Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer ...Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.展开更多
The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggre...The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggregate was analyzed by molecular dynamics simulation.The diffusion coefficient and concentration distribution of SBS modified asphalt on aggregate surface are included.The simulation results show that the diffusion coefficient of the aggregate surface of SBS modified asphalt is increased by 47.6%and 70.5%respectively after 110#asphalt and 130#asphalt are pre-wetted.The concentration distribution of SBS modified asphalt on the aggregate surface after pre-wetting is more uniform.According to the results of interface energy calculation,the interface energy of SBS modified bitumen and aggregate can be increased by about 5%after pre-wetting.According to the results of molecular dynamics simulation,the pre-wetting technology can effectively improve the interface workability of SBS modified bitumen and aggregate,so as to improve the interface performance.展开更多
Burial dissolution is a critical diagenetic process influencing ultra-deep carbonate reservoir development and preservation.Artificial carbonate samples with different internal structures were prepared,and high-temper...Burial dissolution is a critical diagenetic process influencing ultra-deep carbonate reservoir development and preservation.Artificial carbonate samples with different internal structures were prepared,and high-temperature and highpressure dissolution kinetic simulations were conducted.The results demonstrate that the intensity of burial dissolution is controlled by temperature and pressure,while tectonic-fluid activity influences the development pattern of burial dissolution,ultimately determining the direction of its differential modification.Extensive burial dissolution is likely to occur primarily at relatively shallow depths,significantly influencing reservoir formation,preservation,modification,and adjustment.The development of faults facilitates the maintenance of the intensity of burial dissolution.The maximum intensity of burial dissolution occurs at the tips and overlap zones of faults and intersections of multiple faults.The larger the scale of the faults,the more conducive it is to the development of burial dissolution.Burial dissolution fosters the formation of fault networks characterized by enhanced reservoir capacity and permeability.Burial dissolution controlled by episodic tectonic-fluid activity is a plausible explanation for forming the Tarim Basin's ultra-deep fault-controlled“stringbead-like”reservoirs.展开更多
The 2025 M_(w)7.7 Myanmar earthquake highlighted the challenge of near-fault seismic intensity field reconstruction due to sparse seismic networks.To address this limitation,a framework was proposed integrating seismi...The 2025 M_(w)7.7 Myanmar earthquake highlighted the challenge of near-fault seismic intensity field reconstruction due to sparse seismic networks.To address this limitation,a framework was proposed integrating seismic wave simulation with a data-constrained finite-fault rupture model.The constraint is implemented by identifying the optimal ground motion models(GMMs)through a scoring system that selects the best-fit GMMs to mid-and far-field China Earthquake Networks Center(CENC)seismic network data;and applying the optimal GMMs to refine the rupture model parameters for near-fault intensity field simulation.The simulated near-fault seismic intensity field reproduces seismic intensities collected from Myanmar’s sparse seismic network and concentrated in≥Ⅷintensity zones within 50 km of the projected fault plane;and identifies abnormal intensity regions exhibiting≥Ⅹintensity along the Meiktila-Naypyidaw corridor and near Shwebo that are attributed to soft soil amplification effects and near-fault directivity.This framework can also be applied to post-earthquake assessments in other similar regions.展开更多
A suction casting experiment was conducted on Zr_(55)Cu_(30)Al_(10)Ni_(5)(at%)amorphous alloy.Using ProCAST software,numerical simulations were performed to analyze the filling and solidification processes.The velocit...A suction casting experiment was conducted on Zr_(55)Cu_(30)Al_(10)Ni_(5)(at%)amorphous alloy.Using ProCAST software,numerical simulations were performed to analyze the filling and solidification processes.The velocity field during the filling process and the temperature field during the solidification process of the alloy melt under different process parameters were obtained.Based on the simulation results,a Zr-based amorphous alloy micro-gear was prepared via casting.The results indicate that increasing the suction casting temperature enhances the fluidity of alloy melt but induces unstable flow rate during filling,which is detrimental to complete filling.Zr-based amorphous micro-gears with a module of 0.6 mm,a tooth top diameter of 8 mm,and 10 teeth were prepared through the suction casting.X-ray diffraction and differential scanning calorimetry analyses confirm that the fabricated micro-gear exhibits characteristic amorphous structural features,demonstrating well-defined geometrical contours and satisfactory forming completeness.展开更多
To address the limitations of existing coupling methods in aero-engine system simulation,which fail to adaptively adjust iterative parameters and coupling relationships,which can result in low efficiency and in⁃stabil...To address the limitations of existing coupling methods in aero-engine system simulation,which fail to adaptively adjust iterative parameters and coupling relationships,which can result in low efficiency and in⁃stability,this study introduces a‘Dynamic Event-Driven Co-Simulation’algorithm integrated with decision tree algorithms.This algorithm separates the overall coupling relationships and the main solver from the primary mod⁃el,utilizing a dynamic event monitoring module to adaptively adjust simulation strategies,including iteration pa⁃rameters,coupling relationships,and convergence criteria.This facilitates efficient adaptive simulations of dy⁃namic events while balancing solution accuracy and computational efficiency.The research focuses on a twinshaft turbofan engine,establishing six system-level models that encompass overall performance and various sub⁃systems based on three coupling methods,along with a multidisciplinary multi-fidelity simulation framework in⁃corporating a 3D CFD nozzle model.The study tests both model exchange and coupled simulation methods under a 14 s transient acceleration and deceleration scenario.In a 100%throttle condition,a high-fidelity nozzle model is used to analyze the sensitivity of different convergence criteria on computational efficiency and accuracy.Re⁃sults indicate that the accuracy and efficiency achieved with this method are comparable to those of PROOSIS soft⁃ware(18 s and 35 s,respectively),while being 71%more efficient than Simulink software(62 s and 120 s,re⁃spectively).Furthermore,appropriately relaxing the convergence criteria for the 0D model(from 10-6 to 10-4)while enhancing those for the 3D model(from 3000 steps to 6000 steps)can effectively balance computational accuracy and efficiency.展开更多
Al-Cu-Mg-Ag alloys have become a research hotspot because of its good heat resistance.Its excellent mechanical properties are inseparable from the regulation of the structure by researchers.The method of material stru...Al-Cu-Mg-Ag alloys have become a research hotspot because of its good heat resistance.Its excellent mechanical properties are inseparable from the regulation of the structure by researchers.The method of material structure simulation has become more and more perfect.This study employs numerical simulation to investigate the microstructure evolution of Al-Cu-Mg-Ag alloys during solidification with the aim of controlling its structure.The size distribution of Ti-containing particles in an Al-Ti-B master alloy was characterized via microstructure observation,serving as a basis for optimizing the nucleation density parameters for particles of varying radii in the phase field model.The addition of refiner inhibited the growth of dendrites and no longer produced coarse dendrites.With the increase of refiner,the grains gradually tended to form cellular morphology.The refined grains were about 100μm in size.Experimental validation of the simulated as-cast grain morphology was conducted.The samples were observed by metallographic microscope and scanning electron microscope.The addition of refiner had a significant effect on the refinement of the alloy,and the average grain size after refinement was also about 100μm.At the same time,the XRD phase identification of the alloy was carried out.The observation of the microstructure morphology under the scanning electron microscope showed that the precipitated phase was mainly concentrated on the grain boundary.The Al_(2)Cu accounted for about 5%,and the matrix phase FCC accounted for about 95%,which also corresponded well with the simulation results.展开更多
This special issue focuses on simulation optimization(SO),which combines stochastic simulation with optimization techniques to address complex decisionmaking problems under uncertainty.SO has gained increasing importa...This special issue focuses on simulation optimization(SO),which combines stochastic simulation with optimization techniques to address complex decisionmaking problems under uncertainty.SO has gained increasing importance in areas such as transportation,supply chain and manufacturing,providing solutions where traditional analytical methods may fail.Recent advances in computing,data analytics,and artificial intelligence have significantly enhanced the efficiency and capability of SO methods,enabling the development of innovative techniques.This special issue aims to highlight recent theoretical and practical advancements in SO,showcasing its potential to solve real-world problems and inspiring further research and application in this dynamic field.展开更多
In order to improve the efficiency of cloud-based web services,an improved plant growth simulation algorithm scheduling model.This model first used mathematical methods to describe the relationships between cloud-base...In order to improve the efficiency of cloud-based web services,an improved plant growth simulation algorithm scheduling model.This model first used mathematical methods to describe the relationships between cloud-based web services and the constraints of system resources.Then,a light-induced plant growth simulation algorithm was established.The performance of the algorithm was compared through several plant types,and the best plant model was selected as the setting for the system.Experimental results show that when the number of test cloud-based web services reaches 2048,the model being 2.14 times faster than PSO,2.8 times faster than the ant colony algorithm,2.9 times faster than the bee colony algorithm,and a remarkable 8.38 times faster than the genetic algorithm.展开更多
Self-assembly of block copolymers(BCPs)is highly intricate and is adsorbing extensive experimental and simulation efforts to reveal it for maximizing structural order and device performances.The coarse-grained(CG)mole...Self-assembly of block copolymers(BCPs)is highly intricate and is adsorbing extensive experimental and simulation efforts to reveal it for maximizing structural order and device performances.The coarse-grained(CG)molecular dynamics(MD)simulation offers a microscopic angle to view the self-assembly of BCPs.Although some molecular details are sacrificed during CG processes,this method exhibits remarkable computational efficiency.In this study,a comprehensive CG model for polystyrene-block-poly(2-vinylpyridine),PS-b-P2VP,one of the most extensively studied BCPs for its high Flory-Huggins interaction parameter,is constructed,with parameters optimized using target values derived from all-atom MD simulations.The CG model precisely coincides with various classical self-assembling morphologies observed in experimental studies,matching the theoretical phase diagrams.Moreover,the conformational asymmetry of the experimental phase diagram is also clearly revealed by our simulation results,and the phase boundaries obtained from simulations are highly consistent with experimental results.The CG model is expected to extend to simulate the self-assembly behaviors of other BCPs in addition to PS-b-P2VP,thus increasing understanding of the microphase separation of BCPs from the molecular level.展开更多
1Introduction Embodied Artificial Intelligence(Embodied AI)has recently become a key research focus[1].It emphasizes agents'abilities to perceive,comprehend,and act in physical worlds to complete tasks.Simulation ...1Introduction Embodied Artificial Intelligence(Embodied AI)has recently become a key research focus[1].It emphasizes agents'abilities to perceive,comprehend,and act in physical worlds to complete tasks.Simulation platforms are essential in this area,as they simulate agent behaviors in set environments and tasks,thereby accelerating algorithm validation and optimization.However,constructing such a platform presents several challenges.展开更多
The detection of unexploded ordnance(UXO)is critical for battlefield clearance and civilian safety.This study presents the development of a software for automated simulation based on the high frequency structure simul...The detection of unexploded ordnance(UXO)is critical for battlefield clearance and civilian safety.This study presents the development of a software for automated simulation based on the high frequency structure simulator(HFSS)and the MATLAB application programming interface(API),which together form the HFSS-MATLAB-API.This interface enables control over HFSS and conducts frequency-domain electromagnetic simulations for various types of UXO,including anti-tank mines,grenades,mortars,and aerial bombs.The software automates modelling,solving,data extraction,and analysis through MATLAB,enhancing the efficiency of simulation and enabling flexible settings for target models,coil parameters,and subsurface media.The research utilizes numerical simulation methods to analyze the response characteristics of different types of UXO in electromagnetic induction and explores the impact of the rotation angle of the target model on the attenuation characteristics of the measurement line.The results indicate that the electromagnetic response of UXO varies significantly based on type,burial depth,and spatial orientation.The findings provide a theoretical foundation for the electromagnetic detection,target identification,and classification of UXO.展开更多
The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope ...The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope and image processing technology were employed to achieve a quantitative grain size distribution of NiTi alloys so as to provide experimental data for molecular dynamics modeling at the atomic scale.Considering the size effect of molecular dynamics model on material properties,a reasonable modeling size was provided by taking into account three characteristic dimensions from the perspective of macro,meso,and micro scales according to the Buckinghamπtheorem.Then,the corresponding MD simulation on deformation and fracture behavior was investigated to derive a parameterized traction-separation(T-S)law,and then it was embedded into cohesive elements of finite element software.Thus,the crack propagation behavior in NiTi alloys was reproduced by the finite element method(FEM).The experimental results show that the predicted initiation fracture toughness is in good agreement with experimental data.In addition,it is found that the dynamics initiation fracture toughness increases with decreasing grain size and increasing loading velocity.展开更多
This study investigates the capabilities of a non-hydrostatic global,variable-resolution model in simulating tropical cyclone precipitation,with historically significant Typhoon Fitow(1323)as a case study.Employing th...This study investigates the capabilities of a non-hydrostatic global,variable-resolution model in simulating tropical cyclone precipitation,with historically significant Typhoon Fitow(1323)as a case study.Employing three grid settings(24 km,60−10 km,60−3 km)and two microphysical parameterization schemes(WSM6 and Thompson),the study investigates the influence of grid resolution and microphysical parameterization on precipitation simulation.The simulated precipitation intensity and spatial distribution of high-resolution grids exhibit better agreement with the observations compared to the coarse-resolution grids.Specifically,the 60−3 km grid setting shows the greatest improvement in spatial correlation with observed precipitation data compared to the 24 km grid.Through the analysis of the thermal dynamic field,the high-resolution grid configuration more effectively simulates indicators for strong convective weather events,such as convective available potential energy(CAPE),helicity,and nonadiabatic heating.Analysis of TRMM satellite observations reveals that the high-resolution grid simulation results more accurately capture the distribution characteristics of hydrometeor mixing ratio compared to the coarse-resolution grids.Differences in hydrometeor content within convective clouds are more pronounced across grid resolutions than in stratiform clouds,even with the same parameterization scheme.Additionally,at the same resolution,the disparity in ice-phase particle content between the two schemes is much greater than the disparity in liquid-phase particle content.It is also noteworthy that the WSM6 scheme delivers superior performance compared to the Thompson scheme.In summary,this study demonstrates that refining model resolution has a more significant impact on precipitation intensity than the selection of physical parameterization scheme.The Model for Prediction Across Scales(MPAS),using a high-resolution variable-resolution grid,can be effectively used for typhoon precipitation simulation research.展开更多
Land use/cover change(LUCC)constitutes the spatial and temporal patterns of ecological security,and the construction of ecological networks is an effective way to ensure ecological security.Exploring the spatial and t...Land use/cover change(LUCC)constitutes the spatial and temporal patterns of ecological security,and the construction of ecological networks is an effective way to ensure ecological security.Exploring the spatial and temporal change characteristics of ecological network and analyzing the integrated relationship between LUCC and ecological security are crucial for ensuring regional ecological security.Gansu is one of the provinces with fragile ecological environment in China,and rapid changes in land use patterns in recent decades have threatened ecological security.Therefore,taking Gansu Province as the study area,this study simulated its land use pattern in 2050 using patch-generating land use simulation(PLUS)model based on the LUCC trend from 2000 to 2020 and integrated the LUCC into morphological spatial pattern analysis(MSPA)to identify ecological sources and extract the ecological corridors to construct ecological network using circuit theory.The results revealed that,according to the prediction results in 2050,the areas of cultivated land,forest land,grassland,water body,construction land,and unused land would be 63,447.52,39,510.80,148,115.18,4605.21,8368.89,and 161,752.40 km^(2),respectively.The number of ecological sources in Gansu Province would increase to 80,with a total area of 99,927.18 km^(2).The number of ecological corridors would increase to 191,with an estimated total length of 6120.66 km.Both ecological sources and ecological corridors showed a sparse distribution in the northwest and dense distribution in the southeast of the province at the spatial scale.The number of ecological pinch points would reach 312 and the total area would expect to increase to 842.84 km^(2),with the most pronounced increase in the Longdong region.Compared with 2020,the number and area of ecological barriers in 2050 would decrease significantly by 63 and 370.71 km^(2),respectively.In general,based on the prediction results,the connectivity of ecological network of Gansu Province would increase in 2050.To achieve the predicted ecological network in 2050,emphasis should be placed on the protection of cultivated land and ecological land,the establishment of ecological sources in desert areas,the reinforcement of the protection for existing ecological sources,and the construction of ecological corridors to enhance the stability of ecological network.This study provides valuable theoretical support and references for the future construction of ecological networks and regional land resource management decision-making.展开更多
The phase-field method is used to study the free dendritic crystal growth under forced convection with hypergravity,the hypergravity term is introduced into the liquid-phase momentum equation to examine the dendritic ...The phase-field method is used to study the free dendritic crystal growth under forced convection with hypergravity,the hypergravity term is introduced into the liquid-phase momentum equation to examine the dendritic growth.The paper focuses on the morphology of dendrite growth as well as the tip radius of the upstream dendritic arm and the average growth velocity of dendrite tips under different hypergravity levels.The results show that the morphology of dendrite changes significantly under represent simulation conditions when the hypergravity reaches 35_(g0),the upstream dendritic arm will bifurcate and the horizontal dendrite arms gradually tilt upwards.This change is mainly caused by the hypergravity and flow changing the temperature field near the dendrite interface.In addition,before the morphology of the dendrite is significantly altered,the radius of the tip of the dendrite upstream arm becomes larger with the increase in hypergravity,and the average growth velocity will increase linearly with it.The morphology of dendritic growth under different hypergravity and the changes in the tip radius along with the average growth velocity of the upstream dendritic tip with hypergravity are given in this paper.Finally,the reasons for these phenomena are analyzed.展开更多
We propose a hybrid quantum-classical method,the quantum-enriched large eddy simulation(QELES),for simulating turbulence.The QELES combines the large-scale motion of the large eddy simulation(LES)and the subgrid motio...We propose a hybrid quantum-classical method,the quantum-enriched large eddy simulation(QELES),for simulating turbulence.The QELES combines the large-scale motion of the large eddy simulation(LES)and the subgrid motion of the incompressible Schrodinger flow(ISF).The ISF is a possible way to be simulated on a quantum computer,and it generates subgrid scale turbu-lent structures to enrich the LES field.The enriched LES field can be further used in turbulent combustion and multi-phase flows in which the subgrid scale motion plays an important role.As a conceptual study,we perform the simulations of ISF and LES separately on a classical computer to simulate decaying homogeneous isotropic turbulence.Then,the QEI ES velocity is obtained by the time matching and the spectral blending methods.The QEL ES achieves significant improvement in predicting the energy spectrum,probaility density functions of velocity and vorticity components,and velocity structure functions,and reconstructs coherent small-scales vortices in the direct numerical simulation(DNS).On the other hand,the vortices in the QELES are less elongated and tangled than those in the DNS,and the magnitude of the third-order structure function in the QELES is less than that in the DNS,due to the diferent constitutive relations in the viscous flow and ISE.展开更多
Tearing modes may play an important role in the density limit disruption.The Magnetohydrodynamic(MHD)code CLT with impurity modules is used to study the tearing mode excited and driven by impurity radiation.The impuri...Tearing modes may play an important role in the density limit disruption.The Magnetohydrodynamic(MHD)code CLT with impurity modules is used to study the tearing mode excited and driven by impurity radiation.The impurity radiation can lead to plasma contraction and local enhancement of the current density.When the locally enhanced region of the current density approaches to the resonance surface,the tearing mode can be excited,even if the tearing mode is stable in the initial equilibrium.Through a scan of the initial atomic number(Z)and impurity concentrations,it is found that impurities with different Z values exhibit similar behaviors in the radiation-driven tearing mode.The impurity radiation can drive tearing mode growth through temperature cooling near the resonance surface,and there exists a linear relationship between the temperature perturbation caused by impurity radiation and the linear growth rate of the tearing mode.Additionally,the impurity can promote the growth of magnetic islands through the radiation cooling inside the magnetic island,and there exists a correlation between the initial parameters of impurity and the width of the saturated magnetic island.展开更多
The utilization of multi-field coupling simulation methods has become a pivotal approach for the investigation of intricate fracture behavior and interaction mechanisms of rock masses in deep strata.The high temperatu...The utilization of multi-field coupling simulation methods has become a pivotal approach for the investigation of intricate fracture behavior and interaction mechanisms of rock masses in deep strata.The high temperatures,pressures and complex geological environments of deep strata frequently result in the coupling of multiple physical fields,including mechanical,thermal and hydraulic fields,during the fracturing of rocks.This review initially presents an overview of the coupling mechanisms of these physical fields,thereby elucidating the interaction processes ofmechanical,thermal,and hydraulic fields within rockmasses.Secondly,an in-depth analysis ofmulti-field coupling is conducted from both spatial and temporal perspectives,with the introduction of simulation methods for a range of scales.It emphasizes cross-scale coupling methodologies for the transfer of rock properties and physical field data,including homogenization techniques,nested coupling strategies and data-driven approaches.To address the discontinuous characteristics of the rock fracture process,the review provides a detailed explanation of continuousdiscontinuous couplingmethods,to elucidate the evolution of rock fracturing and deformationmore comprehensively.In conclusion,the review presents a summary of the principal points,challenges and future directions of multi-field coupling simulation research.It also puts forward the potential of integrating intelligent algorithms with multi-scale simulation techniques to enhance the accuracy and efficiency of multi-field coupling simulations.This offers novel insights into multi-field coupling simulation analysis in deep rock masses.展开更多
Various velocity models have been built for Southeast Qinghai-Xizang Plateau with the purpose of revealing the internal dynamics and estimating local seismic hazards.In this study,we use a 3-D full-waveform modeling p...Various velocity models have been built for Southeast Qinghai-Xizang Plateau with the purpose of revealing the internal dynamics and estimating local seismic hazards.In this study,we use a 3-D full-waveform modeling package to systematically validate three published continental-scale velocity models,that is,Shen2016,FWEA18,and USTClitho1.0,leveraging the ample datasets in Southeast Qinghai-Xizang Plateau region.Travel time residuals and waveform similarities are measured between observed empirical Green’s functions and synthetic waveforms.The results show that the Shen2016 model,derived from traditional surface wave tomography,performs best in fitting Rayleigh waves in the Southeast Qinghai-Xizang Plateau,followed by FWEA18,built from full-waveform inversion of long-period body and surface waves.The USTClitho1.0 model,although inverted from body wave datasets,is comparable with FWEA18 in fitting Rayleigh waves.The results also show that all the models are faster than the ground-truth model and show relatively large travel-time residuals and poor waveform similarities at shorter period bands,possibly caused by small-scale structural heterogeneities in the shallower crust.We further invert the time residuals for spatial velocity residuals and reveal that all three models underestimate the amplitudes of high-and low-velocity anomalies.The underestimated amplitude is up to 4%,which is non-negligible considering that the overall amplitude of anomalies is only 5%−10%in the crust.These results suggest that datasets and the inversion method are both essential to building accurate models and further refinements of these models are necessary.展开更多
基金Opening Foundation of Key Laboratory of Explosive Energy Utilization and Control,Anhui Province(BP20240104)Graduate Innovation Program of China University of Mining and Technology(2024WLJCRCZL049)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_2701)。
文摘Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.
基金Funded by the Research Funds of China University of Mining and Technology(No.102523215)。
文摘The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggregate was analyzed by molecular dynamics simulation.The diffusion coefficient and concentration distribution of SBS modified asphalt on aggregate surface are included.The simulation results show that the diffusion coefficient of the aggregate surface of SBS modified asphalt is increased by 47.6%and 70.5%respectively after 110#asphalt and 130#asphalt are pre-wetted.The concentration distribution of SBS modified asphalt on the aggregate surface after pre-wetting is more uniform.According to the results of interface energy calculation,the interface energy of SBS modified bitumen and aggregate can be increased by about 5%after pre-wetting.According to the results of molecular dynamics simulation,the pre-wetting technology can effectively improve the interface workability of SBS modified bitumen and aggregate,so as to improve the interface performance.
基金supported by the National Natural Science Foundation of China(Grant No.U21B2062)supported by the Key Laboratory for Carbonate Reservoirs of China National Petroleum Corporation。
文摘Burial dissolution is a critical diagenetic process influencing ultra-deep carbonate reservoir development and preservation.Artificial carbonate samples with different internal structures were prepared,and high-temperature and highpressure dissolution kinetic simulations were conducted.The results demonstrate that the intensity of burial dissolution is controlled by temperature and pressure,while tectonic-fluid activity influences the development pattern of burial dissolution,ultimately determining the direction of its differential modification.Extensive burial dissolution is likely to occur primarily at relatively shallow depths,significantly influencing reservoir formation,preservation,modification,and adjustment.The development of faults facilitates the maintenance of the intensity of burial dissolution.The maximum intensity of burial dissolution occurs at the tips and overlap zones of faults and intersections of multiple faults.The larger the scale of the faults,the more conducive it is to the development of burial dissolution.Burial dissolution fosters the formation of fault networks characterized by enhanced reservoir capacity and permeability.Burial dissolution controlled by episodic tectonic-fluid activity is a plausible explanation for forming the Tarim Basin's ultra-deep fault-controlled“stringbead-like”reservoirs.
基金Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration under Grant No.2023C01National Natural Science Foundation of China under Grant No.52478570Distinguished Young Scholars Program of the Natural Science Foundation of Heilongjiang Province,China under Grant No.JQ2024E002。
文摘The 2025 M_(w)7.7 Myanmar earthquake highlighted the challenge of near-fault seismic intensity field reconstruction due to sparse seismic networks.To address this limitation,a framework was proposed integrating seismic wave simulation with a data-constrained finite-fault rupture model.The constraint is implemented by identifying the optimal ground motion models(GMMs)through a scoring system that selects the best-fit GMMs to mid-and far-field China Earthquake Networks Center(CENC)seismic network data;and applying the optimal GMMs to refine the rupture model parameters for near-fault intensity field simulation.The simulated near-fault seismic intensity field reproduces seismic intensities collected from Myanmar’s sparse seismic network and concentrated in≥Ⅷintensity zones within 50 km of the projected fault plane;and identifies abnormal intensity regions exhibiting≥Ⅹintensity along the Meiktila-Naypyidaw corridor and near Shwebo that are attributed to soft soil amplification effects and near-fault directivity.This framework can also be applied to post-earthquake assessments in other similar regions.
基金National Natural Science Foundation of China(51971103)Key Research and Development Program in Gansu Province(20YF8GA052)。
文摘A suction casting experiment was conducted on Zr_(55)Cu_(30)Al_(10)Ni_(5)(at%)amorphous alloy.Using ProCAST software,numerical simulations were performed to analyze the filling and solidification processes.The velocity field during the filling process and the temperature field during the solidification process of the alloy melt under different process parameters were obtained.Based on the simulation results,a Zr-based amorphous alloy micro-gear was prepared via casting.The results indicate that increasing the suction casting temperature enhances the fluidity of alloy melt but induces unstable flow rate during filling,which is detrimental to complete filling.Zr-based amorphous micro-gears with a module of 0.6 mm,a tooth top diameter of 8 mm,and 10 teeth were prepared through the suction casting.X-ray diffraction and differential scanning calorimetry analyses confirm that the fabricated micro-gear exhibits characteristic amorphous structural features,demonstrating well-defined geometrical contours and satisfactory forming completeness.
文摘To address the limitations of existing coupling methods in aero-engine system simulation,which fail to adaptively adjust iterative parameters and coupling relationships,which can result in low efficiency and in⁃stability,this study introduces a‘Dynamic Event-Driven Co-Simulation’algorithm integrated with decision tree algorithms.This algorithm separates the overall coupling relationships and the main solver from the primary mod⁃el,utilizing a dynamic event monitoring module to adaptively adjust simulation strategies,including iteration pa⁃rameters,coupling relationships,and convergence criteria.This facilitates efficient adaptive simulations of dy⁃namic events while balancing solution accuracy and computational efficiency.The research focuses on a twinshaft turbofan engine,establishing six system-level models that encompass overall performance and various sub⁃systems based on three coupling methods,along with a multidisciplinary multi-fidelity simulation framework in⁃corporating a 3D CFD nozzle model.The study tests both model exchange and coupled simulation methods under a 14 s transient acceleration and deceleration scenario.In a 100%throttle condition,a high-fidelity nozzle model is used to analyze the sensitivity of different convergence criteria on computational efficiency and accuracy.Re⁃sults indicate that the accuracy and efficiency achieved with this method are comparable to those of PROOSIS soft⁃ware(18 s and 35 s,respectively),while being 71%more efficient than Simulink software(62 s and 120 s,re⁃spectively).Furthermore,appropriately relaxing the convergence criteria for the 0D model(from 10-6 to 10-4)while enhancing those for the 3D model(from 3000 steps to 6000 steps)can effectively balance computational accuracy and efficiency.
文摘Al-Cu-Mg-Ag alloys have become a research hotspot because of its good heat resistance.Its excellent mechanical properties are inseparable from the regulation of the structure by researchers.The method of material structure simulation has become more and more perfect.This study employs numerical simulation to investigate the microstructure evolution of Al-Cu-Mg-Ag alloys during solidification with the aim of controlling its structure.The size distribution of Ti-containing particles in an Al-Ti-B master alloy was characterized via microstructure observation,serving as a basis for optimizing the nucleation density parameters for particles of varying radii in the phase field model.The addition of refiner inhibited the growth of dendrites and no longer produced coarse dendrites.With the increase of refiner,the grains gradually tended to form cellular morphology.The refined grains were about 100μm in size.Experimental validation of the simulated as-cast grain morphology was conducted.The samples were observed by metallographic microscope and scanning electron microscope.The addition of refiner had a significant effect on the refinement of the alloy,and the average grain size after refinement was also about 100μm.At the same time,the XRD phase identification of the alloy was carried out.The observation of the microstructure morphology under the scanning electron microscope showed that the precipitated phase was mainly concentrated on the grain boundary.The Al_(2)Cu accounted for about 5%,and the matrix phase FCC accounted for about 95%,which also corresponded well with the simulation results.
文摘This special issue focuses on simulation optimization(SO),which combines stochastic simulation with optimization techniques to address complex decisionmaking problems under uncertainty.SO has gained increasing importance in areas such as transportation,supply chain and manufacturing,providing solutions where traditional analytical methods may fail.Recent advances in computing,data analytics,and artificial intelligence have significantly enhanced the efficiency and capability of SO methods,enabling the development of innovative techniques.This special issue aims to highlight recent theoretical and practical advancements in SO,showcasing its potential to solve real-world problems and inspiring further research and application in this dynamic field.
基金Shanxi Province Higher Education Science and Technology Innovation Fund Project(2022-676)Shanxi Soft Science Program Research Fund Project(2016041008-6)。
文摘In order to improve the efficiency of cloud-based web services,an improved plant growth simulation algorithm scheduling model.This model first used mathematical methods to describe the relationships between cloud-based web services and the constraints of system resources.Then,a light-induced plant growth simulation algorithm was established.The performance of the algorithm was compared through several plant types,and the best plant model was selected as the setting for the system.Experimental results show that when the number of test cloud-based web services reaches 2048,the model being 2.14 times faster than PSO,2.8 times faster than the ant colony algorithm,2.9 times faster than the bee colony algorithm,and a remarkable 8.38 times faster than the genetic algorithm.
基金supported by the National Natural Science Foundation of China(22438005,22108117).
文摘Self-assembly of block copolymers(BCPs)is highly intricate and is adsorbing extensive experimental and simulation efforts to reveal it for maximizing structural order and device performances.The coarse-grained(CG)molecular dynamics(MD)simulation offers a microscopic angle to view the self-assembly of BCPs.Although some molecular details are sacrificed during CG processes,this method exhibits remarkable computational efficiency.In this study,a comprehensive CG model for polystyrene-block-poly(2-vinylpyridine),PS-b-P2VP,one of the most extensively studied BCPs for its high Flory-Huggins interaction parameter,is constructed,with parameters optimized using target values derived from all-atom MD simulations.The CG model precisely coincides with various classical self-assembling morphologies observed in experimental studies,matching the theoretical phase diagrams.Moreover,the conformational asymmetry of the experimental phase diagram is also clearly revealed by our simulation results,and the phase boundaries obtained from simulations are highly consistent with experimental results.The CG model is expected to extend to simulate the self-assembly behaviors of other BCPs in addition to PS-b-P2VP,thus increasing understanding of the microphase separation of BCPs from the molecular level.
基金supported by the National Natural Science Foundation of China(Grant No.62322601).
文摘1Introduction Embodied Artificial Intelligence(Embodied AI)has recently become a key research focus[1].It emphasizes agents'abilities to perceive,comprehend,and act in physical worlds to complete tasks.Simulation platforms are essential in this area,as they simulate agent behaviors in set environments and tasks,thereby accelerating algorithm validation and optimization.However,constructing such a platform presents several challenges.
文摘The detection of unexploded ordnance(UXO)is critical for battlefield clearance and civilian safety.This study presents the development of a software for automated simulation based on the high frequency structure simulator(HFSS)and the MATLAB application programming interface(API),which together form the HFSS-MATLAB-API.This interface enables control over HFSS and conducts frequency-domain electromagnetic simulations for various types of UXO,including anti-tank mines,grenades,mortars,and aerial bombs.The software automates modelling,solving,data extraction,and analysis through MATLAB,enhancing the efficiency of simulation and enabling flexible settings for target models,coil parameters,and subsurface media.The research utilizes numerical simulation methods to analyze the response characteristics of different types of UXO in electromagnetic induction and explores the impact of the rotation angle of the target model on the attenuation characteristics of the measurement line.The results indicate that the electromagnetic response of UXO varies significantly based on type,burial depth,and spatial orientation.The findings provide a theoretical foundation for the electromagnetic detection,target identification,and classification of UXO.
基金Funded by the National Natural Science Foundation of China Academy of Engineering Physics and Jointly Setup"NSAF"Joint Fund(No.U1430119)。
文摘The multi-scale modeling combined with the cohesive zone model(CZM)and the molecular dynamics(MD)method were preformed to simulate the crack propagation in NiTi shape memory alloys(SMAs).The metallographic microscope and image processing technology were employed to achieve a quantitative grain size distribution of NiTi alloys so as to provide experimental data for molecular dynamics modeling at the atomic scale.Considering the size effect of molecular dynamics model on material properties,a reasonable modeling size was provided by taking into account three characteristic dimensions from the perspective of macro,meso,and micro scales according to the Buckinghamπtheorem.Then,the corresponding MD simulation on deformation and fracture behavior was investigated to derive a parameterized traction-separation(T-S)law,and then it was embedded into cohesive elements of finite element software.Thus,the crack propagation behavior in NiTi alloys was reproduced by the finite element method(FEM).The experimental results show that the predicted initiation fracture toughness is in good agreement with experimental data.In addition,it is found that the dynamics initiation fracture toughness increases with decreasing grain size and increasing loading velocity.
基金financially supported by the National Key Research and Development Program of China(No.2021YFC3000802)supported by the ECNU Multifunctional Platform for Innovation(001).
文摘This study investigates the capabilities of a non-hydrostatic global,variable-resolution model in simulating tropical cyclone precipitation,with historically significant Typhoon Fitow(1323)as a case study.Employing three grid settings(24 km,60−10 km,60−3 km)and two microphysical parameterization schemes(WSM6 and Thompson),the study investigates the influence of grid resolution and microphysical parameterization on precipitation simulation.The simulated precipitation intensity and spatial distribution of high-resolution grids exhibit better agreement with the observations compared to the coarse-resolution grids.Specifically,the 60−3 km grid setting shows the greatest improvement in spatial correlation with observed precipitation data compared to the 24 km grid.Through the analysis of the thermal dynamic field,the high-resolution grid configuration more effectively simulates indicators for strong convective weather events,such as convective available potential energy(CAPE),helicity,and nonadiabatic heating.Analysis of TRMM satellite observations reveals that the high-resolution grid simulation results more accurately capture the distribution characteristics of hydrometeor mixing ratio compared to the coarse-resolution grids.Differences in hydrometeor content within convective clouds are more pronounced across grid resolutions than in stratiform clouds,even with the same parameterization scheme.Additionally,at the same resolution,the disparity in ice-phase particle content between the two schemes is much greater than the disparity in liquid-phase particle content.It is also noteworthy that the WSM6 scheme delivers superior performance compared to the Thompson scheme.In summary,this study demonstrates that refining model resolution has a more significant impact on precipitation intensity than the selection of physical parameterization scheme.The Model for Prediction Across Scales(MPAS),using a high-resolution variable-resolution grid,can be effectively used for typhoon precipitation simulation research.
基金supported by the Science Fund for the Gansu Provincial Natural Science Foundation Project(22JR5RA339).
文摘Land use/cover change(LUCC)constitutes the spatial and temporal patterns of ecological security,and the construction of ecological networks is an effective way to ensure ecological security.Exploring the spatial and temporal change characteristics of ecological network and analyzing the integrated relationship between LUCC and ecological security are crucial for ensuring regional ecological security.Gansu is one of the provinces with fragile ecological environment in China,and rapid changes in land use patterns in recent decades have threatened ecological security.Therefore,taking Gansu Province as the study area,this study simulated its land use pattern in 2050 using patch-generating land use simulation(PLUS)model based on the LUCC trend from 2000 to 2020 and integrated the LUCC into morphological spatial pattern analysis(MSPA)to identify ecological sources and extract the ecological corridors to construct ecological network using circuit theory.The results revealed that,according to the prediction results in 2050,the areas of cultivated land,forest land,grassland,water body,construction land,and unused land would be 63,447.52,39,510.80,148,115.18,4605.21,8368.89,and 161,752.40 km^(2),respectively.The number of ecological sources in Gansu Province would increase to 80,with a total area of 99,927.18 km^(2).The number of ecological corridors would increase to 191,with an estimated total length of 6120.66 km.Both ecological sources and ecological corridors showed a sparse distribution in the northwest and dense distribution in the southeast of the province at the spatial scale.The number of ecological pinch points would reach 312 and the total area would expect to increase to 842.84 km^(2),with the most pronounced increase in the Longdong region.Compared with 2020,the number and area of ecological barriers in 2050 would decrease significantly by 63 and 370.71 km^(2),respectively.In general,based on the prediction results,the connectivity of ecological network of Gansu Province would increase in 2050.To achieve the predicted ecological network in 2050,emphasis should be placed on the protection of cultivated land and ecological land,the establishment of ecological sources in desert areas,the reinforcement of the protection for existing ecological sources,and the construction of ecological corridors to enhance the stability of ecological network.This study provides valuable theoretical support and references for the future construction of ecological networks and regional land resource management decision-making.
基金supported by the National Natural Science Foundation of China(Grant No.52588202)。
文摘The phase-field method is used to study the free dendritic crystal growth under forced convection with hypergravity,the hypergravity term is introduced into the liquid-phase momentum equation to examine the dendritic growth.The paper focuses on the morphology of dendrite growth as well as the tip radius of the upstream dendritic arm and the average growth velocity of dendrite tips under different hypergravity levels.The results show that the morphology of dendrite changes significantly under represent simulation conditions when the hypergravity reaches 35_(g0),the upstream dendritic arm will bifurcate and the horizontal dendrite arms gradually tilt upwards.This change is mainly caused by the hypergravity and flow changing the temperature field near the dendrite interface.In addition,before the morphology of the dendrite is significantly altered,the radius of the tip of the dendrite upstream arm becomes larger with the increase in hypergravity,and the average growth velocity will increase linearly with it.The morphology of dendritic growth under different hypergravity and the changes in the tip radius along with the average growth velocity of the upstream dendritic tip with hypergravity are given in this paper.Finally,the reasons for these phenomena are analyzed.
基金supported by the National Natural Science Foundation of China (Grant Nos.11925201,and 11988102)the National Key R&D Program of China (Grant No.2020YFE0204200)the Xplore Prize.Numerical simulations were carried out on the TH-2A supercomputer in Guangzhou,China.
文摘We propose a hybrid quantum-classical method,the quantum-enriched large eddy simulation(QELES),for simulating turbulence.The QELES combines the large-scale motion of the large eddy simulation(LES)and the subgrid motion of the incompressible Schrodinger flow(ISF).The ISF is a possible way to be simulated on a quantum computer,and it generates subgrid scale turbu-lent structures to enrich the LES field.The enriched LES field can be further used in turbulent combustion and multi-phase flows in which the subgrid scale motion plays an important role.As a conceptual study,we perform the simulations of ISF and LES separately on a classical computer to simulate decaying homogeneous isotropic turbulence.Then,the QEI ES velocity is obtained by the time matching and the spectral blending methods.The QEL ES achieves significant improvement in predicting the energy spectrum,probaility density functions of velocity and vorticity components,and velocity structure functions,and reconstructs coherent small-scales vortices in the direct numerical simulation(DNS).On the other hand,the vortices in the QELES are less elongated and tangled than those in the DNS,and the magnitude of the third-order structure function in the QELES is less than that in the DNS,due to the diferent constitutive relations in the viscous flow and ISE.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China (Nos.2019YFE03030004 and 2022YFE03100001)。
文摘Tearing modes may play an important role in the density limit disruption.The Magnetohydrodynamic(MHD)code CLT with impurity modules is used to study the tearing mode excited and driven by impurity radiation.The impurity radiation can lead to plasma contraction and local enhancement of the current density.When the locally enhanced region of the current density approaches to the resonance surface,the tearing mode can be excited,even if the tearing mode is stable in the initial equilibrium.Through a scan of the initial atomic number(Z)and impurity concentrations,it is found that impurities with different Z values exhibit similar behaviors in the radiation-driven tearing mode.The impurity radiation can drive tearing mode growth through temperature cooling near the resonance surface,and there exists a linear relationship between the temperature perturbation caused by impurity radiation and the linear growth rate of the tearing mode.Additionally,the impurity can promote the growth of magnetic islands through the radiation cooling inside the magnetic island,and there exists a correlation between the initial parameters of impurity and the width of the saturated magnetic island.
基金supported by the National Natural Science Foundation of China(Grant Nos.42477185,41602308)the Zhejiang Provincial Natural Science Foundation of China(Grant No.LY20E080005)the Postgraduate Course Construction Project of Zhejiang University of Science and Technology(Grant No.2021yjskj05).
文摘The utilization of multi-field coupling simulation methods has become a pivotal approach for the investigation of intricate fracture behavior and interaction mechanisms of rock masses in deep strata.The high temperatures,pressures and complex geological environments of deep strata frequently result in the coupling of multiple physical fields,including mechanical,thermal and hydraulic fields,during the fracturing of rocks.This review initially presents an overview of the coupling mechanisms of these physical fields,thereby elucidating the interaction processes ofmechanical,thermal,and hydraulic fields within rockmasses.Secondly,an in-depth analysis ofmulti-field coupling is conducted from both spatial and temporal perspectives,with the introduction of simulation methods for a range of scales.It emphasizes cross-scale coupling methodologies for the transfer of rock properties and physical field data,including homogenization techniques,nested coupling strategies and data-driven approaches.To address the discontinuous characteristics of the rock fracture process,the review provides a detailed explanation of continuousdiscontinuous couplingmethods,to elucidate the evolution of rock fracturing and deformationmore comprehensively.In conclusion,the review presents a summary of the principal points,challenges and future directions of multi-field coupling simulation research.It also puts forward the potential of integrating intelligent algorithms with multi-scale simulation techniques to enhance the accuracy and efficiency of multi-field coupling simulations.This offers novel insights into multi-field coupling simulation analysis in deep rock masses.
基金supported by the Special Fund of the Institute of Geophysics,China Earthquake Administration(Nos.DQJB23R28 and DQJB22K40)the National Natural Science Foundation of China(Nos.42304078,U1839210 and 42104043).
文摘Various velocity models have been built for Southeast Qinghai-Xizang Plateau with the purpose of revealing the internal dynamics and estimating local seismic hazards.In this study,we use a 3-D full-waveform modeling package to systematically validate three published continental-scale velocity models,that is,Shen2016,FWEA18,and USTClitho1.0,leveraging the ample datasets in Southeast Qinghai-Xizang Plateau region.Travel time residuals and waveform similarities are measured between observed empirical Green’s functions and synthetic waveforms.The results show that the Shen2016 model,derived from traditional surface wave tomography,performs best in fitting Rayleigh waves in the Southeast Qinghai-Xizang Plateau,followed by FWEA18,built from full-waveform inversion of long-period body and surface waves.The USTClitho1.0 model,although inverted from body wave datasets,is comparable with FWEA18 in fitting Rayleigh waves.The results also show that all the models are faster than the ground-truth model and show relatively large travel-time residuals and poor waveform similarities at shorter period bands,possibly caused by small-scale structural heterogeneities in the shallower crust.We further invert the time residuals for spatial velocity residuals and reveal that all three models underestimate the amplitudes of high-and low-velocity anomalies.The underestimated amplitude is up to 4%,which is non-negligible considering that the overall amplitude of anomalies is only 5%−10%in the crust.These results suggest that datasets and the inversion method are both essential to building accurate models and further refinements of these models are necessary.
