Analyzing the dynamic response and calculating the tendon tension of the mooring system are necessary for the structural design of a tension leg platform （TLP）. The six-degree-of-freedom dynamic coupling responses a...Analyzing the dynamic response and calculating the tendon tension of the mooring system are necessary for the structural design of a tension leg platform （TLP）. The six-degree-of-freedom dynamic coupling responses and the mooring characteristics of TLP under random waves are studied by using a self-developed program. Results are verified by the 1：40 scaling factor model test conducted in the State Key Laboratory of Ocean Engineering at Shanghai JiaoTong University. The mean, range, and standard deviation of the numerical simulation and model test are compared. The influences of different sea states and wave approach angles on the dynamic response and tendon tension of the mooring system are investigated. The acceleration in the center and corner of the deck is forecasted.展开更多
This paper presents the test of a ship model for the design of a backward-bent duct oscillating water column type wave energy conversion system, to supply electric power for a light ship. This system suggests a new wa...This paper presents the test of a ship model for the design of a backward-bent duct oscillating water column type wave energy conversion system, to supply electric power for a light ship. This system suggests a new way to produce electric power automatically for large light ships.展开更多
The application of the vertical hoisting jack and wave motion compensation techniques to the salvage of an ancient sunken boat is introduced. The boat is wooden, loaded with cultural relics. It has been immersed at th...The application of the vertical hoisting jack and wave motion compensation techniques to the salvage of an ancient sunken boat is introduced. The boat is wooden, loaded with cultural relics. It has been immersed at the bottom of the South China Sea for more than 800 years. In order to protect the structure of the boat and the cultural relics inside to the largest extent, an open caisson is used to hold the sunken beat and the silts around before they are raised from the seabed all together as a whole. In the paper, first, the seakeeping model test of the system of the salvage barge and the open caisson is done to determine some important wave response parameters. And then a further experimental study of the ap- plication of the vertical hoisting jack and wave motion compensation scheme to the salvage of the sunken boat is carried out. In the model tests, the techniques of the integrative mechanic-electronic-hydraulic control, wave motion forecast and wave motion compensation are used to minimize the heave motion of the open caisson. The results of the model tests show that the heave motion of the open caisson can be reduced effectively by the use of the present method.展开更多
This paper presents the explosion cratering effects and their propagation laws of blast waves in dry standard sands using a 450 g-t geotechnical centrifuge apparatus.Ten centrifuge model tests were completed with vari...This paper presents the explosion cratering effects and their propagation laws of blast waves in dry standard sands using a 450 g-t geotechnical centrifuge apparatus.Ten centrifuge model tests were completed with various ranges of explosive mass,burial depth and centrifuge accelerations.Eleven accelerometers were installed to record the acceleration response in sand.The dimensions of the explosion craters were measured after the tests.The results demonstrated that the relationship between the dimensionless parameters of cratering efficiency and gravity scaled yield is a power regression function.Three specific function equations were obtained.The results are in general agreement with those obtained by other studies.A scaling law based on the combination of the π terms was used to fit the results of the ten model tests with a correlation coefficient of 0.931.The relationship can be conveniently used to predict the cratering effects in sand.The results also showed that the peak acceleration is a power increasing function of the acceleration level.An empirical exponent relation between the proportional peak acceleration and distance is proposed.The propagation velocity of blast waves is found to be ranged between 200 and 714 m/s.展开更多
-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model te...-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.展开更多
With the development of virtual test,the computation of the effect of different weather conditions on electromagnetic wave propagation is required in many simulation systems. Firstly,this paper presents a unique point...With the development of virtual test,the computation of the effect of different weather conditions on electromagnetic wave propagation is required in many simulation systems. Firstly,this paper presents a unique point of view for computing the electromagnetic wave attenuation ratio under different weather conditions by means of an independent electromagnetic wave propagation component that can be directly implemented in virtual test, and is easy to configure and easy to reuse. We present an analysis of the principles of electromagnetic wave propagation and the algorithms designed for realization of various propagation models within the electromagnetic wave propagation component. Secondly,this paper presents a use-case analysis and outlines the design of the component,verifies the developed models under various weather conditions,and obtains equivalent values as those obtained theoretically. Finally,we build a virtual test system,verify the system in different weather conditions,and again obtain equivalent values to those obtained theoretically. The algorithms in the electromagnetic wave propagation component are developed in the C language, which substantially improves the computational speed,and meets the real-time requirements of the virtual testing platform.展开更多
New version of SWAN model includes the wave diffraction effect which is the main improvement compared with the previous versions. Experimental data collected in the wave basin of the University of Delaware were used t...New version of SWAN model includes the wave diffraction effect which is the main improvement compared with the previous versions. Experimental data collected in the wave basin of the University of Delaware were used to test its performance. Wave heights were compared in the four cases （with different wave energies and directional spreading spectra）. The results agreed well with the measurements, especially for the broad directional spectra cases. The effect of wave diffraction was analyzed by switching on/off the corresponding tenn. By introducing the diffraction term, the distributions of wave height and wave direction were smoothed, especially obvious for the narrow spectrum cases. Compared with the calculations without diffraction, the model with diffraction effect gave better results.展开更多
Conducting model experiments is an effective and reliable way in the investigation of ship hydrodynamic and hydroelastic behaviors. A survey of model testing techniques for ship hydroelasticity and its prospect are pr...Conducting model experiments is an effective and reliable way in the investigation of ship hydrodynamic and hydroelastic behaviors. A survey of model testing techniques for ship hydroelasticity and its prospect are presented in this paper. The research highlights with respect to ship hydroelasticity and key points in model testing are summarized at first. Then testing techniques including laboratory tank test and full-scale sea trial are reviewed, and both their advantages and disadvantages are analyzed comprehensively. Based on the conventional testing approaches, a state-of-the-art testing approach which includes performing tests using large-scale model at sea is proposed. Furthermore, recommendations towards the further development of ship hydroelasticity tests are forecasted and discussed.展开更多
The propagation laws of in-seam seismic wave in coal seam in differeut situations are studied by means of in-seam seismic simulatiou tests. Some valuable conclusions are obtained, which are signiricant in guiding in-s...The propagation laws of in-seam seismic wave in coal seam in differeut situations are studied by means of in-seam seismic simulatiou tests. Some valuable conclusions are obtained, which are signiricant in guiding in-seam seismic prospecting in the future.展开更多
The pile, as an important foundation style, is being used in engineering practice. Defects of different types and damages of different degrees easily occur during the process of pile construction. So, dietecting defec...The pile, as an important foundation style, is being used in engineering practice. Defects of different types and damages of different degrees easily occur during the process of pile construction. So, dietecting defects of the pile is very important. As so far, there are some difficult problems in pile defect detection. Based on stress wave theory, some of these typical difficult problems were studied through model tests. The analyses of the test results are carried out and some significant results of the low-strain method are obtained, when a pile has a gradually-decreasing crosssection part, the amplitude of the reflective signal originating from the defect is dependent on the decreasing value of the rate of crosssection β. No apparent signal reflected from the necking appeares on the velocity response curve when the value of β is less than about 3. 5 %.展开更多
A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course ...A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.展开更多
In this study, systematic physical model tests were performed to investigate the wave forces on the twin-plate breakwater under irregular waves. Based on the experimental results, the effects of the relative plate wid...In this study, systematic physical model tests were performed to investigate the wave forces on the twin-plate breakwater under irregular waves. Based on the experimental results, the effects of the relative plate width B/L,wave height Hs/D and incident angle θ0 on the wave forces were analyzed and discussed. The results showed that:(1) The envelopes of the total wave pressure were generally symmetrical along the direction of plate width under the incident angles(θ0) being 0°, 15°, 30°, 45° and 60°. In particular, the envelopes of wave pressure atθ0=30° were larger than all other cases.(2) The synchronous pressure distribution of the breakwater under oblique wave action was more complicated comparing to the normal incident waves.(3) Based on data analysis, an empirical formula was obtained to estimate the total vertical force of the twin-plate breakwater.This empirical formula can be a good reference for the design basis of engineering applications under specified wave conditions.展开更多
-A composite pipeline is defined as a pipeline system composed of one big pipe and one or several small pipes. Based on the theory of wave- current interaction and physical model test, the hydrodynamic characteristics...-A composite pipeline is defined as a pipeline system composed of one big pipe and one or several small pipes. Based on the theory of wave- current interaction and physical model test, the hydrodynamic characteristics of the submarine composite pipeline in wave-current coexisting field (both regular and irregular waves) are investigated. The so-called 'modified diameter method' is used for analyzing the in-fine hydrodynamic coefficients of the composite pipeline, which are well related to KC number. The comparison of test data for regular and irregular waves shows that in the region of 90 > KC> 20, the results in these two cases can be unified. The effect of water depth is analyzed in details. The relationships between CD, CM and KC , which are based on the results of present research, may be used as a reference in engineering design.展开更多
In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For th...In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For the same fracture density, the variations of the velocity and amplitude of the primary wave and shear wave parallel and perpendicular to the fracture were observed by altering the diameter （scale） of the penny-shaped fracture disk. The model test indicated that an increase of fracture scale increased the velocity and amplitude of the primary wave by about 2%. When the shear wave propagated parallel to the fracture, the velocity of the fast shear wave hardly changed, while the velocity of slow shear wave increased by 2.6% with increasing fracture scale. The results indicated that an increase of fracture scale would reduce the degree of anisotropy of the shear wave. The amplitudes of slow shear waves propagating parallel and perpendicular to fractures decreased with increasing fracture scale.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.40906049 and 51309123)
文摘Analyzing the dynamic response and calculating the tendon tension of the mooring system are necessary for the structural design of a tension leg platform （TLP）. The six-degree-of-freedom dynamic coupling responses and the mooring characteristics of TLP under random waves are studied by using a self-developed program. Results are verified by the 1：40 scaling factor model test conducted in the State Key Laboratory of Ocean Engineering at Shanghai JiaoTong University. The mean, range, and standard deviation of the numerical simulation and model test are compared. The influences of different sea states and wave approach angles on the dynamic response and tendon tension of the mooring system are investigated. The acceleration in the center and corner of the deck is forecasted.
文摘This paper presents the test of a ship model for the design of a backward-bent duct oscillating water column type wave energy conversion system, to supply electric power for a light ship. This system suggests a new way to produce electric power automatically for large light ships.
文摘The application of the vertical hoisting jack and wave motion compensation techniques to the salvage of an ancient sunken boat is introduced. The boat is wooden, loaded with cultural relics. It has been immersed at the bottom of the South China Sea for more than 800 years. In order to protect the structure of the boat and the cultural relics inside to the largest extent, an open caisson is used to hold the sunken beat and the silts around before they are raised from the seabed all together as a whole. In the paper, first, the seakeeping model test of the system of the salvage barge and the open caisson is done to determine some important wave response parameters. And then a further experimental study of the ap- plication of the vertical hoisting jack and wave motion compensation scheme to the salvage of the sunken boat is carried out. In the model tests, the techniques of the integrative mechanic-electronic-hydraulic control, wave motion forecast and wave motion compensation are used to minimize the heave motion of the open caisson. The results of the model tests show that the heave motion of the open caisson can be reduced effectively by the use of the present method.
基金supported by the National Natural Science Foundation of China (No. 50779073)the Program Foundation of the China Institute of Water Resources and Hydropower Research (IWHR)(No. YANJI ZD0710)
文摘This paper presents the explosion cratering effects and their propagation laws of blast waves in dry standard sands using a 450 g-t geotechnical centrifuge apparatus.Ten centrifuge model tests were completed with various ranges of explosive mass,burial depth and centrifuge accelerations.Eleven accelerometers were installed to record the acceleration response in sand.The dimensions of the explosion craters were measured after the tests.The results demonstrated that the relationship between the dimensionless parameters of cratering efficiency and gravity scaled yield is a power regression function.Three specific function equations were obtained.The results are in general agreement with those obtained by other studies.A scaling law based on the combination of the π terms was used to fit the results of the ten model tests with a correlation coefficient of 0.931.The relationship can be conveniently used to predict the cratering effects in sand.The results also showed that the peak acceleration is a power increasing function of the acceleration level.An empirical exponent relation between the proportional peak acceleration and distance is proposed.The propagation velocity of blast waves is found to be ranged between 200 and 714 m/s.
文摘-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61201305)
文摘With the development of virtual test,the computation of the effect of different weather conditions on electromagnetic wave propagation is required in many simulation systems. Firstly,this paper presents a unique point of view for computing the electromagnetic wave attenuation ratio under different weather conditions by means of an independent electromagnetic wave propagation component that can be directly implemented in virtual test, and is easy to configure and easy to reuse. We present an analysis of the principles of electromagnetic wave propagation and the algorithms designed for realization of various propagation models within the electromagnetic wave propagation component. Secondly,this paper presents a use-case analysis and outlines the design of the component,verifies the developed models under various weather conditions,and obtains equivalent values as those obtained theoretically. Finally,we build a virtual test system,verify the system in different weather conditions,and again obtain equivalent values to those obtained theoretically. The algorithms in the electromagnetic wave propagation component are developed in the C language, which substantially improves the computational speed,and meets the real-time requirements of the virtual testing platform.
基金This study was supported by the National Key Basic Research Project of China (Grant No2002CB412403)the Research Project in Science and Technology Commission of Shanghai Municipality,China (Grant No04DZ12049)
文摘New version of SWAN model includes the wave diffraction effect which is the main improvement compared with the previous versions. Experimental data collected in the wave basin of the University of Delaware were used to test its performance. Wave heights were compared in the four cases （with different wave energies and directional spreading spectra）. The results agreed well with the measurements, especially for the broad directional spectra cases. The effect of wave diffraction was analyzed by switching on/off the corresponding tenn. By introducing the diffraction term, the distributions of wave height and wave direction were smoothed, especially obvious for the narrow spectrum cases. Compared with the calculations without diffraction, the model with diffraction effect gave better results.
基金the National Natural Science Foundations of China(Nos.51679049 and 51079034)
文摘Conducting model experiments is an effective and reliable way in the investigation of ship hydrodynamic and hydroelastic behaviors. A survey of model testing techniques for ship hydroelasticity and its prospect are presented in this paper. The research highlights with respect to ship hydroelasticity and key points in model testing are summarized at first. Then testing techniques including laboratory tank test and full-scale sea trial are reviewed, and both their advantages and disadvantages are analyzed comprehensively. Based on the conventional testing approaches, a state-of-the-art testing approach which includes performing tests using large-scale model at sea is proposed. Furthermore, recommendations towards the further development of ship hydroelasticity tests are forecasted and discussed.
文摘The propagation laws of in-seam seismic wave in coal seam in differeut situations are studied by means of in-seam seismic simulatiou tests. Some valuable conclusions are obtained, which are signiricant in guiding in-seam seismic prospecting in the future.
文摘The pile, as an important foundation style, is being used in engineering practice. Defects of different types and damages of different degrees easily occur during the process of pile construction. So, dietecting defects of the pile is very important. As so far, there are some difficult problems in pile defect detection. Based on stress wave theory, some of these typical difficult problems were studied through model tests. The analyses of the test results are carried out and some significant results of the low-strain method are obtained, when a pile has a gradually-decreasing crosssection part, the amplitude of the reflective signal originating from the defect is dependent on the decreasing value of the rate of crosssection β. No apparent signal reflected from the necking appeares on the velocity response curve when the value of β is less than about 3. 5 %.
基金supported by the National Natural Science Foundation of China(50879090)the Key Research Program of Hydrodynamics of China(9140A14030712JB11044)
文摘A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.
基金The National Natural Science Foundation of China under contract Nos 51079025 and 11272079the Research Funds from State Key Laboratory of Coastal and Offshore Engineering under contract No.LY1602
文摘In this study, systematic physical model tests were performed to investigate the wave forces on the twin-plate breakwater under irregular waves. Based on the experimental results, the effects of the relative plate width B/L,wave height Hs/D and incident angle θ0 on the wave forces were analyzed and discussed. The results showed that:(1) The envelopes of the total wave pressure were generally symmetrical along the direction of plate width under the incident angles(θ0) being 0°, 15°, 30°, 45° and 60°. In particular, the envelopes of wave pressure atθ0=30° were larger than all other cases.(2) The synchronous pressure distribution of the breakwater under oblique wave action was more complicated comparing to the normal incident waves.(3) Based on data analysis, an empirical formula was obtained to estimate the total vertical force of the twin-plate breakwater.This empirical formula can be a good reference for the design basis of engineering applications under specified wave conditions.
文摘-A composite pipeline is defined as a pipeline system composed of one big pipe and one or several small pipes. Based on the theory of wave- current interaction and physical model test, the hydrodynamic characteristics of the submarine composite pipeline in wave-current coexisting field (both regular and irregular waves) are investigated. The so-called 'modified diameter method' is used for analyzing the in-fine hydrodynamic coefficients of the composite pipeline, which are well related to KC number. The comparison of test data for regular and irregular waves shows that in the region of 90 > KC> 20, the results in these two cases can be unified. The effect of water depth is analyzed in details. The relationships between CD, CM and KC , which are based on the results of present research, may be used as a reference in engineering design.
文摘In fractured reservoir beds, fracture characteristics affect seismic wave response. Fractured models based on the Hudson＇s fractured medium theory were constructed in our laboratory by a backfilling technique. For the same fracture density, the variations of the velocity and amplitude of the primary wave and shear wave parallel and perpendicular to the fracture were observed by altering the diameter （scale） of the penny-shaped fracture disk. The model test indicated that an increase of fracture scale increased the velocity and amplitude of the primary wave by about 2%. When the shear wave propagated parallel to the fracture, the velocity of the fast shear wave hardly changed, while the velocity of slow shear wave increased by 2.6% with increasing fracture scale. The results indicated that an increase of fracture scale would reduce the degree of anisotropy of the shear wave. The amplitudes of slow shear waves propagating parallel and perpendicular to fractures decreased with increasing fracture scale.
