Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as ...Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as the catalysts for the synthesis of bisdihydropyrimidin -2(1H)-ones from aromatic dialdehydes,1,3-dicarbonyl compounds and urea at 90℃under solvent-free conditions.展开更多
The model for predicting vegetable pest diamondback moth was established based on E-Support Vector Regression algorithms in the multiply occurrence season of diamondback moth. The experimental data of diamondback moth...The model for predicting vegetable pest diamondback moth was established based on E-Support Vector Regression algorithms in the multiply occurrence season of diamondback moth. The experimental data of diamondback moth in Guangdong vegetable were analyzed, and the result showed that when penalty factor c was 43, kernel function parameter k was O. 2, the better prediction result could be obtained by the early warning model of E-Support Vector Regression algorithms.展开更多
A new method for the preparation of SBA-15-supported palladium catalyst for Heck reaction in supercritical carbon dioxide was presented.The newly formed SBA-15-supported palladium catalyst（Ph-SBA-15-PPh_3-Pd） exhibi...A new method for the preparation of SBA-15-supported palladium catalyst for Heck reaction in supercritical carbon dioxide was presented.The newly formed SBA-15-supported palladium catalyst（Ph-SBA-15-PPh_3-Pd） exhibited high catalytic activity for the Heck reaction of 4-nitrobromobenzene with methyl acrylate.The catalyst can be reused several times without a loss of activity.展开更多
Engineering the surface microenvironment by tuning the binary interactions between a supported metal with a secondary metal oxide(MO_(x))or support has been a common method for improving the catalytic performance of s...Engineering the surface microenvironment by tuning the binary interactions between a supported metal with a secondary metal oxide(MO_(x))or support has been a common method for improving the catalytic performance of supported metal catalysts.However,few studies have investigated the ternary interactions among the metal,MO_(x),and support.Here,we report for the first time the formation of metal-MO_(x)-support interaction(MMSI)in reducible TiO_(2)-supported PtReO_(x) catalysts,affording 87% yield and 100% ee in the tandem hydrogenation of an aqueous chiral cyclohexane-1,2-dicarboxylic acid into the corresponding diol;the catalytic activity is eight times higher than that obtained with non-reducible support counterparts in the same reaction via traditional batch synthesis with multiple steps and unfriendly reagents.Detailed experimental and computational studies suggest that the TiO_(2) crystalline phase-dependent density of the oxygen vacancies induces different Pt-ReO_(x)-TiO_(2) interactions,which dominate the electron transfer therein and tune the adsorption strength of the carbonyl moiety of the substrate/intermediate,thus promoting the hydrogenation activity and selectivity.In addition,the strong MMSI endows the optimal rutile TiO_(2) supported PtReO_(x) catalyst with an outstanding lifetime of 400 h in a fixed-bed reactor under acidic aqueous conditions and ensures efficient applications in the selective hydrogenation of aliphatic dicarboxylic acids and functional carboxylic acids.This work provides a promising strategy for the development of efficient and stable supported catalysts for the selective hydrogenation of diverse C-O and C=O bonds.展开更多
Excess phosphorus from non-point pollution sources is one of the key factors causing eutrophication in many lakes in China,so finding a cost-effective method to remove phosphorus from non-point pollution sources is ve...Excess phosphorus from non-point pollution sources is one of the key factors causing eutrophication in many lakes in China,so finding a cost-effective method to remove phosphorus from non-point pollution sources is very important for the health of the aqueous environment. Graphene was selected to support nanoscale zero-valent iron（nZVI）for phosphorus removal from synthetic rainwater runoff in this article. Compared with nZVI supported on other porous materials,graphene-supported nZVI（G-nZVI） could remove phosphorus more efficiently. The amount of nZVI in G-nZVI was an important factor in the removal of phosphorus by G-nZVI,and G-nZVI with 20 wt.% nZVI（20% G-nZVI）could remove phosphorus most efficiently. The nZVI was very stable and could disperse very well on graphene,as characterized by transmission electron microscopy（TEM） and scanning electron microscopy（SEM）. X-ray photoelectron spectroscopy（XPS）,Fourier Transform infrared spectroscopy（FT-IR） and Raman spectroscopy were used to elucidate the reaction process,and the results indicated that Fe-O-P was formed after phosphorus was adsorbed by G-nZVI. The results obtained from X-ray diffraction（XRD） indicated that the reaction product between nZVI supported on graphene and phosphorus was Fe3（PO4）2·8H2O（Vivianite）. It was confirmed that the specific reaction mechanism for the removal of phosphorus with nZVI or G-nZVI was mainly due to chemical reaction between nZVI and phosphorus.展开更多
The activated carbon-supported TiO2 nanoparticles(TiO2/AC)were prepared by a properly controlled sol-gel method.The effects of activated carbons(AC)support on inactivated properties of TiO2 nanoparticles were evaluate...The activated carbon-supported TiO2 nanoparticles(TiO2/AC)were prepared by a properly controlled sol-gel method.The effects of activated carbons(AC)support on inactivated properties of TiO2 nanoparticles were evaluated by photocatalytic inactivation experiments of Escherichia coli.The key factors affecting the inactivation effciency were investigated,including electric power of lamp, temperature,and pH values.The results show that the TiO2/AC composites have high inactivation properties of E.coli in compari...展开更多
Objective To investigate the co-effect of Demand-control-support （DCS） model and Effort-reward Imbalance （ERI） model on the risk estimation of depression in humans in comparison with the effects when they are used...Objective To investigate the co-effect of Demand-control-support （DCS） model and Effort-reward Imbalance （ERI） model on the risk estimation of depression in humans in comparison with the effects when they are used respectively. Methods A total of 3 632 males and 1 706 females from 13 factories and companies in Henan province were recruited in this cross-sectional study. Perceived job stress was evaluated with the Job Content Questionnaire and Effort-Reward Imbalance Questionnaire （Chinese version）. Depressive symptoms were assessed by using the Center for Epidemiological Studies Depression Scale （CES-D）. Results DC （demands/job control ratio） and ERI were shown to be independently associated with depressive symptoms. The outcome of low social support and overcommitment were similar. High DC and low social support （SS）, high ERI and high overcommitment, and high DC and high ERI posed greater risks of depressive symptoms than each of them did alone. ERI model and SS model seem to be effective in estimating the risk of depressive symptoms if they are used respectively. Conclusion The DC had better performance when it was used in combination with low SS. The effect on physical demands was better than on psychological demands. The combination of DCS and ERI models could improve the risk estimate of depressive symptoms in humans.展开更多
A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecula...A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.展开更多
Two and three-dimensional finite element analysis programs for pile-soil interaction are compiled. Duncan-Chang's Model is used. The construction sequence of the pier is modeled. The pile-soil interface element is...Two and three-dimensional finite element analysis programs for pile-soil interaction are compiled. Duncan-Chang's Model is used. The construction sequence of the pier is modeled. The pile-soil interface element is used. The influence of the combination type of piles on the deformation of bank slope and pile behaviour is analyzed. Different designs of a pile-supported pier are compared thoroughly. Calculation results show that the stresses and displacements of the pile are directly related to the distance from the bank slope and the direction of inclination. An inclined prop pile set in the rear platform would remarkably reduce the stresses of piles and the displacement of the pier.展开更多
This paper presents a semi-active strategy for seismic protection of a benchmark cable-stayed bridge with consideration of multiple-support excitations. In this control strategy, Magnetorheological (MR) dampers are pr...This paper presents a semi-active strategy for seismic protection of a benchmark cable-stayed bridge with consideration of multiple-support excitations. In this control strategy, Magnetorheological (MR) dampers are proposed as control devices, a LQG-clipped-optimal control algorithm is employed. An active control strategy, shown in previous researches to perform well at controlling the benchmark bridge when uniform earthquake motion was assumed, is also used in this study to control this benchmark bridge with consideration of multiple-support excitations. The performance of active control system is compared to that of the presented semi-active control strategy. Because the MR fluid damper is a con-trollable energy- dissipation device that cannot add mechanical energy to the structural system, the proposed control strategy is fail-safe in that bounded-input, bounded-output stability of the controlled structure is guaranteed. The numerical results demonstrated that the performance of the presented control design is nearly the same as that of the active control system; and that the MR dampers can effectively be used to control seismically excited cable-stayed bridges with multiple-support excitations.展开更多
The majority of this research has concentrated on developing the self-support friction stir welding（SSFSW） tool which consists of a big concave upper shoulder and a small convex lower shoulder, and procedures for ma...The majority of this research has concentrated on developing the self-support friction stir welding（SSFSW） tool which consists of a big concave upper shoulder and a small convex lower shoulder, and procedures for making reliable welds in aluminum hollow extrusion. The 5-mm-thick 6082-T6 aluminum alloy was self-support friction stir welded at a constant tool rotation speed of 800 r/min. The effect of welding speed on microstructure and mechanical properties was investigated. The results of transverse tensile test indicated that the tensile strength of joints increased and the elongation decreased with increasing welding speed. The whole values of microhardness of SSFSW joints increased with increasing welding speed from 10 to 200 mm/min. The defectfree joints were obtained at lower welding speeds and the tensile fracture was located at the heat-affected zone（HAZ） adjacent to the thermo-mechanically affected zone（TMAZ） on the advancing side. The investigation of the flow pattern of the softened metal around the SSFSW tool revealed that the flow pattern of the softened metal was driven by two shoulders and the stir pin. The failure of specimens in tension presented the ductile fracture mode.展开更多
To reveal the suitability of using mature embryos as an explant source in wheat tissue culture, mature embryos from eight common wheat cultivars （Triticum aestivum L. cv.） were cultured with or without endosperm to ...To reveal the suitability of using mature embryos as an explant source in wheat tissue culture, mature embryos from eight common wheat cultivars （Triticum aestivum L. cv.） were cultured with or without endosperm to test their efficiency of callus induction and plant regeneration. When embryos were cultured together with endosperm （endosperm-supported culture, ES）, the percentage of callus induction was significantly lower than that when embryos were cultured in the absence of endosperm （non-endosperm-supported culture, NES）. This pattern was evident in most genotypes, regardless of whether 2 or 8 mg L^-1 2,4-D was added in the NES culture. However, in ES culture, more induced calli were differentiated into distinct green spots and they further developed into plantlets. Thus, more plants were regenerated in ES culture than in the NES treatment. Most of the eight tested genotypes showed a significant difference in callus induction rate and plantlet regeneration in both ES and NES cultures. In addition, the enzymatic activity of oxalate oxidase in the callus of ES culture condition was obviously higher than that in the callus of NES culture condition, suggesting that the activity of oxalate oxidase may be a parameter for selection of calli with potential for plantlet regeneration. These results indicate that wheat mature embryos are valuable explants for highly efficient callus induction and plant regeneration, if proper treatment and medium are used.展开更多
With the aim of deep desulfurization, silica-supported polyoxometalate-based ionic liquids were successfully prepared by a one-pot hydrothermal process and employed in heterogeneous oxidative desulfurization of variou...With the aim of deep desulfurization, silica-supported polyoxometalate-based ionic liquids were successfully prepared by a one-pot hydrothermal process and employed in heterogeneous oxidative desulfurization of various sulfur compounds. The compositions and structures of the hybrid samples were characterized by various methods such as FT-IR, XPS, Raman,UV–Vis, wide-angle XRD and N2adsorption–desorption. The experimental results indicated that the hybrid materials presented a high dispersion of tungsten species and excellent catalytic activity for the removal of 4,6-dimethyldibenzothiophene without any organic solvent as extractant, and the sulfur removal could reach 100.0% under mild conditions.The catalytic performance on various substrates was also investigated in detail. After cycling seven cycles, the sulfur removal of the heterogeneous system still reached 93.0%. The GC-MS analysis results demonstrated that the sulfur compound was first adsorbed by the catalyst and subsequently oxidized to its corresponding sulfone.展开更多
A linear response history analysis method is used to determine the influence of three factors:geometric incoherency,wave-passage,and local site characteristics on the response of lnulti-support structures subjected to...A linear response history analysis method is used to determine the influence of three factors:geometric incoherency,wave-passage,and local site characteristics on the response of lnulti-support structures subjected to differential ground motions.A one-span frame and a reduced model of a 24-span bridge,located in Las Vegas,Nevada are studied,in which the influence of each of the three factors and their combinations are analyzed.It is revealed that the incoherency of earthquake ground motion can have a dramatic influence on structural response by modifying the dynamics response to uniform excitation and inducing pseudo-static response,which does not exist in structures subjected to uniform excitation.The total response when all three sources of ground motion incoherency are included is generally larger than that of uniform excitation.展开更多
Precious metal-support interaction plays an important role in thermal stability and catalytic performance of the automotive exhaust catalysts. The support is not only a cartier for active compotmds in catalysts but al...Precious metal-support interaction plays an important role in thermal stability and catalytic performance of the automotive exhaust catalysts. The support is not only a cartier for active compotmds in catalysts but also can improve the dispersion of precious metals and suppress the sintering of precious metals at high temperature; meanwhile, noble metals can also enhance the redox performance and oxygen storage capacity of support. The mechanism of metal-support interactions mainly includes electronic interaction, formation of alloy and inward diffusion of metal into the support or covered by support. The form and degree of precious metal-sup- port interaction depend on many factors, including the content of precious metal, the species of support and metal, and preparation methods. The research results about strong metal-support interaction （SMSI） gave a theory support for developing a kind of new cata- lyst with excellent performance. This paper reviewed the interaction phenomenon and mechanism of precious metals （Pt, Pd, Rh） and support such as A1203, CeO2, and CeO2-based oxides in automotive exhaust catalysts. The factors that affect SMSI and the catalysts developed by SMSI were also discussed.展开更多
In order to investigate the influence of radiation therapy after the treatment of maxillary implant-supported prostheses, 27 patients received a total of 131 implants in maxilla after oral cancer treatment and/or reco...In order to investigate the influence of radiation therapy after the treatment of maxillary implant-supported prostheses, 27 patients received a total of 131 implants in maxilla after oral cancer treatment and/or reconstructive surgery. Among them, 25 received maxillary implant-supported prostheses. The cumulative survival rates of implants and prostheses were evaluated by the product-limit-estimates method according to Kaplan-Meier. The cumulative survival rate of implants and prostheses in irradiated patients was compared with that in non-irradiated patients by statistical Log-rank test. The results showed that 112 implants were observed after implant loading. The implants cumulative survival rate was approximately 65 % for overall patients. The cumulative prosthesis successful rate was approximately 88 % for all 25 patients. Log-rank test analysis revealed that there was a significant difference in cumulative implants survival rates between non-irradiated and irradiated maxillary bone (P<0. 01). It was concluded that the implants and prostheses in irradiated patients have significantly lower survival rates than in non-irradiated patients.展开更多
In the present study,CNFs,ZnO and Al2O3 were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction.The examined supports were charac...In the present study,CNFs,ZnO and Al2O3 were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction.The examined supports were characterized by SEM,NH3-TPD and N2adsorption-desorption isotherms to indicate their intrinsic characteristics.Furthermore,in order to understand the mechanism of deactivation,the resulted green oil was characterized using FTIR and SIM DIS.FTIR results confirmed the presence of more unsaturated constituents and then,more branched hydrocarbons formed upon the reaction over alumina-supported catalyst in comparison with the ones supported on CNFs and ZnO,which in turn,could block the pores mouths.Besides the limited hydrogen transfer,N2 adsorption-desorption isotherms results supported that the lowest pore diameters of Al2O3/SMFs close to the surface led to fast deactivation,compared with the other catalysts,especially at higher temperatures.展开更多
Non-hygroscopic polystyrene-supported chloroaluminate ionic liquid was prepared from the reaction of Merrifield resin with 1- methylimidazole followed by reaction with aluminum chloride. This Lewis acidic ionic liquid...Non-hygroscopic polystyrene-supported chloroaluminate ionic liquid was prepared from the reaction of Merrifield resin with 1- methylimidazole followed by reaction with aluminum chloride. This Lewis acidic ionic liquid is environmentally friendly heterogeneous catalyst for the Knoevenagel condensation of aromatic and aliphatic aldehydes with ethyl cyanoacetate. The catalyst is sta^le （as a bench top catalyst） and reusable.展开更多
In order to study the infl uence of the ground motion spatial eff ect on the seismic response of large span spatial structures with isolation bearings, a single-layer cylindrical latticed shell scale model with a simi...In order to study the infl uence of the ground motion spatial eff ect on the seismic response of large span spatial structures with isolation bearings, a single-layer cylindrical latticed shell scale model with a similarity ratio of 1/10 was constructed. An earthquake simulation shaking table test on the response under multiple-support excitations was performed with the high-position seismic isolation method using high damping rubber (HDR) bearings. Small-amplitude sinusoidal waves and seismic wave records with various spectral characteristics were applied to the model. The dynamic characteristics of the model and the seismic isolation eff ect on it were analyzed at varying apparent wave velocities, namely infi nitely great, 1000 m/s, 500 m/s and 250 m/s. Besides, numerical simulations were carried out by Matlab software. According to the comparison results, the numerical results agreed well with the experimental data. Moreover, the results showed that the latticed shell roof exhibited a translational motion as a rigid body after the installation of the HDR bearings with a much lower natural frequency, higher damping ratio and only 1/2~1/8 of the acceleration response peak values. Meanwhile, the structural responses and the bearing deformations at the output end of the seismic waves were greatly increased under multiple-support excitations.展开更多
文摘Silica-supported tin chloride and titanium tetrachloride were prepared by the reaction of tin chloride and titanium tetrachloride with activated silica gel in refluxing toluene.These solid acids have been employed as the catalysts for the synthesis of bisdihydropyrimidin -2(1H)-ones from aromatic dialdehydes,1,3-dicarbonyl compounds and urea at 90℃under solvent-free conditions.
基金Supported by Science and Technology Projects in Guangdong Province(2009CD058,2009CD078,2009CD079,2009CD080)~~
文摘The model for predicting vegetable pest diamondback moth was established based on E-Support Vector Regression algorithms in the multiply occurrence season of diamondback moth. The experimental data of diamondback moth in Guangdong vegetable were analyzed, and the result showed that when penalty factor c was 43, kernel function parameter k was O. 2, the better prediction result could be obtained by the early warning model of E-Support Vector Regression algorithms.
基金National Natural Science Foundation of China(No.20603005)the Specialized Research Fund for the Doctoral Program of Higher Education(No.20090041110012) for their financial support
文摘A new method for the preparation of SBA-15-supported palladium catalyst for Heck reaction in supercritical carbon dioxide was presented.The newly formed SBA-15-supported palladium catalyst（Ph-SBA-15-PPh_3-Pd） exhibited high catalytic activity for the Heck reaction of 4-nitrobromobenzene with methyl acrylate.The catalyst can be reused several times without a loss of activity.
文摘Engineering the surface microenvironment by tuning the binary interactions between a supported metal with a secondary metal oxide(MO_(x))or support has been a common method for improving the catalytic performance of supported metal catalysts.However,few studies have investigated the ternary interactions among the metal,MO_(x),and support.Here,we report for the first time the formation of metal-MO_(x)-support interaction(MMSI)in reducible TiO_(2)-supported PtReO_(x) catalysts,affording 87% yield and 100% ee in the tandem hydrogenation of an aqueous chiral cyclohexane-1,2-dicarboxylic acid into the corresponding diol;the catalytic activity is eight times higher than that obtained with non-reducible support counterparts in the same reaction via traditional batch synthesis with multiple steps and unfriendly reagents.Detailed experimental and computational studies suggest that the TiO_(2) crystalline phase-dependent density of the oxygen vacancies induces different Pt-ReO_(x)-TiO_(2) interactions,which dominate the electron transfer therein and tune the adsorption strength of the carbonyl moiety of the substrate/intermediate,thus promoting the hydrogenation activity and selectivity.In addition,the strong MMSI endows the optimal rutile TiO_(2) supported PtReO_(x) catalyst with an outstanding lifetime of 400 h in a fixed-bed reactor under acidic aqueous conditions and ensures efficient applications in the selective hydrogenation of aliphatic dicarboxylic acids and functional carboxylic acids.This work provides a promising strategy for the development of efficient and stable supported catalysts for the selective hydrogenation of diverse C-O and C=O bonds.
基金supported by the Major Science and Technology Programs for Water Pollution Control and Management of China (Nos.2011ZX07301-002 and 2012ZX07205-001)
文摘Excess phosphorus from non-point pollution sources is one of the key factors causing eutrophication in many lakes in China,so finding a cost-effective method to remove phosphorus from non-point pollution sources is very important for the health of the aqueous environment. Graphene was selected to support nanoscale zero-valent iron（nZVI）for phosphorus removal from synthetic rainwater runoff in this article. Compared with nZVI supported on other porous materials,graphene-supported nZVI（G-nZVI） could remove phosphorus more efficiently. The amount of nZVI in G-nZVI was an important factor in the removal of phosphorus by G-nZVI,and G-nZVI with 20 wt.% nZVI（20% G-nZVI）could remove phosphorus most efficiently. The nZVI was very stable and could disperse very well on graphene,as characterized by transmission electron microscopy（TEM） and scanning electron microscopy（SEM）. X-ray photoelectron spectroscopy（XPS）,Fourier Transform infrared spectroscopy（FT-IR） and Raman spectroscopy were used to elucidate the reaction process,and the results indicated that Fe-O-P was formed after phosphorus was adsorbed by G-nZVI. The results obtained from X-ray diffraction（XRD） indicated that the reaction product between nZVI supported on graphene and phosphorus was Fe3（PO4）2·8H2O（Vivianite）. It was confirmed that the specific reaction mechanism for the removal of phosphorus with nZVI or G-nZVI was mainly due to chemical reaction between nZVI and phosphorus.
基金supported by the Educational and Tech-nological Department of Hunan Province(No.08B063)the Natural Science Foundation of Science and Technology Department of Hunan Government(No.2007GK3060)the Doctor Foundation of Jishou University(No.JSDXKYZZ200648).
文摘The activated carbon-supported TiO2 nanoparticles(TiO2/AC)were prepared by a properly controlled sol-gel method.The effects of activated carbons(AC)support on inactivated properties of TiO2 nanoparticles were evaluated by photocatalytic inactivation experiments of Escherichia coli.The key factors affecting the inactivation effciency were investigated,including electric power of lamp, temperature,and pH values.The results show that the TiO2/AC composites have high inactivation properties of E.coli in compari...
基金funded by Henan Provincial Health Science and Technology Key Projects(201001009)National Science and Technology Infrastructure Program(2006BAI06B 08),China
文摘Objective To investigate the co-effect of Demand-control-support （DCS） model and Effort-reward Imbalance （ERI） model on the risk estimation of depression in humans in comparison with the effects when they are used respectively. Methods A total of 3 632 males and 1 706 females from 13 factories and companies in Henan province were recruited in this cross-sectional study. Perceived job stress was evaluated with the Job Content Questionnaire and Effort-Reward Imbalance Questionnaire （Chinese version）. Depressive symptoms were assessed by using the Center for Epidemiological Studies Depression Scale （CES-D）. Results DC （demands/job control ratio） and ERI were shown to be independently associated with depressive symptoms. The outcome of low social support and overcommitment were similar. High DC and low social support （SS）, high ERI and high overcommitment, and high DC and high ERI posed greater risks of depressive symptoms than each of them did alone. ERI model and SS model seem to be effective in estimating the risk of depressive symptoms if they are used respectively. Conclusion The DC had better performance when it was used in combination with low SS. The effect on physical demands was better than on psychological demands. The combination of DCS and ERI models could improve the risk estimate of depressive symptoms in humans.
文摘A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.
基金This work was financially supported by the National Natural Science Foundation of China
文摘Two and three-dimensional finite element analysis programs for pile-soil interaction are compiled. Duncan-Chang's Model is used. The construction sequence of the pier is modeled. The pile-soil interface element is used. The influence of the combination type of piles on the deformation of bank slope and pile behaviour is analyzed. Different designs of a pile-supported pier are compared thoroughly. Calculation results show that the stresses and displacements of the pile are directly related to the distance from the bank slope and the direction of inclination. An inclined prop pile set in the rear platform would remarkably reduce the stresses of piles and the displacement of the pier.
文摘This paper presents a semi-active strategy for seismic protection of a benchmark cable-stayed bridge with consideration of multiple-support excitations. In this control strategy, Magnetorheological (MR) dampers are proposed as control devices, a LQG-clipped-optimal control algorithm is employed. An active control strategy, shown in previous researches to perform well at controlling the benchmark bridge when uniform earthquake motion was assumed, is also used in this study to control this benchmark bridge with consideration of multiple-support excitations. The performance of active control system is compared to that of the presented semi-active control strategy. Because the MR fluid damper is a con-trollable energy- dissipation device that cannot add mechanical energy to the structural system, the proposed control strategy is fail-safe in that bounded-input, bounded-output stability of the controlled structure is guaranteed. The numerical results demonstrated that the performance of the presented control design is nearly the same as that of the active control system; and that the MR dampers can effectively be used to control seismically excited cable-stayed bridges with multiple-support excitations.
基金supported by the National Natural Science Foundation of China (Nos. 50904020 and 50974046)the Fundamental Research Funds for the Central Universities (No. HIT. NSRIF. 2012007)
文摘The majority of this research has concentrated on developing the self-support friction stir welding（SSFSW） tool which consists of a big concave upper shoulder and a small convex lower shoulder, and procedures for making reliable welds in aluminum hollow extrusion. The 5-mm-thick 6082-T6 aluminum alloy was self-support friction stir welded at a constant tool rotation speed of 800 r/min. The effect of welding speed on microstructure and mechanical properties was investigated. The results of transverse tensile test indicated that the tensile strength of joints increased and the elongation decreased with increasing welding speed. The whole values of microhardness of SSFSW joints increased with increasing welding speed from 10 to 200 mm/min. The defectfree joints were obtained at lower welding speeds and the tensile fracture was located at the heat-affected zone（HAZ） adjacent to the thermo-mechanically affected zone（TMAZ） on the advancing side. The investigation of the flow pattern of the softened metal around the SSFSW tool revealed that the flow pattern of the softened metal was driven by two shoulders and the stir pin. The failure of specimens in tension presented the ductile fracture mode.
文摘To reveal the suitability of using mature embryos as an explant source in wheat tissue culture, mature embryos from eight common wheat cultivars （Triticum aestivum L. cv.） were cultured with or without endosperm to test their efficiency of callus induction and plant regeneration. When embryos were cultured together with endosperm （endosperm-supported culture, ES）, the percentage of callus induction was significantly lower than that when embryos were cultured in the absence of endosperm （non-endosperm-supported culture, NES）. This pattern was evident in most genotypes, regardless of whether 2 or 8 mg L^-1 2,4-D was added in the NES culture. However, in ES culture, more induced calli were differentiated into distinct green spots and they further developed into plantlets. Thus, more plants were regenerated in ES culture than in the NES treatment. Most of the eight tested genotypes showed a significant difference in callus induction rate and plantlet regeneration in both ES and NES cultures. In addition, the enzymatic activity of oxalate oxidase in the callus of ES culture condition was obviously higher than that in the callus of NES culture condition, suggesting that the activity of oxalate oxidase may be a parameter for selection of calli with potential for plantlet regeneration. These results indicate that wheat mature embryos are valuable explants for highly efficient callus induction and plant regeneration, if proper treatment and medium are used.
基金financially supported by the National Nature Science Foundation of China (Nos. 21776116, 21576122, 21722604)Postdoctoral Foundation of China (No. 2017M621646)+1 种基金Postdoctoral Foundation of Jiangsu Province (No. 2018K083C)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
文摘With the aim of deep desulfurization, silica-supported polyoxometalate-based ionic liquids were successfully prepared by a one-pot hydrothermal process and employed in heterogeneous oxidative desulfurization of various sulfur compounds. The compositions and structures of the hybrid samples were characterized by various methods such as FT-IR, XPS, Raman,UV–Vis, wide-angle XRD and N2adsorption–desorption. The experimental results indicated that the hybrid materials presented a high dispersion of tungsten species and excellent catalytic activity for the removal of 4,6-dimethyldibenzothiophene without any organic solvent as extractant, and the sulfur removal could reach 100.0% under mild conditions.The catalytic performance on various substrates was also investigated in detail. After cycling seven cycles, the sulfur removal of the heterogeneous system still reached 93.0%. The GC-MS analysis results demonstrated that the sulfur compound was first adsorbed by the catalyst and subsequently oxidized to its corresponding sulfone.
基金the China Scholarship Council and the Teaching and Research Award Program for Outstanding Young Teachers (TRAPOYT) in Higher Education Institutions of MOE,PRC.
文摘A linear response history analysis method is used to determine the influence of three factors:geometric incoherency,wave-passage,and local site characteristics on the response of lnulti-support structures subjected to differential ground motions.A one-span frame and a reduced model of a 24-span bridge,located in Las Vegas,Nevada are studied,in which the influence of each of the three factors and their combinations are analyzed.It is revealed that the incoherency of earthquake ground motion can have a dramatic influence on structural response by modifying the dynamics response to uniform excitation and inducing pseudo-static response,which does not exist in structures subjected to uniform excitation.The total response when all three sources of ground motion incoherency are included is generally larger than that of uniform excitation.
基金supported by National Science & Technology Pillar Program(2012BAE06B00)
文摘Precious metal-support interaction plays an important role in thermal stability and catalytic performance of the automotive exhaust catalysts. The support is not only a cartier for active compotmds in catalysts but also can improve the dispersion of precious metals and suppress the sintering of precious metals at high temperature; meanwhile, noble metals can also enhance the redox performance and oxygen storage capacity of support. The mechanism of metal-support interactions mainly includes electronic interaction, formation of alloy and inward diffusion of metal into the support or covered by support. The form and degree of precious metal-sup- port interaction depend on many factors, including the content of precious metal, the species of support and metal, and preparation methods. The research results about strong metal-support interaction （SMSI） gave a theory support for developing a kind of new cata- lyst with excellent performance. This paper reviewed the interaction phenomenon and mechanism of precious metals （Pt, Pd, Rh） and support such as A1203, CeO2, and CeO2-based oxides in automotive exhaust catalysts. The factors that affect SMSI and the catalysts developed by SMSI were also discussed.
文摘In order to investigate the influence of radiation therapy after the treatment of maxillary implant-supported prostheses, 27 patients received a total of 131 implants in maxilla after oral cancer treatment and/or reconstructive surgery. Among them, 25 received maxillary implant-supported prostheses. The cumulative survival rates of implants and prostheses were evaluated by the product-limit-estimates method according to Kaplan-Meier. The cumulative survival rate of implants and prostheses in irradiated patients was compared with that in non-irradiated patients by statistical Log-rank test. The results showed that 112 implants were observed after implant loading. The implants cumulative survival rate was approximately 65 % for overall patients. The cumulative prosthesis successful rate was approximately 88 % for all 25 patients. Log-rank test analysis revealed that there was a significant difference in cumulative implants survival rates between non-irradiated and irradiated maxillary bone (P<0. 01). It was concluded that the implants and prostheses in irradiated patients have significantly lower survival rates than in non-irradiated patients.
文摘In the present study,CNFs,ZnO and Al2O3 were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction.The examined supports were characterized by SEM,NH3-TPD and N2adsorption-desorption isotherms to indicate their intrinsic characteristics.Furthermore,in order to understand the mechanism of deactivation,the resulted green oil was characterized using FTIR and SIM DIS.FTIR results confirmed the presence of more unsaturated constituents and then,more branched hydrocarbons formed upon the reaction over alumina-supported catalyst in comparison with the ones supported on CNFs and ZnO,which in turn,could block the pores mouths.Besides the limited hydrogen transfer,N2 adsorption-desorption isotherms results supported that the lowest pore diameters of Al2O3/SMFs close to the surface led to fast deactivation,compared with the other catalysts,especially at higher temperatures.
基金the partial support of this study by the Shahrekord University Research Council
文摘Non-hygroscopic polystyrene-supported chloroaluminate ionic liquid was prepared from the reaction of Merrifield resin with 1- methylimidazole followed by reaction with aluminum chloride. This Lewis acidic ionic liquid is environmentally friendly heterogeneous catalyst for the Knoevenagel condensation of aromatic and aliphatic aldehydes with ethyl cyanoacetate. The catalyst is sta^le （as a bench top catalyst） and reusable.
基金National Natural Science Foundation of China under Grant No.51278008the National Key Research and Development Plan of China under Grant No.2016YFC0701103
文摘In order to study the infl uence of the ground motion spatial eff ect on the seismic response of large span spatial structures with isolation bearings, a single-layer cylindrical latticed shell scale model with a similarity ratio of 1/10 was constructed. An earthquake simulation shaking table test on the response under multiple-support excitations was performed with the high-position seismic isolation method using high damping rubber (HDR) bearings. Small-amplitude sinusoidal waves and seismic wave records with various spectral characteristics were applied to the model. The dynamic characteristics of the model and the seismic isolation eff ect on it were analyzed at varying apparent wave velocities, namely infi nitely great, 1000 m/s, 500 m/s and 250 m/s. Besides, numerical simulations were carried out by Matlab software. According to the comparison results, the numerical results agreed well with the experimental data. Moreover, the results showed that the latticed shell roof exhibited a translational motion as a rigid body after the installation of the HDR bearings with a much lower natural frequency, higher damping ratio and only 1/2~1/8 of the acceleration response peak values. Meanwhile, the structural responses and the bearing deformations at the output end of the seismic waves were greatly increased under multiple-support excitations.
