Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbre...Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbreak of the War of Resistance Against Japanese Aggression(1931-1945),thus testing Baldwin’s theory of“the Great Convergence”in which developing countries are empowered by information and communication technologies.Based on panel data of 1858-1937,we found that wired telegraph access had a significantly positive effect,as well as a long-term growth effect,on the entry of industrial enterprises.Our mechanism analysis indicates that wired telegraph access accelerated early-stage industrialization in localities by encouraging market integration,human capital accumulation,and auxiliary commercial organizations.Only a few countries firmly asserted their telegraph sovereignty and set up their own workforce educational system during telegraph adoption.This explains why the Great Convergence arising from technology importation only occurred in a small number of countries.Our findings contribute to understanding the source of China’s modern industrial progress,as well as why global inequities remain.展开更多
Wired drill pipe（WDP）technology is one of the most promising data acquisition technologies in today s oil and gas industry.For the first time it allows sensors to be positioned along the drill string which enables c...Wired drill pipe（WDP）technology is one of the most promising data acquisition technologies in today s oil and gas industry.For the first time it allows sensors to be positioned along the drill string which enables collecting and transmitting valuable data not only from the bottom hole assembly（BHA）,but also along the entire length of the wellbore to the drill floor.The technology has received industry acceptance as a viable alternative to the typical logging while drilling（LWD）method.Recently more and more WDP applications can be found in the challenging drilling environments around the world,leading to many innovations to the industry.Nevertheless most of the data acquired from WDP can be noisy and in some circumstances of very poor quality.Diverse factors contribute to the poor data quality.Most common sources include mis-calibrated sensors,sensor drifting,errors during data transmission,or some abnormal conditions in the well,etc.The challenge of improving the data quality has attracted more and more focus from many researchers during the past decade.This paper has proposed a promising solution to address such challenge by making corrections of the raw WDP data and estimating unmeasurable parameters to reveal downhole behaviors.An advanced data processing method,data validation and reconciliation（DVR）has been employed,which makes use of the redundant data from multiple WDP sensors to filter/remove the noise from the measurements and ensures the coherence of all sensors and models.Moreover it has the ability to distinguish the accurate measurements from the inaccurate ones.In addition,the data with improved quality can be used for estimating some crucial parameters in the drilling process which are unmeasurable in the first place,hence provide better model calibrations for integrated well planning and realtime operations.展开更多
It is difficult to find the projectile when people want to get the penetration data in a hard recovery method,so a recovery system of penetration data is designed based on an ejection mode from the projectile base and...It is difficult to find the projectile when people want to get the penetration data in a hard recovery method,so a recovery system of penetration data is designed based on an ejection mode from the projectile base and a method of wired transmission,at the same time,the system was sealed with a designed sealing device,the working principle of which was introduced.Using Fluent as the simulation platform,the transient pressure of seal cavity was simulated based on the change of chamber pressure,and steady-state pressure of seal clearance and seal cavity were simulated based on the maximum chamber pressure.The sealing performance was tested by apressure test system.The results of simulation and experiment show that the maximum pressure of seal cavity is 139.4kPa when the maximum chamber pressure is 242.9MPa and the maximum temperature of gunpowder explosive gas is2 166.5K,so the sealing performance can be assured.The sealing device can be taken as a reference in sealing research on gunpowder gas at the bottom of projection.展开更多
For wired local area networks(LANs),their effectiveness and invulnerability are very critical.It is extraordinarily significant to evaluate the network performance effectively in the design of a reasonable network top...For wired local area networks(LANs),their effectiveness and invulnerability are very critical.It is extraordinarily significant to evaluate the network performance effectively in the design of a reasonable network topology and the performance improvement of the networks.However,there are many factors affecting the performance of the networks,and the relation among them is also complicated.How to evaluate the performance of the wired LANs more accurately has been a heavy challenge in the network research.In order to solve the problem,this paper presents a performance evaluation method that evaluates the effectiveness and invulnerability of the wired LANs.Compared to traditional statistical methods,it has the distinct advantage of being able to handle several dependent variables simultaneously and tolerates the measurement errors among these independent variables and dependent variables.Finally,the rationality and validity of this method are verified by the extensive experimental simulation.展开更多
The previous research on administration of the transmission capacity in the wired/ wireless ATM networks only focuses on wired part or wireless part. There are very few people do the work extending to the links associ...The previous research on administration of the transmission capacity in the wired/ wireless ATM networks only focuses on wired part or wireless part. There are very few people do the work extending to the links associating with handoff in the whole network. This paper develops the algorithms of transmission capacity administration on the link connecting the base station and base station controller (including the air interface of the base station) and the VPs among the base station controllers in the wired/ wireless ATM networks, which adapt to the traffic state of each service in every cellular cell to allocate (provision) transmission capacity and to reserve handoff guard capacity on these links, respectively. By simulating and analyzing the performance of the algorithm, it is found that it does well for the multimedia communication in which the transmission capacity requirement of each service may be widely different, so that the network bandwidth resource can be used efficiently.展开更多
Communication engineering is often referred to as "information engineering", which itself is an important branch of electronic engineering, in the environment of the information age, communication engineerin...Communication engineering is often referred to as "information engineering", which itself is an important branch of electronic engineering, in the environment of the information age, communication engineering as an important medium of information transmission, its construction has practical and far-reaching positive significance for the development of the country and society. Based on the importance of communication, improve the quality of data transmission speed of communication engineering, obviously is a path in the field of communication in the future and most important, and the application of optical fiber cable communication technology can effectively realize the data transmission speed and quality in communication engineering, information interaction under the information age speed and productivity are directly related. Therefore, the research on the application of fiber optic wired communication technology can lay a solid information foundation for the future development of our country to a certain extent, and it will have a huge impact in the field of information engineering and other fields.展开更多
Mathematical investigations of the dynamic response of buried systems to thermal and/or electromagnetic stimulation continues to be of great importance. The size of such systems can range from the microelectronic scal...Mathematical investigations of the dynamic response of buried systems to thermal and/or electromagnetic stimulation continues to be of great importance. The size of such systems can range from the microelectronic scale to large underground structures. Stimulation can occur from unwanted electromagnetic signals entering the buried system, and for assessing the operating state of a buried system that is not usually physically accessible. In both cases detecting damage or status can be accomplished by examining the time dependence of the resultant surface temperature. This study shows how to determine surface temperature for a hypothetical thermal-plus-systems using a combination of Fourier-space and Laplace-time transform techniques. The hypothetical model can be generalized from scaling the relevant relationships.展开更多
Recent fossil fuel shortages and global warming related problems have caused a substantial shift from internal combustion engine vehicles towards EVs.This paper explores the thorough review of battery charging infrast...Recent fossil fuel shortages and global warming related problems have caused a substantial shift from internal combustion engine vehicles towards EVs.This paper explores the thorough review of battery charging infrastructure from wired connection to on-road wireless charging for an EV.The initial part of the paper deals with the wired charging and its power electronics infrastructure.The later portion deals with the wireless charging where both static and On-Road types are discussed.Furthermore,various aspects of wireless power transfer are also discussed.The Market scenario and future growth prospects are reviewed and presented in last section of the paper.展开更多
Based on comprehensive observations of 20 wire icing events during winter from 2019 to 2021,we investigated the characteristics of the icing properties,the atmospheric boundary layer structure,the raindrop size distri...Based on comprehensive observations of 20 wire icing events during winter from 2019 to 2021,we investigated the characteristics of the icing properties,the atmospheric boundary layer structure,the raindrop size distribution,and their associated effects on the ice accretion mechanism in the mountainous region of Southwest China.The maximum ice weight was positively correlated with the duration of ice accretion in the mountainous area.The duration of precipitation accounted for less than 20%of the icing period in the mountainous area,with solid-phase hydrometeors being predominant.Icing events,dominated by freezing rain(FR)and mixed rain–graupel(more than 70%),were characterized by glaze or highdensity mixed icing.The relationship between the melting energy and refreezing energy reflected the distribution characteristics of the proportion of FR under mixed-phase precipitation.The intensity of the warm layer and the dominant precipitation phase significantly affected the variations in the microphysical properties of FR.The melting of large dry snowflakes significantly contributed to FR in the mountainous areas,resulting in smaller generalized intercepts and larger mass-weighted mean diameters in the presence of a stronger warm layer.Under a weaker warm layer,the value of the massweighted mean diameter was significantly smaller because of the inability of large solid particles to melt.Finally,FR in the mountainous area dominated the ice weight during the rapid ice accumulation period.A numerical simulation of FR icing on wires effectively revealed the evolution of disaster-causing icing in mountainous areas.展开更多
The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully ci...The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),respectively.With the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire deposits.Microstructure characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α phases.The mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and discussed.The mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat treatment.No fracture occurred within the interfacial area,further suggesting the robust interface.The findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.展开更多
SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+...SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.展开更多
The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the micr...The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the microstructure feature,texture evolution,mechanical properties,and electrical conductivity of ultrafine wires ranging fromΦ361μm toΦ18μm is performed.Specially,the microstructure feature and texture type covering the whole longitudinal section of ultrafine wires are elaborately characterized.The results show that the average lamella thickness decreases from 1.63μm to 102 nm during the drawing process.Whereas,inhomogeneous texture evolution across different wire sections was observed.The main texture types of copper wires are comprised of<111>,<001>and<112>orientations.Specifically,the peripheral region is primarily dominated by<111>and<112>,while the central region is dominated by<001>and<111>.As the drawing strain increases,the volume fraction of hard orientation<111>with low Schmid factor increases,where notably higher fraction of<111>is resulted from the consumption of<112>and<001>for the wire ofΦ18μm.For drawn copper wire of 18μm,superior properties are obtained with a tensile strength of 729.8 MPa and an electrical conductivity of 86.9%IACS.Furthermore,it is found that grain strengthening,dislocation strengthening,and texture strengthening are three primary strengthening mechanisms of drawn copper wire,while the dislocation density is the main factor on the reducing of conductivity.展开更多
The Kirschner wire(K-wire)is widely used in orthopedic external fixation due to its versatility and clinical effectiveness.However,a significant challenge associated with its use is the potential for bacterial migrati...The Kirschner wire(K-wire)is widely used in orthopedic external fixation due to its versatility and clinical effectiveness.However,a significant challenge associated with its use is the potential for bacterial migration,subsequent infection,and dislodgement as the wire penetrates the skin and bone.This study introduces a novel bioactive material,selenium/calcium silicate(Se/β-CS),achieved by integrating selenium-an essential trace element in the human body-into bioceramic calcium silicate.This integration was accomplished using a combined chemical co-deposition method and redox reaction.Furthermore,a uniform and controllable Se/β-CS coating was applied to the K-wire's surface using the Langmuir-Blodgett technique.This coating gradually releases active components-Si,Ca,and Se-that effectively eliminate bacterial infections and promote osteointegration.The findings of this study offer promising opportunities for the use of robust and multifunctional coating materials on implantable devices,particularly within the fields of orthopedics,transplantation,and surgery.展开更多
Simultaneously improving the strength and electrical conductivity of conducting metallic materials is of great significance,but it still remains a key challenge as the two properties are often mutually exclusive.In th...Simultaneously improving the strength and electrical conductivity of conducting metallic materials is of great significance,but it still remains a key challenge as the two properties are often mutually exclusive.In this study,we demonstrate a“<111>oriented fibrous grains with ultra-high aspect ratio”strategy for breaking such a conflict in Cu wire,which relies on the distinctive spatial distribution of grain boundaries and the highly consistent hard orientation to play their respective roles in suffering loading and conducting,thereby enabling a separate optimization of both strength and electrical conductivity.Therefore,a processing route was designed,involving directional solidification followed by large drawing deformation,to successfully construct fibrous grains with an ultra-high aspect ratio in 596.7 and ultra-high<111>texture proportion over 97%,which achieves Cu wire with a remarkable combination of yield strength in 482.3 MPa and electrical conductivity in 101.63%IACS.Finally,the mechanisms for high strength and high electrical conductivity were quantitatively discussed.展开更多
To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-coolin...To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.展开更多
The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or...The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or damage has always been a technical concern for production enterprises.Herein,a novel approach was developed for nondestructive detection of the average diameter at any given segment of a long copper wire by assessing the adsorption capacity of arginine on its surface.The amount of adsorbent on the surface of the copper wire exhibits a positive correlation with the area,which can be detected by extractive electrospray ionization mass spectrometry(EESI-MS)after online elution with ammonia.The experimental results demonstrated that the analysis can be completed within 15 min,with a good linear relationship between copper wires with different diameters and the adsorption capacity of arginine.The linear correlation coefficient R2was 0.995,the relative standard deviation was 1.10%-2.81%,and the detection limit reached 2.5μm(length of segment=4 cm),showing potential applications for facile measurement of the average diameter of various metal wires.展开更多
Inside a small shop on Lhasa's Barkhor Street,Namgyal Dorje,a young man born after 1995,delicately embeds copper wire across a wooden board.Although not born into a traditi onal Thangka pain ting family,Namgyal Do...Inside a small shop on Lhasa's Barkhor Street,Namgyal Dorje,a young man born after 1995,delicately embeds copper wire across a wooden board.Although not born into a traditi onal Thangka pain ting family,Namgyal Dorje uses copper wire and enamel glaze to push the boundaries of traditional Thangka art-both in innovation and accessibility.展开更多
Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cy...Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cyclic loads.A finite element model is devised,incorporating a singular armor wire,a rigid core,and a damaged sheath.To scrutinize the buckling progression and corresponding deformation,axial compression and bending cyclic loads are introduced.The observations reveal that a reduction in axial compression results in a larger number of cycles before buckling ensues and progressively shifts the buckling position toward the extrados and fixed end.Decreasing the bending radius precipitates a reduction in the buckling cycle number and minimizes the deformation in the armor wire.Furthermore,an empirical model is presented to predict the occurrence of birdcage buckling,providing a means to anticipate buckling events and to estimate the requisite number of cycles leading to buckling.展开更多
Ice cover on transmission lines is a significant issue that affects the safe operation of the power system.Accurate calculation of the thickness of wire icing can effectively prevent economic losses caused by ice disa...Ice cover on transmission lines is a significant issue that affects the safe operation of the power system.Accurate calculation of the thickness of wire icing can effectively prevent economic losses caused by ice disasters and reduce the impact of power outages on residents.However,under extreme weather conditions,strong instantaneous wind can cause tension sensors to fail,resulting in significant errors in the calculation of icing thickness in traditional mechanics-based models.In this paper,we propose a dynamic prediction model of wire icing thickness that can adapt to extreme weather environments.The model expands scarce raw data by the Wasserstein Generative Adversarial Network with Gradient Penalty(WGAN-GP)technique,records historical environmental information by a recurrent neural network,and evaluates the ice warning levels by a classifier.At each time point,the model diagnoses whether the current sensor failure is due to icing or strong winds.If it is determined that the wire is covered with ice,the icing thickness will be calculated after the wind-induced tension is removed from the ice-wind coupling tension.Our new model was evaluated using data from the power grid in an area with extreme weather.The results show that the proposed model has significant improvements in accuracy compared with traditional models.展开更多
Wire rope inspection robot is an important tool for wire rope condition monitoring and maintenance,which can accurately locate and judge the damage of wire rope.In addition,the wire rope inspection robot can also be u...Wire rope inspection robot is an important tool for wire rope condition monitoring and maintenance,which can accurately locate and judge the damage of wire rope.In addition,the wire rope inspection robot can also be used for cable inspection.First,the crawling structure and crawling mode of the wire rope inspection robot are reviewed,and the characteristics and existing problems of each crawling mode are analyzed separately.Next,the drive mode of the wire rope inspection robot is discussed,the types of commonly used motors are introduced,and the advantages and disadvantages of drive motors and the control modes are compared.Then,the method and principle of the non-destructive detection of the wire rope inspection robot are expounded,and the commonly used detection methods and existing deficiencies are compared.After that,the types of communication modes are compared and analyzed,and the types of wireless communication modes are also introduced.Finally,the current difficult problems of the wire rope inspection robot are summarized,and the future development trend of the wire rope inspection robot is prospected.展开更多
基金supported by the General Project of the National Social Science Fund of China(Grant No.NSSFC)“Research on the Changes of Modern East Asian Order”(Grant No.18BSS028).
文摘Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbreak of the War of Resistance Against Japanese Aggression(1931-1945),thus testing Baldwin’s theory of“the Great Convergence”in which developing countries are empowered by information and communication technologies.Based on panel data of 1858-1937,we found that wired telegraph access had a significantly positive effect,as well as a long-term growth effect,on the entry of industrial enterprises.Our mechanism analysis indicates that wired telegraph access accelerated early-stage industrialization in localities by encouraging market integration,human capital accumulation,and auxiliary commercial organizations.Only a few countries firmly asserted their telegraph sovereignty and set up their own workforce educational system during telegraph adoption.This explains why the Great Convergence arising from technology importation only occurred in a small number of countries.Our findings contribute to understanding the source of China’s modern industrial progress,as well as why global inequities remain.
基金supported by University of Stavanger, NorwaySINTEF,the Center for Integrated Operations in the Petroleum Industry and the management of National Oilwell Varco Intelli Serv
文摘Wired drill pipe（WDP）technology is one of the most promising data acquisition technologies in today s oil and gas industry.For the first time it allows sensors to be positioned along the drill string which enables collecting and transmitting valuable data not only from the bottom hole assembly（BHA）,but also along the entire length of the wellbore to the drill floor.The technology has received industry acceptance as a viable alternative to the typical logging while drilling（LWD）method.Recently more and more WDP applications can be found in the challenging drilling environments around the world,leading to many innovations to the industry.Nevertheless most of the data acquired from WDP can be noisy and in some circumstances of very poor quality.Diverse factors contribute to the poor data quality.Most common sources include mis-calibrated sensors,sensor drifting,errors during data transmission,or some abnormal conditions in the well,etc.The challenge of improving the data quality has attracted more and more focus from many researchers during the past decade.This paper has proposed a promising solution to address such challenge by making corrections of the raw WDP data and estimating unmeasurable parameters to reveal downhole behaviors.An advanced data processing method,data validation and reconciliation（DVR）has been employed,which makes use of the redundant data from multiple WDP sensors to filter/remove the noise from the measurements and ensures the coherence of all sensors and models.Moreover it has the ability to distinguish the accurate measurements from the inaccurate ones.In addition,the data with improved quality can be used for estimating some crucial parameters in the drilling process which are unmeasurable in the first place,hence provide better model calibrations for integrated well planning and realtime operations.
文摘It is difficult to find the projectile when people want to get the penetration data in a hard recovery method,so a recovery system of penetration data is designed based on an ejection mode from the projectile base and a method of wired transmission,at the same time,the system was sealed with a designed sealing device,the working principle of which was introduced.Using Fluent as the simulation platform,the transient pressure of seal cavity was simulated based on the change of chamber pressure,and steady-state pressure of seal clearance and seal cavity were simulated based on the maximum chamber pressure.The sealing performance was tested by apressure test system.The results of simulation and experiment show that the maximum pressure of seal cavity is 139.4kPa when the maximum chamber pressure is 242.9MPa and the maximum temperature of gunpowder explosive gas is2 166.5K,so the sealing performance can be assured.The sealing device can be taken as a reference in sealing research on gunpowder gas at the bottom of projection.
基金supported by the National Natural Science Foundations of China(Nos.61572435,61472305,61473222)the Ningbo Natural Science Foundations(Nos.2016A610035,2017A610119)+1 种基金the Complex Electronic System Simulation Laboratory(No.DXZT-JC-ZZ-2015015)the Joint Fund of China State Shipbuilding Corporation(No.6141B03010103)
文摘For wired local area networks(LANs),their effectiveness and invulnerability are very critical.It is extraordinarily significant to evaluate the network performance effectively in the design of a reasonable network topology and the performance improvement of the networks.However,there are many factors affecting the performance of the networks,and the relation among them is also complicated.How to evaluate the performance of the wired LANs more accurately has been a heavy challenge in the network research.In order to solve the problem,this paper presents a performance evaluation method that evaluates the effectiveness and invulnerability of the wired LANs.Compared to traditional statistical methods,it has the distinct advantage of being able to handle several dependent variables simultaneously and tolerates the measurement errors among these independent variables and dependent variables.Finally,the rationality and validity of this method are verified by the extensive experimental simulation.
文摘The previous research on administration of the transmission capacity in the wired/ wireless ATM networks only focuses on wired part or wireless part. There are very few people do the work extending to the links associating with handoff in the whole network. This paper develops the algorithms of transmission capacity administration on the link connecting the base station and base station controller (including the air interface of the base station) and the VPs among the base station controllers in the wired/ wireless ATM networks, which adapt to the traffic state of each service in every cellular cell to allocate (provision) transmission capacity and to reserve handoff guard capacity on these links, respectively. By simulating and analyzing the performance of the algorithm, it is found that it does well for the multimedia communication in which the transmission capacity requirement of each service may be widely different, so that the network bandwidth resource can be used efficiently.
文摘Communication engineering is often referred to as "information engineering", which itself is an important branch of electronic engineering, in the environment of the information age, communication engineering as an important medium of information transmission, its construction has practical and far-reaching positive significance for the development of the country and society. Based on the importance of communication, improve the quality of data transmission speed of communication engineering, obviously is a path in the field of communication in the future and most important, and the application of optical fiber cable communication technology can effectively realize the data transmission speed and quality in communication engineering, information interaction under the information age speed and productivity are directly related. Therefore, the research on the application of fiber optic wired communication technology can lay a solid information foundation for the future development of our country to a certain extent, and it will have a huge impact in the field of information engineering and other fields.
文摘Mathematical investigations of the dynamic response of buried systems to thermal and/or electromagnetic stimulation continues to be of great importance. The size of such systems can range from the microelectronic scale to large underground structures. Stimulation can occur from unwanted electromagnetic signals entering the buried system, and for assessing the operating state of a buried system that is not usually physically accessible. In both cases detecting damage or status can be accomplished by examining the time dependence of the resultant surface temperature. This study shows how to determine surface temperature for a hypothetical thermal-plus-systems using a combination of Fourier-space and Laplace-time transform techniques. The hypothetical model can be generalized from scaling the relevant relationships.
文摘Recent fossil fuel shortages and global warming related problems have caused a substantial shift from internal combustion engine vehicles towards EVs.This paper explores the thorough review of battery charging infrastructure from wired connection to on-road wireless charging for an EV.The initial part of the paper deals with the wired charging and its power electronics infrastructure.The later portion deals with the wireless charging where both static and On-Road types are discussed.Furthermore,various aspects of wireless power transfer are also discussed.The Market scenario and future growth prospects are reviewed and presented in last section of the paper.
基金funded by the National Natural Science Foundation of China(Grant No.42325503)the Hubei Provincial Natural Science Foundation and the Meteorological Innovation and Development Project of China(Grant Nos.2023AFD096 and 2022CFD122)+1 种基金the Natural Science Foundation of Wuhan(Grant No.2024020901030454)the Beijige Foundation of NJIAS(Grant No.BJG202304)。
文摘Based on comprehensive observations of 20 wire icing events during winter from 2019 to 2021,we investigated the characteristics of the icing properties,the atmospheric boundary layer structure,the raindrop size distribution,and their associated effects on the ice accretion mechanism in the mountainous region of Southwest China.The maximum ice weight was positively correlated with the duration of ice accretion in the mountainous area.The duration of precipitation accounted for less than 20%of the icing period in the mountainous area,with solid-phase hydrometeors being predominant.Icing events,dominated by freezing rain(FR)and mixed rain–graupel(more than 70%),were characterized by glaze or highdensity mixed icing.The relationship between the melting energy and refreezing energy reflected the distribution characteristics of the proportion of FR under mixed-phase precipitation.The intensity of the warm layer and the dominant precipitation phase significantly affected the variations in the microphysical properties of FR.The melting of large dry snowflakes significantly contributed to FR in the mountainous areas,resulting in smaller generalized intercepts and larger mass-weighted mean diameters in the presence of a stronger warm layer.Under a weaker warm layer,the value of the massweighted mean diameter was significantly smaller because of the inability of large solid particles to melt.Finally,FR in the mountainous area dominated the ice weight during the rapid ice accumulation period.A numerical simulation of FR icing on wires effectively revealed the evolution of disaster-causing icing in mountainous areas.
基金financially supported by the Agency for Science,Technology and Research(A*Star),Republic of Singapore,under the Aerospace Consortium Cycle 12“Characterization of the Effect of Wire and Powder Deposited Materials”(No.A1815a0078)。
文摘The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),respectively.With the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire deposits.Microstructure characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α phases.The mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and discussed.The mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat treatment.No fracture occurred within the interfacial area,further suggesting the robust interface.The findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.
文摘SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.
基金Project supported by“Unveiled the List of Commanders”Key Core Common Technology Projects of Ji’an,ChinaProject(LJKMZ20220591)supported by the Basic Scientific Research Project of the Education Department of Liaoning Province,ChinaProject(CSTB2023NSCQ-LZX0116)supported by the Natural Science Foundation Joint Fund for Innovation and Development Projects of Chongqing,China。
文摘The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the microstructure feature,texture evolution,mechanical properties,and electrical conductivity of ultrafine wires ranging fromΦ361μm toΦ18μm is performed.Specially,the microstructure feature and texture type covering the whole longitudinal section of ultrafine wires are elaborately characterized.The results show that the average lamella thickness decreases from 1.63μm to 102 nm during the drawing process.Whereas,inhomogeneous texture evolution across different wire sections was observed.The main texture types of copper wires are comprised of<111>,<001>and<112>orientations.Specifically,the peripheral region is primarily dominated by<111>and<112>,while the central region is dominated by<001>and<111>.As the drawing strain increases,the volume fraction of hard orientation<111>with low Schmid factor increases,where notably higher fraction of<111>is resulted from the consumption of<112>and<001>for the wire ofΦ18μm.For drawn copper wire of 18μm,superior properties are obtained with a tensile strength of 729.8 MPa and an electrical conductivity of 86.9%IACS.Furthermore,it is found that grain strengthening,dislocation strengthening,and texture strengthening are three primary strengthening mechanisms of drawn copper wire,while the dislocation density is the main factor on the reducing of conductivity.
基金financially supported by the foundation of the NMPA Key Laboratory for Quality Evaluation of Medical Protective and Implant Devices,the Shandong Provincial Natural Science Foundation(ZR2021MB096)to Huali Niethe Science and Technology Research Project of Shanghai Songjiang District Science and Technology Committee(No.2023SJKWGG063)+4 种基金the Medical Engineering Cross Research Project of Shanghai Jiaotong University(No.YG2022QN074)to Changping Wangthe National Nature Science Foundation of China(No.32371383)the Shanghai 2023“Science and Technology Innovation Action Plan”Biomedical Science and Technology Support Special Project(No.23S31900100)the Foundation of National Center for Translational Medicine(Shanghai)SHU Branch(No.SUITM-202411)to Siyu Nithe Research Center for the Industries of the Future at Westlake University and the Zhejiang Provincial Natural Science Foundation of China(No.2022XHSJJ003)for support.
文摘The Kirschner wire(K-wire)is widely used in orthopedic external fixation due to its versatility and clinical effectiveness.However,a significant challenge associated with its use is the potential for bacterial migration,subsequent infection,and dislodgement as the wire penetrates the skin and bone.This study introduces a novel bioactive material,selenium/calcium silicate(Se/β-CS),achieved by integrating selenium-an essential trace element in the human body-into bioceramic calcium silicate.This integration was accomplished using a combined chemical co-deposition method and redox reaction.Furthermore,a uniform and controllable Se/β-CS coating was applied to the K-wire's surface using the Langmuir-Blodgett technique.This coating gradually releases active components-Si,Ca,and Se-that effectively eliminate bacterial infections and promote osteointegration.The findings of this study offer promising opportunities for the use of robust and multifunctional coating materials on implantable devices,particularly within the fields of orthopedics,transplantation,and surgery.
基金supported by the National Natural Science Foundation of China(NSFC)under Grant Nos.52001313,52130002,52273322,and 52321001IMR Innovation Fund under Grant No.2023-PY05+3 种基金the Natural Science Foundation of Liaoning Province under Grant No.2022-MS-001the China Postdoctoral Science Foundation under Grant No.GZC20232740the Zhongke Technology Achievement Transfer and Transformation Center of Henan Province under Grant No.2024109the Joint Research Project between Chinese Academy of Sciences(CAS)under Grant No.174321KYSB20210002.
文摘Simultaneously improving the strength and electrical conductivity of conducting metallic materials is of great significance,but it still remains a key challenge as the two properties are often mutually exclusive.In this study,we demonstrate a“<111>oriented fibrous grains with ultra-high aspect ratio”strategy for breaking such a conflict in Cu wire,which relies on the distinctive spatial distribution of grain boundaries and the highly consistent hard orientation to play their respective roles in suffering loading and conducting,thereby enabling a separate optimization of both strength and electrical conductivity.Therefore,a processing route was designed,involving directional solidification followed by large drawing deformation,to successfully construct fibrous grains with an ultra-high aspect ratio in 596.7 and ultra-high<111>texture proportion over 97%,which achieves Cu wire with a remarkable combination of yield strength in 482.3 MPa and electrical conductivity in 101.63%IACS.Finally,the mechanisms for high strength and high electrical conductivity were quantitatively discussed.
基金financially supported by National Natural Science Foundation of China(Project No.51878156).
文摘To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.
基金supported by the National Natural Science Foundation of China(No.22422402)National Key Research and Development Program of China(No.2022YFF0705300)Key Research and Development Program of Jiangxi Province(No.20232BBG70004)。
文摘The performance and price of copper-based micro linear products are determined by the diameter uniformity.How to accurately detect the wire diameter of long-length copper based micro linear products without cutting or damage has always been a technical concern for production enterprises.Herein,a novel approach was developed for nondestructive detection of the average diameter at any given segment of a long copper wire by assessing the adsorption capacity of arginine on its surface.The amount of adsorbent on the surface of the copper wire exhibits a positive correlation with the area,which can be detected by extractive electrospray ionization mass spectrometry(EESI-MS)after online elution with ammonia.The experimental results demonstrated that the analysis can be completed within 15 min,with a good linear relationship between copper wires with different diameters and the adsorption capacity of arginine.The linear correlation coefficient R2was 0.995,the relative standard deviation was 1.10%-2.81%,and the detection limit reached 2.5μm(length of segment=4 cm),showing potential applications for facile measurement of the average diameter of various metal wires.
文摘Inside a small shop on Lhasa's Barkhor Street,Namgyal Dorje,a young man born after 1995,delicately embeds copper wire across a wooden board.Although not born into a traditi onal Thangka pain ting family,Namgyal Dorje uses copper wire and enamel glaze to push the boundaries of traditional Thangka art-both in innovation and accessibility.
基金financially supported by the National Natural Science Foundation of China(Grant No.52471301)the Fujian Province Transportation Science and Technology Project(Grant No.JC202302)the Zhejiang Provincial Natural Science Foundation of China(Grant No.LY24E090003).
文摘Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cyclic loads.A finite element model is devised,incorporating a singular armor wire,a rigid core,and a damaged sheath.To scrutinize the buckling progression and corresponding deformation,axial compression and bending cyclic loads are introduced.The observations reveal that a reduction in axial compression results in a larger number of cycles before buckling ensues and progressively shifts the buckling position toward the extrados and fixed end.Decreasing the bending radius precipitates a reduction in the buckling cycle number and minimizes the deformation in the armor wire.Furthermore,an empirical model is presented to predict the occurrence of birdcage buckling,providing a means to anticipate buckling events and to estimate the requisite number of cycles leading to buckling.
基金supported by the Science and Technology Project of State Grid Corporation of China(SGXJDK00GYJS2400035).
文摘Ice cover on transmission lines is a significant issue that affects the safe operation of the power system.Accurate calculation of the thickness of wire icing can effectively prevent economic losses caused by ice disasters and reduce the impact of power outages on residents.However,under extreme weather conditions,strong instantaneous wind can cause tension sensors to fail,resulting in significant errors in the calculation of icing thickness in traditional mechanics-based models.In this paper,we propose a dynamic prediction model of wire icing thickness that can adapt to extreme weather environments.The model expands scarce raw data by the Wasserstein Generative Adversarial Network with Gradient Penalty(WGAN-GP)technique,records historical environmental information by a recurrent neural network,and evaluates the ice warning levels by a classifier.At each time point,the model diagnoses whether the current sensor failure is due to icing or strong winds.If it is determined that the wire is covered with ice,the icing thickness will be calculated after the wind-induced tension is removed from the ice-wind coupling tension.Our new model was evaluated using data from the power grid in an area with extreme weather.The results show that the proposed model has significant improvements in accuracy compared with traditional models.
基金the National Natural Science Foundation of China(No.12072362)the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘Wire rope inspection robot is an important tool for wire rope condition monitoring and maintenance,which can accurately locate and judge the damage of wire rope.In addition,the wire rope inspection robot can also be used for cable inspection.First,the crawling structure and crawling mode of the wire rope inspection robot are reviewed,and the characteristics and existing problems of each crawling mode are analyzed separately.Next,the drive mode of the wire rope inspection robot is discussed,the types of commonly used motors are introduced,and the advantages and disadvantages of drive motors and the control modes are compared.Then,the method and principle of the non-destructive detection of the wire rope inspection robot are expounded,and the commonly used detection methods and existing deficiencies are compared.After that,the types of communication modes are compared and analyzed,and the types of wireless communication modes are also introduced.Finally,the current difficult problems of the wire rope inspection robot are summarized,and the future development trend of the wire rope inspection robot is prospected.
