A flow field around a streamlined body at an intermediate angle of incidence is dominated by cross-flow separation and vortical flow fields. The separated flow leads to a pair of vortices on the leeside of the body; t...A flow field around a streamlined body at an intermediate angle of incidence is dominated by cross-flow separation and vortical flow fields. The separated flow leads to a pair of vortices on the leeside of the body; therefore, it is essential to accurately determine this pair and estimate its size and location. This study utilizes the element-based finite volume method based on RANS equations to compute a 3D axisymmetric flow around a SUBOFF bare submarined hull. Cross-flow vortex structures are then numerically simulated and compared for a submarine with SUBOFF and DRDC STR bows. Computed results of pressure and shear stress distribution on the hull surface and the strength and locations of the vortex structures are presented at an intermediate incidence angle of 20°. A wind tunnel experiment is also conducted to experimentally visualize the vortex structures and measure their core locations. These experimental results are compared with the numerical data, and a good agreement is found.展开更多
When the light wave propagates through the hypersonic flow field, the aero-optic distortion happens. It is necessary to recognize the vortex structure for studying the light propagation model. A new vortex structure r...When the light wave propagates through the hypersonic flow field, the aero-optic distortion happens. It is necessary to recognize the vortex structure for studying the light propagation model. A new vortex structure recognition method is proposed in this paper. Firstly, the refractive index field, which is transformed from the turbulent density field, is changed to gray scale images with a- bundant texture information equivalently. Then, wavelet transform is performed to decompose these images and the entropy values of the wavelet base coefficients are calculated. Comparing the entropy value to a given threshold, the modules with lower entropy are considered to be the large-scale vortex modules while those with higher entropy are small-scale vortex modules. The computer simulation results show that the proposed method is valid to recognize the vortex structures. This paper provides basis for investigation on the optics propagation model in terms of the turbulence vortex structures.展开更多
A new type of vortex structure-binucleus-type vortex structure-is presented in this paper. It is charac-terized by two nuclear columns which distinguish it from uninuclcus-type vorlex structure. The vortical sur-faces...A new type of vortex structure-binucleus-type vortex structure-is presented in this paper. It is charac-terized by two nuclear columns which distinguish it from uninuclcus-type vorlex structure. The vortical sur-faces of the structure are commonly s-shaped and reversed s-shaped and subordinately of clliptic andhyperbolic shape. and sometimes turbine-like surfaces are observed. On the basis of field structural studies. a mechanical model of rotation around a binuclear column ofcrustal materials is presented in the paper. Burgers viscoelastic solutions of the stress field and deformationfield of this structural type have been obtained using the principle and method of rheology. and simulation ex-periments have been performed. The results of the theoretical calculation and experiments indicate that theproposed mechanical model is applicable.展开更多
Nature has shown us that the microstructure of the skin of fast-swimming sharks in the ocean can reduce the skin friction drag due to the well-known shark-skin effect.In the present study,the effect of shark-skin-insp...Nature has shown us that the microstructure of the skin of fast-swimming sharks in the ocean can reduce the skin friction drag due to the well-known shark-skin effect.In the present study,the effect of shark-skin-inspired riblets on coherent vortex structures in a turbulent boundary layer（TBL） is investigated.This is done by means of tomographic particle image velocimetry（TPIV） measurements in channel fl ws over an acrylic plate of drag-reducing riblets at a friction Reynolds number of 190.The turbulent fl ws over drag-reducing riblets are verifie by a planar time-resolved particle image velocimetry（TRPIV） system initially,and then the TPIV measurements are performed.Two-dimensional（2D） experimental results with a dragreduction rate of around 4.81% are clearly visible over triangle riblets with a peak-to-peak spacing s＋of 14,indicating from the drag-reducing performance that the buffer layer within the TBL has thickened;the logarithmic law region has shifted upward and the Reynolds shear stress decreased.A comparison of the spatial topological distributions of the spanwise vorticity of coherent vortex structures extracted at different wall-normal heights through the improved quadrant splitting method shows that riblets weaken the amplitudesof the spanwise vorticity when ejection（Q2） and sweep（Q4） events occur at the near wall,having the greatest effect on Q4 events in particular.The so-called quadrupole statistical model for coherent structures in the whole TBL is verified Meanwhile,their spatial conditional-averaged topological shapes and the spatial scales of quadrupole coherent vortex structures as a whole in the overlying turbulent fl w over riblets are changed,suggesting that the riblets dampen the momentum and energy exchange between the regions of near-wall and outer portion of the TBL by depressing the bursting events（Q2 and Q4）,thereby reducing the skin friction drag.展开更多
By means of ink trace visualization of the flows in conventional straight, positively curved and negatively curved cascades with tip clearance, and measurement of the aerodynamic parameters in transverse section, and...By means of ink trace visualization of the flows in conventional straight, positively curved and negatively curved cascades with tip clearance, and measurement of the aerodynamic parameters in transverse section, and by appling topology theory, the topological structures and vortex structure in the transverse section of a blade cascade were analyzed. Compared with conventional straight cascade, blade positive curving eliminates the separation line of the upper passage vortex, and leads the secondary vortex to change from close separation to open separation, while blade negative curving effects merely the positions of singular points and the intensities and scales of vortex.展开更多
Measurements of turbulent flow fields in a stilling basin of multi-horizontal submerged jets were made with the single- camera Particle Image Velocimetry （PIV）. The particle images were captured, processed, and subs...Measurements of turbulent flow fields in a stilling basin of multi-horizontal submerged jets were made with the single- camera Particle Image Velocimetry （PIV）. The particle images were captured, processed, and subsequently used to characterize the flow in terms of the 2-D velocity and vorticity distributions. This study shows that the maximum close-to-bed velocity in the stilling basin is approximately reduced by 60%, comparing to the jet velocity at the outlet of orifices. The jet velocity is distributed evenly at the latter half of the stilling basin and the time-averaged velocity of the cross section is reduced by 77%-85%, comparing to the jet velocity at the outlet of orifices. These results show that the vortices with horizontal axes are continuously repeated during the form-merge-split-disappear process. The vertical vortices are continuously formed and disappeared, they appear randomly near the slab and intermittently reach the slab of the stilling basin. The range of these vortices is small. Vortices with horizontal axes and ver- tical vortices do not coincide in space and the vortices with horizontal axes only affect the position of the tail of the vertical vortices attached to the slab of the stilling basin.展开更多
This paper investigates the ventilated cavity phenomena of a symmetric body under specific conditions,focusing on the factors affecting the vortex structure.The ventilated cavitating flow development process is simula...This paper investigates the ventilated cavity phenomena of a symmetric body under specific conditions,focusing on the factors affecting the vortex structure.The ventilated cavitating flow development process is simulated with a homogeneous free surface model combined with a filter-based turbulence model.The results show the characteristics of the pressure pulse and the bubble shedding around the axisymmetric body.A quasiperiodic pressure pulse occurs at the middle of the body.In addition,three main types of vortices occur in ventilated partial cavitation:large-scale cloud vortices,U-type vortices,and small-scale vortices.Further analysis revealed that the cavities and vortex structures have similar influencing factors.The vorticity transport equation is applied to analyze the main factors influencing the vortex.The results indicate that fluid density primarily affects largescale cloud vortices,the velocity gradient plays a dominant role in U-type vortices,and fluid angular velocity is the main influencing factor for small-scale vortices.展开更多
Considered as the building blocks,vortex structures with variety of sizes and intensity are widely recognized in the viscous flow field around ship.In this paper,the computational fluid dynamics(CFD)solver,naoe-FOAM-S...Considered as the building blocks,vortex structures with variety of sizes and intensity are widely recognized in the viscous flow field around ship.In this paper,the computational fluid dynamics(CFD)solver,naoe-FOAM-SJTU,coupled with delayed detached-eddy simulation(DDES)is adopted to analyze the vortex structures around the benchmark model Yupeng Ship in dynamic pure yaw tests,which are captured by third generation of vortex identification method.The good agreement of the predicted force/moment by DDES method with the experimental data indicates that the present numerical schemes are reliable and robust.Three vortex identification methods,Q-criteria,Ω_(R) and Liutex,are used to capture the vortex structures around the hull.The large separated flow is able to be investigated by these three methods,in which more vortex structures are captured byΩ_(R) approach and Liutex method with scalar,vector and tensor form seems to be more suitable for analyzing the flow mechanism around the hull in dynamic pure yaw test.In general,each vortex structure corresponds to a dominant positive/negative axial Liutex and a bound vortex pair.The streamlines are spiral in the large separated flow,indicating that the flow in corresponding region is rotational.But the rotation of the flow is not directly related to the intensity of Liutex.展开更多
Shape-induced phase transition of vortex domain structures （VDSs） in BaTiO3 （BT） nanodots under open circuit boundary condition have been investigated using an effective Hamiltonian method. Our calculation indicat...Shape-induced phase transition of vortex domain structures （VDSs） in BaTiO3 （BT） nanodots under open circuit boundary condition have been investigated using an effective Hamiltonian method. Our calculation indicates the tetragonal VDS missing in cubic BT nanodots can be induced by varying the shape of a nanodot from cube to platelet. Interestingly, a novel VDS is found in BT nanoplatelets in our simulations. Further investigation shows that it is a result of compromise between the ground state and the symmetry of the shape of the nanodot. Furthermore, based on the novel VDS, routes of controlling VDSs governed by homogeneous electric field and uniform stress are discussed. In particular, our results show the possibility of designing multi-states devices based on a single VDS. ~ 2017 The Authors. Published by Elsevier Ltd on behalf of The Chinese Society of Theoretical and Applied Mechanics.展开更多
The Gymnarchus niloticus fish can swim in surging and heaving directions only with a long undulating ribbon fin while keeping its body along almost straight line.These features substantially inspire the design of unde...The Gymnarchus niloticus fish can swim in surging and heaving directions only with a long undulating ribbon fin while keeping its body along almost straight line.These features substantially inspire the design of underwater vessels with high maneuverability and station keeping performance,which is characterized by peculiar vortex structures induced by undulating fin propulsion.To reveal the propulsion mechanism under the evolution of these complex vortex structures,the variation of velocity field with the undulating fin’s wave phase on cross section and mid-sagittal plane at wave amplitude of 85°is investigated by phase-locked digital particle image velocimetry(DPIV).Through experimental flow field images,two typical vortex structures are clearly identified,i.e.,streamwise vortex and crescent vortex,which is further explained by supplemental numerical simulations using large eddy simulation.Vortex characteristic and its evolution on cross sections and mid-sagittal planes is investigated,and its relationship with thrust,heave force is also analyzed.It is found that the two kinds of vortexes induce the main hydrodynamic forces in two directions synchronously,which brings the undulating fin propulsion an extra-ordinal maneuverability.The research will be useful for understanding the potential mechanism of this novel propulsion and is of great application prospect in designing more maneuverable underwater vehicles.展开更多
In order to understand the interaction between large-scale vortex structure and particles, a two-way coupling temporal mixing layer laden with particles at a Stokes number of 5 with different mass loading planted init...In order to understand the interaction between large-scale vortex structure and particles, a two-way coupling temporal mixing layer laden with particles at a Stokes number of 5 with different mass loading planted initially in the upper half region is numerically studied. The pseudospectral method is used for the flow fluid and the Lagrangian approach is employed to trace particles. The momentum coupling effect introduced by a particle is approximated to a point force. The simulation results show that the coherent structures are still dominant in the mixing layer, but the large-scale vortex structure and particle dispersion are modulated. The length of large-scale vortex structure is shortened and the pairing is delayed. At the same time, the particles are distributed more evenly in the whole flow field as the mass loading is increased, but the particle dispersion along the transverse direction differs from that along the spanwise direction, which indicates that the effect by the addition of particle on the spanwise large-scale vortex structure is different from the streamwise counterpart.展开更多
Large eddy simulation(LES)was coupled with a homogeneous cavitation model to study turbulent cavitating flows around a sphere.The simulations are in good agreement with available experimental data and the simulated ac...Large eddy simulation(LES)was coupled with a homogeneous cavitation model to study turbulent cavitating flows around a sphere.The simulations are in good agreement with available experimental data and the simulated accuracy has been evaluated using the LES verification and validation method.Various cavitation numbers are simulated to study important flow characteristics in the sphere wake,e.g.periodic cavity growth/contraction,interactions between the cloud and sheet cavitations and the vortex structure evolution.The spectral characteristics of the wake for typical cloud cavitation conditions were classified as the periodic cavitation mode,high Strouhal number mode and low Strouhal number mode.Main frequency distributions in the wake were analyzed and different dominant flow structures were identified for each of the three modes.Further,the cavitation and vortex relationship was also studied,which is an important issue associated with complex cavitating sphere wakes.Three types of cavitating vortex structures alternate,which indicates that three different cavity shedding regimes may exist in the wake.Analysis of vorticity transport equation shows a significant vorticity increase at the cavitation closure region and in the vortex cavitation region.This study provides a physical perspective to further understand the flow mechanisms in cavitating sphere wakes.展开更多
Abstract Experiments were conducted in a water tunnel by tomographic time-resolved particle image velocimetry （Tomo-TRPIV）. The Reynolds number Reo is 2 460 on the base of momentum thickness. According to the physic...Abstract Experiments were conducted in a water tunnel by tomographic time-resolved particle image velocimetry （Tomo-TRPIV）. The Reynolds number Reo is 2 460 on the base of momentum thickness. According to the physical mechanism of the stretch and compression of multi-scale vortex structures in the wall-bounded turbulence, the topological characteristics of turbulence statistics in logarithmic layer were illustrated by local-averaged velocity structure function. During coherent structures bursting, results reveal that the topological structures of velocity gradients, velocity strain rates and vorticities behave as antisymmetric quadrupole modes. A three-layer antisymmetric quadrupole vortex packet confirms that there is a tight relationship between the outer layer and the near-wall layer.展开更多
The recent progress on non-local Lagrangian and quasi-Lagrangian structures in turbulence is reviewed.The quasi-Lagrangian structures, e.g., vortex surfaces in viscous flow, gas-liquid interfaces in multi-phase flow, ...The recent progress on non-local Lagrangian and quasi-Lagrangian structures in turbulence is reviewed.The quasi-Lagrangian structures, e.g., vortex surfaces in viscous flow, gas-liquid interfaces in multi-phase flow, and flame fronts in premixed combustion, can show essential Lagrangian following properties, but they are able to have topological changes in the temporal evolution. In addition,they can represent or influence the turbulent flow field. The challenges for the investigation of the non-local structures include their identification, characterization, and evolution.The improving understanding of the quasi-Lagrangian structures is expected to be helpful to elucidate crucial dynamics and develop structure-based predictive models in turbulence.展开更多
Displacement fluctuation is the difference between the real displacement and the affine displacement in deforming granular materials. The discrete element method （DEM） is widely used along with experimental approach...Displacement fluctuation is the difference between the real displacement and the affine displacement in deforming granular materials. The discrete element method （DEM） is widely used along with experimental approaches to investigate whether the displacement fluctuation represents the vortex structure. Current research suggests that the vortex structure is caused by the cooperative motion of particle groups on meso-scales, which results in strain localization in granular materials. In this brief article, we investigate the vortex structure using the finite element method （FEM） based on the Cosserat cor[tinuum model. The numerical example focuses on the relationship between the vortex structure and the shear bands under two conditions： （a） uniform granular materials; （b） granular materials with inclusions. When compared with distributions of the effective strain and the vortex structure, we find that the vortex structure coexists with the strain localization and originates from the stiffness cooperation of different locations in granular materials at the macro level.展开更多
We give a brief review of the asymptotic theory of slender vortex filaments with emphases on (i) the choices of scalings and small parameters characterizing the physical problem,(ii) the key steps in the formulation o...We give a brief review of the asymptotic theory of slender vortex filaments with emphases on (i) the choices of scalings and small parameters characterizing the physical problem,(ii) the key steps in the formulation of the theory and (iii) the assumptions and/or restrictions on the theory of Callegari and Ting (1978).We present highlights of an extension of the 1978 asymptotic theory:the analyses for core structures with axial variation.Making use of the physical insights gained from the analyses,we present a new derivation of the evolution equations for the core structure.The new one is simpler and straightforward and shows the physics clearly.展开更多
In order to understand the mechanism by which a pantograph can generate aerodynamic noise and grasp its farfield characteristics,a simplified double-strip pantograph is analyzed numerically.Firstly,the unsteady flow f...In order to understand the mechanism by which a pantograph can generate aerodynamic noise and grasp its farfield characteristics,a simplified double-strip pantograph is analyzed numerically.Firstly,the unsteady flow field around the pantograph is simulated in the frame of a large eddy simulation(LES)technique.Then the location of the main noise source is determined using surface fluctuating pressure data and the vortex structures in the pantograph flow field are analyzed by means of the Q-criterion.Based on this,the relationship between the wake vortex and the intensity of the aerodynamic sound source on the pantograph surface is discussed.Finally,the far-field aerodynamic noise is calculated by means of the Ffowcs Williams-Hawkings(FW-H)equation,and the contribution of each component to total noise and the frequency spectrum characteristics are analyzed.The results show that on the pantograph surface where vortex shedding or interaction with the wake of upstream components occurs,the pressure fluctuation is more intense,resulting in strong dipole sources.The far-field aerodynamic noise energy of the pantograph is mainly concentrated in the frequency band below 1500 Hz.The peaks in the frequency spectrum are mainly generated by the base frame,balance arm and the rear strip,which are also the main contributors to the aerodynamic noise.展开更多
To promote high-speed boundary layer transition,this paper proposes an active self-sustaining dual jets(SDJ)actuator utilizing the energy of supersonic mainflow.Employing the nanoparticle-based planar laser scattering...To promote high-speed boundary layer transition,this paper proposes an active self-sustaining dual jets(SDJ)actuator utilizing the energy of supersonic mainflow.Employing the nanoparticle-based planar laser scattering(NPLS),supersonic flat-plate boundary layer transition induced by SDJ is experimentally investigated in an Ma-2.95 low-turbulence wind tunnel.Streamwise and spanwise NPLS images are obtained to analyze fine flow structures of the whole transition process.The results reveal the transition control mechanisms that on the one hand,the jet-induced shear layer produces unstable Kelvin–Helmholtz instabilities in the wake flow,on the other hand,the jets also generates an adverse pressure gradient in the boundary layer and induce unstable streak structures,which gradually break down into turbulence downstream.The paper provides a new method for transition control of high-speed boundary layer,and have prospect both in theory and engineering application.展开更多
A computational model is established to investigate the effects of a periodic gust flow on the wake structure of ventilated supercavities.The effectiveness of the computational model is validated by comparing with ava...A computational model is established to investigate the effects of a periodic gust flow on the wake structure of ventilated supercavities.The effectiveness of the computational model is validated by comparing with available experimental data.Benefited from this numerical model,the vertical velocity characteristics in the entire flow field can be easily monitored and analyzed under the action of a gust generator;further,the unsteady evolution of the flow parameters of the closed region of the supercavity can be captured in any location.To avoid the adverse effects of mounting struts in the experiments and to obtain more realistic results,the wake structure of a ventilated supercavity without mounting struts is investigated.Unsteady changes in the wake morphology and vorticity distribution pattern of the ventilated supercavity are determined.The results demonstrate that the periodic swing of the gust generator can generate a gust flow and,therefore,generate a periodic variation of the ventilated cavitation numberσ.At the peakσ,a re-entrant jet closure appears in the wake of the ventilated supercavity.At the valleyσ,a twin-vortex closure appears in the wake of the ventilated supercavity.For the forward facing model,the twin vortex appears as a pair of centrally rolled-up vortices,due to the closure of vortex is affected by the structure.For the backward facing model,however,the twin vortex appears alternately as a pair of centrally rolled-up vortices and a pair of centrally rolled-down vortices,against the periodic gust flow.展开更多
Transporting and storing hydrogen is a complex technological task.A typical problem relates to the need to minimize the strength of fluid motion and heat transfer near the walls of the container.In this work this prob...Transporting and storing hydrogen is a complex technological task.A typical problem relates to the need to minimize the strength of fluid motion and heat transfer near the walls of the container.In this work this problem is tackled numerically assuming an infinite cavity of pipe square cross-section,located in a constant external temperature gradient.In particular,a method based on the application of vibrations to suppress the gravitational convection mechanism is explored.A parametric investigation is conducted and the limits of applicability of the method for small Grashof numbers(10e4)are determined.It is shown that it is possible to minimize the intensity of the vibrogravitational flow for any values of the problem parameters if correction factors are specified.The results obtained can be applied in technological processes associated with the transportation,storage and use of hydrogen:pumping the working fluid through pipes,storage in tanks,as well as flow processes in the combustion chambers of power plants.展开更多
文摘A flow field around a streamlined body at an intermediate angle of incidence is dominated by cross-flow separation and vortical flow fields. The separated flow leads to a pair of vortices on the leeside of the body; therefore, it is essential to accurately determine this pair and estimate its size and location. This study utilizes the element-based finite volume method based on RANS equations to compute a 3D axisymmetric flow around a SUBOFF bare submarined hull. Cross-flow vortex structures are then numerically simulated and compared for a submarine with SUBOFF and DRDC STR bows. Computed results of pressure and shear stress distribution on the hull surface and the strength and locations of the vortex structures are presented at an intermediate incidence angle of 20°. A wind tunnel experiment is also conducted to experimentally visualize the vortex structures and measure their core locations. These experimental results are compared with the numerical data, and a good agreement is found.
基金Supported by the National Natural Science Foundation of China(91016004)
文摘When the light wave propagates through the hypersonic flow field, the aero-optic distortion happens. It is necessary to recognize the vortex structure for studying the light propagation model. A new vortex structure recognition method is proposed in this paper. Firstly, the refractive index field, which is transformed from the turbulent density field, is changed to gray scale images with a- bundant texture information equivalently. Then, wavelet transform is performed to decompose these images and the entropy values of the wavelet base coefficients are calculated. Comparing the entropy value to a given threshold, the modules with lower entropy are considered to be the large-scale vortex modules while those with higher entropy are small-scale vortex modules. The computer simulation results show that the proposed method is valid to recognize the vortex structures. This paper provides basis for investigation on the optics propagation model in terms of the turbulence vortex structures.
文摘A new type of vortex structure-binucleus-type vortex structure-is presented in this paper. It is charac-terized by two nuclear columns which distinguish it from uninuclcus-type vorlex structure. The vortical sur-faces of the structure are commonly s-shaped and reversed s-shaped and subordinately of clliptic andhyperbolic shape. and sometimes turbine-like surfaces are observed. On the basis of field structural studies. a mechanical model of rotation around a binuclear column ofcrustal materials is presented in the paper. Burgers viscoelastic solutions of the stress field and deformationfield of this structural type have been obtained using the principle and method of rheology. and simulation ex-periments have been performed. The results of the theoretical calculation and experiments indicate that theproposed mechanical model is applicable.
基金supported by the National Natural Science Foundation of China (Grants 11332006,11272233,and 11411130150)the foundation from the China Scholarship Council (CSC) (Grant 201306250092)the Foundation Project for Outstanding Doctoral Dissertations of Tianjin University
文摘Nature has shown us that the microstructure of the skin of fast-swimming sharks in the ocean can reduce the skin friction drag due to the well-known shark-skin effect.In the present study,the effect of shark-skin-inspired riblets on coherent vortex structures in a turbulent boundary layer（TBL） is investigated.This is done by means of tomographic particle image velocimetry（TPIV） measurements in channel fl ws over an acrylic plate of drag-reducing riblets at a friction Reynolds number of 190.The turbulent fl ws over drag-reducing riblets are verifie by a planar time-resolved particle image velocimetry（TRPIV） system initially,and then the TPIV measurements are performed.Two-dimensional（2D） experimental results with a dragreduction rate of around 4.81% are clearly visible over triangle riblets with a peak-to-peak spacing s＋of 14,indicating from the drag-reducing performance that the buffer layer within the TBL has thickened;the logarithmic law region has shifted upward and the Reynolds shear stress decreased.A comparison of the spatial topological distributions of the spanwise vorticity of coherent vortex structures extracted at different wall-normal heights through the improved quadrant splitting method shows that riblets weaken the amplitudesof the spanwise vorticity when ejection（Q2） and sweep（Q4） events occur at the near wall,having the greatest effect on Q4 events in particular.The so-called quadrupole statistical model for coherent structures in the whole TBL is verified Meanwhile,their spatial conditional-averaged topological shapes and the spatial scales of quadrupole coherent vortex structures as a whole in the overlying turbulent fl w over riblets are changed,suggesting that the riblets dampen the momentum and energy exchange between the regions of near-wall and outer portion of the TBL by depressing the bursting events（Q2 and Q4）,thereby reducing the skin friction drag.
文摘By means of ink trace visualization of the flows in conventional straight, positively curved and negatively curved cascades with tip clearance, and measurement of the aerodynamic parameters in transverse section, and by appling topology theory, the topological structures and vortex structure in the transverse section of a blade cascade were analyzed. Compared with conventional straight cascade, blade positive curving eliminates the separation line of the upper passage vortex, and leads the secondary vortex to change from close separation to open separation, while blade negative curving effects merely the positions of singular points and the intensities and scales of vortex.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 51279118, 50479062)the Key Projects in the National Science and Technology Pillar Program (Grant No. 2008BAB29B04)
文摘Measurements of turbulent flow fields in a stilling basin of multi-horizontal submerged jets were made with the single- camera Particle Image Velocimetry （PIV）. The particle images were captured, processed, and subsequently used to characterize the flow in terms of the 2-D velocity and vorticity distributions. This study shows that the maximum close-to-bed velocity in the stilling basin is approximately reduced by 60%, comparing to the jet velocity at the outlet of orifices. The jet velocity is distributed evenly at the latter half of the stilling basin and the time-averaged velocity of the cross section is reduced by 77%-85%, comparing to the jet velocity at the outlet of orifices. These results show that the vortices with horizontal axes are continuously repeated during the form-merge-split-disappear process. The vertical vortices are continuously formed and disappeared, they appear randomly near the slab and intermittently reach the slab of the stilling basin. The range of these vortices is small. Vortices with horizontal axes and ver- tical vortices do not coincide in space and the vortices with horizontal axes only affect the position of the tail of the vertical vortices attached to the slab of the stilling basin.
基金supported by the Aviation Science Foundation(Grant No.20230023072001).
文摘This paper investigates the ventilated cavity phenomena of a symmetric body under specific conditions,focusing on the factors affecting the vortex structure.The ventilated cavitating flow development process is simulated with a homogeneous free surface model combined with a filter-based turbulence model.The results show the characteristics of the pressure pulse and the bubble shedding around the axisymmetric body.A quasiperiodic pressure pulse occurs at the middle of the body.In addition,three main types of vortices occur in ventilated partial cavitation:large-scale cloud vortices,U-type vortices,and small-scale vortices.Further analysis revealed that the cavities and vortex structures have similar influencing factors.The vorticity transport equation is applied to analyze the main factors influencing the vortex.The results indicate that fluid density primarily affects largescale cloud vortices,the velocity gradient plays a dominant role in U-type vortices,and fluid angular velocity is the main influencing factor for small-scale vortices.
基金supported by the National Natural Science Foundation of China(Grant Nos.51909160,51879159,52131102)the National Key Research and Development Program of China(Grant No.2019YFB1704200).
文摘Considered as the building blocks,vortex structures with variety of sizes and intensity are widely recognized in the viscous flow field around ship.In this paper,the computational fluid dynamics(CFD)solver,naoe-FOAM-SJTU,coupled with delayed detached-eddy simulation(DDES)is adopted to analyze the vortex structures around the benchmark model Yupeng Ship in dynamic pure yaw tests,which are captured by third generation of vortex identification method.The good agreement of the predicted force/moment by DDES method with the experimental data indicates that the present numerical schemes are reliable and robust.Three vortex identification methods,Q-criteria,Ω_(R) and Liutex,are used to capture the vortex structures around the hull.The large separated flow is able to be investigated by these three methods,in which more vortex structures are captured byΩ_(R) approach and Liutex method with scalar,vector and tensor form seems to be more suitable for analyzing the flow mechanism around the hull in dynamic pure yaw test.In general,each vortex structure corresponds to a dominant positive/negative axial Liutex and a bound vortex pair.The streamlines are spiral in the large separated flow,indicating that the flow in corresponding region is rotational.But the rotation of the flow is not directly related to the intensity of Liutex.
文摘Shape-induced phase transition of vortex domain structures （VDSs） in BaTiO3 （BT） nanodots under open circuit boundary condition have been investigated using an effective Hamiltonian method. Our calculation indicates the tetragonal VDS missing in cubic BT nanodots can be induced by varying the shape of a nanodot from cube to platelet. Interestingly, a novel VDS is found in BT nanoplatelets in our simulations. Further investigation shows that it is a result of compromise between the ground state and the symmetry of the shape of the nanodot. Furthermore, based on the novel VDS, routes of controlling VDSs governed by homogeneous electric field and uniform stress are discussed. In particular, our results show the possibility of designing multi-states devices based on a single VDS. ~ 2017 The Authors. Published by Elsevier Ltd on behalf of The Chinese Society of Theoretical and Applied Mechanics.
基金Projects supported by the National Natural Science Foundation of China(Grant Nos.51379193,51779233).
文摘The Gymnarchus niloticus fish can swim in surging and heaving directions only with a long undulating ribbon fin while keeping its body along almost straight line.These features substantially inspire the design of underwater vessels with high maneuverability and station keeping performance,which is characterized by peculiar vortex structures induced by undulating fin propulsion.To reveal the propulsion mechanism under the evolution of these complex vortex structures,the variation of velocity field with the undulating fin’s wave phase on cross section and mid-sagittal plane at wave amplitude of 85°is investigated by phase-locked digital particle image velocimetry(DPIV).Through experimental flow field images,two typical vortex structures are clearly identified,i.e.,streamwise vortex and crescent vortex,which is further explained by supplemental numerical simulations using large eddy simulation.Vortex characteristic and its evolution on cross sections and mid-sagittal planes is investigated,and its relationship with thrust,heave force is also analyzed.It is found that the two kinds of vortexes induce the main hydrodynamic forces in two directions synchronously,which brings the undulating fin propulsion an extra-ordinal maneuverability.The research will be useful for understanding the potential mechanism of this novel propulsion and is of great application prospect in designing more maneuverable underwater vehicles.
基金Supported by the National Natural Science Foundation of China (No. 50236030, No. 50076038) and the Major State Basic Research Development Program of China (No. G19990222).
文摘In order to understand the interaction between large-scale vortex structure and particles, a two-way coupling temporal mixing layer laden with particles at a Stokes number of 5 with different mass loading planted initially in the upper half region is numerically studied. The pseudospectral method is used for the flow fluid and the Lagrangian approach is employed to trace particles. The momentum coupling effect introduced by a particle is approximated to a point force. The simulation results show that the coherent structures are still dominant in the mixing layer, but the large-scale vortex structure and particle dispersion are modulated. The length of large-scale vortex structure is shortened and the pairing is delayed. At the same time, the particles are distributed more evenly in the whole flow field as the mass loading is increased, but the particle dispersion along the transverse direction differs from that along the spanwise direction, which indicates that the effect by the addition of particle on the spanwise large-scale vortex structure is different from the streamwise counterpart.
基金This work was financially supported by the National Natural Science Foundation of China(Grants 51822903 and 11772239)the Natural Science Foundation of Hubei Province(Grant 2018CFA010).The numerical calculations were done on the supercomputing system in the Supercomputing Center of Wuhan University.
文摘Large eddy simulation(LES)was coupled with a homogeneous cavitation model to study turbulent cavitating flows around a sphere.The simulations are in good agreement with available experimental data and the simulated accuracy has been evaluated using the LES verification and validation method.Various cavitation numbers are simulated to study important flow characteristics in the sphere wake,e.g.periodic cavity growth/contraction,interactions between the cloud and sheet cavitations and the vortex structure evolution.The spectral characteristics of the wake for typical cloud cavitation conditions were classified as the periodic cavitation mode,high Strouhal number mode and low Strouhal number mode.Main frequency distributions in the wake were analyzed and different dominant flow structures were identified for each of the three modes.Further,the cavitation and vortex relationship was also studied,which is an important issue associated with complex cavitating sphere wakes.Three types of cavitating vortex structures alternate,which indicates that three different cavity shedding regimes may exist in the wake.Analysis of vorticity transport equation shows a significant vorticity increase at the cavitation closure region and in the vortex cavitation region.This study provides a physical perspective to further understand the flow mechanisms in cavitating sphere wakes.
基金supported by the National Natural Science Fundation of China (11272233)National Basic Research Program (973 Program) (2012CB720101)2013 Opening Fund of LNM,Institute of Mechanics,Chinese Academy of Sciences
文摘Abstract Experiments were conducted in a water tunnel by tomographic time-resolved particle image velocimetry （Tomo-TRPIV）. The Reynolds number Reo is 2 460 on the base of momentum thickness. According to the physical mechanism of the stretch and compression of multi-scale vortex structures in the wall-bounded turbulence, the topological characteristics of turbulence statistics in logarithmic layer were illustrated by local-averaged velocity structure function. During coherent structures bursting, results reveal that the topological structures of velocity gradients, velocity strain rates and vorticities behave as antisymmetric quadrupole modes. A three-layer antisymmetric quadrupole vortex packet confirms that there is a tight relationship between the outer layer and the near-wall layer.
基金supported in part by the National Natural Science Foundation of China (Grants 11342011, 11472015, and 11522215)the Thousand Young Talents Program of China
文摘The recent progress on non-local Lagrangian and quasi-Lagrangian structures in turbulence is reviewed.The quasi-Lagrangian structures, e.g., vortex surfaces in viscous flow, gas-liquid interfaces in multi-phase flow, and flame fronts in premixed combustion, can show essential Lagrangian following properties, but they are able to have topological changes in the temporal evolution. In addition,they can represent or influence the turbulent flow field. The challenges for the investigation of the non-local structures include their identification, characterization, and evolution.The improving understanding of the quasi-Lagrangian structures is expected to be helpful to elucidate crucial dynamics and develop structure-based predictive models in turbulence.
基金supported by the National Natural Science Foundation of China(Nos.11172216 and 11472196)the Natural Key Basic Research and Development Program of China(973 Program)(Nos.2010CB731502 and 2010CB732005)
文摘Displacement fluctuation is the difference between the real displacement and the affine displacement in deforming granular materials. The discrete element method （DEM） is widely used along with experimental approaches to investigate whether the displacement fluctuation represents the vortex structure. Current research suggests that the vortex structure is caused by the cooperative motion of particle groups on meso-scales, which results in strain localization in granular materials. In this brief article, we investigate the vortex structure using the finite element method （FEM） based on the Cosserat cor[tinuum model. The numerical example focuses on the relationship between the vortex structure and the shear bands under two conditions： （a） uniform granular materials; （b） granular materials with inclusions. When compared with distributions of the effective strain and the vortex structure, we find that the vortex structure coexists with the strain localization and originates from the stiffness cooperation of different locations in granular materials at the macro level.
文摘We give a brief review of the asymptotic theory of slender vortex filaments with emphases on (i) the choices of scalings and small parameters characterizing the physical problem,(ii) the key steps in the formulation of the theory and (iii) the assumptions and/or restrictions on the theory of Callegari and Ting (1978).We present highlights of an extension of the 1978 asymptotic theory:the analyses for core structures with axial variation.Making use of the physical insights gained from the analyses,we present a new derivation of the evolution equations for the core structure.The new one is simpler and straightforward and shows the physics clearly.
基金This work is funded by National key R&D Program China(2016YFE0205200)National Natural Foundation of China(U1834201).
文摘In order to understand the mechanism by which a pantograph can generate aerodynamic noise and grasp its farfield characteristics,a simplified double-strip pantograph is analyzed numerically.Firstly,the unsteady flow field around the pantograph is simulated in the frame of a large eddy simulation(LES)technique.Then the location of the main noise source is determined using surface fluctuating pressure data and the vortex structures in the pantograph flow field are analyzed by means of the Q-criterion.Based on this,the relationship between the wake vortex and the intensity of the aerodynamic sound source on the pantograph surface is discussed.Finally,the far-field aerodynamic noise is calculated by means of the Ffowcs Williams-Hawkings(FW-H)equation,and the contribution of each component to total noise and the frequency spectrum characteristics are analyzed.The results show that on the pantograph surface where vortex shedding or interaction with the wake of upstream components occurs,the pressure fluctuation is more intense,resulting in strong dipole sources.The far-field aerodynamic noise energy of the pantograph is mainly concentrated in the frequency band below 1500 Hz.The peaks in the frequency spectrum are mainly generated by the base frame,balance arm and the rear strip,which are also the main contributors to the aerodynamic noise.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11602299,11872374,and 51809271)
文摘To promote high-speed boundary layer transition,this paper proposes an active self-sustaining dual jets(SDJ)actuator utilizing the energy of supersonic mainflow.Employing the nanoparticle-based planar laser scattering(NPLS),supersonic flat-plate boundary layer transition induced by SDJ is experimentally investigated in an Ma-2.95 low-turbulence wind tunnel.Streamwise and spanwise NPLS images are obtained to analyze fine flow structures of the whole transition process.The results reveal the transition control mechanisms that on the one hand,the jet-induced shear layer produces unstable Kelvin–Helmholtz instabilities in the wake flow,on the other hand,the jets also generates an adverse pressure gradient in the boundary layer and induce unstable streak structures,which gradually break down into turbulence downstream.The paper provides a new method for transition control of high-speed boundary layer,and have prospect both in theory and engineering application.
基金This study was financially supported by the Taishan Scholars Project of Shandong Province(tsqn201909172)the University Young Innovational Team Program of Shandong Province(2019KJN003)the Natural Scientific Research Innovation Foundation in Harbin Institute of Technology,Weihai(2020)。
文摘A computational model is established to investigate the effects of a periodic gust flow on the wake structure of ventilated supercavities.The effectiveness of the computational model is validated by comparing with available experimental data.Benefited from this numerical model,the vertical velocity characteristics in the entire flow field can be easily monitored and analyzed under the action of a gust generator;further,the unsteady evolution of the flow parameters of the closed region of the supercavity can be captured in any location.To avoid the adverse effects of mounting struts in the experiments and to obtain more realistic results,the wake structure of a ventilated supercavity without mounting struts is investigated.Unsteady changes in the wake morphology and vorticity distribution pattern of the ventilated supercavity are determined.The results demonstrate that the periodic swing of the gust generator can generate a gust flow and,therefore,generate a periodic variation of the ventilated cavitation numberσ.At the peakσ,a re-entrant jet closure appears in the wake of the ventilated supercavity.At the valleyσ,a twin-vortex closure appears in the wake of the ventilated supercavity.For the forward facing model,the twin vortex appears as a pair of centrally rolled-up vortices,due to the closure of vortex is affected by the structure.For the backward facing model,however,the twin vortex appears alternately as a pair of centrally rolled-up vortices and a pair of centrally rolled-down vortices,against the periodic gust flow.
基金carried out with financial support from the Russian Ministry of Education and Science,project FSNM-2023-0004“Hydrogen energy.Materials and technology for storage,transportation and use of hydrogen and hydrogen-containing mixtures”.
文摘Transporting and storing hydrogen is a complex technological task.A typical problem relates to the need to minimize the strength of fluid motion and heat transfer near the walls of the container.In this work this problem is tackled numerically assuming an infinite cavity of pipe square cross-section,located in a constant external temperature gradient.In particular,a method based on the application of vibrations to suppress the gravitational convection mechanism is explored.A parametric investigation is conducted and the limits of applicability of the method for small Grashof numbers(10e4)are determined.It is shown that it is possible to minimize the intensity of the vibrogravitational flow for any values of the problem parameters if correction factors are specified.The results obtained can be applied in technological processes associated with the transportation,storage and use of hydrogen:pumping the working fluid through pipes,storage in tanks,as well as flow processes in the combustion chambers of power plants.
