Recent years, it has attracted more attentions to increase the porosity and pore size of nanofibrous scaffolds to provide the for the cells to grow into the small-diameter vascular grafts. In this study, a novel bi-la...Recent years, it has attracted more attentions to increase the porosity and pore size of nanofibrous scaffolds to provide the for the cells to grow into the small-diameter vascular grafts. In this study, a novel bi-layer tubular scaffold with an inner layer and an outer layer was fabricated. The inner layer was random collagen/poly （ L-lactide-co-caprolactone ） I P （ LLA- CL） ] nanofibrous mat fabricated by conventional electrospinning and the outer layer was aligned collagen/P （LLA-CL） nanoyarns prepared by a dynamic liquid dectrospinning method. Fourier transform infrared spectroscopy （FTIR） was used to characterize the chemical structure. Scanning electron microscopy （ SEM ） was employed to observe the morphology of the layers and the cross- sectioned bi-layer tubular scaffold. A liquid displacement method was employed to measure the porosities of the inner and outer layers. Stress-strain curves were obtained to evaluate the mechanical properties of the two different layers and the bi-layer membrane. The diameters of the nanofibers and the nanoyarns were （480 ± 197 ） nm and （ 19.66 ± 4.05 ） μm, respectively. The outer layer had a significantly higher porosity and a larger pore size than those of the inner layer. Furthermore, the bi-layer membrane showed a good mechanical property which was suitable as small-diameter vascular graft. The results indicated that the bi-layer tubular scaffold had a great potential application in small vascular tissue engineering.展开更多
The reconstitution of a fully organized and functional hair follicle from dissociated cells propagated under defined tissue culture conditions is a challenge stillpending in tissue engineering. The loss of hair follic...The reconstitution of a fully organized and functional hair follicle from dissociated cells propagated under defined tissue culture conditions is a challenge stillpending in tissue engineering. The loss of hair follicles caused by injuries or pathologies such as alopecia not only affects the patients' psychological well-being, but also endangers certain inherent functions of the skin. It is then of great interest to find different strategies aiming to regenerate or neogenerate the hair follicle under conditions proper of an adult individual. Based upon current knowledge on the epithelial and dermal cells and their interactions during the embryonic hair generation and adult hair cycling, many researchers have tried to obtain mature hair follicles using different strategies and approaches depending on the causes of hair loss. This review summarizes current advances in the different experimental strategies to regenerate or neogenerate hair follicles, with emphasis on those involving neogenesis of hair follicles in adult individuals using isolated cells and tissue engineering. Most of these experiments were performed using rodent cells, particularly from embryonic or newborn origin. However, no successful strategy to generate human hair follicles from adult cells has yet been reported. This review identifies several issues that should be considered to achieve this objective. Perhaps the most important challenge is to provide threedimensional culture conditions mimicking the structure of living tissue. Improving culture conditions that allow the expansion of specific cells while protecting their inductive properties, as well as methods for selecting populations of epithelial stem cells, should give us the necessary tools to overcome the difficulties that constrain human hair follicle neogenesis. An analysis of patent trends shows that the number of patent applications aimed at hair follicle regeneration and neogenesis has been increasing during the last decade. This field is attractive not only to academic researchers but also to the companies that own almost half of the patents in this field.展开更多
Derma is progenitor cells sours, that are able to differentiate further in several mesodermal lineage and neural and endodermal lineage. Culture conditions, skin taking site and culture medium composition considerably...Derma is progenitor cells sours, that are able to differentiate further in several mesodermal lineage and neural and endodermal lineage. Culture conditions, skin taking site and culture medium composition considerably contribute to it. Spheroid cultured mesenchymal dermal cells contribution to skin regeneration in granulating wound in rat model was estimated.展开更多
The knee is a multi-component organ system comprised of several tissues which function coordinately to provide mobility. Injury to any one component compromises the integrity of the system and leads to adaptation of t...The knee is a multi-component organ system comprised of several tissues which function coordinately to provide mobility. Injury to any one component compromises the integrity of the system and leads to adaptation of the other components. Over time, such events often lead to dysfunction and degeneration of the knee. Therefore, there has been considerable research emphasis to repair injured components in the knee including cartilage, menisci, and ligaments. Approaches to improving healing and repair/regeneration of knee tissues have included surgery, anti-sense gene therapy, injection of growth factors and inflammatory cytokine antagonists, transplantation of in vitro expanded chondrocytes, enhancement of endogenous cells via microfracture, injection of mesenchymal stem cells, and implantation of in vitro tissue engineered constructs. Some of these approaches have lead to temporary improvement in knee functioning, while others offer the potential to restore function and tissue integrity for longer periods of time. This article will review the status of many of these approaches, and provide a perspective on their limitations and potential to contribute to restoration of knee function across the lifespan.展开更多
Tissue engineering and regenera-tive medicine have shown signifi-cant potential for repairing and regenerating damaged tissues and can be used to provide personalized treatment plans,with broad applica-tion prospects....Tissue engineering and regenera-tive medicine have shown signifi-cant potential for repairing and regenerating damaged tissues and can be used to provide personalized treatment plans,with broad applica-tion prospects.In this special issue,Bin Li’s team outlines the latest advances in minimally invasive implantable biomaterials for bone regeneration and different methods of achieving osteogenesis,with a focus on bioceramics and polymer materials and their applications in bone healing,vertebral augmenta-tion,implant fixation,tumor treatment of bone,and treatment of infections related to bone defects.Xinquan Jiang’s team constructs a novel photo-responsive multifunctional polyetheretherketone(PEEK)-based implant material(sPEEK/BP/E7)through the self-assembly of black phosphorus(BP)nanoplatelets,bioinspired poly-dopamine(PDA),and the biologically active short peptide E7 on sPEEK.The material exhibits effective osteogenic effects and good sterilization performance,providing a new idea for clinical application.展开更多
Cardiac tissue engineering aims to efficiently replace or repair injured heart tissue using scaffolds,relevant cells,or their combination.While the combination of scaffolds and relevant cells holds the potential to ra...Cardiac tissue engineering aims to efficiently replace or repair injured heart tissue using scaffolds,relevant cells,or their combination.While the combination of scaffolds and relevant cells holds the potential to rapidly remuscularize the heart,thereby avoiding the slow process of cell recruitment,the proper ex vivo cellularization of a scaffold poses a substantial challenge.First,proper diffusion of nutrients and oxygen should be provided to the cell-seeded scaffold.Second,to generate a functional tissue construct,cells can benefit from physiological-like conditions.To meet these challenges,we developed a modular bioreactor for the dynamic cellularization of full-thickness cardiac scaffolds under synchronized mechanical and electrical stimuli.In this unique bioreactor system,we designed a cyclic mechanical load that mimics the left ventricle volume inflation,thus achieving a steady stimulus,as well as an electrical stimulus with an action potential profile to mirror the cells’microenvironment and electrical stimuli in the heart.These mechanical and electrical stimuli were synchronized according to cardiac physiology and regulated by constant feedback.When applied to a seeded thick porcine cardiac extracellular matrix(pcECM)scaffold,these stimuli improved the proliferation of mesenchymal stem/stromal cells(MSCs)and induced the formation of a dense tissue-like structure near the scaffold’s surface.Most importantly,after 35 d of cultivation,the MSCs presented the early cardiac progenitor markers Connexin-43 andα-actinin,which were absent in the control cells.Overall,this research developed a new bioreactor system for cellularizing cardiac scaffolds under cardiac-like conditions,aiming to restore a sustainable dynamic living tissue that can bear the essential cardiac excitation–contraction coupling.展开更多
Oral and maxillofacial reconstruction represents one of the most complex challenges in plastic and reconstructive surgery,requiring the restoration of both form and function in highly specialized anatomical regions.Tr...Oral and maxillofacial reconstruction represents one of the most complex challenges in plastic and reconstructive surgery,requiring the restoration of both form and function in highly specialized anatomical regions.Traditional strategies,including local flaps and autologous bone grafts,remain fundamental but are limited by donor-site morbidity,tissue availability,and unpredictable outcomes.Recent advances in regenerative medicine have shifted the paradigm from repair to true regeneration,harnessing stem cells,biomaterial scaffolds,and signaling molecules in a synergistic approach.Dental-and craniofacial tissue-derived mesenchymal stem cells,along with adipose-derived stem cells,demonstrate significant potential for alveolar bone repair,periodontal regeneration,and soft tissue augmentation.Innovations in three-dimensional printing and bioactive matrices have enabled precise scaffold design and improved vascularization,thereby enhancing both predictability and esthetic outcomes.This mini review focuses on the synergistic role of stem cells,scaffolds,and signaling molecules in oral and maxillofacial regeneration,with an emphasis on the unique contributions of periodontists.By integrating periodontal biology with reconstructive techniques,a new collaborative framework is emerging to optimize regenerative outcomes.Future research must address clinical translation,large-scale trials,cost-effectiveness,and personalized approaches to fully realize the promise of regenerative surgery.展开更多
Biodegradable shape memory polymers( SMPs) are a class of intelligent materials with great potential for imparting biomaterial scaffolds multifunctionality in the field of tissue engineering and regenerative medicine....Biodegradable shape memory polymers( SMPs) are a class of intelligent materials with great potential for imparting biomaterial scaffolds multifunctionality in the field of tissue engineering and regenerative medicine.In this study,the biodegradable SMP poly( D,L-lactide-co-trimethylene carbonate)( PLMC) incorporated with the dexamethasone( Dex),which was a kind of synthetic bone-formation inducing factor,was fabricated into nanofibers via electrospinning.The morphology,constituent,thermal and mechanical properties of the produced Dex / PLMC composite nanofibers were characterized by scanning electron microscopy( SEM), Fourier transform infrared spectroscopy( FTIR), differential scanning calorimetry( DSC),and tensile testing,respectively.Then,ultrasound was employed as a remote stimulus to regulate the Dex releasing behavior from the composite nanofibers.It was found that the generated Dex /PLMC composite nanofibers had a uniform and smooth morphology with a diameter of ca.564 nm.Mechanical testing results showed that incorporation of the Dex gave rise to improved mechanical performance with the tensile strength,Young's modulus and strainat-break increased by 18.2%,20.0% and 64.4%,respectively.DSC data revealed that the glass transition temperature( Tg) of the composite nanofibers, i.e., the thermal transition temperature( Ttrans) for activating shape memory effect, was 39.7 ℃.Moreover, the release kinetics of the encapsulated Dex in the nanofibers could be manipulated by varying the acoustic power and insonation duration.These results suggested that the newly developed Dex / PLMC nanofibers could be a promising drug delivery system for applications in bone tissue engineering( BTE).展开更多
Bone tissue engineering represents one of the most challenging emergent fields for scientists and clinicians.Current failures of autografts and allografts in many pathological conditions have prompted researchers to f...Bone tissue engineering represents one of the most challenging emergent fields for scientists and clinicians.Current failures of autografts and allografts in many pathological conditions have prompted researchers to find new biomaterials able to promote bone repair or regeneration with specific characteristics of biocompatibility,biodegradability and osteoinductivity.Recent advancements for tissue regeneration in bone defects have occurred by following the diamond concept and combining the use of growth factors and mesenchymal stem cells(MSCs).In particular,a more abundant and easily accessible source of MSCs was recently discovered in adipose tissue.These adipose stem cells(ASCs)can be obtained in large quantities with little donor site morbidity or patient discomfort,in contrast to the invasive and painful isolation of bone marrow MSCs.The osteogenic potential of ASCs on scaffolds has been examined in cell cultures and animal models,with only a few cases reporting the use of ASCs for successful reconstruction or accelerated healing of defects of the skull and jaw in patients.Although these reports extend our limited knowledge concerning the use of ASCs for osseous tissue repair and regeneration,the lack of standardization in applied techniques makes the comparison between studies difficult.Additional clinical trials are needed to assess ASC therapy and address potential ethical and safety concerns,which must be resolved to permit application in regenerative medicine.展开更多
A novel method was proposed to design the structure of a bone tissue engineering scafold based on triply periodic minimal surface.In this method,reverse engineering software was used to reconstruct the surface from po...A novel method was proposed to design the structure of a bone tissue engineering scafold based on triply periodic minimal surface.In this method,reverse engineering software was used to reconstruct the surface from point cloud data.This method overcomes the limitations of commercially available software packages that prevent them from generating models with complex surfaces used for bone tissue engineering scafolds.Additionally,the fluid feld of the scafolds was simulated through a numerical method based on fnite volume and the cell proliferation performance was evaluated via an in vitro experiment.The cell proliferation and the mass flow evaluated in a bioreactor further verifed the flow feld simulated using computational fluid dynamics.The result of this study illustrates that the pressure value drops rapidly from 0.103 Pa to 0.011 Pa in the y-axis direction and the mass flow is unevenly distributed in the outlets.The mass flow in the side outlets is observed to be approximately 24.3 times higher thanthe bottom.Importantly,although the mean value of wall shear stress is signifcantly more than 0.05 Pa,there is stil a large area with a suitable shear stress below 0.05 Pa where most cells can proliferate well.The result shows that th inlet velocity 0.0075 m/s is suitable for cell proliferation in the scafold.This study provides an insight into the design analysis,and in vitro experiment of a bone tissue engineering scafold.展开更多
Tissue engineered scaffold is one of the hopeful therapies for the patients with organ or tissue damages. The key element for a tissue engineered scaffold material is high biocompatibility. Herein the poly (3-hydroxyb...Tissue engineered scaffold is one of the hopeful therapies for the patients with organ or tissue damages. The key element for a tissue engineered scaffold material is high biocompatibility. Herein the poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) film was irradiated by the low temperature atmospheric plasma and then coated by the silk fibroins (SF). After plasma treatment, the surface of PHBHHx film became rougher and more hydrophilic than that of original film. The experiment of PHBHHx flushed by phosphate buffer solution (PBS) proves that the coated SF shows stronger immobilization on the plasma-treated film than that on the untreated film. The cell viability assay demonstrates that SF-coated PHBHHx films treated by the plasma significantly supports the proliferation and growth of the human smooth muscle cells (HSMCs). Furthermore, the scanning electron microscopy and hemotoylin and eosin (HE) staining show that HSMCs formed a cell sub-monolayer and secreted a large amount of extracellular matrix (ECM) on the films after one week's culture. The silk fibroins modify the plasma-treated PHBHHx film, providing a material potentially applicable in the cardiovascular tissue engi-neering.展开更多
Conventional fabrication methods lack the ability to control both macro- and micro-structures of generated scaffolds. Three-dimensional printing is a solid free-form fabrication method that provides novel ways to crea...Conventional fabrication methods lack the ability to control both macro- and micro-structures of generated scaffolds. Three-dimensional printing is a solid free-form fabrication method that provides novel ways to create customized scaffolds with high precision and accuracy. In this study, an electrically controlled cortical impactor was used to induce randomized brain tissue defects. The overall shape of scaffolds was designed using rat-specific anatomical data obtained from magnetic resonance imaging, and the internal structure was created by computer- aided design. As the result of limitations arising from insufficient resolution of the manufacturing process, we magnified the size of the cavity model prototype five-fold to successfully fabricate customized collagen-chitosan scaffolds using three-dimensional printing. Results demonstrated that scaffolds have three-dimensional porous structures, high porosity, highly specific surface areas, pore connectivity and good internal characteristics. Neural stem cells co-cultured with scaffolds showed good viability, indicating good biocompatibility and biodegradability. This technique may be a promising new strategy for regenerating complex damaged brain tissues, and helps pave the way toward personalized medicine.展开更多
Polypyrrole （PPy） is a biocompatible polymer with good conductivity. Studies combining PPy with electrospinning have been reported; however, the associated decrease in PPy conductivity has not yet been resolved. We ...Polypyrrole （PPy） is a biocompatible polymer with good conductivity. Studies combining PPy with electrospinning have been reported; however, the associated decrease in PPy conductivity has not yet been resolved. We embedded PPy into poly（lactic acid） （PLA） nanofibers via electrospinning and fabricated a PLA/PPy nanofibrous scaffold containing 15% PPy with sustained conductivity and aligned topog- raphy, qhere was good biocompatibility between the scaffold and human umbilical cord mesenchymal stem cells as well as Schwann cells. Additionally, the direction of cell elongation on the scaffold was parallel to the direction of fibers. Our findings suggest that the aligned PLA/PPy nanofibrous scaffold is a promising biomaterial for peripheral nerve regeneration.展开更多
The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infan...The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infancy and there are significant challenges to overcome.In the modern era,the scientific community is increasingly turned to natural substances due to their superior biological ability,lower cost,biodegradability,and lower toxicity than synthetic lab-made products.Chitosan is a well-known polysaccharide that has recently garnered a high amount of attention for its biological activities,especially in 3D bone tissue engineering.Chitosan closely matches the native tissues and thus stands out as a popular candidate for bioprinting.This review focuses on the potential of chitosan-based scaffolds for advancements and the drawbacks in bone treatment.Chitosan-based nanocomposites have exhibited strong mechanical strength,water-trapping ability,cellular interaction,and biodegradability.Chitosan derivatives have also encouraged and provided different routes for treatment and enhanced biological activities.3D tailored bioprinting has opened new doors for designing and manufacturing scaffolds with biological,mechanical,and topographical properties.展开更多
Spinal cord injury usually leads to permanent disability, which could cause a huge financial problem to the patient. Up to now there is no effective method to treat this disease. The key of the treatment is to enable ...Spinal cord injury usually leads to permanent disability, which could cause a huge financial problem to the patient. Up to now there is no effective method to treat this disease. The key of the treatment is to enable the damage zone axonal regeneration and luckily it could go through the damage zone; last a connection can be established with the target neurons. This study attempts to combine stem cell, material science and genetic modification technology together, by preparing two genes modified adipose-derived stem cells and inducing them into neuron direction; then by compositing them on the silk fibroin/chitosan scaffold and implanting them into the spinal cord injury model, seed cells can have features of neuron cells. At the same time, it could stably express the brain-derived neurotrophic factor and neurotrophin-3, both of which could produce synergistic effects, which have a positive effect on the recovery of spinal cord. The spinal cord scaffold bridges the broken end of the spinal cord and isolates with the surrounding environment, which could avoid a scar effect on the nerve regeneration and provide three-dimensional space for the seed cell growth, and at last we hope to provide a new treatment for spinal cord injury with the tissue engineering technique.展开更多
Major advances are currently being made in regenerative medicine for cornea. Stem cell-based therapies represent a novel strategy that may substitute conventional corneal transplantation, albeit there aremany challeng...Major advances are currently being made in regenerative medicine for cornea. Stem cell-based therapies represent a novel strategy that may substitute conventional corneal transplantation, albeit there aremany challenges ahead given the singularities of each cellular layer of the cornea. This review recapitulates the current data on corneal epithelial stem cells, corneal stromal stem cells and corneal endothelial cell progenitors. Corneal limbal autografts containing epithelial stem cells have been transplanted in humans for more than 20 years with great successful rates, and researchers now focus on ex vivo cultures and other cell lineages to transplant to the ocular surface. A small population of cells in the corneal endothelium was recently reported to have self-renewal capacity, although they do not proliferate in vivo. Two main obstacles have hindered endothelial cell transplantation to date: culture protocols and cell delivery methods to the posterior cornea in vivo. Human corneal stromal stem cells have been identified shortly after the recognition of precursors of endothelial cells. Stromal stem cells may have the potential to provide a direct cell-based therapeutic approach when injected to corneal scars. Furthermore, they exhibit the ability to deposit organized connective tissue in vitro and may be useful in corneal stroma engineering in the future. Recent advances and future perspectives in the field are discussed.展开更多
Peripheral nerve injury is a common clinical problem and affects the quality of life of patients. Traditional restoration methods are not satisfactory. Researchers increasingly focus on the field of tissue engineering...Peripheral nerve injury is a common clinical problem and affects the quality of life of patients. Traditional restoration methods are not satisfactory. Researchers increasingly focus on the field of tissue engineering. The three key points in establishing a tissue engineering material are the biological scaffold material, the seed cells and various growth factors. Understanding the type of nerve injury, the construction of scaffold and the process of repair are necessary to solve peripheral nerve injury and promote its regeneration. This review describes the categories of peripheral nerve injury, fundamental research of peripheral nervous tissue engineering and clinical research on peripheral nerve scaffold material, and paves a way for related research and the use of conduits in clinical practice.展开更多
Repair and regeneration of articular cartilage has always been a major challenge in the medical field due to its peculiar structure(e.g.sparsely distributed chondrocytes,no blood supply).Cartilage tissue engineering i...Repair and regeneration of articular cartilage has always been a major challenge in the medical field due to its peculiar structure(e.g.sparsely distributed chondrocytes,no blood supply).Cartilage tissue engineering is one promising strategy for cartilage repair,however,one critical issue for cartilage tissue engineering is the integration between tissue-engineered and native cartilage.In recent years,osteochondral tissue engineering has attracted growing interest for overcoming this problem.Herein,we review the development of osteochondral tissue engineering.Firstly,currently used seed cells in osteochondral tissue engineering will be described.Secondly,several types of scaffolds and their(dis)advantage for osteochondral tissue engineering will be introduced.Thirdly,the growth factors currently used in osteochondral tissue engineering will be presented and discussed.展开更多
Biomedical scaffold fabrication has seen advancements in mimicking the native extracellular matrix through intricate three-dimensional(3D)structures conducive to tissue regeneration.Coiled fibrous scaffolds have emerg...Biomedical scaffold fabrication has seen advancements in mimicking the native extracellular matrix through intricate three-dimensional(3D)structures conducive to tissue regeneration.Coiled fibrous scaffolds have emerged as promising substrates owing to their ability to provide unique topographical cues.In this study,coiled poly(ε-caprolactone)(PCL)fibrous bundles were fabricated using an alginate-based composite system,and processed with 3D printing.The unique structure was obtained through the die-swell phenomenon related to the release of residual stresses from the printed strut,thereby transforming aligned PCL fibers into coiled structures.The effects of printing parameters,such as pneumatic pressure and nozzle moving speed,on fiber morphology were investigated to ensure a consistent formation of coiled PCL fibers.The resulting coiled PCL fibrous scaffold demonstrated higher activation of mechanotransduction signaling as well as upregulation of osteogenic-related genes in human adipose stem cells(hASCs),supporting its potential in bone tissue engineering.展开更多
The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of...The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of Three-Dimensional(3D)-printed Polycaprolactone(PCL)scaffolds with varying proportions of Nanohydroxyapatite(NHA)and Nanoclay(NC),and their physiochemical and biological properties were assessed.The mechanical properties of PCL are satisfactory;however,its hydrophobic nature and long-term degradation hinder its use in scaffold fabrication.NHA and NC have been employed to improve the hydrophilic characteristics,mechanical strength,adhesive properties,biocompatibility,biodegradability,and osteoconductive behavior of PCL.The morphology results demonstrated 3D-printed structures with interconnected rectangular macropores and proper nanoparticle distribution.The sample containing 70 wt%NC showed the highest porosity(65.98±2.54%),leading to an increased degradation rate.The compressive strength ranged from 10.65±1.90 to 84.93±9.93 MPa,which is directly proportional to the compressive strength of cancellous bone(2–12 MPa).The wettability,water uptake,and biodegradability of PCL scaffolds considerably improved as the amount of NC increased.The results of the cellular assays exhibited increased proliferation,viability,and adhesion of MG-63 cells due to the addition of NHA and NC to the scaffolds.Finally,according to the in vitro results,it can be concluded that 3D-printed samples with higher amounts of NC can be regarded as a suitable scaffold for expediting the regeneration process of bone defects.展开更多
基金National Natural Science Foundations of China，Science and Technology Commission of Shanghai Municipality,China，Ph.D.Programs Foundation of Ministry of Education of China
文摘Recent years, it has attracted more attentions to increase the porosity and pore size of nanofibrous scaffolds to provide the for the cells to grow into the small-diameter vascular grafts. In this study, a novel bi-layer tubular scaffold with an inner layer and an outer layer was fabricated. The inner layer was random collagen/poly （ L-lactide-co-caprolactone ） I P （ LLA- CL） ] nanofibrous mat fabricated by conventional electrospinning and the outer layer was aligned collagen/P （LLA-CL） nanoyarns prepared by a dynamic liquid dectrospinning method. Fourier transform infrared spectroscopy （FTIR） was used to characterize the chemical structure. Scanning electron microscopy （ SEM ） was employed to observe the morphology of the layers and the cross- sectioned bi-layer tubular scaffold. A liquid displacement method was employed to measure the porosities of the inner and outer layers. Stress-strain curves were obtained to evaluate the mechanical properties of the two different layers and the bi-layer membrane. The diameters of the nanofibers and the nanoyarns were （480 ± 197 ） nm and （ 19.66 ± 4.05 ） μm, respectively. The outer layer had a significantly higher porosity and a larger pore size than those of the inner layer. Furthermore, the bi-layer membrane showed a good mechanical property which was suitable as small-diameter vascular graft. The results indicated that the bi-layer tubular scaffold had a great potential application in small vascular tissue engineering.
基金Supported by the Agencia Nacional de Producción Científica y Tecnológica(ANPCyT),No.ANR BIO 0032/10
文摘The reconstitution of a fully organized and functional hair follicle from dissociated cells propagated under defined tissue culture conditions is a challenge stillpending in tissue engineering. The loss of hair follicles caused by injuries or pathologies such as alopecia not only affects the patients' psychological well-being, but also endangers certain inherent functions of the skin. It is then of great interest to find different strategies aiming to regenerate or neogenerate the hair follicle under conditions proper of an adult individual. Based upon current knowledge on the epithelial and dermal cells and their interactions during the embryonic hair generation and adult hair cycling, many researchers have tried to obtain mature hair follicles using different strategies and approaches depending on the causes of hair loss. This review summarizes current advances in the different experimental strategies to regenerate or neogenerate hair follicles, with emphasis on those involving neogenesis of hair follicles in adult individuals using isolated cells and tissue engineering. Most of these experiments were performed using rodent cells, particularly from embryonic or newborn origin. However, no successful strategy to generate human hair follicles from adult cells has yet been reported. This review identifies several issues that should be considered to achieve this objective. Perhaps the most important challenge is to provide threedimensional culture conditions mimicking the structure of living tissue. Improving culture conditions that allow the expansion of specific cells while protecting their inductive properties, as well as methods for selecting populations of epithelial stem cells, should give us the necessary tools to overcome the difficulties that constrain human hair follicle neogenesis. An analysis of patent trends shows that the number of patent applications aimed at hair follicle regeneration and neogenesis has been increasing during the last decade. This field is attractive not only to academic researchers but also to the companies that own almost half of the patents in this field.
文摘Derma is progenitor cells sours, that are able to differentiate further in several mesodermal lineage and neural and endodermal lineage. Culture conditions, skin taking site and culture medium composition considerably contribute to it. Spheroid cultured mesenchymal dermal cells contribution to skin regeneration in granulating wound in rat model was estimated.
文摘The knee is a multi-component organ system comprised of several tissues which function coordinately to provide mobility. Injury to any one component compromises the integrity of the system and leads to adaptation of the other components. Over time, such events often lead to dysfunction and degeneration of the knee. Therefore, there has been considerable research emphasis to repair injured components in the knee including cartilage, menisci, and ligaments. Approaches to improving healing and repair/regeneration of knee tissues have included surgery, anti-sense gene therapy, injection of growth factors and inflammatory cytokine antagonists, transplantation of in vitro expanded chondrocytes, enhancement of endogenous cells via microfracture, injection of mesenchymal stem cells, and implantation of in vitro tissue engineered constructs. Some of these approaches have lead to temporary improvement in knee functioning, while others offer the potential to restore function and tissue integrity for longer periods of time. This article will review the status of many of these approaches, and provide a perspective on their limitations and potential to contribute to restoration of knee function across the lifespan.
文摘Tissue engineering and regenera-tive medicine have shown signifi-cant potential for repairing and regenerating damaged tissues and can be used to provide personalized treatment plans,with broad applica-tion prospects.In this special issue,Bin Li’s team outlines the latest advances in minimally invasive implantable biomaterials for bone regeneration and different methods of achieving osteogenesis,with a focus on bioceramics and polymer materials and their applications in bone healing,vertebral augmenta-tion,implant fixation,tumor treatment of bone,and treatment of infections related to bone defects.Xinquan Jiang’s team constructs a novel photo-responsive multifunctional polyetheretherketone(PEEK)-based implant material(sPEEK/BP/E7)through the self-assembly of black phosphorus(BP)nanoplatelets,bioinspired poly-dopamine(PDA),and the biologically active short peptide E7 on sPEEK.The material exhibits effective osteogenic effects and good sterilization performance,providing a new idea for clinical application.
基金funded by the Israeli Ministry of Innovation,Science and Technology(Grant No.3-11873)the Israel Science Foundation(Grant No.1563/10)+1 种基金the Randy L.and Melvin R.Berlin Family Research Center for Regenerative Medicinethe Gurwin Family Foundation.
文摘Cardiac tissue engineering aims to efficiently replace or repair injured heart tissue using scaffolds,relevant cells,or their combination.While the combination of scaffolds and relevant cells holds the potential to rapidly remuscularize the heart,thereby avoiding the slow process of cell recruitment,the proper ex vivo cellularization of a scaffold poses a substantial challenge.First,proper diffusion of nutrients and oxygen should be provided to the cell-seeded scaffold.Second,to generate a functional tissue construct,cells can benefit from physiological-like conditions.To meet these challenges,we developed a modular bioreactor for the dynamic cellularization of full-thickness cardiac scaffolds under synchronized mechanical and electrical stimuli.In this unique bioreactor system,we designed a cyclic mechanical load that mimics the left ventricle volume inflation,thus achieving a steady stimulus,as well as an electrical stimulus with an action potential profile to mirror the cells’microenvironment and electrical stimuli in the heart.These mechanical and electrical stimuli were synchronized according to cardiac physiology and regulated by constant feedback.When applied to a seeded thick porcine cardiac extracellular matrix(pcECM)scaffold,these stimuli improved the proliferation of mesenchymal stem/stromal cells(MSCs)and induced the formation of a dense tissue-like structure near the scaffold’s surface.Most importantly,after 35 d of cultivation,the MSCs presented the early cardiac progenitor markers Connexin-43 andα-actinin,which were absent in the control cells.Overall,this research developed a new bioreactor system for cellularizing cardiac scaffolds under cardiac-like conditions,aiming to restore a sustainable dynamic living tissue that can bear the essential cardiac excitation–contraction coupling.
文摘Oral and maxillofacial reconstruction represents one of the most complex challenges in plastic and reconstructive surgery,requiring the restoration of both form and function in highly specialized anatomical regions.Traditional strategies,including local flaps and autologous bone grafts,remain fundamental but are limited by donor-site morbidity,tissue availability,and unpredictable outcomes.Recent advances in regenerative medicine have shifted the paradigm from repair to true regeneration,harnessing stem cells,biomaterial scaffolds,and signaling molecules in a synergistic approach.Dental-and craniofacial tissue-derived mesenchymal stem cells,along with adipose-derived stem cells,demonstrate significant potential for alveolar bone repair,periodontal regeneration,and soft tissue augmentation.Innovations in three-dimensional printing and bioactive matrices have enabled precise scaffold design and improved vascularization,thereby enhancing both predictability and esthetic outcomes.This mini review focuses on the synergistic role of stem cells,scaffolds,and signaling molecules in oral and maxillofacial regeneration,with an emphasis on the unique contributions of periodontists.By integrating periodontal biology with reconstructive techniques,a new collaborative framework is emerging to optimize regenerative outcomes.Future research must address clinical translation,large-scale trials,cost-effectiveness,and personalized approaches to fully realize the promise of regenerative surgery.
基金the Fundamental Research Funds for the Central Universities,China(No.14D110519)Pujiang Talent Program Funded by the Science and Technology Commission of Shanghai Municipality,China(No.10PJ1400200)National Natural Science Foundation of China(No.51073032)
文摘Biodegradable shape memory polymers( SMPs) are a class of intelligent materials with great potential for imparting biomaterial scaffolds multifunctionality in the field of tissue engineering and regenerative medicine.In this study,the biodegradable SMP poly( D,L-lactide-co-trimethylene carbonate)( PLMC) incorporated with the dexamethasone( Dex),which was a kind of synthetic bone-formation inducing factor,was fabricated into nanofibers via electrospinning.The morphology,constituent,thermal and mechanical properties of the produced Dex / PLMC composite nanofibers were characterized by scanning electron microscopy( SEM), Fourier transform infrared spectroscopy( FTIR), differential scanning calorimetry( DSC),and tensile testing,respectively.Then,ultrasound was employed as a remote stimulus to regulate the Dex releasing behavior from the composite nanofibers.It was found that the generated Dex /PLMC composite nanofibers had a uniform and smooth morphology with a diameter of ca.564 nm.Mechanical testing results showed that incorporation of the Dex gave rise to improved mechanical performance with the tensile strength,Young's modulus and strainat-break increased by 18.2%,20.0% and 64.4%,respectively.DSC data revealed that the glass transition temperature( Tg) of the composite nanofibers, i.e., the thermal transition temperature( Ttrans) for activating shape memory effect, was 39.7 ℃.Moreover, the release kinetics of the encapsulated Dex in the nanofibers could be manipulated by varying the acoustic power and insonation duration.These results suggested that the newly developed Dex / PLMC nanofibers could be a promising drug delivery system for applications in bone tissue engineering( BTE).
基金Supported by The Regione Toscana-POR CRO FSE 2007-2013 and I.F.B.STRODER s.r.l
文摘Bone tissue engineering represents one of the most challenging emergent fields for scientists and clinicians.Current failures of autografts and allografts in many pathological conditions have prompted researchers to find new biomaterials able to promote bone repair or regeneration with specific characteristics of biocompatibility,biodegradability and osteoinductivity.Recent advancements for tissue regeneration in bone defects have occurred by following the diamond concept and combining the use of growth factors and mesenchymal stem cells(MSCs).In particular,a more abundant and easily accessible source of MSCs was recently discovered in adipose tissue.These adipose stem cells(ASCs)can be obtained in large quantities with little donor site morbidity or patient discomfort,in contrast to the invasive and painful isolation of bone marrow MSCs.The osteogenic potential of ASCs on scaffolds has been examined in cell cultures and animal models,with only a few cases reporting the use of ASCs for successful reconstruction or accelerated healing of defects of the skull and jaw in patients.Although these reports extend our limited knowledge concerning the use of ASCs for osseous tissue repair and regeneration,the lack of standardization in applied techniques makes the comparison between studies difficult.Additional clinical trials are needed to assess ASC therapy and address potential ethical and safety concerns,which must be resolved to permit application in regenerative medicine.
基金Supported by National Natural Science Foundation of China(Grant Nos.51675312,51375273)
文摘A novel method was proposed to design the structure of a bone tissue engineering scafold based on triply periodic minimal surface.In this method,reverse engineering software was used to reconstruct the surface from point cloud data.This method overcomes the limitations of commercially available software packages that prevent them from generating models with complex surfaces used for bone tissue engineering scafolds.Additionally,the fluid feld of the scafolds was simulated through a numerical method based on fnite volume and the cell proliferation performance was evaluated via an in vitro experiment.The cell proliferation and the mass flow evaluated in a bioreactor further verifed the flow feld simulated using computational fluid dynamics.The result of this study illustrates that the pressure value drops rapidly from 0.103 Pa to 0.011 Pa in the y-axis direction and the mass flow is unevenly distributed in the outlets.The mass flow in the side outlets is observed to be approximately 24.3 times higher thanthe bottom.Importantly,although the mean value of wall shear stress is signifcantly more than 0.05 Pa,there is stil a large area with a suitable shear stress below 0.05 Pa where most cells can proliferate well.The result shows that th inlet velocity 0.0075 m/s is suitable for cell proliferation in the scafold.This study provides an insight into the design analysis,and in vitro experiment of a bone tissue engineering scafold.
文摘Tissue engineered scaffold is one of the hopeful therapies for the patients with organ or tissue damages. The key element for a tissue engineered scaffold material is high biocompatibility. Herein the poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) film was irradiated by the low temperature atmospheric plasma and then coated by the silk fibroins (SF). After plasma treatment, the surface of PHBHHx film became rougher and more hydrophilic than that of original film. The experiment of PHBHHx flushed by phosphate buffer solution (PBS) proves that the coated SF shows stronger immobilization on the plasma-treated film than that on the untreated film. The cell viability assay demonstrates that SF-coated PHBHHx films treated by the plasma significantly supports the proliferation and growth of the human smooth muscle cells (HSMCs). Furthermore, the scanning electron microscopy and hemotoylin and eosin (HE) staining show that HSMCs formed a cell sub-monolayer and secreted a large amount of extracellular matrix (ECM) on the films after one week's culture. The silk fibroins modify the plasma-treated PHBHHx film, providing a material potentially applicable in the cardiovascular tissue engi-neering.
基金supported by the National Natural Science Foundation of China,No.81301050,81401067,81271392,81471275,81541034the Natural Science Foundation of Tianjin City of China,No.14JCQNJC10200,15JCQNJC11100,16JCYBJC27600
文摘Conventional fabrication methods lack the ability to control both macro- and micro-structures of generated scaffolds. Three-dimensional printing is a solid free-form fabrication method that provides novel ways to create customized scaffolds with high precision and accuracy. In this study, an electrically controlled cortical impactor was used to induce randomized brain tissue defects. The overall shape of scaffolds was designed using rat-specific anatomical data obtained from magnetic resonance imaging, and the internal structure was created by computer- aided design. As the result of limitations arising from insufficient resolution of the manufacturing process, we magnified the size of the cavity model prototype five-fold to successfully fabricate customized collagen-chitosan scaffolds using three-dimensional printing. Results demonstrated that scaffolds have three-dimensional porous structures, high porosity, highly specific surface areas, pore connectivity and good internal characteristics. Neural stem cells co-cultured with scaffolds showed good viability, indicating good biocompatibility and biodegradability. This technique may be a promising new strategy for regenerating complex damaged brain tissues, and helps pave the way toward personalized medicine.
基金financially supported by Tsinghua University Initiative Scientific Research Program,No.20131089199the National Key Research and Development Program of China,No.2016YFB0700802the National Program on Key Basic Research Project of China(973 Program),No.2012CB518106,2014CB542201
文摘Polypyrrole （PPy） is a biocompatible polymer with good conductivity. Studies combining PPy with electrospinning have been reported; however, the associated decrease in PPy conductivity has not yet been resolved. We embedded PPy into poly（lactic acid） （PLA） nanofibers via electrospinning and fabricated a PLA/PPy nanofibrous scaffold containing 15% PPy with sustained conductivity and aligned topog- raphy, qhere was good biocompatibility between the scaffold and human umbilical cord mesenchymal stem cells as well as Schwann cells. Additionally, the direction of cell elongation on the scaffold was parallel to the direction of fibers. Our findings suggest that the aligned PLA/PPy nanofibrous scaffold is a promising biomaterial for peripheral nerve regeneration.
文摘The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infancy and there are significant challenges to overcome.In the modern era,the scientific community is increasingly turned to natural substances due to their superior biological ability,lower cost,biodegradability,and lower toxicity than synthetic lab-made products.Chitosan is a well-known polysaccharide that has recently garnered a high amount of attention for its biological activities,especially in 3D bone tissue engineering.Chitosan closely matches the native tissues and thus stands out as a popular candidate for bioprinting.This review focuses on the potential of chitosan-based scaffolds for advancements and the drawbacks in bone treatment.Chitosan-based nanocomposites have exhibited strong mechanical strength,water-trapping ability,cellular interaction,and biodegradability.Chitosan derivatives have also encouraged and provided different routes for treatment and enhanced biological activities.3D tailored bioprinting has opened new doors for designing and manufacturing scaffolds with biological,mechanical,and topographical properties.
文摘Spinal cord injury usually leads to permanent disability, which could cause a huge financial problem to the patient. Up to now there is no effective method to treat this disease. The key of the treatment is to enable the damage zone axonal regeneration and luckily it could go through the damage zone; last a connection can be established with the target neurons. This study attempts to combine stem cell, material science and genetic modification technology together, by preparing two genes modified adipose-derived stem cells and inducing them into neuron direction; then by compositing them on the silk fibroin/chitosan scaffold and implanting them into the spinal cord injury model, seed cells can have features of neuron cells. At the same time, it could stably express the brain-derived neurotrophic factor and neurotrophin-3, both of which could produce synergistic effects, which have a positive effect on the recovery of spinal cord. The spinal cord scaffold bridges the broken end of the spinal cord and isolates with the surrounding environment, which could avoid a scar effect on the nerve regeneration and provide three-dimensional space for the seed cell growth, and at last we hope to provide a new treatment for spinal cord injury with the tissue engineering technique.
文摘Major advances are currently being made in regenerative medicine for cornea. Stem cell-based therapies represent a novel strategy that may substitute conventional corneal transplantation, albeit there aremany challenges ahead given the singularities of each cellular layer of the cornea. This review recapitulates the current data on corneal epithelial stem cells, corneal stromal stem cells and corneal endothelial cell progenitors. Corneal limbal autografts containing epithelial stem cells have been transplanted in humans for more than 20 years with great successful rates, and researchers now focus on ex vivo cultures and other cell lineages to transplant to the ocular surface. A small population of cells in the corneal endothelium was recently reported to have self-renewal capacity, although they do not proliferate in vivo. Two main obstacles have hindered endothelial cell transplantation to date: culture protocols and cell delivery methods to the posterior cornea in vivo. Human corneal stromal stem cells have been identified shortly after the recognition of precursors of endothelial cells. Stromal stem cells may have the potential to provide a direct cell-based therapeutic approach when injected to corneal scars. Furthermore, they exhibit the ability to deposit organized connective tissue in vitro and may be useful in corneal stroma engineering in the future. Recent advances and future perspectives in the field are discussed.
基金supported by the National Natural Science Foundation of China,No.31040043,31671248(to NH),No.81171146,81372044,30971526(to BGJ)the Chinese National Ministry of Science and Technology(973 Project),No.2014CB542201(to PXZ)+4 种基金the Ministry of Education Innovation Team,China,No.IRT1201(to PXZ)the Fostering Young Scholars of Peking University Health Science Center,China,No.BMU2017PY013(to PXZ)the Chinese National General Program of National Natural Science Fund,China(to PXZ)the Beijing City Science&Technology New Star Cross Project,China,No.2018019(to PXZ)the National Natural Science Foundation of China,No.31771322,31571235,51373023,21171019,31640045,31571236,31471144,31100860,31371210(to PXZ)
文摘Peripheral nerve injury is a common clinical problem and affects the quality of life of patients. Traditional restoration methods are not satisfactory. Researchers increasingly focus on the field of tissue engineering. The three key points in establishing a tissue engineering material are the biological scaffold material, the seed cells and various growth factors. Understanding the type of nerve injury, the construction of scaffold and the process of repair are necessary to solve peripheral nerve injury and promote its regeneration. This review describes the categories of peripheral nerve injury, fundamental research of peripheral nervous tissue engineering and clinical research on peripheral nerve scaffold material, and paves a way for related research and the use of conduits in clinical practice.
文摘Repair and regeneration of articular cartilage has always been a major challenge in the medical field due to its peculiar structure(e.g.sparsely distributed chondrocytes,no blood supply).Cartilage tissue engineering is one promising strategy for cartilage repair,however,one critical issue for cartilage tissue engineering is the integration between tissue-engineered and native cartilage.In recent years,osteochondral tissue engineering has attracted growing interest for overcoming this problem.Herein,we review the development of osteochondral tissue engineering.Firstly,currently used seed cells in osteochondral tissue engineering will be described.Secondly,several types of scaffolds and their(dis)advantage for osteochondral tissue engineering will be introduced.Thirdly,the growth factors currently used in osteochondral tissue engineering will be presented and discussed.
基金supported by the‘Korea National Institute of Health’research project(2022ER130502)a grant from by SMC-SKKU Future Convergence Academic Research Program,2024supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(RS-2024-00336758)。
文摘Biomedical scaffold fabrication has seen advancements in mimicking the native extracellular matrix through intricate three-dimensional(3D)structures conducive to tissue regeneration.Coiled fibrous scaffolds have emerged as promising substrates owing to their ability to provide unique topographical cues.In this study,coiled poly(ε-caprolactone)(PCL)fibrous bundles were fabricated using an alginate-based composite system,and processed with 3D printing.The unique structure was obtained through the die-swell phenomenon related to the release of residual stresses from the printed strut,thereby transforming aligned PCL fibers into coiled structures.The effects of printing parameters,such as pneumatic pressure and nozzle moving speed,on fiber morphology were investigated to ensure a consistent formation of coiled PCL fibers.The resulting coiled PCL fibrous scaffold demonstrated higher activation of mechanotransduction signaling as well as upregulation of osteogenic-related genes in human adipose stem cells(hASCs),supporting its potential in bone tissue engineering.
文摘The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of Three-Dimensional(3D)-printed Polycaprolactone(PCL)scaffolds with varying proportions of Nanohydroxyapatite(NHA)and Nanoclay(NC),and their physiochemical and biological properties were assessed.The mechanical properties of PCL are satisfactory;however,its hydrophobic nature and long-term degradation hinder its use in scaffold fabrication.NHA and NC have been employed to improve the hydrophilic characteristics,mechanical strength,adhesive properties,biocompatibility,biodegradability,and osteoconductive behavior of PCL.The morphology results demonstrated 3D-printed structures with interconnected rectangular macropores and proper nanoparticle distribution.The sample containing 70 wt%NC showed the highest porosity(65.98±2.54%),leading to an increased degradation rate.The compressive strength ranged from 10.65±1.90 to 84.93±9.93 MPa,which is directly proportional to the compressive strength of cancellous bone(2–12 MPa).The wettability,water uptake,and biodegradability of PCL scaffolds considerably improved as the amount of NC increased.The results of the cellular assays exhibited increased proliferation,viability,and adhesion of MG-63 cells due to the addition of NHA and NC to the scaffolds.Finally,according to the in vitro results,it can be concluded that 3D-printed samples with higher amounts of NC can be regarded as a suitable scaffold for expediting the regeneration process of bone defects.
