The vertical heterogeneity of the pore structure in deep coal seams with varying ash yields is a key control for coalbed methane storage and producibility;however,its specific impact on gas adsorption is not clearly d...The vertical heterogeneity of the pore structure in deep coal seams with varying ash yields is a key control for coalbed methane storage and producibility;however,its specific impact on gas adsorption is not clearly defined.The focus of this study is the No.8 coal seam of the Carboniferous Benxi Formation in the Central-Eastern Ordos Basin.By integrating microscopic identification,proximate analysis,gas adsorption(CO_(2),N_(2),and CH_(4)),and the multifractal theory,we quantitatively characterized the nanopore structure(micropores<2 nm and mesopores 2 nm-100 nm)of coal reservoirs with varying ash yields.The results indicate that(1)ash yield is the primary factor that controls the vertical evolution of pore structures in coal seams.In low-ash yield coal seams,the extent of thermal evolution and ash yield jointly constrain the heterogeneity of pore size distribution.In mediumto high-ash yield coal seams,the heterogeneity of pore structure and pore size distribution are predominantly constrained by ash yield.(2)As the ash yield vertically increases,the mesoporous pore volume and specific surface area initially decrease and subsequently increase,while the contribution of micropores to both pore volume and specific surface area continuously diminishes.Consequently,the total pore volume and specific surface area of the coal samples exhibit a two-stage reduction close to an ash yield threshold of approximately 20%.(3)Further,the Langmuir volume for CH_(4)adsorption sharply declines below the 20%threshold,followed by a gradual decrease;in contrast,the Langmuir pressure initially decreases and subsequently increases.Hence,the vertical increase in ash yield constrains the development of pore systems and diminishes pore connectivity,thereby reducing methane adsorption capacity and adversely affecting coalbed methane productivity.(4)Low-ash yield coal reservoirs are characterized by a rapid gas breakthrough and high productivity,whereas medium-ash yield coal reservoirs generally require prolonged depressurization to achieve peak gas production.These findings reveal that in medium-high rank coal,ash yield―and not thermal evolution―is the main factor that controls vertical pore evolution and methane adsorption efficiency.The quantitative ash yield threshold(20%)established in this study provides a practical criterion for evaluating reservoir quality and predicting vertical variations in gas storage potential in the Ordos Basin.展开更多
This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlyin...This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlying physical mechanism. Specifically, for the simplified case of constant stratospheric N^(2), the refractive index square of planetary waves has a theoretical tendency to increase first and then decrease with an increased N^(2), whereas the group velocity weakens. Mechanistically, this behavior can be understood as an intensified suppression of vertical isentropic surface displacement caused by meridional heat transport of planetary waves under strong N^(2) conditions. Observational analysis corroborates this finding, demonstrating a reduction in the vertical-propagation velocity of waves with increased N^(2). A linear, quasi- geostrophic, mid-latitude beta-plane model with a constant background westerly wind and a prescribed N^(2) applicable to the stratosphere is used to obtain analytic solutions. In this model, the planetary waves are initiated by steady energy influx from the lower boundary. The analysis indicates that under strong N^(2) conditions, the amplitude of planetary waves can be sufficiently increased by the effective energy convergence due to the slowing vertical energy transfer, resulting in a streamfunction response in this model that contains more energy. For N^(2) with a quasi-linear vertical variation, the results bear a resemblance to the constant case, except that the wave amplitude and oscillating frequency show some vertical variations.展开更多
Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we d...Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.展开更多
To characterize the spatial patterns of vertical crustal movement of Chinese mainland,GNSS imaging technology was applied to map the tectonic deformation of the region.In this study,the vertical crustal velocities inf...To characterize the spatial patterns of vertical crustal movement of Chinese mainland,GNSS imaging technology was applied to map the tectonic deformation of the region.In this study,the vertical crustal velocities inferred from GNSS data for Chinese mainland over two decades were rigorously estimated.First,by analyzing the vertical displacement time series from continuous GNSS stations and environmental load data,we found that the annual and semi-annual vertical displacements are highly correlated.This indicates that the vertical seasonal variations on the ground surface are mainly caused by environmental loading.After removing the seasonal variations caused by environmental loads from the GNSS time series,we applied an improved PCA technique to filter out common mode errors.Next,we estimated the optimal noise models for the filtered time series and derived the vertical velocity field of Chinese mainland.Finally,we employed an empirical Spatial Structure Function(SSF)to image the tectonic deformation of Chinese mainland.This method effectively mitigates issues with abrupt circular arc-shaped boundaries in GNSS imaging caused by sparse station networks.The imaging results show that vertical crustal deformation in Chinese mainland generally ranges from-3 to 3 mm/yr,with significant spatial variability.The central and northern parts of Qinghai-Xizang Plateau are identified as primary subsidence zones,indicating that plate boundaries and tectonic compression continue to shape the crustal movement in these regions.The major uplift zones are located in northern and central China,likely linked to regional tectonic activity and plate compression.Subsidence deformation in parts of eastern China appears to be influenced by human activities.展开更多
As a key precursor of hydroxyl(OH) radicals, the budget of nitrous acid(HONO) at different altitudes has received extensive attention. In this study, vertically resolved observations of HONO, NO_(2), O_(3), and HCHO w...As a key precursor of hydroxyl(OH) radicals, the budget of nitrous acid(HONO) at different altitudes has received extensive attention. In this study, vertically resolved observations of HONO, NO_(2), O_(3), and HCHO were conducted during an autumn field campaign in Beijing in 2019. The significant correlation between HONO and NO2, along with variations in their ratios across different altitudes, underscores the importance of aerosol surface chemistry in HONO formation and its altitude-dependent behavior. To enhance the model performance, the heterogeneous conversion of NO_(2) and its photochemical enhancement are incorporated into the 1D model. The simulations reveal that the nocturnal HONO production is dominated by the heterogeneous conversion of NO_(2) both at the surface and aloft. During the daytime, groundsurface sources of HONO are mainly driven by nitrate photolysis and light-enhanced heterogeneous conversion of NO_(2).Meanwhile, a large portion of the HONO generated at the surface is transported upwards through vertical mixing. In the higher atmosphere, HONO originates from vertical transport and in situ processes. As precursors of OH radicals, the observed concentrations of HONO, O_(3), and HCHO exhibit distinct diurnal variations and vertical distribution patterns.HONO contributes to OH radical production predominantly during the early morning across all layers and it even becomes the main contributor throughout the daytime in the lowest layer near the ground, while O_(3) and HCHO become more prominent towards midday, especially in the higher layers. These results will be beneficial for a deeper understanding of the atmospheric oxidation process within the urban boundary layer.展开更多
This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shea...This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shear(VWS),using idealized numerical experiments.Results reveal that the SE develops greater radial extent when surface winds align with VWS compared to counter-aligned conditions.In alignment configurations,shear-enhanced surface winds on the right flank amplify surface enthalpy fluxes,thereby elevating boundary-layer entropy within the downshear outer-core region.Subsequently,more vigorous outer rainbands develop,inducing marked acceleration of tangential winds in the outer core preceding SE formation.The resultant radial expansion of supergradient winds near the boundary-layer top triggers widespread convective activity immediately beyond the inner core.Progressive axisymmetrization of this convective forcing ultimately generates an expansive SE structure.展开更多
Understanding the fracture behavior of vertical cracks in piezoelectric semiconductor(PS)structures is vital due to their impacts on device reliability.This study establishes a model for a PS strip with a vertical cra...Understanding the fracture behavior of vertical cracks in piezoelectric semiconductor(PS)structures is vital due to their impacts on device reliability.This study establishes a model for a PS strip with a vertical crack under combined mechanical and electric loading,considering both central and edge cracks.Using Fourier transforms and dislocation density functions,the Mode-Ⅲproblem is converted to Cauchy-type singular integral equations.The crack surface fields,intensity factors,and energy release rate are derived.The accuracy of the proposed model is verified through the finite element(FE)simulation via COMSOL Multiphysics.The results for low electron concentrations align with those of the intrinsic piezoelectric materials,validating the correctness of the present model as well.The combined effects of crack position,applied electric loading,and initial carrier concentration on the crack propagation are analyzed.The normalized electric displacement factor shows heightened sensitivity to crack size,electromechanical loading,and carrier concentration.The crack position significantly influences the crack surface fields and normalized intensity factors due to the boundary proximity effect.展开更多
The dense heterogeneous network provides standardized connectivity and access guarantees for 5G communication services.However,the complex network environment and high level of dynamism pose challenges to network sele...The dense heterogeneous network provides standardized connectivity and access guarantees for 5G communication services.However,the complex network environment and high level of dynamism pose challenges to network selection decisions.Existing vertical handover algorithms often overlook the dynamic nature of user mobility and network condition,resulting in problems such as handover failure and frequent handover,ultimately impacting the quality of the user communication service.To address these problems,we propose an intelligent switching method,iMALSTM-DQN,which integrates an improved Multi-level Associative Long Short-Term Memory model(iMALSTM)with Deep Reinforcement Learning(DRL).The algorithm leverages iMALSTM to predict the global network state in the next moment based on the global user movement trajectory and historical network status information within a region,thereby enhancing the prediction accuracy of network states.Subsequently,based on the predicted network state,we employ the Deep Q Network(DON)model to make handover decisions,adaptively determining the optimal switching and network selection strategy through interaction with the environment.Experimental results demonstrate that the proposed algorithm enhances decision timeliness,significantly reduces the number of switch failures,and alleviates the problem of frequent handovers resulting from network dynamics.展开更多
As the frontier of multidimensional transportation systems,urban air mobility(UAM)is receiving increasing attention from international organizations,governments,and stakeholders in industry and academia owing to its h...As the frontier of multidimensional transportation systems,urban air mobility(UAM)is receiving increasing attention from international organizations,governments,and stakeholders in industry and academia owing to its high efficiency,low carbon footprint,and operational flexibility.Vertical take-off and landing(VTOL)infrastructure is the core facility that enables UAM and is therefore essential for its safe,efficient,and large-scale commercial implementation.However,the key technologies for establishing low-altitude VTOL infrastructure are still nascent,and government,industry,and academia have yet to harmonize the corresponding construction,management,and operation standards.To address this gap,we herein systematically review the related progress and trends,comprehensively surveying the key technologies of establishing VTOL infrastructure serving unmanned aerial vehicles(UAVs)and electric VTOL aircraft from three complementary perspectives of ground-side,airspace-side,and communication,navigation,surveillance,and information services.In the light of future UAM operations characterized by diverse vehicle types and dense air traffic,we propose a conceptual design for a public multioperator VTOL site to provide constructive insights into the sustainable growth of the low-altitude economy.展开更多
BACKGROUND Wound management is an essential part of emergency medicine practice.A good suture technique should deal a complex irregular traumatic wound without any complications of dehiscence/gaping,infection,delayed ...BACKGROUND Wound management is an essential part of emergency medicine practice.A good suture technique should deal a complex irregular traumatic wound without any complications of dehiscence/gaping,infection,delayed wound healing,frequent dressings and further stay in hospital.There is no ideal technique of suturing for any wound.In pursuit of the new techniques,we have introduced a new suturing technique called combined oblique and vertical everting running(COVER)stitch which has showed good healing with less complications.AIM To compare the outcomes between the COVER stitch and conventional suturing group.METHODS In this study,we included 40 cases which were divided into two groups.Group 1 patients were managed by COVER stitch,and group 2 patients underwent conventional suturing for their wounds.The outcomes were measured in terms of scar quality,suturing duration and length of suture material used,suturing related complications and suture removal time which were compared by t-test usingχ^(2) test.RESULTS Better results were seen in COVER stitch than the conventional suturing.COVER group had significantly better results in terms of time taken for suture,amount suture material used and time taken for suture removal compared to the conventional group.No wound related complications were seen in this group.Moreover,scar formed was also better in COVER group.CONCLUSION COVER stitch is another new technique which can be used to deal simple to complex wounds and it is an emerging idea with good healthy scars with less complications.展开更多
During the hydraulic fracturing of shale gas in the southern Sichuan Basin,China,field monitoring data have shown that hydraulic fracture(HF)propagation is restricted by height and cannot sufficiently cover vertical p...During the hydraulic fracturing of shale gas in the southern Sichuan Basin,China,field monitoring data have shown that hydraulic fracture(HF)propagation is restricted by height and cannot sufficiently cover vertical pay layers.The geomechanical behavior of gas shale in this region creates heterogeneity between the layers,which is responsible for the height restriction of HF propagation and limits the safe and efficient development of shale gas reservoirs in this region.To study vertical HF propagation,we conducted a series of laboratory hydraulic fracturing experiments under true triaxial loading.Three kinds of heterogeneity factors were tested:stress,elasticity,and interface strength.Analysis of fracture morphology and injection pressure curves resulted in several findings:(1)four types of vertical HF shapes emerged:Ishape,restricted I-shape,T-shape,and H-shape;(2)HF was induced by weakly cemented interface(s)with height limitations,while a layer under larger stress(e.g.,6 MPa)restricted fracture propagation in the middle layers,and heterogeneous elasticity was resistant;(3)regarding the geomechanical status of Changning middle-deep gas shale,interface strength may be more significant than fracture height.This study demonstrates the role of vertical heterogeneity in limiting fracture height and provides theoretical support for hydraulic fracturing optimization in this region.展开更多
This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associa...This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associated with the total station horizontal distance technique when measuring circular piers,this paper proposes the centroid method.This method calculates verticality by determining the coordinates of the center points at both ends of the pier.Experimental findings indicate that the centroid method achieves accuracy in measuring the verticality of circular piers comparable to the three-point centering method,while offering a faster inspection process.Furthermore,the paper explores the concept of composite verticality and validates the effectiveness of the centroid method in measuring composite verticality and its practical applications through comparative experiments.展开更多
In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach...In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach to facilitate such collaboration,allowing diverse entities to collectively enhance machine learning models without the need to share sensitive training data.However,existing works have highlighted VFL’s susceptibility to privacy inference attacks,where an honest but curious server could potentially reconstruct a client’s raw data from embeddings uploaded by the client.This vulnerability poses a significant threat to VFL-based intelligent railway transportation systems.In this paper,we introduce SensFL,a novel privacy-enhancing method to against privacy inference attacks in VFL.Specifically,SensFL integrates regularization of the sensitivity of embeddings to the original data into the model training process,effectively limiting the information contained in shared embeddings.By reducing the sensitivity of embeddings to the original data,SensFL can effectively resist reverse privacy attacks and prevent the reconstruction of the original data from the embeddings.Extensive experiments were conducted on four distinct datasets and three different models to demonstrate the efficacy of SensFL.Experiment results show that SensFL can effectively mitigate privacy inference attacks while maintaining the accuracy of the primary learning task.These results underscore SensFL’s potential to advance privacy protection technologies within VFL-based intelligent railway systems,addressing critical security concerns in collaborative learning environments.展开更多
Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation...Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation of rectangular jacked pipes and the distribution of the earth pressure on jacked pipes,we present an analytical solution for predicting the vertical earth pressure on deep-buried rectangular pipe jacking tunnels,incorporating the tunnelling-induced ground loss distribution.Our proposed analytical model consists of the upper multi-layer parabolic soil arch and the lower friction arch.The key parameters(i.e.,width and height of friction arch B and height of parabolic soil arch H 1)are determined according to the existing research,and an analytical solution for K l is derived based on the distribution characteristics of the principal stress rotation angle.With consideration for the transition effect of the mechanical characteristics of the parabolic arch zone,an analytical solution for soil load transfer is derived.The prediction results of our analytical solution are compared with tests and simulation results to validate the effectiveness of the proposed analytical solution.Finally,the effects of different parameters on the soil pressure are discussed.展开更多
In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates t...In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates the vertical growth process of strike-slip faults through field outcrop observations in the Keping area,interpretation of seismic data from the Fuman Oilfield,Tarim Basim,NW China,and structural physical simulation experiments.The results are obtained mainly in four aspects.First,field outcrops and ultra-deep seismic profiles indicate a three-layer structure within the strike-slip fault,consisting of fault core,fracture zone and primary rock.The fault core can be classified into three parts vertically:fracture-cavity unit,fault clay and breccia zone.The distribution of fracture-cavity units demonstrates a distinct pattern of vertical stratification,owing to the structural characteristics and growth process of the slip-strike fault.Second,the ultra-deep seismic profiles show multiple fracture-cavity units in the strike-slip fault zone.These units can be classified into four types:top fractured,middle connected,deep terminated,and intra-layer fractured.Third,structural physical simulation experiments and ultra-deep seismic data interpretation reveal that the strike-slip faults have evolved vertically in three stages:segmental rupture,vertical growth,and connection and extension.The particle image velocimetry detection demonstrates that the initial fracture of the fault zone occurred at the top or bottom and then evolved into cavities gradually along with the fault growth,accompanied by the emergence of new fractures in the middle part of the strata,which subsequently connected with the deep and shallow cavities to form a complete fault zone.Fourth,the ultra-deep carbonate strata primarily develop three types of fractured-cavity reservoirs:flower-shaped fracture,large and deep fault and staggered overlap.The first two types are larger in size with better reservoir conditions,suggesting a significant exploration potential.展开更多
Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batterie...Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.展开更多
Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Cu...Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Currently,there is no commercial vaccine or specific treatment available to prevent ZIKV infection.Therefore,controlling the epidemic's spread relies on preventing mosquitoes from transmitting the virus.Although various studies have explored the transmission of ZIKV between mosquitoes and vertebrate hosts,comprehensive research on potential mosquito-to-mosquito transmission of ZIKV remains limited.In this study,we conducted systematic laboratory investigations to assess the ability of ZIKV to spread among mosquitoes,and to evaluate the impact of ZIKV infection on mosquito development.Our findings revealed that ZIKV can be transmitted between Aedes aegypti mosquitoes both vertically and horizontally,through oviposition and contact between mosquitoes of the same or opposite sex.Additionally,we observed that ZIKV infection resulted in a reduction in the number of mosquito eggs but an increase in their size.The widespread distribution of ZIKV in infected mosquitoes and the altered levels of hormone related genes following viral infection were noted,which may contribute to viral transmission among mosquitoes and affect mosquito development.This research provides systematic experimental evidence of ZIKV transmission among mosquitoes,which is crucial for developing novel strategies to disrupt the spread of orthoflaviviruses and other mosquitoborne pathogens.展开更多
To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid d...To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid dynamics(CFD)analysis.First,a CFD analysis of a two-bladed VAWT equipped with a NACA 0012 airfoil is conducted.The thrust and power coefficients are validated through experiments.Second,the blade force and velocity data at monitoring points are collected.The AOA at different azimuth angles is determined by removing the blade self-induction at the monitoring point.Then,the lift and drag coefficients as a function of AOA are extracted.Results show that this method is independent of the monitoring points selection located at certain distance to the blades and the extracted dynamic stall hysteresis is more precise than the one with the“usual”method without considering the self-induction from bound vortices.展开更多
The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmosphe...The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmospheric pressure,which is primarily variable in the vertical direction.Current atmospheric pressure is either site-specific or has limited spatial coverage,necessitating vertical corrections for broader applicability.This study introduces a model that uses a Gaussian function for the vertical correction of atmospheric pressure when in situ meteorological observations are unavailable.Validation with the fifth-generation European Centre for Medium-Range Weather Forecasts reanalysis(ERA5)reveals an average Bias and RMS for the new model of 0.31 h Pa and 2.96 h Pa,respectively.This corresponds to improvements of 37.5%and 80.3%in terms of RMS compared to two commonly used models(T0and Tvmodels)that require in situ meteorological observations,respectively.Additional validation with radiosonde data shows an average Bias and RMS of 1.85 h Pa and 4.87 h Pa,corresponding to the improvement of 42.8%and 71.1%in RMS compared with T0and Tv models,respectively.These accuracies are sufficient for calculating ZHD to an accuracy of 1 mm by performing atmospheric pressure vertical correction.The new model can correct atmospheric pressure from meteorological stations or numerical weather forecasts to different heights of the troposphere.展开更多
van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type phot...van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type photodetectors are not compatible with large-areaarray fabrication and show unimpressive performance in self-powered mode.Herein,vertical 1D GaN nanorods arrays(NRAs)/2D MoS_(2)/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly.The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W^(−1)and a high detectivity of 1.2×10^(11)Jones,as well as a fast response speed of 54/71μs,thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction.Notably,the strain-tunable photodetection performances of device have been demonstrated.Impressively,the device at−0.78%strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W^(−1),a detectivity of 2.6×10^(11)Jones,and response times of 40/45μs,which are superior to the state-of-the-art self-powered flexible photodetectors.This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection,which performs well in flexible sensors.展开更多
基金sponsored by the National Natural Science Foundation of China(Grant No.42202205)Natural Science Foundation of Shandong Province,China(Grant No.ZR2021QD072).-。
文摘The vertical heterogeneity of the pore structure in deep coal seams with varying ash yields is a key control for coalbed methane storage and producibility;however,its specific impact on gas adsorption is not clearly defined.The focus of this study is the No.8 coal seam of the Carboniferous Benxi Formation in the Central-Eastern Ordos Basin.By integrating microscopic identification,proximate analysis,gas adsorption(CO_(2),N_(2),and CH_(4)),and the multifractal theory,we quantitatively characterized the nanopore structure(micropores<2 nm and mesopores 2 nm-100 nm)of coal reservoirs with varying ash yields.The results indicate that(1)ash yield is the primary factor that controls the vertical evolution of pore structures in coal seams.In low-ash yield coal seams,the extent of thermal evolution and ash yield jointly constrain the heterogeneity of pore size distribution.In mediumto high-ash yield coal seams,the heterogeneity of pore structure and pore size distribution are predominantly constrained by ash yield.(2)As the ash yield vertically increases,the mesoporous pore volume and specific surface area initially decrease and subsequently increase,while the contribution of micropores to both pore volume and specific surface area continuously diminishes.Consequently,the total pore volume and specific surface area of the coal samples exhibit a two-stage reduction close to an ash yield threshold of approximately 20%.(3)Further,the Langmuir volume for CH_(4)adsorption sharply declines below the 20%threshold,followed by a gradual decrease;in contrast,the Langmuir pressure initially decreases and subsequently increases.Hence,the vertical increase in ash yield constrains the development of pore systems and diminishes pore connectivity,thereby reducing methane adsorption capacity and adversely affecting coalbed methane productivity.(4)Low-ash yield coal reservoirs are characterized by a rapid gas breakthrough and high productivity,whereas medium-ash yield coal reservoirs generally require prolonged depressurization to achieve peak gas production.These findings reveal that in medium-high rank coal,ash yield―and not thermal evolution―is the main factor that controls vertical pore evolution and methane adsorption efficiency.The quantitative ash yield threshold(20%)established in this study provides a practical criterion for evaluating reservoir quality and predicting vertical variations in gas storage potential in the Ordos Basin.
基金supported by the National Natural Science Foundation of China(Grant No.42261134532,42405059,and U2342212)。
文摘This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlying physical mechanism. Specifically, for the simplified case of constant stratospheric N^(2), the refractive index square of planetary waves has a theoretical tendency to increase first and then decrease with an increased N^(2), whereas the group velocity weakens. Mechanistically, this behavior can be understood as an intensified suppression of vertical isentropic surface displacement caused by meridional heat transport of planetary waves under strong N^(2) conditions. Observational analysis corroborates this finding, demonstrating a reduction in the vertical-propagation velocity of waves with increased N^(2). A linear, quasi- geostrophic, mid-latitude beta-plane model with a constant background westerly wind and a prescribed N^(2) applicable to the stratosphere is used to obtain analytic solutions. In this model, the planetary waves are initiated by steady energy influx from the lower boundary. The analysis indicates that under strong N^(2) conditions, the amplitude of planetary waves can be sufficiently increased by the effective energy convergence due to the slowing vertical energy transfer, resulting in a streamfunction response in this model that contains more energy. For N^(2) with a quasi-linear vertical variation, the results bear a resemblance to the constant case, except that the wave amplitude and oscillating frequency show some vertical variations.
基金financially supported by the National Nature Science Foundation of China (62504130)National Key Research and Development Program of China (2018YFB0704100)+3 种基金the Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong (Y01256331)the Technology Development Project of Henan Province (252102240047)the Pico Center at SUSTech CRF which receives support from the Presidential FundDevelopment and Reform Commission of Shenzhen Municipality
文摘Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.
基金National Natural Science Foundation of China(42274012,42004001)the Science and Technology Innovation Project of Anhui Surveying and Mapping Bureau(2025-KJ-08)+1 种基金the Open Fund of Wuhan Gravitation and Solid Earth Tides,National Observation and Research Station(WHYWZ202107)the Fundamental Research Funds for the Central Universities(JZ2022HGTB0268)。
文摘To characterize the spatial patterns of vertical crustal movement of Chinese mainland,GNSS imaging technology was applied to map the tectonic deformation of the region.In this study,the vertical crustal velocities inferred from GNSS data for Chinese mainland over two decades were rigorously estimated.First,by analyzing the vertical displacement time series from continuous GNSS stations and environmental load data,we found that the annual and semi-annual vertical displacements are highly correlated.This indicates that the vertical seasonal variations on the ground surface are mainly caused by environmental loading.After removing the seasonal variations caused by environmental loads from the GNSS time series,we applied an improved PCA technique to filter out common mode errors.Next,we estimated the optimal noise models for the filtered time series and derived the vertical velocity field of Chinese mainland.Finally,we employed an empirical Spatial Structure Function(SSF)to image the tectonic deformation of Chinese mainland.This method effectively mitigates issues with abrupt circular arc-shaped boundaries in GNSS imaging caused by sparse station networks.The imaging results show that vertical crustal deformation in Chinese mainland generally ranges from-3 to 3 mm/yr,with significant spatial variability.The central and northern parts of Qinghai-Xizang Plateau are identified as primary subsidence zones,indicating that plate boundaries and tectonic compression continue to shape the crustal movement in these regions.The major uplift zones are located in northern and central China,likely linked to regional tectonic activity and plate compression.Subsidence deformation in parts of eastern China appears to be influenced by human activities.
基金supported by the National Natural Science Foundation of China (Grant Nos.42075097,42177081 and 22176037)。
文摘As a key precursor of hydroxyl(OH) radicals, the budget of nitrous acid(HONO) at different altitudes has received extensive attention. In this study, vertically resolved observations of HONO, NO_(2), O_(3), and HCHO were conducted during an autumn field campaign in Beijing in 2019. The significant correlation between HONO and NO2, along with variations in their ratios across different altitudes, underscores the importance of aerosol surface chemistry in HONO formation and its altitude-dependent behavior. To enhance the model performance, the heterogeneous conversion of NO_(2) and its photochemical enhancement are incorporated into the 1D model. The simulations reveal that the nocturnal HONO production is dominated by the heterogeneous conversion of NO_(2) both at the surface and aloft. During the daytime, groundsurface sources of HONO are mainly driven by nitrate photolysis and light-enhanced heterogeneous conversion of NO_(2).Meanwhile, a large portion of the HONO generated at the surface is transported upwards through vertical mixing. In the higher atmosphere, HONO originates from vertical transport and in situ processes. As precursors of OH radicals, the observed concentrations of HONO, O_(3), and HCHO exhibit distinct diurnal variations and vertical distribution patterns.HONO contributes to OH radical production predominantly during the early morning across all layers and it even becomes the main contributor throughout the daytime in the lowest layer near the ground, while O_(3) and HCHO become more prominent towards midday, especially in the higher layers. These results will be beneficial for a deeper understanding of the atmospheric oxidation process within the urban boundary layer.
基金jointly supported by the National Natural Science Foundation of China[grant numbers U2342202,42175005,and 42175016]the Qing Lan Project[grant number R2023Q06]。
文摘This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shear(VWS),using idealized numerical experiments.Results reveal that the SE develops greater radial extent when surface winds align with VWS compared to counter-aligned conditions.In alignment configurations,shear-enhanced surface winds on the right flank amplify surface enthalpy fluxes,thereby elevating boundary-layer entropy within the downshear outer-core region.Subsequently,more vigorous outer rainbands develop,inducing marked acceleration of tangential winds in the outer core preceding SE formation.The resultant radial expansion of supergradient winds near the boundary-layer top triggers widespread convective activity immediately beyond the inner core.Progressive axisymmetrization of this convective forcing ultimately generates an expansive SE structure.
基金Project supported by the Guangdong Basic and Applied Basic Research Foundation of China(Nos.2022B1515020099 and 2024A1515240026)the National Natural Science Foundation of China(No.12372147)the Fundamental Research Funds for the Central Universities of China(No.HIT.OCEF.2024019)。
文摘Understanding the fracture behavior of vertical cracks in piezoelectric semiconductor(PS)structures is vital due to their impacts on device reliability.This study establishes a model for a PS strip with a vertical crack under combined mechanical and electric loading,considering both central and edge cracks.Using Fourier transforms and dislocation density functions,the Mode-Ⅲproblem is converted to Cauchy-type singular integral equations.The crack surface fields,intensity factors,and energy release rate are derived.The accuracy of the proposed model is verified through the finite element(FE)simulation via COMSOL Multiphysics.The results for low electron concentrations align with those of the intrinsic piezoelectric materials,validating the correctness of the present model as well.The combined effects of crack position,applied electric loading,and initial carrier concentration on the crack propagation are analyzed.The normalized electric displacement factor shows heightened sensitivity to crack size,electromechanical loading,and carrier concentration.The crack position significantly influences the crack surface fields and normalized intensity factors due to the boundary proximity effect.
基金National Key Research and Development Program of China(No.2022YFB3903404,2024YFC3015403)National Natural Science Foundation of China(NSFC No.42271431,42271425)Hubei Province Major Science and Technology Innovation Program(2024BAA011)。
文摘The dense heterogeneous network provides standardized connectivity and access guarantees for 5G communication services.However,the complex network environment and high level of dynamism pose challenges to network selection decisions.Existing vertical handover algorithms often overlook the dynamic nature of user mobility and network condition,resulting in problems such as handover failure and frequent handover,ultimately impacting the quality of the user communication service.To address these problems,we propose an intelligent switching method,iMALSTM-DQN,which integrates an improved Multi-level Associative Long Short-Term Memory model(iMALSTM)with Deep Reinforcement Learning(DRL).The algorithm leverages iMALSTM to predict the global network state in the next moment based on the global user movement trajectory and historical network status information within a region,thereby enhancing the prediction accuracy of network states.Subsequently,based on the predicted network state,we employ the Deep Q Network(DON)model to make handover decisions,adaptively determining the optimal switching and network selection strategy through interaction with the environment.Experimental results demonstrate that the proposed algorithm enhances decision timeliness,significantly reduces the number of switch failures,and alleviates the problem of frequent handovers resulting from network dynamics.
基金supported by the National Natural Science Foundation of China(No.U2333214).
文摘As the frontier of multidimensional transportation systems,urban air mobility(UAM)is receiving increasing attention from international organizations,governments,and stakeholders in industry and academia owing to its high efficiency,low carbon footprint,and operational flexibility.Vertical take-off and landing(VTOL)infrastructure is the core facility that enables UAM and is therefore essential for its safe,efficient,and large-scale commercial implementation.However,the key technologies for establishing low-altitude VTOL infrastructure are still nascent,and government,industry,and academia have yet to harmonize the corresponding construction,management,and operation standards.To address this gap,we herein systematically review the related progress and trends,comprehensively surveying the key technologies of establishing VTOL infrastructure serving unmanned aerial vehicles(UAVs)and electric VTOL aircraft from three complementary perspectives of ground-side,airspace-side,and communication,navigation,surveillance,and information services.In the light of future UAM operations characterized by diverse vehicle types and dense air traffic,we propose a conceptual design for a public multioperator VTOL site to provide constructive insights into the sustainable growth of the low-altitude economy.
文摘BACKGROUND Wound management is an essential part of emergency medicine practice.A good suture technique should deal a complex irregular traumatic wound without any complications of dehiscence/gaping,infection,delayed wound healing,frequent dressings and further stay in hospital.There is no ideal technique of suturing for any wound.In pursuit of the new techniques,we have introduced a new suturing technique called combined oblique and vertical everting running(COVER)stitch which has showed good healing with less complications.AIM To compare the outcomes between the COVER stitch and conventional suturing group.METHODS In this study,we included 40 cases which were divided into two groups.Group 1 patients were managed by COVER stitch,and group 2 patients underwent conventional suturing for their wounds.The outcomes were measured in terms of scar quality,suturing duration and length of suture material used,suturing related complications and suture removal time which were compared by t-test usingχ^(2) test.RESULTS Better results were seen in COVER stitch than the conventional suturing.COVER group had significantly better results in terms of time taken for suture,amount suture material used and time taken for suture removal compared to the conventional group.No wound related complications were seen in this group.Moreover,scar formed was also better in COVER group.CONCLUSION COVER stitch is another new technique which can be used to deal simple to complex wounds and it is an emerging idea with good healthy scars with less complications.
基金supported by the National Key R&D Program of China(Grant No:2023YFF0614100)the National Natural Science Foundation of China(Grant Nos:52204005,52192622,52374004)the Science and Technology Project of CNPC,China(Grant No:2023ZZ21).
文摘During the hydraulic fracturing of shale gas in the southern Sichuan Basin,China,field monitoring data have shown that hydraulic fracture(HF)propagation is restricted by height and cannot sufficiently cover vertical pay layers.The geomechanical behavior of gas shale in this region creates heterogeneity between the layers,which is responsible for the height restriction of HF propagation and limits the safe and efficient development of shale gas reservoirs in this region.To study vertical HF propagation,we conducted a series of laboratory hydraulic fracturing experiments under true triaxial loading.Three kinds of heterogeneity factors were tested:stress,elasticity,and interface strength.Analysis of fracture morphology and injection pressure curves resulted in several findings:(1)four types of vertical HF shapes emerged:Ishape,restricted I-shape,T-shape,and H-shape;(2)HF was induced by weakly cemented interface(s)with height limitations,while a layer under larger stress(e.g.,6 MPa)restricted fracture propagation in the middle layers,and heterogeneous elasticity was resistant;(3)regarding the geomechanical status of Changning middle-deep gas shale,interface strength may be more significant than fracture height.This study demonstrates the role of vertical heterogeneity in limiting fracture height and provides theoretical support for hydraulic fracturing optimization in this region.
文摘This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associated with the total station horizontal distance technique when measuring circular piers,this paper proposes the centroid method.This method calculates verticality by determining the coordinates of the center points at both ends of the pier.Experimental findings indicate that the centroid method achieves accuracy in measuring the verticality of circular piers comparable to the three-point centering method,while offering a faster inspection process.Furthermore,the paper explores the concept of composite verticality and validates the effectiveness of the centroid method in measuring composite verticality and its practical applications through comparative experiments.
基金supported by Systematic Major Project of Shuohuang Railway Development Co.,Ltd.,National Energy Group(Grant Number:SHTL-23-31)Beijing Natural Science Foundation(U22B2027).
文摘In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach to facilitate such collaboration,allowing diverse entities to collectively enhance machine learning models without the need to share sensitive training data.However,existing works have highlighted VFL’s susceptibility to privacy inference attacks,where an honest but curious server could potentially reconstruct a client’s raw data from embeddings uploaded by the client.This vulnerability poses a significant threat to VFL-based intelligent railway transportation systems.In this paper,we introduce SensFL,a novel privacy-enhancing method to against privacy inference attacks in VFL.Specifically,SensFL integrates regularization of the sensitivity of embeddings to the original data into the model training process,effectively limiting the information contained in shared embeddings.By reducing the sensitivity of embeddings to the original data,SensFL can effectively resist reverse privacy attacks and prevent the reconstruction of the original data from the embeddings.Extensive experiments were conducted on four distinct datasets and three different models to demonstrate the efficacy of SensFL.Experiment results show that SensFL can effectively mitigate privacy inference attacks while maintaining the accuracy of the primary learning task.These results underscore SensFL’s potential to advance privacy protection technologies within VFL-based intelligent railway systems,addressing critical security concerns in collaborative learning environments.
基金Project(2022YJS073)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2024YFE0198500)supported by the National Key Research and Development Program of China:Intergovernmental International Science and Technology Innovation CooperationProject(U2469207)supported by the National Natural Science Foundation Railway Innovation and Development Joint Fund Project,China。
文摘Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation of rectangular jacked pipes and the distribution of the earth pressure on jacked pipes,we present an analytical solution for predicting the vertical earth pressure on deep-buried rectangular pipe jacking tunnels,incorporating the tunnelling-induced ground loss distribution.Our proposed analytical model consists of the upper multi-layer parabolic soil arch and the lower friction arch.The key parameters(i.e.,width and height of friction arch B and height of parabolic soil arch H 1)are determined according to the existing research,and an analytical solution for K l is derived based on the distribution characteristics of the principal stress rotation angle.With consideration for the transition effect of the mechanical characteristics of the parabolic arch zone,an analytical solution for soil load transfer is derived.The prediction results of our analytical solution are compared with tests and simulation results to validate the effectiveness of the proposed analytical solution.Finally,the effects of different parameters on the soil pressure are discussed.
基金Supported by the National Natural Science Foundation of China(42362026)Key R&D Project of Xinjiang Uygur Autonomous Region(2024B01015).
文摘In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates the vertical growth process of strike-slip faults through field outcrop observations in the Keping area,interpretation of seismic data from the Fuman Oilfield,Tarim Basim,NW China,and structural physical simulation experiments.The results are obtained mainly in four aspects.First,field outcrops and ultra-deep seismic profiles indicate a three-layer structure within the strike-slip fault,consisting of fault core,fracture zone and primary rock.The fault core can be classified into three parts vertically:fracture-cavity unit,fault clay and breccia zone.The distribution of fracture-cavity units demonstrates a distinct pattern of vertical stratification,owing to the structural characteristics and growth process of the slip-strike fault.Second,the ultra-deep seismic profiles show multiple fracture-cavity units in the strike-slip fault zone.These units can be classified into four types:top fractured,middle connected,deep terminated,and intra-layer fractured.Third,structural physical simulation experiments and ultra-deep seismic data interpretation reveal that the strike-slip faults have evolved vertically in three stages:segmental rupture,vertical growth,and connection and extension.The particle image velocimetry detection demonstrates that the initial fracture of the fault zone occurred at the top or bottom and then evolved into cavities gradually along with the fault growth,accompanied by the emergence of new fractures in the middle part of the strata,which subsequently connected with the deep and shallow cavities to form a complete fault zone.Fourth,the ultra-deep carbonate strata primarily develop three types of fractured-cavity reservoirs:flower-shaped fracture,large and deep fault and staggered overlap.The first two types are larger in size with better reservoir conditions,suggesting a significant exploration potential.
基金National Key R&D Program of China,Grant/Award Number:2023YFB2503900National Natural Science Foundation of China,Grant/Award Number:12172143Shenzhen Science and Technology Program,Grant/Award Numbers:JCYJ20220818100418040,JCYJ20220530160816038。
文摘Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.
基金supported by National Key Research and Development Program of China,China(2024YFD1800102,2022YFD1800105 and 2022YFD1801500)National Natural Science Foundation of China,China(32372993 and 32030107)Fundamental Research Funds for the Central Universities,China(2662023PY005).
文摘Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Currently,there is no commercial vaccine or specific treatment available to prevent ZIKV infection.Therefore,controlling the epidemic's spread relies on preventing mosquitoes from transmitting the virus.Although various studies have explored the transmission of ZIKV between mosquitoes and vertebrate hosts,comprehensive research on potential mosquito-to-mosquito transmission of ZIKV remains limited.In this study,we conducted systematic laboratory investigations to assess the ability of ZIKV to spread among mosquitoes,and to evaluate the impact of ZIKV infection on mosquito development.Our findings revealed that ZIKV can be transmitted between Aedes aegypti mosquitoes both vertically and horizontally,through oviposition and contact between mosquitoes of the same or opposite sex.Additionally,we observed that ZIKV infection resulted in a reduction in the number of mosquito eggs but an increase in their size.The widespread distribution of ZIKV in infected mosquitoes and the altered levels of hormone related genes following viral infection were noted,which may contribute to viral transmission among mosquitoes and affect mosquito development.This research provides systematic experimental evidence of ZIKV transmission among mosquitoes,which is crucial for developing novel strategies to disrupt the spread of orthoflaviviruses and other mosquitoborne pathogens.
文摘To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid dynamics(CFD)analysis.First,a CFD analysis of a two-bladed VAWT equipped with a NACA 0012 airfoil is conducted.The thrust and power coefficients are validated through experiments.Second,the blade force and velocity data at monitoring points are collected.The AOA at different azimuth angles is determined by removing the blade self-induction at the monitoring point.Then,the lift and drag coefficients as a function of AOA are extracted.Results show that this method is independent of the monitoring points selection located at certain distance to the blades and the extracted dynamic stall hysteresis is more precise than the one with the“usual”method without considering the self-induction from bound vortices.
基金supported by the National Natural Science Foundation of China(42304018)the National Natural Science Foundation of China(42330105,42064002,42074035)+3 种基金the Guangxi Natural Science Foundation of China(Guike AD23026177,2020GXNSFBA297145)the Foundation of Guilin University of Technology(GUTQDJJ6616032)Guangxi Key Laboratory of Spatial Information and Geomatics(21238-21-05)the Innovation Project of Guangxi Graduate Education(YCSW2023341)。
文摘The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmospheric pressure,which is primarily variable in the vertical direction.Current atmospheric pressure is either site-specific or has limited spatial coverage,necessitating vertical corrections for broader applicability.This study introduces a model that uses a Gaussian function for the vertical correction of atmospheric pressure when in situ meteorological observations are unavailable.Validation with the fifth-generation European Centre for Medium-Range Weather Forecasts reanalysis(ERA5)reveals an average Bias and RMS for the new model of 0.31 h Pa and 2.96 h Pa,respectively.This corresponds to improvements of 37.5%and 80.3%in terms of RMS compared to two commonly used models(T0and Tvmodels)that require in situ meteorological observations,respectively.Additional validation with radiosonde data shows an average Bias and RMS of 1.85 h Pa and 4.87 h Pa,corresponding to the improvement of 42.8%and 71.1%in RMS compared with T0and Tv models,respectively.These accuracies are sufficient for calculating ZHD to an accuracy of 1 mm by performing atmospheric pressure vertical correction.The new model can correct atmospheric pressure from meteorological stations or numerical weather forecasts to different heights of the troposphere.
基金supported by the National Key Research and Development Program of China(No.2022YFB3604500,No.2022YFB3604501)the National Natural Science Foundation of China(No.52172141)the Technology Development Project of Shanxi-Zheda Institude of Advanced Materials and Chemical Engineering(No.2022SX-TD017).
文摘van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type photodetectors are not compatible with large-areaarray fabrication and show unimpressive performance in self-powered mode.Herein,vertical 1D GaN nanorods arrays(NRAs)/2D MoS_(2)/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly.The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W^(−1)and a high detectivity of 1.2×10^(11)Jones,as well as a fast response speed of 54/71μs,thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction.Notably,the strain-tunable photodetection performances of device have been demonstrated.Impressively,the device at−0.78%strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W^(−1),a detectivity of 2.6×10^(11)Jones,and response times of 40/45μs,which are superior to the state-of-the-art self-powered flexible photodetectors.This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection,which performs well in flexible sensors.
