In order to study the calculation methods of shear behavior of reinforced concrete beams of Chinese modern reinforced concrete buildings,this paper carried out tests on the concrete compressive strength of 12 Chinese ...In order to study the calculation methods of shear behavior of reinforced concrete beams of Chinese modern reinforced concrete buildings,this paper carried out tests on the concrete compressive strength of 12 Chinese modern concrete buildings,the mechanical properties of 66 rebars from different Chinese modern concrete buildings,and the concrete cover thickness of 9 Chinese modern concrete buildings,and the actual material properties and structural configurations have been obtained. Then,the comparison on calculation methods include the Chinese original calculation method,the Chinese present calculation method,the American present calculation method and the European present calculation method is studied with case analysis method.The results show that the Chinese original calculation method of shear behavior of reinforced concrete beams is based on the allowable stress calculation method,and the design safety factors are 3. 55- 4. 00. The standard value of the compressive strength of concrete cubes is 8. 48 MPa,the standard value of the concrete tensile strength is 1.20 MPa,the standard value of the yield strength of rectangular rebars is 229. 56 MPa,and the standard value of the yield strength of round rebars is 276. 82 MPa. The average value of the concrete cover thickness of beams and columns is 35.96 mm. In term of calculation area of hoop rebars of reinforced concrete beams,without considering earthquake loads,the Chinese original structural calculation method is safer than the Chinese present structural calculation method,but is more unsafe than the American present structural calculation method and the European present structural calculation method. The results can provide the support for structural safety assessments and repair designs of Chinese modern reinforced concrete buildings.展开更多
This paper describes a new method of calculation of one-dimensional steady compressible gas flows in channels with possible heat and mass exchange through perforated sidewalls. The channel is divided into small elemen...This paper describes a new method of calculation of one-dimensional steady compressible gas flows in channels with possible heat and mass exchange through perforated sidewalls. The channel is divided into small elements of a finite size for which mass, energy and momentum conservation laws are written in the integral form, assuming linear distribution of the parameters along the length. As a result, the calculation is reduced to finding the roots of a quadratic algebraic equation, thus providing an alternative to numerical methods based on differential equations. The advantage of this method is its high tolerance to coarse discretization of the calculation area as well as its good applicability for transonic flow calculations.展开更多
Improving the computational efficiency of multi-physics simulation and constructing a real-time online simulation method is an important way to realise the virtual-real fusion of entities and data of power equipment w...Improving the computational efficiency of multi-physics simulation and constructing a real-time online simulation method is an important way to realise the virtual-real fusion of entities and data of power equipment with digital twin.In this paper,a datadriven fast calculation method for the temperature field of resin impregnated paper(RIP)bushing used in converter transformer valve-side is proposed,which combines the data dimensionality reduction technology and the surrogate model.After applying the finite element algorithm to obtain the temperature field distribution of RIP bushing under different operation conditions as the input dataset,the proper orthogonal decomposition(POD)algorithm is adopted to reduce the order and obtain the low-dimensional projection of the temperature data.On this basis,the surrogate model is used to construct the mapping relationship between the sensor monitoring data and the low-dimensional projection,so that it can achieve the fast calculation and reconstruction of temperature field distribution.The results show that this method can effectively and quickly calculate the overall temperature field distribution of the RIP bushing.The maximum relative error and the average relative error are less than 4.5%and 0.25%,respectively.The calculation speed is at the millisecond level,meeting the needs of digitalisation of power equipment.展开更多
In a power system, power generation and load have frequency response characteristics, which randomly fluctuate with changes in operating status. This study investigates a probabilistic power flow method that considers...In a power system, power generation and load have frequency response characteristics, which randomly fluctuate with changes in operating status. This study investigates a probabilistic power flow method that considers the unit and load uncertainty of the static frequency characteristic. Firstly, a calculation model is established on the basis of the characteristics of the frequency modulation performance of the unit and load. Then a calculation method is developed using the concept of dynamic power flow in order to determine the probability distribution of the active power flow of each line under the occurrence of a fault in the system. In the method, Monte Carlo sampling with the semi-invariant method is applied for analysis and calculation. The IEEE-30-buses system is taken as an example to analyze the impact of different responses of units on the power flow distribution of various branches. The method discussed herein is compared with the Monte Carlo simulation method to verify its effectiveness.展开更多
For a long time, because of the lack of investment capital and enough attentions, the overall constructions of rural power grid were far behind than the urban power grid in Chongqing Jiangbei Power Company. The low vo...For a long time, because of the lack of investment capital and enough attentions, the overall constructions of rural power grid were far behind than the urban power grid in Chongqing Jiangbei Power Company. The low voltage problems were highlighted in the rural power grid due to the characteristics of rural power grid. Using the distribution network flow calculation method, we evaluated the low voltage problems of the rural power grid which belongs to Chongqing Jiangbei Power Company. In addition, we collected the data of distribution transformers in electricity consumption peak period. Some practical management strategies were proposed by the analysis and evaluation of potential and appeared low voltage problems.展开更多
Aimed at the demand of contingency return at any time during the near-moon phase in the manned lunar landing missions,a fast calculation method for three-impulse contingency return trajectories is proposed.Firstly,a t...Aimed at the demand of contingency return at any time during the near-moon phase in the manned lunar landing missions,a fast calculation method for three-impulse contingency return trajectories is proposed.Firstly,a three-impulse contingency return trajectory scheme is presented by combining the Lambert transfer and maneuver at the special point.Secondly,a calculation model of three-impulse contingency return trajectories is established.Then,fast calculation methods are proposed by adopting the high-order Taylor expansion of differential algebra in the twobody trajectory dynamics model and perturbed trajectory dynamics model.Finally,the performance of the proposed methods is verified by numerical simulation.The results indicate that the fast calculation method of two-body trajectory has higher calculation efficiency compared to the semi-analytical calculation method under a certain accuracy condition.Due to its high efficiency,the characteristics of the three-impulse contingency return trajectories under different contingency scenarios are further analyzed expeditiously.These findings can be used for the design of contingency return trajectories in future manned lunar landing missions.展开更多
Lunar Laser Ranging has extremely high requirements for the pointing accuracy of the telescopes used.To improve its pointing accuracy and solve the problem of insufficiently accurate telescope pointing correction achi...Lunar Laser Ranging has extremely high requirements for the pointing accuracy of the telescopes used.To improve its pointing accuracy and solve the problem of insufficiently accurate telescope pointing correction achieved by tracking stars in the all-sky region,we propose a processing scheme to select larger-sized lunar craters near the Lunar Corner Cube Retroreflector as reference features for telescope pointing bias computation.Accurately determining the position of the craters in the images is crucial for calculating the pointing bias;therefore,we propose a method for accurately calculating the crater position based on lunar surface feature matching.This method uses matched feature points obtained from image feature matching,using a deep learning method to solve the image transformation matrix.The known position of a crater in a reference image is mapped using this matrix to calculate the crater position in the target image.We validate this method using craters near the Lunar Corner Cube Retroreflectors of Apollo 15 and Luna 17 and find that the calculated position of a crater on the target image falls on the center of the crater,even for image features with large distortion near the lunar limb.The maximum image matching error is approximately 1″,and the minimum is only 0.47″,which meets the pointing requirements of Lunar Laser Ranging.This method provides a new technical means for the high-precision pointing bias calculation of the Lunar Laser Ranging system.展开更多
A method-mix for intercultural user interface design (IUID) is explained and exemplified by application examples based on a hybrid approach covering cultural contexts in human-computer interaction (HCI) design using a...A method-mix for intercultural user interface design (IUID) is explained and exemplified by application examples based on a hybrid approach covering cultural contexts in human-computer interaction (HCI) design using a model of culturally influenced HCI. Cultural influence on HCI is described using cultural variables for user interface design. Assumptions and empirical results regarding the influence of culture on HCI, considering the path of the information processing and the interaction style between Chinese and German users are explained based on cultural models. Subsequent indicators represent the relationship between culture and HCI (culturally imprinted by the user). Correlations adopted theoretically between cultural dimensions and variables for HCI design were investigated. These correlations represent relevant constituents of a model for culturally influenced HCI. Considerations applying this model and evidence for the proper application of the IUID method-mix are presented elucidating why and how cultural aspects play a role in HCI design and usability/UX engineering. The IUID method-mix serves to inspire HCI engineers in the requirement analysis phase as well as HCI designers in the design phase. The readers are thereby sensitized to the challenges of intercultural usability/UX engineering and intercultural HCI design and will be equipped with methodological knowledge relevant to the derivation of design recommendations for user interface design for and in their desired cultural contexts. Finally, implications for practitioners are shown, including HCI style scores and practical design recommendations, to prognosticate the effort and the expenditures for considering the cultural context in IUID.展开更多
AIM: To compare the prediction error between Barrett Toric calculator and the new online AcrySof Toric calculator which incorporated Barrett astigmatism algorithm in Chinese cataract eyes with normal axial length and ...AIM: To compare the prediction error between Barrett Toric calculator and the new online AcrySof Toric calculator which incorporated Barrett astigmatism algorithm in Chinese cataract eyes with normal axial length and anterior chamber depth(ACD). METHODS: Prospective case-control study. All the cases had axial length(21-26 mm) with ACD no less than 2.4 mm.Keratometric values were measured by LenSTAR 900. The Barrett Toric calculator was used in group 1. In group 2, SRK-T formula was used to determine the spherical power of the Toric lens, and subsequent calculation of the cylinder type was performed using the new online Alcon Toric calculator. At 1 and 3 mo after surgery, a comprehensive subjective optometry was performed. The predicted residual astigmatism calculated by the two calculators was compared with that obtained by postoperative refraction,and the difference was defined as the astigmatism correction error [error of refractive astigmatism(ERA)].The error magnitude(EM) refers to the algebraic deviation of ERA, and the error vector(EV) indicates the vector deviation of ERA. The influence of the two calculation methods on the correction accuracy of toric IOL was quantitatively analyzed. RESULTS: The |EM| obtained at 1 mo after surgery were0.21±0.12 D, 0.22±0.18 D in group 1 and group 2 respectively,and correspondingly turned to be 0.19±0.13 D, 0.20±0.19 D at3 mo after surgery, with no statistical difference(P=0.633,P=0.877). The vector analysis showed that |EV| values in two groups at 1 mo after surgery were 0.29±0.14@105(D@angle) and 0.35±0.20@113(D@angle), respectively,whereas |EV| values 3 mo after surgery were 0.27±0.16@86(D@angle) and 0.32±0.23@102(D@angle), respectively. The differences between the groups were not statistically significant(P=0.119, P=0.261). CONCLUSION: The clinical effect of Barrett Toric calculator has a much more accurate tendency than that of new online AcrySof Toric calculator, but is not evident in cases with normal axial length and normal anterior posterior ratio.展开更多
We theoretically investigate the excited state intramolecular proton transfer(ESIPT) behavior of the novel fluorophore bis-imine derivative molecule HNP which was designed based on the intersection of 1-(hydrazonometh...We theoretically investigate the excited state intramolecular proton transfer(ESIPT) behavior of the novel fluorophore bis-imine derivative molecule HNP which was designed based on the intersection of 1-(hydrazonomethyl)-naphthalene-2-ol and 1-pyrenecarboxaldehyde. Especially, the density functional theory(DFT) and time-dependent density functional theory(TDDFT) methods for HNP monomer are introduced. Moreover, the "our own n-layered integrated molecular orbital and molecular mechanics"(ONIOM) method(TDDFT:universal force field(UFF)) is used to reveal the aggregation-induced emission(AIE) effect on the ESIPT process for HNP in crystal. Our results confirm that the ESIPT process happens upon the photoexcitation for the HNP monomer and HNP in crystal, which is distinctly monitored by the optimized geometric structures and the potential energy curves. In addition, the results of potential energy curves reveal that the ESIPT process in HNP will be promoted by the AIE effect. Furthermore, the highest occupied molecular orbital(HOMO) and lowest unoccupied molecular orbital(LUMO) for the HNP monomer and HNP in crystal have been calculated. The calculation demonstrates that the electron density decrease of proton donor caused by excitation promotes the ESIPT process. In addition, we find that the variation of atomic dipole moment corrected Hirshfeld population(ADCH) charge for proton acceptor induced by the AIE effect facilitates the ESIPT process. The results will be expected to deepen the understanding of ESIPT dynamics for luminophore under the AIE effect and provide insight into future design of high-efficient AIE compounds.展开更多
By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture defor...By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture deformation on well shut-in afterflow,this study couples the shut-in temperature field model,fracture deformation model,and gas flow model to establish a wellbore pressure calculation model incorporating thermo-hydro-mechanical coupling effects.The research analyzes the governing patterns of geothermal gradient,bottomhole pressure difference,drilling fluid pit gain,and kick index on casing head pressure,and establishes a shut-in pressure determination chart for HPHT wells based on coupled model calculation results.The study results show:geothermal gradient,bottomhole pressure difference,and drilling fluid pit gain exhibit positive correlations with casing head pressure;higher kick indices accelerate pressure rising rates while maintaining a constant maximum casing pressure;validation against field case data demonstrates over 95%accuracy in predicting wellbore pressure recovery after shut-in,with the pressure determination chart achieving 97.2%accuracy in target casing head pressure prediction and 98.3%accuracy in target shut-in time.This method enables accurate acquisition of formation pressure after HPHT well shut-in,providing reliable technical support for subsequent well control measures and ensuring safe and efficient development of deepwater and deep hydrocarbon reservoirs.展开更多
An analytic electromagnetic calculation method for doubly fed induction generator(DFIG) in wind turbine system was presented. Based on the operation principles, steady state equivalent circuit and basic equations of D...An analytic electromagnetic calculation method for doubly fed induction generator(DFIG) in wind turbine system was presented. Based on the operation principles, steady state equivalent circuit and basic equations of DFIG, the modeling for electromagnetic calculation of DFIG was proposed. The electromagnetic calculation of DFIG was divided into three steps: the magnetic flux calculation, parameters derivation and performance checks. For each step, the detailed numeric calculation formulas were all derived. Combining the calculation formulas, the whole electromagnetic calculation procedure was established, which consisted of three iterative calculation loops, including magnetic saturation coefficient, electromotive force and total output power. All of the electromagnetic and performance data of DIFG can be calculated conveniently by the established calculation procedure, which can be used to evaluate the new designed machine. A 1.5 MW DFIG designed by the proposed procedure was built, for which the whole type tests including no-load test, load test and temperature rising test were carried out. The test results have shown that the DFIG satisfies technical requirements and the test data fit well with the calculation results which prove the correctness of the presented calculation method.展开更多
Injection pressure is one of the key parameters used in the design of shale gas reservoir stimulation.Higher injection pressure helps to initiate fractures,inject fracturing fluid and proppant smoothly and maximize th...Injection pressure is one of the key parameters used in the design of shale gas reservoir stimulation.Higher injection pressure helps to initiate fractures,inject fracturing fluid and proppant smoothly and maximize the stimulated reservoir volume as soon as possible.If the injection pressure is too high,however,the risk of casing deformation is increased significantly.In this paper,the numerical calculation format of the injection pressure safety window while ensuring casing integrity(i.e.,the maximum safety injection pressure)was proposed based on an example of an actual engineering project.Then,it was verified based on the actual situation of one shale gas well in Weiyuan.The numerical calculation format is as follows.First,a 3D finite element model of initial fine geostress field is established in the scale of block.Second,a primary submodel for introducing the asymmetric characteristics of reservoir stiffness to simulate the asymmetry of fracture distribution.Third,a secondary submodel containing the attributes of casing,cement sheath and reservoir material properties.Fourth,submodels are used to calculate the casing deformation generated by different injection loads and estimate the maximum allowable fracturing injection pressure(pj)while the safety requirement of casing deformation is satisfied.The calculation result of the case well shows that when the cementing quality is poor and fractures are distributed asymmetrically,the lateral and vertical displacements at the maximum displacement point of the casing under the injection pressure of 80 MPa are obviously lower than those under 90 MPa.According to the yield limit criterion of P-110 casing steel,the casing deformation in this case is elastic strain,so the injection pressure of 80 MPa is safe.In conclusion,this method has rational precision and accuracy,for its numerical result is consistent with the actual engineering phenomenon.展开更多
The energy loss of the power grid is one of the key factors affecting the economic operation of power systems. How to calculate the electric energy consumption accurately will have a great influence on the planning, o...The energy loss of the power grid is one of the key factors affecting the economic operation of power systems. How to calculate the electric energy consumption accurately will have a great influence on the planning, operation and management of the power grid. Currently there is a mountain of theoretical methods to calculate the line loss of the power system. However, these methods have some limitation, such as less considering the volatility of wind power resources. This paper presents an improved method to calculate the energy loss of wind power generation, considering the fluctuations of wind power generation. First, data are collected to obtain the curve of the typical daily expected output of wind farms for one month. Second, the curve of the typical daily expected output are corrected by the average electricity and the shape factor to obtain the curve of the typical daily equivalent output of wind farms for one month. Finally, the power flow is calculated by using typical daily equivalent output curve to describe the energy loss for one month. The results in the 110 kV main network show that the method is feasible.展开更多
Up to now, the primary method for studying critical porosity and porous media are experimental measurements and data analysis. There are few references on how to numerically calculate porosity at the critical point, p...Up to now, the primary method for studying critical porosity and porous media are experimental measurements and data analysis. There are few references on how to numerically calculate porosity at the critical point, pore fluid-related parameters, or framework-related parameters. So in this article, we provide a method for calculating these elastic parameters and use this method to analyze gas-bearing samples. We first derive three linear equations for numerical calculations. They are the equation of density p versus porosity Ф, density times the square of compressional wave velocity p Vp^2 versus porosity, and density times the square of shear wave velocity pVs^2 versus porosity. Here porosity is viewed as an independent variable and the other parameters are dependent variables. We elaborate on the calculation steps and provide some notes. Then we use our method to analyze gas-bearing sandstone samples. In the calculations, density and P- and S-velocities are input data and we calculate eleven relative parameters for porous fluid, framework, and critical point. In the end, by comparing our results with experiment measurements, we prove the viability of the method.展开更多
The origin and substance of the tlywheel moment calculation method of inertia mo ment of crane mechanism are set forth comprehensively and systematically in this paper, that is, the nucleus or the focus ofmoment of in...The origin and substance of the tlywheel moment calculation method of inertia mo ment of crane mechanism are set forth comprehensively and systematically in this paper, that is, the nucleus or the focus ofmoment of inertia calculation is the problem of calculating convertible tlywheelmoment. It is much better for the calculation of flywheel moment of loading move mass of lifting, traveling and rotating mechanism using the low of conservation of energy, the theorem of kinetic energyfor that of radius - changing mechanism, and the law of conservation of energy for that of all parts of gearing mechanism.展开更多
Various methods are available for calculating the TOC of shale reservoirs with logging data, and each method has its unique applicability andaccuracy. So it is especially important to establish a regional experimental...Various methods are available for calculating the TOC of shale reservoirs with logging data, and each method has its unique applicability andaccuracy. So it is especially important to establish a regional experimental calculation model based on a thorough analysis of their applicability.With the Upper Ordovician Wufeng Fm-Lower Silurian Longmaxi Fm shale reservoirs as an example, TOC calculation models were built by useof the improved DlgR, bulk density, natural gamma spectroscopy, multi-fitting and volume model methods respectively, considering the previousresearch results and the geologic features of the area. These models were compared based on the core data. Finally, the bulk density method wasselected as the regional experimental calculation model. Field practices demonstrated that the improved DlgR and natural gamma spectroscopymethods are poor in accuracy;although the multi-fitting method and bulk density method have relatively high accuracy, the bulk density methodis simpler and wider in application. For further verifying its applicability, the bulk density method was applied to calculate the TOC of shalereservoirs in several key wells in the Jiaoshiba shale gas field, Sichuan Basin, and the calculation accuracy was clarified with the measured dataof core samples, showing that the coincidence rate of logging-based TOC calculation is up to 90.5%-91.0%.展开更多
The structure-activity relationship of functional materials is an everlasting and desirable research question for material science researchers,where characterization and calculation tools are the keys to deciphering t...The structure-activity relationship of functional materials is an everlasting and desirable research question for material science researchers,where characterization and calculation tools are the keys to deciphering this intricate relationship.Here,we choose rechargeable battery materials as an example and introduce the most representative advanced characterization and calculation methods in four different scales:real space,energy,momentum space,and time.Current research methods to study battery material structure,energy level transition,dispersion relations of phonons and electrons,and time-resolved evolution are reviewed.From different views,various expression forms of structure and electronic structure are presented to understand the reaction processes and electrochemical mechanisms comprehensively in battery systems.According to the summary of the present battery research,the challenges and perspectives of advanced characterization and calculation techniques for the field of rechargeable batteries are further discussed.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.51138002)a Foundation for the Author of National Excellent Doctoral Dissertation of PR China(Grant No.201452)
文摘In order to study the calculation methods of shear behavior of reinforced concrete beams of Chinese modern reinforced concrete buildings,this paper carried out tests on the concrete compressive strength of 12 Chinese modern concrete buildings,the mechanical properties of 66 rebars from different Chinese modern concrete buildings,and the concrete cover thickness of 9 Chinese modern concrete buildings,and the actual material properties and structural configurations have been obtained. Then,the comparison on calculation methods include the Chinese original calculation method,the Chinese present calculation method,the American present calculation method and the European present calculation method is studied with case analysis method.The results show that the Chinese original calculation method of shear behavior of reinforced concrete beams is based on the allowable stress calculation method,and the design safety factors are 3. 55- 4. 00. The standard value of the compressive strength of concrete cubes is 8. 48 MPa,the standard value of the concrete tensile strength is 1.20 MPa,the standard value of the yield strength of rectangular rebars is 229. 56 MPa,and the standard value of the yield strength of round rebars is 276. 82 MPa. The average value of the concrete cover thickness of beams and columns is 35.96 mm. In term of calculation area of hoop rebars of reinforced concrete beams,without considering earthquake loads,the Chinese original structural calculation method is safer than the Chinese present structural calculation method,but is more unsafe than the American present structural calculation method and the European present structural calculation method. The results can provide the support for structural safety assessments and repair designs of Chinese modern reinforced concrete buildings.
文摘This paper describes a new method of calculation of one-dimensional steady compressible gas flows in channels with possible heat and mass exchange through perforated sidewalls. The channel is divided into small elements of a finite size for which mass, energy and momentum conservation laws are written in the integral form, assuming linear distribution of the parameters along the length. As a result, the calculation is reduced to finding the roots of a quadratic algebraic equation, thus providing an alternative to numerical methods based on differential equations. The advantage of this method is its high tolerance to coarse discretization of the calculation area as well as its good applicability for transonic flow calculations.
基金supported by China Postdoctoral Science Foundation,Grant 2024M753544Science and Technology Project of CSG,Grant GDKJXM2022106.
文摘Improving the computational efficiency of multi-physics simulation and constructing a real-time online simulation method is an important way to realise the virtual-real fusion of entities and data of power equipment with digital twin.In this paper,a datadriven fast calculation method for the temperature field of resin impregnated paper(RIP)bushing used in converter transformer valve-side is proposed,which combines the data dimensionality reduction technology and the surrogate model.After applying the finite element algorithm to obtain the temperature field distribution of RIP bushing under different operation conditions as the input dataset,the proper orthogonal decomposition(POD)algorithm is adopted to reduce the order and obtain the low-dimensional projection of the temperature data.On this basis,the surrogate model is used to construct the mapping relationship between the sensor monitoring data and the low-dimensional projection,so that it can achieve the fast calculation and reconstruction of temperature field distribution.The results show that this method can effectively and quickly calculate the overall temperature field distribution of the RIP bushing.The maximum relative error and the average relative error are less than 4.5%and 0.25%,respectively.The calculation speed is at the millisecond level,meeting the needs of digitalisation of power equipment.
基金Supported by the State Grid Scientific and Technological Project (Title: Research on Control Strategy with Fast Demand Response to Severe Power Shortage, SGJS0000DKJS1700263)
文摘In a power system, power generation and load have frequency response characteristics, which randomly fluctuate with changes in operating status. This study investigates a probabilistic power flow method that considers the unit and load uncertainty of the static frequency characteristic. Firstly, a calculation model is established on the basis of the characteristics of the frequency modulation performance of the unit and load. Then a calculation method is developed using the concept of dynamic power flow in order to determine the probability distribution of the active power flow of each line under the occurrence of a fault in the system. In the method, Monte Carlo sampling with the semi-invariant method is applied for analysis and calculation. The IEEE-30-buses system is taken as an example to analyze the impact of different responses of units on the power flow distribution of various branches. The method discussed herein is compared with the Monte Carlo simulation method to verify its effectiveness.
文摘For a long time, because of the lack of investment capital and enough attentions, the overall constructions of rural power grid were far behind than the urban power grid in Chongqing Jiangbei Power Company. The low voltage problems were highlighted in the rural power grid due to the characteristics of rural power grid. Using the distribution network flow calculation method, we evaluated the low voltage problems of the rural power grid which belongs to Chongqing Jiangbei Power Company. In addition, we collected the data of distribution transformers in electricity consumption peak period. Some practical management strategies were proposed by the analysis and evaluation of potential and appeared low voltage problems.
基金co-supported by the National Natural Science Foundation of China(No.12072365)the Technology Innovation Team of Manned Space Engineering,China。
文摘Aimed at the demand of contingency return at any time during the near-moon phase in the manned lunar landing missions,a fast calculation method for three-impulse contingency return trajectories is proposed.Firstly,a three-impulse contingency return trajectory scheme is presented by combining the Lambert transfer and maneuver at the special point.Secondly,a calculation model of three-impulse contingency return trajectories is established.Then,fast calculation methods are proposed by adopting the high-order Taylor expansion of differential algebra in the twobody trajectory dynamics model and perturbed trajectory dynamics model.Finally,the performance of the proposed methods is verified by numerical simulation.The results indicate that the fast calculation method of two-body trajectory has higher calculation efficiency compared to the semi-analytical calculation method under a certain accuracy condition.Due to its high efficiency,the characteristics of the three-impulse contingency return trajectories under different contingency scenarios are further analyzed expeditiously.These findings can be used for the design of contingency return trajectories in future manned lunar landing missions.
基金funded by Natural Science Foundation of Jilin Province(20220101125JC)the National Natural Science Foundation of China(12273079).
文摘Lunar Laser Ranging has extremely high requirements for the pointing accuracy of the telescopes used.To improve its pointing accuracy and solve the problem of insufficiently accurate telescope pointing correction achieved by tracking stars in the all-sky region,we propose a processing scheme to select larger-sized lunar craters near the Lunar Corner Cube Retroreflector as reference features for telescope pointing bias computation.Accurately determining the position of the craters in the images is crucial for calculating the pointing bias;therefore,we propose a method for accurately calculating the crater position based on lunar surface feature matching.This method uses matched feature points obtained from image feature matching,using a deep learning method to solve the image transformation matrix.The known position of a crater in a reference image is mapped using this matrix to calculate the crater position in the target image.We validate this method using craters near the Lunar Corner Cube Retroreflectors of Apollo 15 and Luna 17 and find that the calculated position of a crater on the target image falls on the center of the crater,even for image features with large distortion near the lunar limb.The maximum image matching error is approximately 1″,and the minimum is only 0.47″,which meets the pointing requirements of Lunar Laser Ranging.This method provides a new technical means for the high-precision pointing bias calculation of the Lunar Laser Ranging system.
文摘A method-mix for intercultural user interface design (IUID) is explained and exemplified by application examples based on a hybrid approach covering cultural contexts in human-computer interaction (HCI) design using a model of culturally influenced HCI. Cultural influence on HCI is described using cultural variables for user interface design. Assumptions and empirical results regarding the influence of culture on HCI, considering the path of the information processing and the interaction style between Chinese and German users are explained based on cultural models. Subsequent indicators represent the relationship between culture and HCI (culturally imprinted by the user). Correlations adopted theoretically between cultural dimensions and variables for HCI design were investigated. These correlations represent relevant constituents of a model for culturally influenced HCI. Considerations applying this model and evidence for the proper application of the IUID method-mix are presented elucidating why and how cultural aspects play a role in HCI design and usability/UX engineering. The IUID method-mix serves to inspire HCI engineers in the requirement analysis phase as well as HCI designers in the design phase. The readers are thereby sensitized to the challenges of intercultural usability/UX engineering and intercultural HCI design and will be equipped with methodological knowledge relevant to the derivation of design recommendations for user interface design for and in their desired cultural contexts. Finally, implications for practitioners are shown, including HCI style scores and practical design recommendations, to prognosticate the effort and the expenditures for considering the cultural context in IUID.
基金Supported by Natural Science Foundation of Tianjin Medical University (No.2016KYZM14)
文摘AIM: To compare the prediction error between Barrett Toric calculator and the new online AcrySof Toric calculator which incorporated Barrett astigmatism algorithm in Chinese cataract eyes with normal axial length and anterior chamber depth(ACD). METHODS: Prospective case-control study. All the cases had axial length(21-26 mm) with ACD no less than 2.4 mm.Keratometric values were measured by LenSTAR 900. The Barrett Toric calculator was used in group 1. In group 2, SRK-T formula was used to determine the spherical power of the Toric lens, and subsequent calculation of the cylinder type was performed using the new online Alcon Toric calculator. At 1 and 3 mo after surgery, a comprehensive subjective optometry was performed. The predicted residual astigmatism calculated by the two calculators was compared with that obtained by postoperative refraction,and the difference was defined as the astigmatism correction error [error of refractive astigmatism(ERA)].The error magnitude(EM) refers to the algebraic deviation of ERA, and the error vector(EV) indicates the vector deviation of ERA. The influence of the two calculation methods on the correction accuracy of toric IOL was quantitatively analyzed. RESULTS: The |EM| obtained at 1 mo after surgery were0.21±0.12 D, 0.22±0.18 D in group 1 and group 2 respectively,and correspondingly turned to be 0.19±0.13 D, 0.20±0.19 D at3 mo after surgery, with no statistical difference(P=0.633,P=0.877). The vector analysis showed that |EV| values in two groups at 1 mo after surgery were 0.29±0.14@105(D@angle) and 0.35±0.20@113(D@angle), respectively,whereas |EV| values 3 mo after surgery were 0.27±0.16@86(D@angle) and 0.32±0.23@102(D@angle), respectively. The differences between the groups were not statistically significant(P=0.119, P=0.261). CONCLUSION: The clinical effect of Barrett Toric calculator has a much more accurate tendency than that of new online AcrySof Toric calculator, but is not evident in cases with normal axial length and normal anterior posterior ratio.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11574115 and 11704146)
文摘We theoretically investigate the excited state intramolecular proton transfer(ESIPT) behavior of the novel fluorophore bis-imine derivative molecule HNP which was designed based on the intersection of 1-(hydrazonomethyl)-naphthalene-2-ol and 1-pyrenecarboxaldehyde. Especially, the density functional theory(DFT) and time-dependent density functional theory(TDDFT) methods for HNP monomer are introduced. Moreover, the "our own n-layered integrated molecular orbital and molecular mechanics"(ONIOM) method(TDDFT:universal force field(UFF)) is used to reveal the aggregation-induced emission(AIE) effect on the ESIPT process for HNP in crystal. Our results confirm that the ESIPT process happens upon the photoexcitation for the HNP monomer and HNP in crystal, which is distinctly monitored by the optimized geometric structures and the potential energy curves. In addition, the results of potential energy curves reveal that the ESIPT process in HNP will be promoted by the AIE effect. Furthermore, the highest occupied molecular orbital(HOMO) and lowest unoccupied molecular orbital(LUMO) for the HNP monomer and HNP in crystal have been calculated. The calculation demonstrates that the electron density decrease of proton donor caused by excitation promotes the ESIPT process. In addition, we find that the variation of atomic dipole moment corrected Hirshfeld population(ADCH) charge for proton acceptor induced by the AIE effect facilitates the ESIPT process. The results will be expected to deepen the understanding of ESIPT dynamics for luminophore under the AIE effect and provide insight into future design of high-efficient AIE compounds.
基金Supported by the Joint Fund Key Program of the National Natural Science Foundation of China(U21B2069)Key Research and Development Program of Shandong Province(2022CXGC020407)Basic Science Center Program of the National Natural Science Foundation of China(52288101)。
文摘By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture deformation on well shut-in afterflow,this study couples the shut-in temperature field model,fracture deformation model,and gas flow model to establish a wellbore pressure calculation model incorporating thermo-hydro-mechanical coupling effects.The research analyzes the governing patterns of geothermal gradient,bottomhole pressure difference,drilling fluid pit gain,and kick index on casing head pressure,and establishes a shut-in pressure determination chart for HPHT wells based on coupled model calculation results.The study results show:geothermal gradient,bottomhole pressure difference,and drilling fluid pit gain exhibit positive correlations with casing head pressure;higher kick indices accelerate pressure rising rates while maintaining a constant maximum casing pressure;validation against field case data demonstrates over 95%accuracy in predicting wellbore pressure recovery after shut-in,with the pressure determination chart achieving 97.2%accuracy in target casing head pressure prediction and 98.3%accuracy in target shut-in time.This method enables accurate acquisition of formation pressure after HPHT well shut-in,providing reliable technical support for subsequent well control measures and ensuring safe and efficient development of deepwater and deep hydrocarbon reservoirs.
基金Project(2011DFA62240) supported by the International Scientific and Technological Cooperation Projects,ChinaProject(019945-SES6) supported by the European Union(EU)6th Framework Program UP-WIND Project,Denmark
文摘An analytic electromagnetic calculation method for doubly fed induction generator(DFIG) in wind turbine system was presented. Based on the operation principles, steady state equivalent circuit and basic equations of DFIG, the modeling for electromagnetic calculation of DFIG was proposed. The electromagnetic calculation of DFIG was divided into three steps: the magnetic flux calculation, parameters derivation and performance checks. For each step, the detailed numeric calculation formulas were all derived. Combining the calculation formulas, the whole electromagnetic calculation procedure was established, which consisted of three iterative calculation loops, including magnetic saturation coefficient, electromotive force and total output power. All of the electromagnetic and performance data of DIFG can be calculated conveniently by the established calculation procedure, which can be used to evaluate the new designed machine. A 1.5 MW DFIG designed by the proposed procedure was built, for which the whole type tests including no-load test, load test and temperature rising test were carried out. The test results have shown that the DFIG satisfies technical requirements and the test data fit well with the calculation results which prove the correctness of the presented calculation method.
基金supported by the General Program of National Natural Science Foundation of China“Theoretical and Experimental Study on Key Mechanical Problems in Unconventional Natural Gas Exploitation”(No.:11272216).
文摘Injection pressure is one of the key parameters used in the design of shale gas reservoir stimulation.Higher injection pressure helps to initiate fractures,inject fracturing fluid and proppant smoothly and maximize the stimulated reservoir volume as soon as possible.If the injection pressure is too high,however,the risk of casing deformation is increased significantly.In this paper,the numerical calculation format of the injection pressure safety window while ensuring casing integrity(i.e.,the maximum safety injection pressure)was proposed based on an example of an actual engineering project.Then,it was verified based on the actual situation of one shale gas well in Weiyuan.The numerical calculation format is as follows.First,a 3D finite element model of initial fine geostress field is established in the scale of block.Second,a primary submodel for introducing the asymmetric characteristics of reservoir stiffness to simulate the asymmetry of fracture distribution.Third,a secondary submodel containing the attributes of casing,cement sheath and reservoir material properties.Fourth,submodels are used to calculate the casing deformation generated by different injection loads and estimate the maximum allowable fracturing injection pressure(pj)while the safety requirement of casing deformation is satisfied.The calculation result of the case well shows that when the cementing quality is poor and fractures are distributed asymmetrically,the lateral and vertical displacements at the maximum displacement point of the casing under the injection pressure of 80 MPa are obviously lower than those under 90 MPa.According to the yield limit criterion of P-110 casing steel,the casing deformation in this case is elastic strain,so the injection pressure of 80 MPa is safe.In conclusion,this method has rational precision and accuracy,for its numerical result is consistent with the actual engineering phenomenon.
文摘The energy loss of the power grid is one of the key factors affecting the economic operation of power systems. How to calculate the electric energy consumption accurately will have a great influence on the planning, operation and management of the power grid. Currently there is a mountain of theoretical methods to calculate the line loss of the power system. However, these methods have some limitation, such as less considering the volatility of wind power resources. This paper presents an improved method to calculate the energy loss of wind power generation, considering the fluctuations of wind power generation. First, data are collected to obtain the curve of the typical daily expected output of wind farms for one month. Second, the curve of the typical daily expected output are corrected by the average electricity and the shape factor to obtain the curve of the typical daily equivalent output of wind farms for one month. Finally, the power flow is calculated by using typical daily equivalent output curve to describe the energy loss for one month. The results in the 110 kV main network show that the method is feasible.
基金supported by the National Natural Science Foundation of China (Grant No.40874052)the Key Laboratory of Geo-detection (China University of Geosciences,Beijing),Ministry of Education
文摘Up to now, the primary method for studying critical porosity and porous media are experimental measurements and data analysis. There are few references on how to numerically calculate porosity at the critical point, pore fluid-related parameters, or framework-related parameters. So in this article, we provide a method for calculating these elastic parameters and use this method to analyze gas-bearing samples. We first derive three linear equations for numerical calculations. They are the equation of density p versus porosity Ф, density times the square of compressional wave velocity p Vp^2 versus porosity, and density times the square of shear wave velocity pVs^2 versus porosity. Here porosity is viewed as an independent variable and the other parameters are dependent variables. We elaborate on the calculation steps and provide some notes. Then we use our method to analyze gas-bearing sandstone samples. In the calculations, density and P- and S-velocities are input data and we calculate eleven relative parameters for porous fluid, framework, and critical point. In the end, by comparing our results with experiment measurements, we prove the viability of the method.
文摘The origin and substance of the tlywheel moment calculation method of inertia mo ment of crane mechanism are set forth comprehensively and systematically in this paper, that is, the nucleus or the focus ofmoment of inertia calculation is the problem of calculating convertible tlywheelmoment. It is much better for the calculation of flywheel moment of loading move mass of lifting, traveling and rotating mechanism using the low of conservation of energy, the theorem of kinetic energyfor that of radius - changing mechanism, and the law of conservation of energy for that of all parts of gearing mechanism.
基金National Key Science&Technology Project“Shale Gas Resource Evaluation and Regional Selection in Upper Yangtze and Dian(Yunnan)-Qian(Guizhou)-Gui(Guangxi)”(No.14B12XQ151001).
文摘Various methods are available for calculating the TOC of shale reservoirs with logging data, and each method has its unique applicability andaccuracy. So it is especially important to establish a regional experimental calculation model based on a thorough analysis of their applicability.With the Upper Ordovician Wufeng Fm-Lower Silurian Longmaxi Fm shale reservoirs as an example, TOC calculation models were built by useof the improved DlgR, bulk density, natural gamma spectroscopy, multi-fitting and volume model methods respectively, considering the previousresearch results and the geologic features of the area. These models were compared based on the core data. Finally, the bulk density method wasselected as the regional experimental calculation model. Field practices demonstrated that the improved DlgR and natural gamma spectroscopymethods are poor in accuracy;although the multi-fitting method and bulk density method have relatively high accuracy, the bulk density methodis simpler and wider in application. For further verifying its applicability, the bulk density method was applied to calculate the TOC of shalereservoirs in several key wells in the Jiaoshiba shale gas field, Sichuan Basin, and the calculation accuracy was clarified with the measured dataof core samples, showing that the coincidence rate of logging-based TOC calculation is up to 90.5%-91.0%.
文摘The structure-activity relationship of functional materials is an everlasting and desirable research question for material science researchers,where characterization and calculation tools are the keys to deciphering this intricate relationship.Here,we choose rechargeable battery materials as an example and introduce the most representative advanced characterization and calculation methods in four different scales:real space,energy,momentum space,and time.Current research methods to study battery material structure,energy level transition,dispersion relations of phonons and electrons,and time-resolved evolution are reviewed.From different views,various expression forms of structure and electronic structure are presented to understand the reaction processes and electrochemical mechanisms comprehensively in battery systems.According to the summary of the present battery research,the challenges and perspectives of advanced characterization and calculation techniques for the field of rechargeable batteries are further discussed.
