Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method mor...Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.展开更多
目的探讨腔镜下保留乳头乳晕复合体(NAC)的腺体切除术复合假体+Ti-Loop补片乳房重建治疗乳腺癌(BC)的效果及对术后并发症的影响。方法选取行BC根治术患者162例,随机分为对照组和研究组,每组81例。对照组予以腔镜下保留NAC的腺体切除术...目的探讨腔镜下保留乳头乳晕复合体(NAC)的腺体切除术复合假体+Ti-Loop补片乳房重建治疗乳腺癌(BC)的效果及对术后并发症的影响。方法选取行BC根治术患者162例,随机分为对照组和研究组,每组81例。对照组予以腔镜下保留NAC的腺体切除术复合即刻假体乳房重建治疗,研究组予以腔镜下保留NAC的腺体切除术复合假体+Ti-Loop补片乳房重建治疗。比较2组手术时间、术中出血量、术后引流时间、开始新辅助化疗时间、术后首次下床活动时间、术后24 h视觉模拟评分法(VAS)评分、住院时间和手术前后乳房美观度评分、自尊量表(SES)评分、生活质量综合评定问卷(GQOLI-74)评分、焦虑自评量表(SAS)评分、抑郁自评量表(SDS)评分及术后并发症、复发、转移和生存情况。结果研究组手术时间长于对照组,但术后首次下床活动时间、住院时间短于对照组,术后24 h VAS评分低于对照组,差异有统计学意义(P<0.05)。术后1周~6个月,研究组BC患者美观度评分高于对照组;术后6个月,研究组SES评分、GQOLI-74评分均高于对照组,SAS评分、SDS评分均低于对照组;研究组皮下积液、切口坏死、上肢水肿和乳头坏死发生率低于对照组,差异有统计学意义(P<0.05)。2组术后随访期间肿瘤局部复发、病死率及远处转移发生率差异无统计学意义(P>0.05)。结论腔镜下保留NAC的腺体切除术复合假体+Ti-Loop补片乳房重建治疗BC手术效果较好,可有效降低术后并发症发生率,安全性好。展开更多
A custom micro-arc oxidation(MAO)apparatus is employed to produce coatings under optimized constant voltage–current two-step power supply mode.Various analytical techniques,including scanning electron microscopy,conf...A custom micro-arc oxidation(MAO)apparatus is employed to produce coatings under optimized constant voltage–current two-step power supply mode.Various analytical techniques,including scanning electron microscopy,confocal laser microscopy,X-ray diffraction,X-ray photoelectron spectroscopy,transmission electron microscopy,and electrochemical analysis,are employed to characterize MAO coatings at different stages of preparation.MAO has MgO,hydroxyapatite,Ca_(3)(PO_(4))_(2),and Mg2SiO4 phases.Its microstructure of the coating is characterized by"multiple breakdowns,pores within pores",and"repaired blind pores".The porosity and the uniformity of MAO coating first declines in the constant voltage mode,then augments while the discharge phenomenon takes place,and finally decreases in the repair stage.These analyses reveal a four-stage growth pattern for MAO coatings:anodic oxidation stage,micro-arc oxidation stage,breakdown stage,and repairing stage.During anodic oxidation and MAO stages,inward growth prevails,while the breakdown stage sees outward and accelerated growth.Simultaneous inward and outward growth in the repair stage results in a denser,more uniform coating with increased thickness and improved corrosion resistance.展开更多
In existing studies, most slope stability analyses concentrate on conditions with constant temperature, assuming the slope is intact, and employ the Mohr-Coulomb (M-C) failure criterion for saturated soil to character...In existing studies, most slope stability analyses concentrate on conditions with constant temperature, assuming the slope is intact, and employ the Mohr-Coulomb (M-C) failure criterion for saturated soil to characterize the strength of the backfill. However, the actual working temperature of slopes varies, and natural phenomena such as rainfall and groundwater infiltration commonly result in unsaturated soil conditions, with cracks typically present in cohesive slopes. This study introduces a novel approach for assessing the stability of unsaturated soil stepped slopes under varying temperatures, incorporating the effects of open and vertical cracks. Utilizing the kinematic approach and gravity increase method, we developed a three-dimensional (3D) rotational wedge failure mechanism to simulate slope collapse, enhancing the traditional two-dimensional analyses. We integrated temperature-dependent functions and nonlinear shear strength equations to evaluate the impact of temperature on four typical unsaturated soil types. A particle swarm optimization algorithm was employed to calculate the safety factor, ensuring our method’s accuracy by comparing it with existing studies. The results indicate that considering 3D effects yields a higher safety factor, while cracks reduce slope stability. Each unsaturated soil exhibits a distinctive temperature response curve, highlighting the importance of understanding soil types in the design phase.展开更多
High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production meth...High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.展开更多
As space technology advances,thermal control systems must effectively collect and dissipate heat from distributed,multi-source environments.Loop heat pipe is a highly reliable two-phase heat transfer component,but it ...As space technology advances,thermal control systems must effectively collect and dissipate heat from distributed,multi-source environments.Loop heat pipe is a highly reliable two-phase heat transfer component,but it has several limitations when addressing multi-source heat dissipation.Inspired by the transport and heat dissipation system of plants,large trees achieve stable and efficient liquid supply under the influence of two driving forces:capillary force during transpiration in the leaves(pull)and root pressure generated by osmotic pressure in the roots(push).The root pressure provides an effective liquid supply with a driving force exceeding 2 MPa,far greater than the driving force in conventional capillary-pumped two-phase loops.Research has shown that osmotic heat pipes offer a powerful driving force,and combining osmotic pressure with capillary force has significant advantages.Therefore,this paper designs a multi-evaporator,dual-drive two-phase loop,using both osmotic pressure and capillary force to solve the multi-source heat dissipation challenge.First,a transmembrane water flux model for the osmotic pressure-driven device was established to predict the maximum heat transfer capacity of the dual-drive two-phase loop.Then,an experimental setup for a multi-evaporator“osmotic pressure+capillary force”dual-drive two-phase loop was constructed,capable of transferring at least 235 W of power under a reverse gravity condition of 20 m.The study also analyzed the effects of reverse gravity height,heat load distribution among the three evaporators,startup sequence,and varying branch resistances on the performance of the dual-drive two-phase loop.展开更多
【目的】掌握骨唇黄河鱼(Chuanchia labiosa)其野生种质资源现状,了解其系统发育关系和进化状况。【方法】对野外采样的106尾骨唇黄河鱼进行mt DNA Cytb,COX1和D-Loop基因多样性对比。【结果】结果表明9个裂腹鱼亚科群体系统发育进化树...【目的】掌握骨唇黄河鱼(Chuanchia labiosa)其野生种质资源现状,了解其系统发育关系和进化状况。【方法】对野外采样的106尾骨唇黄河鱼进行mt DNA Cytb,COX1和D-Loop基因多样性对比。【结果】结果表明9个裂腹鱼亚科群体系统发育进化树分为3大支,Network与系统发育树结果基本一致。骨唇黄河鱼Tajima’sD和Fu’sFs检验及错配分布分析均表明其经历过种群扩张,不同种群分离的时间可能与青藏高原地质运动有关。【结论】骨唇黄河鱼的遗传多样性相对较低,呈高单倍型多样度和低核苷酸多样度的特点。展开更多
Magnesium alloy thin-walled cylindrical components with the advantages of high specific stiffness and strength present broad prospect for the lightweight of aerospace components.However,poor formability resulting from...Magnesium alloy thin-walled cylindrical components with the advantages of high specific stiffness and strength present broad prospect for the lightweight of aerospace components.However,poor formability resulting from the hexagonal close-packed crystal structure in magnesium alloy puts forwards a great challenge for thin-walled cylindrical components fabrication,especially for extreme structure with the thicknesschanging web and the high thin-wall.In this research,an ZK61 magnesium alloy thin-walled cylindrical component was successfully fabricated by two-step forging,i.e.,the pre-forging and final-forging is mainly used for wed and thin-wall formation,respectively.Microstructure and mechanical properties at the core,middle and margin of the web and the thin-wall of the pre-forged and final-forged components are studied in detail.Due to the large strain-effectiveness and metal flow along the radial direction(RD),the grains of the web are all elongated along RD for the pre-forged component,where an increasingly elongated trend is found from the core to the margin of the wed.A relatively low recrystallized degree occurs during pre-forging,and the web at different positions are all with prismatic and pyramid textures.During finalforging,the microstructures of the web and the thin-wall are almost equiaxed due to the remarkable occurrence of dynamic recrystallization.Similarity,except for few basal texture of the thin-wall,only prismatic and pyramid textures are found for the final-forged component.Compared with the initial billet,an obviously improved mechanical isotropy is achieved during pre-forging,which is well-maintained during final-forging.展开更多
Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of un...Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of unsteady flows.To enhance computational efficiency,we propose the Implicit-Explicit Two-Step Runge-Kutta(IMEX-TSRK)time-stepping discretization methods for unsteady flows,and develop a novel adaptive algorithm that correctly partitions spatial regions to apply implicit or explicit methods.The novel adaptive IMEX-TSRK schemes effectively handle the numerical stiffness of the small grid size and improve computational efficiency.Compared to implicit and explicit Runge-Kutta(RK)schemes,the IMEX-TSRK methods achieve the same order of accuracy with fewer first derivative calculations.Numerical case tests demonstrate that the IMEX-TSRK methods maintain numerical stability while enhancing computational efficiency.Specifically,in high Reynolds number flows,the computational efficiency of the IMEX-TSRK methods surpasses that of explicit RK schemes by more than one order of magnitude,and that of implicit RK schemes several times over.展开更多
With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.A...With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.As an efficient two-phase heat transfer device with active temperature control capabilities,the loop heat pipe(LHP)can be widely applied in spacecraft thermal control systems to achieve reliable temperature control under various operating modes and complex space thermal environments.This paper analyzes the fundamental theories of thermal switch-controlled,reservoir temperature-controlled,and bypass valve-controlled LHPs.The focus is on the theories and methods of achieving high-precision and high-reliability temperature control via active reservoir temperature control.Novel control techniques in recent years,such as non-condensable gas(NCG)control with a temperature stability of 0.01℃ ,are also briefly introduced as promising approaches to improve LHP performance.The on-orbit performance and characteristics of various LHP temperature control methods are provided and ranked in terms of control precision,energy consumption,complexity,and weight.Thermoelectric cooler(TEC)/electrical heater,as the foundation of reservoir temperature control,can achieve a temperature stability of in space applications under±0.2℃ a wide range of heat load.Microgravity model,control strategy,and operating mode conversion are three optimization directions that would hopefully further expand the application scenario of reservoir temperature control.Specific design principles and challenges for corresponding directions are summarized as guidance for researchers.展开更多
Ti-based bulk metallic glasses(BMGs)have attracted increasing attention due to their high specific strength.However,a fundamental conflict exists between the specific strength and glass-forming ability(GFA)of Ti-based...Ti-based bulk metallic glasses(BMGs)have attracted increasing attention due to their high specific strength.However,a fundamental conflict exists between the specific strength and glass-forming ability(GFA)of Ti-based BMGs,restricting their commercial applications significantly.In this study,this challenge was addressed by introducing a two-step alloying strategy to mitigate the remarkable density increment effect associated with heavy alloying elements required for enhancing the GFA.Consequently,through two-step alloying with Al and Fe in sequence,simultaneous enhancements in specific strength and GFA were achieved based on a Ti-Zr-Be ternary metallic glass,resulting in the development of a series of centimeter-sized metallic glasses exhibiting ultrahigh-specific strength.Notably,the newly developed(Ti_(45)Zr_(20)Be_(31)A_(l4))_(94)Fe_(6)alloy established a new record for the specific strength of Ti-based BMGs.Along with a critical diameter(D_(c))of 10 mm,it offers the optimal scheme for balancing the specific strength and GFA of Ti-based BMGs.The present results further brighten the application prospects of Ti-based BMGs as lightweight materials.展开更多
基金supported by the National Natural Science Foun-dation of China(Nos.52025028,52332008,52372214,52202273,and U22A20137)the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions.
文摘Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.
文摘目的探讨腔镜下保留乳头乳晕复合体(NAC)的腺体切除术复合假体+Ti-Loop补片乳房重建治疗乳腺癌(BC)的效果及对术后并发症的影响。方法选取行BC根治术患者162例,随机分为对照组和研究组,每组81例。对照组予以腔镜下保留NAC的腺体切除术复合即刻假体乳房重建治疗,研究组予以腔镜下保留NAC的腺体切除术复合假体+Ti-Loop补片乳房重建治疗。比较2组手术时间、术中出血量、术后引流时间、开始新辅助化疗时间、术后首次下床活动时间、术后24 h视觉模拟评分法(VAS)评分、住院时间和手术前后乳房美观度评分、自尊量表(SES)评分、生活质量综合评定问卷(GQOLI-74)评分、焦虑自评量表(SAS)评分、抑郁自评量表(SDS)评分及术后并发症、复发、转移和生存情况。结果研究组手术时间长于对照组,但术后首次下床活动时间、住院时间短于对照组,术后24 h VAS评分低于对照组,差异有统计学意义(P<0.05)。术后1周~6个月,研究组BC患者美观度评分高于对照组;术后6个月,研究组SES评分、GQOLI-74评分均高于对照组,SAS评分、SDS评分均低于对照组;研究组皮下积液、切口坏死、上肢水肿和乳头坏死发生率低于对照组,差异有统计学意义(P<0.05)。2组术后随访期间肿瘤局部复发、病死率及远处转移发生率差异无统计学意义(P>0.05)。结论腔镜下保留NAC的腺体切除术复合假体+Ti-Loop补片乳房重建治疗BC手术效果较好,可有效降低术后并发症发生率,安全性好。
文摘A custom micro-arc oxidation(MAO)apparatus is employed to produce coatings under optimized constant voltage–current two-step power supply mode.Various analytical techniques,including scanning electron microscopy,confocal laser microscopy,X-ray diffraction,X-ray photoelectron spectroscopy,transmission electron microscopy,and electrochemical analysis,are employed to characterize MAO coatings at different stages of preparation.MAO has MgO,hydroxyapatite,Ca_(3)(PO_(4))_(2),and Mg2SiO4 phases.Its microstructure of the coating is characterized by"multiple breakdowns,pores within pores",and"repaired blind pores".The porosity and the uniformity of MAO coating first declines in the constant voltage mode,then augments while the discharge phenomenon takes place,and finally decreases in the repair stage.These analyses reveal a four-stage growth pattern for MAO coatings:anodic oxidation stage,micro-arc oxidation stage,breakdown stage,and repairing stage.During anodic oxidation and MAO stages,inward growth prevails,while the breakdown stage sees outward and accelerated growth.Simultaneous inward and outward growth in the repair stage results in a denser,more uniform coating with increased thickness and improved corrosion resistance.
基金Project(51378510) supported by the National Natural Science Foundation of China。
文摘In existing studies, most slope stability analyses concentrate on conditions with constant temperature, assuming the slope is intact, and employ the Mohr-Coulomb (M-C) failure criterion for saturated soil to characterize the strength of the backfill. However, the actual working temperature of slopes varies, and natural phenomena such as rainfall and groundwater infiltration commonly result in unsaturated soil conditions, with cracks typically present in cohesive slopes. This study introduces a novel approach for assessing the stability of unsaturated soil stepped slopes under varying temperatures, incorporating the effects of open and vertical cracks. Utilizing the kinematic approach and gravity increase method, we developed a three-dimensional (3D) rotational wedge failure mechanism to simulate slope collapse, enhancing the traditional two-dimensional analyses. We integrated temperature-dependent functions and nonlinear shear strength equations to evaluate the impact of temperature on four typical unsaturated soil types. A particle swarm optimization algorithm was employed to calculate the safety factor, ensuring our method’s accuracy by comparing it with existing studies. The results indicate that considering 3D effects yields a higher safety factor, while cracks reduce slope stability. Each unsaturated soil exhibits a distinctive temperature response curve, highlighting the importance of understanding soil types in the design phase.
基金Natural Science Foundation of Shanghai(24ZR1400800)he Natural Science Foundation of China(U23A20685,52073058,91963204)+1 种基金the National Key R&D Program of China(2021YFB3701400)Shanghai Sailing Program(23YF1400200)。
文摘High-performance graphite materials have important roles in aerospace and nuclear reactor technologies because of their outstanding chemical stability and high-temperature performance.Their traditional production method relies on repeated impregnation-carbonization and graphitization,and is plagued by lengthy preparation cycles and high energy consumption.Phase transition-assisted self-pressurized selfsintering technology can rapidly produce high-strength graphite materials,but the fracture strain of the graphite materials produced is poor.To solve this problem,this study used a two-step sintering method to uniformly introduce micro-nano pores into natural graphite-based bulk graphite,achieving improved fracture strain of the samples without reducing their density and mechanical properties.Using natural graphite powder,micron-diamond,and nano-diamond as raw materials,and by precisely controlling the staged pressure release process,the degree of diamond phase transition expansion was effectively regulated.The strain-to-failure of the graphite samples reached 1.2%,a 35%increase compared to samples produced by fullpressure sintering.Meanwhile,their flexural strength exceeded 110 MPa,and their density was over 1.9 g/cm^(3).The process therefore produced both a high strength and a high fracture strain.The interface evolution and toughening mechanism during the two-step sintering process were investigated.It is believed that the micro-nano pores formed have two roles:as stress concentrators they induce yielding by shear and as multi-crack propagation paths they significantly lengthen the crack propagation path.The two-step sintering phase transition strategy introduces pores and provides a new approach for increasing the fracture strain of brittle materials.
基金Science Foundation for Distinguished Young Scholars 2020-JCJQ-ZQ-042 Intelligent and Bionic Spacecraft Thermal Control Technology Inspired by Tree Sap Transport Principle.
文摘As space technology advances,thermal control systems must effectively collect and dissipate heat from distributed,multi-source environments.Loop heat pipe is a highly reliable two-phase heat transfer component,but it has several limitations when addressing multi-source heat dissipation.Inspired by the transport and heat dissipation system of plants,large trees achieve stable and efficient liquid supply under the influence of two driving forces:capillary force during transpiration in the leaves(pull)and root pressure generated by osmotic pressure in the roots(push).The root pressure provides an effective liquid supply with a driving force exceeding 2 MPa,far greater than the driving force in conventional capillary-pumped two-phase loops.Research has shown that osmotic heat pipes offer a powerful driving force,and combining osmotic pressure with capillary force has significant advantages.Therefore,this paper designs a multi-evaporator,dual-drive two-phase loop,using both osmotic pressure and capillary force to solve the multi-source heat dissipation challenge.First,a transmembrane water flux model for the osmotic pressure-driven device was established to predict the maximum heat transfer capacity of the dual-drive two-phase loop.Then,an experimental setup for a multi-evaporator“osmotic pressure+capillary force”dual-drive two-phase loop was constructed,capable of transferring at least 235 W of power under a reverse gravity condition of 20 m.The study also analyzed the effects of reverse gravity height,heat load distribution among the three evaporators,startup sequence,and varying branch resistances on the performance of the dual-drive two-phase loop.
文摘【目的】掌握骨唇黄河鱼(Chuanchia labiosa)其野生种质资源现状,了解其系统发育关系和进化状况。【方法】对野外采样的106尾骨唇黄河鱼进行mt DNA Cytb,COX1和D-Loop基因多样性对比。【结果】结果表明9个裂腹鱼亚科群体系统发育进化树分为3大支,Network与系统发育树结果基本一致。骨唇黄河鱼Tajima’sD和Fu’sFs检验及错配分布分析均表明其经历过种群扩张,不同种群分离的时间可能与青藏高原地质运动有关。【结论】骨唇黄河鱼的遗传多样性相对较低,呈高单倍型多样度和低核苷酸多样度的特点。
基金supported by the National Natural Science Foundation of China(No.52405408,No.U21A20131,No.U2037204,No.52422510)the Natural Science Foundation of Hubei Province(No.2023AFB116)+1 种基金the State Key Laboratory of Materials Processing and Die&Mould TechnologyHuazhong University of Science and Technology(No.P2022-005)。
文摘Magnesium alloy thin-walled cylindrical components with the advantages of high specific stiffness and strength present broad prospect for the lightweight of aerospace components.However,poor formability resulting from the hexagonal close-packed crystal structure in magnesium alloy puts forwards a great challenge for thin-walled cylindrical components fabrication,especially for extreme structure with the thicknesschanging web and the high thin-wall.In this research,an ZK61 magnesium alloy thin-walled cylindrical component was successfully fabricated by two-step forging,i.e.,the pre-forging and final-forging is mainly used for wed and thin-wall formation,respectively.Microstructure and mechanical properties at the core,middle and margin of the web and the thin-wall of the pre-forged and final-forged components are studied in detail.Due to the large strain-effectiveness and metal flow along the radial direction(RD),the grains of the web are all elongated along RD for the pre-forged component,where an increasingly elongated trend is found from the core to the margin of the wed.A relatively low recrystallized degree occurs during pre-forging,and the web at different positions are all with prismatic and pyramid textures.During finalforging,the microstructures of the web and the thin-wall are almost equiaxed due to the remarkable occurrence of dynamic recrystallization.Similarity,except for few basal texture of the thin-wall,only prismatic and pyramid textures are found for the final-forged component.Compared with the initial billet,an obviously improved mechanical isotropy is achieved during pre-forging,which is well-maintained during final-forging.
基金supported by the National Natural Science Foundation of China(No.92252201)the Fundamental Research Funds for the Central Universitiesthe Academic Excellence Foundation of Beihang University(BUAA)for PhD Students。
文摘Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of unsteady flows.To enhance computational efficiency,we propose the Implicit-Explicit Two-Step Runge-Kutta(IMEX-TSRK)time-stepping discretization methods for unsteady flows,and develop a novel adaptive algorithm that correctly partitions spatial regions to apply implicit or explicit methods.The novel adaptive IMEX-TSRK schemes effectively handle the numerical stiffness of the small grid size and improve computational efficiency.Compared to implicit and explicit Runge-Kutta(RK)schemes,the IMEX-TSRK methods achieve the same order of accuracy with fewer first derivative calculations.Numerical case tests demonstrate that the IMEX-TSRK methods maintain numerical stability while enhancing computational efficiency.Specifically,in high Reynolds number flows,the computational efficiency of the IMEX-TSRK methods surpasses that of explicit RK schemes by more than one order of magnitude,and that of implicit RK schemes several times over.
基金funded by National Outstanding Youth Foundation of China,grant number 2020-JCJQ-ZQ-042.
文摘With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.As an efficient two-phase heat transfer device with active temperature control capabilities,the loop heat pipe(LHP)can be widely applied in spacecraft thermal control systems to achieve reliable temperature control under various operating modes and complex space thermal environments.This paper analyzes the fundamental theories of thermal switch-controlled,reservoir temperature-controlled,and bypass valve-controlled LHPs.The focus is on the theories and methods of achieving high-precision and high-reliability temperature control via active reservoir temperature control.Novel control techniques in recent years,such as non-condensable gas(NCG)control with a temperature stability of 0.01℃ ,are also briefly introduced as promising approaches to improve LHP performance.The on-orbit performance and characteristics of various LHP temperature control methods are provided and ranked in terms of control precision,energy consumption,complexity,and weight.Thermoelectric cooler(TEC)/electrical heater,as the foundation of reservoir temperature control,can achieve a temperature stability of in space applications under±0.2℃ a wide range of heat load.Microgravity model,control strategy,and operating mode conversion are three optimization directions that would hopefully further expand the application scenario of reservoir temperature control.Specific design principles and challenges for corresponding directions are summarized as guidance for researchers.
基金supported by the National Natural Science Foundation of China(Nos.52271148 and 51871129).
文摘Ti-based bulk metallic glasses(BMGs)have attracted increasing attention due to their high specific strength.However,a fundamental conflict exists between the specific strength and glass-forming ability(GFA)of Ti-based BMGs,restricting their commercial applications significantly.In this study,this challenge was addressed by introducing a two-step alloying strategy to mitigate the remarkable density increment effect associated with heavy alloying elements required for enhancing the GFA.Consequently,through two-step alloying with Al and Fe in sequence,simultaneous enhancements in specific strength and GFA were achieved based on a Ti-Zr-Be ternary metallic glass,resulting in the development of a series of centimeter-sized metallic glasses exhibiting ultrahigh-specific strength.Notably,the newly developed(Ti_(45)Zr_(20)Be_(31)A_(l4))_(94)Fe_(6)alloy established a new record for the specific strength of Ti-based BMGs.Along with a critical diameter(D_(c))of 10 mm,it offers the optimal scheme for balancing the specific strength and GFA of Ti-based BMGs.The present results further brighten the application prospects of Ti-based BMGs as lightweight materials.
