Path planning is crucial for autonomous flight of fixed-wing Unmanned Aerial Vehicles(UAVs).However,due to the high-speed flight and complex control of fixed-wing UAVs,ensuring the feasibility and safety of planned pa...Path planning is crucial for autonomous flight of fixed-wing Unmanned Aerial Vehicles(UAVs).However,due to the high-speed flight and complex control of fixed-wing UAVs,ensuring the feasibility and safety of planned paths in complex environments is challenging.This paper proposes a feasible path planning algorithm named Closed-loop Radial Ray A^(*)(CL-RaA^(*)).The core components of the CL-RaA^(*)include an adaptive variable-step-size path search and a just-in-time expansion primitive.The former enables fast path search in complex environments,while the latter ensures the feasibility of the generated paths.By integrating these two components and conducting safety checks on the trajectories to be expanded,the CL-RaA^(*)can rapidly generate safe and feasible paths that satisfy the differential constraints that comprehensively consider the dynamics and control characteristics of six-degree-of-freedom fixed-wing UAVs.The final performance tests and simulation validations demonstrate that the CL-RaA^(*)can generate safe and feasible paths in various environments.Compared to feasible path planning algorithms that use the rapidlyexploring random trees,the CL-RaA^(*)not only ensures deterministic planning results in the same scenarios but also generates smoother feasible paths for fixed-wing UAVs more efficiently.In environments with dense grid obstacles,the feasible paths generated by the CL-RaA^(*)are more conducive to UAV tracking compared to those planned using Dubins curves.展开更多
The scratching mechanism of polycrystallineγ-TiAl alloy was investigated at the atomic scale using the molecular dynamics method,with a focus on the influence of different grain sizes.The analysis encompassed tribolo...The scratching mechanism of polycrystallineγ-TiAl alloy was investigated at the atomic scale using the molecular dynamics method,with a focus on the influence of different grain sizes.The analysis encompassed tribological characteristics,scratch morphology,subsurface defect distribution,temperature variations,and stress states during the scratching process.The findings indicate that the scratch force,number of recovered atoms,and pile-up height exhibit abrupt changes when the critical size is 9.41 nm due to the influence of the inverse Hall-Petch effect.Variations in the number of grain boundaries and randomness of grain orientation result in different accumulation patterns on the scratch surface.Notably,single crystal materials and those with 3.73 nm in grain size display more regular surface morphology.Furthermore,smaller grain size leads to an increase in average coefficient of friction,removed atoms number,and wear rate.While it also causes higher temperatures with a larger range of distributions.Due to the barrier effect of grain boundaries,smaller grains exhibit reduced microscopic defects.Additionally,average von Mises stress and hydrostatic compressive stress at the indenter tip decrease as grain size decreases owing to grain boundary obstruction.展开更多
Liposomes serve as critical carriers for drugs and vaccines,with their biological effects influenced by their size.The microfluidic method,renowned for its precise control,reproducibility,and scalability,has been wide...Liposomes serve as critical carriers for drugs and vaccines,with their biological effects influenced by their size.The microfluidic method,renowned for its precise control,reproducibility,and scalability,has been widely employed for liposome preparation.Although some studies have explored factors affecting liposomal size in microfluidic processes,most focus on small-sized liposomes,predominantly through experimental data analysis.However,the production of larger liposomes,which are equally significant,remains underexplored.In this work,we thoroughly investigate multiple variables influencing liposome size during microfluidic preparation and develop a machine learning(ML)model capable of accurately predicting liposomal size.Experimental validation was conducted using a staggered herringbone micromixer(SHM)chip.Our findings reveal that most investigated variables significantly influence liposomal size,often interrelating in complex ways.We evaluated the predictive performance of several widely-used ML algorithms,including ensemble methods,through cross-validation(CV)for both lipo-some size and polydispersity index(PDI).A standalone dataset was experimentally validated to assess the accuracy of the ML predictions,with results indicating that ensemble algorithms provided the most reliable predictions.Specifically,gradient boosting was selected for size prediction,while random forest was employed for PDI prediction.We successfully produced uniform large(600 nm)and small(100 nm)liposomes using the optimised experimental conditions derived from the ML models.In conclusion,this study presents a robust methodology that enables precise control over liposome size distribution,of-fering valuable insights for medicinal research applications.展开更多
As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To...As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.展开更多
Understanding the fracture behavior of rocks subjected to temperature and accounting for the rock's texture is vital for safe and efficient design.Prior studies have often focused on isolated aspects of rock fract...Understanding the fracture behavior of rocks subjected to temperature and accounting for the rock's texture is vital for safe and efficient design.Prior studies have often focused on isolated aspects of rock fracture behavior,neglecting the combined influence of grain size and temperature on fracture behavior.This study employs specimens based on the particle flow code-grain based model to scrutinize the influence of temperature and grain size discrepancies on the fracture characteristics of sandstone.In pursuit of this goal,we manufactured ninety-six semi-circular bend specimens with grain sizes spanning from 0.5 mm to 1.5 mm,predicated on the mineral composition of sandstone.Recognizing the significance of intra-granular and inter-granular fractures,the grains were considered deformable and susceptible to breakage.The numerical model was calibrated using the results of uniaxial compressive strength(UCS)and Brazilian tests.We implemented thermo-mechanical coupled analysis to simulate mode Ⅰ,mode Ⅱ,and mixed mode(Ⅰ-Ⅱ)fracture toughness tests and subsequently studied alterations in the fracture behavior of sandstone at temperatures from 25℃ to 700℃.Our findings revealed increased fracture toughness as the temperature escalated from 25℃ to 200℃.However,beyond the threshold of 200℃,we noted a decline in fracture toughness.More specifically,the drop in mode Ⅰ fracture toughness was more pronounced in specimens with finer grains than those with coarser grains.Contrarily,the trend was reversed for mode Ⅱ fracture toughness.In contrast,the reduction of mixed mode(Ⅰ-Ⅱ)fracture toughness seemed almost linear across all grain sizes.Furthermore,we identified a correlation between temperature and grain size and their collective impact on crack propagation patterns.Comparing our results with established theoretical benchmarks,we confirmed that both temperature and grain size variations influence the fracture envelopes of sandstone.展开更多
A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which ca...A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.展开更多
It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size...It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size(grain size,GS)or the external size(geometric size).The coupled effect of GS and geometric size on the functional properties has not been clearly understood yet.In this work,the super-elasticity,one-way,and stress-assisted two-way shape memory effects of the polycrystalline NiTi SMAs with different aspect ratios(length/width for the gauge section)and different GSs are investigated based on the phase field method.The coupled effect of the aspect ratio and GS on the functional properties is adequately revealed.The simulated results indicate that when the aspect ratio is lower than about 4:1,the stress biaxiality and stress heterogeneity in the gauge section of the sample become more and more obvious with decreasing the aspect ratio,which can significantly influence the microstructure evolution in the process involving external stress.Therefore,the corresponding functional property is strongly dependent on the aspect ratio.With decreasing the GS and the aspect ratio(to be lower than 4:1),both the aspect ratio and GS can affect the MT or martensite reorientation in each grain and the interaction among grains.Thus,due to the strong internal constraint(i.e.,the constraint of grain boundary)and the external constraint(i.e.,the constraint of geometric boundary),the capabilities of the functional properties of NiTi SMAs are gradually weakened and highly dependent on these two factors.展开更多
Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising techn...Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.展开更多
Knowing the influence of the size of datasets for regression models can help in improving the accuracy of a solar power forecast and make the most out of renewable energy systems.This research explores the influence o...Knowing the influence of the size of datasets for regression models can help in improving the accuracy of a solar power forecast and make the most out of renewable energy systems.This research explores the influence of dataset size on the accuracy and reliability of regression models for solar power prediction,contributing to better forecasting methods.The study analyzes data from two solar panels,aSiMicro03036 and aSiTandem72-46,over 7,14,17,21,28,and 38 days,with each dataset comprising five independent and one dependent parameter,and split 80–20 for training and testing.Results indicate that Random Forest consistently outperforms other models,achieving the highest correlation coefficient of 0.9822 and the lowest Mean Absolute Error(MAE)of 2.0544 on the aSiTandem72-46 panel with 21 days of data.For the aSiMicro03036 panel,the best MAE of 4.2978 was reached using the k-Nearest Neighbor(k-NN)algorithm,which was set up as instance-based k-Nearest neighbors(IBk)in Weka after being trained on 17 days of data.Regression performance for most models(excluding IBk)stabilizes at 14 days or more.Compared to the 7-day dataset,increasing to 21 days reduced the MAE by around 20%and improved correlation coefficients by around 2.1%,highlighting the value of moderate dataset expansion.These findings suggest that datasets spanning 17 to 21 days,with 80%used for training,can significantly enhance the predictive accuracy of solar power generation models.展开更多
The characteristics of summertime raindrop size distribution(DSD) and associated relations in the semi-arid region over the Inner Mongolian Plateau(IMP) were investigated,utilizing five-year continuous observations by...The characteristics of summertime raindrop size distribution(DSD) and associated relations in the semi-arid region over the Inner Mongolian Plateau(IMP) were investigated,utilizing five-year continuous observations by a PARSIVEL2disdrometer in East Ujimqin County(EUC),China.It is found that only 7.94% of the 15 664 one-min precipitation samples meet classification criteria as convective rain(CR),but its contribution to the total rainfall amount is 63.87%.Notably,40.72% of the rainfall comes from large-sized raindrops(D> 3 mm),despite the fact that large-sized raindrops account for only 1.73% of the CR total number concentration.Further results show that the mean value of mass-weighted mean diameters(Dm) is larger(2.43 mm) and generalized intercepts(lgN_(W)) is lower(3.19) in CR,aligning with a "continentallike" cluster,which is mainly influenced by the joint impact of in-cloud ice-based processes and the below-cloud environmental background.Also,the empirical relationships of shape-slope(μ-Λ),radar reflectivity-rain rate(Z-R),and rainfall kinetic energy(KE_(time)-Rand KE_(time)-Z) are localized.To quantitatively analyze the impact of DSD parameters on kinetic energy estimation,power-law KE_(time)-R and KE_(time)-Z relationships are derived based on the normalized gamma distribution.N_(W)takes precedence over μ in affecting variabilities of multiplicative coefficients,especially for KE_(time)-R relationship where the multiplicative coefficient is proportional to N_(W)^(-0.287).It should be noted that although the proportion of CR occurring throughout the summer is small,raindrops with lower N_(W) and larger Dmwill generate higher KE_(time),which will bring a higher potential risk of soil erosion in semi-arid regions over IMP.展开更多
The influence of graphene platelets(GPLs)on the WC grain size of WC-Co-GPLs cemented carbide prepared by low-pressure sintering was investigated.The role of GPLs in refining WC grains was explored by characterizing gr...The influence of graphene platelets(GPLs)on the WC grain size of WC-Co-GPLs cemented carbide prepared by low-pressure sintering was investigated.The role of GPLs in refining WC grains was explored by characterizing grain size and phase distribution.Results show that the addition of GPLs leads to significant grain refinement of WC and the more uniform distribution of WC grain size.When the content of GPLs is 0.10wt%,the average WC grain size in the cemented carbide is 0.39μm,which is 32%lower than that in WC-Co.However,the shape of WC grains is almost unaffected,while the mean free path of Co decreases.The grain refinement of WC is attributed to the homogeneous distribution of GPLs between WC/WC and WC/Co grain boundaries,which hinders the solution and precipitation process of WC in liquid phase Co,as well as the migration and growth of WC grains.Additionally,GPLs can serve as heat transfer plates in materials to improve cooling efficiency,thus inhibiting the growth of WC grain.展开更多
A constitutive model considering the size effect was established to investigate the behavior of CoCrNi medium entropy alloy ultrathin strip in different deformation stages during the uniaxial quasi-static tensile test...A constitutive model considering the size effect was established to investigate the behavior of CoCrNi medium entropy alloy ultrathin strip in different deformation stages during the uniaxial quasi-static tensile test.Results show that when the t/d value is lower than 10.62,the CoCrNi alloy ultrathin strip shows an obvious size-dependent property in the elastic deformation stage.With the decrease in t/d value,the volume fraction of the surface layer grains is increased,leading to the linear decrease in flow stress.In the plastic deformation stage,the material stiffness is correlated with the t/d value.Specifically,as the t/d value increases,the work-hardening capacity of the material is enhanced.When the t/d value increases to 10,the work-hardening capacity reaches a maximum state;when the t/d value is beyond 10,the work-hardening capacity weakens.展开更多
The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compressio...The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of aggregates.The mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically analyzed.The results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,respectively.However,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the aggregates.Theσ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite trend.Theε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse aggregates.With increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.展开更多
A gold catalyst of Au/pyrenyl‑graphdiyne(Pyr‑GDY)was prepared by anchoring small size of gold nanoparticles(Au NPs)on the surface of Pyr‑GDY for electrocatalytic nitrogen reduction reaction(eNRR),in which Au NPs with ...A gold catalyst of Au/pyrenyl‑graphdiyne(Pyr‑GDY)was prepared by anchoring small size of gold nanoparticles(Au NPs)on the surface of Pyr‑GDY for electrocatalytic nitrogen reduction reaction(eNRR),in which Au NPs with a size of approximately 3.69 nm was evenly distributed on spongy‑like porous Pyr‑GDY.The catalyst exhibited a good electrocatalytic activity for N_(2)reduction in a nitrogen‑saturated electrolyte,with an ammonia yield of 32.1μg·h^(-1)·mg_(cat)^(-1)at-0.3 V(vs RHE),3.5 times higher than that of Au/C(Au NPs anchored on carbon black).In addition,Au/Pyr‑GDY showed a Faraday efficiency(FE)of 26.9%for eNRR,and a good catalysis durability for over 22 h.展开更多
The extraordinary strength of metal/graphene composites is significantly determined by the characteristic size,distribution and morphology of graphene.However,the effect of the graphene size/distribution on the mechan...The extraordinary strength of metal/graphene composites is significantly determined by the characteristic size,distribution and morphology of graphene.However,the effect of the graphene size/distribution on the mechanical properties and related strengthening mechanisms has not been fully elucidated.Herein,under the same volume fraction and distribution conditions of graphene,molecular dynamics simulations were used to investigate the effect of graphene sheet size on the hardness and deformation behavior of Cu/graphene composites under complex stress field.Two models of pure single crystalline Cu and graphene fully covered Cu matrix composite were constructed for comparison.The results show that the strengthening effect changes with varying the graphene sheet size.Besides the graphene dislocation blocking effect and the load-bearing effect,the deformation mechanisms change from stacking fault tetrahedron,dislocation bypassing and dislocation cutting to dislocation nucleation in turn with decreasing the graphene sheet size.The hardness of Cu/graphene composite,with the graphene sheet not completely covering the metal matrix,can even be higher than that of the fully covered composite.The extra strengthening mechanisms of dislocation bypassing mechanism and the stacking fault tetrahedra pinning dislocation mechanism contribute to the increase in hardness.展开更多
Constructed Wetlands (CWs) are currently one of the most promising techniques for wastewater treatment, having demonstrated their effectiveness. However, the choice of substrate particle size is critical to the smooth...Constructed Wetlands (CWs) are currently one of the most promising techniques for wastewater treatment, having demonstrated their effectiveness. However, the choice of substrate particle size is critical to the smooth operation of the process, as hydrodynamic constraints require a coarse particle size, whereas wastewater treatment recommends a fine particle size. This study investigates the suitability of laterite and shale as substrates of different sizes (1 - 3, 3 - 5 and 5 - 8 mm) in CWs for domestic wastewater treatment. The study was carried out in an experimental pilot plant consisting of 12 parallelepiped beds (C × C = 0.4 × 0.4 m2;H = 0.6 m) filled from bottom to top with 0.1 m of gravel and 0.4 m of shale or laterite of different grain sizes with two replications. During the six months of operation, plant biomass and stem diameter of Pennisetum purpureum used as vegetation in the CWs were determined. Raw and treated water were also sampled and analyzed for pollutants, including chemical oxygen demand (COD), biochemical oxygen demand (BOD5), total Kjedahl nitrogen (TKN), total phosphorus (TP), and total suspended solids (TSS), using International Organization for Standardization (ISO) analytical methods. P. purpureum developed much better in the CW beds lined with shale;plant biomass ranged from 13.8 to 14.7 kg/m2 and from 11.2 to 12.5 kg/m2 in the beds lined with shale and laterite, respectively, as did stump diameter, which ranged from 15.5 to 16.1 cm and from 11.10 to 12.7 cm, respectively. However, the highest values for biomass and stump diameter for each material were obtained in the beds lined with 1 - 3 mm geomaterials. Pollutant removal efficiencies were highest in the CWs lined with laterite and shale of 1 - 3 mm grain size (76.9% - 83% COD, 78% - 84.7% BOD5, 55.5% - 72.2% TKN, 58.4% - 72.4% TP, 78.1% - 80.2% TSS), with the highest values recorded in the shale-lined beds. However, the 3 - 5 mm grain size of both materials provided quality filtrates (140 - 174 mg/L COD, 78.5 - 94.8 mg/L BOD5, 4.6 - 5.7 mg/L TP) in line with local wastewater discharge levels. This size of geomaterials appears to be suitable for optimization purposes, although further work with these materials, such as increasing the depth of the wetland, is required to improve the level of NTK and TSS discharge.展开更多
Seed size is an important agronomic trait determining crop yield.Identifying key genes involved in seed size regulation and elucidating their molecular mechanisms are of great significance for crop breeding.Recent stu...Seed size is an important agronomic trait determining crop yield.Identifying key genes involved in seed size regulation and elucidating their molecular mechanisms are of great significance for crop breeding.Recent studies in crops have uncovered numerous genes that control seed size and weight,many of which function by modulating phytohormone biosynthesis,metabolism,or signaling pathways.This review provides a comprehensive overview of the genetic and molecular mechanisms by which phytohormones regulate seed size and weight and their cross-talks in modulating seed size.We highlight the functional conservation and divergence of homologous genes that control seed size across species.A particular focus is placed on those genes that have promising potential for yield improvement.Finally,we discuss current challenges in phytohormone regulation of seed size and molecular design breeding strategies for translating this knowledge into crop improvement.展开更多
Kitaev quantum spin liquids have attracted significant attention in condensed matter physics over the past decade.To understand their emergent quantum phenomena,high-quality single crystals of substantial size are ess...Kitaev quantum spin liquids have attracted significant attention in condensed matter physics over the past decade.To understand their emergent quantum phenomena,high-quality single crystals of substantial size are essential.Here,we report the synthesis of single crystals of the Kitaev quantum spin liquid candidate RuBr_(3),achieving millimeter-sized crystals through a self-flux method under high pressure and high temperature conditions.The crystals exhibit well-defined cleavage planes with a lustrous appearance.Transport characterizations exhibit a narrow band-gap semiconducting behavior with 0.13 eV and 0.11 eV band-gap in ab plane and along𝑐axis,respectively.Magnetic measurement shows a transition to antiferromagnetic(AFM)state at approximately 29K both in ab plane and along the c axis.Notably,the N′eel temperature increases to 34K with an applied magnetic field of up to 7T in the ab plane,but without any change along𝑐axis.The large size and high quality of RuBr3 single crystals provide a valuable platform for investigating various interactions,particularly the Kitaev interaction,and for elucidating the intrinsic physical properties of Kitaev quantum spin liquids.展开更多
To the Editor:Thymic carcinoma is a highly aggressive subtype of thymomas,accounting for 1%of thymic malignancies.It predominantly(80%)manifests in the anterosuperior mediastinum[1].Nevertheless,the occurrence of extr...To the Editor:Thymic carcinoma is a highly aggressive subtype of thymomas,accounting for 1%of thymic malignancies.It predominantly(80%)manifests in the anterosuperior mediastinum[1].Nevertheless,the occurrence of extrathoracic metastases,particularly liver metastases,is uncommon.The clinical manifestation of thymic carcinoma accompanied by liver metastases is characterized by ambiguous and nonspecific symptoms.Consequently,it is challenging to ascertain.展开更多
This study investigates the size characteristics and related temporal variations of tropical cyclones(TCs)over the Western North Pacific(WNP)and those affecting East China(EC)using Joint Typhoon Warning Center(JTWC)da...This study investigates the size characteristics and related temporal variations of tropical cyclones(TCs)over the Western North Pacific(WNP)and those affecting East China(EC)using Joint Typhoon Warning Center(JTWC)data during 2001-20.The average size of EC TCs is found to be similar to that over the WNP.Furthermore,the annual maximum lifetime maximum size(LMS)of EC TCs shows a statistically significant increasing trend,implying a more severe impact on the EC region.Composite analyses of intensity and size variation over the entire lifetime of TCs,before and after re-curvature,and before and after rapid intensification(RI),show that there are significant differences between them in some key areas:(1)The intensity begins to rapidly decrease after the TC has reached its highest intensity,but the size remains quasi-constant;(2)When a TC recurves south of 15°N or north of 30°N,the variation trend for both intensity and size are broadly similar before and after curvature,but their variation trends are opposite when the recurvature occurs between 15°-30°N;(3)After RI,the intensity reaches its peak value within 24 h,whereas the size reaches its LMS after30-48 h.A significant correlation is also found between the rate of change in intensity and that of size during the development stage,with a correlation coefficient of 0.67 and 0.73 for TCs in the WNP and EC,respectively.However,no significant correlation exists during the weakening stage.展开更多
基金supported by the National Natural Science Foundation of China(No.52272382)the Fundamental Research Funds for the Central Universities,China。
文摘Path planning is crucial for autonomous flight of fixed-wing Unmanned Aerial Vehicles(UAVs).However,due to the high-speed flight and complex control of fixed-wing UAVs,ensuring the feasibility and safety of planned paths in complex environments is challenging.This paper proposes a feasible path planning algorithm named Closed-loop Radial Ray A^(*)(CL-RaA^(*)).The core components of the CL-RaA^(*)include an adaptive variable-step-size path search and a just-in-time expansion primitive.The former enables fast path search in complex environments,while the latter ensures the feasibility of the generated paths.By integrating these two components and conducting safety checks on the trajectories to be expanded,the CL-RaA^(*)can rapidly generate safe and feasible paths that satisfy the differential constraints that comprehensively consider the dynamics and control characteristics of six-degree-of-freedom fixed-wing UAVs.The final performance tests and simulation validations demonstrate that the CL-RaA^(*)can generate safe and feasible paths in various environments.Compared to feasible path planning algorithms that use the rapidlyexploring random trees,the CL-RaA^(*)not only ensures deterministic planning results in the same scenarios but also generates smoother feasible paths for fixed-wing UAVs more efficiently.In environments with dense grid obstacles,the feasible paths generated by the CL-RaA^(*)are more conducive to UAV tracking compared to those planned using Dubins curves.
基金National Natural Science Foundation of China(52065036,52365018)Natural Science Foundation of Gansu(23JRRA760)+1 种基金Hongliu Outstanding Youth Foundation of Lanzhou University of TechnologyChina Postdoctoral Science Foundation(2023M733583)。
文摘The scratching mechanism of polycrystallineγ-TiAl alloy was investigated at the atomic scale using the molecular dynamics method,with a focus on the influence of different grain sizes.The analysis encompassed tribological characteristics,scratch morphology,subsurface defect distribution,temperature variations,and stress states during the scratching process.The findings indicate that the scratch force,number of recovered atoms,and pile-up height exhibit abrupt changes when the critical size is 9.41 nm due to the influence of the inverse Hall-Petch effect.Variations in the number of grain boundaries and randomness of grain orientation result in different accumulation patterns on the scratch surface.Notably,single crystal materials and those with 3.73 nm in grain size display more regular surface morphology.Furthermore,smaller grain size leads to an increase in average coefficient of friction,removed atoms number,and wear rate.While it also causes higher temperatures with a larger range of distributions.Due to the barrier effect of grain boundaries,smaller grains exhibit reduced microscopic defects.Additionally,average von Mises stress and hydrostatic compressive stress at the indenter tip decrease as grain size decreases owing to grain boundary obstruction.
基金supported by the National Key Research and Development Plan of the Ministry of Science and Technology,China(Grant No.:2022YFE0125300)the National Natural Science Foundation of China(Grant No:81690262)+2 种基金the National Science and Technology Major Project,China(Grant No.:2017ZX09201004-021)the Open Project of National facility for Translational Medicine(Shanghai),China(Grant No.:TMSK-2021-104)Shanghai Jiao Tong University STAR Grant,China(Grant Nos.:YG2022ZD024 and YG2022QN111).
文摘Liposomes serve as critical carriers for drugs and vaccines,with their biological effects influenced by their size.The microfluidic method,renowned for its precise control,reproducibility,and scalability,has been widely employed for liposome preparation.Although some studies have explored factors affecting liposomal size in microfluidic processes,most focus on small-sized liposomes,predominantly through experimental data analysis.However,the production of larger liposomes,which are equally significant,remains underexplored.In this work,we thoroughly investigate multiple variables influencing liposome size during microfluidic preparation and develop a machine learning(ML)model capable of accurately predicting liposomal size.Experimental validation was conducted using a staggered herringbone micromixer(SHM)chip.Our findings reveal that most investigated variables significantly influence liposomal size,often interrelating in complex ways.We evaluated the predictive performance of several widely-used ML algorithms,including ensemble methods,through cross-validation(CV)for both lipo-some size and polydispersity index(PDI).A standalone dataset was experimentally validated to assess the accuracy of the ML predictions,with results indicating that ensemble algorithms provided the most reliable predictions.Specifically,gradient boosting was selected for size prediction,while random forest was employed for PDI prediction.We successfully produced uniform large(600 nm)and small(100 nm)liposomes using the optimised experimental conditions derived from the ML models.In conclusion,this study presents a robust methodology that enables precise control over liposome size distribution,of-fering valuable insights for medicinal research applications.
基金supported by the National Natural Science Foundation of China(Nos.52222110,52401354,and 52301353).
文摘As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.
文摘Understanding the fracture behavior of rocks subjected to temperature and accounting for the rock's texture is vital for safe and efficient design.Prior studies have often focused on isolated aspects of rock fracture behavior,neglecting the combined influence of grain size and temperature on fracture behavior.This study employs specimens based on the particle flow code-grain based model to scrutinize the influence of temperature and grain size discrepancies on the fracture characteristics of sandstone.In pursuit of this goal,we manufactured ninety-six semi-circular bend specimens with grain sizes spanning from 0.5 mm to 1.5 mm,predicated on the mineral composition of sandstone.Recognizing the significance of intra-granular and inter-granular fractures,the grains were considered deformable and susceptible to breakage.The numerical model was calibrated using the results of uniaxial compressive strength(UCS)and Brazilian tests.We implemented thermo-mechanical coupled analysis to simulate mode Ⅰ,mode Ⅱ,and mixed mode(Ⅰ-Ⅱ)fracture toughness tests and subsequently studied alterations in the fracture behavior of sandstone at temperatures from 25℃ to 700℃.Our findings revealed increased fracture toughness as the temperature escalated from 25℃ to 200℃.However,beyond the threshold of 200℃,we noted a decline in fracture toughness.More specifically,the drop in mode Ⅰ fracture toughness was more pronounced in specimens with finer grains than those with coarser grains.Contrarily,the trend was reversed for mode Ⅱ fracture toughness.In contrast,the reduction of mixed mode(Ⅰ-Ⅱ)fracture toughness seemed almost linear across all grain sizes.Furthermore,we identified a correlation between temperature and grain size and their collective impact on crack propagation patterns.Comparing our results with established theoretical benchmarks,we confirmed that both temperature and grain size variations influence the fracture envelopes of sandstone.
基金supported in part by financial support from the National Key R&D Program of China(No.2023YFB3407003)the National Natural Science Foundation of China(No.52375378).
文摘A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.
基金supported by the National Natural Science Foundation of China (Grant Nos.12202294 and 12022208)the Project funded by China Postdoctoral Science Foundation (Grant No.2022M712243)the Fundamental Research Funds for the Central Universities (Grant No.2023SCU12098).
文摘It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size(grain size,GS)or the external size(geometric size).The coupled effect of GS and geometric size on the functional properties has not been clearly understood yet.In this work,the super-elasticity,one-way,and stress-assisted two-way shape memory effects of the polycrystalline NiTi SMAs with different aspect ratios(length/width for the gauge section)and different GSs are investigated based on the phase field method.The coupled effect of the aspect ratio and GS on the functional properties is adequately revealed.The simulated results indicate that when the aspect ratio is lower than about 4:1,the stress biaxiality and stress heterogeneity in the gauge section of the sample become more and more obvious with decreasing the aspect ratio,which can significantly influence the microstructure evolution in the process involving external stress.Therefore,the corresponding functional property is strongly dependent on the aspect ratio.With decreasing the GS and the aspect ratio(to be lower than 4:1),both the aspect ratio and GS can affect the MT or martensite reorientation in each grain and the interaction among grains.Thus,due to the strong internal constraint(i.e.,the constraint of grain boundary)and the external constraint(i.e.,the constraint of geometric boundary),the capabilities of the functional properties of NiTi SMAs are gradually weakened and highly dependent on these two factors.
基金the National Natural Science Foundation of China(No.52205468)China Postdoctoral Science Foundation(No.2022M710061 and No.2023T160277)Natural Science Foundation of Jiangsu Province(No.BK20210755)。
文摘Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.
文摘Knowing the influence of the size of datasets for regression models can help in improving the accuracy of a solar power forecast and make the most out of renewable energy systems.This research explores the influence of dataset size on the accuracy and reliability of regression models for solar power prediction,contributing to better forecasting methods.The study analyzes data from two solar panels,aSiMicro03036 and aSiTandem72-46,over 7,14,17,21,28,and 38 days,with each dataset comprising five independent and one dependent parameter,and split 80–20 for training and testing.Results indicate that Random Forest consistently outperforms other models,achieving the highest correlation coefficient of 0.9822 and the lowest Mean Absolute Error(MAE)of 2.0544 on the aSiTandem72-46 panel with 21 days of data.For the aSiMicro03036 panel,the best MAE of 4.2978 was reached using the k-Nearest Neighbor(k-NN)algorithm,which was set up as instance-based k-Nearest neighbors(IBk)in Weka after being trained on 17 days of data.Regression performance for most models(excluding IBk)stabilizes at 14 days or more.Compared to the 7-day dataset,increasing to 21 days reduced the MAE by around 20%and improved correlation coefficients by around 2.1%,highlighting the value of moderate dataset expansion.These findings suggest that datasets spanning 17 to 21 days,with 80%used for training,can significantly enhance the predictive accuracy of solar power generation models.
基金supported by the National Natural Science Foundation of China(Grant Nos.42325503,42075063,42075066,and 42021004)the Hubei Provincial Natural Science Foundation and the Meteorological Innovation and Development Project of China(Grant No.2023AFD096)the Beijige Foundation of NJIAS(Grant No.BJG202304).
文摘The characteristics of summertime raindrop size distribution(DSD) and associated relations in the semi-arid region over the Inner Mongolian Plateau(IMP) were investigated,utilizing five-year continuous observations by a PARSIVEL2disdrometer in East Ujimqin County(EUC),China.It is found that only 7.94% of the 15 664 one-min precipitation samples meet classification criteria as convective rain(CR),but its contribution to the total rainfall amount is 63.87%.Notably,40.72% of the rainfall comes from large-sized raindrops(D> 3 mm),despite the fact that large-sized raindrops account for only 1.73% of the CR total number concentration.Further results show that the mean value of mass-weighted mean diameters(Dm) is larger(2.43 mm) and generalized intercepts(lgN_(W)) is lower(3.19) in CR,aligning with a "continentallike" cluster,which is mainly influenced by the joint impact of in-cloud ice-based processes and the below-cloud environmental background.Also,the empirical relationships of shape-slope(μ-Λ),radar reflectivity-rain rate(Z-R),and rainfall kinetic energy(KE_(time)-Rand KE_(time)-Z) are localized.To quantitatively analyze the impact of DSD parameters on kinetic energy estimation,power-law KE_(time)-R and KE_(time)-Z relationships are derived based on the normalized gamma distribution.N_(W)takes precedence over μ in affecting variabilities of multiplicative coefficients,especially for KE_(time)-R relationship where the multiplicative coefficient is proportional to N_(W)^(-0.287).It should be noted that although the proportion of CR occurring throughout the summer is small,raindrops with lower N_(W) and larger Dmwill generate higher KE_(time),which will bring a higher potential risk of soil erosion in semi-arid regions over IMP.
基金National Natural Science Foundation of China(51572224)Guangdong Young Creative Talents(2023KQNCX039)+2 种基金Guangdong Basic and Applied Basic Research Foundation(2023A1515110551)Innovative Team in Higher Educational Institutions of Guangdong Province(2020KCXTD039)2023 Lingnan Normal College Students Innovation and Entrepreneurship Training Program(1742)。
文摘The influence of graphene platelets(GPLs)on the WC grain size of WC-Co-GPLs cemented carbide prepared by low-pressure sintering was investigated.The role of GPLs in refining WC grains was explored by characterizing grain size and phase distribution.Results show that the addition of GPLs leads to significant grain refinement of WC and the more uniform distribution of WC grain size.When the content of GPLs is 0.10wt%,the average WC grain size in the cemented carbide is 0.39μm,which is 32%lower than that in WC-Co.However,the shape of WC grains is almost unaffected,while the mean free path of Co decreases.The grain refinement of WC is attributed to the homogeneous distribution of GPLs between WC/WC and WC/Co grain boundaries,which hinders the solution and precipitation process of WC in liquid phase Co,as well as the migration and growth of WC grains.Additionally,GPLs can serve as heat transfer plates in materials to improve cooling efficiency,thus inhibiting the growth of WC grain.
基金National Natural Science Foundation of China(12072220,12225207,12372364)National Key Research and Development Program(2018YFA0707300)+2 种基金Major Program of National Natural Science Foundation of China(U22A20188)Central Guidance on Local Science and Technology Development Fund of Shanxi Province(YDZJSX2021B002)Natural Science Foundation of Shanxi Province(202303021211038)。
文摘A constitutive model considering the size effect was established to investigate the behavior of CoCrNi medium entropy alloy ultrathin strip in different deformation stages during the uniaxial quasi-static tensile test.Results show that when the t/d value is lower than 10.62,the CoCrNi alloy ultrathin strip shows an obvious size-dependent property in the elastic deformation stage.With the decrease in t/d value,the volume fraction of the surface layer grains is increased,leading to the linear decrease in flow stress.In the plastic deformation stage,the material stiffness is correlated with the t/d value.Specifically,as the t/d value increases,the work-hardening capacity of the material is enhanced.When the t/d value increases to 10,the work-hardening capacity reaches a maximum state;when the t/d value is beyond 10,the work-hardening capacity weakens.
基金financially supported by the National Natural Science Foundation of China(Nos.52174092,51904290,and 52374147)the Natural Science Foundation of Jiangsu Province,China(No.BK20220157)+2 种基金the Fundamental Research Funds for the Central Universities,China(No.2022YCPY0202)the National Key Research and Development Program of China(No.2023YFC3804204)the Major Program of Xinjiang Uygur Autonomous Region S cience and Technology(No.2023A01002)。
文摘The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of aggregates.The mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically analyzed.The results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,respectively.However,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the aggregates.Theσ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite trend.Theε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse aggregates.With increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.
文摘A gold catalyst of Au/pyrenyl‑graphdiyne(Pyr‑GDY)was prepared by anchoring small size of gold nanoparticles(Au NPs)on the surface of Pyr‑GDY for electrocatalytic nitrogen reduction reaction(eNRR),in which Au NPs with a size of approximately 3.69 nm was evenly distributed on spongy‑like porous Pyr‑GDY.The catalyst exhibited a good electrocatalytic activity for N_(2)reduction in a nitrogen‑saturated electrolyte,with an ammonia yield of 32.1μg·h^(-1)·mg_(cat)^(-1)at-0.3 V(vs RHE),3.5 times higher than that of Au/C(Au NPs anchored on carbon black).In addition,Au/Pyr‑GDY showed a Faraday efficiency(FE)of 26.9%for eNRR,and a good catalysis durability for over 22 h.
基金Foundation of Northwest Institute for Nonferrous Metal Research(ZZXJ2203)Capital Projects of Financial Department of Shaanxi Province(YK22C-12)+3 种基金Innovation Capability Support Plan in Shaanxi Province(2023KJXX-083)Key Research and Development Projects of Shaanxi Province(2024GXYBXM-351,2024GX-YBXM-356)National Natural Science Foundation of China(62204207,12204383)Xi'an Postdoctoral Innovation Base Funding Program。
文摘The extraordinary strength of metal/graphene composites is significantly determined by the characteristic size,distribution and morphology of graphene.However,the effect of the graphene size/distribution on the mechanical properties and related strengthening mechanisms has not been fully elucidated.Herein,under the same volume fraction and distribution conditions of graphene,molecular dynamics simulations were used to investigate the effect of graphene sheet size on the hardness and deformation behavior of Cu/graphene composites under complex stress field.Two models of pure single crystalline Cu and graphene fully covered Cu matrix composite were constructed for comparison.The results show that the strengthening effect changes with varying the graphene sheet size.Besides the graphene dislocation blocking effect and the load-bearing effect,the deformation mechanisms change from stacking fault tetrahedron,dislocation bypassing and dislocation cutting to dislocation nucleation in turn with decreasing the graphene sheet size.The hardness of Cu/graphene composite,with the graphene sheet not completely covering the metal matrix,can even be higher than that of the fully covered composite.The extra strengthening mechanisms of dislocation bypassing mechanism and the stacking fault tetrahedra pinning dislocation mechanism contribute to the increase in hardness.
文摘Constructed Wetlands (CWs) are currently one of the most promising techniques for wastewater treatment, having demonstrated their effectiveness. However, the choice of substrate particle size is critical to the smooth operation of the process, as hydrodynamic constraints require a coarse particle size, whereas wastewater treatment recommends a fine particle size. This study investigates the suitability of laterite and shale as substrates of different sizes (1 - 3, 3 - 5 and 5 - 8 mm) in CWs for domestic wastewater treatment. The study was carried out in an experimental pilot plant consisting of 12 parallelepiped beds (C × C = 0.4 × 0.4 m2;H = 0.6 m) filled from bottom to top with 0.1 m of gravel and 0.4 m of shale or laterite of different grain sizes with two replications. During the six months of operation, plant biomass and stem diameter of Pennisetum purpureum used as vegetation in the CWs were determined. Raw and treated water were also sampled and analyzed for pollutants, including chemical oxygen demand (COD), biochemical oxygen demand (BOD5), total Kjedahl nitrogen (TKN), total phosphorus (TP), and total suspended solids (TSS), using International Organization for Standardization (ISO) analytical methods. P. purpureum developed much better in the CW beds lined with shale;plant biomass ranged from 13.8 to 14.7 kg/m2 and from 11.2 to 12.5 kg/m2 in the beds lined with shale and laterite, respectively, as did stump diameter, which ranged from 15.5 to 16.1 cm and from 11.10 to 12.7 cm, respectively. However, the highest values for biomass and stump diameter for each material were obtained in the beds lined with 1 - 3 mm geomaterials. Pollutant removal efficiencies were highest in the CWs lined with laterite and shale of 1 - 3 mm grain size (76.9% - 83% COD, 78% - 84.7% BOD5, 55.5% - 72.2% TKN, 58.4% - 72.4% TP, 78.1% - 80.2% TSS), with the highest values recorded in the shale-lined beds. However, the 3 - 5 mm grain size of both materials provided quality filtrates (140 - 174 mg/L COD, 78.5 - 94.8 mg/L BOD5, 4.6 - 5.7 mg/L TP) in line with local wastewater discharge levels. This size of geomaterials appears to be suitable for optimization purposes, although further work with these materials, such as increasing the depth of the wetland, is required to improve the level of NTK and TSS discharge.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences,China(XDB1090000 to S.J.)the National Key Research and Development Program of China,China(2021YFF1000202 and 2022YFF1002903 to Y.L.).
文摘Seed size is an important agronomic trait determining crop yield.Identifying key genes involved in seed size regulation and elucidating their molecular mechanisms are of great significance for crop breeding.Recent studies in crops have uncovered numerous genes that control seed size and weight,many of which function by modulating phytohormone biosynthesis,metabolism,or signaling pathways.This review provides a comprehensive overview of the genetic and molecular mechanisms by which phytohormones regulate seed size and weight and their cross-talks in modulating seed size.We highlight the functional conservation and divergence of homologous genes that control seed size across species.A particular focus is placed on those genes that have promising potential for yield improvement.Finally,we discuss current challenges in phytohormone regulation of seed size and molecular design breeding strategies for translating this knowledge into crop improvement.
基金supported by the National Key Research and Development Program of China(Grant Nos.2023YFA1406000 and 2022YFA1403800)the National Natural Science Foundation of China(Grant Nos.12474002,22171283,22203031,12434005,12204515,and 12074175)support of the Young Elite Scientists Sponsorship Program by CAST(Grant No.2022QNRC001)。
文摘Kitaev quantum spin liquids have attracted significant attention in condensed matter physics over the past decade.To understand their emergent quantum phenomena,high-quality single crystals of substantial size are essential.Here,we report the synthesis of single crystals of the Kitaev quantum spin liquid candidate RuBr_(3),achieving millimeter-sized crystals through a self-flux method under high pressure and high temperature conditions.The crystals exhibit well-defined cleavage planes with a lustrous appearance.Transport characterizations exhibit a narrow band-gap semiconducting behavior with 0.13 eV and 0.11 eV band-gap in ab plane and along𝑐axis,respectively.Magnetic measurement shows a transition to antiferromagnetic(AFM)state at approximately 29K both in ab plane and along the c axis.Notably,the N′eel temperature increases to 34K with an applied magnetic field of up to 7T in the ab plane,but without any change along𝑐axis.The large size and high quality of RuBr3 single crystals provide a valuable platform for investigating various interactions,particularly the Kitaev interaction,and for elucidating the intrinsic physical properties of Kitaev quantum spin liquids.
基金supported by a grant from the National Natural Science Foundation of China(No.82202974)。
文摘To the Editor:Thymic carcinoma is a highly aggressive subtype of thymomas,accounting for 1%of thymic malignancies.It predominantly(80%)manifests in the anterosuperior mediastinum[1].Nevertheless,the occurrence of extrathoracic metastases,particularly liver metastases,is uncommon.The clinical manifestation of thymic carcinoma accompanied by liver metastases is characterized by ambiguous and nonspecific symptoms.Consequently,it is challenging to ascertain.
基金supported by National Natural Science Foundation of China under(Grant No.U2142206)the Shanghai Natural Science Foundation(21ZR1477300)+1 种基金Shanghai Science and Technology Commission Project(23DZ1204701)National Natural Science Foundation of China(Grant No.42075056)。
文摘This study investigates the size characteristics and related temporal variations of tropical cyclones(TCs)over the Western North Pacific(WNP)and those affecting East China(EC)using Joint Typhoon Warning Center(JTWC)data during 2001-20.The average size of EC TCs is found to be similar to that over the WNP.Furthermore,the annual maximum lifetime maximum size(LMS)of EC TCs shows a statistically significant increasing trend,implying a more severe impact on the EC region.Composite analyses of intensity and size variation over the entire lifetime of TCs,before and after re-curvature,and before and after rapid intensification(RI),show that there are significant differences between them in some key areas:(1)The intensity begins to rapidly decrease after the TC has reached its highest intensity,but the size remains quasi-constant;(2)When a TC recurves south of 15°N or north of 30°N,the variation trend for both intensity and size are broadly similar before and after curvature,but their variation trends are opposite when the recurvature occurs between 15°-30°N;(3)After RI,the intensity reaches its peak value within 24 h,whereas the size reaches its LMS after30-48 h.A significant correlation is also found between the rate of change in intensity and that of size during the development stage,with a correlation coefficient of 0.67 and 0.73 for TCs in the WNP and EC,respectively.However,no significant correlation exists during the weakening stage.
