期刊文献+
共找到20,521篇文章
< 1 2 250 >
每页显示 20 50 100
γ-Bi2O3/TiO2复合纤维的制备及光催化性能 被引量:12
1
作者 李跃军 曹铁平 +1 位作者 邵长路 王长华 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2012年第7期687-692,共6页
采用静电纺丝技术与溶剂热法相结合制备了γ-Bi2O3/TiO2复合纤维光催化材料.利用X射线衍射(XRD)、扫描电镜(SEM)、电子能谱(EDS)、透射电镜(TEM)、高分辨透射电镜(HRTEM)和紫外–可见吸收光谱(UV-Vis)等分析测试手段对材料进行了表征,... 采用静电纺丝技术与溶剂热法相结合制备了γ-Bi2O3/TiO2复合纤维光催化材料.利用X射线衍射(XRD)、扫描电镜(SEM)、电子能谱(EDS)、透射电镜(TEM)、高分辨透射电镜(HRTEM)和紫外–可见吸收光谱(UV-Vis)等分析测试手段对材料进行了表征,并以罗丹明B(RB)的脱色降解为模式反应,考察了材料的可见光催化性能.结果表明:γ-Bi2O3纳米片均匀地生长在TiO2纤维上,形成了具有异质结构的γ-Bi2O3/TiO2复合纤维光催化材料,其光谱响应范围拓宽至可见光区,有利于TiO2光生电子和空穴的分离,增强了体系的量子效率.与纯TiO2纤维相比可见光催化活性明显提高,对RB的脱色率达87.8%. 展开更多
关键词 静电纺丝 溶剂热法 γ-bi2o3/tio2复合纤维 光催化
在线阅读 下载PDF
α-Bi_2O_3/TiO_2纳米粒子的制备及其光催化性能的研究 被引量:3
2
作者 黄正喜 刘献平 +1 位作者 吴腊梅 袁誉洪 《中南民族大学学报(自然科学版)》 CAS 北大核心 2016年第1期17-22,共6页
采用两步水热法合成了α-Bi2O3/TiO_2纳米粒子,利用透射电子显微镜(TEM)、X-射线光电子能谱仪(XPS)、X射线衍射仪(XRD)和紫外-可见固体漫反射光谱(DRS)对其进行了表征,以罗丹明B(Rh B)为模型污染物评价了其光催化活性,结果表明:在模拟... 采用两步水热法合成了α-Bi2O3/TiO_2纳米粒子,利用透射电子显微镜(TEM)、X-射线光电子能谱仪(XPS)、X射线衍射仪(XRD)和紫外-可见固体漫反射光谱(DRS)对其进行了表征,以罗丹明B(Rh B)为模型污染物评价了其光催化活性,结果表明:在模拟可见光源的照射下,α-Bi2O3/TiO_2比α-Bi2O3、TiO_2单体具有更好地光催化活性,当α-Bi_2O_3与TiO_2的摩尔比为1︰5时复合纳米粒子的光催化活性最佳,光照150 min降解率为98.5%.经过3次循环利用,α-Bi2O3/TiO_2纳米粒子具有较好的稳定性. 展开更多
关键词 α-bi2 o3/ tio2 纳米粒子 罗丹明B 光催化降解
在线阅读 下载PDF
BaO-PbO-Nd_2O_3-Bi_2O_3-TiO_2系物相组成与介电性能关系的研究 被引量:8
3
作者 袁廷志 吴霞宛 +1 位作者 李玲霞 王洪儒 《硅酸盐通报》 CAS CSCD 2002年第6期36-40,共5页
以五元系统BaO PbO Nd2 O3 Bi2 O3 TiO2 为研究对象探讨化合物相与介电性能的定量关系。系统的主次晶相分别为BaNd2 Ti5O14 和Bi4 Ti3O12 。对系统进行X射线分析 ,用X射线衍射峰强度计算出系统中各物相的体积分数 ,再运用李赫德涅凯对... 以五元系统BaO PbO Nd2 O3 Bi2 O3 TiO2 为研究对象探讨化合物相与介电性能的定量关系。系统的主次晶相分别为BaNd2 Ti5O14 和Bi4 Ti3O12 。对系统进行X射线分析 ,用X射线衍射峰强度计算出系统中各物相的体积分数 ,再运用李赫德涅凯对数混合定则进行定量计算 ,得出的系统的介电性能与用仪器实测的系统参数相符。在本研究系统中 ,X衍射射线分析可以测定和定量表征烧结介质瓷中化合物含量 ,经过对系统中各化合物成分的介电性能测定 ,可计算出所研究系统的介电性能 ,从而可以作为一种介质的设计方法。本系统主要是BaO PbO Nd2 O3 Bi2 O3 TiO2 系。Nd和Bi对Ba的取代是异价取代 ,故能准确定量测出和算出其化合物的含量。Pb和Ba是等价取代 ,其化合物的含量可用X射线衍射等方法测出 ,在本系统中因其加入量小 。 展开更多
关键词 X射线衍射峰强度 陶瓷系统 Bao-Pbo-Nd2o3-bi2o3-tio2 物相 组成 介电性能 研究
在线阅读 下载PDF
纳米TiO2-Bi2O3-La2O3复合材料的制备及光、电催化性能研究 被引量:4
4
作者 丁欣宇 景晓辉 +1 位作者 汤艳峰 蔡再生 《精细化工》 CAS CSCD 北大核心 2008年第6期532-535,共4页
以钛酸丁酯、硝酸铋、硝酸镧为主要原料,溶胶-凝胶法分别制备了TiO2、TiO2-Bi2O3、TiO2-La2O3和TiO2-Bi2O3-La2O3等催化剂。用XRD、TEM等方法对其进行了表征,晶型均为锐钛矿,粒径范围10~25 nm。以罗丹明B为目标降解物,分别考察了催化... 以钛酸丁酯、硝酸铋、硝酸镧为主要原料,溶胶-凝胶法分别制备了TiO2、TiO2-Bi2O3、TiO2-La2O3和TiO2-Bi2O3-La2O3等催化剂。用XRD、TEM等方法对其进行了表征,晶型均为锐钛矿,粒径范围10~25 nm。以罗丹明B为目标降解物,分别考察了催化剂的光、电催化活性。结果表明,在紫外光照下,TiO2-Bi2O3-La2O3的光催化活性最高,60 min时罗丹明B的降解率达98.7%,较纯TiO2光催化活性提高了162%;以负载TiO2-Bi2O3-La2O3的多孔材料为粒子电极,采用三维电极法降解罗丹明B,20 min时的降解率达98.6%,较使用负载纯TiO2粒子电极提高了9%。 展开更多
关键词 tio2 BI2o3 LA2o3 复合材料 光催化 电催化 罗丹明B
在线阅读 下载PDF
Preparation of α-Bi_2O_3 from bismuth powders through low-temperature oxidation 被引量:4
5
作者 夏纪勇 唐谟堂 +2 位作者 陈萃 金胜明 陈永明 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第9期2289-2294,共6页
α-Bi2O3 powders were prepared from nanometer Bi powders through low-temperature oxidation at less than 873.15 K. XRD, SEM, TEM and HRTEM were used to characterize the structure and morphology of Bi powders and Bi2O3 ... α-Bi2O3 powders were prepared from nanometer Bi powders through low-temperature oxidation at less than 873.15 K. XRD, SEM, TEM and HRTEM were used to characterize the structure and morphology of Bi powders and Bi2O3 particles. Kinetic studies on the bismuth oxidation at low-temperatures were carried out by TGA method. The results show that bismuth beads should be reunited and oxidized to become irregular Bi2O3 powders. The bismuth oxidation follows shrinking core model, and its controlling mechanism varies at different reaction time. Within 0-10 min, the kinetics is controlled by chemical reaction, after that it is controlled by O2 diffusion in the solid α-Bi2O3 layer. The apparent activation energy is determined as 55.19 kJ/mol in liquid-phase oxidation. 展开更多
关键词 bismuth powder low-temperature oxidation α-bi2o3 oxidation kinetics
在线阅读 下载PDF
Al_(2)O_(3)/TiO_(2)/Na_(2)O对石灰在炼钢渣中溶解的影响
6
作者 皮溅清 王明理 +3 位作者 张延玲 赵宏博 余阚 李更 《有色金属科学与工程》 北大核心 2025年第1期1-7,共7页
含有Al_(2)O_(3)、TiO_(2)、Na_(2)O组元的赤泥基熔剂对传统的炼钢渣系具有显著的助熔作用,研究炼钢炉渣中石灰的溶解机理及影响其溶解速率的因素,对促进炼钢中无氟熔剂的发展有很大意义。本实验采用圆柱旋转法测定了石灰在含Al_(2)O_(3... 含有Al_(2)O_(3)、TiO_(2)、Na_(2)O组元的赤泥基熔剂对传统的炼钢渣系具有显著的助熔作用,研究炼钢炉渣中石灰的溶解机理及影响其溶解速率的因素,对促进炼钢中无氟熔剂的发展有很大意义。本实验采用圆柱旋转法测定了石灰在含Al_(2)O_(3)、TiO_(2)、Na_(2)O的炼钢渣系中的溶解速率,对其熔化过程矿相变化进行分析论证。结果表明,在1400℃时,石灰溶解的促进系数按Na_(2)O>TiO_(2)>Al_(2)O_(3)的顺序下降,添加10%的Na_(2)O能使石灰溶解的促进系数提高7倍。此外文章探究了Al_(2)O_(3)、TiO_(2)、Na_(2)O对CaO在熔渣中的扩散以及边界层上石灰分解反应的影响,阐明了该条件下石灰的溶解机理。发现同时包含Al_(2)O_(3)/TiO_(2)/Na_(2)O的赤泥基熔剂可以作为合适的炼钢熔剂。 展开更多
关键词 石灰溶解 Al_(2)o_(3)/tio_(2)/Na_(2)o 炼钢渣
在线阅读 下载PDF
Ba-Bi复合掺杂对Y_2O_3·2TiO_2微波介质陶瓷性能的影响 被引量:1
7
作者 陶婷婷 丁佳钰 张其土 《电子元件与材料》 CAS CSCD 北大核心 2009年第9期38-41,共4页
采用Ba-Bi复合掺杂对Y2O3·2TiO2微波介质陶瓷进行改性,以降低其烧结温度并改善其介电性能。在固定Bi2Ti2O7掺杂量为质量分数8%的基础上,研究了BaCO3掺杂量对陶瓷微结构、烧结性能和介电性能的影响。结果表明:当w(BaCO3)为1%时,在... 采用Ba-Bi复合掺杂对Y2O3·2TiO2微波介质陶瓷进行改性,以降低其烧结温度并改善其介电性能。在固定Bi2Ti2O7掺杂量为质量分数8%的基础上,研究了BaCO3掺杂量对陶瓷微结构、烧结性能和介电性能的影响。结果表明:当w(BaCO3)为1%时,在较低的烧结温度(约1280℃)下保温2h制备了一种新型中介电常数Y2O3·2TiO2微波介质陶瓷。该陶瓷具有较好的介电性能:在1MHz下,εr≈72.5,tanδ≈2.5×10-3;在微波频率(5.03GHz)下,εr=72.1,Q·f值为2241.0GHz。 展开更多
关键词 无机非金属材料 微波介质陶瓷 Y2o2tio2 中介电常数 复合掺杂
在线阅读 下载PDF
Zn-Bi共掺杂Ba_(0.2)Sr_(0.8)TiO_3陶瓷结构及介电性能的研究 被引量:4
8
作者 邓春阳 周恒为 +4 位作者 刘德成 马晓娇 徐凡华 衡晓 尹红梅 《伊犁师范学院学报(自然科学版)》 2013年第2期43-47,共5页
采用传统固相反应法制备了ZnO的摩尔数为O.04,系列Zn-Bi共掺杂Ba0.2Sr0.8TiO3(BST)的陶瓷材料,包括BST+0.04ZnO+xBizO,(X=0.02,0.025,0.03).用X射线衍射、扫描电子显微镜和变温介电谱方法,对它们的晶格结构、微观形... 采用传统固相反应法制备了ZnO的摩尔数为O.04,系列Zn-Bi共掺杂Ba0.2Sr0.8TiO3(BST)的陶瓷材料,包括BST+0.04ZnO+xBizO,(X=0.02,0.025,0.03).用X射线衍射、扫描电子显微镜和变温介电谱方法,对它们的晶格结构、微观形貌和复介电常数进行了测量和分析.结果表明:(1)Zn2+和Bi3+进入到BST晶格中并与之形成ABO3钙钛矿型固溶体;(2)随Bi2O3的掺入,陶瓷的室温晶系结构由立方相转变为四方相,同时出现在--120K的弥散相变转化为弛豫相变;(3)Bi2O3掺杂对晶粒生长有明显的抑制作用,但晶粒之间的连接性增强,陶瓷的致密度增加;(4)当T=300K,f=1Hz,Bi2O3掺杂量为0.025mol时,陶瓷试样介电常数最大(857),介电损耗最小(8X10。).上述结果对该类陶瓷掺杂改性研究以及弛豫相变机制探索无疑有一定的参考价值. 展开更多
关键词 铁电陶瓷 Zno和Bi2o3 共掺杂 固相反应 复介电常数
在线阅读 下载PDF
Colorless/Black Switching Electrochromic Device Based on WO_(3)·xH_(2)O and Reversible Metal Electrodeposition
9
作者 WAN Xinyi WANG Wenqi +3 位作者 LI Jiacheng ZHAO Junliang MA Dongyun WANG Jinmin 《无机材料学报》 北大核心 2025年第10期1163-1172,I0001,I0002,共12页
Electrochromic(EC)smart windows utilizing a reversible metal electrodeposition device(RMED)offer a compelling alternative for dynamically regulating transmissions of optical and thermal energy.An EC device(ECD)is cons... Electrochromic(EC)smart windows utilizing a reversible metal electrodeposition device(RMED)offer a compelling alternative for dynamically regulating transmissions of optical and thermal energy.An EC device(ECD)is constructed by reversible metal electrodeposition(RME)of Bi/Cu on WO_(3)·xH_(2)O film electrodeposited onto fluorine-doped tin oxide(FTO)transparent conductive glass.The electrolyte consists of CuCl_(2),BiCl_(3),KCl and HCl aqueous solution,supplying necessary components for both electrochemical and electrodeposition processes.The ECD shows ability to rapidly transition between colorless and black states,which achieves a large optical modulation of 77.0%at 570 nm.In the black state,the ECD exhibits a near-zero transmittance in the wavelength range of 400-1100 nm while maintaining 96.6%of its initial optical modulation after coloration/bleaching cycling of 60000 s,exhibiting good cyclic stability.This RMED has relatively high stability under open-circuit voltage and also possesses excellent heat insulation performance.The results offer a solution to overcome the poor cyclic stability of RMEDs and improve the optical modulation of ECDs. 展开更多
关键词 reversible metal electrodeposition electrochromic Wo_(3)·xH_(2)o
在线阅读 下载PDF
复合材料TiO_2-Bi_2O_3的制备及光催化性能
10
作者 史清华 赵婷婷 +1 位作者 芦宝平 董金龙 《山东化工》 CAS 2016年第14期1-2,共2页
采用均匀沉淀法,以硫酸钛为前躯体,制备TiO_2-Bi_2O_3复合粉体材料。以罗丹明B为目标降解物,研究了热处理温度、催化剂用量对该复合材料光催化性能的影响。光催化活性随焙烧温度升高而增大,550℃焙烧的样品光催化活性高。当催化剂用量为... 采用均匀沉淀法,以硫酸钛为前躯体,制备TiO_2-Bi_2O_3复合粉体材料。以罗丹明B为目标降解物,研究了热处理温度、催化剂用量对该复合材料光催化性能的影响。光催化活性随焙烧温度升高而增大,550℃焙烧的样品光催化活性高。当催化剂用量为0.026g/10 m L时,20 mg/L的罗丹明B溶液在紫外光照射100 min后,降解率可达到90%。该复合物对罗丹明B溶液的光催化降解符合一级动力学方程。 展开更多
关键词 tio2-bi2o3 复合材料 光催化 罗丹明B
在线阅读 下载PDF
Interface-engineered S-scheme 2D/1D heterojunction of Cs_(0.32)WO_(3)/WO_(3)·2H_(2)O for boosted CO_(2)photoreduction:Synergistic charge separation and activation
11
作者 Guangmei Gan Lin Yin +3 位作者 Xiaotian Wang Juyuan Xing Yuan Li Gaoke Zhang 《Chinese Journal of Catalysis》 2025年第12期219-230,共12页
Developing efficient photocatalysts for CO_(2)conversion under full-spectrum irradiation remains a key challenge for solar-to-chemical energy conversion.In this study,a novel S-scheme heterojunction composed of reduct... Developing efficient photocatalysts for CO_(2)conversion under full-spectrum irradiation remains a key challenge for solar-to-chemical energy conversion.In this study,a novel S-scheme heterojunction composed of reduction Cs_(0.32)WO_(3)(CWO)nanosheets with hexagonal structure and oxidation WO_(3)·2H_(2)O(WO)nanorods with monoclinic structure photocatalyst was successfully constructed via an ultrasound strategy.Under full-spectrum irradiation for 4 h,the optimized 2D/1D of heterostructure CWO/WO-0.8 exhibited superior photocatalytic performance,achieving CO and CH_(3)OH yields of 29.74 and 63.71μmol·g^(-1),respectively.The enhanced activity is primarily ascribed to the formation of an S-scheme charge transfer pathway,which facilitates efficient separation and directional migration of photogenerated charge carriers through the internal electric field at the CWO/WO interface.This process facilitates the electron enrichment on the CWO surface and significantly enhances its CO_(2)reduction ability.Besides,the results of various characterizations show that CWO/WO-0.8 possesses enhanced optical response capability.The results of density functional theory calculations and CO_(2)-temperature programmed desorption analysis confirmed that the CWO/WO heterojunction exhibits stronger CO_(2)adsorption and activation abilities compared to the pristine CWO and WO.The reaction pathway for CH_(3)OH production was elucidated by in-situ diffused reflectance Fourier transformed infrared tests.This work provides new insights into the rational design of S-scheme photocatalysts for efficient and selective CO_(2)conversion. 展开更多
关键词 S-scheme heterojunction Photocatalysts Co_(2)reduction Cs_(0.32)Wo_(3) Wo_(32H_(2)o CH_(3)oH
在线阅读 下载PDF
Z-scheme heterojunction Zn_(3)(OH)_(2)(V_(2)O_(7))(H_(2)O)_(2)/V-Zn(O,S)for enhanced visible-light photocatalytic N2 fixation via synergistic heterovalent vanadium states and oxygen vacancy defects
12
作者 Pengkun Zhang Qinhan Wu +7 位作者 Haoyu Wang Dong-Hau Kuo Yujie Lai Dongfang Lu Jiqing Li Jinguo Lin Zhanhui Yuan Xiaoyun Chen 《Chinese Journal of Catalysis》 2025年第7期279-293,共15页
Herein,we established a Zn_(3)(OH)_(2)(V_(2)O_(7))(H_(2)O)_(2)/V-Zn(O,S)Z-scheme heterojunction labeled ZnVO/V-Zn(O,S)with a heterovalent V^(4+)/V^(5+)states and oxygen vacancies in both phases via a one-step in-situ ... Herein,we established a Zn_(3)(OH)_(2)(V_(2)O_(7))(H_(2)O)_(2)/V-Zn(O,S)Z-scheme heterojunction labeled ZnVO/V-Zn(O,S)with a heterovalent V^(4+)/V^(5+)states and oxygen vacancies in both phases via a one-step in-situ hydrolysis method.The NaBH_(4) regulated the ZnVO/V-Zn(O,S)-3 with rich Vo and suitable n(V^(4+))/n(V^(5+))ratio achieved an excellent photocatalytic nitrogen fixation activity of 301.7μmol/(g×h)and apparent quantum efficiency of 1.148%at 420 nm without any sacrificial agent,which is 11 times than that of V-Zn(O,S).The Vo acts as the active site to trap and activate N_(2) molecules and to trap and activate H_(2)O to produce the H for N_(2) molecules photocatalytic reduction.The rich Vo defects can also reduce the competitive adsorption of H_(2)O and N_(2) molecules on the surface active site of the catalyst.The heterovalent vanadium states act as the photogenerated electrons,quickly hopping between V^(4+)and V^(5+)to transfer for the photocatalytic N_(2) reduction reaction.Additionally,the Z-scheme heterojunction effectively minimizes photogenerated carrier recombination.These synergistic effects collectively boost the photocatalytic nitrogen fixation activity.This study provides a practical method for designing Z-scheme heterojunctions for efficient photocatalytic N_(2) fixation under mild conditions. 展开更多
关键词 Zn_(3)(oH)_(2)(V_(2)o_(7))(H_(2)o)_(2) Z-scheme heterojunction Heterovalent valence states oxygen vacancy Photocatalytic N_(2)fixation
在线阅读 下载PDF
Rational construction of S-scheme CdS quantum dots/In_(2)O_(3) hollow nanotubes heterojunction for enhanced photocatalytic H_(2)evolution
13
作者 Yong-Hui Wu Yu-Qing Yan +3 位作者 Yi-Xiang Deng Wei-Ya Huang Kai Yang Kang-Qiang Lu 《Chinese Journal of Catalysis》 2025年第3期333-340,共8页
The rapid recombination of photogenerated carriers poses a significant limitation on the use of CdS quantum dots(QDs)in photocatalysis.Herein,the construction of a novel S-scheme heterojunction between cubic-phase CdS... The rapid recombination of photogenerated carriers poses a significant limitation on the use of CdS quantum dots(QDs)in photocatalysis.Herein,the construction of a novel S-scheme heterojunction between cubic-phase CdS QDs and hollow nanotube In_(2)O_(3)is successfully achieved using an electrostatic self-assembly method.Under visible light irradiation,all CdS-In_(2)O_(3)composites exhibit higher hydrogen evolution efficiency compared to pure CdS QDs.Notably,the photocatalytic H_(2)evolution rate of the optimal CdS-7%In_(2)O_(3)composite is determined to be 2258.59μmol g^(−1)h^(−1),approximately 12.3 times higher than that of pure CdS.The cyclic test indicates that the CdS-In_(2)O_(3)composite maintains considerable activity even after 5 cycles,indicating its excellent stability.In situ X-ray photoelectron spectroscopy and density functional theory calculations confirm that carrier migration in CdS-In_(2)O_(3)composites adheres to a typical S-scheme heterojunction mechanism.Additionally,a series of characterizations demonstrate that the formation of S-scheme heterojunctions between In_(2)O_(3)and CdS inhibits charge recombination and accelerates the separation and migration of photogenerated carriers in the CdS QDs,thus achieving enhanced photocatalytic performance.This work elucidates the pivotal role of S-scheme heterojunctions in photocatalytic H_(2)production and offers novel insights into the construction of effective composite photocatalysts. 展开更多
关键词 CdS In2o3 Quantum dot Photocatalytic H_(2)evolution S-scheme heterojunction
在线阅读 下载PDF
不同分子量P3HT/TiO_(2)复合材料可见光催化性能研究
14
作者 张见玲 《广州化工》 2025年第10期111-114,共4页
为进一步优化共轭聚合物/二氧化钛(TiO_(2))复合光催化材料的结构,提升其可见光催化降解性能,本研究制备了不同分子量P3HT/TiO_(2)复合光催化材料,并研究了其可见光催化降解甲基橙的性能。结果表明:低分子量P3HT/TiO_(2)复合光催化材料... 为进一步优化共轭聚合物/二氧化钛(TiO_(2))复合光催化材料的结构,提升其可见光催化降解性能,本研究制备了不同分子量P3HT/TiO_(2)复合光催化材料,并研究了其可见光催化降解甲基橙的性能。结果表明:低分子量P3HT/TiO_(2)复合光催化材料表现出更显著的可见光催化降解性能提升,综合分析复合材料的可见光吸收能力、光电流和对甲基橙的吸附性能,这是由于低分子量P3HT对MO较高的吸附性能促进了光催化降解过程中的界面反应。 展开更多
关键词 复合光催化材料 分子量 P3HT tio2
在线阅读 下载PDF
Constructing surface oxygen vacancy-rich ln_(2)O_(3-x)/tubular carbon nitride S-scheme heterojunction for selective biomass-derivative oxidation coupled with H_(2)production
15
作者 Xukai Xia Yanyan Jia +3 位作者 Weikang Wang Jifang Zhang Lele Wang Qinqin Liu 《Journal of Materials Science & Technology》 2025年第33期301-309,共9页
The integration of selective oxidation of renewable biomass and its derivatives with hydrogen(H_(2))pro-duction holds significant potential for simultaneously yielding value-added chemicals and“green H_(2)”,contribu... The integration of selective oxidation of renewable biomass and its derivatives with hydrogen(H_(2))pro-duction holds significant potential for simultaneously yielding value-added chemicals and“green H_(2)”,contributing to addressing sustainability challenges.The S-scheme charge transfer mechanism enhances charge separation by maintaining strong redox potentials at both ends,facilitating both oxidation and reduction reactions.Herein,we synthesize a visible-light-responsive oxygen vacancy-rich In_(2)O_(3-x)/tubular carbon nitride(IO_(OV)/TCN)S-scheme heterojunction photocatalyst via electrostatic adherence for selec-tive 5-hydroxymethylfurfural(HMF)oxidation to 2,5-diformylfuran(DFF)and 2,5-furandicarboxylic acid(FDCA),alongside H_(2)production.Under anaerobic conditions and visible-light irradiation,the optimal IOOV/TCN-10 catalyst achieves an HMF conversion of 94.8%with a selectivity of 53.6%for DFF and FDCA,and a H_(2)yield of 754.05μmol g^(−1)in 3 h.The significantly improved photocatalytic activity results from enhanced visible-light absorption,reduced carrier recombination,and abundant catalytic active sites due to the synergistic effect of surface oxygen vacancies,the hollow nanotube-based architecture,and the S-scheme charge transfer mechanism.This work highlights the great potentials of S-scheme heterojunctions in biomass conversion for sustainable energy use and chemical production. 展开更多
关键词 oxygen vacancy S-scheme heterojunction In2 o3-x/tubular carbon nitride HMF conversion H2 production
原文传递
Enhanced photoelectrochemical performance of TiO_(2)/Sb_(2)S_(3) nanorod arrays by annealing in Ar ambience
16
作者 SUI Meirong GU Xiuquan 《Optoelectronics Letters》 2025年第7期385-390,共6页
In this work,the TiO_(2)/Sb_(2)S_(3) nanorod arrays(NRAs)were synthesized through a two-stage hydrothermal route for photoelectrochemical(PEC)water splitting.The effect of annealing treatment in Ar ambience on the PEC... In this work,the TiO_(2)/Sb_(2)S_(3) nanorod arrays(NRAs)were synthesized through a two-stage hydrothermal route for photoelectrochemical(PEC)water splitting.The effect of annealing treatment in Ar ambience on the PEC activity of TiO_(2)/Sb_(2)S_(3) composite sample was investigated by electrochemical impedance analysis,including Nyquist and Mott-Schottky(M-S)plots.It was demonstrated that vacuum annealing could crystallize Sb_(2)S_(3) component and change its color from red to black,leading to an increment of photocurrent density from 1.9 A/m^(2) to 4.25 A/m^(2) at 0 V versus saturated calomel electrode(VSCE).The enhanced PEC performance was mainly attributed to the improved visible light absorption.Moreover,annealing treatment facilitated retarding the electron-hole recombination occurred at the solid/liquid interfaces.Our work might provide a novel strategy for enhancing the PEC performance of a semiconductor electrode. 展开更多
关键词 electrochemical impedance analysisincluding visible light absorption tio_(2)/Sb_(2)S_(3)nanorod arrays nanorod arrays nras vacuum annealing annealing treatment increment o photoelectrochemical performance
原文传递
Utilization of steelwork off-gases through methanol synthesis:Sulfur-induced dynamic migration of ZnO_(x) over industrial Cu/ZnO/Al_(2)O_(3) catalyst and the poisoning mechanism
17
作者 Yukun Tian Yu Zeng +5 位作者 Ziyang Chen Hua Tong Ming Chen Zhiyong Zhong Daiqi Ye Limin Chen 《Journal of Environmental Sciences》 2025年第12期659-673,共15页
The reduction of carbon emissions in the steel industry is a significant challenge,and utilizing CO_(2) from carbon intensive steel industry off-gases for methanol production is a promising strategy for decarbonizatio... The reduction of carbon emissions in the steel industry is a significant challenge,and utilizing CO_(2) from carbon intensive steel industry off-gases for methanol production is a promising strategy for decarbonization.However,steelwork off-gases typically contain various impurities,including H_(2)S,which can deactivate commercial methanol synthesis catalysts,Cu/ZnO/Al_(2)O_(3)(CZA).Reverse water-gas shift(RWGS)reaction is the predominant side reaction in CO_(2) hydrogenation to methanol which can occur at ambient pressure,enabling the decouple of RWGS from methanol production at high pressure.Then,a series of activated CZA catalysts has been in-situ pretreated in 400 ppm H_(2)S/Ar at 250℃and tested for both RWGS reaction at ambient pressure and CO_(2) hydrogenation to methanol at high pressure.An innovative decoupling strategy was employed to isolate the RWGS reaction from the methanol synthesis process,enabling the investigation of the evolution of active site structures and the poisoning mechanism through elemental analysis,X-ray Diffraction,X-ray Photoelectron Spectroscopy,Fourier Transform Infrared Spectroscopy,Temperature Programmed Reduction and CO_(2) Temperature Programmed Desorption.The results indicate that there are different dynamic migration behaviors of ZnO_(x) in the two reaction systems,leading to different poisoning mechanisms.These interesting findings are beneficial to develop sulfur resistant and durable highly efficient catalysts for CO_(2) hydrogenation to methanol,promoting the carbon emission reduction in steel industry. 展开更多
关键词 Steelwork off-gases Co_(2)hydrogenation to methanol H_(2)S Cu/Zn o/Al_(2)o_(3)catalysts Zno_(x)migration Deactivation and promotion mechanisms
原文传递
Towards rational design of Cu-SSZ-13 catalysts with less N_(2)O formation in NH_(3)-SCR reaction:The effect of BrФsted acid sites
18
作者 Jianqi Liu Jinpeng Du +9 位作者 Jingyi Wang Shichao Han Yulong Shan Yan Zhang Xuanhao Wu Shan Gao Yunbo Yu Zhongbiao Wu Wenpo Shan Hong He 《Journal of Environmental Sciences》 2025年第11期546-557,共12页
Ammonia Selective Catalytic Reduction(NHs-SCR)technology has been employed to eliminate NO_(x) from diesel engine exhaust,with Cu-SSZ-13 serving as the commercial catalyst.The greenhouse gas N_(2)O is produced as a by... Ammonia Selective Catalytic Reduction(NHs-SCR)technology has been employed to eliminate NO_(x) from diesel engine exhaust,with Cu-SSZ-13 serving as the commercial catalyst.The greenhouse gas N_(2)O is produced as a byproduct when using Cu-SSZ-13 as the NH_(3)-SCR catalyst.To achieve synergistic control of pollutants and greenhouse gases in diesel engine exhaust,rational design of Cu-SSZ-13 catalysts is required.In this study,the effect of Brønsted acid sites in Cu-SSZ-13 catalysts on the formation of N_(2)O was investigated.Mild thermal treatmentwas innovatively employed to prepare Cu-SSZ-13 catalysts with different amounts of Brønsted acid sites.EPR,H_(2)-TPR,NH_(3)-TPD,NMR were utilized to determine that the Brønsted acid sites were modified while the Cu species remained unchanged.Thereby an accurate assessment of the influence of Brønsted acid sites on N_(2)O formation could be achieved.Our results showed that Cu-SSZ-13 with more Brønsted acid sites produced less N_(2)O during the NH_(3)-SCR reaction.In the low-temperature region,the presence of framework acid sites facilitates the decomposition of the NH_(4)NO_(3)assisted by NO to form N_(2)and H_(2)O,reducing the formation of N_(2)O.In the high-temperature region,the Brønsted acid sites promote the decomposition of NH_(2)NO into N_(2)and H_(2)O.Meanwhile,the N_(2)O-SCR reaction can also be promoted by Brønsted acid sites,thereby decreasing N_(2)O emissions.This study suggests that in the future design and synthesis of Cu-SSZ-13 zeolites,attention should be paid to creating more Brønsted acid sites in Cu-SSZ-13 to reduce N_(2)O emissions. 展开更多
关键词 NH_(3)-SCR No_(x)abatement N_(2)o emission control Cu-SSZ-13 zeolite Brønsted acid sites
原文传递
TiO_2掺杂ZnO-Bi_2O_3-Co_2O_3-MnCO_3系低压压敏陶瓷的微结构和电性能研究 被引量:4
19
作者 巨锦华 王华 +3 位作者 许积文 任明放 杨玲 袁昌来 《人工晶体学报》 EI CAS CSCD 北大核心 2011年第2期505-509,共5页
采用固相反应法制备了TiO2掺杂的ZnO-Bi2O3-Co2O3-MnCO3系低压压敏陶瓷。采用X射线衍射、扫描电镜、压敏电阻直流参数仪、阻抗分析仪等研究了掺杂量对陶瓷的微结构、压敏性能和阻抗等影响。结果表明:掺杂1.0mol%TiO2时综合电性能最好,... 采用固相反应法制备了TiO2掺杂的ZnO-Bi2O3-Co2O3-MnCO3系低压压敏陶瓷。采用X射线衍射、扫描电镜、压敏电阻直流参数仪、阻抗分析仪等研究了掺杂量对陶瓷的微结构、压敏性能和阻抗等影响。结果表明:掺杂1.0mol%TiO2时综合电性能最好,压敏电压梯度为21.6 V/mm,漏电流密度为0.02μA/mm2,非线性系数为33;掺杂量大于1.0 mol%时,压敏电压梯度降低的同时也使非线性系数降低,漏电流密度增大;Cole-Cole形式的复阻抗谱图表明掺杂1.0 mol%TiO2的晶界电阻最大,晶界电阻对ZnO-Bi2O3-Co2O3-MnCO3-TiO2系低压压敏陶瓷电阻的贡献最为明显。 展开更多
关键词 Zno-bi2o3-Co2o3-MnCo3压敏陶瓷 微结构 电性能
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部