This paper deals with the simultaneous estimation of states and unknown inputs for a class of Lipschitz nonlinear systems using only the measured outputs. The system is assumed to have bounded uncertainties that appea...This paper deals with the simultaneous estimation of states and unknown inputs for a class of Lipschitz nonlinear systems using only the measured outputs. The system is assumed to have bounded uncertainties that appear on both the state and output matrices. The observer design problem is formulated as a set of linear constraints which can be easily solved using linear matrix inequalities (LMI) technique. An application based on manipulator arm actuated by a direct current (DC) motor is presented to evaluate the performance of the proposed observer. The observer is applied to estimate both state and faults.展开更多
In this paper, a full-order observer which can be fully decoupled from the unknown inputs as the conventional full-order observer does is designed by using auxiliary outputs, but the requirement of the matching condit...In this paper, a full-order observer which can be fully decoupled from the unknown inputs as the conventional full-order observer does is designed by using auxiliary outputs, but the requirement of the matching condition is removed. The procedure of calculating the parameter matrices of the full-order observer is also presented. Compared with the existing auxiliary outputs based sliding-mode observers, the designed observer has a simpler design procedure, which is systematic and does not involve solving linear matrix inequalities. The simulation results show that the proposed method is effective.展开更多
Cyber-physical systems(CPSs)take on the characteristics of both multiple rates of information collection and processing and the dependency on information exchanges.The purpose of this paper is to develop a joint recur...Cyber-physical systems(CPSs)take on the characteristics of both multiple rates of information collection and processing and the dependency on information exchanges.The purpose of this paper is to develop a joint recursive filtering scheme that estimates both unknown inputs and system states for multi-rate CPSs with unknown inputs.In cyberspace,the information transmission between the local joint filter and the sensors is governed by an adaptive event-triggered strategy.Furthermore,the desired parameters of joint filters are determined by a set of algebraic matrix equations in a recursive way,and a sufficient condition verifying the boundedness of filtering error covariance is found by resorting to some algebraic operation.A state fusion estimation scheme that uses local state estimation is proposed based on the covariance intersection(CI)based fusion conception.Lastly,an illustrative example demonstrates the effectiveness of the proposed adaptive event-triggered recursive filtering algorithm.展开更多
Stochastic system state estimation subject to the unknown interference input widely exists in many fields,such as the control,communication,signal processing,and fault diagnosis.However,the research results are mostly...Stochastic system state estimation subject to the unknown interference input widely exists in many fields,such as the control,communication,signal processing,and fault diagnosis.However,the research results are mostly limited to the stochastic system in which only the dynamic state model or the measurement model concerns the individual unknown interference input,and the state model and the measurement model are both with the same unknown interference input.State estimate of the stochastic systems where the state model and the measurement model contain dual Unknown Interference inputs(dual-UI)with different physical meanings and mathematical definitions is concerned here.Firstly,the decoupling condition with the Unknown Interference input in the State model(S-UI)is shown,which introduces the decoupled system with the adjacent Measurement concerned Unknown Interference inputs(M-UI)appearing in the state model and the measurement model.Then,through defining the Differential term of the adjacent M-UI(M-UID),the equivalent system with only M-UID in the state model is obtained.Finally,considering the design freedom of the equivalent system,the decoupling filter in the minimum mean square error sense and the adaptive minimum upper filter with different applicable conditions are represented to obtain the optimal and sub-optimal state estimate,respectively.Two simulation cases verify the effectiveness and superiority compared with the traditional methods.展开更多
Dynamic state estimation(DSE)accurately tracks the dynamics of power systems and demonstrates the evolution of the system state in real time.This paper proposes a DSE approach for a doubly-fed induction generator(DFIG...Dynamic state estimation(DSE)accurately tracks the dynamics of power systems and demonstrates the evolution of the system state in real time.This paper proposes a DSE approach for a doubly-fed induction generator(DFIG)with unknown inputs based on adaptive interpolation and cubature Kalman filter(AICKF-UI).DFIGs adopt different control strategies in normal and fault conditions;thus,the existing DSE approaches based on the conventional control model of DFIG are not applicable in all cases.Consequently,the DSE model of DFIGs is reformulated to consider the converter controller outputs as unknown inputs,which are estimated together with the DFIG dynamic states by an exponential smoothing model and augmented-state cubature Kalman filter.Furthermore,as the reporting rate of existing synchro-phasor data is not sufficiently high to capture the fast dynamics of DFIGs,a large estimation error may occur or the DSE approach may diverge.To this end,in this paper,a local-truncation-error-guided adaptive interpolation approach is developed.Extensive simulations conducted on a wind farm and the modified IEEE 39-bus test system show that the proposed AICKF-UI can(1)effectively address the divergence issues of existing cubature Kalman filters while being computationally more efficient;(2)accurately track the dynamic states and unknown inputs of the DFIG;and(3)deal with various types of system operating conditions such as time-varying wind and different system faults.展开更多
In recent years, cyber attacks have posed great challenges to the development of cyber-physical systems. It is of great significance to study secure state estimation methods to ensure the safe and stable operation of ...In recent years, cyber attacks have posed great challenges to the development of cyber-physical systems. It is of great significance to study secure state estimation methods to ensure the safe and stable operation of the system. This paper proposes a secure state estimation for multi-input and multi-output continuous-time linear cyber-physical systems with sparse actuator and sensor attacks. First, for sparse sensor attacks, we propose an adaptive switching mechanism to mitigate the impact of sparse sensor attacks by filtering out their attack modes. Second, an unknown input sliding mode observer is designed to not only observe the system states, sensor attack signals, and measurement noise present in the system but also counteract the effects of sparse actuator attacks through an unknown input matrix. Finally, for the design of an unknown input sliding mode state observer, the feasibility of the observing system is demonstrated by means of Lyapunov functions. Additionally, simulation experiments are conducted to show the effectiveness of this method.展开更多
Chemical processes are usually nonlinear singular systems.In this study,a soft sensor using nonlinear singular state observer is established for unknown inputs and uncertain model parameters in chemical processes,whic...Chemical processes are usually nonlinear singular systems.In this study,a soft sensor using nonlinear singular state observer is established for unknown inputs and uncertain model parameters in chemical processes,which are augmented as state variables.Based on the observability of the singular system,this paper presents a simplified observability criterion under certain conditions for unknown inputs and uncertain model parameters.When the observability is satisfied,the unknown inputs and the uncertain model parameters are estimated online by the soft sensor using augmented nonlinear singular state observer.The riser reactor of fluid catalytic cracking unit is used as an example for analysis and simulation.With the catalyst circulation rate as the only unknown input without model error,one temperature sensor at the riser reactor outlet will ensure the correct estimation for the catalyst circulation rate.However,when uncertain model parameters also exist,additional temperature sensors must be used to ensure correct estimation for unknown inputs and uncertain model parameters of chemical processes.展开更多
This paper investigates the problem of state estimation for discrete-time stochastic linear systems, where additional knowledge on the unknown inputs is available at an aggregate level and the knowledge on the missing...This paper investigates the problem of state estimation for discrete-time stochastic linear systems, where additional knowledge on the unknown inputs is available at an aggregate level and the knowledge on the missing measurements can be described by a known stochastic distribution. Firstly, the available knowledge on the unknown inputs and the state equation is used to form the prior distribution of the state vector at each time step. Secondly, to obtain an analytically tractable likelihood function, the effect of missing measurements is broken down into a systematic part and a random part, and the latter is modeled as part of the observation noise. Then, a recursive filter is obtained based on Bayesian inference. Finally, a numerical example is provided to evaluate the performance of the proposed methods.展开更多
Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate...Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate sensor readings.These faults may result in system instability or compromise safety.In this paper,we propose a fault compensation control system to mitigate the effects of sensor faults and ensure system safety.Specifically,we utilize the pressure sensor within the system to implement the control process and evaluate performance based on the piston position.First,we develop a mathematical model to identify optimal parameters for the fault estimation model based on the Lyapunov stability principle.Next,we design an unknown input observer that estimates the state vector and detects pressure sensor faults using a linear matrix inequality optimization algorithm.The estimated pressure faults are incorporated into the fault compensation control system to counteract their effects via a fault residual coefficient.The discrepancy between the feedback state and the estimated state determines this coefficient.We assess the piston position’s performance through pressure control to evaluate the proposed model’s effectiveness.Finally,the system simulation results are analyzed to validate the efficiency of the proposed model.When a pressure sensor fault occurs,the proposed approach effectively minimizes position control errors,enhancing overall system stability.When a pressure sensor fault occurs,the proposed model compensates for the fault to mitigate the impact of pressure problem,thereby enhancing the position control quality of the EHA system.The fault compensation method ensures over 90%system performance,with its effectiveness becoming more evident under pressure sensor faults.展开更多
Hydraulic piston pumps are commonly used in aircraft. In order to improve the viability of aircraft and energy efficiency, intelligent variable pressure pump systems have been used in aircraft hydraulic systems more a...Hydraulic piston pumps are commonly used in aircraft. In order to improve the viability of aircraft and energy efficiency, intelligent variable pressure pump systems have been used in aircraft hydraulic systems more and more widely. Efficient fault diagnosis plays an important role in improving the reliability and performance of hydraulic systems. In this paper, a fault diagnosis method of an intelligent hydraulic pump system（IHPS） based on a nonlinear unknown input observer（NUIO） is proposed. Different from factors of a full-order Luenberger-type unknown input observer, nonlinear factors of the IHPS are considered in the NUIO. Firstly, a new type of intelligent pump is presented, the mathematical model of which is established to describe the IHPS. Taking into account the real-time requirements of the IHPS and the special structure of the pump, the mechanism of the intelligent pump and failure modes are analyzed and two typical failure modes are obtained. Furthermore, a NUIO of the IHPS is performed based on the output pressure and swashplate angle signals. With the residual error signals produced by the NUIO, online intelligent pump failure occurring in real-time can be detected. Lastly, through analysis and simulation, it is confirmed that this diagnostic method could accurately diagnose and isolate those typical failure modes of the nonlinear IHPS. The method proposed in this paper is of great significance in improving the reliability of the IHPS.展开更多
Unknown input observer is one of the most famous strategies for robust fault diagnosis of linear systems, but studies on nonlinear cases are not sufficient. On the other hand, the extended Kalman filter （EKF） is wel...Unknown input observer is one of the most famous strategies for robust fault diagnosis of linear systems, but studies on nonlinear cases are not sufficient. On the other hand, the extended Kalman filter （EKF） is wellknown in nonlinear estimation, and its convergence as an observer of nonlinear deterministic system has been derived recently. By combining the EKF and the unknown input Kalman filter, we propose a robust nonlinear estimator called unknown input EKF （UIEKF） and prove its convergence as a nonlinear robust observer under some mild conditions using linear matrix inequality （LMI）. Simulation of a three-tank system “DTS200”, a benchmark in process control, demonstrates the robustness and effectiveness of the UIEKF as an observer for nonlinear systems with uncertainty, and the fault diagnosis based on the UIEKF is found successful.展开更多
A robust delay compensator has been developed for a class of uncertain nonlinear systems with an unknown constant input delay.The control law consists of feedback terms based on the integral of past control values and...A robust delay compensator has been developed for a class of uncertain nonlinear systems with an unknown constant input delay.The control law consists of feedback terms based on the integral of past control values and a novel filtered tracking error,capable of compensating for input delays.Suitable Lyapunov-Krasovskii functionals are used to prove global uniformly ultimately bounded(GUUB)tracking,provided certain sufficient gain conditions,dependent on the bound of the delay,are satisfied.Simulation results illustrate the performance and robustness of the controller for different values of input delay.展开更多
A unknown input observer （UIO） design for a class of linear time-delay systems when the observer error can＇t completely decouple from unknown input is dealt with. A sufficient condition to its existence is presente...A unknown input observer （UIO） design for a class of linear time-delay systems when the observer error can＇t completely decouple from unknown input is dealt with. A sufficient condition to its existence is presented based on Lyapunov stability method. Design problem of the proposed observer is formulated in term of linear matrix inequalities. Two design problems of the observer with internal delay and without internal delay are formulated. Based on H∞ control theory in time-delay systems, the proposed observer is designed in term of linear matrix inequalities （LMI）. A design algorithm is proposed. The effective of the proposed approach is illustrated by a numerical example.展开更多
The present study addresses the problem of fault estimation for a specific class of nonlinear time-varying complex networks,utilizing an unknown-input-observer approach within the framework of dynamic event-triggered ...The present study addresses the problem of fault estimation for a specific class of nonlinear time-varying complex networks,utilizing an unknown-input-observer approach within the framework of dynamic event-triggered mechanism(DETM).In order to optimize communication resource utilization,the DETM is employed to determine whether the current measurement data should be transmitted to the estimator or not.To guarantee a satisfactory estimation performance for the fault signal,an unknown-input-observer-based estimator is constructed to decouple the estimation error dynamics from the influence of fault signals.The aim of this paper is to find the suitable estimator parameters under the effects of DETM such that both the state estimates and fault estimates are confined within two sets of closed ellipsoid domains.The techniques of recursive matrix inequality are applied to derive sufficient conditions for the existence of the desired estimator,ensuring that the specified performance requirements are met under certain conditions.Then,the estimator gains are derived by minimizing the ellipsoid domain in the sense of trace and a recursive estimator parameter design algorithm is then provided.Finally,a numerical example is conducted to demonstrate the effectiveness of the designed estimator.展开更多
Recently, the conditions of observers that can estimate directly Kx（t） for an arbitrarily given K, and that are free of the effect of time delayed states of the system, are formulated. This paper points out that, be...Recently, the conditions of observers that can estimate directly Kx（t） for an arbitrarily given K, and that are free of the effect of time delayed states of the system, are formulated. This paper points out that, because of the equivalence in formulation, the existing conditions for unknown input observers can be used to establish directly a new set of sufficient conditions for that recent observer. This new set of sufficient conditions is much simpler, and therefore much more useful and significant, than the sufficient conditions derived in that recent paper. This new set of sufficient conditions also reveals some basic mistakes of that recent paper. In addition, this paper reveals the severe restrictiveness of this new set of conditions and proposes a fundamentally new observer design formulation that can relax that set of conditions significantly.展开更多
A novel robust fault diagnosis scheme, which possesses fault estimate capability as well as fault diagnosis property, is proposed. The scheme is developed based on a suitable combination of the adaptive multiple model...A novel robust fault diagnosis scheme, which possesses fault estimate capability as well as fault diagnosis property, is proposed. The scheme is developed based on a suitable combination of the adaptive multiple model （AMM） and unknown input observer （UIO）. The main idea of the proposed scheme stems from the fact that the actuator Lock-in-Place fault is unknown （when and where the actuator gets locked are unknown）, and multiple models are used to describe different fault scenarios, then a bank of unknown input observers are designed to implement the disturbance de-coupling. According to Lyapunov theory, proof of the robustness of the newly developed scheme in the presence of faults and disturbances is derived. Numerical simulation results on an aircraft example show satisfactory performance of the proposed algorithm.展开更多
By building mathematical model for HAGC （hydraulic automation gauge control） system of strip rolling mill, treating faults as unknown inputs induced by model uncertainty, and analyzing fault direction, an unknown in...By building mathematical model for HAGC （hydraulic automation gauge control） system of strip rolling mill, treating faults as unknown inputs induced by model uncertainty, and analyzing fault direction, an unknown input fault diagnosis observer group was designed. Fault detection and isolation were realized through making ob- server residuals robust to specific faults but sensitive to other faults. Sufficient existence conditions and design of the observers were given in detail. Diagnosis observer parameters for servo-valve, cylinder, roller and body rolling mill were obtained resoectively. The effectiveness of this diagnosis method was oroved bv actual data simulations.展开更多
This paper investigates the distributed fault-tolerant consensus tracking problem of nonlinear multi-agent systems with general incipient and abrupt time-varying actuator faults under cyber-attacks.First,a decentraliz...This paper investigates the distributed fault-tolerant consensus tracking problem of nonlinear multi-agent systems with general incipient and abrupt time-varying actuator faults under cyber-attacks.First,a decentralized unknown input observer is established to estimate relative states and actuator faults.Second,the estimated and output neighboring information is combined with distributed fault-tolerant consensus tracking controllers.Criteria of reaching leader-following exponential consensus tracking of multi-agent systems under both connectivity-maintained and connectivity-mixed attacks are derived with average dwelling time,attack frequency,and attack activation rate technique,respectively.Simulation example verifies the effectiveness of the fault-tolerant consensus tracking algorithm.展开更多
Component failures can cause multi-agent system(MAS)performance degradation and even disasters,which provokes the demand of the fault diagnosis method.A distributed sliding mode observer-based fault diagnosis method f...Component failures can cause multi-agent system(MAS)performance degradation and even disasters,which provokes the demand of the fault diagnosis method.A distributed sliding mode observer-based fault diagnosis method for MAS is developed in presence of actuator and sensor faults.Firstly,the actuator and sensor faults are extended to the system state,and the system is transformed into a descriptor system form.Then,a sliding mode-based distributed unknown input observer is proposed to estimate the extended state.Furthermore,adaptive laws are introduced to adjust the observer parameters.Finally,the effectiveness of the proposed method is demonstrated with numerical simulations.展开更多
This paper presents a scheme of fault diagnosis for flexible satellites during orbit maneuver. The main contribution of the paper is related to the design of the nonlinear input observer which can avoid false alarm ar...This paper presents a scheme of fault diagnosis for flexible satellites during orbit maneuver. The main contribution of the paper is related to the design of the nonlinear input observer which can avoid false alarm arising from the disturbance from orbit control force. The effects of orbit control force on the fault diagnosis system for satellite attitude control systems, including the disturbing torque caused by the misalignments and the model uncertainty caused by the fuel consumed, are discussed, where standard Lu- enberger observer cannot work well. Then the nonlinear unknown input observer is proposed to decouple faults from disturbance, Besides, a linear matrix inequality approach is adopted to reduce the effect of nonlinear part and model uncertainties on the observer. The numerical and semi-physical simulation demonstrates the effectiveness of the proposed observer for the fault diagnosis system of the satellite during orbit maneuver.展开更多
文摘This paper deals with the simultaneous estimation of states and unknown inputs for a class of Lipschitz nonlinear systems using only the measured outputs. The system is assumed to have bounded uncertainties that appear on both the state and output matrices. The observer design problem is formulated as a set of linear constraints which can be easily solved using linear matrix inequalities (LMI) technique. An application based on manipulator arm actuated by a direct current (DC) motor is presented to evaluate the performance of the proposed observer. The observer is applied to estimate both state and faults.
基金Supported by the National Natural Science Foundation of China(No.61203299)
文摘In this paper, a full-order observer which can be fully decoupled from the unknown inputs as the conventional full-order observer does is designed by using auxiliary outputs, but the requirement of the matching condition is removed. The procedure of calculating the parameter matrices of the full-order observer is also presented. Compared with the existing auxiliary outputs based sliding-mode observers, the designed observer has a simpler design procedure, which is systematic and does not involve solving linear matrix inequalities. The simulation results show that the proposed method is effective.
基金Project supported by the National Natural Science Foundation of China(Nos.62203306 and 61933007)the Shanghai Pujiang Program,China(No.22PJ1412600)the China Postdoctoral Science Foundation(No.2021M702195)。
文摘Cyber-physical systems(CPSs)take on the characteristics of both multiple rates of information collection and processing and the dependency on information exchanges.The purpose of this paper is to develop a joint recursive filtering scheme that estimates both unknown inputs and system states for multi-rate CPSs with unknown inputs.In cyberspace,the information transmission between the local joint filter and the sensors is governed by an adaptive event-triggered strategy.Furthermore,the desired parameters of joint filters are determined by a set of algebraic matrix equations in a recursive way,and a sufficient condition verifying the boundedness of filtering error covariance is found by resorting to some algebraic operation.A state fusion estimation scheme that uses local state estimation is proposed based on the covariance intersection(CI)based fusion conception.Lastly,an illustrative example demonstrates the effectiveness of the proposed adaptive event-triggered recursive filtering algorithm.
基金supported by the National Natural Science Foundation of China(Nos.61603040 and 61433003)Yunnan Applied Basic Research Project of China(No.201701CF00037)+1 种基金Guangdong Province Science and Technology Innovation Strategy Special Fund Project,China(No.skjtdzxrwqd2018001)Yunnan Provincial Science and Technology Department Key Research Program(Engineering),China(No.2018BA070)。
文摘Stochastic system state estimation subject to the unknown interference input widely exists in many fields,such as the control,communication,signal processing,and fault diagnosis.However,the research results are mostly limited to the stochastic system in which only the dynamic state model or the measurement model concerns the individual unknown interference input,and the state model and the measurement model are both with the same unknown interference input.State estimate of the stochastic systems where the state model and the measurement model contain dual Unknown Interference inputs(dual-UI)with different physical meanings and mathematical definitions is concerned here.Firstly,the decoupling condition with the Unknown Interference input in the State model(S-UI)is shown,which introduces the decoupled system with the adjacent Measurement concerned Unknown Interference inputs(M-UI)appearing in the state model and the measurement model.Then,through defining the Differential term of the adjacent M-UI(M-UID),the equivalent system with only M-UID in the state model is obtained.Finally,considering the design freedom of the equivalent system,the decoupling filter in the minimum mean square error sense and the adaptive minimum upper filter with different applicable conditions are represented to obtain the optimal and sub-optimal state estimate,respectively.Two simulation cases verify the effectiveness and superiority compared with the traditional methods.
基金supported by the National Natural Science Foundation of China(No.51725702)。
文摘Dynamic state estimation(DSE)accurately tracks the dynamics of power systems and demonstrates the evolution of the system state in real time.This paper proposes a DSE approach for a doubly-fed induction generator(DFIG)with unknown inputs based on adaptive interpolation and cubature Kalman filter(AICKF-UI).DFIGs adopt different control strategies in normal and fault conditions;thus,the existing DSE approaches based on the conventional control model of DFIG are not applicable in all cases.Consequently,the DSE model of DFIGs is reformulated to consider the converter controller outputs as unknown inputs,which are estimated together with the DFIG dynamic states by an exponential smoothing model and augmented-state cubature Kalman filter.Furthermore,as the reporting rate of existing synchro-phasor data is not sufficiently high to capture the fast dynamics of DFIGs,a large estimation error may occur or the DSE approach may diverge.To this end,in this paper,a local-truncation-error-guided adaptive interpolation approach is developed.Extensive simulations conducted on a wind farm and the modified IEEE 39-bus test system show that the proposed AICKF-UI can(1)effectively address the divergence issues of existing cubature Kalman filters while being computationally more efficient;(2)accurately track the dynamic states and unknown inputs of the DFIG;and(3)deal with various types of system operating conditions such as time-varying wind and different system faults.
基金supported by the National Science Foundation of China(Nos.62271293,61903238)the Natural Science Foundation of Shandong Province,China(No.ZR2021MF035)the Social Science Planning Project of Shandong Province,China(No.22CYYJ13).
文摘In recent years, cyber attacks have posed great challenges to the development of cyber-physical systems. It is of great significance to study secure state estimation methods to ensure the safe and stable operation of the system. This paper proposes a secure state estimation for multi-input and multi-output continuous-time linear cyber-physical systems with sparse actuator and sensor attacks. First, for sparse sensor attacks, we propose an adaptive switching mechanism to mitigate the impact of sparse sensor attacks by filtering out their attack modes. Second, an unknown input sliding mode observer is designed to not only observe the system states, sensor attack signals, and measurement noise present in the system but also counteract the effects of sparse actuator attacks through an unknown input matrix. Finally, for the design of an unknown input sliding mode state observer, the feasibility of the observing system is demonstrated by means of Lyapunov functions. Additionally, simulation experiments are conducted to show the effectiveness of this method.
基金Supported by the National Natural Science Foundation of China （21006127）, the National Basic Research Program of China （2012CB720500） and the Science Foundation of China University of Petroleum, Beijing （KYJJ2012-05-28）.
文摘Chemical processes are usually nonlinear singular systems.In this study,a soft sensor using nonlinear singular state observer is established for unknown inputs and uncertain model parameters in chemical processes,which are augmented as state variables.Based on the observability of the singular system,this paper presents a simplified observability criterion under certain conditions for unknown inputs and uncertain model parameters.When the observability is satisfied,the unknown inputs and the uncertain model parameters are estimated online by the soft sensor using augmented nonlinear singular state observer.The riser reactor of fluid catalytic cracking unit is used as an example for analysis and simulation.With the catalyst circulation rate as the only unknown input without model error,one temperature sensor at the riser reactor outlet will ensure the correct estimation for the catalyst circulation rate.However,when uncertain model parameters also exist,additional temperature sensors must be used to ensure correct estimation for unknown inputs and uncertain model parameters of chemical processes.
基金jointly funded by UK Engineering and Physical Sciences Research Council(EPSRC)and BAE System(EP/H501401/1)
文摘This paper investigates the problem of state estimation for discrete-time stochastic linear systems, where additional knowledge on the unknown inputs is available at an aggregate level and the knowledge on the missing measurements can be described by a known stochastic distribution. Firstly, the available knowledge on the unknown inputs and the state equation is used to form the prior distribution of the state vector at each time step. Secondly, to obtain an analytically tractable likelihood function, the effect of missing measurements is broken down into a systematic part and a random part, and the latter is modeled as part of the observation noise. Then, a recursive filter is obtained based on Bayesian inference. Finally, a numerical example is provided to evaluate the performance of the proposed methods.
基金supported by Nguyen Tat Thanh University,Ho Chi Minh City,Vietnam,provided with the facilities required to carry out this work.
文摘Hydraulic-electric systems are widely utilized in various applications.However,over time,these systems may encounter random faults such as loose cables,ambient environmental noise,or sensor aging,leading to inaccurate sensor readings.These faults may result in system instability or compromise safety.In this paper,we propose a fault compensation control system to mitigate the effects of sensor faults and ensure system safety.Specifically,we utilize the pressure sensor within the system to implement the control process and evaluate performance based on the piston position.First,we develop a mathematical model to identify optimal parameters for the fault estimation model based on the Lyapunov stability principle.Next,we design an unknown input observer that estimates the state vector and detects pressure sensor faults using a linear matrix inequality optimization algorithm.The estimated pressure faults are incorporated into the fault compensation control system to counteract their effects via a fault residual coefficient.The discrepancy between the feedback state and the estimated state determines this coefficient.We assess the piston position’s performance through pressure control to evaluate the proposed model’s effectiveness.Finally,the system simulation results are analyzed to validate the efficiency of the proposed model.When a pressure sensor fault occurs,the proposed approach effectively minimizes position control errors,enhancing overall system stability.When a pressure sensor fault occurs,the proposed model compensates for the fault to mitigate the impact of pressure problem,thereby enhancing the position control quality of the EHA system.The fault compensation method ensures over 90%system performance,with its effectiveness becoming more evident under pressure sensor faults.
基金co-supported by the National Natural Science Foundation of China (Nos. 51620105010, 51575019 and 51675019)National Basic Research Program of China (No. 2014CB046400)111 Program of China
文摘Hydraulic piston pumps are commonly used in aircraft. In order to improve the viability of aircraft and energy efficiency, intelligent variable pressure pump systems have been used in aircraft hydraulic systems more and more widely. Efficient fault diagnosis plays an important role in improving the reliability and performance of hydraulic systems. In this paper, a fault diagnosis method of an intelligent hydraulic pump system（IHPS） based on a nonlinear unknown input observer（NUIO） is proposed. Different from factors of a full-order Luenberger-type unknown input observer, nonlinear factors of the IHPS are considered in the NUIO. Firstly, a new type of intelligent pump is presented, the mathematical model of which is established to describe the IHPS. Taking into account the real-time requirements of the IHPS and the special structure of the pump, the mechanism of the intelligent pump and failure modes are analyzed and two typical failure modes are obtained. Furthermore, a NUIO of the IHPS is performed based on the output pressure and swashplate angle signals. With the residual error signals produced by the NUIO, online intelligent pump failure occurring in real-time can be detected. Lastly, through analysis and simulation, it is confirmed that this diagnostic method could accurately diagnose and isolate those typical failure modes of the nonlinear IHPS. The method proposed in this paper is of great significance in improving the reliability of the IHPS.
基金Supported by the National Natural Science Foundation of China (No. 60234010, 60574084)the Field Bus Technology & Automation Key Lab of Beijing at North China and the National 973 Program of China (No. 2002CB312200).
文摘Unknown input observer is one of the most famous strategies for robust fault diagnosis of linear systems, but studies on nonlinear cases are not sufficient. On the other hand, the extended Kalman filter （EKF） is wellknown in nonlinear estimation, and its convergence as an observer of nonlinear deterministic system has been derived recently. By combining the EKF and the unknown input Kalman filter, we propose a robust nonlinear estimator called unknown input EKF （UIEKF） and prove its convergence as a nonlinear robust observer under some mild conditions using linear matrix inequality （LMI）. Simulation of a three-tank system “DTS200”, a benchmark in process control, demonstrates the robustness and effectiveness of the UIEKF as an observer for nonlinear systems with uncertainty, and the fault diagnosis based on the UIEKF is found successful.
文摘A robust delay compensator has been developed for a class of uncertain nonlinear systems with an unknown constant input delay.The control law consists of feedback terms based on the integral of past control values and a novel filtered tracking error,capable of compensating for input delays.Suitable Lyapunov-Krasovskii functionals are used to prove global uniformly ultimately bounded(GUUB)tracking,provided certain sufficient gain conditions,dependent on the bound of the delay,are satisfied.Simulation results illustrate the performance and robustness of the controller for different values of input delay.
基金This project was supported by the National Natural Science Foundation of China(60374024)
文摘A unknown input observer （UIO） design for a class of linear time-delay systems when the observer error can＇t completely decouple from unknown input is dealt with. A sufficient condition to its existence is presented based on Lyapunov stability method. Design problem of the proposed observer is formulated in term of linear matrix inequalities. Two design problems of the observer with internal delay and without internal delay are formulated. Based on H∞ control theory in time-delay systems, the proposed observer is designed in term of linear matrix inequalities （LMI）. A design algorithm is proposed. The effective of the proposed approach is illustrated by a numerical example.
基金supported in part by the National Natural Science Foundation of China (62233012,62273087)the Research Fund for the Taishan Scholar Project of Shandong Province of Chinathe Shanghai Pujiang Program of China (22PJ1400400)。
文摘The present study addresses the problem of fault estimation for a specific class of nonlinear time-varying complex networks,utilizing an unknown-input-observer approach within the framework of dynamic event-triggered mechanism(DETM).In order to optimize communication resource utilization,the DETM is employed to determine whether the current measurement data should be transmitted to the estimator or not.To guarantee a satisfactory estimation performance for the fault signal,an unknown-input-observer-based estimator is constructed to decouple the estimation error dynamics from the influence of fault signals.The aim of this paper is to find the suitable estimator parameters under the effects of DETM such that both the state estimates and fault estimates are confined within two sets of closed ellipsoid domains.The techniques of recursive matrix inequality are applied to derive sufficient conditions for the existence of the desired estimator,ensuring that the specified performance requirements are met under certain conditions.Then,the estimator gains are derived by minimizing the ellipsoid domain in the sense of trace and a recursive estimator parameter design algorithm is then provided.Finally,a numerical example is conducted to demonstrate the effectiveness of the designed estimator.
文摘Recently, the conditions of observers that can estimate directly Kx（t） for an arbitrarily given K, and that are free of the effect of time delayed states of the system, are formulated. This paper points out that, because of the equivalence in formulation, the existing conditions for unknown input observers can be used to establish directly a new set of sufficient conditions for that recent observer. This new set of sufficient conditions is much simpler, and therefore much more useful and significant, than the sufficient conditions derived in that recent paper. This new set of sufficient conditions also reveals some basic mistakes of that recent paper. In addition, this paper reveals the severe restrictiveness of this new set of conditions and proposes a fundamentally new observer design formulation that can relax that set of conditions significantly.
基金the National Natural Science Foundation of China (60574083)Aeronautics Science Foun-dation of China (2007ZC52039)
文摘A novel robust fault diagnosis scheme, which possesses fault estimate capability as well as fault diagnosis property, is proposed. The scheme is developed based on a suitable combination of the adaptive multiple model （AMM） and unknown input observer （UIO）. The main idea of the proposed scheme stems from the fact that the actuator Lock-in-Place fault is unknown （when and where the actuator gets locked are unknown）, and multiple models are used to describe different fault scenarios, then a bank of unknown input observers are designed to implement the disturbance de-coupling. According to Lyapunov theory, proof of the robustness of the newly developed scheme in the presence of faults and disturbances is derived. Numerical simulation results on an aircraft example show satisfactory performance of the proposed algorithm.
文摘By building mathematical model for HAGC （hydraulic automation gauge control） system of strip rolling mill, treating faults as unknown inputs induced by model uncertainty, and analyzing fault direction, an unknown input fault diagnosis observer group was designed. Fault detection and isolation were realized through making ob- server residuals robust to specific faults but sensitive to other faults. Sufficient existence conditions and design of the observers were given in detail. Diagnosis observer parameters for servo-valve, cylinder, roller and body rolling mill were obtained resoectively. The effectiveness of this diagnosis method was oroved bv actual data simulations.
基金supported by the National Key R&D Program of China(2018AAA0102804)National Natural Science Foundation of China(62020106003,62103250,61773201)+1 种基金Fundamental Research Funds for the Central Universities(NC2020002,NP2020103)Shanghai Sailing Program(21YF1414000)。
文摘This paper investigates the distributed fault-tolerant consensus tracking problem of nonlinear multi-agent systems with general incipient and abrupt time-varying actuator faults under cyber-attacks.First,a decentralized unknown input observer is established to estimate relative states and actuator faults.Second,the estimated and output neighboring information is combined with distributed fault-tolerant consensus tracking controllers.Criteria of reaching leader-following exponential consensus tracking of multi-agent systems under both connectivity-maintained and connectivity-mixed attacks are derived with average dwelling time,attack frequency,and attack activation rate technique,respectively.Simulation example verifies the effectiveness of the fault-tolerant consensus tracking algorithm.
基金supported by the National Natural Science Foundation of China(62020106003,62003162)111 project(B20007)+1 种基金the Natural Science Foundation of Jiangsu Province of China(BK20200416)the China Postdoctoral Science Foundation(2020TQ0151,2020M681590).
文摘Component failures can cause multi-agent system(MAS)performance degradation and even disasters,which provokes the demand of the fault diagnosis method.A distributed sliding mode observer-based fault diagnosis method for MAS is developed in presence of actuator and sensor faults.Firstly,the actuator and sensor faults are extended to the system state,and the system is transformed into a descriptor system form.Then,a sliding mode-based distributed unknown input observer is proposed to estimate the extended state.Furthermore,adaptive laws are introduced to adjust the observer parameters.Finally,the effectiveness of the proposed method is demonstrated with numerical simulations.
基金supported by the National Natural Science Foundation of China (61034005)the Natural Science Foundation of Jiangsu Province (BK2010072)
文摘This paper presents a scheme of fault diagnosis for flexible satellites during orbit maneuver. The main contribution of the paper is related to the design of the nonlinear input observer which can avoid false alarm arising from the disturbance from orbit control force. The effects of orbit control force on the fault diagnosis system for satellite attitude control systems, including the disturbing torque caused by the misalignments and the model uncertainty caused by the fuel consumed, are discussed, where standard Lu- enberger observer cannot work well. Then the nonlinear unknown input observer is proposed to decouple faults from disturbance, Besides, a linear matrix inequality approach is adopted to reduce the effect of nonlinear part and model uncertainties on the observer. The numerical and semi-physical simulation demonstrates the effectiveness of the proposed observer for the fault diagnosis system of the satellite during orbit maneuver.
