A series of molybdenum carbide catalysts promoted by potassium and cobalt,supported on carbon nanotubes（CNTs） were prepared by carbothermal hydrogen reduction method using CNTs as a carbon precursor.Firstly,molybden...A series of molybdenum carbide catalysts promoted by potassium and cobalt,supported on carbon nanotubes（CNTs） were prepared by carbothermal hydrogen reduction method using CNTs as a carbon precursor.Firstly,molybdenum and cobalt were loaded by co-precipitation method,and then potassium and additional molybdenum were impregnated to previous resultant.Different Mo/Co and K/Co molar ratio were used in catalyst synthesis.All the catalysts were characterized by ICP,BET,TEM,TPR,XRD and XPS,and the catalysts performances for higher alcohols synthesis（HAS） were investigated in a fixed-bed micro-reactor.The maximum selectivity to higher alcohols（C2＋OH） was obtained at Mo/Co and K/Mo molar ratios of 1.66 and 0.6,respectively.XRD results confirmed the formation of K-Mo-C site and Co3Mo3 C phase that might play important role in producing C2＋OH.展开更多
Nickel and potassium co-modified β-Mo2C catalysts were prepared and used for CO hydrogenation reaction. The major products over β-Mo2C were C1-C4 hydrocarbons, only few alcohols were obtained. Addition of potassium ...Nickel and potassium co-modified β-Mo2C catalysts were prepared and used for CO hydrogenation reaction. The major products over β-Mo2C were C1-C4 hydrocarbons, only few alcohols were obtained. Addition of potassium resulted in remarkable selectivity shift from hydrocarbons to alcohols at the expense of CO conversion over β-Mo2C. Moreover, it was found that potassium enhanced the ability of chain propagation with a higher C2＋OH production. Modified by nickel,β-Mo2C showed a relatively high CO conversion, however, the products were similar to those of pure β-Mo2C. When co-modified by nickel and potassium,β-Mo2C exhibited high activity and selectivity towards mixed alcohols synthesis, and also the whole chain propagation to produce alcohols especially for the stage of C1 OH to C2OH was remarkably enhanced. It was concluded that the Ni and K had, to some extent, synergistic effect on CO conversion.展开更多
以三聚氰胺苯甲酸盐为碳源和氮源、以三聚氰胺磷钼酸盐为钼源、磷源和氮源,采用程序升温的方法制备了系列N,P掺杂型C@Mo_2C催化剂。采用XRD、SEM、TEM和XPS等对催化剂的结构、形貌和表面特性进行了表征,研究了三聚氰胺苯甲酸盐中n(三聚...以三聚氰胺苯甲酸盐为碳源和氮源、以三聚氰胺磷钼酸盐为钼源、磷源和氮源,采用程序升温的方法制备了系列N,P掺杂型C@Mo_2C催化剂。采用XRD、SEM、TEM和XPS等对催化剂的结构、形貌和表面特性进行了表征,研究了三聚氰胺苯甲酸盐中n(三聚氰胺)/n(苯甲酸)、前驱体中n(C)/n(Mo)等因素对所制备催化剂的结构及其在二氧化碳加氢反应中催化性能的影响。在反应温度为220℃、反应压力为3.0 MPa、空速为3 600 m L/(g·h)的条件下,在N,P掺杂型C@Mo_2C的催化作用下,CO_2转化率可以达到12.2%,此时产物中CH_3OH的选择性达到52.2%。展开更多
A series of molybdenum carbides were synthesized using the non-routine carbon source C_ 3 H_ 8 with oxide and nitride as precursors and characterized by XRD, SEM and elemental analysis. The catalytic activity measurem...A series of molybdenum carbides were synthesized using the non-routine carbon source C_ 3 H_ 8 with oxide and nitride as precursors and characterized by XRD, SEM and elemental analysis. The catalytic activity measurements of the as-prepared bulk and amorphous SiO_ 2 supported catalysts for thiophene HDS were carried out in a pulse microreactor-gas chromatography and their apparent activation energy was calculated. β-Mo_ 2 C was proved to be the most active phase, the Ea value of which was reduced by being supported on SiO_ 2 .展开更多
文摘A series of molybdenum carbide catalysts promoted by potassium and cobalt,supported on carbon nanotubes（CNTs） were prepared by carbothermal hydrogen reduction method using CNTs as a carbon precursor.Firstly,molybdenum and cobalt were loaded by co-precipitation method,and then potassium and additional molybdenum were impregnated to previous resultant.Different Mo/Co and K/Co molar ratio were used in catalyst synthesis.All the catalysts were characterized by ICP,BET,TEM,TPR,XRD and XPS,and the catalysts performances for higher alcohols synthesis（HAS） were investigated in a fixed-bed micro-reactor.The maximum selectivity to higher alcohols（C2＋OH） was obtained at Mo/Co and K/Mo molar ratios of 1.66 and 0.6,respectively.XRD results confirmed the formation of K-Mo-C site and Co3Mo3 C phase that might play important role in producing C2＋OH.
基金supported by the National Key Project for Basic Research of China (973 Project) (No. 2005CB221400)
文摘Nickel and potassium co-modified β-Mo2C catalysts were prepared and used for CO hydrogenation reaction. The major products over β-Mo2C were C1-C4 hydrocarbons, only few alcohols were obtained. Addition of potassium resulted in remarkable selectivity shift from hydrocarbons to alcohols at the expense of CO conversion over β-Mo2C. Moreover, it was found that potassium enhanced the ability of chain propagation with a higher C2＋OH production. Modified by nickel,β-Mo2C showed a relatively high CO conversion, however, the products were similar to those of pure β-Mo2C. When co-modified by nickel and potassium,β-Mo2C exhibited high activity and selectivity towards mixed alcohols synthesis, and also the whole chain propagation to produce alcohols especially for the stage of C1 OH to C2OH was remarkably enhanced. It was concluded that the Ni and K had, to some extent, synergistic effect on CO conversion.
文摘以三聚氰胺苯甲酸盐为碳源和氮源、以三聚氰胺磷钼酸盐为钼源、磷源和氮源,采用程序升温的方法制备了系列N,P掺杂型C@Mo_2C催化剂。采用XRD、SEM、TEM和XPS等对催化剂的结构、形貌和表面特性进行了表征,研究了三聚氰胺苯甲酸盐中n(三聚氰胺)/n(苯甲酸)、前驱体中n(C)/n(Mo)等因素对所制备催化剂的结构及其在二氧化碳加氢反应中催化性能的影响。在反应温度为220℃、反应压力为3.0 MPa、空速为3 600 m L/(g·h)的条件下,在N,P掺杂型C@Mo_2C的催化作用下,CO_2转化率可以达到12.2%,此时产物中CH_3OH的选择性达到52.2%。
文摘A series of molybdenum carbides were synthesized using the non-routine carbon source C_ 3 H_ 8 with oxide and nitride as precursors and characterized by XRD, SEM and elemental analysis. The catalytic activity measurements of the as-prepared bulk and amorphous SiO_ 2 supported catalysts for thiophene HDS were carried out in a pulse microreactor-gas chromatography and their apparent activation energy was calculated. β-Mo_ 2 C was proved to be the most active phase, the Ea value of which was reduced by being supported on SiO_ 2 .
