In this article,we are concerned with the C^(2)estimates for the k-convex solutions of a class of degenerate k-Hessian equations on closed Hermitian manifolds,whose function in the right-hand side is relevant to the u...In this article,we are concerned with the C^(2)estimates for the k-convex solutions of a class of degenerate k-Hessian equations on closed Hermitian manifolds,whose function in the right-hand side is relevant to the unknown function and its gradient.We will get C^(0)estimate by promoting others′results,and get the“HMW estimate”of this equation such that the conditions of using blow-up analysis are satisfied,and the gradient estimate and second-order estimate will be obtained.Such an estimate will be helpful to study the existence for the solution of the equation.展开更多
We consider the multiplicity of solutions to a p(x)-Laplacian problem involving supercritical Sobolev growth via Ricceri’s principle.By means of truncation combined with De Giorgi iteration,we can extend the results ...We consider the multiplicity of solutions to a p(x)-Laplacian problem involving supercritical Sobolev growth via Ricceri’s principle.By means of truncation combined with De Giorgi iteration,we can extend the results of subcritical and critical growth to supercritical growth and obtain at least three solutions to the p(x)-Laplacian problem.展开更多
To investigate the overall performance of reverse energy bypass scramjet,firstly a variable spe⁃cific heat method combined with a chemical balance calculation module for combustion products were used to es⁃tablish a b...To investigate the overall performance of reverse energy bypass scramjet,firstly a variable spe⁃cific heat method combined with a chemical balance calculation module for combustion products were used to es⁃tablish a benchmark scramjet performance evaluation model.Based on the test data of typical flying point of Mach 7 with the altitude of 29 km,the reliability of the model was verified.The deviations of parameters such as the to⁃tal pressure loss of combustor between the model and the test data were analyzed.Furtherly,an analytical method for post-combustion magnetohydrodynamic power generation was established;by embedding the above method into the overall performance evaluation model,performance prediction considering the power generation effect was realized.Finally,based on the above model,variety regulations of the inlet and the outlet parameters of the power generation channel and performance parameters including the engine specific impulse and the unit thrust under different enthalpy extraction ratios and load factors were analyzed.It could be concluded that the model can reliably predict the variations of key parameters.As the value of the load factor increases,the value of the conduc⁃tivity required to reach the specified enthalpy extraction ratio first decreases and then increases,which is approxi⁃mately parabolic.In order to reduce the demand for the gas conductivity for MHD power generation,the load fac⁃tor should be around 0.5.When the load factor is 0.4 and the magnetic induction intensity is 2.5 T,if the enthalpy extraction ratio reaches 0.5%,the engine specific impulse performance reduces about 3.58%.展开更多
In this paper, we present a new method for reducing seismic noise while preserving structural and stratigraphic discontinuities. Structure-oriented edge-preserving smoothing requires information such as the local orie...In this paper, we present a new method for reducing seismic noise while preserving structural and stratigraphic discontinuities. Structure-oriented edge-preserving smoothing requires information such as the local orientation and edge of the reflections. The information is usually estimated from seismic data with full frequency bandwidth. When the data has a very low signal to noise ratio （SNR）, the noise usually reduces the estimation accuracy. For seismic data with extremely low SNR, the dominant frequency has higher SNR than other frequencies, so it can provide orientation and edge information more reliably than other frequencies. Orientation and edge are usually described in terms of apparent reflection dips and coherence differences, respectively. When frequency changes, both dip and coherence difference change more slowly than the seismogram itself. For this reason, dip and coherence estimated from dominant frequency data can approximately represent those of other frequency data. Ricker wavelet are widely used in seismic modeling. The Marr wavelet has the same shape as Ricker wavelets in both time and frequency domains, so the Marr wavelet transform is selected to divide seismic data into several frequency bands. Reflection apparent dip as well as the edge information can be obtained by scanning the dominant frequency data. This information can be used to selectively smooth the frequency bands （dominant, low, and high frequencies） separately by structure-oriented edge-preserving smoothing technology. The ultimate noise-suppressed seismic data is the combination of the smoothed frequency band data. Application to synthetic and real data shows the method can effectively reduce noise, preserve edges, improve trackable reflection continuity, and maintain useful information in seismic data.展开更多
A principal component analysis-cerebellar model articulation controller （PCA-CMAC） model is proposed for machine performance degradation assessment.PCA is used to feature selection,which eliminates the redundant inf...A principal component analysis-cerebellar model articulation controller （PCA-CMAC） model is proposed for machine performance degradation assessment.PCA is used to feature selection,which eliminates the redundant information among the features from the sensor signals and reduces the dimension of the input to CMAC.CMAC is used to assess degradation states quantitatively based on its local generalization ability.The implementation of the model is presented and the model is applied in a drilling machine to assess the states of the cutting tool. The results show that the model can assess the wear states quantitatively based on the normal state of the cutting tool.The influence of the quantization parameter g and the generalization parameter r in the CMAC model on the assessment results is analyzed.If g is larger,the generalization ability is better,but the difference of degradation states is not obvious.If r is smaller,the different states are distinct,but memory requirements for storing the weights are larger.The principle for selecting two parameters is that the memory storing the weights should be small while the degradation states should be easily distinguished.展开更多
[Objective] This study aimed to evaluate the environmental effects coming from land changes in Hotan oasis during 1980-2010. [Method] Based on the Driving Force-State-Response model, expert weight method and entropy m...[Objective] This study aimed to evaluate the environmental effects coming from land changes in Hotan oasis during 1980-2010. [Method] Based on the Driving Force-State-Response model, expert weight method and entropy method were used to determine weight, and then the composite indexes of environmental effects （CIE for short） were calculated. [Result] During the period from 1980 to 2010, CIE had presented a rising trend whether expert weight method or entropy method in the study area, while the CIE presents downtrend basically in lower reaches. [Conclu- sion] It was the arable land expansion in middle reaches that led to serious land degradation in lower reaches, and may endanger ecosystem safety in Hotan River green corridor. Therefore, it is suggested that the agricultural land use should be restructured, such as reducing the sown areas of some crops with large amount of water consumption. Meanwhile, the effective measures should be taken to distribute water resources and utilize them reasonably. In addition, the oasis-desert ecotone, as well as the groundwater resources, should be also protected.展开更多
Based on spatial climatic data of agriculture and the experiment data, the models of agro-ecological assessment of climate for agricultural suitability in this study were developed using the fuzzy mathematical method....Based on spatial climatic data of agriculture and the experiment data, the models of agro-ecological assessment of climate for agricultural suitability in this study were developed using the fuzzy mathematical method. Three coefficients, in- cluding the resource coefficient （Cr）, the efficiency coefficient （Ce）, and the utility co- efficient （K）, were used in the models, which were calculated based on temperature, moisture, and sunshine duration data of Guanzhong region, Shaanxi Province. The results indicated that resource coefficient was higher in west of the region than that in east, and higher in south （especially in the Central Shaanxi Plain） than that in the Weibei plateau. The value of Cr changed from 6.5 to 9.2 from north to plain area. Spatial change of efficiency coefficient was obvious, lower in the northeast than in the central plain, and the value of Ce changed from 2.3 to 6.5 from the northeast to the central plain. As for utility coefficient, it was lower in northeastern part of the Weibei plateau and in southern mountain areas than that in the central plain, showing significant latitudinal zonality. Furthermore, the value of K increased from 0.35 to 0.78 from northeast to the central plain, and decreased from 0.78 to 0.53 from the central plain to southern mountain areas. These indicated that climate resource in the central plain region was more abundant and potential, compared with other regions. GuanZhong region was classified into three larger agricultural zones and three small independent zones, according to agro-ecological assessment. Light, heat and water resources should be made use of in an efficient way in spatial allo- cation of agricultural production. For example, water facilities should also be im- proved in Weibei plateau region where highly-qualified fruit should be enhanced and fruit processing industrial chain should be shaped. Large-scale production area of wheat should be increased in central irrigation region and more vegetable bases should be developed around large and medium-scale cities. Thanks for outstanding water conservation function, the three-dimensional agriculture including medicine and other sideline production should be developed in Qinling Mountains and the special- ized commercial agriculture should be accelerated in independent small zones, ac- cording to local conditions. In the research, different crop varieties were developed in corresponding regions as per current eco-climatic conditions.展开更多
The conventional finite-element（FE） method often uses a structured mesh, which is designed according to the user’s experience, and it is not sufficiently accurate and flexible to accommodate complex structures such...The conventional finite-element（FE） method often uses a structured mesh, which is designed according to the user’s experience, and it is not sufficiently accurate and flexible to accommodate complex structures such as dipping interfaces and rough topography. We present an adaptive FE method for 2.5D forward modeling of induced polarization（IP）. In the presented method, an unstructured triangulation mesh that allows for local mesh refinement and flexible description of arbitrary model geometries is used. Furthermore, the mesh refinement process is guided by dual error estimate weighting to bias the refinement towards elements that affect the solution at the receiver locations. After the final mesh is generated, the Jacobian matrix is used to obtain the IP response on 2D structure models. We validate the adaptive FE algorithm using a vertical contact model. The validation shows that the elements near the receivers are highly refined and the average relative error of the potentials converges to 0.4 % and 1.2 % for the IP response. This suggests that the numerical solution of the adaptive FE algorithm converges to an accurate solution with the refined mesh. Finally, the accuracy and flexibility of the adaptive FE procedure are also validated using more complex models.展开更多
A stochastic finite element computational methodology for probabilistic durability assessment of deteriorating reinforced concrete（RC） bridges by considering the time-and space-dependent variabilities is presented.F...A stochastic finite element computational methodology for probabilistic durability assessment of deteriorating reinforced concrete（RC） bridges by considering the time-and space-dependent variabilities is presented.First,finite element analysis with a smeared cracking approach is implemented.The time-dependent bond-slip relationship between steel and concrete,and the stress-strain relationship of corroded steel bars are considered.Secondly,a stochastic finite element-based computational framework for reliability assessment of deteriorating RC bridges is proposed.The spatial and temporal variability of several parameters affecting the reliability of RC bridges is considered.Based on the data reported by several researchers and from field investigations,the Monte Carlo simulation is used to account for the uncertainties in various parameters,including local and general corrosion in rebars,concrete cover depth,surface chloride concentration,chloride diffusion coefficient,and corrosion rate.Finally,the proposed probabilistic durability assessment approach and framework are applied to evaluate the time-dependent reliability of a girder of a RC bridge located on the Tianjin Binhai New Area in China.展开更多
In this paper we propose an absolute error loss EB estimator for parameter of one-side truncation distribution families. Under some conditions we have proved that the convergence rates of its Bayes risk is o, where 0&...In this paper we propose an absolute error loss EB estimator for parameter of one-side truncation distribution families. Under some conditions we have proved that the convergence rates of its Bayes risk is o, where 0<λ,r≤1,Mn≤lnln n (for large n),Mn→∞ as n→∞.展开更多
In this paper, extracting parallelizatio n from the sum of disjoint products approach is discussed. A general framework of parallelizing disjoint products approach is presented. And a parallel version of the newest...In this paper, extracting parallelizatio n from the sum of disjoint products approach is discussed. A general framework of parallelizing disjoint products approach is presented. And a parallel version of the newest disjoint products algorithm is implemented. The results of testing s how the effect is so good to get linear speedups.展开更多
AIM:To evaluate the utility of assessing iodized oil uptake with cone-beam computed tomography(CT)in transarterial chemoembolization(TACE)for small he-patocellular carcinoma(HCC).METHODS:Cone-beam CT provided by a bip...AIM:To evaluate the utility of assessing iodized oil uptake with cone-beam computed tomography(CT)in transarterial chemoembolization(TACE)for small he-patocellular carcinoma(HCC).METHODS:Cone-beam CT provided by a biplane flat-panel detector angiography suite was performed on eighteen patients(sixteen men and two women;41-76 years;mean age,58.9 years)directly after TACE for small HCC(26 nodules under 30 mm;mean diam-eter,11.9 mm;range,5-28 mm).The pre-procedural locations of the tumors were evaluated using tripha-sic multi-detector row helical computed tomography(MDCT).The tumor locations on MDCT and the iodized oil uptake by the tumors were analyzed on cone-beam CT and on spot image directly after the procedures.RESULTS:All lesions on preprocedural MDCT were de-tected using iodized oil uptake in the lesions on cone-beam CT(sensitivity 100%,26/26).Spot image depictediodized oil uptake in 22 of the lesions(sensitivity 85%).The degree of iodized oil uptake was overestimated(9%,2/22)or underestimated(14%,3/22)on spot image in f ive nodules compared with that of cone-beam CT.CONCLUSION:Cone-beam CT is a useful and conve-nient tool for assessing the iodized oil uptake of small hepatic tumors(< 3 cm)directly after TACE.展开更多
Urbanization strategic environmental assessment (SEA) is an effective instrument to enhance the harmo-nious development of urban complex system, integrating of environment and development in decision-making. Ur-baniza...Urbanization strategic environmental assessment (SEA) is an effective instrument to enhance the harmo-nious development of urban complex system, integrating of environment and development in decision-making. Ur-banization strategic environmental assessment integration technology system (SEA-ITS) is composed of "3S" (RS, GIS and GPS), environmental expert system and environmental model system, coupling with appropriate SEA working process closely. In this paper, the structure and components of SEA-ITS are analyzed based on Chinese characteristics, meanwhile methods to fulfill the following system functions are discussed: urbanization SEA in-quiring, analysis, discrimination, assessment, prediction, decision-making and output. Moreover, methods and tech-nologies employed in different urbanization SEA hierarchies are summarized. As a case study, urbanization SEA-ITS is applied in Changchun City to solving complex real problems. Methods such as system dynamics and grey cluster are adopted to achieve the environmental impact assessment on the eco-industrial system planning. It is revealed that the system designed is capable of reflecting the dynamic behavior of eco-industrial system under different sce-narios, meanwhile accomplishing strategy optimization and supplying scientific reference. The 4th strategy, namely concerning on economy increase and its interaction with science, technology and environment progress, would have the best efficiency. Further, more attention should be paid to the secondary development of integration techniques and function modification system of urbanization SEA-ITS.展开更多
To get the IR spectrums of Agrimonia Pilosa Ledeb （APL） from China and Japan areas, and to fend out the characters of IR spectrums through the content of different chemical constituents, to provide a fast and effect...To get the IR spectrums of Agrimonia Pilosa Ledeb （APL） from China and Japan areas, and to fend out the characters of IR spectrums through the content of different chemical constituents, to provide a fast and effective analysis method monitor the inherent qualities of traditional Chinese medicine-APL. Fourier Transform Infrared Spectroscopy （FT-IR） was applied to detect sample of APL from Ofina and Japan areas. This study showed that the IR spectra of APL from China and Japan areas have their unique IR fingerprint features. The contents of tannin and calcitum phosphate in APL from China is different APL from Japan. So FF-IR is a very quick, effective and well repetitive method for monitoring and distinguishing the traditional Chinese medicine.展开更多
Synthesis,characterization of Co_3O_4 and Ag-Co_3O_4 composites and evaluation of their photo-catalytic activities towards photo-degradation of aqueous solution of rhodamine B dye under irradiation of visible light ha...Synthesis,characterization of Co_3O_4 and Ag-Co_3O_4 composites and evaluation of their photo-catalytic activities towards photo-degradation of aqueous solution of rhodamine B dye under irradiation of visible light have been described in this paper.Co_3O_4 was prepared by solid phase mechano chemical process using Co(NO_3)_2·6H_2O and NH_4 HCO_3 as precursor materials.Ag was deposited on Co_3O_4 from AgNO_3 using Calotropis gigantea extract as reducing agent.XRD,SEM and FTIR were used for characterization of prepared composites.Photo-catalytic efficiencies of as-prepared Co_3O_4 and Ag-Co_3O_4 were evaluated for aqueous phase photo-degradation of rhodamine B.It was found that deposition of Ag on Co_3O_4 highly enhanced the photo-catalytic activity of Co_3O_4.Photo-catalytic degradation followed the Eley–Rideal mechanism.About 100% and 91% photo-degradation of 40 ml dye solution achieved at 313 K in 90 and 120 min over 0.05 g of Ag-Co_3O_4 as photo-catalyst using 100 and 200 mg·L^(-1) as initial concentration of dye respectively.展开更多
Gracilaria lemaneiformis Bory is an economically important alga that is primarily used for agar production.Although tetraspores are ideal seeds for the cultivation of G.lemaneiformis,the most popular culture method is...Gracilaria lemaneiformis Bory is an economically important alga that is primarily used for agar production.Although tetraspores are ideal seeds for the cultivation of G.lemaneiformis,the most popular culture method is currently based on vegetative fragments,which is labor-intensive and time-consuming.In this study,we optimized the conditions for tetraspore release and evaluated the photosynthetic activities of different colonies formed from the branches of G.lemaneiformis using a PAM(pulse-amplitude-modulated) measuring system.The results showed that variations in temperature and salinityhad significant effects on tetraspore yield.However,variations in the photon flux density(from 15 μmol m-2 s-1 to 480 μmol m-2 s-1) had no apparent effect on tetraspore yield.Moreover,the PAM-parameters Y(I),Y(Ⅱ),ETR(I),ETR(Ⅱ) and Fv/Fm of colonies formed from different branches showed the same trend:parameter values of first generation branches>second generation branches>third generation branches.These results suggest that the photosynthetic activities of different colonies of branches changed with the same trend.Furthermore,photosynthesis in G.lemaneiformis was found to be involved in vegetative reproduction and tetraspore formation.Finally,the first generation branches grew slowly,but accumulated organic compounds to form large numbers of tetraspores.Taken together,these results showed that the first generation branches are ideal materials for the release of tetraspores.展开更多
文摘In this article,we are concerned with the C^(2)estimates for the k-convex solutions of a class of degenerate k-Hessian equations on closed Hermitian manifolds,whose function in the right-hand side is relevant to the unknown function and its gradient.We will get C^(0)estimate by promoting others′results,and get the“HMW estimate”of this equation such that the conditions of using blow-up analysis are satisfied,and the gradient estimate and second-order estimate will be obtained.Such an estimate will be helpful to study the existence for the solution of the equation.
基金supported by the Fundamental Research Funds for the Central Universities(2024KYJD2006).
文摘We consider the multiplicity of solutions to a p(x)-Laplacian problem involving supercritical Sobolev growth via Ricceri’s principle.By means of truncation combined with De Giorgi iteration,we can extend the results of subcritical and critical growth to supercritical growth and obtain at least three solutions to the p(x)-Laplacian problem.
文摘To investigate the overall performance of reverse energy bypass scramjet,firstly a variable spe⁃cific heat method combined with a chemical balance calculation module for combustion products were used to es⁃tablish a benchmark scramjet performance evaluation model.Based on the test data of typical flying point of Mach 7 with the altitude of 29 km,the reliability of the model was verified.The deviations of parameters such as the to⁃tal pressure loss of combustor between the model and the test data were analyzed.Furtherly,an analytical method for post-combustion magnetohydrodynamic power generation was established;by embedding the above method into the overall performance evaluation model,performance prediction considering the power generation effect was realized.Finally,based on the above model,variety regulations of the inlet and the outlet parameters of the power generation channel and performance parameters including the engine specific impulse and the unit thrust under different enthalpy extraction ratios and load factors were analyzed.It could be concluded that the model can reliably predict the variations of key parameters.As the value of the load factor increases,the value of the conduc⁃tivity required to reach the specified enthalpy extraction ratio first decreases and then increases,which is approxi⁃mately parabolic.In order to reduce the demand for the gas conductivity for MHD power generation,the load fac⁃tor should be around 0.5.When the load factor is 0.4 and the magnetic induction intensity is 2.5 T,if the enthalpy extraction ratio reaches 0.5%,the engine specific impulse performance reduces about 3.58%.
基金supported by China National Petroleum Corporation (CNPC) Innovation Fund (Grant No.07E1019)Specialized Research Fund for the Doctoral Program of Higher Education (SRFDP) (Grant No.200804251502)
文摘In this paper, we present a new method for reducing seismic noise while preserving structural and stratigraphic discontinuities. Structure-oriented edge-preserving smoothing requires information such as the local orientation and edge of the reflections. The information is usually estimated from seismic data with full frequency bandwidth. When the data has a very low signal to noise ratio （SNR）, the noise usually reduces the estimation accuracy. For seismic data with extremely low SNR, the dominant frequency has higher SNR than other frequencies, so it can provide orientation and edge information more reliably than other frequencies. Orientation and edge are usually described in terms of apparent reflection dips and coherence differences, respectively. When frequency changes, both dip and coherence difference change more slowly than the seismogram itself. For this reason, dip and coherence estimated from dominant frequency data can approximately represent those of other frequency data. Ricker wavelet are widely used in seismic modeling. The Marr wavelet has the same shape as Ricker wavelets in both time and frequency domains, so the Marr wavelet transform is selected to divide seismic data into several frequency bands. Reflection apparent dip as well as the edge information can be obtained by scanning the dominant frequency data. This information can be used to selectively smooth the frequency bands （dominant, low, and high frequencies） separately by structure-oriented edge-preserving smoothing technology. The ultimate noise-suppressed seismic data is the combination of the smoothed frequency band data. Application to synthetic and real data shows the method can effectively reduce noise, preserve edges, improve trackable reflection continuity, and maintain useful information in seismic data.
基金The National Natural Science Foundation of China(No.60443007,50390063).
文摘A principal component analysis-cerebellar model articulation controller （PCA-CMAC） model is proposed for machine performance degradation assessment.PCA is used to feature selection,which eliminates the redundant information among the features from the sensor signals and reduces the dimension of the input to CMAC.CMAC is used to assess degradation states quantitatively based on its local generalization ability.The implementation of the model is presented and the model is applied in a drilling machine to assess the states of the cutting tool. The results show that the model can assess the wear states quantitatively based on the normal state of the cutting tool.The influence of the quantization parameter g and the generalization parameter r in the CMAC model on the assessment results is analyzed.If g is larger,the generalization ability is better,but the difference of degradation states is not obvious.If r is smaller,the different states are distinct,but memory requirements for storing the weights are larger.The principle for selecting two parameters is that the memory storing the weights should be small while the degradation states should be easily distinguished.
基金Supported by Major State Basic Research Development Program of China(973 Program,2010CB955905)Fund from Hebei Normal University for Nationalities for the Research of the Temporal Evolution in Hotan Oasis with Climate Change(201304)~~
文摘[Objective] This study aimed to evaluate the environmental effects coming from land changes in Hotan oasis during 1980-2010. [Method] Based on the Driving Force-State-Response model, expert weight method and entropy method were used to determine weight, and then the composite indexes of environmental effects （CIE for short） were calculated. [Result] During the period from 1980 to 2010, CIE had presented a rising trend whether expert weight method or entropy method in the study area, while the CIE presents downtrend basically in lower reaches. [Conclu- sion] It was the arable land expansion in middle reaches that led to serious land degradation in lower reaches, and may endanger ecosystem safety in Hotan River green corridor. Therefore, it is suggested that the agricultural land use should be restructured, such as reducing the sown areas of some crops with large amount of water consumption. Meanwhile, the effective measures should be taken to distribute water resources and utilize them reasonably. In addition, the oasis-desert ecotone, as well as the groundwater resources, should be also protected.
基金National Natural Science Foundation of China(4113074841101162+2 种基金4100137441101165)Knowledge Innovation Program of the Chinese Academy of Sciences(KZCX2-YW-QN304)~~
文摘Based on spatial climatic data of agriculture and the experiment data, the models of agro-ecological assessment of climate for agricultural suitability in this study were developed using the fuzzy mathematical method. Three coefficients, in- cluding the resource coefficient （Cr）, the efficiency coefficient （Ce）, and the utility co- efficient （K）, were used in the models, which were calculated based on temperature, moisture, and sunshine duration data of Guanzhong region, Shaanxi Province. The results indicated that resource coefficient was higher in west of the region than that in east, and higher in south （especially in the Central Shaanxi Plain） than that in the Weibei plateau. The value of Cr changed from 6.5 to 9.2 from north to plain area. Spatial change of efficiency coefficient was obvious, lower in the northeast than in the central plain, and the value of Ce changed from 2.3 to 6.5 from the northeast to the central plain. As for utility coefficient, it was lower in northeastern part of the Weibei plateau and in southern mountain areas than that in the central plain, showing significant latitudinal zonality. Furthermore, the value of K increased from 0.35 to 0.78 from northeast to the central plain, and decreased from 0.78 to 0.53 from the central plain to southern mountain areas. These indicated that climate resource in the central plain region was more abundant and potential, compared with other regions. GuanZhong region was classified into three larger agricultural zones and three small independent zones, according to agro-ecological assessment. Light, heat and water resources should be made use of in an efficient way in spatial allo- cation of agricultural production. For example, water facilities should also be im- proved in Weibei plateau region where highly-qualified fruit should be enhanced and fruit processing industrial chain should be shaped. Large-scale production area of wheat should be increased in central irrigation region and more vegetable bases should be developed around large and medium-scale cities. Thanks for outstanding water conservation function, the three-dimensional agriculture including medicine and other sideline production should be developed in Qinling Mountains and the special- ized commercial agriculture should be accelerated in independent small zones, ac- cording to local conditions. In the research, different crop varieties were developed in corresponding regions as per current eco-climatic conditions.
基金financially supported by the National Natural Science Foundation of China(No.41204055,41164003,and 41104074)Opening Project(No.SMIL-2014-06) of Hubei Subsurface Multi-scale Imaging Lab(SMIL),China University of Geosciences(Wuhan)
文摘The conventional finite-element（FE） method often uses a structured mesh, which is designed according to the user’s experience, and it is not sufficiently accurate and flexible to accommodate complex structures such as dipping interfaces and rough topography. We present an adaptive FE method for 2.5D forward modeling of induced polarization（IP）. In the presented method, an unstructured triangulation mesh that allows for local mesh refinement and flexible description of arbitrary model geometries is used. Furthermore, the mesh refinement process is guided by dual error estimate weighting to bias the refinement towards elements that affect the solution at the receiver locations. After the final mesh is generated, the Jacobian matrix is used to obtain the IP response on 2D structure models. We validate the adaptive FE algorithm using a vertical contact model. The validation shows that the elements near the receivers are highly refined and the average relative error of the potentials converges to 0.4 % and 1.2 % for the IP response. This suggests that the numerical solution of the adaptive FE algorithm converges to an accurate solution with the refined mesh. Finally, the accuracy and flexibility of the adaptive FE procedure are also validated using more complex models.
基金The National Natural Science Foundation of China (No.50708065)the National High Technology Research and Development Program of China (863 Program) (No. 2007AA11Z113)Specialized Research Fund for the Doctoral Program of Higher Education (No. 20070056125)
文摘A stochastic finite element computational methodology for probabilistic durability assessment of deteriorating reinforced concrete（RC） bridges by considering the time-and space-dependent variabilities is presented.First,finite element analysis with a smeared cracking approach is implemented.The time-dependent bond-slip relationship between steel and concrete,and the stress-strain relationship of corroded steel bars are considered.Secondly,a stochastic finite element-based computational framework for reliability assessment of deteriorating RC bridges is proposed.The spatial and temporal variability of several parameters affecting the reliability of RC bridges is considered.Based on the data reported by several researchers and from field investigations,the Monte Carlo simulation is used to account for the uncertainties in various parameters,including local and general corrosion in rebars,concrete cover depth,surface chloride concentration,chloride diffusion coefficient,and corrosion rate.Finally,the proposed probabilistic durability assessment approach and framework are applied to evaluate the time-dependent reliability of a girder of a RC bridge located on the Tianjin Binhai New Area in China.
文摘In this paper we propose an absolute error loss EB estimator for parameter of one-side truncation distribution families. Under some conditions we have proved that the convergence rates of its Bayes risk is o, where 0<λ,r≤1,Mn≤lnln n (for large n),Mn→∞ as n→∞.
文摘In this paper, extracting parallelizatio n from the sum of disjoint products approach is discussed. A general framework of parallelizing disjoint products approach is presented. And a parallel version of the newest disjoint products algorithm is implemented. The results of testing s how the effect is so good to get linear speedups.
基金Supported by A Grant of the Korea Healthcare technology R&D Project,Ministry for Health,Welfare & Family Affairs,Republic of Korea,A091047
文摘AIM:To evaluate the utility of assessing iodized oil uptake with cone-beam computed tomography(CT)in transarterial chemoembolization(TACE)for small he-patocellular carcinoma(HCC).METHODS:Cone-beam CT provided by a biplane flat-panel detector angiography suite was performed on eighteen patients(sixteen men and two women;41-76 years;mean age,58.9 years)directly after TACE for small HCC(26 nodules under 30 mm;mean diam-eter,11.9 mm;range,5-28 mm).The pre-procedural locations of the tumors were evaluated using tripha-sic multi-detector row helical computed tomography(MDCT).The tumor locations on MDCT and the iodized oil uptake by the tumors were analyzed on cone-beam CT and on spot image directly after the procedures.RESULTS:All lesions on preprocedural MDCT were de-tected using iodized oil uptake in the lesions on cone-beam CT(sensitivity 100%,26/26).Spot image depictediodized oil uptake in 22 of the lesions(sensitivity 85%).The degree of iodized oil uptake was overestimated(9%,2/22)or underestimated(14%,3/22)on spot image in f ive nodules compared with that of cone-beam CT.CONCLUSION:Cone-beam CT is a useful and conve-nient tool for assessing the iodized oil uptake of small hepatic tumors(< 3 cm)directly after TACE.
基金Under the auspices of Major State Basic Research Development Program of China (973 Program) (No. 2005CB724207)
文摘Urbanization strategic environmental assessment (SEA) is an effective instrument to enhance the harmo-nious development of urban complex system, integrating of environment and development in decision-making. Ur-banization strategic environmental assessment integration technology system (SEA-ITS) is composed of "3S" (RS, GIS and GPS), environmental expert system and environmental model system, coupling with appropriate SEA working process closely. In this paper, the structure and components of SEA-ITS are analyzed based on Chinese characteristics, meanwhile methods to fulfill the following system functions are discussed: urbanization SEA in-quiring, analysis, discrimination, assessment, prediction, decision-making and output. Moreover, methods and tech-nologies employed in different urbanization SEA hierarchies are summarized. As a case study, urbanization SEA-ITS is applied in Changchun City to solving complex real problems. Methods such as system dynamics and grey cluster are adopted to achieve the environmental impact assessment on the eco-industrial system planning. It is revealed that the system designed is capable of reflecting the dynamic behavior of eco-industrial system under different sce-narios, meanwhile accomplishing strategy optimization and supplying scientific reference. The 4th strategy, namely concerning on economy increase and its interaction with science, technology and environment progress, would have the best efficiency. Further, more attention should be paid to the secondary development of integration techniques and function modification system of urbanization SEA-ITS.
基金supported by Research Foundation for Science and Technology Innovation Talents of Harbin(2010RFQXS072)Scientific Research Foundation for the Returned Overseas Chinese Scholars of Heilongjiang Province of China(200923)
文摘To get the IR spectrums of Agrimonia Pilosa Ledeb （APL） from China and Japan areas, and to fend out the characters of IR spectrums through the content of different chemical constituents, to provide a fast and effective analysis method monitor the inherent qualities of traditional Chinese medicine-APL. Fourier Transform Infrared Spectroscopy （FT-IR） was applied to detect sample of APL from Ofina and Japan areas. This study showed that the IR spectra of APL from China and Japan areas have their unique IR fingerprint features. The contents of tannin and calcitum phosphate in APL from China is different APL from Japan. So FF-IR is a very quick, effective and well repetitive method for monitoring and distinguishing the traditional Chinese medicine.
基金The World Academy of Sciences(TWAS)(13-301 RG/MSN/AS_C) is acknowledged for financial support under COMSTECH-TWAS Grants Program
文摘Synthesis,characterization of Co_3O_4 and Ag-Co_3O_4 composites and evaluation of their photo-catalytic activities towards photo-degradation of aqueous solution of rhodamine B dye under irradiation of visible light have been described in this paper.Co_3O_4 was prepared by solid phase mechano chemical process using Co(NO_3)_2·6H_2O and NH_4 HCO_3 as precursor materials.Ag was deposited on Co_3O_4 from AgNO_3 using Calotropis gigantea extract as reducing agent.XRD,SEM and FTIR were used for characterization of prepared composites.Photo-catalytic efficiencies of as-prepared Co_3O_4 and Ag-Co_3O_4 were evaluated for aqueous phase photo-degradation of rhodamine B.It was found that deposition of Ag on Co_3O_4 highly enhanced the photo-catalytic activity of Co_3O_4.Photo-catalytic degradation followed the Eley–Rideal mechanism.About 100% and 91% photo-degradation of 40 ml dye solution achieved at 313 K in 90 and 120 min over 0.05 g of Ag-Co_3O_4 as photo-catalyst using 100 and 200 mg·L^(-1) as initial concentration of dye respectively.
基金Supported by the National Natural Science Foundation of China(No.30830015)the National Key Technology Research and Development Program of the 11th Five-Year Plan(No.2006BAD09A04)the National High Technology Research and Development Program of China(863Program,Nos.2006AA10A402,2007AA09Z406,2006AA05Z112,2006AA10A413)
文摘Gracilaria lemaneiformis Bory is an economically important alga that is primarily used for agar production.Although tetraspores are ideal seeds for the cultivation of G.lemaneiformis,the most popular culture method is currently based on vegetative fragments,which is labor-intensive and time-consuming.In this study,we optimized the conditions for tetraspore release and evaluated the photosynthetic activities of different colonies formed from the branches of G.lemaneiformis using a PAM(pulse-amplitude-modulated) measuring system.The results showed that variations in temperature and salinityhad significant effects on tetraspore yield.However,variations in the photon flux density(from 15 μmol m-2 s-1 to 480 μmol m-2 s-1) had no apparent effect on tetraspore yield.Moreover,the PAM-parameters Y(I),Y(Ⅱ),ETR(I),ETR(Ⅱ) and Fv/Fm of colonies formed from different branches showed the same trend:parameter values of first generation branches>second generation branches>third generation branches.These results suggest that the photosynthetic activities of different colonies of branches changed with the same trend.Furthermore,photosynthesis in G.lemaneiformis was found to be involved in vegetative reproduction and tetraspore formation.Finally,the first generation branches grew slowly,but accumulated organic compounds to form large numbers of tetraspores.Taken together,these results showed that the first generation branches are ideal materials for the release of tetraspores.
