the instability mitigation on an actual proton beam.The measurement results show that the instability can be suppressed using the pulsed octupole magnet,particularly at the highenergy stage in an acceleration cycle,meeting the requirements for stable operation of the accelerator.Additionally,when the instability is completely suppressed through chromaticity optimization,octupole magnets can significantly enhance the RCS transmission efficiency,which is crucial for controlling beam loss.The pulsed octupole magnet offers significant progress in beam stability in the RCS,providing valuable experience for further beam power enhancement.
基金supported by the National Natural Science Foundation of China-Distinguished Young Scholars(No.52325407)the National Natural Science Foundation of China-Key Program(No.52234010)the Open Research Fund of the State Key Laboratory of Rolling and Automation,Northeastern University(No.2022RALKFKT004).
文摘Laser additive manufacturing(LAM)has been widely used in high-end manufacturing fields such as aerospace,nuclear power,and shipbuilding.However,it is a grand challenge for direct and continuous observation of complex laser-matter interaction,melt flow,and defect formation during LAM due to extremely large temperature gradient,fast cooling rate,and small time(millisecond)and space(micron)scales.The emergence of synchrotron radiation provides a feasible approach for in situ observation of the LAM process.This paper outlines the current development in real-time characterization of LAM by synchrotron radiation,including laser-matter interaction,molten pool evolution,solidification structure evolution,and defects formation and elimination.Furthermore,the future development direction and application-oriented research are also discussed.
基金supported by the National Natural Science Foundation of China-Outstanding Young Scholars(No.52325407)the National Natural Science Foundation of China(No.51904187)+1 种基金the Project funded by China Postdoctoral Science Foundation(No.2022M712919)the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515140124).
文摘Controlling the morphology of Al_(2) Cu intermetallic compounds(IMCs)has been of importance to enhance the properties of Al-based alloys.However,the quantification of Al_(2) Cu IMCs with diversified morphologies is still lacking,and the morphological evolution of Al_(2) Cu dendrites remains poorly understood.Using synchrotron X-ray tomography,we have directly quantified the morphological evolution of proeutectic Al_(2) Cu IMCs in directionally solidified Al-Cu alloys.The three-dimensional(3D)morphologies of Al_(2) Cu IMCs under different growth rates were quantified using volume,specific surface area,interconnectivity,tortuosity,and Gaussian curvature.The faceted morphology under slow growth rate was divided into three different types,including single hollow prism,irregular prism lacking partial faces,and coalesced prism consisting of two adjacent crystals.The morphological transition from faceted prism to non-faceted algae-like,irregular tree-like,and typically dendritic shapes with increasing growth rates was determined,reflecting the growth modes varied from lateral mode to intermediary and continuous modes.The non-faceted Al_(2) Cu dendrite had one primary stem,three groups of secondary arms,and a faceted tip.The angles between secondary arms were 120°,and the tip consisted of(011)and(011^(-))planes.This work provides a deep understanding of the formation and growth of complex IMCs in metallic alloys.
基金supported by the Vinnova(project number 2020-03778)supported by the Swedish Research Council(Vetenskapsradet,project number 2021-04157).
文摘Nano-scale chemical inhomogeneity in surface oxide films formed on a V-and N-containing martensite stainless steel and tempering heating induced changes are investigated by a combination of synchrotron-based hard X-ray Photoelectron emission spectroscopy(HAXPES)and microscopy(HAXPEEM)as well as microscopic X-ray absorption spectroscopy(μ-XAS)techniques.The results reveal the inhomogeneity in the oxide films on the micron-sized Cr_(2)N-and VN-type particles,while the inhomogeneity on the martensite matrix phase exists due to localised formation of nano-sized tempering nitride particles at 600℃.The oxide film formed on Cr_(2)N-type particles is rich in Cr_(2)O_(3) compared with that on the martensite matrix and VN-type particles.With the increase of tempering temperature,Cr_(2)O_(3) formation is faster for the oxidation of Cr in the martensite matrix than the oxidation of Cr nitride-rich particles.
文摘Stripping injection overcomes the limitations of Liouville's theorem and is widely used for beam injection and accumulation in high-intensity synchrotrons.The interaction between the stripping foil and beam is crucial in the study of stripping injection,particularly in low-energy stripping injection synchrotrons,such as the XiPAF synchrotron.The foil thickness is the main parameter that affects the properties of the beam after injection.The thin stripping foil is reinforced with collodion during its installation.However,the collodion on the foil surface makes it difficult to determine its equivalent thickness,because the mechanical measurements are not sufficiently reliable or convenient for continuously determining foil thickness.We propose an online stripping foil thickness measurement method based on the ionization energy loss effect,which is suitable for any foil thickness and does not require additional equipment.Experimental studies were conducted using the XiPAF synchrotron.The limitation of this method was examined,and the results were verified by comparing the experimentally obtained beam current accumulation curves with the simulation results.This confirms the accuracy and reliability of the proposed method for measuring the stripping foil thickness.
基金supported by the Fund of the National Key Laboratory of Plasma Physics(Grant No.6142A04230204)the National Natural Science Foundation of China(Project No.12075046).
文摘We propose a photon-photon collider based on synchrotron gamma sources driven by relativistic electron beams in hollow plasma channels.The collimated(with a divergence angle of~1 mrad)and ultrabrilliant(>10^(28)photons s^(-1)·mrad^(-2)·mm^(-2)per 0.1% bandwidth at 0.6 MeV)photon beams are generated by strong electromagnetic fields induced by current filamentation instability,and up to~10^(6) Breit-Wheeler(BW)pairs can be created per shot.Notably,the usage of hollow plasma channels not only enhances synchrotron radiation,but also allows flexible control of the produced photon beams,ensuring the alignment of the two colliding beams and maximizing the two-photon BW process.This setup has the advantage of a clean background by eliminating the yield from the nonlinear BW process,and the signal-to-noise ratio is higher than 10^(2).
文摘Magnesium(Mg)alloys typically exhibit anisotropic mechanical behaviors due to their hexagonal close-packed(hcp)crystal structures,often leading to tension-compression asymmetries.Understanding of the asymmetrical and related deformation mechanisms is crucial for their structural applications,particularly in the lightweight transportation industries.Nevertheless,the underlying deformation mechanisms(e.g.,slip versus twinning)at each deformation stage during tension and compression have not been fully understood.In this study,we employed tensile and compressive tests on extruded Al and Mn containing Mg alloy,i.e.,an AM alloy Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca,during the synchrotron X-ray diffraction.Our results show that distinct deformation behaviors and mechanisms in tension and compression are associated with the strong texture in the extruded samples:(i)The tensile deformation is dominated by dislocation slips,with activation of non-basaland<c+a>slip,but deformation twinning is suppressed.(ii)The compressive deformation shows early-stage tensile twinning,followed by dislocation slips.Twinning induces grain reorientation,leading to significant lattice strain evolution aligned with the texture.The pronounced tension-compression asymmetry is attributed to the favorable shear stress direction formed in the twinning system during compression,which facilitates the activation of tensile twins.During tension,the strain hardening rate(SHR)drops significantly after yielding due to limited activated slip systems.In contrast,the samples under compression exhibit significant increases in SHR after yielding.During compression,dislocation multiplication dominates the initial strain hardening,while twinning progressively contributes more significantly than dislocation slip at higher strains.This study improves our understanding of the tension-compression and strain hardening asymmetries in extruded AM Mg alloys.
基金supported by Photon Science Research Center For Carbon Dioxide,Project of the National Natural Science Foundation of China(22332003)supported by the National Natural Science Foundation of China(12175298,12075309)+10 种基金the National Natural Science Foundation of China(62404176)Shanghai Science and Technology Innovation Action Plan(22JC1403800)Shanghai Municipal Science and Technology Commission(23JC1403300)2022 Self Deployed Instrument Design Project of Shanghai Advanced Research Institutethe Research Grant from the Shanghai Sailing Program(17YF1423700)Shanghai Municipal Commission for Science and Technology(20ZR1464100)Youth Innovation Promotion Association CAS(2021284)Fudan University Talent Introduction Projectthe support from the China Postdoctoral Science Foundation(2023M742732)the Postdoctoral Fellowship Program of CPSF(GZC20241303)the Fundamental Research Funds for the Central Universities(XJSJ24100)。
文摘Perovskite solar cells(PSC)are considered as a promising photovoltaic technology due to their low cost and high efficiency exceeding 26.8%.Ultra-lightweight flexible perovskite solar cells(FPSCs)can be applied to many fields such as architecture and portable devices.Although the photovoltaic conversion efficiency(PCE)of FPSC has exceeded 24%in the past few years,further application of FPSC is constrained by the challenges posed by limitation of critical material components.Here,we discussed recent research progress of key FPSC materials,mechanical endurance,low-temperature fabrication,etc.With the advantages of high brightness,collimation and resolution,we specially introduced the application of synchrotron radiation grazing incidence wide-angle X-ray scattering(GIWAXS)to directly observe the perovskite buried interface structure and corresponding mechanical stability of FPSCs without any damage.Finally,we summarize the challenges and propose an outlook about the large-scale preparation of efficient and stable FPSC modules.
基金supported by the Basic Research Fund from Thailand Science Research and Innovation through Sisaket Rajabhat University(grant number:FF.13/2564)。
文摘Objective:The present study investigated the cytoprotective effects of a Pogonatherum paniceum extract prepared with 80%ethanol(PPE)using synchrotron radiation-based Fourier transform infrared(SR-FTIR)microspectroscopy and determined its phytochemical profile.Methods:The volatile and polyphenolic compounds in PPE were characterized using gas chromatography–mass spectrometry and liquid chromatography–mass spectrometry,respectively.The antioxidant capacity of PPE was evaluated using chemical and cell-based assays.The SR-FTIR microspectroscopy was performed to evaluate the cytoprotective effect of PPE by identifying changes in macromolecule composition in tert-butyl hydroperoxide(t BuOOH)-induced oxidative damage in RAW264.7 cells.Results:A total of 48 volatile compounds and 28 polyphenol components were found in PPE.PPE exhibited a high potential for antioxidant activity by scavenging the intracellular reactive oxygen species in t Bu OOH-induced oxidative damage in RAW264.7 cells.PPE treatment also significantly protected RAW264.7 cells against t BuOOH-induced toxicity and restored cell viability.The SR-FTIR analysis revealed that t BuOOH increased the lipid and ester lipid content in RAW264.7 cells.The PPE exerted a cytoprotective effect by decreasing the levels of lipid and ester lipid compounds that had been elevated by t BuOOH in RAW264.7 cells.These findings indicate that PPE has cytoprotective potential due to its ability to inhibit endogenous reactive oxygen species.Conclusion:This study extends the current knowledge on the phytochemistry of PPE and its antioxidant and cytoprotective effects.These findings support the use of SR-FTIR microspectroscopy to determine the cytoprotective effects of natural products.PPE extract may be a candidate compound for new therapeutics and nutraceuticals that target the prevention of oxidative stress-associated diseases.
基金supported by the Australian Research Council Linkage Project(No.LP200200717)co sponsored by Newmont Corporation(United States)and Vega Industries(India)+1 种基金the Powder Diffraction Beamline at the Australia’s Nuclear Science and Technology Organisation(No.PDR19870),Australiathe Centre for Microscopy and Microanalysis at the University of Queensland(No.1366),Australia。
文摘Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and quantifying these superstructures hinder the optimization of pyrrhotite depression in flotation processes.To address this critical issue,synchrotron X-ray powder diffraction(S-XRPD)with Rietveld refinement was employed to quantify the distribution of superstructures in the feed and flotation concentrates of a copper–gold ore.To elucidate the mechanisms influencing depression,density functional theory(DFT)calculations were conducted to explore the electronic structures and surface reactivity of the pyrrhotite superstructures toward the adsorption of water,oxygen and hydroxyl ions(OH-)as dominant species present in the flotation process.S-XRPD analysis revealed that flotation recovery rates of pyrrhotite followed the order of 4C<6C<5C.DFT calculations indicated that the Fe 3d and S 3p orbital band centers exhibited a similar trend relative to the Fermi level with 4C being the closest.The Fe3d band center suggested that the 4C structure possessed a more reactive surface toward the oxygen reduction reaction,promoting the formation of hydrophilic Fe-OH sites.The S 3p band center order also implied that xanthate on the non-magnetic 5C and 6C surfaces could oxidize to dixanthogen,increasing hydrophobicity and floatability,while 4C formed less hydrophobic metal-xanthate complexes.Adsorption energy and charge transfer analyses of water,hydroxyl ions and molecular oxygen further supported the high reactivity and hydrophilic nature of 4C pyrrhotite.The strong bonding with hydroxyl ions indicated enhanced surface passivation by hydrophilic Fe–OOH complexes,aligning with the experimentally observed flotation order(4C<6C<5C).These findings provide a compelling correlation between experimental flotation results and electronic structure calculations,delivering crucial insights for optimizing flotation processes and improving pyrrhotite depression.This breakthrough opens up new opportunities to enhance the efficiency of flotation processes in the mining industry.
基金funding of this research by the German Research Foundation(Deutsche Forschungsgemeinschaft,DFG)in the framework of Research Training Group GRK 2462:Processes in natural and technical Particle-Fluid-Systems at Hamburg University of Technology(TUHH).
文摘The water drop penetration time(WDPT)test consists of placing water drops on a material's surface in order to evaluate how long it takes to penetrate the pores.It is used to evaluate the hydrophobicity of materials.This study aims at investigating in more detail the soil-water interaction during the test,exposing its mechanism.For that,a model soil named Hamburg Sand was coated with a hydrophobic fluoropolymer and then a WDPT test was performed while computed tomography(CT)images were taken.Tomography experiments were performed at the P07 high-energy materials science(HEMS)beamline,operated by Helmholtz–Zentrum Hereon,at the storage ring PETRA III at the Deutsches Elektronen-Synchrotron(DESY)in Hamburg.Using synchrotron radiation,a tomogram can be obtained in about 10 min,way less time than regular laboratory X-ray sources usually owned by universities.The faster imaging enables the observation of the drop penetration during time and thus provides insight into the dynamics of the process.After that,digital discrete image correlation is performed to track the displacement of the grains throughout time.From the results one can observe that,as the drop is absorbed at the material's surface,the grains directly around the droplet base are dragged to the liquid-air interface around the drop,revealing grain kinematics during capillary interactions of the penetrating liquid and sand grains.
基金supported by the National Natural Science Foundation of China(No.52422302)Anhui Provincial Natural Science Foundation(Nos.2308085UM02,2408055UM001,and 2308085UM04)the Major Science and Technology Project“Unveiling and Commanding”of Hefei City,Anhui Province(No.2022-SZD-005).
文摘The deformation mechanism of glycerol plasticized poly(vinyl alcohol)(PVA)with different hydrolyses(88%,92%,98%)at elevated temperatures(60-100℃)was elucidated by in situ synchrotron radiation X-ray scattering.The vinyl acetate(VAc)in PVA acts as a non-crystalline chain defect,which significantly influences the plastic deformation and stretching-induced crystallization behavior of PVA.The key microstructural parameters of PVA during deformation,such as crystallinity(χ_(c)),lateral crystallite size(L),and long period(l),in combination with the stress-strain curves,were obtained.The experimental results show that the deformation process of the plasticized PVA film present a three-stage evolution:(i)a plastic deformation zone.The plastic deformation of the crystallite occurs as evidenced by the apparent decrease in crystallinity and lamellar reorientation induced by stretching;(ii)the stress softening zone.The decreasing trend of crystallinity becomes slow,and the long period becomes smaller,which indicates that PVA crystallization is induced by stretching;and(iii)the strain-hardening zone.There is a synergistic effect between the crystallite destruction and formation.Further research reveals that a high temperature and low degree of alcoholysis favor the stretching-induced crystallization of PVA,while the system with a high degree of alcoholysis shows significant characteristics of preferred crystal growth.
基金supported by the National Key R&D Program of China(No.2022YFB3807700)National Natural Science Foundation of China(Nos.U20A20248 and 52372247)+1 种基金Shanghai Pujiang Programme(23PJD110)Science and Technology Commission of Shanghai Municipality(No.18DZ2280800)。
文摘Lithium-and manganese-rich(LMR)oxide cathode materials are among the most attractive candidates for next-generation energy-storage materials owing to their anomalous capacity.However,severe Mn dissolution that occurs during long-term cycling,which leads to capacity loss,hinders their application prospects.In this study,nanoscale AlPO_(4)-coated Li_(1.2)Ni_(0.13)Co_(0.13)Mn_(0.54)O_(2)(LMR@APO)with significantly enhanced electrochemical performance is successfully synthesized using a simple and effective sol–gel method to mitigate Mn dissolution and suppress local structural distortion at high voltages.Because of the complex evolution of the structure and oxidation state of LMR materials during electrochemical cycling,observing and analyzing them using traditional single characterization methods may be difficult.Therefore,we combine various synchrotron-based characterization techniques to conduct a detailed analysis of the electronic and coordination structures of the cathode material from the surface to the bulk.Synchrotron-based hard and soft X-ray spectroscopies are integrated to investigate the differences in O and Mn evolution between the surfaces and bulk of the cathode.Advanced synchrotron-based transmission X-ray microscopy combined with X-ray near-edge absorption-structure technology is utilized to visualize the two-dimensional nanometer-scale reactivity of the LMR cathode.The AlPO_(4)-coating layer can stabilize the surface structure of the LMR material,effectively alleviating irreversible oxygen release on the surface and preventing the dissolution of Mn^(2+)at the interface caused by side reactions after a long cycle.Therefore,the spatial reaction uniformity of Mn is enhanced by the AlPO_(4)-coating layer,and rapid capacity decay caused by Mn deactivation is prevented.The AlPO_(4)-coating method is a facile modification strategy for high-performance LMR materials.
基金Project(51001074)supported by the National Natural Science Foundation of ChinaProject(12ZR1414500)supported by Shanghai Municipal Natural Science Fund of ChinaProject(2012CB619505)supported by the National Basic Research Program of China
文摘Directional solidification of Al-15% （mass fraction） Cu alloy was investigated by in situ and real time radiography which was performed by Shanghai synchrotron radiation facility （SSRF）. The imaging results reveal that columnar to equiaxed transition （CET） is provoked by external thermal disturbance. The detaching and floating of fragments of dendrite arms are the prelude of the transition when the solute boundary layer in front of the solid-liquid interface is thin. And the dendrite triangular tip is the fracture sensitive zone. When the conditions are suitable, new dendrites can sprout and grow up. This kind of dendrite has no obvious stem and is named anaxial columnar dendrites.
基金supported by the RFBR projects 13-05-00871,14-02-00631
文摘1 Introduction Annually laminated(varve)sedimentary deposits are considered as one of the most important archives,since they offer precise temporal information(years)in combination with high time resolutions.Bottom sediments of the lakes contain detailed geochemical information on
基金Project(DP140102355)supported by the Australian Research Council(ARC)Project supported by the China Scholarship Council(CSC)
文摘Synchrotron polychromatic X-ray microdiffraction（micro-XRD） was applied to study in situ deformation twinning of commercially AZ31（Mg-3Al-1Zn） strip subjected to uniaxial tension.The morphology and growth of twins were analyzed in situ under the load level from 64 to 73 MPa.The X-ray microdiffraction data,collected on beamline 12.3.2 at the Advanced Light Source,were then used to map an area of 396μm x 200μm within the region of interest.The experimental set-up and X-ray diffraction microscopy with a depth resolution allow the position and orientation of each illuminated grain to be determined at the submicron size.A list of parent grains sorted by crystallographic orientation were selected to examine their twinning behavior.The results depict twin variant selection,local misorientation fluctuation and mosaic spread for multi-twins within the same parent grain.As load increases,the amplitude of misorientation fluctuation along twin trace keeps increasing.This is attributable to the accumulation of geometrically necessary dislocations.
基金supported by the National Natural Science Foundation of China(Nos.12222508 and 12475325)the National Key Research and Development Program of China(Nos.2024YFA1509201 and 2023YFA1506304)the beamlines BL10B(No.31131.02.HLS.PES)and BL01B(No.31131.02.HLS.IRSM)in NSRL,and BL11B(No.31124.02.SSRF.BL11B)in SSRF for synchrotron radiation measurements.
文摘Methanol oxidation reaction(MOR)is a key process in direct methanol fuel cells(DMFCs),determining both energy efficiency and stability.Despite efforts,the impact of dynamic structural changes of Pt-based catalysts on MOR performance remains poorly understood.Here,we report on the impact mechanism of dynamic changes on MOR performance in the Pd-Pt concave nanocubes(CNCs)system.Pt with high-index facets exposed abundant active sites for methanol oxidation,resulting in an exceptional mass activity of 0.89 A·mg_(Pt)^(-1).Pd underwent an oxidationredeposition process during MOR,dynamically restructuring the catalyst and producing a volcano-type activity.Pd^(δ+)species generated during oxidative etching promoted OH*formation,accelerating CO oxidation on Pt sites,thus mitigating poisoning.With continued cycling,redeposited Pd partially blocked Pt sites,counteracting the positive effect of the generated Pd^(δ+).The dynamic balance of Pd oxidation and redeposition governed the activity evolution while sustaining the exceptional durability of Pd-Pt CNCs during prolonged cycling.
