In this study,a fully coupled hydromechanical model within the extended finite element method(XFEM)-based cohesive zone method(CZM)is employed to investigate the simultaneous height growth behavior of multi-cluster hy...In this study,a fully coupled hydromechanical model within the extended finite element method(XFEM)-based cohesive zone method(CZM)is employed to investigate the simultaneous height growth behavior of multi-cluster hydraulic fractures in layered porous reservoirs with modulus contrast.The coupled hydromechanical model is first verified against an analytical solution and a laboratory experiment.Then,the fracture geometry(e.g.height,aperture,and area)and fluid pressure evolutions of multiple hydraulic fractures placed in a porous reservoir interbedded with alternating stiff and soft layers are investigated using the model.The stress and pore pressure distributions within the layered reservoir during fluid injection are also presented.The simulation results reveal that stress umbrellas are easily to form among multiple hydraulic fractures’tips when propagating in soft layers,which impedes the simultaneous height growth.It is also observed that the impediment effect of soft layer is much more significant in the fractures suppressed by the preferential growth of adjoining fractures.After that,the combined effect of in situ stress ratio and fracturing spacing on the multi-fracture height growth is presented,and the results elucidate the influence of in situ stress ratio on the height growth behavior depending on the fracture spacing.Finally,it is found that the inclusion of soft layers changes the aperture distribution of outmost and interior hydraulic fractures.The results obtained from this study may provide some insights on the understanding of hydraulic fracture height containment observed in filed.展开更多
Water vapour and carbon dioxide as the main products in combustion chamber have strong non-gray radiation properties. Multidimensional mathematical models were developed by zone method considering the non-gray radiati...Water vapour and carbon dioxide as the main products in combustion chamber have strong non-gray radiation properties. Multidimensional mathematical models were developed by zone method considering the non-gray radiation properties of gas in combustion chamber. Edwards exponential wide band model （EBWM） was adopted to calculate the non-gray radiation properties of gas, and the three-point Gauss-Legendre integral formula was used to calculate direct radiation exchange areas. Reflected radiation heat fluxes were obtained by Gauss elimination method, and energy balance equations were solved by main variable correction method. An example was given to validate the developed models, and further investigation of effects of flame distribution on heat transfer was carried on.展开更多
A highly transparent Eu3＋-doped CaGdA104 （CGA） single crystal is grown by the floating zone method. The segregation coefficient, x ray diffraction, and x ray rocking curve are detected, and the results reveal that ...A highly transparent Eu3＋-doped CaGdA104 （CGA） single crystal is grown by the floating zone method. The segregation coefficient, x ray diffraction, and x ray rocking curve are detected, and the results reveal that the single crystal is of high quality. The f-f transitions of Eu3＋ in the host lattice are discussed. The 5D0-7F2 emis- sion transition at 621 nm （red light） is dominant over the 5D0-7F1 emission transitions at 591 and 599 nm （orange light）, agreeing well with the random crystal environment of Eu3＋ ions in a CGA crystal. The decay time of Eu：5D0 is measured to be 1.02 ms. All the results show that the Eu：CGA crystal has good optical char- acterization and promises to be an excellent red- fluorescence material.展开更多
Identifying state transition and determining the critical value of the Duffing oscillator are crucial to indicating external signal existence and have a great influence on detection accuracy in weak signal detection. ...Identifying state transition and determining the critical value of the Duffing oscillator are crucial to indicating external signal existence and have a great influence on detection accuracy in weak signal detection. A circular zone counting （CZC） method is proposed in this paper, by combining the Duffing oscillator＇s phase trajectory feature and numerical calculation for quickly and accurately identifying state transition and determining the critical value, to realize a high- efficiency weak signal detection. Detailed model analysis and method construction of the CZC method are introduced. Numerical experiments into the reliability of the proposed CZC method compared with the maximum Lyapunov exponent （MLE） method are carried out. The CZC method is demonstrated to have better detecting ability than the MLE method, and furthermore it is simpler and clearer in calculation to extend to engineering application.展开更多
Based on the principle of discrete element method （DEM）, a 2D slot model of a COREX melter gasifier was established to analyze the influence of cohesive zone shape on solid flow, including mass distribution, velocit...Based on the principle of discrete element method （DEM）, a 2D slot model of a COREX melter gasifier was established to analyze the influence of cohesive zone shape on solid flow, including mass distribution, velocity distribution, normal force distribution and porosity distribution at a microscopic level. The results show that the co- hesive zone shape almost does not affect the particle movement in the upper shaft and deadman shape. The particles in the lower central bottom experience large normal force to support the particles above them, while particles around the raceway and in the fast flow zone exhibit weak force network. The porosity distribution was also examined under three kinds of cohesive zones. Like the velocity distribution, the whole packed bed can be divided into four main re- gions. With the increase of cohesive zone position, the low porosity region located in the root of cohesive zone increa- ses. And the porosity distribution becomes asymmetric in the case of biased cohesive zone.展开更多
New approximate formulas are proposed to determine the natural frequencies of structures considering the effects of panel zone flexibility and soil-structure interaction. Several structures with various earthquake res...New approximate formulas are proposed to determine the natural frequencies of structures considering the effects of panel zone flexibility and soil-structure interaction. Several structures with various earthquake resisting systems are idealized as prismatic cantilever flexural-shear beams. Floor masses are considered as lumped masses at each story level and masses of columns are evenly distributed along the cantilever beam. Soil-structure interaction is considered as axial and rotational springs, whose potential energy are formulated and incorporated into overall potential energy of the structure. Subsequently, natural frequency equations are derived on the basis of energy conservation principle. The effect of axial forces on natural frequency is also considered in the proposed formulas. Using the method presented in this study, natural frequencies are computed using a simplified method with no complex numerical modeling. The proposed formulas are verified via experimental and numerical methods. Close agreement between the results from these three approaches are observed. Furthermore, the effects of panel zone flexibility, continuity plates and doubler plates on the natural frequencies of buildings are investigated.展开更多
An accurate determination of lightning protection zone is an important issue in the analysis and design of an appropri-ate lightning protection system. This paper presents a fast and accurate protection zone determina...An accurate determination of lightning protection zone is an important issue in the analysis and design of an appropri-ate lightning protection system. This paper presents a fast and accurate protection zone determination methodology for metallic lightning rod. The methodology is based on Quasi Monte Carlo Integration technique applied to Method of Moments (MoM) solution of Integral Equations. As an example, solution of the integral equation for unknown charge distribution on lightning rod is obtained. The electric field in the region surrounding the rod is then computed and the protection zone plotted accordingly. The effect of the thickness of the rod on the protection zone is also studied.展开更多
Effective and efficient SAR image segmentation has a significant role in coastal zone interpretation. In this paper, a coastal zone segmentation model is proposed based on Potts model. By introducing edge self-adaptio...Effective and efficient SAR image segmentation has a significant role in coastal zone interpretation. In this paper, a coastal zone segmentation model is proposed based on Potts model. By introducing edge self-adaption parameter and modifying noisy data term, the proposed variational model provides a good solution for the coastal zone SAR image with common characteristics of inherent speckle noise and complicated geometrical details. However, the proposed model is difficult to solve due to to its nonlinear, non-convex and non-smooth characteristics. Followed by curve evolution theory and operator splitting method, the minimization problem is reformulated as a constrained minimization problem. A fast alternating minimization iterative scheme is designed to implement coastal zone segmentation. Finally, various two-stage and multiphase experimental results illustrate the advantage of the proposed segmentation model, and indicate the high computation efficiency of designed numerical approximation algorithm.展开更多
On the basis of the recent geological surveys and the relevant studies of the Xianshuihe fault zone, this paper analyzes the seismogenic mechanism of some faults and characteristic morphology on the fault zone by the ...On the basis of the recent geological surveys and the relevant studies of the Xianshuihe fault zone, this paper analyzes the seismogenic mechanism of some faults and characteristic morphology on the fault zone by the boundary element method and discusses the fault segmentation and the related distribution of the earthquake ruptures. The main conclusions are: For the first order segmentation, the Xianshuihe fault zone can be divided into three major segments (the northwestern Luhuo-Qianning segment, the middle linking fracture region and the southeastern Kangding segment). Among them, the differences are not only in geometry and structure, but also in mechanical property and dynamics. Some of the characteristic morphologies on the Xianshuihe fault zone reflect the effects in cumulative deformation due to long-term fault movement, and reveal the fault segmentation in different orders. Such morphologies control, to some extent, the developments and the distributions of the earthquake ruptures on the fault zone.展开更多
A three-dimensional finite element thermal model in direct metal laser sintering(DMLS) including the effect of powder-to-solid transition were established to predict sintering zone, which benefited the determination o...A three-dimensional finite element thermal model in direct metal laser sintering(DMLS) including the effect of powder-to-solid transition were established to predict sintering zone, which benefited the determination of suitable process parameters in DMLS. The nonlinear transient model of the metals thermal conductivity for powder-to-solid transition was developed. The model uses solid thermal properties of material in liquid-phase zone, transitional ones in sintering or sintered zone and powder ones in unsintered zones of powder bed to predict, respectively. Sintering zone boundary was estimated by maximum temperature history profile. Experiments were carried out using multi-component Cu-based metal powder. Compared experimental and predicted results, the mean error of sintering depth and width are 7.8% and 14.4%, respectively, which confirms the accuracy of the FEM prediction.展开更多
Single crystals of La0.67Ca0.33MnO3 and La0.67Ca0.33Mn0.96Fe0.04O3 were obtained by floating zone method. Laue diffraction pattern and rocking curve of the single crystals show that their quality is good. The magnetic...Single crystals of La0.67Ca0.33MnO3 and La0.67Ca0.33Mn0.96Fe0.04O3 were obtained by floating zone method. Laue diffraction pattern and rocking curve of the single crystals show that their quality is good. The magnetic behaviours of these compounds have been studied. Fe doping significantly depresses the magnetic contribution to the total specific heat Cp, but slightly influences the lattice contribution at temperatures above 50K. The peak of Cp shifts towards high temperatures with increasing magnetic field. Both single crystals exhibit the first-order magnetic transition around the Curie temperature.展开更多
This paper discusses the calculation of plastic zone properties around circular tunnels to rock-masses that satisfy the Hoek–Brown failure criterion in non-hydrostatic condition,and reviews the calculation of plastic...This paper discusses the calculation of plastic zone properties around circular tunnels to rock-masses that satisfy the Hoek–Brown failure criterion in non-hydrostatic condition,and reviews the calculation of plastic zone and displacement,and the basis of the convergence–confinement method in hydrostatic condition.A two-dimensional numerical simulation model was developed to gain understanding of the plastic zone shape.Plastic zone radius in any angles around the tunnel is analyzed and measured,using different values of overburden(four states)and stress ratio(nine states).Plastic zone radius equations were obtained from fitting curve to data which are dependent on the values of stress ratio,angle and plastic zone radius in hydrostatic condition.Finally validation of this equation indicate that results predict the real plastic zone radius appropriately.展开更多
文摘In this study,a fully coupled hydromechanical model within the extended finite element method(XFEM)-based cohesive zone method(CZM)is employed to investigate the simultaneous height growth behavior of multi-cluster hydraulic fractures in layered porous reservoirs with modulus contrast.The coupled hydromechanical model is first verified against an analytical solution and a laboratory experiment.Then,the fracture geometry(e.g.height,aperture,and area)and fluid pressure evolutions of multiple hydraulic fractures placed in a porous reservoir interbedded with alternating stiff and soft layers are investigated using the model.The stress and pore pressure distributions within the layered reservoir during fluid injection are also presented.The simulation results reveal that stress umbrellas are easily to form among multiple hydraulic fractures’tips when propagating in soft layers,which impedes the simultaneous height growth.It is also observed that the impediment effect of soft layer is much more significant in the fractures suppressed by the preferential growth of adjoining fractures.After that,the combined effect of in situ stress ratio and fracturing spacing on the multi-fracture height growth is presented,and the results elucidate the influence of in situ stress ratio on the height growth behavior depending on the fracture spacing.Finally,it is found that the inclusion of soft layers changes the aperture distribution of outmost and interior hydraulic fractures.The results obtained from this study may provide some insights on the understanding of hydraulic fracture height containment observed in filed.
基金Item Sponsored by National Basic Research Program of China (2006CB601203)
文摘Water vapour and carbon dioxide as the main products in combustion chamber have strong non-gray radiation properties. Multidimensional mathematical models were developed by zone method considering the non-gray radiation properties of gas in combustion chamber. Edwards exponential wide band model （EBWM） was adopted to calculate the non-gray radiation properties of gas, and the three-point Gauss-Legendre integral formula was used to calculate direct radiation exchange areas. Reflected radiation heat fluxes were obtained by Gauss elimination method, and energy balance equations were solved by main variable correction method. An example was given to validate the developed models, and further investigation of effects of flame distribution on heat transfer was carried on.
基金supported by the Natural Science Foundation of Shanghai under Grant No.15ZR1444700
文摘A highly transparent Eu3＋-doped CaGdA104 （CGA） single crystal is grown by the floating zone method. The segregation coefficient, x ray diffraction, and x ray rocking curve are detected, and the results reveal that the single crystal is of high quality. The f-f transitions of Eu3＋ in the host lattice are discussed. The 5D0-7F2 emis- sion transition at 621 nm （red light） is dominant over the 5D0-7F1 emission transitions at 591 and 599 nm （orange light）, agreeing well with the random crystal environment of Eu3＋ ions in a CGA crystal. The decay time of Eu：5D0 is measured to be 1.02 ms. All the results show that the Eu：CGA crystal has good optical char- acterization and promises to be an excellent red- fluorescence material.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61172047 and 61071025)
文摘Identifying state transition and determining the critical value of the Duffing oscillator are crucial to indicating external signal existence and have a great influence on detection accuracy in weak signal detection. A circular zone counting （CZC） method is proposed in this paper, by combining the Duffing oscillator＇s phase trajectory feature and numerical calculation for quickly and accurately identifying state transition and determining the critical value, to realize a high- efficiency weak signal detection. Detailed model analysis and method construction of the CZC method are introduced. Numerical experiments into the reliability of the proposed CZC method compared with the maximum Lyapunov exponent （MLE） method are carried out. The CZC method is demonstrated to have better detecting ability than the MLE method, and furthermore it is simpler and clearer in calculation to extend to engineering application.
基金Item Sponsored by the Fundamental Research Funds for the Central Universities of China(N090402021)
文摘Based on the principle of discrete element method （DEM）, a 2D slot model of a COREX melter gasifier was established to analyze the influence of cohesive zone shape on solid flow, including mass distribution, velocity distribution, normal force distribution and porosity distribution at a microscopic level. The results show that the co- hesive zone shape almost does not affect the particle movement in the upper shaft and deadman shape. The particles in the lower central bottom experience large normal force to support the particles above them, while particles around the raceway and in the fast flow zone exhibit weak force network. The porosity distribution was also examined under three kinds of cohesive zones. Like the velocity distribution, the whole packed bed can be divided into four main re- gions. With the increase of cohesive zone position, the low porosity region located in the root of cohesive zone increa- ses. And the porosity distribution becomes asymmetric in the case of biased cohesive zone.
文摘New approximate formulas are proposed to determine the natural frequencies of structures considering the effects of panel zone flexibility and soil-structure interaction. Several structures with various earthquake resisting systems are idealized as prismatic cantilever flexural-shear beams. Floor masses are considered as lumped masses at each story level and masses of columns are evenly distributed along the cantilever beam. Soil-structure interaction is considered as axial and rotational springs, whose potential energy are formulated and incorporated into overall potential energy of the structure. Subsequently, natural frequency equations are derived on the basis of energy conservation principle. The effect of axial forces on natural frequency is also considered in the proposed formulas. Using the method presented in this study, natural frequencies are computed using a simplified method with no complex numerical modeling. The proposed formulas are verified via experimental and numerical methods. Close agreement between the results from these three approaches are observed. Furthermore, the effects of panel zone flexibility, continuity plates and doubler plates on the natural frequencies of buildings are investigated.
文摘An accurate determination of lightning protection zone is an important issue in the analysis and design of an appropri-ate lightning protection system. This paper presents a fast and accurate protection zone determination methodology for metallic lightning rod. The methodology is based on Quasi Monte Carlo Integration technique applied to Method of Moments (MoM) solution of Integral Equations. As an example, solution of the integral equation for unknown charge distribution on lightning rod is obtained. The electric field in the region surrounding the rod is then computed and the protection zone plotted accordingly. The effect of the thickness of the rod on the protection zone is also studied.
基金supported by the China Postdoctoral Science Foundation under Grant No.2015M571993the Shandong Provincial Natural Science Foundation,China under Grant No.ZR2017MD004+1 种基金the National Natural Science Foundation of China under Grant No.61602269Qingdao Postdoctoral Application Research Funded Project
文摘Effective and efficient SAR image segmentation has a significant role in coastal zone interpretation. In this paper, a coastal zone segmentation model is proposed based on Potts model. By introducing edge self-adaption parameter and modifying noisy data term, the proposed variational model provides a good solution for the coastal zone SAR image with common characteristics of inherent speckle noise and complicated geometrical details. However, the proposed model is difficult to solve due to to its nonlinear, non-convex and non-smooth characteristics. Followed by curve evolution theory and operator splitting method, the minimization problem is reformulated as a constrained minimization problem. A fast alternating minimization iterative scheme is designed to implement coastal zone segmentation. Finally, various two-stage and multiphase experimental results illustrate the advantage of the proposed segmentation model, and indicate the high computation efficiency of designed numerical approximation algorithm.
文摘On the basis of the recent geological surveys and the relevant studies of the Xianshuihe fault zone, this paper analyzes the seismogenic mechanism of some faults and characteristic morphology on the fault zone by the boundary element method and discusses the fault segmentation and the related distribution of the earthquake ruptures. The main conclusions are: For the first order segmentation, the Xianshuihe fault zone can be divided into three major segments (the northwestern Luhuo-Qianning segment, the middle linking fracture region and the southeastern Kangding segment). Among them, the differences are not only in geometry and structure, but also in mechanical property and dynamics. Some of the characteristic morphologies on the Xianshuihe fault zone reflect the effects in cumulative deformation due to long-term fault movement, and reveal the fault segmentation in different orders. Such morphologies control, to some extent, the developments and the distributions of the earthquake ruptures on the fault zone.
文摘A three-dimensional finite element thermal model in direct metal laser sintering(DMLS) including the effect of powder-to-solid transition were established to predict sintering zone, which benefited the determination of suitable process parameters in DMLS. The nonlinear transient model of the metals thermal conductivity for powder-to-solid transition was developed. The model uses solid thermal properties of material in liquid-phase zone, transitional ones in sintering or sintered zone and powder ones in unsintered zones of powder bed to predict, respectively. Sintering zone boundary was estimated by maximum temperature history profile. Experiments were carried out using multi-component Cu-based metal powder. Compared experimental and predicted results, the mean error of sintering depth and width are 7.8% and 14.4%, respectively, which confirms the accuracy of the FEM prediction.
文摘Single crystals of La0.67Ca0.33MnO3 and La0.67Ca0.33Mn0.96Fe0.04O3 were obtained by floating zone method. Laue diffraction pattern and rocking curve of the single crystals show that their quality is good. The magnetic behaviours of these compounds have been studied. Fe doping significantly depresses the magnetic contribution to the total specific heat Cp, but slightly influences the lattice contribution at temperatures above 50K. The peak of Cp shifts towards high temperatures with increasing magnetic field. Both single crystals exhibit the first-order magnetic transition around the Curie temperature.
文摘This paper discusses the calculation of plastic zone properties around circular tunnels to rock-masses that satisfy the Hoek–Brown failure criterion in non-hydrostatic condition,and reviews the calculation of plastic zone and displacement,and the basis of the convergence–confinement method in hydrostatic condition.A two-dimensional numerical simulation model was developed to gain understanding of the plastic zone shape.Plastic zone radius in any angles around the tunnel is analyzed and measured,using different values of overburden(four states)and stress ratio(nine states).Plastic zone radius equations were obtained from fitting curve to data which are dependent on the values of stress ratio,angle and plastic zone radius in hydrostatic condition.Finally validation of this equation indicate that results predict the real plastic zone radius appropriately.
