The incompressible two-phase flows are simulated using combination of an etching multiblock method and a diffuse interface （DI） model, particularly in the com- plex domain that can be decomposed into multiple rectan...The incompressible two-phase flows are simulated using combination of an etching multiblock method and a diffuse interface （DI） model, particularly in the com- plex domain that can be decomposed into multiple rectangular subdomains. The etching multiblock method allows natural communications between the connected subdomains and the efficient parallel computation. The DI model can consider two-phase flows with a large density ratio, and simulate the flows with the moving contact line （MCL） when a geometric formulation of the MCL model is included. Therefore, combination of the etch- ing method and the DI model has potential to deal with a variety of two-phase flows in industrial applications. The performance is examined through a series of numerical exper- iments. The convergence of the etching method is firstly tested by simulating single-phase flows past a square cylinder, and the method for the multiphase flow simulation is vali- dated by investing drops dripping from a pore. The numerical results are compared with either those from other researchers or experimental data. Good agreement is achieved. The method is also used to investigate the impact of a droplet on a grooved substrate and droplet generation in flow focusing devices.展开更多
Anisotropic materials, like carbon nanotubes(CNTs), are the perfect substitutes to overcome the limitations of conventional metamaterials; however, the successful fabrication of CNT forest metamaterial structures is s...Anisotropic materials, like carbon nanotubes(CNTs), are the perfect substitutes to overcome the limitations of conventional metamaterials; however, the successful fabrication of CNT forest metamaterial structures is still very challenging. In this study, a new method utilizing a focused ion beam(FIB) with additional secondary etching is presented, which can obtain uniform and fine patterning of CNT forest nanostructures for metamaterials and ranging in sizes from hundreds of nanometers to several micrometers. The influence of the FIB processing parameters on the morphology of the catalyst surface and the growth of the CNT forest was investigated, including the removal of redeposited material,decreasing the average surface roughness(from 0.45 to 0.15 nm), and a decrease in the thickness of the Fe catalyst.The results showed that the combination of FIB patterning and secondary etching enabled the growth of highly aligned, highdensity CNT forest metamaterials. The improvement in the quality of single-walled CNTs(SWNTs), defined by the very high G/D peak ratio intensity of 10.47, demonstrated successful fine patterning of CNT forest for the first time. With a FIB patterning depth of 10 nm and a secondary etching of 0.5 nm, a minimum size of 150 nm of CNT forest metamaterials was achieved. The development of the FIB secondary etching method enabled for the first time, the fabrication of SWNT forest metamaterials for the optical and infrared regime, for future applications, e.g., in superlenses, antennas,or thermal metamaterials.展开更多
We described a method for obtaining fluorine-free Ti_(3)C_(2)Cl_(2)MXene phases by melting copper in CuCl_(2)instead of aluminum in Ti_(3)AlC_(2).XRD results show that when molten salt CuCl_(2)etches Ti_(3)AlC_(2),it ...We described a method for obtaining fluorine-free Ti_(3)C_(2)Cl_(2)MXene phases by melting copper in CuCl_(2)instead of aluminum in Ti_(3)AlC_(2).XRD results show that when molten salt CuCl_(2)etches Ti_(3)AlC_(2),it forms an intermediate product Ti_(3)CuC_(2),and then reacts with Ti_(3)CuC_(2)to obtain Ti_(3)C_(2)Cl_(2).The reaction of Ti_(3)AlC_(2)and CuCl_(2)at a temperature of 800℃for 2 h to obtain Ti_(3)C_(2)Cl_(2)with an optimal lamellar structure is shown in SEM results.The pseudopotential plane-wave(PP-PW)method is used to calculate on the electronic structure.The etching mechanism is investigated by the total energies of each substance.The chemical reaction of Ti_(3)AlC_(2)and CuCl_(2)will first become Ti_(3)CuC_(2)and Cu,and then become Ti_(3)C_(2)Cl_(2)during the Lewis acid etching process,which are consistent with the experimental results.展开更多
Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of un...Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of unsteady flows.To enhance computational efficiency,we propose the Implicit-Explicit Two-Step Runge-Kutta(IMEX-TSRK)time-stepping discretization methods for unsteady flows,and develop a novel adaptive algorithm that correctly partitions spatial regions to apply implicit or explicit methods.The novel adaptive IMEX-TSRK schemes effectively handle the numerical stiffness of the small grid size and improve computational efficiency.Compared to implicit and explicit Runge-Kutta(RK)schemes,the IMEX-TSRK methods achieve the same order of accuracy with fewer first derivative calculations.Numerical case tests demonstrate that the IMEX-TSRK methods maintain numerical stability while enhancing computational efficiency.Specifically,in high Reynolds number flows,the computational efficiency of the IMEX-TSRK methods surpasses that of explicit RK schemes by more than one order of magnitude,and that of implicit RK schemes several times over.展开更多
In-situ characterization of non-aqueous nano-dispersion systems（NANDS） by freeze-etching transmission electron microscope（FETEM） was reported.To improve just-for-once successive rate of specimen preparation and ge...In-situ characterization of non-aqueous nano-dispersion systems（NANDS） by freeze-etching transmission electron microscope（FETEM） was reported.To improve just-for-once successive rate of specimen preparation and get good characterization results,an improving specimen preparation method of freezing etching was developed.Size,distribution and morphology of NANDS were directly visualized.Some information of particle dispersion feature and particle density can also be obtained.Reproductivity of the FETEM characterization is excellent.Comparing with laser scattering method,which is liable to give positive error especially for small size particle anchoring disperser,FETEM characterization can give more accurate measurement of particle size.Moreover,FETEM can give dispersion feature of nanoparticle in non-aqueous medium.展开更多
Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and ab...Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was-140 K. The films＇ exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH3NH3Pb I（3-x）Clx films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices.展开更多
The adsorption of CO_(2) on MgAl layered double hydroxides(MgAl-LDHs) based adsorbents has been an effective way to capture CO_(2),however the adsorption capacity was hampered due to the pore structure and the dispers...The adsorption of CO_(2) on MgAl layered double hydroxides(MgAl-LDHs) based adsorbents has been an effective way to capture CO_(2),however the adsorption capacity was hampered due to the pore structure and the dispersibility of adsorption active sites.To address the problem,we investigate the effect of intercalated anion and alkaline etching time on the structure,morphology and CO_(2) uptake performances of MgAl-LDHs.MgAl-LDHs are synthesized by the onepot hydrothermal method,followed by alkaline etching of NaOH,and characterized by x-ray diffraction,N_(2) adsorption,scanning electron microscopy and Fourier transform infrared spectroscopy.The CO_(2) adsorption tests of the samples are performed on a thermogravimetric analyzer,and the adsorption data are fitted by the first-order,pseudo-second-order and Elovich models,respectively.The results demonstrate that among the three intercalated samples,MgAl(Cl) using chloride salts as precursors possesses the highest adsorption capacity of CO_(2),owing to high crystallinity and porous structure,while MgAl(Ac) employing acetate salts as precursors displays the lowest CO_(2) uptake because of poor crystallinity,disorderly stacked structure and unsatisfactory pore structure.With regard to alkaline etching,the surface of the treated MgAl(Cl) is partly corroded,thus the specific surface area and pore volume increase,which is conducive to the exposure of adsorption active sites.Correspondingly,the adsorption performance of the alkaline-etched adsorbents is significantly improved,and MgAl(Cl)-6 has the highest CO_(2) uptake.With the alkaline etching time further increasing,the CO_(2) adsorption capacity of MgAl(Cl)-9 sharply decreases,mainly due to the collapse of pore structure and the fragmentized sheet-structure.Hence,the CO_(2) adsorption performance is greatly influenced by alkaline etching time,and appropriate alkaline etching time can facilitate the contact between CO_(2) molecules and the adsorbent.展开更多
The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of re...The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of remaining oil. Logging data are required to accomplish this. However, many such projects cannot be completed. Since the old study of remaining oil distribution could not be quantified efficiently, the ＂dynamic two-step method＂ is presented. Firstly, the water cut of every flow unit in one well at one time is calculated according to the comprehensive water cut of a single well at one time. Secondly, the remaining oil saturation of the flow unit of the well at one time is calculated based on the water cut of the flow unit at a given time. The results show that ＂dynamic two-step method＂ has characteristics of simplicity and convenience, and is especially suitable for the study of remaining oil distribution at high water-cut stage. The distribution of remaining oil presented banding and potato form, remaining oil was relatively concentrated in faultage neighborhood and imperfect well netting position, and the net thickness of the place was great. This proposal can provide an effective way to forecast remaining oil distribution and enhance oil recovery, especially applied at the high water-cut stage.展开更多
ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis ...ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.展开更多
Process technology of multiple cylindrical micro-pins by wire-electrical discharge machining （wire-EDM） and electrochemical etching was presented. A row of rectangular micro-columns were machined by wire-EDM and the...Process technology of multiple cylindrical micro-pins by wire-electrical discharge machining （wire-EDM） and electrochemical etching was presented. A row of rectangular micro-columns were machined by wire-EDM and then machined into cylindrical shape by electrochemical etching. However, the shape of the multiple electrodes and the consistent sizes of the electrodes row are not easy to be controlled. In the electrochemical process, the shape of the cathode electrode determines the current density distribution on the anode and so the forming of multiple electrodes. This paper proposes a finite element method （FEM） to accurately optimize the electrode profile. The microelectrodes row with uniformity diameters with size from hundreds micrometers to several decades could be fabricated, and mathematical model controlling the shape and diameter of multiple microelectrodes was provided. Furthermore, a good agreement between experimental and theoretical results was confirmed.展开更多
Molecular dynamics （MD） simulations were performed to investigate F＋ continuously bombarding SiC surfaces with energies of 100 eV at different incident angles at 300 K. The simulated results show that the steady-st...Molecular dynamics （MD） simulations were performed to investigate F＋ continuously bombarding SiC surfaces with energies of 100 eV at different incident angles at 300 K. The simulated results show that the steady-state uptake of F atoms increases with increasing incident angle. With the steady-state etching established, a Si-C-F reactive layer is formed. It is found that the etching yield of Si is greater than that of C. In the F-containing reaction layer, the SiF species is dominant with incident angles less than 30°. For all incident angles, the CF species is dominant over CF2 and CF3.展开更多
Refined control of etched profile in microelectronic devices during plasma etching process is one of the most important tasks of front-end and back-end microelectronic devices manufacturing technologies. A comprehensi...Refined control of etched profile in microelectronic devices during plasma etching process is one of the most important tasks of front-end and back-end microelectronic devices manufacturing technologies. A comprehensive simulation of etching profile evolution requires knowledge of the etching rates at all the points of the profile surface during the etching process. Electrons do not contribute directly to the material removal, but they are the source, together with positive ions, of the profile charging that has many negative consequences on the final outcome of the process especially in the case of insulating material etching. The ability to simulate feature charging was added to the 3D level set profile evolution simulator described earlier. The ion and electron fluxes were computed along the feature using Monte Carlo method. The surface potential profiles and electric field for the entire feature were generated by solving Laplace equation using finite elements method. Calculations were performed in the case of simplified model of Ar+/CF4 non-equilibrium plasma etching of SiO2.展开更多
In this paper,a two-step iteration method is established which can be viewed as a generalization of the existing modulus-based methods for vertical linear complementarity problems given by He and Vong(Appl.Math.Lett.1...In this paper,a two-step iteration method is established which can be viewed as a generalization of the existing modulus-based methods for vertical linear complementarity problems given by He and Vong(Appl.Math.Lett.134:108344,2022).The convergence analysis of the proposed method is established,which can improve the existing results.Numerical examples show that the proposed method is efficient with the two-step technique.展开更多
Under the assumption that the nonlinear operator has Lipschitz continuous divided differences for the first order,we obtain an estimate of the radius of the convergence ball for the two-step secant method.Moreover,we ...Under the assumption that the nonlinear operator has Lipschitz continuous divided differences for the first order,we obtain an estimate of the radius of the convergence ball for the two-step secant method.Moreover,we also provide an error estimate that matches the convergence order of the two-step secant method.At last,we give an application of the proposed theorem.展开更多
Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method mor...Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.展开更多
The Adomian decomposition method (ADM) can be used to solve a wide range of problems and usually gets the solution in a series form. In this paper, we propose two-step Adomian Decomposition Method (TSAM) for nonlinear...The Adomian decomposition method (ADM) can be used to solve a wide range of problems and usually gets the solution in a series form. In this paper, we propose two-step Adomian Decomposition Method (TSAM) for nonlinear integro-differential equations that will facilitate the calculations. In this modification, compared to the standard Adomian decomposition method, the size of calculations was reduced. This modification also avoids computing Adomian polynomials. Numerical results are given to show the efficiency and performance of this method.展开更多
The accelerating factor （AF） method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics （HD） simulation, the relationsh...The accelerating factor （AF） method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics （HD） simulation, the relationship between the diffusion coefficient along the direction of z-axis which is normal to the Mg/Zn interface and temperature was investigated, and the AF＇s impact on the diffusion constant （D0） and activation energy （Q^＊） was studied. Then, two steps were taken to simulate the atomic diffusion process and the formation of new phases： one for acceleration and the other for equilibration. The results show that： the Arrhenius equation works well for the description of Dz with different accelerating factors; the AF has no effect on the diffusion constant Do in the case of no phase transition; and the relationship between Q＊ and Q conforms to Q^＊=Q/A. Then, the new Arrhenius equation for AFHD is successfully constructed as Dz=Doexp[-Q/（ART）]. Meanwhile, the authentic equilibrium conformations at any dynamic moment can only be reproduced by the equilibration simulation of the HD-simulated configurations. Key words： accelerating factor method; Arrhenius equation; two-steps scheme; Mg/Zn interface; hyperdynamic simulation展开更多
In this paper, large-sized sapphire （Φ230×210 mm, 27.5 kg） was grown by SAPMAC method （sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center）. Dislocation peculiarity in la...In this paper, large-sized sapphire （Φ230×210 mm, 27.5 kg） was grown by SAPMAC method （sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center）. Dislocation peculiarity in large sapphire boule （0001） basal plane was investigated by chemical etchiing, scanning electron microscopy and X-ray topography method. The triangular dislocation etch pit measured is 7.6× 10^1-8.0×10^2 cm^2, in which relative high-density dislocations were generated at both initial and final stages of crystal growth. The analysis of single-crystal X-ray topography shows that there are no apparent sub-grain boundaries; the dislocation lines are isolated and straight. Finally, the origins of low-density dislocation in sapphire crystal are discussed by numerical analysis method.展开更多
The paper aims to demonstrate the system of SANYI biogas power generation by two-step method which can produce methane and generate electricity effectively and stably.So it can be stable synchronization meshwork energ...The paper aims to demonstrate the system of SANYI biogas power generation by two-step method which can produce methane and generate electricity effectively and stably.So it can be stable synchronization meshwork energy source establishment and provide references to develop an effective and stable project of producing methane and generating electricity.展开更多
基金Project supported by the National Natural Science Foundation of China(No.11425210)the Fundamental Research Funds for the Central Universities(No.WK2090050025)
文摘The incompressible two-phase flows are simulated using combination of an etching multiblock method and a diffuse interface （DI） model, particularly in the com- plex domain that can be decomposed into multiple rectangular subdomains. The etching multiblock method allows natural communications between the connected subdomains and the efficient parallel computation. The DI model can consider two-phase flows with a large density ratio, and simulate the flows with the moving contact line （MCL） when a geometric formulation of the MCL model is included. Therefore, combination of the etch- ing method and the DI model has potential to deal with a variety of two-phase flows in industrial applications. The performance is examined through a series of numerical exper- iments. The convergence of the etching method is firstly tested by simulating single-phase flows past a square cylinder, and the method for the multiphase flow simulation is vali- dated by investing drops dripping from a pore. The numerical results are compared with either those from other researchers or experimental data. Good agreement is achieved. The method is also used to investigate the impact of a droplet on a grooved substrate and droplet generation in flow focusing devices.
文摘Anisotropic materials, like carbon nanotubes(CNTs), are the perfect substitutes to overcome the limitations of conventional metamaterials; however, the successful fabrication of CNT forest metamaterial structures is still very challenging. In this study, a new method utilizing a focused ion beam(FIB) with additional secondary etching is presented, which can obtain uniform and fine patterning of CNT forest nanostructures for metamaterials and ranging in sizes from hundreds of nanometers to several micrometers. The influence of the FIB processing parameters on the morphology of the catalyst surface and the growth of the CNT forest was investigated, including the removal of redeposited material,decreasing the average surface roughness(from 0.45 to 0.15 nm), and a decrease in the thickness of the Fe catalyst.The results showed that the combination of FIB patterning and secondary etching enabled the growth of highly aligned, highdensity CNT forest metamaterials. The improvement in the quality of single-walled CNTs(SWNTs), defined by the very high G/D peak ratio intensity of 10.47, demonstrated successful fine patterning of CNT forest for the first time. With a FIB patterning depth of 10 nm and a secondary etching of 0.5 nm, a minimum size of 150 nm of CNT forest metamaterials was achieved. The development of the FIB secondary etching method enabled for the first time, the fabrication of SWNT forest metamaterials for the optical and infrared regime, for future applications, e.g., in superlenses, antennas,or thermal metamaterials.
基金Funded by the National Natural Science Foundation for Young Scholars of China(No.51302073)the Hubei Provincial Key Laboratory of Green Materials for Light IndustryHubei University of Technology(No.202307B07)。
文摘We described a method for obtaining fluorine-free Ti_(3)C_(2)Cl_(2)MXene phases by melting copper in CuCl_(2)instead of aluminum in Ti_(3)AlC_(2).XRD results show that when molten salt CuCl_(2)etches Ti_(3)AlC_(2),it forms an intermediate product Ti_(3)CuC_(2),and then reacts with Ti_(3)CuC_(2)to obtain Ti_(3)C_(2)Cl_(2).The reaction of Ti_(3)AlC_(2)and CuCl_(2)at a temperature of 800℃for 2 h to obtain Ti_(3)C_(2)Cl_(2)with an optimal lamellar structure is shown in SEM results.The pseudopotential plane-wave(PP-PW)method is used to calculate on the electronic structure.The etching mechanism is investigated by the total energies of each substance.The chemical reaction of Ti_(3)AlC_(2)and CuCl_(2)will first become Ti_(3)CuC_(2)and Cu,and then become Ti_(3)C_(2)Cl_(2)during the Lewis acid etching process,which are consistent with the experimental results.
基金supported by the National Natural Science Foundation of China(No.92252201)the Fundamental Research Funds for the Central Universitiesthe Academic Excellence Foundation of Beihang University(BUAA)for PhD Students。
文摘Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of unsteady flows.To enhance computational efficiency,we propose the Implicit-Explicit Two-Step Runge-Kutta(IMEX-TSRK)time-stepping discretization methods for unsteady flows,and develop a novel adaptive algorithm that correctly partitions spatial regions to apply implicit or explicit methods.The novel adaptive IMEX-TSRK schemes effectively handle the numerical stiffness of the small grid size and improve computational efficiency.Compared to implicit and explicit Runge-Kutta(RK)schemes,the IMEX-TSRK methods achieve the same order of accuracy with fewer first derivative calculations.Numerical case tests demonstrate that the IMEX-TSRK methods maintain numerical stability while enhancing computational efficiency.Specifically,in high Reynolds number flows,the computational efficiency of the IMEX-TSRK methods surpasses that of explicit RK schemes by more than one order of magnitude,and that of implicit RK schemes several times over.
基金Funded by National Natural Science Foundation of China(No.50572121) Key Pre-research Foundation of Weapon and Equipment(No. 9140A27010206JB35)
文摘In-situ characterization of non-aqueous nano-dispersion systems（NANDS） by freeze-etching transmission electron microscope（FETEM） was reported.To improve just-for-once successive rate of specimen preparation and get good characterization results,an improving specimen preparation method of freezing etching was developed.Size,distribution and morphology of NANDS were directly visualized.Some information of particle dispersion feature and particle density can also be obtained.Reproductivity of the FETEM characterization is excellent.Comparing with laser scattering method,which is liable to give positive error especially for small size particle anchoring disperser,FETEM characterization can give more accurate measurement of particle size.Moreover,FETEM can give dispersion feature of nanoparticle in non-aqueous medium.
基金supported by the International Science and Technology Cooperation Program of Science and Technology Bureau of Changchun City,China(Grant No.12ZX68)
文摘Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was-140 K. The films＇ exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH3NH3Pb I（3-x）Clx films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices.
基金Project supported by the National Natural Science Foundation of China(Grant No.21606058)the Natural Science Foundation of Guangxi,China(Grant Nos.2017GXNSFBA198193 and 2017GXNSFBA198124)the Startup Foundation for Doctors of Guilin University of Technology(Grant No.GLUTQD2015008)。
文摘The adsorption of CO_(2) on MgAl layered double hydroxides(MgAl-LDHs) based adsorbents has been an effective way to capture CO_(2),however the adsorption capacity was hampered due to the pore structure and the dispersibility of adsorption active sites.To address the problem,we investigate the effect of intercalated anion and alkaline etching time on the structure,morphology and CO_(2) uptake performances of MgAl-LDHs.MgAl-LDHs are synthesized by the onepot hydrothermal method,followed by alkaline etching of NaOH,and characterized by x-ray diffraction,N_(2) adsorption,scanning electron microscopy and Fourier transform infrared spectroscopy.The CO_(2) adsorption tests of the samples are performed on a thermogravimetric analyzer,and the adsorption data are fitted by the first-order,pseudo-second-order and Elovich models,respectively.The results demonstrate that among the three intercalated samples,MgAl(Cl) using chloride salts as precursors possesses the highest adsorption capacity of CO_(2),owing to high crystallinity and porous structure,while MgAl(Ac) employing acetate salts as precursors displays the lowest CO_(2) uptake because of poor crystallinity,disorderly stacked structure and unsatisfactory pore structure.With regard to alkaline etching,the surface of the treated MgAl(Cl) is partly corroded,thus the specific surface area and pore volume increase,which is conducive to the exposure of adsorption active sites.Correspondingly,the adsorption performance of the alkaline-etched adsorbents is significantly improved,and MgAl(Cl)-6 has the highest CO_(2) uptake.With the alkaline etching time further increasing,the CO_(2) adsorption capacity of MgAl(Cl)-9 sharply decreases,mainly due to the collapse of pore structure and the fragmentized sheet-structure.Hence,the CO_(2) adsorption performance is greatly influenced by alkaline etching time,and appropriate alkaline etching time can facilitate the contact between CO_(2) molecules and the adsorbent.
文摘The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of remaining oil. Logging data are required to accomplish this. However, many such projects cannot be completed. Since the old study of remaining oil distribution could not be quantified efficiently, the ＂dynamic two-step method＂ is presented. Firstly, the water cut of every flow unit in one well at one time is calculated according to the comprehensive water cut of a single well at one time. Secondly, the remaining oil saturation of the flow unit of the well at one time is calculated based on the water cut of the flow unit at a given time. The results show that ＂dynamic two-step method＂ has characteristics of simplicity and convenience, and is especially suitable for the study of remaining oil distribution at high water-cut stage. The distribution of remaining oil presented banding and potato form, remaining oil was relatively concentrated in faultage neighborhood and imperfect well netting position, and the net thickness of the place was great. This proposal can provide an effective way to forecast remaining oil distribution and enhance oil recovery, especially applied at the high water-cut stage.
基金supported by the Natural Science Foundation of China(No.21174114)the Ministry of Education Plan for Yangtze River Scholar and Innovation Team Development(No.IRT1177)+2 种基金Scientific and Technical Plan Project of Gansu Province(No. 1204GKCA006)the Natural Science Foundation of Gansu Province (No.1010RJZA024)Scientific and Technical Innovation Project of Northwest Normal University(No.nwnu-kjcxgc-03-63)
文摘ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.
基金the financial support from China Aviation Science Foundation (04H52055).
文摘Process technology of multiple cylindrical micro-pins by wire-electrical discharge machining （wire-EDM） and electrochemical etching was presented. A row of rectangular micro-columns were machined by wire-EDM and then machined into cylindrical shape by electrochemical etching. However, the shape of the multiple electrodes and the consistent sizes of the electrodes row are not easy to be controlled. In the electrochemical process, the shape of the cathode electrode determines the current density distribution on the anode and so the forming of multiple electrodes. This paper proposes a finite element method （FEM） to accurately optimize the electrode profile. The microelectrodes row with uniformity diameters with size from hundreds micrometers to several decades could be fabricated, and mathematical model controlling the shape and diameter of multiple microelectrodes was provided. Furthermore, a good agreement between experimental and theoretical results was confirmed.
基金supported by the Program for Outstanding Young Scientific and Technological Personnel Training of Guizhou Province of China （No. 700968101） and the International Thermonuclear Experimental Reactor （ITER） Special Program of China （No. 2009GB104006）
文摘Molecular dynamics （MD） simulations were performed to investigate F＋ continuously bombarding SiC surfaces with energies of 100 eV at different incident angles at 300 K. The simulated results show that the steady-state uptake of F atoms increases with increasing incident angle. With the steady-state etching established, a Si-C-F reactive layer is formed. It is found that the etching yield of Si is greater than that of C. In the F-containing reaction layer, the SiF species is dominant with incident angles less than 30°. For all incident angles, the CF species is dominant over CF2 and CF3.
基金The Ministry of Education and Science, Republic of Serbai, Projects O171037 and III41011
文摘Refined control of etched profile in microelectronic devices during plasma etching process is one of the most important tasks of front-end and back-end microelectronic devices manufacturing technologies. A comprehensive simulation of etching profile evolution requires knowledge of the etching rates at all the points of the profile surface during the etching process. Electrons do not contribute directly to the material removal, but they are the source, together with positive ions, of the profile charging that has many negative consequences on the final outcome of the process especially in the case of insulating material etching. The ability to simulate feature charging was added to the 3D level set profile evolution simulator described earlier. The ion and electron fluxes were computed along the feature using Monte Carlo method. The surface potential profiles and electric field for the entire feature were generated by solving Laplace equation using finite elements method. Calculations were performed in the case of simplified model of Ar+/CF4 non-equilibrium plasma etching of SiO2.
基金supported by the Scientific Computing Research Innovation Team of Guangdong Province(no.2021KCXTD052)the Science and Technology Development Fund,Macao SAR(no.0096/2022/A,0151/2022/A)+3 种基金University of Macao(no.MYRG2020-00035-FST,MYRG2022-00076-FST)the Guangdong Key Construction Discipline Research Capacity Enhancement Project(no.2022ZDJS049)Technology Planning Project of Shaoguan(no.210716094530390)the ScienceFoundation of Shaoguan University(no.SZ2020KJ01).
文摘In this paper,a two-step iteration method is established which can be viewed as a generalization of the existing modulus-based methods for vertical linear complementarity problems given by He and Vong(Appl.Math.Lett.134:108344,2022).The convergence analysis of the proposed method is established,which can improve the existing results.Numerical examples show that the proposed method is efficient with the two-step technique.
基金supported by National Natural Science Foundation of China(11771393,11371320,11632015)Zhejiang Natural Science Foundation(LZ14A010002,LQ18A010008)Scientific Research Fund of Zhejiang Provincial Education Department(FX2016073)
文摘Under the assumption that the nonlinear operator has Lipschitz continuous divided differences for the first order,we obtain an estimate of the radius of the convergence ball for the two-step secant method.Moreover,we also provide an error estimate that matches the convergence order of the two-step secant method.At last,we give an application of the proposed theorem.
基金supported by the National Natural Science Foun-dation of China(Nos.52025028,52332008,52372214,52202273,and U22A20137)the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions.
文摘Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.
文摘The Adomian decomposition method (ADM) can be used to solve a wide range of problems and usually gets the solution in a series form. In this paper, we propose two-step Adomian Decomposition Method (TSAM) for nonlinear integro-differential equations that will facilitate the calculations. In this modification, compared to the standard Adomian decomposition method, the size of calculations was reduced. This modification also avoids computing Adomian polynomials. Numerical results are given to show the efficiency and performance of this method.
基金Project (2012CB722805) supported by the National Basic Research Program of ChinaProjects (50974083, 51174131) supported by the National Natural Science Foundation of China+1 种基金Project (50774112) supported by the Joint Fund of NSFC and Baosteel, ChinaProject(07QA4021) supported by the Shanghai "Phosphor" Science Foundation, China
文摘The accelerating factor （AF） method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics （HD） simulation, the relationship between the diffusion coefficient along the direction of z-axis which is normal to the Mg/Zn interface and temperature was investigated, and the AF＇s impact on the diffusion constant （D0） and activation energy （Q^＊） was studied. Then, two steps were taken to simulate the atomic diffusion process and the formation of new phases： one for acceleration and the other for equilibration. The results show that： the Arrhenius equation works well for the description of Dz with different accelerating factors; the AF has no effect on the diffusion constant Do in the case of no phase transition; and the relationship between Q＊ and Q conforms to Q^＊=Q/A. Then, the new Arrhenius equation for AFHD is successfully constructed as Dz=Doexp[-Q/（ART）]. Meanwhile, the authentic equilibrium conformations at any dynamic moment can only be reproduced by the equilibration simulation of the HD-simulated configurations. Key words： accelerating factor method; Arrhenius equation; two-steps scheme; Mg/Zn interface; hyperdynamic simulation
基金the National Defensive Preliminary Research Funds of China (No. 41312040404)
文摘In this paper, large-sized sapphire （Φ230×210 mm, 27.5 kg） was grown by SAPMAC method （sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center）. Dislocation peculiarity in large sapphire boule （0001） basal plane was investigated by chemical etchiing, scanning electron microscopy and X-ray topography method. The triangular dislocation etch pit measured is 7.6× 10^1-8.0×10^2 cm^2, in which relative high-density dislocations were generated at both initial and final stages of crystal growth. The analysis of single-crystal X-ray topography shows that there are no apparent sub-grain boundaries; the dislocation lines are isolated and straight. Finally, the origins of low-density dislocation in sapphire crystal are discussed by numerical analysis method.
文摘The paper aims to demonstrate the system of SANYI biogas power generation by two-step method which can produce methane and generate electricity effectively and stably.So it can be stable synchronization meshwork energy source establishment and provide references to develop an effective and stable project of producing methane and generating electricity.
