To fully utilize the resources provided by optical fiber networks,a cross-band quantum light source generating photon pairs,where one photon in a pair is at C band and the other is at O band,is proposed in this work.T...To fully utilize the resources provided by optical fiber networks,a cross-band quantum light source generating photon pairs,where one photon in a pair is at C band and the other is at O band,is proposed in this work.This source is based on spontaneous four-wave mixing(SFWM)in a piece of shallow-ridge silicon waveguide.Theoretical analysis shows that the waveguide dispersion could be tailored by adjusting the ridge width,enabling broadband photon pair generation by SFWM across C band and O band.The spontaneous Raman scattering(SpRS)in silicon waveguides is also investigated experimentally.It shows that there are two regions in the spectrum of generated photons from SpRS,which could be used to achieve cross-band photon pair generation.A chip of shallow-ridge silicon waveguide samples with different ridge widths has been fabricated,through which cross-band photon pair generation is demonstrated experimentally.The experimental results show that the source can be achieved using dispersion-optimized shallow-ridge silicon waveguides.This cross-band quantum light source provides a way to develop new fiber-based quantum communication functions utilizing both C band and O band and extends applications of quantum networks.展开更多
To address the complex seismic response of long tunnels longitudinally crossing heterogeneous geological formations,this study proposes a three-dimensional SV-wave oblique-incidence input method that accounts for the ...To address the complex seismic response of long tunnels longitudinally crossing heterogeneous geological formations,this study proposes a three-dimensional SV-wave oblique-incidence input method that accounts for the initial disturbance of the wave field induced by geological heterogeneity.The method transforms equivalent twodimensional free-field responses into equivalent nodal forces applied at the boundaries of a 3D numerical model.A longitudinally heterogeneous“hard-soft-hard”site and tunnel system is established,in which the surrounding rock is modeled using the Mohr-Coulomb constitutive law,while the concrete lining is described by the concrete damaged plasticity model.The deformation patterns and failure mechanisms of the site-tunnel system under SV-wave excitation are systematically investigated.The results indicate that seismic damage under SV-wave loading is mainly concentrated in the soft-rock region.Failure of the soft surrounding rock induces pronounced sliding of the overlying hard rock,and the tunnel suffers severe damage due to the combined effects of soft-rock failure and strong ground shaking.Parametric analyses further show that smaller impedance ratios,larger soft-rock widths,and larger incidence angles significantly intensify the seismic response of the tunnel.The findings of this study provide valuable insights for the seismic design of tunnels crossing longitudinally heterogeneous geological formations.展开更多
Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analyt...Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analytical solution to determine the longitudinal mechanical responses of tunnels subjected to the combined effects of seismic waves and strike-slip faulting.Adopting the elastic springbeam model,the seismic waves are modelled as shear horizontal(SH)waves and the fault dislocation follows an S-shaped pattern;the superposition principle for free-fielddisplacements caused by both effects is assumed.In addition,the transmission and reflectionof seismic waves at the fault-rock geological interface and the tangential contact conditions at the tunnel-rock interface are considered.The analytical model is validated against numerical simulations,confirmingits accuracy in calculating tunnel responses.Moreover,a parametric study is conducted to evaluate the impact of key factors,including fault displacement,fault zone width,fault dip angle,earthquake frequency,rock conditions,tunnel lining stiffness,and tangential contact conditions,on tunnel responses.Compared with each effect alone,the combined effects of seismic waves and strike-slip faulting significantlychange the tunnel deformation and internal forces,leading to increased tunnel responses,especially within the fault zone and near the fault-rock interfaces.Depending on specificparameters,tunnel responses can be classifiedinto seismic-dominated,faulting-dominated,and seismic-faulting coupled responses on the basis of the relative contributions of each effect.The proposed analytical solution can be applied to quickly predict the longitudinal mechanical behaviour of tunnels under such combined effects in engineering applications.展开更多
The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,an...The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,and the evolution characteristics and underlying mechanisms are elucidated.The development of damage in the new damage region begins after complete unloading of the incident shock wave and is further enhanced when the tensile stress arrives later.The damage evolution is completely controlled by the expansion-merging of He bubbles,without nucleation–growth of voids.This new damage region can be divided into two sections,each of which exhibits a unique dominant mechanism.The damage in the section closer to the loading side is due to the reverse velocity gradient formed after complete unloading of the incident shock wave,depending on the rate of decrease and the amplitude of the initial peak pressure.A high initial peak pressure that can lead to melting of material near the loading side is a necessary condition for the formation of the new damage region,since a significant reverse velocity gradient can only be established if melting occurs.The dominant mechanism in the section distant from the loading side is the action of tensile stress,associated with the profile of the incident shock wave upon reaching the free surface,which determines the material phase near the free surface.Moreover,the presence of He bubbles is another critical factor for formation of the new damage region,which does not occur in pure Al samples.展开更多
Laser-driven inertial confinement fusion(ICF)is an important experimental platform for high-energy-density physics research under extreme conditions.In ICF research,high-quality shock waves are key to fusion energy re...Laser-driven inertial confinement fusion(ICF)is an important experimental platform for high-energy-density physics research under extreme conditions.In ICF research,high-quality shock waves are key to fusion energy release.The velocity interferometer system for any reflector(VISAR)is the most important diagnostic technique for measuring quantities such as shock wave and particle velocities with high precision and high spatiotemporal resolution.This paper provides a detailed introduction to the various configurations of VISAR on 10 and 100 kJ-level laser facilities in China,including Line VISAR,Dual-Axis VISAR,Wide-Angle VISAR,and Compressed Ultrafast Photography-VISAR.Recent advances and applications of VISAR diagnostics at these laser facilities are presented,and the future trend of development of high-spatiotemporal-resolution velocity diagnostic technology is described.展开更多
Most existing path planning approaches rely on discrete expansions or localized heuristics that can lead to extended re-planning,inefficient detours,and limited adaptability to complex obstacle distributions.These iss...Most existing path planning approaches rely on discrete expansions or localized heuristics that can lead to extended re-planning,inefficient detours,and limited adaptability to complex obstacle distributions.These issues are particularly pronounced when navigating cluttered or large-scale environments that demand both global coverage and smooth trajectory generation.To address these challenges,this paper proposes a Wave Water Simulator(WWS)algorithm,leveraging a physically motivated wave equation to achieve inherently smooth,globally consistent path planning.In WWS,wavefront expansions naturally identify safe corridors while seamlessly avoiding local minima,and selective corridor focusing reduces computational overhead in large or dense maps.Comprehensive simulations and real-world validations-encompassing both indoor and outdoor scenarios-demonstrate that WWS reduces path length by 2%-13%compared to conventional methods,while preserving gentle curvature and robust obstacle clearance.Furthermore,WWS requires minimal parameter tuning across diverse domains,underscoring its broad applicability to warehouse robotics,field operations,and autonomous service vehicles.These findings confirm that the proposed wave-based framework not only bridges the gap between local heuristics and global coverage but also sets a promising direction for future extensions toward dynamic obstacle scenarios and multi-agent coordination.展开更多
Studies of wave-current interactions are vital for the safe design of structures.Regular waves in the presence of uniform,linear shear,and quadratic shear currents are explored by the High-Level Green-Naghdi model in ...Studies of wave-current interactions are vital for the safe design of structures.Regular waves in the presence of uniform,linear shear,and quadratic shear currents are explored by the High-Level Green-Naghdi model in this paper.The five-point central difference method is used for spatial discretization,and the fourth-order Adams predictor-corrector scheme is employed for marching in time.The domain-decomposition method is applied for the wave-current generation and absorption.The effects of currents on the wave profile and velocity field are examined under two conditions:the same velocity of currents at the still-water level and the constant flow volume of currents.Wave profiles and velocity fields demonstrate substantial differences in three types of currents owing to the diverse vertical distribution of current velocity and vorticity.Then,loads on small-scale vertical cylinders subjected to regular waves and three types of background currents with the same flow volume are investigated.The maximum load intensity and load fluctuation amplitude in uniform,linear shear,and quadratic shear currents increase sequentially.The stretched superposition method overestimates the maximum load intensity and load fluctuation amplitude in opposing currents and underestimates these values in following currents.The stretched superposition method obtains a poor approximation for strong nonlinear waves,particularly in the case of the opposing quadratic shear current.展开更多
Microwave ablation(MWA)is a minimally invasive technique for treating hepatic tumors,necessitating precise monitoring to ensure treatment efficacy and minimize damage to surrounding tissues.This study explores the pot...Microwave ablation(MWA)is a minimally invasive technique for treating hepatic tumors,necessitating precise monitoring to ensure treatment efficacy and minimize damage to surrounding tissues.This study explores the potential of photoacoustic imaging(PAI)in monitoring MWA by examining ex vivo porcine liver tissues.In this study,a comprehensive analysis of photoacoustic signals was performed to compare the main lobe width(MLW)between ablated and normal regions in porcine liver tissue.Histological staining with succinate dehydrogenase(SDH)and shear wave elastography(SWE)were employed to validate the changes in tissue elasticity after ablation.The analysis demonstrated a notable reduction in the MLW of the average A-lines in ablated tissues compared to nonablated regions(p<0.01).This reduction,attributed to increased tissue density and enhanced elasticity,indicates accelerated sound propagation in thermally ablated areas,which then serves as a critical parameter for mapping tissue characteristics.The reconstruction of the MLW distribution successfully delineated the ablated regions,and was consistent with the results of SDH staining and SWE.In addition,MLW-based imaging exhibited higher spatial resolution compared to SWE.Incorporating MLW analysis into PAI may be a promising strategy to improve the accuracy and effectiveness of MWA monitoring in clinical settings.展开更多
Significant wave period is an important parameter in coastal and offshore engineering design.Traditional spectral wave models do not directly calculate this parameter,which means that it needs to be estimated from the...Significant wave period is an important parameter in coastal and offshore engineering design.Traditional spectral wave models do not directly calculate this parameter,which means that it needs to be estimated from the spectral periods using empirical formulas.The wave energy period is one of the wave periods directly output by many wave models and is often used in studies of wave energy.This study investigated the relationship between significant wave period and wave energy period using wave data measured at three stations in the coastal waters of China.The observations recorded at these stations in the South China Sea,the East China Sea,and the Bohai Sea covered a wide range of surface wave conditions.Analysis indicated that the ratio of significant wave period to wave energy period is closely related to the Goda peakedness parameter of the wave spectra.Therefore,we proposed an empirical formula in which significant wave period is a function of wave energy period and the Goda peakedness parameter.Evaluation results showed that the performance of this formula is substantially better than that of fitting formulas that use constant coefficients.展开更多
The manipulation of intense shock waves to either attenuate or enhance damage has long been a key goal in the domain of impact dynamics.Effective methods for such manipulation,however,remain elusive owing to the wide ...The manipulation of intense shock waves to either attenuate or enhance damage has long been a key goal in the domain of impact dynamics.Effective methods for such manipulation,however,remain elusive owing to the wide spectrum and irreversible destructive nature of intense shock waves.This work proposes a novel approach for actively controlling intense shock waves in solids,inspired by the principles of optical and explosive lenses.Specifically,by designing a shock wave convex lens composed of a low-shock-impedance material embedded in a high-shock-impedance matrix,we prove the feasibility of transforming a planar shock into a spherically converging shock.This is based on oblique shock theory,according to which shock waves pass through an oblique interface and then undergo deflection.Both experimental and simulation results demonstrate that,as expected,the obtained local spherical shock wave has a wavefront that is nearly perfectly spherical and uniform in pressure.Thus,this work proves the possibility of generating spherical shock waves using plate-impact experiments and highlights the potential of further exploration of the manipulation of shock waves in solids.It also contributes an innovative perspective for both armor penetration technologies and shock wave mitigation strategies.展开更多
Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,...Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,was mainly used to investigate Rossby waves under the combined effects of the generalizedβ-effect and the basic flow effect.The derivative expansion method has the advantage of capturing the multi-scalecharacteristics of wave processes simultaneously.In the case where the perturbation expansion is independentof secular terms,the nonlinear equations describing the amplitude evolution of nonlinear waves were derived,such as the Korteweg-de Vries equation,the Boussinesq equation and Zakharov-Kuznetsov equation.Both quali-tative and quantitative analyses indicate that the generalizedβ-effect is the key factor inducing the evolution ofRossby solitary waves.展开更多
Biochar and biochar composites are versatile materials that can be used in many applications.In this study,biochar was prepared from sawdust and combined with the yttrium iron garnet(YIG)nanocrystal to investigate the...Biochar and biochar composites are versatile materials that can be used in many applications.In this study,biochar was prepared from sawdust and combined with the yttrium iron garnet(YIG)nanocrystal to investigate the shielding effectiveness of the composite structure.Firstly,the effect of the pyrolysis temperature on the shielding effectiveness of biochar was investigated.Secondly,biochars combined with YIG nanocrystals with different contents and shielding effectiveness of the composites were investigated.The electromagnetic effectiveness of the samples was investigated within the X band(8-12 GHz).The findings indicate that biochar demonstrates enhanced absorption properties with elevated pyrolysis temperatures.Biochars demonstrated an approximate 40 d B shielding effectiveness,while YIG exhibited approximately 7 d B,corresponding to absorption at 8 GHz.However,the combination of biochar and YIG exhibited exceptional absorption,reaching 67.12 d B at 8 GHz.展开更多
Numerical simulations and theoretical models are developed in this paper for the Detonation-Wave/Boundary-Layer Interactions(DWBLIs)under reflections.Transient flow fields demonstrate the highly non-stationarity of th...Numerical simulations and theoretical models are developed in this paper for the Detonation-Wave/Boundary-Layer Interactions(DWBLIs)under reflections.Transient flow fields demonstrate the highly non-stationarity of the DWBLIs when Mach Reflection(MR)occur,and subsequent analyses show that the subsonic region introduced by the boundary layer exacerbates the instability.Further quantitative analyses show that viscosity has little effect on propulsive performance and the separation wave can be considered as an oblique detonation wave.Influence parameters to DWBLIs such as combustion chamber height,incoming Mach number,equivalence ratio,and inlet channel length are categorized and studied.Besides simulations,theoretical analytical modeling is established for Regular Reflection(RR)and MR of DWBLIs.Multiple formulas for the separation zone length are obtained according to the mass conservation under different transformation type between inviscid and viscid reflections.Comparison with the numerical simulations verifies the validity of the model and it can be further generalized to the curved DWBLIs.The developed model makes the theoretical solution process of DWBLIs possible and provides the key foundation for further analysis and solution.展开更多
Using high-resolution observations,mesoscale simulations,and idealized experiments,this study investigates the mechanisms governing an episode of orographic convection initiation(CI)during the North China Heavy Rainfa...Using high-resolution observations,mesoscale simulations,and idealized experiments,this study investigates the mechanisms governing an episode of orographic convection initiation(CI)during the North China Heavy Rainfall Experiment.On 4 August 2024,repeated CI occurred over the eastern slopes of the Taihang Mountains in the late afternoon,subsequently enhancing an upstream downhill convective storm.Wind profiler radar data and dense automatic weather stations reveal that CI was supported by strengthening southeasterly upslope winds.These winds primarily resulted from the migration of the mountain-plain solenoid and the mountainward-propagating outflow from a convective cold pool over the plain,with sensitivity experiments showing the latter contributed roughly 22%of the wind strength.The upslope flows gradually transported unstable air from the plain to the slope,fostering CI.Mesoscale simulations further highlight the key role of orographic waves near the mountain ridge,which generated strong downslope winds.The near-surface convergence between downslope and upslope flows,combined with wave-induced divergence aloft,produced deep ascent over the slope.Removing mountain ridges weakened wave strength and reduced downslope wind speeds by~8 m s^(-1).Without orographic heating in the idealized simulation(i.e.,no mountain-plain solenoid),only strong wave descent occurred below 2km,inhibiting CI.These findings underscore the critical interplay among plain convection,orographic waves,and the mountain-plain solenoid,offering new insight into the processes controlling orographic CI in North China.展开更多
Residents living near drill-and-blast tunnels often experience disturbances from blasting operations.This motivates us to investigate the characteristics of airblasts and resulting noise through on-site monitoring at ...Residents living near drill-and-blast tunnels often experience disturbances from blasting operations.This motivates us to investigate the characteristics of airblasts and resulting noise through on-site monitoring at three tunnels.The research focuses on both the temporal evolution and spatial propagation of airblasts.Temporal analysis,including peak overpressure(POp),positive duration(PD),and Fourier main frequency(MF),emphasizes the relationship between airblast characteristics,blasting delays,and rock grade.It shows that airblast bandwidths are typically in the range of 3e200 Hz,with noise levels exceeding 130 dB,which is comparable to jet engines and rocket launch.Spatial propagation analysis reveals the impact of tunnel space on airblast propagation.Although POp and PD typically decrease with distance inside the tunnel,wave superposition can cause increased overpressure and prolonged durations at far-field distances(above 60 m kg^(-1/3)).Outside the tunnel,sound radiation was influenced by azimuth and was basically determined by sound power d an often-overlooked factor.To address the anisotropic propagation of airblasts,a predictive model was proposed for external noise levels,considering variables like distance,azimuth angle,initial sound power,and wave expansion.Validated by tests,this model successfully unifies data from three studies,helping to explain and predict airblast disturbances near tunnels.展开更多
This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlyin...This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlying physical mechanism. Specifically, for the simplified case of constant stratospheric N^(2), the refractive index square of planetary waves has a theoretical tendency to increase first and then decrease with an increased N^(2), whereas the group velocity weakens. Mechanistically, this behavior can be understood as an intensified suppression of vertical isentropic surface displacement caused by meridional heat transport of planetary waves under strong N^(2) conditions. Observational analysis corroborates this finding, demonstrating a reduction in the vertical-propagation velocity of waves with increased N^(2). A linear, quasi- geostrophic, mid-latitude beta-plane model with a constant background westerly wind and a prescribed N^(2) applicable to the stratosphere is used to obtain analytic solutions. In this model, the planetary waves are initiated by steady energy influx from the lower boundary. The analysis indicates that under strong N^(2) conditions, the amplitude of planetary waves can be sufficiently increased by the effective energy convergence due to the slowing vertical energy transfer, resulting in a streamfunction response in this model that contains more energy. For N^(2) with a quasi-linear vertical variation, the results bear a resemblance to the constant case, except that the wave amplitude and oscillating frequency show some vertical variations.展开更多
Adhesively bonded joints are widely used in modern lightweight structures due to their high strengthto-weight ratio and design flexibility.However,the reliable non-destructive evaluation of bond integrity remains a si...Adhesively bonded joints are widely used in modern lightweight structures due to their high strengthto-weight ratio and design flexibility.However,the reliable non-destructive evaluation of bond integrity remains a significant challenge.This study presents a numerical investigation of adhesively bonded joints with different adhesive properties using ultrasonic guided waves.The main focus of the investigation is to evaluate the feasibility of using guided waves to assess bond integrity,particularly for detecting challenging weak bonds.For this purpose,a theoretical analysis of dispersion curves was conducted,revealing that the S0 Lamb wave mode is significantly sensitive to variations in adhesive properties in the 300-700 kHz frequency range.Finite element modelling was used to analyse the propagation of guided waves in two scenarios:an adhesively bonded aluminum structure and a more complex configuration-adhesively bonded lap joints.The Short-Time Fourier Transform(STFT)was used to process the obtained results and determine the group velocities of guided waves.By analysing the group velocity characteristics,their dependence on the adhesive properties was identified.In the first scenario,a clear separation of S0 modes from A0 modes was observed in the STFT analysis,with a decrease in group velocity as adhesive stiffness increased.For the more complex lap joint scenario,the separation between A0 and S0 modes was less distinct.However,the analysis of the average group velocity shows a dependence of average group velocity on adhesive properties.This is similar to the first scenario.There is a decrease in average group velocity as adhesive stiffness increases.The results obtained demonstrate that guided wavebased methods have a high potential for non-destructive evaluation of adhesively bonded structures,including the detection of weak bonds.展开更多
Waves are important physical phenomena in an ocean,and their accurate prediction is essential for ocean engineering,maritime traffic,and marine early warning systems.This study focuses on the Qinhuangdao Sea area loca...Waves are important physical phenomena in an ocean,and their accurate prediction is essential for ocean engineering,maritime traffic,and marine early warning systems.This study focuses on the Qinhuangdao Sea area located in the Bohai Sea,China.Herein,we use on-site wind data to correct the reanalysis wind data obtained from the European Centre for Medium-Range Weather Forecasts(ECMWF),improving the accuracy of boundary conditions.Then,we use the Simulating WAves Nearshore(SWAN)model to simulate the regional wave field over time.A regional wave-parameter prediction model is then developed using a limited number of sampled data(covering only 2 years,2020–2021);the model is based on the Whale Optimization Algorithm(WOA),convolutional neural networks(CNNs),and long short-term memory(LSTM)neural networks.WOA is used to optimize the CNN and LSTM framework;in this framework,CNN extracts spatial features,and the LSTM network captures temporal features,enabling accurate short and long-term predictions of wave height,period,and direction.The experimental results showed that despite the small sample size,the model achieves a goodness of fit of 0.9957 for wave height prediction,0.9973 for period,and 0.9749 for wave direction in short-term forecasting.As the prediction step size increases,the accuracy of the model decreases.When the prediction step size reaches 9 h,the root mean square error for the prediction of wave height,period,and direction increases to 0.2060 m,0.4582 s,and32.5358°,respectively.The reliability and applicability of the model are further validated by the experimental results.Our findings highlighted the potential of the developed model in operational wave forecasting,even with a limited number of sampled data.展开更多
To address increasing electromagnetic interference and pollution problems,this study proposes a component regulation strategy.Hollow magnetic microspheres derived from metal-organic frameworks(MOFs)were incorporated i...To address increasing electromagnetic interference and pollution problems,this study proposes a component regulation strategy.Hollow magnetic microspheres derived from metal-organic frameworks(MOFs)were incorporated into carbon fibers(Co@CNFs)through electrospinning technology,forming a sugar-gourd-like heterostructure.This structure promotes the synergy between dielectric and magnetic losses.The full utilization of multi-component synergy and the well-designed heterogeneous interfaces enhances interfacial polarization and optimizes the balance between impedance and high loss.The hollow structure of magnetic microspheres facilitates multiple scattering of electromagnetic waves(EMW).Additionally,the change of heat treatment temperature offers a viable method to adjust the dielectric properties of composites.The results indicate that the Co@CNFs exhibit outstanding EMW attenuation capability,even at an ultralow filler loading of 3 wt%,achieving a reflection loss of-39.7 dB and an effective absorption bandwidth of 7.6 GHz.This study demonstrates the effectiveness of component regulation and offers a viable approach for lightweight,high-performance EMW absorption materials.展开更多
The rapid development of electronic devices and communication technologies has resulted in increasingly severe electromagnetic-wave(EW)pollution.Efficient EW absorption(EWA)materials are essential to mitigate their im...The rapid development of electronic devices and communication technologies has resulted in increasingly severe electromagnetic-wave(EW)pollution.Efficient EW absorption(EWA)materials are essential to mitigate their impact and ensure human safety in modern society.Fe-based EWA materials have garnered significant attention owing to their cost-effectiveness,high saturation magnetization,and superior magnetic loss capabilities.This review begins with an introduction to Fe-based EWA materials,followed by a brief description of their EWA mechanisms.Various pristine Fe-based absorbers,such as carbonyl iron powder,ferrite-based materials,Fe-based alloys,Fe-based high-entropy alloys(HEAs),and Fe-based layered ternary transition-metal borides,have been systematically reviewed.Key strategies to enhance the performance of Fe-based composite absorbers,including doping,in-situ oxidation,porous structuring,and composite construction,are critically discussed.Finally,the review presents a summary and future perspectives in this field,highlighting the synergy between Fe-based and high-entropy materials in advancing next-generation EWA for applications in stealth technology,wear-able electronics,and harsh environments.展开更多
基金supported by the Quantum Science and Technology-National Science and Technology Major Project (Grant No.2024ZD0302502 for WZ)the National Natural Science Foundation of China(Grant No.92365210 for WZ)+1 种基金Tsinghua Initiative Scientific Research Program (for WZ)the project of Tsinghua University-Zhuhai Huafa Industrial Share Company Joint Institute for Architecture Optoelectronic Technologies (JIAOT,for YH)。
文摘To fully utilize the resources provided by optical fiber networks,a cross-band quantum light source generating photon pairs,where one photon in a pair is at C band and the other is at O band,is proposed in this work.This source is based on spontaneous four-wave mixing(SFWM)in a piece of shallow-ridge silicon waveguide.Theoretical analysis shows that the waveguide dispersion could be tailored by adjusting the ridge width,enabling broadband photon pair generation by SFWM across C band and O band.The spontaneous Raman scattering(SpRS)in silicon waveguides is also investigated experimentally.It shows that there are two regions in the spectrum of generated photons from SpRS,which could be used to achieve cross-band photon pair generation.A chip of shallow-ridge silicon waveguide samples with different ridge widths has been fabricated,through which cross-band photon pair generation is demonstrated experimentally.The experimental results show that the source can be achieved using dispersion-optimized shallow-ridge silicon waveguides.This cross-band quantum light source provides a way to develop new fiber-based quantum communication functions utilizing both C band and O band and extends applications of quantum networks.
基金supported by the National Key Research and Development Program(Grant No.2024YFF0508203)the National Natural Science Foundation of China(Grant No.52378475)the Science and Technology Innovation Special Project of Xiongan New Area,National Key R&D Program(Grant No.2025XAGG0056)。
文摘To address the complex seismic response of long tunnels longitudinally crossing heterogeneous geological formations,this study proposes a three-dimensional SV-wave oblique-incidence input method that accounts for the initial disturbance of the wave field induced by geological heterogeneity.The method transforms equivalent twodimensional free-field responses into equivalent nodal forces applied at the boundaries of a 3D numerical model.A longitudinally heterogeneous“hard-soft-hard”site and tunnel system is established,in which the surrounding rock is modeled using the Mohr-Coulomb constitutive law,while the concrete lining is described by the concrete damaged plasticity model.The deformation patterns and failure mechanisms of the site-tunnel system under SV-wave excitation are systematically investigated.The results indicate that seismic damage under SV-wave loading is mainly concentrated in the soft-rock region.Failure of the soft surrounding rock induces pronounced sliding of the overlying hard rock,and the tunnel suffers severe damage due to the combined effects of soft-rock failure and strong ground shaking.Parametric analyses further show that smaller impedance ratios,larger soft-rock widths,and larger incidence angles significantly intensify the seismic response of the tunnel.The findings of this study provide valuable insights for the seismic design of tunnels crossing longitudinally heterogeneous geological formations.
基金supported by the National Natural Science Foundation of China(No.41941018)Shanghai Gaofeng Discipline Construction Funding.
文摘Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analytical solution to determine the longitudinal mechanical responses of tunnels subjected to the combined effects of seismic waves and strike-slip faulting.Adopting the elastic springbeam model,the seismic waves are modelled as shear horizontal(SH)waves and the fault dislocation follows an S-shaped pattern;the superposition principle for free-fielddisplacements caused by both effects is assumed.In addition,the transmission and reflectionof seismic waves at the fault-rock geological interface and the tangential contact conditions at the tunnel-rock interface are considered.The analytical model is validated against numerical simulations,confirmingits accuracy in calculating tunnel responses.Moreover,a parametric study is conducted to evaluate the impact of key factors,including fault displacement,fault zone width,fault dip angle,earthquake frequency,rock conditions,tunnel lining stiffness,and tangential contact conditions,on tunnel responses.Compared with each effect alone,the combined effects of seismic waves and strike-slip faulting significantlychange the tunnel deformation and internal forces,leading to increased tunnel responses,especially within the fault zone and near the fault-rock interfaces.Depending on specificparameters,tunnel responses can be classifiedinto seismic-dominated,faulting-dominated,and seismic-faulting coupled responses on the basis of the relative contributions of each effect.The proposed analytical solution can be applied to quickly predict the longitudinal mechanical behaviour of tunnels under such combined effects in engineering applications.
基金supported by the National Natural Science Foundation of China(Grant No.12172063).
文摘The damage evolution of polycrystalline Al with helium(He)bubbles under strongly decaying shock waves is studied by molecular dynamics simulations.A new damage region is observed near the loading side of the sample,and the evolution characteristics and underlying mechanisms are elucidated.The development of damage in the new damage region begins after complete unloading of the incident shock wave and is further enhanced when the tensile stress arrives later.The damage evolution is completely controlled by the expansion-merging of He bubbles,without nucleation–growth of voids.This new damage region can be divided into two sections,each of which exhibits a unique dominant mechanism.The damage in the section closer to the loading side is due to the reverse velocity gradient formed after complete unloading of the incident shock wave,depending on the rate of decrease and the amplitude of the initial peak pressure.A high initial peak pressure that can lead to melting of material near the loading side is a necessary condition for the formation of the new damage region,since a significant reverse velocity gradient can only be established if melting occurs.The dominant mechanism in the section distant from the loading side is the action of tensile stress,associated with the profile of the incident shock wave upon reaching the free surface,which determines the material phase near the free surface.Moreover,the presence of He bubbles is another critical factor for formation of the new damage region,which does not occur in pure Al samples.
基金supported by the National Key Laboratory of Plasma Physics,Laser Fusion Research Center,China Academy of Engineering Physics under the National Natural Science Foundation of China(Grant Nos.12127810 and 12475242).
文摘Laser-driven inertial confinement fusion(ICF)is an important experimental platform for high-energy-density physics research under extreme conditions.In ICF research,high-quality shock waves are key to fusion energy release.The velocity interferometer system for any reflector(VISAR)is the most important diagnostic technique for measuring quantities such as shock wave and particle velocities with high precision and high spatiotemporal resolution.This paper provides a detailed introduction to the various configurations of VISAR on 10 and 100 kJ-level laser facilities in China,including Line VISAR,Dual-Axis VISAR,Wide-Angle VISAR,and Compressed Ultrafast Photography-VISAR.Recent advances and applications of VISAR diagnostics at these laser facilities are presented,and the future trend of development of high-spatiotemporal-resolution velocity diagnostic technology is described.
文摘Most existing path planning approaches rely on discrete expansions or localized heuristics that can lead to extended re-planning,inefficient detours,and limited adaptability to complex obstacle distributions.These issues are particularly pronounced when navigating cluttered or large-scale environments that demand both global coverage and smooth trajectory generation.To address these challenges,this paper proposes a Wave Water Simulator(WWS)algorithm,leveraging a physically motivated wave equation to achieve inherently smooth,globally consistent path planning.In WWS,wavefront expansions naturally identify safe corridors while seamlessly avoiding local minima,and selective corridor focusing reduces computational overhead in large or dense maps.Comprehensive simulations and real-world validations-encompassing both indoor and outdoor scenarios-demonstrate that WWS reduces path length by 2%-13%compared to conventional methods,while preserving gentle curvature and robust obstacle clearance.Furthermore,WWS requires minimal parameter tuning across diverse domains,underscoring its broad applicability to warehouse robotics,field operations,and autonomous service vehicles.These findings confirm that the proposed wave-based framework not only bridges the gap between local heuristics and global coverage but also sets a promising direction for future extensions toward dynamic obstacle scenarios and multi-agent coordination.
基金Supported by the Development and Application Project of Ship CAE Software.
文摘Studies of wave-current interactions are vital for the safe design of structures.Regular waves in the presence of uniform,linear shear,and quadratic shear currents are explored by the High-Level Green-Naghdi model in this paper.The five-point central difference method is used for spatial discretization,and the fourth-order Adams predictor-corrector scheme is employed for marching in time.The domain-decomposition method is applied for the wave-current generation and absorption.The effects of currents on the wave profile and velocity field are examined under two conditions:the same velocity of currents at the still-water level and the constant flow volume of currents.Wave profiles and velocity fields demonstrate substantial differences in three types of currents owing to the diverse vertical distribution of current velocity and vorticity.Then,loads on small-scale vertical cylinders subjected to regular waves and three types of background currents with the same flow volume are investigated.The maximum load intensity and load fluctuation amplitude in uniform,linear shear,and quadratic shear currents increase sequentially.The stretched superposition method overestimates the maximum load intensity and load fluctuation amplitude in opposing currents and underestimates these values in following currents.The stretched superposition method obtains a poor approximation for strong nonlinear waves,particularly in the case of the opposing quadratic shear current.
基金supported by the National Natural Science Foundation of China(82427808,61875085)the Jiangsu Provincial University Natural Science Foundation(25KJB413004)+1 种基金the Nanjing Health Science and Technology Development Foundation(ZKX24043)the Fundamental Research Funds for the Central Universities(NJ2024029).
文摘Microwave ablation(MWA)is a minimally invasive technique for treating hepatic tumors,necessitating precise monitoring to ensure treatment efficacy and minimize damage to surrounding tissues.This study explores the potential of photoacoustic imaging(PAI)in monitoring MWA by examining ex vivo porcine liver tissues.In this study,a comprehensive analysis of photoacoustic signals was performed to compare the main lobe width(MLW)between ablated and normal regions in porcine liver tissue.Histological staining with succinate dehydrogenase(SDH)and shear wave elastography(SWE)were employed to validate the changes in tissue elasticity after ablation.The analysis demonstrated a notable reduction in the MLW of the average A-lines in ablated tissues compared to nonablated regions(p<0.01).This reduction,attributed to increased tissue density and enhanced elasticity,indicates accelerated sound propagation in thermally ablated areas,which then serves as a critical parameter for mapping tissue characteristics.The reconstruction of the MLW distribution successfully delineated the ablated regions,and was consistent with the results of SDH staining and SWE.In addition,MLW-based imaging exhibited higher spatial resolution compared to SWE.Incorporating MLW analysis into PAI may be a promising strategy to improve the accuracy and effectiveness of MWA monitoring in clinical settings.
基金The National Natural Science Foundation of China under contract No.41821004the Basic Scientific Fund for National Public Research Institutes of China under contract No.2020Q08the Fund of Laoshan Laboratory under contract No.LSKJ202201600.
文摘Significant wave period is an important parameter in coastal and offshore engineering design.Traditional spectral wave models do not directly calculate this parameter,which means that it needs to be estimated from the spectral periods using empirical formulas.The wave energy period is one of the wave periods directly output by many wave models and is often used in studies of wave energy.This study investigated the relationship between significant wave period and wave energy period using wave data measured at three stations in the coastal waters of China.The observations recorded at these stations in the South China Sea,the East China Sea,and the Bohai Sea covered a wide range of surface wave conditions.Analysis indicated that the ratio of significant wave period to wave energy period is closely related to the Goda peakedness parameter of the wave spectra.Therefore,we proposed an empirical formula in which significant wave period is a function of wave energy period and the Goda peakedness parameter.Evaluation results showed that the performance of this formula is substantially better than that of fitting formulas that use constant coefficients.
基金supported by the National Key R&D Program of China(Grant No.2021YFB3802303)the National Natural Science Foundation of China(Grant Nos.12302493 and 12525211).
文摘The manipulation of intense shock waves to either attenuate or enhance damage has long been a key goal in the domain of impact dynamics.Effective methods for such manipulation,however,remain elusive owing to the wide spectrum and irreversible destructive nature of intense shock waves.This work proposes a novel approach for actively controlling intense shock waves in solids,inspired by the principles of optical and explosive lenses.Specifically,by designing a shock wave convex lens composed of a low-shock-impedance material embedded in a high-shock-impedance matrix,we prove the feasibility of transforming a planar shock into a spherically converging shock.This is based on oblique shock theory,according to which shock waves pass through an oblique interface and then undergo deflection.Both experimental and simulation results demonstrate that,as expected,the obtained local spherical shock wave has a wavefront that is nearly perfectly spherical and uniform in pressure.Thus,this work proves the possibility of generating spherical shock waves using plate-impact experiments and highlights the potential of further exploration of the manipulation of shock waves in solids.It also contributes an innovative perspective for both armor penetration technologies and shock wave mitigation strategies.
文摘Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,was mainly used to investigate Rossby waves under the combined effects of the generalizedβ-effect and the basic flow effect.The derivative expansion method has the advantage of capturing the multi-scalecharacteristics of wave processes simultaneously.In the case where the perturbation expansion is independentof secular terms,the nonlinear equations describing the amplitude evolution of nonlinear waves were derived,such as the Korteweg-de Vries equation,the Boussinesq equation and Zakharov-Kuznetsov equation.Both quali-tative and quantitative analyses indicate that the generalizedβ-effect is the key factor inducing the evolution ofRossby solitary waves.
基金support provided by the Center for Fabrication and Application of Electronic Materials at Dokuz Eylül University,Türkiye。
文摘Biochar and biochar composites are versatile materials that can be used in many applications.In this study,biochar was prepared from sawdust and combined with the yttrium iron garnet(YIG)nanocrystal to investigate the shielding effectiveness of the composite structure.Firstly,the effect of the pyrolysis temperature on the shielding effectiveness of biochar was investigated.Secondly,biochars combined with YIG nanocrystals with different contents and shielding effectiveness of the composites were investigated.The electromagnetic effectiveness of the samples was investigated within the X band(8-12 GHz).The findings indicate that biochar demonstrates enhanced absorption properties with elevated pyrolysis temperatures.Biochars demonstrated an approximate 40 d B shielding effectiveness,while YIG exhibited approximately 7 d B,corresponding to absorption at 8 GHz.However,the combination of biochar and YIG exhibited exceptional absorption,reaching 67.12 d B at 8 GHz.
基金support of the National Natural Science Foundation of China(Nos.U20A2069,U21B6003,12302389 and 12472337)the Advanced Aero-Power Innovation Workstation,China(No.HKCX2024-01-017)。
文摘Numerical simulations and theoretical models are developed in this paper for the Detonation-Wave/Boundary-Layer Interactions(DWBLIs)under reflections.Transient flow fields demonstrate the highly non-stationarity of the DWBLIs when Mach Reflection(MR)occur,and subsequent analyses show that the subsonic region introduced by the boundary layer exacerbates the instability.Further quantitative analyses show that viscosity has little effect on propulsive performance and the separation wave can be considered as an oblique detonation wave.Influence parameters to DWBLIs such as combustion chamber height,incoming Mach number,equivalence ratio,and inlet channel length are categorized and studied.Besides simulations,theoretical analytical modeling is established for Regular Reflection(RR)and MR of DWBLIs.Multiple formulas for the separation zone length are obtained according to the mass conservation under different transformation type between inviscid and viscid reflections.Comparison with the numerical simulations verifies the validity of the model and it can be further generalized to the curved DWBLIs.The developed model makes the theoretical solution process of DWBLIs possible and provides the key foundation for further analysis and solution.
基金supported by the National Key Research and Development Program of China(Grant No.2024YFC3013003)the National Natural Science Foundation of China(Grant Nos.424B2033 and 42475002)+3 种基金projects supported by the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(Grant Nos.SML2024SP035,SML2024SP012,311024001)the Guangdong Project of Basic and Applied Basic Research(Grant Nos.2024A1515510005 and2025A1515011974)the Key Innovation Team of the China Meteorological Administration(Grant No.CMA2023ZD08)the State Key Laboratory of Severe Weather Meteorological Science and Technology(Grant No.2025QZA10)。
文摘Using high-resolution observations,mesoscale simulations,and idealized experiments,this study investigates the mechanisms governing an episode of orographic convection initiation(CI)during the North China Heavy Rainfall Experiment.On 4 August 2024,repeated CI occurred over the eastern slopes of the Taihang Mountains in the late afternoon,subsequently enhancing an upstream downhill convective storm.Wind profiler radar data and dense automatic weather stations reveal that CI was supported by strengthening southeasterly upslope winds.These winds primarily resulted from the migration of the mountain-plain solenoid and the mountainward-propagating outflow from a convective cold pool over the plain,with sensitivity experiments showing the latter contributed roughly 22%of the wind strength.The upslope flows gradually transported unstable air from the plain to the slope,fostering CI.Mesoscale simulations further highlight the key role of orographic waves near the mountain ridge,which generated strong downslope winds.The near-surface convergence between downslope and upslope flows,combined with wave-induced divergence aloft,produced deep ascent over the slope.Removing mountain ridges weakened wave strength and reduced downslope wind speeds by~8 m s^(-1).Without orographic heating in the idealized simulation(i.e.,no mountain-plain solenoid),only strong wave descent occurred below 2km,inhibiting CI.These findings underscore the critical interplay among plain convection,orographic waves,and the mountain-plain solenoid,offering new insight into the processes controlling orographic CI in North China.
基金supported by the Shenzhen Stability Support Plan(Grant No.20231122095154003)National Natural Science Foundation of China(Grant Nos.51978671 and 52422807).
文摘Residents living near drill-and-blast tunnels often experience disturbances from blasting operations.This motivates us to investigate the characteristics of airblasts and resulting noise through on-site monitoring at three tunnels.The research focuses on both the temporal evolution and spatial propagation of airblasts.Temporal analysis,including peak overpressure(POp),positive duration(PD),and Fourier main frequency(MF),emphasizes the relationship between airblast characteristics,blasting delays,and rock grade.It shows that airblast bandwidths are typically in the range of 3e200 Hz,with noise levels exceeding 130 dB,which is comparable to jet engines and rocket launch.Spatial propagation analysis reveals the impact of tunnel space on airblast propagation.Although POp and PD typically decrease with distance inside the tunnel,wave superposition can cause increased overpressure and prolonged durations at far-field distances(above 60 m kg^(-1/3)).Outside the tunnel,sound radiation was influenced by azimuth and was basically determined by sound power d an often-overlooked factor.To address the anisotropic propagation of airblasts,a predictive model was proposed for external noise levels,considering variables like distance,azimuth angle,initial sound power,and wave expansion.Validated by tests,this model successfully unifies data from three studies,helping to explain and predict airblast disturbances near tunnels.
基金supported by the National Natural Science Foundation of China(Grant No.42261134532,42405059,and U2342212)。
文摘This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlying physical mechanism. Specifically, for the simplified case of constant stratospheric N^(2), the refractive index square of planetary waves has a theoretical tendency to increase first and then decrease with an increased N^(2), whereas the group velocity weakens. Mechanistically, this behavior can be understood as an intensified suppression of vertical isentropic surface displacement caused by meridional heat transport of planetary waves under strong N^(2) conditions. Observational analysis corroborates this finding, demonstrating a reduction in the vertical-propagation velocity of waves with increased N^(2). A linear, quasi- geostrophic, mid-latitude beta-plane model with a constant background westerly wind and a prescribed N^(2) applicable to the stratosphere is used to obtain analytic solutions. In this model, the planetary waves are initiated by steady energy influx from the lower boundary. The analysis indicates that under strong N^(2) conditions, the amplitude of planetary waves can be sufficiently increased by the effective energy convergence due to the slowing vertical energy transfer, resulting in a streamfunction response in this model that contains more energy. For N^(2) with a quasi-linear vertical variation, the results bear a resemblance to the constant case, except that the wave amplitude and oscillating frequency show some vertical variations.
基金supported by the Research Council of Lithuania(LMTLT),agreement no.S-MIP-22-5.
文摘Adhesively bonded joints are widely used in modern lightweight structures due to their high strengthto-weight ratio and design flexibility.However,the reliable non-destructive evaluation of bond integrity remains a significant challenge.This study presents a numerical investigation of adhesively bonded joints with different adhesive properties using ultrasonic guided waves.The main focus of the investigation is to evaluate the feasibility of using guided waves to assess bond integrity,particularly for detecting challenging weak bonds.For this purpose,a theoretical analysis of dispersion curves was conducted,revealing that the S0 Lamb wave mode is significantly sensitive to variations in adhesive properties in the 300-700 kHz frequency range.Finite element modelling was used to analyse the propagation of guided waves in two scenarios:an adhesively bonded aluminum structure and a more complex configuration-adhesively bonded lap joints.The Short-Time Fourier Transform(STFT)was used to process the obtained results and determine the group velocities of guided waves.By analysing the group velocity characteristics,their dependence on the adhesive properties was identified.In the first scenario,a clear separation of S0 modes from A0 modes was observed in the STFT analysis,with a decrease in group velocity as adhesive stiffness increased.For the more complex lap joint scenario,the separation between A0 and S0 modes was less distinct.However,the analysis of the average group velocity shows a dependence of average group velocity on adhesive properties.This is similar to the first scenario.There is a decrease in average group velocity as adhesive stiffness increases.The results obtained demonstrate that guided wavebased methods have a high potential for non-destructive evaluation of adhesively bonded structures,including the detection of weak bonds.
基金supported by the National Natural Science Foundation of China(Nos.52071057,52171247)the Liaoning Youth Elite Talent Program(No.XLYC220309)。
文摘Waves are important physical phenomena in an ocean,and their accurate prediction is essential for ocean engineering,maritime traffic,and marine early warning systems.This study focuses on the Qinhuangdao Sea area located in the Bohai Sea,China.Herein,we use on-site wind data to correct the reanalysis wind data obtained from the European Centre for Medium-Range Weather Forecasts(ECMWF),improving the accuracy of boundary conditions.Then,we use the Simulating WAves Nearshore(SWAN)model to simulate the regional wave field over time.A regional wave-parameter prediction model is then developed using a limited number of sampled data(covering only 2 years,2020–2021);the model is based on the Whale Optimization Algorithm(WOA),convolutional neural networks(CNNs),and long short-term memory(LSTM)neural networks.WOA is used to optimize the CNN and LSTM framework;in this framework,CNN extracts spatial features,and the LSTM network captures temporal features,enabling accurate short and long-term predictions of wave height,period,and direction.The experimental results showed that despite the small sample size,the model achieves a goodness of fit of 0.9957 for wave height prediction,0.9973 for period,and 0.9749 for wave direction in short-term forecasting.As the prediction step size increases,the accuracy of the model decreases.When the prediction step size reaches 9 h,the root mean square error for the prediction of wave height,period,and direction increases to 0.2060 m,0.4582 s,and32.5358°,respectively.The reliability and applicability of the model are further validated by the experimental results.Our findings highlighted the potential of the developed model in operational wave forecasting,even with a limited number of sampled data.
基金supported by the National Natural Science Foundation of China(Grant No.52172117,52202105)the Natural Science Basic Research Program of Shaanxi Province(Grant No.2025JC-QYCX-040)。
文摘To address increasing electromagnetic interference and pollution problems,this study proposes a component regulation strategy.Hollow magnetic microspheres derived from metal-organic frameworks(MOFs)were incorporated into carbon fibers(Co@CNFs)through electrospinning technology,forming a sugar-gourd-like heterostructure.This structure promotes the synergy between dielectric and magnetic losses.The full utilization of multi-component synergy and the well-designed heterogeneous interfaces enhances interfacial polarization and optimizes the balance between impedance and high loss.The hollow structure of magnetic microspheres facilitates multiple scattering of electromagnetic waves(EMW).Additionally,the change of heat treatment temperature offers a viable method to adjust the dielectric properties of composites.The results indicate that the Co@CNFs exhibit outstanding EMW attenuation capability,even at an ultralow filler loading of 3 wt%,achieving a reflection loss of-39.7 dB and an effective absorption bandwidth of 7.6 GHz.This study demonstrates the effectiveness of component regulation and offers a viable approach for lightweight,high-performance EMW absorption materials.
基金support from the National Natural Science Foundation of China (Nos.52377026 and52301192)Taishan Scholars and Young Experts Program of Shandong Province,China (No.tsqn202103057)+2 种基金Natural Science Foundation of Shandong Province,China (Nos.ZR2024ME046 and ZR2024QE313)Natural Science Basic Research Program of Shaanxi,China (No.2025JC-YBMS-396)Postdoctoral Science Foundation of China (No.2024M761554)
文摘The rapid development of electronic devices and communication technologies has resulted in increasingly severe electromagnetic-wave(EW)pollution.Efficient EW absorption(EWA)materials are essential to mitigate their impact and ensure human safety in modern society.Fe-based EWA materials have garnered significant attention owing to their cost-effectiveness,high saturation magnetization,and superior magnetic loss capabilities.This review begins with an introduction to Fe-based EWA materials,followed by a brief description of their EWA mechanisms.Various pristine Fe-based absorbers,such as carbonyl iron powder,ferrite-based materials,Fe-based alloys,Fe-based high-entropy alloys(HEAs),and Fe-based layered ternary transition-metal borides,have been systematically reviewed.Key strategies to enhance the performance of Fe-based composite absorbers,including doping,in-situ oxidation,porous structuring,and composite construction,are critically discussed.Finally,the review presents a summary and future perspectives in this field,highlighting the synergy between Fe-based and high-entropy materials in advancing next-generation EWA for applications in stealth technology,wear-able electronics,and harsh environments.
