期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
X钢低MgO烧结矿生产实践
1
作者 郭存涛 芮明 +1 位作者 潘康信 李挺 《山西冶金》 CAS 2018年第5期68-69,103,共3页
通过试烧前烧结杯试验、工艺实施方案,以及生产过程跟踪等工作。从试验前后对比数据看,烧结矿转鼓强度下降了0.4%,出厂粒级质量有所改善,高炉燃料比上升了6.44 kg/t,铁水成本升高了13.64元/t,结果与预期出现了背离。
关键词 烧结 低mgo 成本
在线阅读 下载PDF
高炉使用低MgO烧结矿的工业试验
2
作者 顾平 《冶金丛刊》 2011年第1期18-20,共3页
为改善烧结矿质量,梅钢进行了一段时间的低MgO烧结矿试验。梅钢高炉配用蛇纹石使用低MgO烧结矿,降低了渣比,并改善了相关操作指标。
关键词 低mgo烧结矿 高炉 炉渣
在线阅读 下载PDF
梅钢4号高炉低MgO烧结矿工业性试验
3
作者 高伟 《梅山科技》 2011年第1期30-33,共4页
低MgO烧结矿工业性试验是通过减少烧结矿中MgO的含量,使其四元碱度下降,达到提高烧结矿强度,降低槽下返回率,同时提高入炉铁品位,降低高炉渣量的目的,有利于降低焦比。
关键词 低mgo烧结矿 基准期 试验期
在线阅读 下载PDF
降低烧结矿MgO试验研究 被引量:1
4
作者 刘佩秋 王宁 《梅山科技》 2010年第5期43-46,58,共5页
在梅钢烧结用矿条件下,进行烧结矿不同含量降MgO试验。试验表明:随着烧结矿MgO的下降,烧结矿强度和成品率提高,燃耗下降;在降低烧结矿MgO的同时提高烧结矿碱度,烧结矿强度有较大幅度的提高。
关键词 烧结矿 低mgo 碱度 烧结试验 烧结性能
在线阅读 下载PDF
MgO低碳水泥的碳化性能分析和数学模型建立 被引量:1
5
作者 杨虞琨 《粉煤灰综合利用》 CAS 2015年第1期29-32,共4页
针对目前水泥行业的高碳排放,国外提出MgO低碳水泥,它是由硅酸盐水泥、粉煤灰和活性MgO组成。本文经碳化实验表明,该水泥能够有效吸收CO2,对于低碳减排具有很好的实用意义。且可利用粉煤灰,进一步提升了能源的有效利用。同时基于Fick第... 针对目前水泥行业的高碳排放,国外提出MgO低碳水泥,它是由硅酸盐水泥、粉煤灰和活性MgO组成。本文经碳化实验表明,该水泥能够有效吸收CO2,对于低碳减排具有很好的实用意义。且可利用粉煤灰,进一步提升了能源的有效利用。同时基于Fick第一扩散定律对该水泥的碳化能力进行数学建模,具有很强的理论指导意义。 展开更多
关键词 mgo碳水泥 碳化性能 数学模型
在线阅读 下载PDF
莱钢3200m^3高炉低(MgO)生产实践 被引量:8
6
作者 汤登军 王云术 +1 位作者 王燕 郭新超 《炼铁》 北大核心 2015年第2期31-34,共4页
对莱钢3200m^3高炉低(Mg0)生产实践进行了总结。通过采取改善炉缸热状态,提高渣铁温度、减少渣中固体悬浮物,加强生产管理等措施,在(Al_2O_3)15%~16%时,(MgO)低于5%,镁铝比0.3~0.4的情况下,高炉保持了稳定顺行,燃料比稳定在515 kg/t左右... 对莱钢3200m^3高炉低(Mg0)生产实践进行了总结。通过采取改善炉缸热状态,提高渣铁温度、减少渣中固体悬浮物,加强生产管理等措施,在(Al_2O_3)15%~16%时,(MgO)低于5%,镁铝比0.3~0.4的情况下,高炉保持了稳定顺行,燃料比稳定在515 kg/t左右,实现了低成本经济冶炼的目标。 展开更多
关键词 大型高炉 (mgo) 经济冶炼
原文传递
DFT Study of Metal Atoms Adsorbed at Low-coordinated Sites of MgO (001) Surface
7
作者 徐艺军 章永凡 +1 位作者 陈文凯 李俊篯 《Chinese Journal of Structural Chemistry》 SCIE CAS CSCD 北大核心 2003年第6期700-704,共5页
The adsorption of metal atoms, Ni, Pd, Pt, Cu, Ag and Au, at low-coordinated edge and corner oxygen sites of MgO (001) surface has been studied theoretically by using density functional method with cluster models embe... The adsorption of metal atoms, Ni, Pd, Pt, Cu, Ag and Au, at low-coordinated edge and corner oxygen sites of MgO (001) surface has been studied theoretically by using density functional method with cluster models embedded in a large array of point charges. For comparison, the interaction of metal atoms with perfect regular oxygen site of MgO (001) surface was also calculated. As regards these metal atoms adsorbed at perfect oxygen sites of MgO (001) surface, Cu, Ag and Au are very weakly bonded to the surface of MgO; Ni, Pd and Pt, on the other hand, exhibit strong interactions with perfect oxygen sites of MgO (001) surface; the large adsorption energy shows that there exist strong bonds formed between these metal atoms with surface oxygen sites. For the metal atoms adsorbed at edge and corner sites, the adsorption energy is much increased, consistent with our previous study of CO and Cl2 adsorption on MgO (001) surface. This illustrates that the low-coordinated sites, especially corner site, are more advantageous positions for those metal atoms adsorbed on MgO (001) surface. The Mulliken population analysis indicates that the electron transferred from MgO to the metal atoms were increased with the decrease of the coordination numbers, which may be one of the reasons for changing catalytic efficiency and selectivity of the metal particles supported by MgO. 展开更多
关键词 DFT metal atoms low-coordinated sites mgo (001) surface
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部