Context:In irrigated agriculture,the salt stress is a major problem due to accumulation of salt from the irrigation water in the soil layers.Objectives:The aim of this study is to determinate the effect of salinity on...Context:In irrigated agriculture,the salt stress is a major problem due to accumulation of salt from the irrigation water in the soil layers.Objectives:The aim of this study is to determinate the effect of salinity on some agromorphological traits and seed nutritional quality of three sesames(Sesamum indicum L.)varieties.Methodology:This is how four solutions of different NaCl concentrations from 0,60,120 to 240 mM were used to water sesame plants at the five-leaves stage and this for two months in completely randomized device with four repetitions.Results:The results show a negative effect of the salinity growth and yield parameters,mineral elements,ascorbic acid(to 21.4% in White cultivar,28% in Brown and 24.2% in Black cultivar from 0 to 240 mM NaCl),oil(to 22.6%in White cultivar,32% in Brown and 25.5% in Black cultivar from 0 to 240 mM NaCl)and accumulation of Na(Sodium)content(to 11.8% in White cultivar,15.3% in Brown and 12.2% in Black cultivar from 0 to 240 mM NaCl),osmolytes as proteins(to 14.5% in White cultivar,11.5% in Brown and 9.6%in Black cultivar from 0 to 240 mM NaCl)and antioxydants components.Varieties White and Brown were less affected by salinity.Conclusion:White variety exhibited higher adaptive potential under salinity stress when compared to Brown variety(rich in fiber)and closely followed by Black variety.Thus White variety could be recommended for consumer oil,minerals and proteins.As for Black variety,it could be used,as glucid and antioxydants additives in food.展开更多
Bacterial wilt(BW)caused by Ralstonia solanacearum is a wide-spread and serious disease in peanut.To date,this soilborne disease could only be effectively controlled by planting resistant peanut cultivars.However,the ...Bacterial wilt(BW)caused by Ralstonia solanacearum is a wide-spread and serious disease in peanut.To date,this soilborne disease could only be effectively controlled by planting resistant peanut cultivars.However,the relatively lower yield potential of the available BW-resistant peanut cultivars is a key reason restricting productivity in most epidemic regions naturally infested with the pathogen.Even small pods or seeds and low number per plant has been regarded as the key factor for the low yield potential both in BW-resistant peanut germplasm lines and available released cultivars,whether the resistance is closely linked with key yield components remains unclear.In this study,the relationship between pod weight and BW resistance was analyzed by using a recombinant inbred lines(RIL)population derived from a crossing combination between a high yielding cultivar Xuhua 13 and a BW-resistant cultivar Zhonghua 6.From the experiments,it was found that the BW resistance was not significantly correlated with pod number per plant(PNP),hundred pod weight(HPW)and pod weight per plant(PWP)in the RIL population.Based on linkage analysis,the quantitative trait locus(QTL)s related to PNP were identified on A06,A07,A08 and B03.The QTLs for HPW were detected on A05 and A07,and the QTLs for PWP were on A06,A07 and B03.However,the QTL for BW resistance identified on B02.These results indicated that the BW resistance and the pod number per plant as well as pod weight were inherited independently.Two recombined lines(QT0944 and QT1028)with high level BW resistance and large pods(hundred pod weight over 185g)were identified from the RILs,and they possessed the favored alleles of identified QTLs from both parents,which could be used in peanut breeding for high yield and high level disease resistance.展开更多
Herbicide safeners alleviate herbicide toxicity while preserving weed-control efficacy in common buckwheat.A three-year field experiment was performed to measure the effects of quizalofop-P-ethyl(QPE)alone or in combi...Herbicide safeners alleviate herbicide toxicity while preserving weed-control efficacy in common buckwheat.A three-year field experiment was performed to measure the effects of quizalofop-P-ethyl(QPE)alone or in combination with gibberellin or brassinolide on soil enzyme activity and yield components in common buckwheat.The herbicide-brassinolide application yielded the greatest increases in soil enzyme activity and yield components without sacrificing weed control efficacy.It is recommended for use in common buckwheat cultivation in the Loess Plateau.展开更多
In Kansas, productivity of grain sorghum [Sorghum bicolor (L.) Moench] is affected by weather conditions at planting and during pollination. Planting date management and selection of hybrid maturity group can help to ...In Kansas, productivity of grain sorghum [Sorghum bicolor (L.) Moench] is affected by weather conditions at planting and during pollination. Planting date management and selection of hybrid maturity group can help to avoid severe environmental stresses during these sensitive stages. The hypothesis of the study was that late May planting improves grain sorghum yield and yield components compared with late June planting. The objectives of this research were to investigate the influence of planting dates yield and yield components of different grain sorghum hybrids, and to determine the optimal planting date and hybrid combination for maximum biomass and grains production. Three sorghum hybrids (early, medium, and late maturing) were planted in late May and late June without irrigation in Kansas at Manhattan/Ashland Bottom Research Station, and Hutchinson in 2010;and at Manhattan/North Farm and Hutchinson in 2011. Data on dry matter production, yield and yield components were collected. Grain yield and yield components were influenced by planting date depending on environmental conditions. At Manhattan (2010), greater grain yield, number of heads per plant, were obtained with late-June planting compared with late May planting, while at Hutchinson (2010) greater yield was obtained with late May planting for all hybrids. The yield component most affected at Hutchinson was the number of kernels∙panicle<sup>−1</sup> and plant density. Late-May planting was favorable for late maturing hybrid (P84G62) in all locations. However, the yield of early maturing hybrid (DKS 28-05) and medium maturing hybrid (DKS 37-07) was less affected by delayed planting. The effects of planting dates on yield and yield components of grain sorghum hybrids were found to be variable among hybrid maturity groups and locations.展开更多
Organic material combined with inorganic fertilizer has been shown to greatly improve crop yield and maintain soil fertility globally. However, it remains unclear if crop yield and soil fertility can be sustained in t...Organic material combined with inorganic fertilizer has been shown to greatly improve crop yield and maintain soil fertility globally. However, it remains unclear if crop yield and soil fertility can be sustained in the long term under the combined application of organic and inorganic fertilizers. Three long-term field trials were conducted to investigate the effects of organic amendments on the grain sustainable yield index(SYI), soil fertility index(SFI)and nutrient balance in maize–wheat cropping systems of central and southern China during 1991–2019. Five treatments were included in the trials: 1) no fertilization(control);2) balanced mineral fertilization(NPK);3) NPK plus manure(NPKM);4) high dose of NPK plus manure(1.5NPKM);and 5) NPK plus crop straw(NPKS). Over time, the grain yields of wheat and maize showed an increasing trend in all four fertilization treatments at the Yangling(YL) and Zhengzhou(ZZ) locations, while they declined at Qiyang(QY). The grain yield in the NPKM and 1.5NPKM treatments gradually exceeded that of the NPK and NPKS treatments at the QY site. The largest SYI was recorded in the NPKM treatment across the three sites, suggesting that inorganic fertilizer combined with manure can effectively improve crop yield sustainability. Higher SYI values were recorded at the YL and ZZ sites than at the QY site, possibly because the soil was more acid at QY. The key factors affecting grain yield were soil available phosphorus(AP) and available potassium(AK) at the YL and ZZ sites, and pH and AP at the QY site.All fertilization treatments resulted in soil N and P surpluses at the three sites, but soil K surpluses were recorded only at the QY site. The SFI was greater in the 1.5NPKM, NPKM and NPKS treatments than in the NPK treatment by 13.3–40.0 and 16.4–63.6% at the YL and ZZ sites, respectively, and was significantly higher in the NPKM and 1.5NPKM treatments than in the NPK and NPKS treatments at the QY site. A significant, positive linear relationship was found between SFI and crop yield, and SYI and nutrient balance, indicating that grain yield and its sustainability significantly increased with increasing soil fertility. The apparent N, P and K balances positively affected SFI.This study suggests that the appropriate amount of manure mixed with mineral NPK fertilizer is beneficial to the development of sustainable agriculture, which effectively increases the crop yield and yield sustainability by improving soil fertility.展开更多
Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop mor...Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop morphological development and increase yield.Here,a three-year study was performed to verify the feasibility of adjusting row spacing to further enhance yield in densely planted soybeans.Of three row-spacing configurations(40-40,20-40,and 20-60 cm)and two planting densities(normal 180,000 plants ha 1 and high 270,000 plants ha 1).The differences in canopy structure,plant morphological development,photosynthetic capacity and their impact on yield were analyzed.Row spacing configurations have a significant effect on canopy transmittance(CT).The 20-60 cm row spacing configuration increased CT and creates a favorable canopy light environment,in which plant height is reduced,while branching is promoted.This approach reduces plant competition,optimizes the developments of leaf area per plant,specific leaf area,leaf area development rate,leaf area duration and photosynthetic physiological indices(F_(v)/F_(m),ETR,P_(n)).The significant increase of 11.9%-34.2%in canopy apparent photosynthesis(CAP)is attributed to the significant optimization of plant growth and photosynthetic physiology through CT,an important contributing factor to yield increases.The yield in the 20-60 cm treatment is 4.0%higher than in equidistant planting under normal planting density,but 5.9%under high density,primarily driven by CAP and pod number.These findings suggest that suitable row spacing configurations optimize the light environment for plants,promote source-sink transformation in soybeans,and further improve yield.In practice,a 20-60 cm row spacing configuration could be employed for high-density soybean planting to achieve a more substantial yield gain.展开更多
Biochar and animal manure application can improve crop yields in salt-affected soil.Previous studies have primarily applied biochar and animal manure either alone or at fixed ratios,while their combined effects with v...Biochar and animal manure application can improve crop yields in salt-affected soil.Previous studies have primarily applied biochar and animal manure either alone or at fixed ratios,while their combined effects with varying combination proportions are still unclear.To address this knowledge gap,we performed a 2-a experiment(2023-2024)in a salinized cotton field in Wensu County of Xinjiang Uygur Autonomous Region of China with the following 6 treatments:control;application of biochar(10t/hm^(2))alone(BC100%);application of cow manure(10 t/hm^(2))alone(CM100%);application of 70%biochar(7 t/hm^(2))combined with 30%cow manure(3 t/hm^(2))(BC70%+CM30%);application of 50%biochar(5 t/hm^(2))combined with 50%cow manure(5 t/hm^(2))(BC50%+CM50%);and application of 30%biochar(3 t/hm^(2))combined with 70%cow manure(7 t/hm^(2))(BC30%+CM70%).By measuring soil pH,electrical conductivity,soil organic matter,available phosphorus,available potassium,and available nitrogen at 0-20 and 20-40 cm depths,as well as yield components and cotton yield in 2023 and 2024,this study revealed that soil nutrients in the 0-20 cm depth were more sensitive to the treatment.Among all the treatments,BC50%+CM50%treatment had the highest value of soil pH(9.63±0.07)but the lowest values of electrical conductivity(161.9±31.8μS/cm),soil organic matter(1.88±0.27 g/kg),and available potassium(42.72±8.25 mg/kg)in 2024.Moreover,the highest cotton yield(5336.63±467.72 kg/hm^(2))was also observed under BC50%+CM50%treatment in 2024,which was 1.9 times greater than that under the control treatment.In addition,cotton yield in 2023 was jointly determined by yield components(density and number of cotton bolls)and soil nutrients(available phosphorus and available potassium),but in 2024,cotton yield was only positively related to yield components(density,number of cotton bolls,and single boll weight).Overall,this study highlighted that in salt-affected soil,the combination of biochar and cow manure at a 1:1 ratio is recommended for increasing cotton yield and reducing soil salinity stress.展开更多
Diversifying crop rotation aims to balance production and ecological concerns.However,yield and water use efficiency(WUE)of crop in diversified rotation systems have not been well documented,especially under limited i...Diversifying crop rotation aims to balance production and ecological concerns.However,yield and water use efficiency(WUE)of crop in diversified rotation systems have not been well documented,especially under limited irrigation.Here,we conducted a 6-year experiment with five treatments:1)wheatmaize cropping system(WM),as control;2)WMME,spring maize→WM rotation;3)WMML,spring millet→WM rotation;4)WMMP,spring peanut→WM rotation;and 5)WMMS,spring soybean→WM rotation,to explore how diversified rotations affected yield and WUE of wheat.Results showed that approximately 60% higher precipitation during wheat growing season in Cycle 1(2015-2017)resulted in yield increases by 33.8%-55.7% compared to those in Cycle 2(2017-2019)and Cycle3(2019-2021).Grain yield and WUE of wheat were 16.7% and 9.6% higher in Cycle 1,81.5% and 86.8% higher in Cycle 2,and 56.1% and 78.7% higher in Cycle 3 on average in diversified rotations compared to those in WM,respectively.Further analysis revealed that spike number and aboveground biomass were the main contributors to the increments,which can be explained by the increased evapotranspiration during the middle-late wheat growth stages(e.g.,regreening,jointing,and anthesis)in diversified rotations.In general,diversified rotations enhanced synchronization of soil water supply with crop water demand by affecting the spatiotemporal dynamics of soil moisture under varied precipitation conditions,thereby increasing yield and WUE of wheat.Hence,diversified spring crops→WM rotations offer a sustainable and efficient strategy for enhancing wheat production and water conservation in dry areas.展开更多
Agricultural practices significantly contribute to greenhouse gas(GHG)emissions,necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production.Plastic film mulc...Agricultural practices significantly contribute to greenhouse gas(GHG)emissions,necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production.Plastic film mulching is commonly used in the Loess Plateau region.Incorporating slow-release fertilizers as a replacement for urea within this practice can reduce nitrogen losses and enhance crop productivity.Combining these techniques represents a novel agricultural approach in semi-arid areas.However,the impact of this integration on soil carbon storage(SOCS),carbon footprint(CF),and economic benefits has received limited research attention.Therefore,we conducted an eight-year study(2015-2022)in the semi-arid northwestern region to quantify the effects of four treatments[urea supplied without plastic film mulching(CK-U),slow-release fertilizer supplied without plastic film mulching(CK-S),urea supplied with plastic film mulching(PM-U),and slow-release fertilizer supplied with plastic film mulching(PM-S)]on soil fertility,economic and environmental benefits.The results revealed that nitrogen fertilizer was the primary contributor to total GHG emissions(≥71.97%).Compared to other treatments,PM-S increased average grain yield by 12.01%-37.89%,water use efficiency by 9.19%-23.33%,nitrogen accumulation by 27.07%-66.19%,and net return by 6.21%-29.57%.Furthermore,PM-S decreased CF by 12.87%-44.31%and CF per net return by 14.25%-41.16%.After eight years,PM-S increased SOCS(0-40 cm)by 2.46%,while PM-U decreased it by 7.09%.These findings highlight the positive effects of PM-S on surface soil fertility,economic gains,and environmental benefits in spring maize production on the Loess Plateau,underscoring its potential for widespread adoption and application.展开更多
Increasing the grain yield(GY) and water use efficiency(WUE) of winter wheat in the Huaibei Plain(HP), China are essential. However, the effects of micro-sprinkler irrigation and topsoil compaction after wheat seed so...Increasing the grain yield(GY) and water use efficiency(WUE) of winter wheat in the Huaibei Plain(HP), China are essential. However, the effects of micro-sprinkler irrigation and topsoil compaction after wheat seed sowing on the GY and WUE are unclear. Therefore, a two-year field experiment was conducted during the 2021–2023 winter wheat growing seasons with a total six treatments: rain-fed(RF), conventional irrigation(CI) and micro-sprinkler irrigation(MI), as well as topsoil compaction after seed sowing under these three irrigation methods(RFC, CIC, and MIC). The results in the two years indicated that MI significantly increased GY compared to CI and RF, by averages of 17.9 and 42.1%, respectively. The increase in GY of MI was due to its significant increases in the number of spikes, kernels per spike, and grain weight. The chlorophyll concentration in flag leaves of MI after the anthesis stage maintained higher levels than with CI and RF, and was the lowest in RF. This was due to the dramatically enhanced catalase and peroxidase activities and lower malondialdehyde content under MI. Compared with RF and CI, MI significantly promoted dry matter remobilization and production after anthesis, as well as its contribution to GY. In addition, MI significantly boosted root growth, and root activity during the grain-filling stage was remarkably enhanced compared to CI and RF. In 2021–2022, there was no significant difference in WUE between MI and RF, but the WUE of RF was significantly lower than that of MI in 2022–2023. However, the WUE in MI was significantly improved compared to CI, and it increased by averages of 15.1 and 17.6% for the two years. Topsoil compaction significantly increased GY and WUE under rain-fed conditions due to improved spike numbers and dry matter production. Overall, topsoil compaction is advisable for enhancing GY and WUE in rain-fed conditions, whereas micro-sprinkler irrigation can be adopted to simultaneously achieve high GY and WUE in the HP.展开更多
The increase in soil temperature associated with climate change has introduced considerable challenges to crop production.Split nitrogen application(SN)represents a potential strategy for improving crop nitrogen use e...The increase in soil temperature associated with climate change has introduced considerable challenges to crop production.Split nitrogen application(SN)represents a potential strategy for improving crop nitrogen use efficiency and enhancing crop stress resistance.Nevertheless,the precise interaction between soil warming(SW)and SN remains unclear.In order to ascertain the impact of SW on maize growth and whether SN can improve the tolerance of maize to SW,a two-year field experiment was conducted(2022-2023).The aim was to examine the influence of two SW ranges(MT,warming 1.40℃;HT,warming 2.75℃)and two nitrogen application methods(N1,one-time basal application of nitrogen fertilizer;N2,one third of base nitrogen fertilizer+two thirds of jointing stage supplemental nitrogen fertilizer)on maize root growth,photosynthetic characteristics,nitrogen use efficiency,and yield.The results demonstrated that SW impeded root growth and precipitated the premature aging of maize leaves following anthesis,particularly in the HT,which led to a notable reduction in maize yield.In comparison to N1,SN has been shown to increase root length density by 8.54%,root bleeding rate by 8.57%,and enhance root distribution ratio in the middle soil layers(20-60 cm).The interaction between SW and SN had a notable impact on maize growth and yield.The SN improved the absorption and utilization efficiency of nitrogen by promoting root development and downward canopy growth,thus improving the tolerance of maize to SW at the later stage of growth.In particular,the N2HT resulted in a 14.51%increase in the photosynthetic rate,a 18.58%increase in nitrogen absorption efficiency,and a 18.32%increase in maize yield compared with N1HT.It can be posited that the SN represents a viable nitrogen management measure with the potential to enhance maize tolerance to soil high-temperature stress.展开更多
The high labor demand during rice seedling cultivation and transplantation poses a significant challenge in advancing machine-transplanted rice cultivation.This problem may be solved by increasing the seeding rate dur...The high labor demand during rice seedling cultivation and transplantation poses a significant challenge in advancing machine-transplanted rice cultivation.This problem may be solved by increasing the seeding rate during seedling production while reducing the number of seedling trays.This study conducted field experiments from 2021 to 2022,using transplanting seedling ages of 10 and 15 days to explore the effects of 250,300,and 350 g/tray on the seedling quality,mechanical transplantation quality,yields,and economic benefits of rice.The commonly used combination of 150 g/tray with a 20-day seedling age in rice production was used as CK.The cultivation of seedlings under a high seeding rate and short seedling age significantly affected seedling characteristics,but there was no significant difference in seedling vitality compared to CK.The minimum number of rice trays used in the experiment was observed in the treatment of 350-10(300 g/tray and 10-day seedling age),only 152-155 trays ha^(-1),resulting in a 62%reduction in the number of trays needed.By increasing the seeding rate of rice,missed holes during mechanical transplantation decreased by 2.8 to 4%.The treatment of 300-15(300 g/tray and 15-day seedling age)achieved the highest yields and economic gains.These results indicated that using crop straw boards can reduce the application of seedling trays.On that basis,rice yields can be increased by raising the seeding rate and shortening the seedling age of rice without compromising seedling quality.展开更多
Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects s...Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects such as porosity issues, significant deformation, surface cracks, and challenging control of surface morphology encountered during the selective laser melting(SLM) additive manufacturing(AM) process of specialized Micro Electromechanical System(MEMS) components, multiparameter optimization and micro powder melt pool/macro-scale mechanical properties control simulation of specialized components are conducted. The optimal parameters obtained through highprecision preparation and machining of components and static/high dynamic verification are: laser power of 110 W, laser speed of 600 mm/s, laser diameter of 75 μm, and scanning spacing of 50 μm. The density of the subordinate components under this reference can reach 99.15%, the surface hardness can reach 51.9 HRA, the yield strength can reach 550 MPa, the maximum machining error of the components is 4.73%, and the average surface roughness is 0.45 μm. Through dynamic hammering and high dynamic firing verification, SLM components meet the requirements for overload resistance. The results have proven that MEM technology can provide a new means for the processing of MEMS components applied in high dynamic environments. The parameters obtained in the conclusion can provide a design basis for the additive preparation of MEMS components.展开更多
In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology bas...In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology based on the principle of high-throughput sequencing,and established a multi-locus 10 animalderived components identification method of cattle,goat,sheep,donkey,horse,chicken,duck,goose,pigeon,quail in meat and meat products.The specific loci of each species could be detected and the species could be accurately identified,including 5 loci for cattle and duck,3 loci for sheep,9 loci for chicken and horse,10 loci for goose and pigeon,6 loci for quail and 1 locus for donkey and goat,and an adulteration model was established to simulate commercially available samples.The results showed that the method established in this study had high throughput,good repeatability and accuracy,and was able to identify 10 animalderived components simultaneously with 100%repeatability accuracy.The detection limit was 0.1%(m/m)in simulated samples of chicken,duck and horse.Using the method established in this study to test commercially available samples,4 samples from 14 commercially available samples were detected to be inconsistent with the labels,of which 2 did not contain the target ingredient and 2 were adulterated with small amounts of other ingredients.展开更多
Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC...Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC is a nonlinear system with a lot of overlapping information.In this paper,a dataset of eight roughness statistical parameters covering 112 digital joints is established.Then,the principal component analysis method is introduced to extract the significant information,which solves the information overlap problem of roughness characterization.Based on the two principal components of extracted features,the white shark optimizer algorithm was introduced to optimize the extreme gradient boosting model,and a new machine learning(ML)prediction model was established.The prediction accuracy of the new model and the other 17 models was measured using statistical metrics.The results show that the prediction result of the new model is more consistent with the real JRC value,with higher recognition accuracy and generalization ability.展开更多
The crop yields achieved through traditional plant breeding techniques appear to be nearing a plateau.Therefore,it is essential to accelerate advancements in photosynthesis,the fundamental process by which plants conv...The crop yields achieved through traditional plant breeding techniques appear to be nearing a plateau.Therefore,it is essential to accelerate advancements in photosynthesis,the fundamental process by which plants convert light energy into chemical energy,to further enhance crop yields.Research focused on improving photosynthesis holds significant promise for increasing sustainable agricultural productivity and addressing challenges related to global food security.This review examines the latest advancements and strategies aimed at boosting crop yields by enhancing photosynthetic efficiency.There has been a linear increase in yield over the years in historically released germplasm selected through traditional breeding methods,and this increase is accompanied by improved photosynthesis.We explore various aspects of the light reactions designed to enhance crop yield,including light harvest efficiency through smart canopy systems,expanding the absorbed light spectrum to include far-red light,optimizing non-photochemical quenching,and accelerating electron transport flux.At the same time,we investigate carbon reactions that can enhance crop yield,such as manipulating Rubisco activity,improving the Calvin-Benson-Bassham cycle,introducing CO_(2)concentrating mechanisms in C_(3)plants,and optimizing carbon allocation.These strategies could significantly impact crop yield enhancement and help bridge the yield gap.展开更多
Reducing water consumption in rice production in China without affecting grain yield and quality is a significant challenge.This study explored how various dry cultivation methods could improve rice quality while bala...Reducing water consumption in rice production in China without affecting grain yield and quality is a significant challenge.This study explored how various dry cultivation methods could improve rice quality while balancing yield to maintain sustainable rice production.A japonica upland rice cultivar and a japonica paddy rice cultivar were cultivated in the field with three cultivation methods:plastic film mulching dry cultivation(PFMC),bare dry cultivation(BC),and continuous flooding cultivation(CF)as control.There was no significant difference in upland rice yield between PFMC and BC,nor in paddy rice yield between PFMC and CF.Compared with CF,the two varieties'yields decreased significantly with BC.Dry cultivation,especially PFMC,could decrease the active filling period,chalky rice rate,chalkiness,amylose content,gel consistency,breakdown viscosity,the ratio of glutelin to prolamin,and leaf senescence while increasing water use efficiency,protein components content,setback viscosity,grain starch branching enzyme(Q-enzyme)activity,and average filling rate.Compared with paddy rice,upland rice had a lower yield,shorter active filling period,lower chalkiness grain rate and gel consistency,higher amylose content,breakdown viscosity,protein components content,and average filling rate.Grain Q-enzyme activity and grain-filling parameters were closely related to rice quality.Reasonable dry cultivation methods could balance yield and quality,especially by improving rice's nutritional and appearance quality.展开更多
This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on t...This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated.Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens,but did not produce too large microstructure differences.By comparison,significant texture differences developed owing to the various extrusion die cavities,which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND.Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity.The results from the finite element analysis and the visco-plastic self-consistent model indicated that,in order to accommodate the different strain components induced by the extrusion die cavities,slip systems or tension twinning were activated differently,and this was the critical reason causing the above texture differences.One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress.Additionally,the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation,and the former generally produced the lower yield stress and the increasing stage of strain hardening rate,while the latter produced the higher yield stress and the continuous decline of strain hardening rate.展开更多
Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants h...Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants have some differences in efficacy,but the flower buds are easily confused for similar traits.In addition,large-scale cultivation of ornamental rose flowers may lead to a decrease in the effective components of medicinal roses.Therefore,it is necessary to study the chemical composition and make quality evaluation of Rosae Chinensis Flos(Yueji)and Rosae Rugosae Flos(Meigui).Methods:In this study,40 batches of samples including Meigui and Yueji from different regions in China were collected to establish high-performance liquid chromatography fingerprints.Then,the fingerprints data was analyzed using principal component analysis,hierarchical cluster analysis,and partial least squares discriminant analysis analysis chemometrics to obtain information on intergroup differences,and non-targeted metabolomic techniques were applied to identify and compare chemical compositions of samples which were chosen from groups with large differences.Differential compounds were screened by orthogonal partial least-squares discriminant analysis and S-plot,and finally multi-component quantification was performed to comprehensively evaluate the quality of Yueji and Meigui.Results:The similarity between the fingerprints of 40 batches roses and the reference print R was 0.73 to 0.93,indicating that there were similarities and differences between the samples.Through principal component analysis and hierarchical cluster analysis of fingerprints data,the samples from different origins and varieties were intuitively divided into four groups.Partial least-squares discriminant analysis analysis showed that Meigui and Yueji cluster into two categories and the model was reliable.A total of 89 compounds were identified by high resolution mass spectrometry,mainly were flavonoids and flavonoid glycosides,as well as phenolic acids.Eight differential components were screened out by orthogonal partial least-squares discriminant analysis and S-plot analysis.Quantitative analyses of the eight compounds,including gallic acid,ellagic acid,hyperoside,isoquercitrin,etc.,showed that Yueji was generally richer in phenolic acids and flavonoids than Meigui,and the quality of Yueji from Shandong and Hebei was better.It is worth noting that Xinjiang rose is rich in various components,which is worth focusing on more in-depth research.Conclusion:In this study,the fingerprints of Meigui and Yueji were established.The chemical components information of roses was further improved based on non-targeted metabolomics and mass spectrometry technology.At the same time,eight differential components of Meigui and Yueji were screened out and quantitatively analyzed.The research results provided a scientific basis for the quality control and rational development and utilization of Rosae Chinensis Flos and Rosae Rugosae Flos,and also laid a foundation for the study of their pharmacodynamic material basis.展开更多
Sorghum is an important cereal crop for smallholder farmers’ food security in many countries in West Africa. However, its production has stagnated due to several factors, such as anthracnose and grain molds. Thus, a ...Sorghum is an important cereal crop for smallholder farmers’ food security in many countries in West Africa. However, its production has stagnated due to several factors, such as anthracnose and grain molds. Thus, a study was conducted to identify local germplasms that combine high grain yield and resistance to anthracnose and grain molds under Senegalese environments. A set of 256 genotypes was assessed at Sefa, Sinthiou and Kolda research stations using an incomplete blocks design with two replications. Agro-morphological and phytopathological data were collected. The results revealed a huge phenotypic variation between the genotypes for all traits. The flowering time varied from 43 to 126 days after sowing, while the panicle length varied from 10 to 60 cm. The genotypes were generally more productive at Sinthiou (1653 Kg ha−1) compared to Kolda (164 kg ha−1) research stations. The disease parameters were significantly and positively associated, while the flowering time was strongly and positively associated to grain mold score. The genotypes were classified into three groups with plant height, panicle diameter and length, flowering time and grain mold score as the most discriminating parameters. The genotypes belonging to cluster 3, in addition of being more productive and more resistant to grain mold and anthracnose, have longer panicles. These genotypes present promising prospects for inclusion in breeding programs focused on advancing sorghum yield and disease resistance in Senegal.展开更多
文摘Context:In irrigated agriculture,the salt stress is a major problem due to accumulation of salt from the irrigation water in the soil layers.Objectives:The aim of this study is to determinate the effect of salinity on some agromorphological traits and seed nutritional quality of three sesames(Sesamum indicum L.)varieties.Methodology:This is how four solutions of different NaCl concentrations from 0,60,120 to 240 mM were used to water sesame plants at the five-leaves stage and this for two months in completely randomized device with four repetitions.Results:The results show a negative effect of the salinity growth and yield parameters,mineral elements,ascorbic acid(to 21.4% in White cultivar,28% in Brown and 24.2% in Black cultivar from 0 to 240 mM NaCl),oil(to 22.6%in White cultivar,32% in Brown and 25.5% in Black cultivar from 0 to 240 mM NaCl)and accumulation of Na(Sodium)content(to 11.8% in White cultivar,15.3% in Brown and 12.2% in Black cultivar from 0 to 240 mM NaCl),osmolytes as proteins(to 14.5% in White cultivar,11.5% in Brown and 9.6%in Black cultivar from 0 to 240 mM NaCl)and antioxydants components.Varieties White and Brown were less affected by salinity.Conclusion:White variety exhibited higher adaptive potential under salinity stress when compared to Brown variety(rich in fiber)and closely followed by Black variety.Thus White variety could be recommended for consumer oil,minerals and proteins.As for Black variety,it could be used,as glucid and antioxydants additives in food.
基金supported by the National Natural Science Foundation of China(32161143006,32171997)the Earmarked Fund for CARS-13,and the Agricultural Science and Technology Innovation Program of Chinese Academy of Agricultural Sciences(No.CAAS-ASTIP-2021-OCRI).
文摘Bacterial wilt(BW)caused by Ralstonia solanacearum is a wide-spread and serious disease in peanut.To date,this soilborne disease could only be effectively controlled by planting resistant peanut cultivars.However,the relatively lower yield potential of the available BW-resistant peanut cultivars is a key reason restricting productivity in most epidemic regions naturally infested with the pathogen.Even small pods or seeds and low number per plant has been regarded as the key factor for the low yield potential both in BW-resistant peanut germplasm lines and available released cultivars,whether the resistance is closely linked with key yield components remains unclear.In this study,the relationship between pod weight and BW resistance was analyzed by using a recombinant inbred lines(RIL)population derived from a crossing combination between a high yielding cultivar Xuhua 13 and a BW-resistant cultivar Zhonghua 6.From the experiments,it was found that the BW resistance was not significantly correlated with pod number per plant(PNP),hundred pod weight(HPW)and pod weight per plant(PWP)in the RIL population.Based on linkage analysis,the quantitative trait locus(QTL)s related to PNP were identified on A06,A07,A08 and B03.The QTLs for HPW were detected on A05 and A07,and the QTLs for PWP were on A06,A07 and B03.However,the QTL for BW resistance identified on B02.These results indicated that the BW resistance and the pod number per plant as well as pod weight were inherited independently.Two recombined lines(QT0944 and QT1028)with high level BW resistance and large pods(hundred pod weight over 185g)were identified from the RILs,and they possessed the favored alleles of identified QTLs from both parents,which could be used in peanut breeding for high yield and high level disease resistance.
基金supported by the Science and Technology Key Research&Development Project of Shaanxi Province(2022NY-178)the Technical System of Minor Cereals Industry in Shaanxi Province(NYKJ-2022-YL(XN)28)the Special Fund for Seed Industrial Development in Shaanxi Province(K3031223130).
文摘Herbicide safeners alleviate herbicide toxicity while preserving weed-control efficacy in common buckwheat.A three-year field experiment was performed to measure the effects of quizalofop-P-ethyl(QPE)alone or in combination with gibberellin or brassinolide on soil enzyme activity and yield components in common buckwheat.The herbicide-brassinolide application yielded the greatest increases in soil enzyme activity and yield components without sacrificing weed control efficacy.It is recommended for use in common buckwheat cultivation in the Loess Plateau.
文摘In Kansas, productivity of grain sorghum [Sorghum bicolor (L.) Moench] is affected by weather conditions at planting and during pollination. Planting date management and selection of hybrid maturity group can help to avoid severe environmental stresses during these sensitive stages. The hypothesis of the study was that late May planting improves grain sorghum yield and yield components compared with late June planting. The objectives of this research were to investigate the influence of planting dates yield and yield components of different grain sorghum hybrids, and to determine the optimal planting date and hybrid combination for maximum biomass and grains production. Three sorghum hybrids (early, medium, and late maturing) were planted in late May and late June without irrigation in Kansas at Manhattan/Ashland Bottom Research Station, and Hutchinson in 2010;and at Manhattan/North Farm and Hutchinson in 2011. Data on dry matter production, yield and yield components were collected. Grain yield and yield components were influenced by planting date depending on environmental conditions. At Manhattan (2010), greater grain yield, number of heads per plant, were obtained with late-June planting compared with late May planting, while at Hutchinson (2010) greater yield was obtained with late May planting for all hybrids. The yield component most affected at Hutchinson was the number of kernels∙panicle<sup>−1</sup> and plant density. Late-May planting was favorable for late maturing hybrid (P84G62) in all locations. However, the yield of early maturing hybrid (DKS 28-05) and medium maturing hybrid (DKS 37-07) was less affected by delayed planting. The effects of planting dates on yield and yield components of grain sorghum hybrids were found to be variable among hybrid maturity groups and locations.
基金supported by the National Natural Science Foundation of China(42177341)the Natural Science Basic Research Program of Shanxi,China(202203021222138).
文摘Organic material combined with inorganic fertilizer has been shown to greatly improve crop yield and maintain soil fertility globally. However, it remains unclear if crop yield and soil fertility can be sustained in the long term under the combined application of organic and inorganic fertilizers. Three long-term field trials were conducted to investigate the effects of organic amendments on the grain sustainable yield index(SYI), soil fertility index(SFI)and nutrient balance in maize–wheat cropping systems of central and southern China during 1991–2019. Five treatments were included in the trials: 1) no fertilization(control);2) balanced mineral fertilization(NPK);3) NPK plus manure(NPKM);4) high dose of NPK plus manure(1.5NPKM);and 5) NPK plus crop straw(NPKS). Over time, the grain yields of wheat and maize showed an increasing trend in all four fertilization treatments at the Yangling(YL) and Zhengzhou(ZZ) locations, while they declined at Qiyang(QY). The grain yield in the NPKM and 1.5NPKM treatments gradually exceeded that of the NPK and NPKS treatments at the QY site. The largest SYI was recorded in the NPKM treatment across the three sites, suggesting that inorganic fertilizer combined with manure can effectively improve crop yield sustainability. Higher SYI values were recorded at the YL and ZZ sites than at the QY site, possibly because the soil was more acid at QY. The key factors affecting grain yield were soil available phosphorus(AP) and available potassium(AK) at the YL and ZZ sites, and pH and AP at the QY site.All fertilization treatments resulted in soil N and P surpluses at the three sites, but soil K surpluses were recorded only at the QY site. The SFI was greater in the 1.5NPKM, NPKM and NPKS treatments than in the NPK treatment by 13.3–40.0 and 16.4–63.6% at the YL and ZZ sites, respectively, and was significantly higher in the NPKM and 1.5NPKM treatments than in the NPK and NPKS treatments at the QY site. A significant, positive linear relationship was found between SFI and crop yield, and SYI and nutrient balance, indicating that grain yield and its sustainability significantly increased with increasing soil fertility. The apparent N, P and K balances positively affected SFI.This study suggests that the appropriate amount of manure mixed with mineral NPK fertilizer is beneficial to the development of sustainable agriculture, which effectively increases the crop yield and yield sustainability by improving soil fertility.
基金supported by the Biological Breeding-National Science and Technology Major Project(2023ZD0403305)National Natural Science Foundation of China(32101845)+1 种基金the National Key Research and Development Program of China(2023YFE0105000)the China Agriculture Research System(CARS-04).
文摘Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop morphological development and increase yield.Here,a three-year study was performed to verify the feasibility of adjusting row spacing to further enhance yield in densely planted soybeans.Of three row-spacing configurations(40-40,20-40,and 20-60 cm)and two planting densities(normal 180,000 plants ha 1 and high 270,000 plants ha 1).The differences in canopy structure,plant morphological development,photosynthetic capacity and their impact on yield were analyzed.Row spacing configurations have a significant effect on canopy transmittance(CT).The 20-60 cm row spacing configuration increased CT and creates a favorable canopy light environment,in which plant height is reduced,while branching is promoted.This approach reduces plant competition,optimizes the developments of leaf area per plant,specific leaf area,leaf area development rate,leaf area duration and photosynthetic physiological indices(F_(v)/F_(m),ETR,P_(n)).The significant increase of 11.9%-34.2%in canopy apparent photosynthesis(CAP)is attributed to the significant optimization of plant growth and photosynthetic physiology through CT,an important contributing factor to yield increases.The yield in the 20-60 cm treatment is 4.0%higher than in equidistant planting under normal planting density,but 5.9%under high density,primarily driven by CAP and pod number.These findings suggest that suitable row spacing configurations optimize the light environment for plants,promote source-sink transformation in soybeans,and further improve yield.In practice,a 20-60 cm row spacing configuration could be employed for high-density soybean planting to achieve a more substantial yield gain.
基金funded by the Key Research and Development Project of Xinjiang Uygur Autonomous Region(2023A02002-2)the National Key Research and Development Program of China(2023YFD1901503)the Central Guidance Fund for Local Science and Technology Development of Xinjiang Uygur Autonomous Region(ZYYD2024CG03)。
文摘Biochar and animal manure application can improve crop yields in salt-affected soil.Previous studies have primarily applied biochar and animal manure either alone or at fixed ratios,while their combined effects with varying combination proportions are still unclear.To address this knowledge gap,we performed a 2-a experiment(2023-2024)in a salinized cotton field in Wensu County of Xinjiang Uygur Autonomous Region of China with the following 6 treatments:control;application of biochar(10t/hm^(2))alone(BC100%);application of cow manure(10 t/hm^(2))alone(CM100%);application of 70%biochar(7 t/hm^(2))combined with 30%cow manure(3 t/hm^(2))(BC70%+CM30%);application of 50%biochar(5 t/hm^(2))combined with 50%cow manure(5 t/hm^(2))(BC50%+CM50%);and application of 30%biochar(3 t/hm^(2))combined with 70%cow manure(7 t/hm^(2))(BC30%+CM70%).By measuring soil pH,electrical conductivity,soil organic matter,available phosphorus,available potassium,and available nitrogen at 0-20 and 20-40 cm depths,as well as yield components and cotton yield in 2023 and 2024,this study revealed that soil nutrients in the 0-20 cm depth were more sensitive to the treatment.Among all the treatments,BC50%+CM50%treatment had the highest value of soil pH(9.63±0.07)but the lowest values of electrical conductivity(161.9±31.8μS/cm),soil organic matter(1.88±0.27 g/kg),and available potassium(42.72±8.25 mg/kg)in 2024.Moreover,the highest cotton yield(5336.63±467.72 kg/hm^(2))was also observed under BC50%+CM50%treatment in 2024,which was 1.9 times greater than that under the control treatment.In addition,cotton yield in 2023 was jointly determined by yield components(density and number of cotton bolls)and soil nutrients(available phosphorus and available potassium),but in 2024,cotton yield was only positively related to yield components(density,number of cotton bolls,and single boll weight).Overall,this study highlighted that in salt-affected soil,the combination of biochar and cow manure at a 1:1 ratio is recommended for increasing cotton yield and reducing soil salinity stress.
基金supported by the National Natural Science Foundation of China(32172125 and U21A20218)。
文摘Diversifying crop rotation aims to balance production and ecological concerns.However,yield and water use efficiency(WUE)of crop in diversified rotation systems have not been well documented,especially under limited irrigation.Here,we conducted a 6-year experiment with five treatments:1)wheatmaize cropping system(WM),as control;2)WMME,spring maize→WM rotation;3)WMML,spring millet→WM rotation;4)WMMP,spring peanut→WM rotation;and 5)WMMS,spring soybean→WM rotation,to explore how diversified rotations affected yield and WUE of wheat.Results showed that approximately 60% higher precipitation during wheat growing season in Cycle 1(2015-2017)resulted in yield increases by 33.8%-55.7% compared to those in Cycle 2(2017-2019)and Cycle3(2019-2021).Grain yield and WUE of wheat were 16.7% and 9.6% higher in Cycle 1,81.5% and 86.8% higher in Cycle 2,and 56.1% and 78.7% higher in Cycle 3 on average in diversified rotations compared to those in WM,respectively.Further analysis revealed that spike number and aboveground biomass were the main contributors to the increments,which can be explained by the increased evapotranspiration during the middle-late wheat growth stages(e.g.,regreening,jointing,and anthesis)in diversified rotations.In general,diversified rotations enhanced synchronization of soil water supply with crop water demand by affecting the spatiotemporal dynamics of soil moisture under varied precipitation conditions,thereby increasing yield and WUE of wheat.Hence,diversified spring crops→WM rotations offer a sustainable and efficient strategy for enhancing wheat production and water conservation in dry areas.
基金supported by the National Natural Science Foundation of China(No.32071980)the Key Projects of Shaanxi Agricultural Collaborative Innovation and Extension Alliance(No.LMZD202201)+1 种基金the Key R&D Project in Shaanxi Province(No.2021LLRH-07)Shaanxi Natural Scientific Basic Research Program project(No.2022JQ-157).
文摘Agricultural practices significantly contribute to greenhouse gas(GHG)emissions,necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production.Plastic film mulching is commonly used in the Loess Plateau region.Incorporating slow-release fertilizers as a replacement for urea within this practice can reduce nitrogen losses and enhance crop productivity.Combining these techniques represents a novel agricultural approach in semi-arid areas.However,the impact of this integration on soil carbon storage(SOCS),carbon footprint(CF),and economic benefits has received limited research attention.Therefore,we conducted an eight-year study(2015-2022)in the semi-arid northwestern region to quantify the effects of four treatments[urea supplied without plastic film mulching(CK-U),slow-release fertilizer supplied without plastic film mulching(CK-S),urea supplied with plastic film mulching(PM-U),and slow-release fertilizer supplied with plastic film mulching(PM-S)]on soil fertility,economic and environmental benefits.The results revealed that nitrogen fertilizer was the primary contributor to total GHG emissions(≥71.97%).Compared to other treatments,PM-S increased average grain yield by 12.01%-37.89%,water use efficiency by 9.19%-23.33%,nitrogen accumulation by 27.07%-66.19%,and net return by 6.21%-29.57%.Furthermore,PM-S decreased CF by 12.87%-44.31%and CF per net return by 14.25%-41.16%.After eight years,PM-S increased SOCS(0-40 cm)by 2.46%,while PM-U decreased it by 7.09%.These findings highlight the positive effects of PM-S on surface soil fertility,economic gains,and environmental benefits in spring maize production on the Loess Plateau,underscoring its potential for widespread adoption and application.
基金funding from the Scientific Research Program of the Higher Educational Institutions in Anhui Province, China (2023AH050986)the Natural Science Foundation of Anhui Province, China (240805MC063)+1 种基金the National Natural Science Foundation of China (32172119)the Talent Introduction Project of Anhui Agricultural University, China (rc312212 and yj2019-01)。
文摘Increasing the grain yield(GY) and water use efficiency(WUE) of winter wheat in the Huaibei Plain(HP), China are essential. However, the effects of micro-sprinkler irrigation and topsoil compaction after wheat seed sowing on the GY and WUE are unclear. Therefore, a two-year field experiment was conducted during the 2021–2023 winter wheat growing seasons with a total six treatments: rain-fed(RF), conventional irrigation(CI) and micro-sprinkler irrigation(MI), as well as topsoil compaction after seed sowing under these three irrigation methods(RFC, CIC, and MIC). The results in the two years indicated that MI significantly increased GY compared to CI and RF, by averages of 17.9 and 42.1%, respectively. The increase in GY of MI was due to its significant increases in the number of spikes, kernels per spike, and grain weight. The chlorophyll concentration in flag leaves of MI after the anthesis stage maintained higher levels than with CI and RF, and was the lowest in RF. This was due to the dramatically enhanced catalase and peroxidase activities and lower malondialdehyde content under MI. Compared with RF and CI, MI significantly promoted dry matter remobilization and production after anthesis, as well as its contribution to GY. In addition, MI significantly boosted root growth, and root activity during the grain-filling stage was remarkably enhanced compared to CI and RF. In 2021–2022, there was no significant difference in WUE between MI and RF, but the WUE of RF was significantly lower than that of MI in 2022–2023. However, the WUE in MI was significantly improved compared to CI, and it increased by averages of 15.1 and 17.6% for the two years. Topsoil compaction significantly increased GY and WUE under rain-fed conditions due to improved spike numbers and dry matter production. Overall, topsoil compaction is advisable for enhancing GY and WUE in rain-fed conditions, whereas micro-sprinkler irrigation can be adopted to simultaneously achieve high GY and WUE in the HP.
基金supported by the Natural Science Fund of China(31771724)the Key Research and Development Project of Shaanxi Province(2024NC-ZDCYL-01-10).
文摘The increase in soil temperature associated with climate change has introduced considerable challenges to crop production.Split nitrogen application(SN)represents a potential strategy for improving crop nitrogen use efficiency and enhancing crop stress resistance.Nevertheless,the precise interaction between soil warming(SW)and SN remains unclear.In order to ascertain the impact of SW on maize growth and whether SN can improve the tolerance of maize to SW,a two-year field experiment was conducted(2022-2023).The aim was to examine the influence of two SW ranges(MT,warming 1.40℃;HT,warming 2.75℃)and two nitrogen application methods(N1,one-time basal application of nitrogen fertilizer;N2,one third of base nitrogen fertilizer+two thirds of jointing stage supplemental nitrogen fertilizer)on maize root growth,photosynthetic characteristics,nitrogen use efficiency,and yield.The results demonstrated that SW impeded root growth and precipitated the premature aging of maize leaves following anthesis,particularly in the HT,which led to a notable reduction in maize yield.In comparison to N1,SN has been shown to increase root length density by 8.54%,root bleeding rate by 8.57%,and enhance root distribution ratio in the middle soil layers(20-60 cm).The interaction between SW and SN had a notable impact on maize growth and yield.The SN improved the absorption and utilization efficiency of nitrogen by promoting root development and downward canopy growth,thus improving the tolerance of maize to SW at the later stage of growth.In particular,the N2HT resulted in a 14.51%increase in the photosynthetic rate,a 18.58%increase in nitrogen absorption efficiency,and a 18.32%increase in maize yield compared with N1HT.It can be posited that the SN represents a viable nitrogen management measure with the potential to enhance maize tolerance to soil high-temperature stress.
基金funded by the Jiangsu Key Research Program,China(BE2022338)the Jiangsu Agricultural Science and Technology Innovation Fund,China(CX(23)3107)+3 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions,China(22KJB210004)the Jiangsu Province Agricultural Major Technology Collaborative Promotion Project,China(2022-ZYXT-04-1)the Postgraduate Research&Practice Innovation Program of Jiangsu Province,China(KYCX23_3569)the Priority Academic Program Development of Jiangsu Higher Education Institutions,China.
文摘The high labor demand during rice seedling cultivation and transplantation poses a significant challenge in advancing machine-transplanted rice cultivation.This problem may be solved by increasing the seeding rate during seedling production while reducing the number of seedling trays.This study conducted field experiments from 2021 to 2022,using transplanting seedling ages of 10 and 15 days to explore the effects of 250,300,and 350 g/tray on the seedling quality,mechanical transplantation quality,yields,and economic benefits of rice.The commonly used combination of 150 g/tray with a 20-day seedling age in rice production was used as CK.The cultivation of seedlings under a high seeding rate and short seedling age significantly affected seedling characteristics,but there was no significant difference in seedling vitality compared to CK.The minimum number of rice trays used in the experiment was observed in the treatment of 350-10(300 g/tray and 10-day seedling age),only 152-155 trays ha^(-1),resulting in a 62%reduction in the number of trays needed.By increasing the seeding rate of rice,missed holes during mechanical transplantation decreased by 2.8 to 4%.The treatment of 300-15(300 g/tray and 15-day seedling age)achieved the highest yields and economic gains.These results indicated that using crop straw boards can reduce the application of seedling trays.On that basis,rice yields can be increased by raising the seeding rate and shortening the seedling age of rice without compromising seedling quality.
基金funded by the National Natural Science Foundation of China Youth Fund(Grant No.62304022)Science and Technology on Electromechanical Dynamic Control Laboratory(China,Grant No.6142601012304)the 2022e2024 China Association for Science and Technology Innovation Integration Association Youth Talent Support Project(Grant No.2022QNRC001).
文摘Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects such as porosity issues, significant deformation, surface cracks, and challenging control of surface morphology encountered during the selective laser melting(SLM) additive manufacturing(AM) process of specialized Micro Electromechanical System(MEMS) components, multiparameter optimization and micro powder melt pool/macro-scale mechanical properties control simulation of specialized components are conducted. The optimal parameters obtained through highprecision preparation and machining of components and static/high dynamic verification are: laser power of 110 W, laser speed of 600 mm/s, laser diameter of 75 μm, and scanning spacing of 50 μm. The density of the subordinate components under this reference can reach 99.15%, the surface hardness can reach 51.9 HRA, the yield strength can reach 550 MPa, the maximum machining error of the components is 4.73%, and the average surface roughness is 0.45 μm. Through dynamic hammering and high dynamic firing verification, SLM components meet the requirements for overload resistance. The results have proven that MEM technology can provide a new means for the processing of MEMS components applied in high dynamic environments. The parameters obtained in the conclusion can provide a design basis for the additive preparation of MEMS components.
基金financially supported by National Key R&D Program(2021YFF0701905)。
文摘In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology based on the principle of high-throughput sequencing,and established a multi-locus 10 animalderived components identification method of cattle,goat,sheep,donkey,horse,chicken,duck,goose,pigeon,quail in meat and meat products.The specific loci of each species could be detected and the species could be accurately identified,including 5 loci for cattle and duck,3 loci for sheep,9 loci for chicken and horse,10 loci for goose and pigeon,6 loci for quail and 1 locus for donkey and goat,and an adulteration model was established to simulate commercially available samples.The results showed that the method established in this study had high throughput,good repeatability and accuracy,and was able to identify 10 animalderived components simultaneously with 100%repeatability accuracy.The detection limit was 0.1%(m/m)in simulated samples of chicken,duck and horse.Using the method established in this study to test commercially available samples,4 samples from 14 commercially available samples were detected to be inconsistent with the labels,of which 2 did not contain the target ingredient and 2 were adulterated with small amounts of other ingredients.
基金funding from the National Natural Science Foundation of China (Grant No.42277175)the pilot project of cooperation between the Ministry of Natural Resources and Hunan Province“Research and demonstration of key technologies for comprehensive remote sensing identification of geological hazards in typical regions of Hunan Province” (Grant No.2023ZRBSHZ056)the National Key Research and Development Program of China-2023 Key Special Project (Grant No.2023YFC2907400).
文摘Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC is a nonlinear system with a lot of overlapping information.In this paper,a dataset of eight roughness statistical parameters covering 112 digital joints is established.Then,the principal component analysis method is introduced to extract the significant information,which solves the information overlap problem of roughness characterization.Based on the two principal components of extracted features,the white shark optimizer algorithm was introduced to optimize the extreme gradient boosting model,and a new machine learning(ML)prediction model was established.The prediction accuracy of the new model and the other 17 models was measured using statistical metrics.The results show that the prediction result of the new model is more consistent with the real JRC value,with higher recognition accuracy and generalization ability.
基金funded by CAS Project for Young Scientists in Basic Research(YSBR-072-8)National Key Research and Development Program of China(2021YFF1000203 and 2022YFF1001704)。
文摘The crop yields achieved through traditional plant breeding techniques appear to be nearing a plateau.Therefore,it is essential to accelerate advancements in photosynthesis,the fundamental process by which plants convert light energy into chemical energy,to further enhance crop yields.Research focused on improving photosynthesis holds significant promise for increasing sustainable agricultural productivity and addressing challenges related to global food security.This review examines the latest advancements and strategies aimed at boosting crop yields by enhancing photosynthetic efficiency.There has been a linear increase in yield over the years in historically released germplasm selected through traditional breeding methods,and this increase is accompanied by improved photosynthesis.We explore various aspects of the light reactions designed to enhance crop yield,including light harvest efficiency through smart canopy systems,expanding the absorbed light spectrum to include far-red light,optimizing non-photochemical quenching,and accelerating electron transport flux.At the same time,we investigate carbon reactions that can enhance crop yield,such as manipulating Rubisco activity,improving the Calvin-Benson-Bassham cycle,introducing CO_(2)concentrating mechanisms in C_(3)plants,and optimizing carbon allocation.These strategies could significantly impact crop yield enhancement and help bridge the yield gap.
基金he National Key Research and Development Program of China(2022YFD2300304)the National Natural Science Foundation of China(31671617)a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD),China。
文摘Reducing water consumption in rice production in China without affecting grain yield and quality is a significant challenge.This study explored how various dry cultivation methods could improve rice quality while balancing yield to maintain sustainable rice production.A japonica upland rice cultivar and a japonica paddy rice cultivar were cultivated in the field with three cultivation methods:plastic film mulching dry cultivation(PFMC),bare dry cultivation(BC),and continuous flooding cultivation(CF)as control.There was no significant difference in upland rice yield between PFMC and BC,nor in paddy rice yield between PFMC and CF.Compared with CF,the two varieties'yields decreased significantly with BC.Dry cultivation,especially PFMC,could decrease the active filling period,chalky rice rate,chalkiness,amylose content,gel consistency,breakdown viscosity,the ratio of glutelin to prolamin,and leaf senescence while increasing water use efficiency,protein components content,setback viscosity,grain starch branching enzyme(Q-enzyme)activity,and average filling rate.Compared with paddy rice,upland rice had a lower yield,shorter active filling period,lower chalkiness grain rate and gel consistency,higher amylose content,breakdown viscosity,protein components content,and average filling rate.Grain Q-enzyme activity and grain-filling parameters were closely related to rice quality.Reasonable dry cultivation methods could balance yield and quality,especially by improving rice's nutritional and appearance quality.
基金supported by National Natural Science Foundation of China(Grant No.52205344,51925401)Postdoctoral Research Foundation of China(Grant No.2023M732398)+1 种基金National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact(Grant No.WDZC2023-1)Key Research and Development Program of Shandong Province(Grant No.2023CXPT066).
文摘This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated.Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens,but did not produce too large microstructure differences.By comparison,significant texture differences developed owing to the various extrusion die cavities,which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND.Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity.The results from the finite element analysis and the visco-plastic self-consistent model indicated that,in order to accommodate the different strain components induced by the extrusion die cavities,slip systems or tension twinning were activated differently,and this was the critical reason causing the above texture differences.One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress.Additionally,the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation,and the former generally produced the lower yield stress and the increasing stage of strain hardening rate,while the latter produced the higher yield stress and the continuous decline of strain hardening rate.
基金supported by the key project at the central government level:The ability establishment of sustainable use for valuable Chinese medicine resources(Grant number 2060302)the National Natural Science Foundation of China(Grant number 82373982,82173929).
文摘Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants have some differences in efficacy,but the flower buds are easily confused for similar traits.In addition,large-scale cultivation of ornamental rose flowers may lead to a decrease in the effective components of medicinal roses.Therefore,it is necessary to study the chemical composition and make quality evaluation of Rosae Chinensis Flos(Yueji)and Rosae Rugosae Flos(Meigui).Methods:In this study,40 batches of samples including Meigui and Yueji from different regions in China were collected to establish high-performance liquid chromatography fingerprints.Then,the fingerprints data was analyzed using principal component analysis,hierarchical cluster analysis,and partial least squares discriminant analysis analysis chemometrics to obtain information on intergroup differences,and non-targeted metabolomic techniques were applied to identify and compare chemical compositions of samples which were chosen from groups with large differences.Differential compounds were screened by orthogonal partial least-squares discriminant analysis and S-plot,and finally multi-component quantification was performed to comprehensively evaluate the quality of Yueji and Meigui.Results:The similarity between the fingerprints of 40 batches roses and the reference print R was 0.73 to 0.93,indicating that there were similarities and differences between the samples.Through principal component analysis and hierarchical cluster analysis of fingerprints data,the samples from different origins and varieties were intuitively divided into four groups.Partial least-squares discriminant analysis analysis showed that Meigui and Yueji cluster into two categories and the model was reliable.A total of 89 compounds were identified by high resolution mass spectrometry,mainly were flavonoids and flavonoid glycosides,as well as phenolic acids.Eight differential components were screened out by orthogonal partial least-squares discriminant analysis and S-plot analysis.Quantitative analyses of the eight compounds,including gallic acid,ellagic acid,hyperoside,isoquercitrin,etc.,showed that Yueji was generally richer in phenolic acids and flavonoids than Meigui,and the quality of Yueji from Shandong and Hebei was better.It is worth noting that Xinjiang rose is rich in various components,which is worth focusing on more in-depth research.Conclusion:In this study,the fingerprints of Meigui and Yueji were established.The chemical components information of roses was further improved based on non-targeted metabolomics and mass spectrometry technology.At the same time,eight differential components of Meigui and Yueji were screened out and quantitatively analyzed.The research results provided a scientific basis for the quality control and rational development and utilization of Rosae Chinensis Flos and Rosae Rugosae Flos,and also laid a foundation for the study of their pharmacodynamic material basis.
文摘Sorghum is an important cereal crop for smallholder farmers’ food security in many countries in West Africa. However, its production has stagnated due to several factors, such as anthracnose and grain molds. Thus, a study was conducted to identify local germplasms that combine high grain yield and resistance to anthracnose and grain molds under Senegalese environments. A set of 256 genotypes was assessed at Sefa, Sinthiou and Kolda research stations using an incomplete blocks design with two replications. Agro-morphological and phytopathological data were collected. The results revealed a huge phenotypic variation between the genotypes for all traits. The flowering time varied from 43 to 126 days after sowing, while the panicle length varied from 10 to 60 cm. The genotypes were generally more productive at Sinthiou (1653 Kg ha−1) compared to Kolda (164 kg ha−1) research stations. The disease parameters were significantly and positively associated, while the flowering time was strongly and positively associated to grain mold score. The genotypes were classified into three groups with plant height, panicle diameter and length, flowering time and grain mold score as the most discriminating parameters. The genotypes belonging to cluster 3, in addition of being more productive and more resistant to grain mold and anthracnose, have longer panicles. These genotypes present promising prospects for inclusion in breeding programs focused on advancing sorghum yield and disease resistance in Senegal.
