In this article, we consider a two-dimensional symmetric space-fractional diffusion equation in which the space fractional derivatives are defined in Riesz potential sense. The well-posed feature is guaranteed by ener...In this article, we consider a two-dimensional symmetric space-fractional diffusion equation in which the space fractional derivatives are defined in Riesz potential sense. The well-posed feature is guaranteed by energy inequality. To solve the diffusion equation, a fully discrete form is established by employing Crank-Nicolson technique in time and Galerkin finite element method in space. The stability and convergence are proved and the stiffness matrix is given analytically. Three numerical examples are given to confirm our theoretical analysis in which we find that even with the same initial condition, the classical and fractional diffusion equations perform differently but tend to be uniform diffusion at last.展开更多
The stress combination method for the fatigue assessment of the hatch comer of a bulk carrier was investigated based on equivalent waves. The principles of the equivalent waves of ship structures were given, including...The stress combination method for the fatigue assessment of the hatch comer of a bulk carrier was investigated based on equivalent waves. The principles of the equivalent waves of ship structures were given, including the determination of the dominant load parameter, heading, frequency, and amplitude of the equivalent regular waves. The dominant load parameters of the hatch comer of a bulk carrier were identified by the structural stress response analysis, and then a series of equivalent regular waves were defined based on these parameters. A combination method of the structural stress ranges under the different equivalent waves was developed for the fatigue analysis. The combination factors were obtained by least square regression analysis with the stress ranges derived from spectral fatigue analysis as the target value. The proposed method was applied to the hatch comer of another bulk carrier as an example. This shows that the results from the equivalent wave approach agree well with those from the spectral fatigue analysis. The workload is reduced substantially. This method can be referenced in the fatigue assessment of the hatch comer of a bulk carrier.展开更多
In this paper, simulation of InAs/GaAs quantum dot (QD) laser is performed based upon a set of eight rate equations for the carriers and photons in five energy states. Carrier dynamics in these lasers were under analy...In this paper, simulation of InAs/GaAs quantum dot (QD) laser is performed based upon a set of eight rate equations for the carriers and photons in five energy states. Carrier dynamics in these lasers were under analysis and the rate equations are solved using 4th order Runge-Kutta method. We have shown that by increasing injected current to the active medium of laser, switching-on and stability time of the system would decrease and power peak and stationary power will be increased. Also, emission in any state will start when the lower state is saturated and remain steady. The results including P-I characteristic curve for the ground state (GS), first excited state (ES1), second excited state (ES2) and output power of the QD laser will be presented.展开更多
A new acquisition and tracking method is proposed for signal processing under the new signal system structure of Beidou-3 navigation satellite system(BDS-3). By starting with the analysis of the characteristics and si...A new acquisition and tracking method is proposed for signal processing under the new signal system structure of Beidou-3 navigation satellite system(BDS-3). By starting with the analysis of the characteristics and signal structure of the new signal, the local replica of the ranging code and the study of the characteristics of the ranging code are completed, which proves that the method in this paper can be used in the subsequent acquisition and tracking process. The fast Fourier transformation(FFT) search based on longer coherence time and the adaptive phase-frequency switching carrier tracking loop are proposed for signals in different modulation modes. The actual signal of Beidou-3 satellite is sampled by local experiment, and the acquisition and tracking of the Beidou-3 satellite multi-band signal is finally completed. The tracking results verify the feasibility of the proposed acquisition and tracking method.展开更多
Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper ...Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper proposes an Adaptive Terminal Sliding Combined Super TwistingControl(ATS-STC)method to address the issues of low precision,slow convergence,and poor dis-turbance rejection capability resulting from external disturbances,such as carrier air-wake and deckmotion.By introducing a nonlinear term into the sliding surface and employing an integralapproach,the proposed ATS-STC method can ensure finite-time convergence and mitigate the chat-tering problem.An adaptive law is also utilized to estimate the external disturbances,therebyenhancing the anti-disturbance performance.Then,the stability and convergence time analysis ofthe designed controller are conducted.Based on the proposed method,an Automatic Carrier Land-ing System(ACLS)is developed to perform the carrier landing control task.Furthermore,a multi-dimensional validation is carried out.For the numerical simulation test,the Terminal Sliding ModeControl(TSMC)method and Proportion Integration Differentiation(PID)method are introducedas comparison,the quantitative assessment results show that the tracking error of TSMC and PIDcan reach 1.5 times and 2 times that of the proposed method.Finally,the Hardware-in-the-Loop(HIL)test and real flight test are conducted.All the experimental results demonstrate that the pro-posed control method is more effective and precise.展开更多
Purpose–As an important part of the management of railway passenger transport,the rationality and effectiveness of the clearing method of railway passenger transport are directly related to the operating efficiency a...Purpose–As an important part of the management of railway passenger transport,the rationality and effectiveness of the clearing method of railway passenger transport are directly related to the operating efficiency and service quality of railway passenger transport enterprises.This paper aims to comprehensively and deeply discuss the evolution and development process of China’s railway passenger transport clearing method,analyze its characteristics and influences in each stage,identify the main factors affecting its evolution and development and then put forward thoughts on improving the future development of the clearing method.Design/methodology/approach–Through a detailed review of the railway passenger transport clearing methods from the planned economy period to the reform and opening up period and into the new century,the basis,mode,subject and object of clearing in different development stages are systematically compared.Findings–It comprehensively reveals the evolution of the clearing method,sorted out the characteristics and changes of the clearing method at each stage and the adaptability to the development of railway passenger transport at that time.The characteristics of the development of clearing measures for railway passenger transport in different stages and their far-reaching influence on railway passenger transport business are deeply analyzed.Originality/value–This paper summarized the factors influencing the development of China’s railway passenger transportation clearing approach evolution,including the simplified rules of clearing,enhanced the market adaptability,establishing and perfecting the incentive mechanism,strengthening the construction of informatization,etc.This paper puts forward the ways to improve the railway passenger transportation clearing future development thinking.展开更多
An efficient method to track the carrier frequency which is recommended to use in low earth orbit(LEO) direct-sequence spread-spectrum(DS/SS) communication system is given. The carrier frequency drifts quicker in LEO ...An efficient method to track the carrier frequency which is recommended to use in low earth orbit(LEO) direct-sequence spread-spectrum(DS/SS) communication system is given. The carrier frequency drifts quicker in LEO DS/SS communication system, its tracking problem becomes much more important especially in digital receiver with the limits of physical shape and power. Under the condition of coarse carrier frequency synchronization, a digital tracking method based on least square method(LSM) is proved to be a quick, simple and efficient method. Numerical results and charts are given.展开更多
The relationship between the vapor pressure of liquid copper and the flow rate of carrier gas argon was discussed, when the carrier gas method was used to determine the vapor pressure of liquid copper at 1892 K. The p...The relationship between the vapor pressure of liquid copper and the flow rate of carrier gas argon was discussed, when the carrier gas method was used to determine the vapor pressure of liquid copper at 1892 K. The proper argon flow rate range obtained was 150-500 mL/min and enough evidence was provided to verify the vapor pressure-flow rate of carrier gas relationship at the target temperature. Based on the proper flow rate range, the vapor pressure of liquid copper was measured at 1609-1892 K. The relationship of vapor pressure-temperature obtained by the method of regression analysis can be expressed as： In（p/Pa） = （25.470 -I- 0.903） - （39099.8 -4- 1574.5）/T, Further, the thermodynamic properties including the heat of vaporization and the Gibbs free energy of the Cu （I） = Cu （g） reaction were calculated by the vapor pressiJre obtained over the temperature range covered.展开更多
A novel fiber Bragg grating （FBG） sensor array system based on digital phase generated carrier （PGC） demodulation and reference compensation method is proposed and set up. Experimental results confirm that the dig...A novel fiber Bragg grating （FBG） sensor array system based on digital phase generated carrier （PGC） demodulation and reference compensation method is proposed and set up. Experimental results confirm that the digital PGC demodulation can be used for wavelength-division-multiplexed FBG sensor array and the reference compensation method can reduce the environmental interference by approximately 40 dB in the frequency range from 20 Hz to 2 kHz. The minimum detectable wavelength-shift of the sensor system is 1 × 10^-3 pm/Hz^1/2.展开更多
The Product Development and Management Association(PDMA)comparative performance assessment studies(CPAS)teach us that the new product development(NPD)and innovation management practices continue to evolve.However,adva...The Product Development and Management Association(PDMA)comparative performance assessment studies(CPAS)teach us that the new product development(NPD)and innovation management practices continue to evolve.However,advances in the practice of NPD and innovation did not yield significant increases in new product success rates.However,the PDMA 2003 CPAS reported a significant difference in the success rates for top performing businesses versus the"rest".This paper summarizes innovation practices of top performing businesses from CPAS and compares them with the practices of PDMA Outstanding Corporate Innovator(OCI)Award winning companies.The paper verifies that what the top performers say they do in research surveys is actually what the outstanding corporate innovators do in practice.The paper then raises the question of how underperforming companies can implement key learnings from the best to improve their own innovation performance.The development of Thota framework for innovation as a systematic framework to help underperformers implement the best practices is discussed.As a case study,the implementation of the Thota framework for innovation is illustrated with BMW,an OCI award winning company.The Thota Framework for Innovation is based on three organizing principles and eight actions.Underperforming businesses can improve their innovation performance by internalizing the three organizing principles and rigorously implementing eight actions specified in the Thota framework for innovation.展开更多
Calcium sulfate(CaSO_(4))has been verified as a promising oxygen carrier(OC)in the chemical looping combustion(CLC)for its high oxygen capacity,abundant reserve and low cost,but its low reactivity and deleterious sulf...Calcium sulfate(CaSO_(4))has been verified as a promising oxygen carrier(OC)in the chemical looping combustion(CLC)for its high oxygen capacity,abundant reserve and low cost,but its low reactivity and deleterious sulfur species emission from the side reactions of CaSO_(4) should be well considered for its wide application in CLC.In order to promote the reactivity of CaSO_(4) and increase its potential to inhibit the gaseous sulfur emission,a CeO_(2)-enhanced CaSO_(4) OC mixed OC of core–shell structure was prepared using the combined template synthesis method.Reaction characteristics of the prepared CaSO_(4)-CeO_(2) mixed OC with a typical lignite was first conducted and systematically investigated,and an improved reactivity of the prepared CaSO_(4)-CeO_(2) mixed OC was demonstrated than its single component CaSO_(4) or CeO_(2) due to the fast transfer and exchange of oxygen from the CaSO_(4) substrate to coal via the doped CeO_(2).Furthermore,the solid products formed from the mixed CaSO_(4)-CeO_(2) OC with the selected coal were collected and analyzed.Especially,evolution and redistribution of the sulfur species of different forms were focused.At the latter reaction stage of YN reaction with the CaSO_(4)-CeO_(2) mixed OC,the SO_(2) emitted from the side reactions of CaSO_(4) was greatly diminished and the doped CeO_(2) was proven effective to directionally fix the SO_(2) released to turn into different solid sulfur compounds,which were determined as Ce_(2)O_(2)S,Ce_(2)S_(3) and Ce_(2)(SO_(4))_(3)·5H_(2)O and formed through the different pathways.In addition,good regeneration of the reduced CaSO_(4)-CeO_(2) mixed OC could be reached in spite of the unavoidable interaction between the included minerals in coal and the reduced mixed OC.Overall,the combined template method-made CaSO_(4)-CeO_(2) mixed OC reported herein was not only endowed with enhanced reactivity for coal conversion,but also owned the potential to directionally fix the gaseous sulfur emission,which is quite applicable as OC for simultaneous decarbonatization and desulfurization in the real CLC process.展开更多
In this trial, a topical formulation of a 1% liposome TH cream was compared to a conventional TH formulation. Permeation was evaluated through a synthetic membrane. The study provided information on the rate of diffus...In this trial, a topical formulation of a 1% liposome TH cream was compared to a conventional TH formulation. Permeation was evaluated through a synthetic membrane. The study provided information on the rate of diffusion and percentage of drug release and also compared the penetration dynamics in the layers of the stratum corneum of both formulations. Liposome TH cream was able to deliver the active ingredient to a larger number of SC layers, with a higher amount of drug, which is very promising for the treatment of superficial mycoses.展开更多
Surface modification may have important influences on the penetration behavior of nanoscale drug delivery system. In the present study, we mainly focused on whether cell targeting or cell penetration could affect pene...Surface modification may have important influences on the penetration behavior of nanoscale drug delivery system. In the present study, we mainly focused on whether cell targeting or cell penetration could affect penetration abilities of nanostructured lipid carriers（NLC）. Real--time penetration of folate--or cell penetrating peptide（CPP）-modified NLC was evaluated using a multicellular tumor spheroid（MTS） established by stacking culture method as an in vitro testing platform. The results suggested that CPP modification had a better penetration behavior both on penetration depth and intensity compared with folate-modified NLC at the early stage of penetration process.展开更多
In this paper we develop several new refinement relations of Z for multiple viewpoints oriented requirements method (MVORM). The original motivation is that we found the standard Z refinement relation is not adequate ...In this paper we develop several new refinement relations of Z for multiple viewpoints oriented requirements method (MVORM). The original motivation is that we found the standard Z refinement relation is not adequate or correct when considering specifications that have temporal relationships of operations. The concept of temporal state variables is introduced into Z. Then new implementation relations are defined and new refinement relations are deduced, mainly for temporal state variables to process temporal relationships of operations. We use state transition systems to abstract the temporal state transitions. A simple example is used to show the procedures of MVORM. Finally some directions of further work are forwarded.展开更多
This paper studies the radar cross section （RCS） of carrier electronic warfare airplanes. Under the typical naval operations section, the mathematical model of the radar wave＇s pitch angle incidence range analysis ...This paper studies the radar cross section （RCS） of carrier electronic warfare airplanes. Under the typical naval operations section, the mathematical model of the radar wave＇s pitch angle incidence range analysis is established. Based on the CATIA software, considering dynamic deflec- tions of duck wing leading edge flaps, flaperons, horizontal tail, and rudder, as well as aircraft with air-to-air missile, anti-radiation missile, electronic jamming pod, and other weapons, the 3D models of carrier electronic warfare airplanes Model A and Model B with weapons were established. Based on the physical optics method and the equivalent electromagnetic flow method, by the use of the RCSAnsys software, the characteristics of carrier electronic warfare airplanes＇ RCS under steady and dynamic flights were simulated under the UHF, X, and S radar bands. This paper researches the detection probability of aircraft by radars under the condition of electronic warfare, and com- pletes the mathematical statistical analysis of the simulation results. The results show that： The Model A of carrier electronic warfare airplane is better than Model B on stealth performance and on discover probability by radar detection effectively.展开更多
A single-chip DVB-C quadrature amplitude modulation（QAM） demodulator is proposed,which integrates a 3.3V 10bit 40MSPS analog-to-digital converter and a forward error correction decoder. The demodulator chip can supp...A single-chip DVB-C quadrature amplitude modulation（QAM） demodulator is proposed,which integrates a 3.3V 10bit 40MSPS analog-to-digital converter and a forward error correction decoder. The demodulator chip can support 4-256 QAM with variable bit rate up to 80Mbps. It features a wide carrier offset acquisition range,optimal demodulation algorithm,and small circuit area. The chip is implemented in SMIC 0.25μm 1P5M mixed-signal CMOS technology with a die size of 3.5mm×3. 5mm. The maximum power consumption is 447mW.展开更多
All-inorganic Cs_(3)Bi_(2)I_(9)(CBI)halide perovskites are sought to be candidate for photoelectrical materials because of their low toxicity and satisfactory stability.Unfortunately,the discrete molecular[Bi2I9]3−clu...All-inorganic Cs_(3)Bi_(2)I_(9)(CBI)halide perovskites are sought to be candidate for photoelectrical materials because of their low toxicity and satisfactory stability.Unfortunately,the discrete molecular[Bi2I9]3−clusters limit the charge-transport behaviors.Herein,the defect halide perovskite based on trivalent Bi^(3+)is expanded to Cs_(3)Bi_(2)I_(6)Br_(3)(CBIB).Centimeter-size CBIB single crystal(Φ15×70 mm^(3))was grown by the vertical Bridgeman method.The powder X-ray diffraction analysis shows that CBIB has structure with lattice parameters of a=b=8.223Å,c=10.024Å,α=β=90°andγ=120°.The density functional theory(DFT)calculations demonstrate that the charge density distribution was enhanced after the dimensional expansion.The enhancement of carrier transport ability of(00l)in-plane is characterized before and after dimensional improvement.The obtained CBIB(001)exhibited an electron mobility up to 40.03 cm^(2)V^(−1)s^(−1)by time-of-flight(TOF)technique,higher than 26.46 cm^(2)V^(−1)s^(−1)of CBI(001).Furthermore,the X-ray sensitivity increases from 707.81μC Gy^(−1)cm^(−2)for CBI(001)to 3194.59μC Gy−1 cm^(−2)for CBIB(001).This research will deepen our understanding of Bi-based perovskite materials and afford more promising strategies for lead-free perovskite optoelectronic devices modification.展开更多
文摘In this article, we consider a two-dimensional symmetric space-fractional diffusion equation in which the space fractional derivatives are defined in Riesz potential sense. The well-posed feature is guaranteed by energy inequality. To solve the diffusion equation, a fully discrete form is established by employing Crank-Nicolson technique in time and Galerkin finite element method in space. The stability and convergence are proved and the stiffness matrix is given analytically. Three numerical examples are given to confirm our theoretical analysis in which we find that even with the same initial condition, the classical and fractional diffusion equations perform differently but tend to be uniform diffusion at last.
基金Supported by the National Natural Science Foundation of China （50809019）.
文摘The stress combination method for the fatigue assessment of the hatch comer of a bulk carrier was investigated based on equivalent waves. The principles of the equivalent waves of ship structures were given, including the determination of the dominant load parameter, heading, frequency, and amplitude of the equivalent regular waves. The dominant load parameters of the hatch comer of a bulk carrier were identified by the structural stress response analysis, and then a series of equivalent regular waves were defined based on these parameters. A combination method of the structural stress ranges under the different equivalent waves was developed for the fatigue analysis. The combination factors were obtained by least square regression analysis with the stress ranges derived from spectral fatigue analysis as the target value. The proposed method was applied to the hatch comer of another bulk carrier as an example. This shows that the results from the equivalent wave approach agree well with those from the spectral fatigue analysis. The workload is reduced substantially. This method can be referenced in the fatigue assessment of the hatch comer of a bulk carrier.
文摘In this paper, simulation of InAs/GaAs quantum dot (QD) laser is performed based upon a set of eight rate equations for the carriers and photons in five energy states. Carrier dynamics in these lasers were under analysis and the rate equations are solved using 4th order Runge-Kutta method. We have shown that by increasing injected current to the active medium of laser, switching-on and stability time of the system would decrease and power peak and stationary power will be increased. Also, emission in any state will start when the lower state is saturated and remain steady. The results including P-I characteristic curve for the ground state (GS), first excited state (ES1), second excited state (ES2) and output power of the QD laser will be presented.
文摘A new acquisition and tracking method is proposed for signal processing under the new signal system structure of Beidou-3 navigation satellite system(BDS-3). By starting with the analysis of the characteristics and signal structure of the new signal, the local replica of the ranging code and the study of the characteristics of the ranging code are completed, which proves that the method in this paper can be used in the subsequent acquisition and tracking process. The fast Fourier transformation(FFT) search based on longer coherence time and the adaptive phase-frequency switching carrier tracking loop are proposed for signals in different modulation modes. The actual signal of Beidou-3 satellite is sampled by local experiment, and the acquisition and tracking of the Beidou-3 satellite multi-band signal is finally completed. The tracking results verify the feasibility of the proposed acquisition and tracking method.
基金supported by the National Natural Science Foundation of China(No.T2288101)the National Key Research and Development Project,China(No.2020YFC1512500)the Academic Excellence Foundation of Beijing University of Aeronautics and Astronautics(BUAA)。
文摘Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper proposes an Adaptive Terminal Sliding Combined Super TwistingControl(ATS-STC)method to address the issues of low precision,slow convergence,and poor dis-turbance rejection capability resulting from external disturbances,such as carrier air-wake and deckmotion.By introducing a nonlinear term into the sliding surface and employing an integralapproach,the proposed ATS-STC method can ensure finite-time convergence and mitigate the chat-tering problem.An adaptive law is also utilized to estimate the external disturbances,therebyenhancing the anti-disturbance performance.Then,the stability and convergence time analysis ofthe designed controller are conducted.Based on the proposed method,an Automatic Carrier Land-ing System(ACLS)is developed to perform the carrier landing control task.Furthermore,a multi-dimensional validation is carried out.For the numerical simulation test,the Terminal Sliding ModeControl(TSMC)method and Proportion Integration Differentiation(PID)method are introducedas comparison,the quantitative assessment results show that the tracking error of TSMC and PIDcan reach 1.5 times and 2 times that of the proposed method.Finally,the Hardware-in-the-Loop(HIL)test and real flight test are conducted.All the experimental results demonstrate that the pro-posed control method is more effective and precise.
基金supported by the Research and Development Plan Project of China State Railway Group Co.,Ltd.(Project No.P2023X029).
文摘Purpose–As an important part of the management of railway passenger transport,the rationality and effectiveness of the clearing method of railway passenger transport are directly related to the operating efficiency and service quality of railway passenger transport enterprises.This paper aims to comprehensively and deeply discuss the evolution and development process of China’s railway passenger transport clearing method,analyze its characteristics and influences in each stage,identify the main factors affecting its evolution and development and then put forward thoughts on improving the future development of the clearing method.Design/methodology/approach–Through a detailed review of the railway passenger transport clearing methods from the planned economy period to the reform and opening up period and into the new century,the basis,mode,subject and object of clearing in different development stages are systematically compared.Findings–It comprehensively reveals the evolution of the clearing method,sorted out the characteristics and changes of the clearing method at each stage and the adaptability to the development of railway passenger transport at that time.The characteristics of the development of clearing measures for railway passenger transport in different stages and their far-reaching influence on railway passenger transport business are deeply analyzed.Originality/value–This paper summarized the factors influencing the development of China’s railway passenger transportation clearing approach evolution,including the simplified rules of clearing,enhanced the market adaptability,establishing and perfecting the incentive mechanism,strengthening the construction of informatization,etc.This paper puts forward the ways to improve the railway passenger transportation clearing future development thinking.
文摘An efficient method to track the carrier frequency which is recommended to use in low earth orbit(LEO) direct-sequence spread-spectrum(DS/SS) communication system is given. The carrier frequency drifts quicker in LEO DS/SS communication system, its tracking problem becomes much more important especially in digital receiver with the limits of physical shape and power. Under the condition of coarse carrier frequency synchronization, a digital tracking method based on least square method(LSM) is proved to be a quick, simple and efficient method. Numerical results and charts are given.
基金supported by the Major National S&T Program(No.2011ZX06004-016-002)the Shenyang R&D Center for Advanced Materials,Institute of Metal Research,Chinese Academy of Sciences for support of this work
文摘The relationship between the vapor pressure of liquid copper and the flow rate of carrier gas argon was discussed, when the carrier gas method was used to determine the vapor pressure of liquid copper at 1892 K. The proper argon flow rate range obtained was 150-500 mL/min and enough evidence was provided to verify the vapor pressure-flow rate of carrier gas relationship at the target temperature. Based on the proper flow rate range, the vapor pressure of liquid copper was measured at 1609-1892 K. The relationship of vapor pressure-temperature obtained by the method of regression analysis can be expressed as： In（p/Pa） = （25.470 -I- 0.903） - （39099.8 -4- 1574.5）/T, Further, the thermodynamic properties including the heat of vaporization and the Gibbs free energy of the Cu （I） = Cu （g） reaction were calculated by the vapor pressiJre obtained over the temperature range covered.
基金supported by the National 863 Program under Grant No. 2007AA03Z415.
文摘A novel fiber Bragg grating （FBG） sensor array system based on digital phase generated carrier （PGC） demodulation and reference compensation method is proposed and set up. Experimental results confirm that the digital PGC demodulation can be used for wavelength-division-multiplexed FBG sensor array and the reference compensation method can reduce the environmental interference by approximately 40 dB in the frequency range from 20 Hz to 2 kHz. The minimum detectable wavelength-shift of the sensor system is 1 × 10^-3 pm/Hz^1/2.
文摘The Product Development and Management Association(PDMA)comparative performance assessment studies(CPAS)teach us that the new product development(NPD)and innovation management practices continue to evolve.However,advances in the practice of NPD and innovation did not yield significant increases in new product success rates.However,the PDMA 2003 CPAS reported a significant difference in the success rates for top performing businesses versus the"rest".This paper summarizes innovation practices of top performing businesses from CPAS and compares them with the practices of PDMA Outstanding Corporate Innovator(OCI)Award winning companies.The paper verifies that what the top performers say they do in research surveys is actually what the outstanding corporate innovators do in practice.The paper then raises the question of how underperforming companies can implement key learnings from the best to improve their own innovation performance.The development of Thota framework for innovation as a systematic framework to help underperformers implement the best practices is discussed.As a case study,the implementation of the Thota framework for innovation is illustrated with BMW,an OCI award winning company.The Thota Framework for Innovation is based on three organizing principles and eight actions.Underperforming businesses can improve their innovation performance by internalizing the three organizing principles and rigorously implementing eight actions specified in the Thota framework for innovation.
基金supported by the National Natural Science Founda-tion of China(Nos.51776073,51906083)Key Research&Develop-ment program of Henan Province(No.162102210233)+1 种基金North China University of Water Resources and Electric Power Innovative Project(Nos.2019XA014,2019XB058)Scientific Research&Development Project of Ji-Yan Energy Science and Technology Research Institute(NKY2020-05).
文摘Calcium sulfate(CaSO_(4))has been verified as a promising oxygen carrier(OC)in the chemical looping combustion(CLC)for its high oxygen capacity,abundant reserve and low cost,but its low reactivity and deleterious sulfur species emission from the side reactions of CaSO_(4) should be well considered for its wide application in CLC.In order to promote the reactivity of CaSO_(4) and increase its potential to inhibit the gaseous sulfur emission,a CeO_(2)-enhanced CaSO_(4) OC mixed OC of core–shell structure was prepared using the combined template synthesis method.Reaction characteristics of the prepared CaSO_(4)-CeO_(2) mixed OC with a typical lignite was first conducted and systematically investigated,and an improved reactivity of the prepared CaSO_(4)-CeO_(2) mixed OC was demonstrated than its single component CaSO_(4) or CeO_(2) due to the fast transfer and exchange of oxygen from the CaSO_(4) substrate to coal via the doped CeO_(2).Furthermore,the solid products formed from the mixed CaSO_(4)-CeO_(2) OC with the selected coal were collected and analyzed.Especially,evolution and redistribution of the sulfur species of different forms were focused.At the latter reaction stage of YN reaction with the CaSO_(4)-CeO_(2) mixed OC,the SO_(2) emitted from the side reactions of CaSO_(4) was greatly diminished and the doped CeO_(2) was proven effective to directionally fix the SO_(2) released to turn into different solid sulfur compounds,which were determined as Ce_(2)O_(2)S,Ce_(2)S_(3) and Ce_(2)(SO_(4))_(3)·5H_(2)O and formed through the different pathways.In addition,good regeneration of the reduced CaSO_(4)-CeO_(2) mixed OC could be reached in spite of the unavoidable interaction between the included minerals in coal and the reduced mixed OC.Overall,the combined template method-made CaSO_(4)-CeO_(2) mixed OC reported herein was not only endowed with enhanced reactivity for coal conversion,but also owned the potential to directionally fix the gaseous sulfur emission,which is quite applicable as OC for simultaneous decarbonatization and desulfurization in the real CLC process.
文摘In this trial, a topical formulation of a 1% liposome TH cream was compared to a conventional TH formulation. Permeation was evaluated through a synthetic membrane. The study provided information on the rate of diffusion and percentage of drug release and also compared the penetration dynamics in the layers of the stratum corneum of both formulations. Liposome TH cream was able to deliver the active ingredient to a larger number of SC layers, with a higher amount of drug, which is very promising for the treatment of superficial mycoses.
基金National key Basic Research Program(Grant No.2013CB932501)National Natural Science Foundation of China(Grant No.81273454 and 81473156)+1 种基金Beijing National Science Foundation(Grant No.7132113)Doctoral Foundation of the Ministry of Education(Grant No.20130001110055)
文摘Surface modification may have important influences on the penetration behavior of nanoscale drug delivery system. In the present study, we mainly focused on whether cell targeting or cell penetration could affect penetration abilities of nanostructured lipid carriers（NLC）. Real--time penetration of folate--or cell penetrating peptide（CPP）-modified NLC was evaluated using a multicellular tumor spheroid（MTS） established by stacking culture method as an in vitro testing platform. The results suggested that CPP modification had a better penetration behavior both on penetration depth and intensity compared with folate-modified NLC at the early stage of penetration process.
基金Supported by Natural Science Foundation of Hubei Province (98J0 75 ) Ziqiang Technical Innovation Foundation ofWuhan Universi
文摘In this paper we develop several new refinement relations of Z for multiple viewpoints oriented requirements method (MVORM). The original motivation is that we found the standard Z refinement relation is not adequate or correct when considering specifications that have temporal relationships of operations. The concept of temporal state variables is introduced into Z. Then new implementation relations are defined and new refinement relations are deduced, mainly for temporal state variables to process temporal relationships of operations. We use state transition systems to abstract the temporal state transitions. A simple example is used to show the procedures of MVORM. Finally some directions of further work are forwarded.
基金supported by the National Natural Science Foundation of China (No.51375490)
文摘This paper studies the radar cross section （RCS） of carrier electronic warfare airplanes. Under the typical naval operations section, the mathematical model of the radar wave＇s pitch angle incidence range analysis is established. Based on the CATIA software, considering dynamic deflec- tions of duck wing leading edge flaps, flaperons, horizontal tail, and rudder, as well as aircraft with air-to-air missile, anti-radiation missile, electronic jamming pod, and other weapons, the 3D models of carrier electronic warfare airplanes Model A and Model B with weapons were established. Based on the physical optics method and the equivalent electromagnetic flow method, by the use of the RCSAnsys software, the characteristics of carrier electronic warfare airplanes＇ RCS under steady and dynamic flights were simulated under the UHF, X, and S radar bands. This paper researches the detection probability of aircraft by radars under the condition of electronic warfare, and com- pletes the mathematical statistical analysis of the simulation results. The results show that： The Model A of carrier electronic warfare airplane is better than Model B on stealth performance and on discover probability by radar detection effectively.
文摘A single-chip DVB-C quadrature amplitude modulation（QAM） demodulator is proposed,which integrates a 3.3V 10bit 40MSPS analog-to-digital converter and a forward error correction decoder. The demodulator chip can support 4-256 QAM with variable bit rate up to 80Mbps. It features a wide carrier offset acquisition range,optimal demodulation algorithm,and small circuit area. The chip is implemented in SMIC 0.25μm 1P5M mixed-signal CMOS technology with a die size of 3.5mm×3. 5mm. The maximum power consumption is 447mW.
基金supported by the National Natural Science Foundations of China(Nos.51872228,U2032170 and 51802262)the National Key Research and Development Program of China(2016YFE0115200 and 2016YFF0101301)+2 种基金the Natural Science Foundations of Shaanxi Province(2019JQ-459 and 2020JC-12)the Natural Science Basic Research Plan in Shaanxi Province of China(2019ZDLGY04-07)the Fundamental Research Funds for the Central Universities(D5000210906 and 3102020QD0408)。
文摘All-inorganic Cs_(3)Bi_(2)I_(9)(CBI)halide perovskites are sought to be candidate for photoelectrical materials because of their low toxicity and satisfactory stability.Unfortunately,the discrete molecular[Bi2I9]3−clusters limit the charge-transport behaviors.Herein,the defect halide perovskite based on trivalent Bi^(3+)is expanded to Cs_(3)Bi_(2)I_(6)Br_(3)(CBIB).Centimeter-size CBIB single crystal(Φ15×70 mm^(3))was grown by the vertical Bridgeman method.The powder X-ray diffraction analysis shows that CBIB has structure with lattice parameters of a=b=8.223Å,c=10.024Å,α=β=90°andγ=120°.The density functional theory(DFT)calculations demonstrate that the charge density distribution was enhanced after the dimensional expansion.The enhancement of carrier transport ability of(00l)in-plane is characterized before and after dimensional improvement.The obtained CBIB(001)exhibited an electron mobility up to 40.03 cm^(2)V^(−1)s^(−1)by time-of-flight(TOF)technique,higher than 26.46 cm^(2)V^(−1)s^(−1)of CBI(001).Furthermore,the X-ray sensitivity increases from 707.81μC Gy^(−1)cm^(−2)for CBI(001)to 3194.59μC Gy−1 cm^(−2)for CBIB(001).This research will deepen our understanding of Bi-based perovskite materials and afford more promising strategies for lead-free perovskite optoelectronic devices modification.
