Energy recovery threshold logic (ERTL) is proposed,which combines threshold logic with adiabatic approach.ERTL achieves low energy as well as low gate complexity.A high efficiency power clock generator is also propose...Energy recovery threshold logic (ERTL) is proposed,which combines threshold logic with adiabatic approach.ERTL achieves low energy as well as low gate complexity.A high efficiency power clock generator is also proposed,which can adjust duty cycle of MOS switch in power clock generator depending on logic complexity and operating frequency to achieve optimum energy efficiency.Closed-form results are derived,which facilitate efficiency-optimized design of the power clock generator.An ERTL PLA and a conventional PLA are designed and simulated on 0.35μm process.The energy efficiency of the proposed power clock generator can reach 77%～85% operating between 20～100MHz.Simulation results indicate that ERTL is a low energy logic.Including power loss of power clock circuits,ERTL PLA still shows 65%～77% power savings compared to conventional PLA.展开更多
A multi-valued logic system is a promising alternative to traditional binary logic because it can reduce the complexity,power consumption, and area of circuit implementation. This article briefly summarizes the develo...A multi-valued logic system is a promising alternative to traditional binary logic because it can reduce the complexity,power consumption, and area of circuit implementation. This article briefly summarizes the development of ternary logic and its advantages in digital logic circuits. The schemes, characteristics, and application of ternary logic circuits based on CMOS, CNTFET, memristor, and other devices and processes are reviewed in this paper, providing some reference for the further research and development of ternary logic circuits.展开更多
The single fault and multiple fault detections for multiple-valued logic circuits are studied in this paper. Firstly, it is shown that the cardinality of optimal single fault test set for fanout-free m-valued circuits...The single fault and multiple fault detections for multiple-valued logic circuits are studied in this paper. Firstly, it is shown that the cardinality of optimal single fault test set for fanout-free m-valued circuits with n primary inputs is not more than n + 1, for linear tree circuits is two, and for multiplication modulo circuits is two if n is an odd number or if n is an even number and m ＞ 3, where the optimal test set of a circuit has minimal number of test vectors. Secondly,it is indicated that the cardinality of optimal multiple fault test set for linear tree circuits with n primary inputs is 1 + [n/(m - 1)], for multiplication modulo circuits is n+ 1, for fanout-free circuits that consist of 2-input linear tree circuits and 2-input multiplication modulo circuits is not greater than n+ 1, where [x] denotes the smallest integer greater than or equal to x. Finally,the single fault location approaches of linear tree circuits and multiplication modulo circuits are presented, and all faults in the two types of circuits can be located by using a test set with n + 1 vectors.展开更多
In this research, a fast methodology to calculate the exact value of the average dynamic power consumption for CMOS combinational logic circuits is developed. The delay model used is the unit-delay model where all gat...In this research, a fast methodology to calculate the exact value of the average dynamic power consumption for CMOS combinational logic circuits is developed. The delay model used is the unit-delay model where all gates have the same propagation delay. The main advantages of this method over other techniques are its accuracy, as it is deterministic and it requires less computational effort compared to exhaustive simulation approaches. The methodology uses the Logic Pictures concept for obtaining the nodes’ toggle rates. The proposed method is applied to well-known circuits and the results are compared to exhaustive simulation and Monte Carlosimulation methods.展开更多
This paper presents a novel approach to design robust Source Coupled Logic (SCL) for implementing ultra low power circuits. In this paper, we propose two different source coupled logic structures and analyze the perfo...This paper presents a novel approach to design robust Source Coupled Logic (SCL) for implementing ultra low power circuits. In this paper, we propose two different source coupled logic structures and analyze the performance of these structures with STSCL (Sub-threshold SCL). The first design under consideration is DTPMOS as load device which analyses the performance of Dynamic Threshold SCL (DTSCL) Logic with previous source coupled logic for ultra low power operation. DTSCL circuits exhibit a better power-delay Performance compared with the STSCL Logic. It can be seen that the proposed circuit provides 56% reduction in power delay product. The second design under consideration uses basic current mirror active load device to provide required voltage swing. Current mirror source coupled logic (CMSCL) can be used for high speed operation. The advantage of this design is that it provides 54% reduction in power delay product over conventional STSCL. The main drawback of this design is that it provides a higher power dissipation compared to other source coupled logic structures. The proposed circuit provides lower sensitivity to temperature and power supply variation, with a superior control over power dissipation. Measurements of test structures simulated in 0.18 μm CMOS technology shows that the proposed DTSCL logic concept can be utilized successfully for bias currents as low as 1 pA. Measurements show that existing standard cell libraries offer a good solution for ultra low power SCL circuits. Cadence Virtuoso schematic editor and Spectre Simulation tools have been used.展开更多
In this paper, the authors continue the researches described in [1], that consists in a comparative study of two methods to eliminate the static hazard from logical functions, by using the form of Product of Sums (POS...In this paper, the authors continue the researches described in [1], that consists in a comparative study of two methods to eliminate the static hazard from logical functions, by using the form of Product of Sums (POS), static hazard “0”. In the first method, it used the consensus theorem to determine the cover term that is equal with the product of the two residual implicants, and in the second method it resolved a Boolean equation system. The authors observed that in the second method the digital hazard can be earlier detected. If the Boolean equation system is incompatible (doesn’t have solutions), the considered logical function doesn’t have the static 1 hazard regarding the coupled variable. Using the logical computations, this method permits to determine the needed transitions to eliminate the digital hazard.展开更多
A general method for designing ternary circuits using double pass-transistor logic is investigated. The logical relation of each MOS transistor is formulated by using the transmission operation in order to make effect...A general method for designing ternary circuits using double pass-transistor logic is investigated. The logical relation of each MOS transistor is formulated by using the transmission operation in order to make effective and practical use of the circuits. A way to generate ternary complementary and dual circuits by applying the complementarity and duality principles is presented. This new static ternary double pass-transistor logic scheme has some favorable properties：the use of standard CMOS process without any modification of the thresholds, a perfectly symmetrical structure,a full logic swing, the maximum possible noise margins, a less complex structure, and no static power consumption. HSPICE simulations using TSMC 0.25μm CMOS technology and a 3V power supply demonstrate the effectiveness of the proposed design.展开更多
Propose the sequential circuits with the ternary D-ffs in series^1. Discuss the equivalence between the sequential circuits with the p-valued flip-flops in series and in parallel as a part of studying the multiple val...Propose the sequential circuits with the ternary D-ffs in series^1. Discuss the equivalence between the sequential circuits with the p-valued flip-flops in series and in parallel as a part of studying the multiple valued logic circuits.展开更多
By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is su...By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is suitable to current-mode CMOS circuits is proposed. Thecircuits, such as ternary full-adder etc., designed by using this theory have simpler circuit struc-tures and correct logic functions. It is confirmed that this theory is efficient in guiding the logicdesign of current-mode CMOS circuits at switch level.展开更多
First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked...First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked Transmission Gate Adiabatic Logic （CTGAL） circuit is presented. This circuit makes use of the clocked transmission gates to sample the input signals, then the output loads are charged and discharged in a fully adiabatic manner by using bootstrapped N-Channel Metal Oxide Semiconductor （NMOS） and Complementary Metal Oxide Semiconductor （CMOS） latch structure. Finally, with the parameters of Taiwan Semiconductor Manufacturing Company （TSMC） 0.25um CMOS device, the transient energy consumption of CTGAL, Bootstrap Charge-Recovery Logic （BCRL） and Pass-transistor Adiabatic Logic （PAL） including their clock generators is simulated. The simulation result indicates that CTGAL circuit has the characteristic of remarkably low energy consumption.展开更多
By analyzing the threshold-jumping of Schmitt circuits, this paper indicates that the core element realizing this function in binary TTL Schmitt circuits is the differential current switch with controllable threshold....By analyzing the threshold-jumping of Schmitt circuits, this paper indicates that the core element realizing this function in binary TTL Schmitt circuits is the differential current switch with controllable threshold. Based on the characteristic having two kinds of signal-detection threshold in ternary TTL circuits, a ternary TTL Schmitt circuit having twice reactions of threshold-jumping is designed. The simulation with PSPICE proves that the designed circuit has ideal function of Schmitt circuits.展开更多
The physical limitations of complementary metal-oxide semiconductor?(CMOS) technology have led many researchers to consider other alternative technologies. Quantum-dot cellular automate (QCA), single electron tunnelin...The physical limitations of complementary metal-oxide semiconductor?(CMOS) technology have led many researchers to consider other alternative technologies. Quantum-dot cellular automate (QCA), single electron tunneling (SET), tunneling phase logic (TPL), spintronic devices, etc., are some of the nanotechnologies that are being considered as possible replacements for CMOS. In these nanotechnologies, the basic logic units used to implement circuits are majority and/or minority gates. Several majority/minority logic circuit synthesis methods have been proposed. In this paper, we give a comparative study of the existing majority/minority logic circuit synthesis methods that are capable of synthesizing multi-input multi-output Boolean functions. Each of these methods is discussed in detail. The optimization priorities given to different factors such as gates, levels, inverters, etc., vary with technologies. Based on these optimization factors, the results obtained from different synthesis methods are compared. The paper also analyzes the optimization capabilities of different methods and discusses directions for future research in the synthesis of majority/minority logic networks.展开更多
In order to improve the circuit complexity and reduce the long latency of B-1 operations,a novel B-1 operation in Galois Field GF(24)is presented and the corresponding systolic realization based on multiple-valued log...In order to improve the circuit complexity and reduce the long latency of B-1 operations,a novel B-1 operation in Galois Field GF(24)is presented and the corresponding systolic realization based on multiple-valued logic(MVL)is proposed.The systolic structure employs multiplevalued current mode(MVCM)by using dynamic source-coupled logic(SCL)to reduce the initial delay and the transistor and wire counts.The performance is evaluated by HSPICE simulation in 0.18μm CMOS technology and a comparison is conducted between our proposed implementation and those reported in the literature.The initial delay and the sum of transistors and wires in our MVL design are about 43%and 13%lower,respectively,in comparison with other corresponding binary CMOS implementations.The systolic architecture proposed is simple,regular,and modular,well suited for very large scale integration(VLSI)implementations.The combination of MVCM circuits and relevant algorithms based on MVL seems to be a potential solution for high performance arithmetic operations in GF(2k).展开更多
New methodologies for l-Bit XOR-XNOR full- adder circuits are proposed to improve the speed and power as these circuits are basic building blocks for ALU circuit implementation. This paper presents comparative study o...New methodologies for l-Bit XOR-XNOR full- adder circuits are proposed to improve the speed and power as these circuits are basic building blocks for ALU circuit implementation. This paper presents comparative study of high-speed, low-power and low voltage full adder circuits. Simulation results illustrate the superiority of the proposed adder circuit against the conventional complementary metal-oxide-semiconductor （CMOS）, complementary pass-transistor logic （CPL）, TG, and Hybrid adder circuits in terms of delay, power and power delay product （PDP）. Simulation results reveal that the proposed circuit exhibits lower PDP and is more power efficient and faster when compared with the best available 1-bit full adder circuits. The design is implemented on UMC 0.18 μm process models in Cadence Virtuoso Schematic Composer at 1.8 V single ended supply voltage and simulations are carried out on Spectre S.展开更多
Recently, it has been demonstrated that memristors can be utilized as logic operations and memory elements. In this paper, we present a novel circuit design for complementary resistive switch（CRS）-based stateful log...Recently, it has been demonstrated that memristors can be utilized as logic operations and memory elements. In this paper, we present a novel circuit design for complementary resistive switch（CRS）-based stateful logic operations. The proposed circuit can automatically write the destructive CRS cells back to the original states. In addition, the circuit can be used in massive passive crossbar arrays which can reduce sneak path current greatly. Moreover, the steps for CRS logic operations using our proposed circuit are reduced compared with previous circuit designs. We validate the effectiveness of our scheme through Hspice simulations on the logic circuits.展开更多
This paper proposes a simplification method for realization of current-mode multivalued CMOS circuits. The key of this method is to find a cover on the K-map for a given multivalued function, which fits to the realiza...This paper proposes a simplification method for realization of current-mode multivalued CMOS circuits. The key of this method is to find a cover on the K-map for a given multivalued function, which fits to the realization of current-mode CMOS circuits. The design example shows that the design presented in this paper is better than the design proposed by G. W. Dueck et al. (1987).展开更多
The paper discusses general expressions of the clock signal and the next state equations containing the clock signal for flip-flops, and based on it, a unified theory for designing and analyzing both synchronous and a...The paper discusses general expressions of the clock signal and the next state equations containing the clock signal for flip-flops, and based on it, a unified theory for designing and analyzing both synchronous and asynchronous sequential circuits is proposed. The theory is proved effective by practical examples.展开更多
Based on analyzing significance of controlling clock in design of low power sequential circuits, this paper proposes a technique that the gating signal is derived from the master latch in a flip-flop to make the deriv...Based on analyzing significance of controlling clock in design of low power sequential circuits, this paper proposes a technique that the gating signal is derived from the master latch in a flip-flop to make the derived clock having no glitch and no skew. The design of a decimal counter with half-frequency division shows that by using the synchronous derived clock the counter has lower power dissipation as well as simpler combinational logic. Computer simulation shows 20% power saving.展开更多
The theory of differential current switches which applies to the design of multivaluedECL circuits is introduced.In this theory,the switching state of differential transistor pairand signal in ECL circuits are describ...The theory of differential current switches which applies to the design of multivaluedECL circuits is introduced.In this theory,the switching state of differential transistor pairand signal in ECL circuits are described by switching variables and quaternary signal variables,respectively.he connection operations between the two kinds of variables are introduced todescribe the action process between switching element and signal in the circuits.Based on thistheory,two kinds of interface circuits-2-4 encoder and 4-2 decoder are designed.The computersimulation for the designed circuits by using SPICE program confirms that both circuits havecorrect logic functions,desired DO transfer characteristics and transient characteristics.Theseinterface circuits are compatible with binary circuits in the integrated process,the power supplyequipment,the logic stage and the transient characteristic.Therefore,they can be used as input-output interface of the existing binary ECL integrated circuits so as to decrease the number ofpins of a chip and the connections between chips.展开更多
Based on transmission function theory,the synthesis technique for multivaluedCMOS circuits is discussed.By comparing the CMOS circuits based on transmission functiontheory with the T gate,it is shown that their action...Based on transmission function theory,the synthesis technique for multivaluedCMOS circuits is discussed.By comparing the CMOS circuits based on transmission functiontheory with the T gate,it is shown that their action principles are identical.Based on it,thesynthesis method for multivalued CMOS circuits with many variables by using function decom-position is proposed.展开更多
文摘Energy recovery threshold logic (ERTL) is proposed,which combines threshold logic with adiabatic approach.ERTL achieves low energy as well as low gate complexity.A high efficiency power clock generator is also proposed,which can adjust duty cycle of MOS switch in power clock generator depending on logic complexity and operating frequency to achieve optimum energy efficiency.Closed-form results are derived,which facilitate efficiency-optimized design of the power clock generator.An ERTL PLA and a conventional PLA are designed and simulated on 0.35μm process.The energy efficiency of the proposed power clock generator can reach 77%～85% operating between 20～100MHz.Simulation results indicate that ERTL is a low energy logic.Including power loss of power clock circuits,ERTL PLA still shows 65%～77% power savings compared to conventional PLA.
基金Project supported in part by the National Natural Science Foundation of China (Grant No. 61871429)the Natural Science Foundation of Zhejiang Province,China (Grant No. LY18F010012)the Project of Ministry of Science and Technology of China (Grant No. D20011)。
文摘A multi-valued logic system is a promising alternative to traditional binary logic because it can reduce the complexity,power consumption, and area of circuit implementation. This article briefly summarizes the development of ternary logic and its advantages in digital logic circuits. The schemes, characteristics, and application of ternary logic circuits based on CMOS, CNTFET, memristor, and other devices and processes are reviewed in this paper, providing some reference for the further research and development of ternary logic circuits.
基金Supported by the National Natural Science Foundation of China (No.60006002) Education Department of Guangdong Province of China (No. Z02019)
文摘The single fault and multiple fault detections for multiple-valued logic circuits are studied in this paper. Firstly, it is shown that the cardinality of optimal single fault test set for fanout-free m-valued circuits with n primary inputs is not more than n + 1, for linear tree circuits is two, and for multiplication modulo circuits is two if n is an odd number or if n is an even number and m ＞ 3, where the optimal test set of a circuit has minimal number of test vectors. Secondly,it is indicated that the cardinality of optimal multiple fault test set for linear tree circuits with n primary inputs is 1 + [n/(m - 1)], for multiplication modulo circuits is n+ 1, for fanout-free circuits that consist of 2-input linear tree circuits and 2-input multiplication modulo circuits is not greater than n+ 1, where [x] denotes the smallest integer greater than or equal to x. Finally,the single fault location approaches of linear tree circuits and multiplication modulo circuits are presented, and all faults in the two types of circuits can be located by using a test set with n + 1 vectors.
文摘In this research, a fast methodology to calculate the exact value of the average dynamic power consumption for CMOS combinational logic circuits is developed. The delay model used is the unit-delay model where all gates have the same propagation delay. The main advantages of this method over other techniques are its accuracy, as it is deterministic and it requires less computational effort compared to exhaustive simulation approaches. The methodology uses the Logic Pictures concept for obtaining the nodes’ toggle rates. The proposed method is applied to well-known circuits and the results are compared to exhaustive simulation and Monte Carlosimulation methods.
文摘This paper presents a novel approach to design robust Source Coupled Logic (SCL) for implementing ultra low power circuits. In this paper, we propose two different source coupled logic structures and analyze the performance of these structures with STSCL (Sub-threshold SCL). The first design under consideration is DTPMOS as load device which analyses the performance of Dynamic Threshold SCL (DTSCL) Logic with previous source coupled logic for ultra low power operation. DTSCL circuits exhibit a better power-delay Performance compared with the STSCL Logic. It can be seen that the proposed circuit provides 56% reduction in power delay product. The second design under consideration uses basic current mirror active load device to provide required voltage swing. Current mirror source coupled logic (CMSCL) can be used for high speed operation. The advantage of this design is that it provides 54% reduction in power delay product over conventional STSCL. The main drawback of this design is that it provides a higher power dissipation compared to other source coupled logic structures. The proposed circuit provides lower sensitivity to temperature and power supply variation, with a superior control over power dissipation. Measurements of test structures simulated in 0.18 μm CMOS technology shows that the proposed DTSCL logic concept can be utilized successfully for bias currents as low as 1 pA. Measurements show that existing standard cell libraries offer a good solution for ultra low power SCL circuits. Cadence Virtuoso schematic editor and Spectre Simulation tools have been used.
文摘In this paper, the authors continue the researches described in [1], that consists in a comparative study of two methods to eliminate the static hazard from logical functions, by using the form of Product of Sums (POS), static hazard “0”. In the first method, it used the consensus theorem to determine the cover term that is equal with the product of the two residual implicants, and in the second method it resolved a Boolean equation system. The authors observed that in the second method the digital hazard can be earlier detected. If the Boolean equation system is incompatible (doesn’t have solutions), the considered logical function doesn’t have the static 1 hazard regarding the coupled variable. Using the logical computations, this method permits to determine the needed transitions to eliminate the digital hazard.
文摘A general method for designing ternary circuits using double pass-transistor logic is investigated. The logical relation of each MOS transistor is formulated by using the transmission operation in order to make effective and practical use of the circuits. A way to generate ternary complementary and dual circuits by applying the complementarity and duality principles is presented. This new static ternary double pass-transistor logic scheme has some favorable properties：the use of standard CMOS process without any modification of the thresholds, a perfectly symmetrical structure,a full logic swing, the maximum possible noise margins, a less complex structure, and no static power consumption. HSPICE simulations using TSMC 0.25μm CMOS technology and a 3V power supply demonstrate the effectiveness of the proposed design.
文摘Propose the sequential circuits with the ternary D-ffs in series^1. Discuss the equivalence between the sequential circuits with the p-valued flip-flops in series and in parallel as a part of studying the multiple valued logic circuits.
基金Supported by National Natural Science Foundation of China
文摘By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is suitable to current-mode CMOS circuits is proposed. Thecircuits, such as ternary full-adder etc., designed by using this theory have simpler circuit struc-tures and correct logic functions. It is confirmed that this theory is efficient in guiding the logicdesign of current-mode CMOS circuits at switch level.
基金Supported by the National Natural Science Foundation of China (No. 60273093)the Natural Science Foundation of Zhejinag Province(No. Y104135) the Student Sci-entific Research Foundation of Ningbo university (No.C38).
文摘First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked Transmission Gate Adiabatic Logic （CTGAL） circuit is presented. This circuit makes use of the clocked transmission gates to sample the input signals, then the output loads are charged and discharged in a fully adiabatic manner by using bootstrapped N-Channel Metal Oxide Semiconductor （NMOS） and Complementary Metal Oxide Semiconductor （CMOS） latch structure. Finally, with the parameters of Taiwan Semiconductor Manufacturing Company （TSMC） 0.25um CMOS device, the transient energy consumption of CTGAL, Bootstrap Charge-Recovery Logic （BCRL） and Pass-transistor Adiabatic Logic （PAL） including their clock generators is simulated. The simulation result indicates that CTGAL circuit has the characteristic of remarkably low energy consumption.
基金Supported by the National Natural Science Foundation of Chinathe Natural Science Foundation of Zhejiang Province
文摘By analyzing the threshold-jumping of Schmitt circuits, this paper indicates that the core element realizing this function in binary TTL Schmitt circuits is the differential current switch with controllable threshold. Based on the characteristic having two kinds of signal-detection threshold in ternary TTL circuits, a ternary TTL Schmitt circuit having twice reactions of threshold-jumping is designed. The simulation with PSPICE proves that the designed circuit has ideal function of Schmitt circuits.
文摘The physical limitations of complementary metal-oxide semiconductor?(CMOS) technology have led many researchers to consider other alternative technologies. Quantum-dot cellular automate (QCA), single electron tunneling (SET), tunneling phase logic (TPL), spintronic devices, etc., are some of the nanotechnologies that are being considered as possible replacements for CMOS. In these nanotechnologies, the basic logic units used to implement circuits are majority and/or minority gates. Several majority/minority logic circuit synthesis methods have been proposed. In this paper, we give a comparative study of the existing majority/minority logic circuit synthesis methods that are capable of synthesizing multi-input multi-output Boolean functions. Each of these methods is discussed in detail. The optimization priorities given to different factors such as gates, levels, inverters, etc., vary with technologies. Based on these optimization factors, the results obtained from different synthesis methods are compared. The paper also analyzes the optimization capabilities of different methods and discusses directions for future research in the synthesis of majority/minority logic networks.
基金Supported by the National Natural Science Foundation of China(61801027)。
文摘In order to improve the circuit complexity and reduce the long latency of B-1 operations,a novel B-1 operation in Galois Field GF(24)is presented and the corresponding systolic realization based on multiple-valued logic(MVL)is proposed.The systolic structure employs multiplevalued current mode(MVCM)by using dynamic source-coupled logic(SCL)to reduce the initial delay and the transistor and wire counts.The performance is evaluated by HSPICE simulation in 0.18μm CMOS technology and a comparison is conducted between our proposed implementation and those reported in the literature.The initial delay and the sum of transistors and wires in our MVL design are about 43%and 13%lower,respectively,in comparison with other corresponding binary CMOS implementations.The systolic architecture proposed is simple,regular,and modular,well suited for very large scale integration(VLSI)implementations.The combination of MVCM circuits and relevant algorithms based on MVL seems to be a potential solution for high performance arithmetic operations in GF(2k).
文摘New methodologies for l-Bit XOR-XNOR full- adder circuits are proposed to improve the speed and power as these circuits are basic building blocks for ALU circuit implementation. This paper presents comparative study of high-speed, low-power and low voltage full adder circuits. Simulation results illustrate the superiority of the proposed adder circuit against the conventional complementary metal-oxide-semiconductor （CMOS）, complementary pass-transistor logic （CPL）, TG, and Hybrid adder circuits in terms of delay, power and power delay product （PDP）. Simulation results reveal that the proposed circuit exhibits lower PDP and is more power efficient and faster when compared with the best available 1-bit full adder circuits. The design is implemented on UMC 0.18 μm process models in Cadence Virtuoso Schematic Composer at 1.8 V single ended supply voltage and simulations are carried out on Spectre S.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61374150 and 11271146)the State Key Program of the National Natural Science Foundation of China(Grant No.61134012)+1 种基金the Doctoral Fund of Ministry of Education of China(Grant No.20130142130012)the Science and Technology Program of Shenzhen City,China(Grant No.JCYJ20140509162710496)
文摘Recently, it has been demonstrated that memristors can be utilized as logic operations and memory elements. In this paper, we present a novel circuit design for complementary resistive switch（CRS）-based stateful logic operations. The proposed circuit can automatically write the destructive CRS cells back to the original states. In addition, the circuit can be used in massive passive crossbar arrays which can reduce sneak path current greatly. Moreover, the steps for CRS logic operations using our proposed circuit are reduced compared with previous circuit designs. We validate the effectiveness of our scheme through Hspice simulations on the logic circuits.
基金Supported by the National Natural Science Foundation of China
文摘This paper proposes a simplification method for realization of current-mode multivalued CMOS circuits. The key of this method is to find a cover on the K-map for a given multivalued function, which fits to the realization of current-mode CMOS circuits. The design example shows that the design presented in this paper is better than the design proposed by G. W. Dueck et al. (1987).
基金Supported by National Natural Science Foundation of Zhejiang Province
文摘The paper discusses general expressions of the clock signal and the next state equations containing the clock signal for flip-flops, and based on it, a unified theory for designing and analyzing both synchronous and asynchronous sequential circuits is proposed. The theory is proved effective by practical examples.
基金Supported by the NSF of China (# 69773034) and DARPA under contract # F33615-95-C-1627
文摘Based on analyzing significance of controlling clock in design of low power sequential circuits, this paper proposes a technique that the gating signal is derived from the master latch in a flip-flop to make the derived clock having no glitch and no skew. The design of a decimal counter with half-frequency division shows that by using the synchronous derived clock the counter has lower power dissipation as well as simpler combinational logic. Computer simulation shows 20% power saving.
基金The project is supported by Zhejiang Provincial Natural Science Fund of China
文摘The theory of differential current switches which applies to the design of multivaluedECL circuits is introduced.In this theory,the switching state of differential transistor pairand signal in ECL circuits are described by switching variables and quaternary signal variables,respectively.he connection operations between the two kinds of variables are introduced todescribe the action process between switching element and signal in the circuits.Based on thistheory,two kinds of interface circuits-2-4 encoder and 4-2 decoder are designed.The computersimulation for the designed circuits by using SPICE program confirms that both circuits havecorrect logic functions,desired DO transfer characteristics and transient characteristics.Theseinterface circuits are compatible with binary circuits in the integrated process,the power supplyequipment,the logic stage and the transient characteristic.Therefore,they can be used as input-output interface of the existing binary ECL integrated circuits so as to decrease the number ofpins of a chip and the connections between chips.
基金Project supported by the National Natural Science Fund of China
文摘Based on transmission function theory,the synthesis technique for multivaluedCMOS circuits is discussed.By comparing the CMOS circuits based on transmission functiontheory with the T gate,it is shown that their action principles are identical.Based on it,thesynthesis method for multivalued CMOS circuits with many variables by using function decom-position is proposed.
