Based on the X-ray scattering intensity theory,the correction factors of the degree of crystallinity formulae of the multicomponent polymers have been clearly defined.The formula of degree of erystallinity of the mult...Based on the X-ray scattering intensity theory,the correction factors of the degree of crystallinity formulae of the multicomponent polymers have been clearly defined.The formula of degree of erystallinity of the multicomponent polymers was derived in terms of the WAXD theory ahd improved graphic multipeak resolution methods.The results calculated are compatible with the density measurement.展开更多
The properties of synthetic graphite materials, widely used in advanced fields, are determined by their structure, which is formed in the process of high-temperature (~2500<span style="white-space:normal;"...The properties of synthetic graphite materials, widely used in advanced fields, are determined by their structure, which is formed in the process of high-temperature (~2500<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C) heat treatment. The fine structure of a graphitizing carbon material based on petroleum coke containing 1.3 wt% S at various stages of graphitization was studied by X-ray diffraction analysis. Some of the samples contained the addition of dispersed Fe<sub>2</sub>O<sub>3</sub>. It is shown that the heat-treated material in the range 1200<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C - 2600<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C is heterogeneous, its component composition is determined by the processing temperature and the presence of Fe<sub>2</sub>O<sub>3</sub> additive. The observed dependence of the component composition on the heat treatment temperature suggests that the process of graphitization of the carbon material, apparently, develops through a number of metastable states.展开更多
Cold worked and annealed supersaturated Cu-2.65Ni-0.6Si and Cu-2.35Ni-0.6Si-0.6Cr alloys were studied. The microstructural parameters evolution, including crystallite size, root mean square strain and dislocation dens...Cold worked and annealed supersaturated Cu-2.65Ni-0.6Si and Cu-2.35Ni-0.6Si-0.6Cr alloys were studied. The microstructural parameters evolution, including crystallite size, root mean square strain and dislocation density was analyzed using Materials Analysis Using Diffraction software （MAUD）. The parameters for both alloys have typical values of cold deformed and subsequently annealed copper based alloy. A net change of the crystallite size, root mean square strain and dislocation density values of the alloys aged at 450 °C for 2.5-3 h seems corresponding to the recovery and recrystallization processes. Addition of Cr as quaternary element did not lead to any drastic changes of post deformation or ageing microstructural parameters and hence of recovery-recrystallization kinetics.展开更多
The understanding of reaction mechanisms of electrode materials is of significant importance for the development of advanced batteries.The LiMn2O4 cathode has a voltage plateau around 2.8 V(vs.Li^+/Li),which can provi...The understanding of reaction mechanisms of electrode materials is of significant importance for the development of advanced batteries.The LiMn2O4 cathode has a voltage plateau around 2.8 V(vs.Li^+/Li),which can provide an additional capacity for Li storage,but it suffers from a severe capacity degradation.In this study,operando X-ray diffraction is carried out to investigate the structural evolutions and degradation mechanisms of LiMn2O4 in different voltage ranges.In the range of 3.0-4.3 V(vs.Li^+/Li),the LiMn2O4 cathode exhibits a low capacity but good cycling stability with cycles up to 100 cycles and the charge/discharge processes are associated with the reversible extraction/insertion of Li^+from/into LixMn2O4(0≤x≤1).In the range of 1.4-4.4 V(vs.Li^+/Li),a capacity higher than 200 mAh/g is achieved,but it rapidly decays during the cycling.The voltage plateau around 2.8 V(vs.Li^+/Li)is related to the transformation of the cubic LiMn2O4 phase to the tetragonal Li2Mn2O4 phase,which leads to the formation of cracks as well as the performance degradation.展开更多
RNA methyltransferase is responsible for transferring methyl and resulting in methylation on the bases or ribose ring of RNA, which existed widely but mostly remains an open question. A recombinant protein PH1948 pred...RNA methyltransferase is responsible for transferring methyl and resulting in methylation on the bases or ribose ring of RNA, which existed widely but mostly remains an open question. A recombinant protein PH1948 predicting RNA methyl- transferase from Pyrococcus horikoshii OT3 has been crystallized. The crystals of selenomethionyl PH1948 belong to space group C2, with unit-cell parameters a=207.0 ?, b=43.1 ?, c=118.2 ?, β=92.1°, and diffract X-rays to 2.2 ? resolution. The VM value was determined to be 2.8 ?3/Da, indicating the presence of four protein molecules in the asymmetric unit.展开更多
Results of researches on plastic deformation of steels were obtained by acoustic emission and X-ray methods.The new numerical-analytical method of the thin structure parameter determination on one diffraction line was...Results of researches on plastic deformation of steels were obtained by acoustic emission and X-ray methods.The new numerical-analytical method of the thin structure parameter determination on one diffraction line was offered.It is supposed that with a growth of the deformation the cubic lattice will be transformed in the orthorhombic lattice.It is shown that changes of a condition of crystal structure of austenitic steel occur in four stages and of carbonaceous steel occur in six stages.Existence of two types of acoustic emission sources in carbonaceous steel and one type of acoustic emission source in austenitic steel was proposed.展开更多
Based on analysis on X-ray diffraction, the metamorphic grade of coal in southeast Qinshui Basin was discussed, and a precise evaluation of coal rank through XRD analysis was made, in addition, the correlation of coal...Based on analysis on X-ray diffraction, the metamorphic grade of coal in southeast Qinshui Basin was discussed, and a precise evaluation of coal rank through XRD analysis was made, in addition, the correlation of coal rank and vitrinite reflectance （Ro） was compared. XRD spectra of coal shows （002）-band and γ-band, and based on fitting calculation and multi-peak separation methods, the values of 2θ002 and 2θγ can be obtained, as well as corresponding intensities I002 and Iγ, consequently the coal rank can be quantized as the ratio of I002 and Iγ, that is coal rank=I002/Iγ. The research shows that the values of θ002 and θγ increase with the metamorphic grade, and a very good linear positive correlation exists between calculated Coal Rank and Ro.展开更多
To study the physical and chemical properties of uranium catalyst by impregnation and calcination us was first obtained uranium catalyst SAPO-U, Nd, Sb, Bi. The method of X-ray structure has been studied of the uraniu...To study the physical and chemical properties of uranium catalyst by impregnation and calcination us was first obtained uranium catalyst SAPO-U, Nd, Sb, Bi. The method of X-ray structure has been studied of the uranium catalyst SAPO-U, Nd, Sb, Bi.展开更多
To study the physical and chemical properties of aluminosilicate microsphere catalyst by impregnation and calcination us was first obtained aluminosilicate microsphere catalyst U, Nd for petrochemical processes. The m...To study the physical and chemical properties of aluminosilicate microsphere catalyst by impregnation and calcination us was first obtained aluminosilicate microsphere catalyst U, Nd for petrochemical processes. The method of X-ray structure has been studied for the microsphere catalyst U, Nd.展开更多
Exodeoxyribonuclease III (EXOIII) acts as a 3’→5’ exonuclease and is homologous to purinic/apyrimidinic (AP) endonuclease (APE), which plays an important role in the base excision repair pathway. To structurally in...Exodeoxyribonuclease III (EXOIII) acts as a 3’→5’ exonuclease and is homologous to purinic/apyrimidinic (AP) endonuclease (APE), which plays an important role in the base excision repair pathway. To structurally investigate the reaction and substrate recognition mechanisms of EXOIII, a crystallographic study of EXOIII from Sulfolobus tokodaii strain 7 was carried out. The purified enzyme was crystallized by using the hanging-drop vapor-diffusion method. The crystals belonged to space group C2, with unit-cell parameters a = 154.2, b = 47.7, c = 92.4 ?, β = 125.8° and diffracted to 1.5 ? resolution.展开更多
Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and ...Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and quantifying these superstructures hinder the optimization of pyrrhotite depression in flotation processes.To address this critical issue,synchrotron X-ray powder diffraction(S-XRPD)with Rietveld refinement was employed to quantify the distribution of superstructures in the feed and flotation concentrates of a copper–gold ore.To elucidate the mechanisms influencing depression,density functional theory(DFT)calculations were conducted to explore the electronic structures and surface reactivity of the pyrrhotite superstructures toward the adsorption of water,oxygen and hydroxyl ions(OH-)as dominant species present in the flotation process.S-XRPD analysis revealed that flotation recovery rates of pyrrhotite followed the order of 4C<6C<5C.DFT calculations indicated that the Fe 3d and S 3p orbital band centers exhibited a similar trend relative to the Fermi level with 4C being the closest.The Fe3d band center suggested that the 4C structure possessed a more reactive surface toward the oxygen reduction reaction,promoting the formation of hydrophilic Fe-OH sites.The S 3p band center order also implied that xanthate on the non-magnetic 5C and 6C surfaces could oxidize to dixanthogen,increasing hydrophobicity and floatability,while 4C formed less hydrophobic metal-xanthate complexes.Adsorption energy and charge transfer analyses of water,hydroxyl ions and molecular oxygen further supported the high reactivity and hydrophilic nature of 4C pyrrhotite.The strong bonding with hydroxyl ions indicated enhanced surface passivation by hydrophilic Fe–OOH complexes,aligning with the experimentally observed flotation order(4C<6C<5C).These findings provide a compelling correlation between experimental flotation results and electronic structure calculations,delivering crucial insights for optimizing flotation processes and improving pyrrhotite depression.This breakthrough opens up new opportunities to enhance the efficiency of flotation processes in the mining industry.展开更多
The detrimental phase transformations of sodium layered transition metal oxides(Na_(x)TMO_(2))during desodiation/sodiation seriously suppress their practical applications for sodium ion batteries(SIBs).Undoubtedly,com...The detrimental phase transformations of sodium layered transition metal oxides(Na_(x)TMO_(2))during desodiation/sodiation seriously suppress their practical applications for sodium ion batteries(SIBs).Undoubtedly,comprehensively investigating of the dynamic crystal structure evolutions of Na_(x)TMO_(2)associating with Na ions extraction/intercalation and then deeply understanding of the relationships between electrochemical performances and phase structures drawing support from advanced characterization techniques are indispensable.In-situ high-energy X-ray diffraction(HEXRD),a powerful technology to distinguish the crystal structure of electrode materials,has been widely used to identify the phase evolutions of Na_(x)TMO_(2)and then profoundly revealed the electrochemical reaction processes.In this review,we begin with the descriptions of synchrotron characterization techniques and then present the advantages of synchrotron X-ray diffraction(XRD)over conventional XRD in detail.The optimizations of structural stability and electrochemical properties for P2-,O3-,and P2/O3-type Na_(x)TMO_(2)cathodes through single/dual-site substitution,high-entropy design,phase composition regulation,and surface engineering are summarized.The dynamic crystal structure evolutions of Na_(x)TMO_(2)polytypes during Na ion extraction/intercalation as well as corresponding structural enhancement mechanisms characterizing by means of HEXRD are concluded.The interior relationships between structure/component of Na_(x)TMO_(2)polytypes and their electrochemical properties are discussed.Finally,we look forward the research directions and issues in the route to improve the electrochemical properties of Na_(x)TMO_(2)cathodes for SIBs in the future and the combined utilizations of multiple characterization techniques.This review will provide significant guidelines for rational designs of high-performance Na_(x)TMO_(2)cathodes.展开更多
β-ray-induced X-ray spectroscopy(BIXS)is a promising technique for tritium analysis that offers several unique advantages,including substantial detection depth,nondestructive testing capabilities,and ease of operatio...β-ray-induced X-ray spectroscopy(BIXS)is a promising technique for tritium analysis that offers several unique advantages,including substantial detection depth,nondestructive testing capabilities,and ease of operation.For thin solid tritium-containing samples with substrates,the currently used BIXS analysis method can measure the tritium depth profile and content when the sample thickness is known.In this study,a backpropagation(BP)neural network algorithm was used to predict the tritium content and thickness of a thin solid tritium-containing sample with substrates and a uniformly distributed tritium profile.A semi-analytical method was used to generate datasets for training and testing the BP neural network.A dataset ofβ-decay X-ray spectra from 420 tritium-containing zirconium models with different known thicknesses and tritium-tozirconium ratios was used as the input data.The corresponding zirconium thicknesses and tritium-to-zirconium ratios served as the output for training and testing the BP neural network.The mean relative errors(MREs)of the zirconium thickness in the training and test datasets were 0.56%and 0.42%,respectively,whereas the MREs of the tritium-to-zirconium ratio were 0.59%and 0.38%,respectively.Furthermore,the trained BP neural network demonstrates excellent predictive capability across various levels of statistical uncertainty.For the experimentalβ-decay X-ray spectra of two tritium-containing samples,the predicted zirconium thicknesses and tritium-to-zirconium ratios showed good agreement with the results obtained through the elastic backscattering spectrometry(EBS).展开更多
Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the specia...Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the speciation of P and the leaching conditions.In this study,hydrochloric acid was used as a leaching agent,and the effects of the hydrochloric acid concentration,leaching time,temperature,and liquid-solid ratio on the P leaching ratio were investigated.Furthermore,the co-leaching of macro-metals Ca,Al,Fe,and Mg was analyzed.The results showed that P leached rapidly within 30 min,where the leaching rate reached more than 80%and then gradually stabilized.The leaching concentrations of Ca and Mg had a significant correlation(correlation coefficient r^(2)>0.90),and both were leached completely.Al and P had similar leaching patterns,where the leaching rates increased initially and then decreased with time at 0.2 mol/L HCl.According to X-ray diffraction analysis and Rietveld refinement,the P in ISSA was mainly present in the forms of Mg_(3)Ca_(3)(PO_(4))_(4) and AlPO_(4).When leached using 0.2 mol/L HCl at 55℃ with a liquid-to-solid ratio of 20 L/kg,the AlPO_(4) and Fe_(3)(H_(2)O)_(3)(PO_(4))_(2) in ISSA dissolved initially and then precipitated on the surface of the solid phase,thereby impeding further P leaching.展开更多
Synchrotron polychromatic X-ray microdiffraction（micro-XRD） was applied to study in situ deformation twinning of commercially AZ31（Mg-3Al-1Zn） strip subjected to uniaxial tension.The morphology and growth of twins...Synchrotron polychromatic X-ray microdiffraction（micro-XRD） was applied to study in situ deformation twinning of commercially AZ31（Mg-3Al-1Zn） strip subjected to uniaxial tension.The morphology and growth of twins were analyzed in situ under the load level from 64 to 73 MPa.The X-ray microdiffraction data,collected on beamline 12.3.2 at the Advanced Light Source,were then used to map an area of 396μm x 200μm within the region of interest.The experimental set-up and X-ray diffraction microscopy with a depth resolution allow the position and orientation of each illuminated grain to be determined at the submicron size.A list of parent grains sorted by crystallographic orientation were selected to examine their twinning behavior.The results depict twin variant selection,local misorientation fluctuation and mosaic spread for multi-twins within the same parent grain.As load increases,the amplitude of misorientation fluctuation along twin trace keeps increasing.This is attributable to the accumulation of geometrically necessary dislocations.展开更多
A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample ...A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.展开更多
The formation cause of orange peel of aluminum-alloy automotive sheet after tensile deformation was analysed by using X-ray diffraction and electron back-scattered diffraction(EBSD).The test results showed that format...The formation cause of orange peel of aluminum-alloy automotive sheet after tensile deformation was analysed by using X-ray diffraction and electron back-scattered diffraction(EBSD).The test results showed that formation cause of surface orange peel after tensile deformation related to product texture and nonuniform deformation during the tensile process.The grain size has significant effect on deformation uniform and texture formation.Coarse grains were easy to produce nonuniform deformation and texture,which would produce surface orange peel after tensile deformation.展开更多
LiNi0.9Co0.15Al0.05O2 （NCA） material is successfully synthesized with a modified co-precipitation method,in which NH3,H2O and EDTA are used as two chelating agents. The obtained LiNi0.9Co0.15Al0.05O2 materialhas wel...LiNi0.9Co0.15Al0.05O2 （NCA） material is successfully synthesized with a modified co-precipitation method,in which NH3,H2O and EDTA are used as two chelating agents. The obtained LiNi0.9Co0.15Al0.05O2 materialhas well-defined layered structure and uniform element distribution, which reveals an enhanced electro-chemical performance with a capacity retention of 97.9% after 100 cycles at 0.2 C, and reduced thermalrunaway from the isothermal calorimetry test. In situ X-ray diffraction （XRD） was employed to capturethe structural changes during the charge-discharge process. The reversible evolutions of lattice parame-ters （a, b, c, and V） further verify the structural stability.展开更多
Fitting of full X-ray diffraction patterns is an effective method for quantifying abundances during X-ray diffraction (XRD) analyses. The method is based on the principal that the observed diffraction pattern is the s...Fitting of full X-ray diffraction patterns is an effective method for quantifying abundances during X-ray diffraction (XRD) analyses. The method is based on the principal that the observed diffraction pattern is the sum of the individual phases that compose the sample. By adding an internal standard (usually corundum) to both the observed patterns and to those for individual pure phases (standards), all patterns can all be normalized to an equivalent intensity based on the internal standard intensity. Using least-squares refinement, the individual phase proportions are varied until an optimal match is reached. As the fitting of full patterns uses the entire pattern, including background, disordered and amorphous phases are explicitly considered as individual phases, with their individual intensity profiles or “amorphous humps” included in the refinement. The method can be applied not only to samples that contain well-ordered materials, but it is particularly well suited for samples containing amorphous and/or disordered materials. In cases with extremely disordered materials where no crystal structure is available for Rietveld refinement or there is no unique intensity area that can be measured for a traditional RIR analysis, full-pattern fitting may be the best or only way to readily obtain quantitative results. This approach is also applicable in cases where there are several coexisting highly disordered phases. As all phases are considered as discrete individual components, abundances are not constrained to sum to 100%.展开更多
This paper investigates the major structural parameters, such as crystal quality and strain state of （001）-oriented GaN thin films grown on sapphire substrates by metalorganic chemical vapour deposition, using an in...This paper investigates the major structural parameters, such as crystal quality and strain state of （001）-oriented GaN thin films grown on sapphire substrates by metalorganic chemical vapour deposition, using an in-plane grazing incidence x-ray diffraction technique. The results are analysed and compared with a complementary out-of-plane x- ray diffraction technique. The twist of the GaN mosaic structure is determined through the direct grazing incidence t of （100） reflection which agrees well with the result obtained by extrapolation method. The method for directly determining the in-plane lattice parameters of the GaN layers is also presented. Combined with the biaxial strain model, it derives the lattice parameters corresponding to fully relaxed GaN films. The GaN epilayers show an increasing residual compressive stress with increasing layer thickness when the two dimensional growth stage is established, reaching to a maximum level of-0.89 GPa.展开更多
文摘Based on the X-ray scattering intensity theory,the correction factors of the degree of crystallinity formulae of the multicomponent polymers have been clearly defined.The formula of degree of erystallinity of the multicomponent polymers was derived in terms of the WAXD theory ahd improved graphic multipeak resolution methods.The results calculated are compatible with the density measurement.
文摘The properties of synthetic graphite materials, widely used in advanced fields, are determined by their structure, which is formed in the process of high-temperature (~2500<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C) heat treatment. The fine structure of a graphitizing carbon material based on petroleum coke containing 1.3 wt% S at various stages of graphitization was studied by X-ray diffraction analysis. Some of the samples contained the addition of dispersed Fe<sub>2</sub>O<sub>3</sub>. It is shown that the heat-treated material in the range 1200<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C - 2600<span style="white-space:normal;"><span style="white-space:nowrap;">°</span></span><span style="white-space:normal;"></span>C is heterogeneous, its component composition is determined by the processing temperature and the presence of Fe<sub>2</sub>O<sub>3</sub> additive. The observed dependence of the component composition on the heat treatment temperature suggests that the process of graphitization of the carbon material, apparently, develops through a number of metastable states.
文摘Cold worked and annealed supersaturated Cu-2.65Ni-0.6Si and Cu-2.35Ni-0.6Si-0.6Cr alloys were studied. The microstructural parameters evolution, including crystallite size, root mean square strain and dislocation density was analyzed using Materials Analysis Using Diffraction software （MAUD）. The parameters for both alloys have typical values of cold deformed and subsequently annealed copper based alloy. A net change of the crystallite size, root mean square strain and dislocation density values of the alloys aged at 450 °C for 2.5-3 h seems corresponding to the recovery and recrystallization processes. Addition of Cr as quaternary element did not lead to any drastic changes of post deformation or ageing microstructural parameters and hence of recovery-recrystallization kinetics.
基金the financial support by the National Natural Science Foundation of China (51871133, 51671115)support by the Department of Science and Technology of the Shandong Province for the Young Tip-Top Talent Support Project.
文摘The understanding of reaction mechanisms of electrode materials is of significant importance for the development of advanced batteries.The LiMn2O4 cathode has a voltage plateau around 2.8 V(vs.Li^+/Li),which can provide an additional capacity for Li storage,but it suffers from a severe capacity degradation.In this study,operando X-ray diffraction is carried out to investigate the structural evolutions and degradation mechanisms of LiMn2O4 in different voltage ranges.In the range of 3.0-4.3 V(vs.Li^+/Li),the LiMn2O4 cathode exhibits a low capacity but good cycling stability with cycles up to 100 cycles and the charge/discharge processes are associated with the reversible extraction/insertion of Li^+from/into LixMn2O4(0≤x≤1).In the range of 1.4-4.4 V(vs.Li^+/Li),a capacity higher than 200 mAh/g is achieved,but it rapidly decays during the cycling.The voltage plateau around 2.8 V(vs.Li^+/Li)is related to the transformation of the cubic LiMn2O4 phase to the tetragonal Li2Mn2O4 phase,which leads to the formation of cracks as well as the performance degradation.
基金Project supported by the National Project on Protein Structural and Functional Analyses from the Ministry of Education, Culture, Sports, Science, and Technology of Japan
文摘RNA methyltransferase is responsible for transferring methyl and resulting in methylation on the bases or ribose ring of RNA, which existed widely but mostly remains an open question. A recombinant protein PH1948 predicting RNA methyl- transferase from Pyrococcus horikoshii OT3 has been crystallized. The crystals of selenomethionyl PH1948 belong to space group C2, with unit-cell parameters a=207.0 ?, b=43.1 ?, c=118.2 ?, β=92.1°, and diffract X-rays to 2.2 ? resolution. The VM value was determined to be 2.8 ?3/Da, indicating the presence of four protein molecules in the asymmetric unit.
文摘Results of researches on plastic deformation of steels were obtained by acoustic emission and X-ray methods.The new numerical-analytical method of the thin structure parameter determination on one diffraction line was offered.It is supposed that with a growth of the deformation the cubic lattice will be transformed in the orthorhombic lattice.It is shown that changes of a condition of crystal structure of austenitic steel occur in four stages and of carbonaceous steel occur in six stages.Existence of two types of acoustic emission sources in carbonaceous steel and one type of acoustic emission source in austenitic steel was proposed.
基金Supported by the National Natural Science Foundation of China （40972106） the Major Projects of the National Science and Technology of China （2011ZX05042-001-002） the Central Universities Fundamental Research Special Foundation of China （292011266）
文摘Based on analysis on X-ray diffraction, the metamorphic grade of coal in southeast Qinshui Basin was discussed, and a precise evaluation of coal rank through XRD analysis was made, in addition, the correlation of coal rank and vitrinite reflectance （Ro） was compared. XRD spectra of coal shows （002）-band and γ-band, and based on fitting calculation and multi-peak separation methods, the values of 2θ002 and 2θγ can be obtained, as well as corresponding intensities I002 and Iγ, consequently the coal rank can be quantized as the ratio of I002 and Iγ, that is coal rank=I002/Iγ. The research shows that the values of θ002 and θγ increase with the metamorphic grade, and a very good linear positive correlation exists between calculated Coal Rank and Ro.
文摘To study the physical and chemical properties of uranium catalyst by impregnation and calcination us was first obtained uranium catalyst SAPO-U, Nd, Sb, Bi. The method of X-ray structure has been studied of the uranium catalyst SAPO-U, Nd, Sb, Bi.
文摘To study the physical and chemical properties of aluminosilicate microsphere catalyst by impregnation and calcination us was first obtained aluminosilicate microsphere catalyst U, Nd for petrochemical processes. The method of X-ray structure has been studied for the microsphere catalyst U, Nd.
文摘Exodeoxyribonuclease III (EXOIII) acts as a 3’→5’ exonuclease and is homologous to purinic/apyrimidinic (AP) endonuclease (APE), which plays an important role in the base excision repair pathway. To structurally investigate the reaction and substrate recognition mechanisms of EXOIII, a crystallographic study of EXOIII from Sulfolobus tokodaii strain 7 was carried out. The purified enzyme was crystallized by using the hanging-drop vapor-diffusion method. The crystals belonged to space group C2, with unit-cell parameters a = 154.2, b = 47.7, c = 92.4 ?, β = 125.8° and diffracted to 1.5 ? resolution.
基金supported by the Australian Research Council Linkage Project(No.LP200200717)co sponsored by Newmont Corporation(United States)and Vega Industries(India)+1 种基金the Powder Diffraction Beamline at the Australia’s Nuclear Science and Technology Organisation(No.PDR19870),Australiathe Centre for Microscopy and Microanalysis at the University of Queensland(No.1366),Australia。
文摘Pyrrhotite naturally occurs in various superstructures including magnetic(4C)and non-magnetic(5C,6C)types,each with distinct physicochemical properties and flotation behaviors.Challenges in accurately identifying and quantifying these superstructures hinder the optimization of pyrrhotite depression in flotation processes.To address this critical issue,synchrotron X-ray powder diffraction(S-XRPD)with Rietveld refinement was employed to quantify the distribution of superstructures in the feed and flotation concentrates of a copper–gold ore.To elucidate the mechanisms influencing depression,density functional theory(DFT)calculations were conducted to explore the electronic structures and surface reactivity of the pyrrhotite superstructures toward the adsorption of water,oxygen and hydroxyl ions(OH-)as dominant species present in the flotation process.S-XRPD analysis revealed that flotation recovery rates of pyrrhotite followed the order of 4C<6C<5C.DFT calculations indicated that the Fe 3d and S 3p orbital band centers exhibited a similar trend relative to the Fermi level with 4C being the closest.The Fe3d band center suggested that the 4C structure possessed a more reactive surface toward the oxygen reduction reaction,promoting the formation of hydrophilic Fe-OH sites.The S 3p band center order also implied that xanthate on the non-magnetic 5C and 6C surfaces could oxidize to dixanthogen,increasing hydrophobicity and floatability,while 4C formed less hydrophobic metal-xanthate complexes.Adsorption energy and charge transfer analyses of water,hydroxyl ions and molecular oxygen further supported the high reactivity and hydrophilic nature of 4C pyrrhotite.The strong bonding with hydroxyl ions indicated enhanced surface passivation by hydrophilic Fe–OOH complexes,aligning with the experimentally observed flotation order(4C<6C<5C).These findings provide a compelling correlation between experimental flotation results and electronic structure calculations,delivering crucial insights for optimizing flotation processes and improving pyrrhotite depression.This breakthrough opens up new opportunities to enhance the efficiency of flotation processes in the mining industry.
基金supported by the State Grid Corporation Science and Technology Project(No.5419-202158503A-0-5-ZN)。
文摘The detrimental phase transformations of sodium layered transition metal oxides(Na_(x)TMO_(2))during desodiation/sodiation seriously suppress their practical applications for sodium ion batteries(SIBs).Undoubtedly,comprehensively investigating of the dynamic crystal structure evolutions of Na_(x)TMO_(2)associating with Na ions extraction/intercalation and then deeply understanding of the relationships between electrochemical performances and phase structures drawing support from advanced characterization techniques are indispensable.In-situ high-energy X-ray diffraction(HEXRD),a powerful technology to distinguish the crystal structure of electrode materials,has been widely used to identify the phase evolutions of Na_(x)TMO_(2)and then profoundly revealed the electrochemical reaction processes.In this review,we begin with the descriptions of synchrotron characterization techniques and then present the advantages of synchrotron X-ray diffraction(XRD)over conventional XRD in detail.The optimizations of structural stability and electrochemical properties for P2-,O3-,and P2/O3-type Na_(x)TMO_(2)cathodes through single/dual-site substitution,high-entropy design,phase composition regulation,and surface engineering are summarized.The dynamic crystal structure evolutions of Na_(x)TMO_(2)polytypes during Na ion extraction/intercalation as well as corresponding structural enhancement mechanisms characterizing by means of HEXRD are concluded.The interior relationships between structure/component of Na_(x)TMO_(2)polytypes and their electrochemical properties are discussed.Finally,we look forward the research directions and issues in the route to improve the electrochemical properties of Na_(x)TMO_(2)cathodes for SIBs in the future and the combined utilizations of multiple characterization techniques.This review will provide significant guidelines for rational designs of high-performance Na_(x)TMO_(2)cathodes.
基金supported by the National Natural Science Foundation of China(No.12175158)the Institute of Nuclear Physics and Chemistry,China Academy of Engineering Physics(No.HG2022022)。
文摘β-ray-induced X-ray spectroscopy(BIXS)is a promising technique for tritium analysis that offers several unique advantages,including substantial detection depth,nondestructive testing capabilities,and ease of operation.For thin solid tritium-containing samples with substrates,the currently used BIXS analysis method can measure the tritium depth profile and content when the sample thickness is known.In this study,a backpropagation(BP)neural network algorithm was used to predict the tritium content and thickness of a thin solid tritium-containing sample with substrates and a uniformly distributed tritium profile.A semi-analytical method was used to generate datasets for training and testing the BP neural network.A dataset ofβ-decay X-ray spectra from 420 tritium-containing zirconium models with different known thicknesses and tritium-tozirconium ratios was used as the input data.The corresponding zirconium thicknesses and tritium-to-zirconium ratios served as the output for training and testing the BP neural network.The mean relative errors(MREs)of the zirconium thickness in the training and test datasets were 0.56%and 0.42%,respectively,whereas the MREs of the tritium-to-zirconium ratio were 0.59%and 0.38%,respectively.Furthermore,the trained BP neural network demonstrates excellent predictive capability across various levels of statistical uncertainty.For the experimentalβ-decay X-ray spectra of two tritium-containing samples,the predicted zirconium thicknesses and tritium-to-zirconium ratios showed good agreement with the results obtained through the elastic backscattering spectrometry(EBS).
基金supported by the Major Science and Technology Program for Water Pollution Control and Treatment(2017ZX07202005).
文摘Phosphorus(P)is an essential and limited resource.Incineration sewage sludge ash(ISSA)contains a high amount of P,which can be recovered using chemical leaching methods.However,the recovery ratio depends on the speciation of P and the leaching conditions.In this study,hydrochloric acid was used as a leaching agent,and the effects of the hydrochloric acid concentration,leaching time,temperature,and liquid-solid ratio on the P leaching ratio were investigated.Furthermore,the co-leaching of macro-metals Ca,Al,Fe,and Mg was analyzed.The results showed that P leached rapidly within 30 min,where the leaching rate reached more than 80%and then gradually stabilized.The leaching concentrations of Ca and Mg had a significant correlation(correlation coefficient r^(2)>0.90),and both were leached completely.Al and P had similar leaching patterns,where the leaching rates increased initially and then decreased with time at 0.2 mol/L HCl.According to X-ray diffraction analysis and Rietveld refinement,the P in ISSA was mainly present in the forms of Mg_(3)Ca_(3)(PO_(4))_(4) and AlPO_(4).When leached using 0.2 mol/L HCl at 55℃ with a liquid-to-solid ratio of 20 L/kg,the AlPO_(4) and Fe_(3)(H_(2)O)_(3)(PO_(4))_(2) in ISSA dissolved initially and then precipitated on the surface of the solid phase,thereby impeding further P leaching.
基金Project(DP140102355)supported by the Australian Research Council(ARC)Project supported by the China Scholarship Council(CSC)
文摘Synchrotron polychromatic X-ray microdiffraction（micro-XRD） was applied to study in situ deformation twinning of commercially AZ31（Mg-3Al-1Zn） strip subjected to uniaxial tension.The morphology and growth of twins were analyzed in situ under the load level from 64 to 73 MPa.The X-ray microdiffraction data,collected on beamline 12.3.2 at the Advanced Light Source,were then used to map an area of 396μm x 200μm within the region of interest.The experimental set-up and X-ray diffraction microscopy with a depth resolution allow the position and orientation of each illuminated grain to be determined at the submicron size.A list of parent grains sorted by crystallographic orientation were selected to examine their twinning behavior.The results depict twin variant selection,local misorientation fluctuation and mosaic spread for multi-twins within the same parent grain.As load increases,the amplitude of misorientation fluctuation along twin trace keeps increasing.This is attributable to the accumulation of geometrically necessary dislocations.
文摘A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.
文摘The formation cause of orange peel of aluminum-alloy automotive sheet after tensile deformation was analysed by using X-ray diffraction and electron back-scattered diffraction(EBSD).The test results showed that formation cause of surface orange peel after tensile deformation related to product texture and nonuniform deformation during the tensile process.The grain size has significant effect on deformation uniform and texture formation.Coarse grains were easy to produce nonuniform deformation and texture,which would produce surface orange peel after tensile deformation.
基金partially supported by the National Key Research and Development Program of China (2016YFB0100203)the National Natural Science Foundation of China (21673116,21633003)+1 种基金the Natural Science Foundation of Jiangsu Province of China (BK20160068)PAPD of Jiangsu Higher Education Institutions
文摘LiNi0.9Co0.15Al0.05O2 （NCA） material is successfully synthesized with a modified co-precipitation method,in which NH3,H2O and EDTA are used as two chelating agents. The obtained LiNi0.9Co0.15Al0.05O2 materialhas well-defined layered structure and uniform element distribution, which reveals an enhanced electro-chemical performance with a capacity retention of 97.9% after 100 cycles at 0.2 C, and reduced thermalrunaway from the isothermal calorimetry test. In situ X-ray diffraction （XRD） was employed to capturethe structural changes during the charge-discharge process. The reversible evolutions of lattice parame-ters （a, b, c, and V） further verify the structural stability.
文摘Fitting of full X-ray diffraction patterns is an effective method for quantifying abundances during X-ray diffraction (XRD) analyses. The method is based on the principal that the observed diffraction pattern is the sum of the individual phases that compose the sample. By adding an internal standard (usually corundum) to both the observed patterns and to those for individual pure phases (standards), all patterns can all be normalized to an equivalent intensity based on the internal standard intensity. Using least-squares refinement, the individual phase proportions are varied until an optimal match is reached. As the fitting of full patterns uses the entire pattern, including background, disordered and amorphous phases are explicitly considered as individual phases, with their individual intensity profiles or “amorphous humps” included in the refinement. The method can be applied not only to samples that contain well-ordered materials, but it is particularly well suited for samples containing amorphous and/or disordered materials. In cases with extremely disordered materials where no crystal structure is available for Rietveld refinement or there is no unique intensity area that can be measured for a traditional RIR analysis, full-pattern fitting may be the best or only way to readily obtain quantitative results. This approach is also applicable in cases where there are several coexisting highly disordered phases. As all phases are considered as discrete individual components, abundances are not constrained to sum to 100%.
基金supported by the National Natural Science Foundation of China (Grant Nos. 60506001,60776047,60976045 and 60836003)the National Basic Research Programme of China (Grant No. 2007CB936700)the National Science Foundation for Distinguished Young Scholars,China (Grant No. 60925017)
文摘This paper investigates the major structural parameters, such as crystal quality and strain state of （001）-oriented GaN thin films grown on sapphire substrates by metalorganic chemical vapour deposition, using an in-plane grazing incidence x-ray diffraction technique. The results are analysed and compared with a complementary out-of-plane x- ray diffraction technique. The twist of the GaN mosaic structure is determined through the direct grazing incidence t of （100） reflection which agrees well with the result obtained by extrapolation method. The method for directly determining the in-plane lattice parameters of the GaN layers is also presented. Combined with the biaxial strain model, it derives the lattice parameters corresponding to fully relaxed GaN films. The GaN epilayers show an increasing residual compressive stress with increasing layer thickness when the two dimensional growth stage is established, reaching to a maximum level of-0.89 GPa.
