Nanometer TiO 2 powders were obtained from TiOSO 4 and studied by XRD, TEM and BET. The result indicated that pH and heat treatment temperature have great effects on their grain size and crystal phase structu...Nanometer TiO 2 powders were obtained from TiOSO 4 and studied by XRD, TEM and BET. The result indicated that pH and heat treatment temperature have great effects on their grain size and crystal phase structure. Annealed at 500 ℃, nanometer TiO 2 with a specific surface area of 101.39 m 2 ·g -1 and a grain size about 10 nm were obtained(pH=5); and with a specific surface area of 95.48 m 2 ·g -1 and a grain size about 30 nm were obtained(pH=10). The research indicated that crystal phase transformation of rutile at 750 ℃made great promotion in grain size growth.展开更多
Nanometer TiO 2 powders were obtained from TiOSO 4 and studied by XRD, TEM and BET. The result indicated that pH and heat treatment temperature have great effects on their grain size and crystal phase structu...Nanometer TiO 2 powders were obtained from TiOSO 4 and studied by XRD, TEM and BET. The result indicated that pH and heat treatment temperature have great effects on their grain size and crystal phase structure. Annealed at 500 ℃, nanometer TiO 2 with a specific surface area of 101.39 m 2 ·g -1 and a grain size about 10 nm were obtained(pH=5); and with a specific surface area of 95.48 m 2 ·g -1 and a grain size about 30 nm were obtained(pH=10). The research indicated that crystal phase transformation of rutile at 750 ℃made great promotion in grain size growth.展开更多
The grain growth and thermal stability of nanocrystalline Ni-TiO2composites were systematically investigated.Thenanocrystalline Ni-TiO2composites with different contents of TiO2were prepared via electroplating method ...The grain growth and thermal stability of nanocrystalline Ni-TiO2composites were systematically investigated.Thenanocrystalline Ni-TiO2composites with different contents of TiO2were prepared via electroplating method with the variation ofTiO2nano-particles concentration.The effect of TiO2content on the grain size,phase structure and microhardness was investigatedin detail.The corresponding grain growth and diffusion mechanisms during the heating process were also discussed.The optimalmicrohardness of HV50270was achieved for the composite with addition of20g/L TiO2nano-particles after annealing at400°C for90min.The calculation of the activation energy indicated that lattice diffusion dominated at high temperatures for thenanocrystalline Ni-TiO2composites.It was indicated that the increase of TiO2nano-particles content took effect on restricting thegrain growth at high temperatures by increasing the grain growth activation energy.展开更多
A convenient and scalable technique for the synthesis of rutile titanium dioxide(TiO2) nano-rods was presented by using bulk TiO2 powder, sodium hydroxide(NaOH) and distilled water as raw materials. X-ray diffraction(...A convenient and scalable technique for the synthesis of rutile titanium dioxide(TiO2) nano-rods was presented by using bulk TiO2 powder, sodium hydroxide(NaOH) and distilled water as raw materials. X-ray diffraction(XRD) and field emission scanning electron microscopy(FESEM) studies indicate that the prepared sample is crystalline and free from any impurities, however, it has no distinct shape and possesses a huge degree of agglomeration, and the average crystal size is around 40 nm. After annealing the sample at 600 °C for 2 h, it is observed through FESEM that nano-rods are formed. And XRD analysis shows that the nano-rods are single crystalline with distinct and smooth surfaces in different sizes with average length of about 1 μm and diameter of about 80 nm. Further UV-visible spectroscopy and Raman studies were conducted for the prepared sample and the band gap of the final product is found to be 3.40 eV.展开更多
TiO2 nanocrystals/graphene （TiO2/GR） composite are prepared by combining flocculation and hydrothermal reduction technology using graphite oxide and TiO2 colloid as precursors. The obtained materials are examined by...TiO2 nanocrystals/graphene （TiO2/GR） composite are prepared by combining flocculation and hydrothermal reduction technology using graphite oxide and TiO2 colloid as precursors. The obtained materials are examined by scanning electron microscopy, transition electron microscopy, X-ray diffraction, N2 adsorption desorption, and ultraviolet-visible diffuse spectroscopy. The results suggest that the presence of TiO2 nanocrystals with diameter of about 15 nm prevents GR nanosheets from agglomeration. Owing to the uniform distribution of TiO2 nanocrystals on the GR nanosheets, TiO2/GR composite exhibits stronger light absorption in the visible region, higher adsorption capacity to methylene blue and higher efficiency of charge separation and transportation compared with pure TiO2. Moreover, the TiO2/GR composite with a GR content of 30% shows higher photocatalytic removal efficiency of MB from water than that of pure TiO2 and commercial P25 under both UV and sunlight irradiation.展开更多
We have investigated creation of variable concentrations of defects on TIO2（110）-（1×1） surface by 266 nm laser using temperature programmed desorption technique. Oxygen-vacancy defects can be easily induced b...We have investigated creation of variable concentrations of defects on TIO2（110）-（1×1） surface by 266 nm laser using temperature programmed desorption technique. Oxygen-vacancy defects can be easily induced by ultraviolet light, the defects concentration has a linear dependence on power density higher than 50 mW/cm2 for 90 s irradiation. No observation of O2 molecule and Ti atom desorption suggests that UV induced defects creation on TiO2（110）-（1×1） is an effective and gentle method. With pre-dosage of thin films of water, the rate of defects creation on TiO2（110）-（1×1） is slower at least by two orders of magnitude than bare TiO2（110）-（1×1） surface. Further investigations show that water can be more easily desorbed by UV light, and thus desorption of bridging oxygen is depressed.展开更多
文摘Nanometer TiO 2 powders were obtained from TiOSO 4 and studied by XRD, TEM and BET. The result indicated that pH and heat treatment temperature have great effects on their grain size and crystal phase structure. Annealed at 500 ℃, nanometer TiO 2 with a specific surface area of 101.39 m 2 ·g -1 and a grain size about 10 nm were obtained(pH=5); and with a specific surface area of 95.48 m 2 ·g -1 and a grain size about 30 nm were obtained(pH=10). The research indicated that crystal phase transformation of rutile at 750 ℃made great promotion in grain size growth.
文摘Nanometer TiO 2 powders were obtained from TiOSO 4 and studied by XRD, TEM and BET. The result indicated that pH and heat treatment temperature have great effects on their grain size and crystal phase structure. Annealed at 500 ℃, nanometer TiO 2 with a specific surface area of 101.39 m 2 ·g -1 and a grain size about 10 nm were obtained(pH=5); and with a specific surface area of 95.48 m 2 ·g -1 and a grain size about 30 nm were obtained(pH=10). The research indicated that crystal phase transformation of rutile at 750 ℃made great promotion in grain size growth.
基金Project(51401024)supported by the National Natural Science Foundation of ChinaProject(20150942006)supported by Basic Research Program of Beijing Institute of Technology,China
文摘The grain growth and thermal stability of nanocrystalline Ni-TiO2composites were systematically investigated.Thenanocrystalline Ni-TiO2composites with different contents of TiO2were prepared via electroplating method with the variation ofTiO2nano-particles concentration.The effect of TiO2content on the grain size,phase structure and microhardness was investigatedin detail.The corresponding grain growth and diffusion mechanisms during the heating process were also discussed.The optimalmicrohardness of HV50270was achieved for the composite with addition of20g/L TiO2nano-particles after annealing at400°C for90min.The calculation of the activation energy indicated that lattice diffusion dominated at high temperatures for thenanocrystalline Ni-TiO2composites.It was indicated that the increase of TiO2nano-particles content took effect on restricting thegrain growth at high temperatures by increasing the grain growth activation energy.
基金supported by the MKE (The Ministry of Knowledge Economy)Korea Under the ITRC (Information Technology Research Centre) support program supervised by the NIPA (National IT industry Promotion Agency) (NIPA-2012-H0301-12-2009)+1 种基金supported by the Ministry of Education, Science and Technology (MEST)National Research Foundation of Korea (NRF) through the Human Resource Training Project for Regional Innovation (2012H1B8A2026212)
文摘A convenient and scalable technique for the synthesis of rutile titanium dioxide(TiO2) nano-rods was presented by using bulk TiO2 powder, sodium hydroxide(NaOH) and distilled water as raw materials. X-ray diffraction(XRD) and field emission scanning electron microscopy(FESEM) studies indicate that the prepared sample is crystalline and free from any impurities, however, it has no distinct shape and possesses a huge degree of agglomeration, and the average crystal size is around 40 nm. After annealing the sample at 600 °C for 2 h, it is observed through FESEM that nano-rods are formed. And XRD analysis shows that the nano-rods are single crystalline with distinct and smooth surfaces in different sizes with average length of about 1 μm and diameter of about 80 nm. Further UV-visible spectroscopy and Raman studies were conducted for the prepared sample and the band gap of the final product is found to be 3.40 eV.
文摘TiO2 nanocrystals/graphene （TiO2/GR） composite are prepared by combining flocculation and hydrothermal reduction technology using graphite oxide and TiO2 colloid as precursors. The obtained materials are examined by scanning electron microscopy, transition electron microscopy, X-ray diffraction, N2 adsorption desorption, and ultraviolet-visible diffuse spectroscopy. The results suggest that the presence of TiO2 nanocrystals with diameter of about 15 nm prevents GR nanosheets from agglomeration. Owing to the uniform distribution of TiO2 nanocrystals on the GR nanosheets, TiO2/GR composite exhibits stronger light absorption in the visible region, higher adsorption capacity to methylene blue and higher efficiency of charge separation and transportation compared with pure TiO2. Moreover, the TiO2/GR composite with a GR content of 30% shows higher photocatalytic removal efficiency of MB from water than that of pure TiO2 and commercial P25 under both UV and sunlight irradiation.
文摘We have investigated creation of variable concentrations of defects on TIO2（110）-（1×1） surface by 266 nm laser using temperature programmed desorption technique. Oxygen-vacancy defects can be easily induced by ultraviolet light, the defects concentration has a linear dependence on power density higher than 50 mW/cm2 for 90 s irradiation. No observation of O2 molecule and Ti atom desorption suggests that UV induced defects creation on TiO2（110）-（1×1） is an effective and gentle method. With pre-dosage of thin films of water, the rate of defects creation on TiO2（110）-（1×1） is slower at least by two orders of magnitude than bare TiO2（110）-（1×1） surface. Further investigations show that water can be more easily desorbed by UV light, and thus desorption of bridging oxygen is depressed.
