High hydrogen absorption and desorption rates are two significant index parameters for the applications of hydrogen storage tanks.The analysis of the hydrogen absorption and desorption behavior using the isothermal ki...High hydrogen absorption and desorption rates are two significant index parameters for the applications of hydrogen storage tanks.The analysis of the hydrogen absorption and desorption behavior using the isothermal kinetic models is an efficient way to investigate the kinetic mechanism.Multitudinous kinetic models have been developed to describe the kinetic process.However,these kinetic models were de-duced based on some assumptions and only appropriate for specific kinetic measurement methods and rate-controlling steps(RCSs),which sometimes lead to confusion during application.The kinetic analysis procedures using these kinetic models,as well as the key kinetic parameters,are unclear for many researchers who are unfamiliar with this field.These problems will prevent the kinetic models and their analysis methods from revealing the kinetic mechanism of hydrogen storage alloys.Thus,this review mainly focuses on the summarization of kinetic models based on different kinetic measurement methods and RCSs for the chemisorption,surface penetration,diffusion of hydrogen,nucleation and growth,and chemical reaction processes.The analysis procedures of kinetic experimental data are expounded,as well as the effects of temperature,hydrogen pressure,and particle radius.The applications of the kinetic models for different hydrogen storage alloys are also introduced.展开更多
The aim of this study was to develop a palatable donepezil(DP) orodispersible film(ODF)to facilitate the swallowing process and investigate the effect of cyclodextrin on tastemasking based on dynamic process and in vi...The aim of this study was to develop a palatable donepezil(DP) orodispersible film(ODF)to facilitate the swallowing process and investigate the effect of cyclodextrin on tastemasking based on dynamic process and in vivo drug absorption. Complexation of DP with hydroxypropyl-β-cyclodextrin(HP-β-CD) was applied to mask the bitter taste then the prepared complexes were incorporated into ODF using solvent casting method. The tastemasking efficiency was evaluated by e-tongue; meanwhile the pharmacokinetic behavior of DP/HP-β-CD ODF was investigated by in vivo study. Results showed the optimized film was more palatable than donepezil hydrochloride(DH) film and was bioequivalent with DH. The molecular mechanism was revealed by phase solubility study, Fourier-transform infrared spectrometer(FT-IR), Differential scanning calorimeter(DSC), X-ray diffraction(XRD) and molecular modeling. Taste-masking was attributed to the formation of DP/HP-β-CD which was due to moderate interaction between DP and HP-β-CD. The stability of DP/HP-β-CD was decreased because of the acid environment in stomach, which facilitated the absorption of DP. These results extended our understanding about the application of cyclodextrin complexation and provided guidance for the design of ODF especially for drugs with disgusting taste.展开更多
In this study,flower-like MoS2 constructed by nanosheets was synthesized by a simple hydrothermal method.The hydrothermal process was optimized and the effects of hydrothermal condition,including reaction temperature,...In this study,flower-like MoS2 constructed by nanosheets was synthesized by a simple hydrothermal method.The hydrothermal process was optimized and the effects of hydrothermal condition,including reaction temperature,reaction time and the ratio of Mo source to S source(Mo:S)in precursor,on microwave absorption performances and dielectric properties were investigated.Our results showed that when the reaction temperature was 180℃,the reaction time was 18 h,and the Mo:S was 1:3.5,the synthesized MoS2 had the best performance:Its minimum reflection loss could reach-55.78 dB,and the corresponding matching thickness was 2.30 mm with a wide effective bandwidth of 5.17 GHz.Further researches on the microwave absorption mechanism revealed that in addition to the destructive interference of electromagnetic waves,various polarization phenomena such as defect dipole polarization were the main reasons for microwave loss.We believe that MoS2 is a candidate for a practical microwave absorbent.展开更多
Alkanolamines are widely used in the purification of the sourgas sweetening process. During the sour gas absorption process, CO_2 significantly degrades the amine solvent and creates enormous problems for plant operat...Alkanolamines are widely used in the purification of the sourgas sweetening process. During the sour gas absorption process, CO_2 significantly degrades the amine solvent and creates enormous problems for plant operation. In this work, CO_2 induced degradation of aqueous diethanolamine(DEA) solution was conducted in a 1.25 L jacketed glass reactor that functioned as an absorber and stripper at atmospheric conditions. Pure CO_2 was bubbled through the reactor until the solution became saturated. In this study, the concentrations of DEA used were in the range of concentrations between 2 mol·L^(-1) and 4 mol·L^(-1). In the degradation experiment, six generic cycles were conducted for each run. Each cycle was configured with the absorption and desorption of carbon dioxide at 55 ℃ and 100 ℃, respectively. Samples were collected after a predetermined experimental time and analyzed by ion chromatography(IC) to identify unknown ionic degradation products(DGPs). In the IC analysis, three different columns were used for anion, cation and ion exclusion systems, which are Metrosep A Supp 5150/4.0, Metrosep C Supp 4 150/4.0 and Metrosep Organic Acids, respectively. The major identified DGPs of D01 DEA2 M, D02 DEA3 M, and D03 DEA4 M are nitrite, acetate and ammonium. Phosphate product was found in the degraded amine samples which might be due to the contamination of water or chromatographic system.展开更多
The co-removal of CO_(2)while removing SO_(2)and NOxfrom industrial flue gas has great potential of carbon emission reduction but related research is lacking.In this study,a wet scrubbing process with various urea sol...The co-removal of CO_(2)while removing SO_(2)and NOxfrom industrial flue gas has great potential of carbon emission reduction but related research is lacking.In this study,a wet scrubbing process with various urea solutions for desulfurization and denitrification was explored for the possibility of CO_(2)absorption.The results showed that the urea-additive solutions were efficient for NOxand SO_(2)abatement,but delivered<10%CO_(2)absorption efficiency.The addition of Ca(OH)_(2)dramatically enhanced the CO_(2)absorption,remained the desulfurization efficiency,unfortunately restricted the denitrification efficiency.Among various operating parameters,pH of solution played a determining role during the absorption.The contradictory pH demands of CO_(2)absorption and denitrification were observed and discussed in detail.A higher pH of solution than 10 was favorable for CO_(2)absorption,while the oxidizing of NO to NO_(2),NO_(2)^(-)or NO_(3)^(-)by NaClO_(2)was inhibited in this condition.When7<pH<10,it was favorable for the conversion and absorption of NO and NOx.However,the conversion of HCO_(3)^(-)to CO_(3)^(2-)was significantly inhibited,hence preventing the absorption of CO_(2).Large part of Ca(OH)_(2)became CaCO_(3)with a finer particle size,which covered the unreacted Ca(OH)_(2)surface after the reaction.Kinetic analysis showed that the CO_(2)absorption in urea-NaClO_(2)-Ca(OH)_(2)absorbent was controlled by chemical reaction in early stage,then by ash layer diffusion in later stage.展开更多
A mathematical model of the decarburization reaction zone was established for the Ruhrstahl–Heraeus (RH) forced oxygen blowing decarburization process by Matlab R2022b software. For the problem of inaccurate predicti...A mathematical model of the decarburization reaction zone was established for the Ruhrstahl–Heraeus (RH) forced oxygen blowing decarburization process by Matlab R2022b software. For the problem of inaccurate prediction due to the large variation range of oxygen absorption rate under different process conditions, we statistically analyzed the main factors affecting the oxygen absorption rate. The backpropagation neural network was used to train and predict the oxygen absorption rate and was used to calculate the RH decarburization reaction zone model. We designed and developed a mathematical modeling software with process control of decarburization in RH degasser, which can realize the change of operating process parameters in the dynamic prediction process. The optimized mathematical model has more than 95% of the furnaces whose absolute error in calculation of carbon content is within ± 5 × 10^(−6), more than 90% of the heats whose relative error in calculation of oxygen content is within ± 15%, and the average absolute error of calculation of oxygen content is 26.4 × 10^(−6). Finally, we studied the influence of oxygen blowing timing, oxygen blowing volume and initial oxygen content on the forced decarburization process.展开更多
The hydroxyapatite/polylactide biocomposites were prepared by absorption process in liquid phase. The method avoided many disadvantages, such as inaterfusion of chemical impurity substances, nonuniformity dispersal o...The hydroxyapatite/polylactide biocomposites were prepared by absorption process in liquid phase. The method avoided many disadvantages, such as inaterfusion of chemical impurity substances, nonuniformity dispersal of HA in PLA, low molecular weight of PLA . HA particles were uniformly dispersed in PLA matrix, and showed well ndhesion with PLA matrix. The biocomposites have the higher mechanical properties and suitable decomposable capability.展开更多
A regenerative absorption process for removal of SOx from FCC off-gas using LAS/ H2SO4 solution as absorbant was studied and pilot-plant experiments were carried out. A mass transfer- reaction model for the SO2 absorp...A regenerative absorption process for removal of SOx from FCC off-gas using LAS/ H2SO4 solution as absorbant was studied and pilot-plant experiments were carried out. A mass transfer- reaction model for the SO2 absorption process was established based on pilot-plant experiments, and the concentration distribution of components in the liquid film, and the partial pressure and mass transfer rate of SO2 along the height of the absorption tower, was calculated from this model. The numerical simulation results were compared with the experimental results and proved that the model can be used for describing the SO2 absorption process.展开更多
The dynamic model of LiBr absorption heat pump in shut-down process is established. The simulation results show good agreement with the experiments. The dynamic performance of high-pressure generator, low-pressure gen...The dynamic model of LiBr absorption heat pump in shut-down process is established. The simulation results show good agreement with the experiments. The dynamic performance of high-pressure generator, low-pressure generator and heat exchanger are analyzed in detail. The proper shut-down mode of the heat pump is presented,which, in consideration of solution parameters, has a great effect on the possibility of crystallization of some components.展开更多
Noble metal nanoparticles with localized surface plasmon resonance （LSPR） properties are widely used as optical sensors in biochemical detection and medical diagnosis. In this paper, we propose an effective determin...Noble metal nanoparticles with localized surface plasmon resonance （LSPR） properties are widely used as optical sensors in biochemical detection and medical diagnosis. In this paper, we propose an effective determination method to measure the LSPR absorption intensity of gold nanorods （GNRs）. A near-infrared （NIR） imaging system is established, and an NIR absorption image of the multiple samples of the colloidal GNRs is captured. Then, the LSPR absorption intensities of these samples are obtained by calculating the average grayscale of the target areas based on the NIR image processing technology. By using this method, the LSPR absorption intensities of the multiple samples are determined all at once, and their accuracy is as high as that obtained by using spectrophotometry. These results suggest that this method is an efficient multi-channel determination technique with high-throughput sensing applications.展开更多
The unreasonable nitrogen(N)supply and low productivity are the main factors restricting the sustainable development of processing tomatoes.In addition,the mechanism by which the N application strategy affects root gr...The unreasonable nitrogen(N)supply and low productivity are the main factors restricting the sustainable development of processing tomatoes.In addition,the mechanism by which the N application strategy affects root growth and nitrate distributions in processing tomatoes remains unclear.In this study,we applied four N application levels to a field(including 0(N0),200(N200),300(N300),and 400(N400)kg/hm^(2))based on the critical N absorption ratio at each growth stage(planting stage to flowering stage:22%;fruit setting stage:24%;red ripening stage:45%;and maturity stage:9%).The results indicated that N300 treatment significantly improved the aboveground dry matter(DM),yield,N uptake,and nitrogen use efficiency(NUE),while N400 treatment increased nitrate nitrogen(NO_(3)^(-)-N)residue in the 20–60 cm soil layer.Temporal variations of total root dry weight(TRDW)and total root length(TRL)showed a single-peak curve.Overall,N300 treatment improved the secondary root parameter of TRDW,while N400 treatment improved the secondary root parameter of TRL.The grey correlation coefficients indicated that root dry weight density(RDWD)in the surface soil(0–20 cm)had the strongest relationship with yield,whereas root length density(RLD)in the middle soil(20–40 cm)had a strong relationship with yield.The path model indicated that N uptake is a crucial factor affecting aboveground DM,TRDW,and yield.The above results indicate that N application levels based on critical N absorption improve the production of processing tomatoes by regulating N uptake and root distribution.Furthermore,the results of this study provide a theoretical basis for precise N management.展开更多
Mechanical properties and low cycle fatigue are two factors that must be considered in developin gnew type steel for shock absorption. Process capability and process control are significant factors in achieving the pu...Mechanical properties and low cycle fatigue are two factors that must be considered in developin gnew type steel for shock absorption. Process capability and process control are significant factors in achieving the purpose of research and development programs. Often-used evaluation methods failed to measure processyield and process centering ; so this paper uses Taguchi loss function as basis to establish an evaluation methodand the steps for assessing the quality of mechanical properties and process control of an iron and steel manu-facturer. The establishment of this method can serve the research and development and manufacturing industry and lay a foundation in enhancing its process control ability to select better manufacturing processes that are more reliable than decision making by using the other commonly used methods.展开更多
We report a readily and cheap method to build taper optical fiber-Er3+ doped microsphere platform to investigate upconversion fluorescence emission and down-conversion laser oscillation with low threshold pump power. ...We report a readily and cheap method to build taper optical fiber-Er3+ doped microsphere platform to investigate upconversion fluorescence emission and down-conversion laser oscillation with low threshold pump power. We demonstrate to dope Er3+ into silica microsphere surface by dipping a single-taper optical fiber into a certain concentration of erbium nitrate solution (Er(NO3)) , then dry it and use the electrical-arc of the optical fiber splicer to melt the tip of taper fiber to form the Er3+-doped silica microsphere due to surface tension induced. We also present a HF acid etching setup to fabricate low loss biconical optical taper fibers. We demonstrate the Er3+ doped silica microsphere triple photons and dual photons absorption process of up-conversion fluorescence emission and down-conversion laser oscillation spectra by using the optical tapered fiber to couple 976 nm/1534 nm pump light source.展开更多
[ Objective] This study aimed to optimize the conditions for purification of total flavones from litchi pericarp by macroporous absorption resin. E Method] The flavones adsorption rates and desorption rates of macropo...[ Objective] This study aimed to optimize the conditions for purification of total flavones from litchi pericarp by macroporous absorption resin. E Method] The flavones adsorption rates and desorption rates of macroporous absorption resins （AB-8, HPD-600, D101 ） were compared, and the technological parameters of D101 during the purification process were investigated. E Result] D101 macroporous absorption resin was ap- propriate for the purification of total flavonoids from litchi pericarp. The optimal technological conditions were selected .. the pH of sample solution was 5.0; concentration of sample solution was 4 mg/ml, with a volume of 2.5BV; 80% ethanol was used as elution solution, with a volume of 2.0BV. [ Condusion] The content of total flavones achieved 83% after separation by D101 macoporous absorption resin.展开更多
The potential application of microwave heating technology for processing the mixed rare earth concentrate was systematically investigated by analyzing the microwave absorption characteristics in this study. The comple...The potential application of microwave heating technology for processing the mixed rare earth concentrate was systematically investigated by analyzing the microwave absorption characteristics in this study. The complex permittivity was measured through resonant cavity perturbation method. The variations of permittivity, the loss factor, loss tangent and the penetration depth with the increasing temperature were investigated numerically. The results indicate that the permittivity increases as the temperature increases, and temperature has a pivotal effect on it. The mixed concentrate is high loss material at the temperature range from 600 to 800℃ according to theoretical analyses of loss tangent and penetration depth. The results of phase transition analysis prove that the variation of microwave absorption characteristics of mixed concentrate is caused by the changes of crystal and lattice structures.The reflectivity, loss factor and penetration depth of the mixed concentrate were also calculated, and the results indicate that processing the mixed concentrate by microwave heating is of high feasibility and industrial potential.展开更多
Decoupling the complicated vibrational-vibrational （V-V） coupling of a multimode vibrational relaxation remains a challenge for analyzing the sound relaxational absorption in multi-component gas mixtures. In our pre...Decoupling the complicated vibrational-vibrational （V-V） coupling of a multimode vibrational relaxation remains a challenge for analyzing the sound relaxational absorption in multi-component gas mixtures. In our previous work [Acta Phys. Sin. 61 174301 （2012）], an analytical model to predict the sound absorption from vibrational relaxation in a gas medium is proposed. In this paper, we develop the model to decouple the V-V coupled energy to each vibrationaltranslational deexcitation path, and analyze how the multimode relaxations form the peaks of sound absorption spectra in gas mixtures. We prove that a multimode relaxation is the sum of its decoupled single-relaxation processes, and only the decoupled process with a significant isochoric-molar-heat can be observed as an absorption peak. The decoupling model clarifies the essential processes behind the peaks in spectra arising from the multimode relaxations in multi-component gas mixtures. The simulation validates the proposed decoupling model.展开更多
In this study, a two-step heating process is introduced for transient liquid phase ( TLP) diffusion bonding fo r sound joints with T91 heat resistant steels. At first, a short-time higher temperature heating ...In this study, a two-step heating process is introduced for transient liquid phase ( TLP) diffusion bonding fo r sound joints with T91 heat resistant steels. At first, a short-time higher temperature heating step is addressed to melt the interlayer, followed by the second step to complete isothermal solidification at a low temperature. The most critical feature of our new method is producing a non-planar interface at the T9/ heat resistant steels joint. We propose a transitional liquid phase bonding of T91 heat resistant steels by this approach. Since joint microstructures have been studied, we tested the tensile strength to assess joint mechanical property. The result indicates that the solidified bond may contain a primary solid-solution, similar composition to the parent metal and free from precipitates. Joint tensile strength of the joint is not lower than parent materials. Joint bend's strengths are enhanced due to the higher metal-to-metal junction producing a non-planar bond lines. Nevertheless, the traditional transient liquid phase diffusion bonding produces planar ones. Bonding parameters of new process are 1 260 °C for 0. 5 min and 1 230 °C fo r 4 min.展开更多
Herein,a novel kind of high-entropy MAX phases,(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders were success-fully synthesized by a newly proposed two-step solid state reaction process.The oxidation experiments...Herein,a novel kind of high-entropy MAX phases,(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders were success-fully synthesized by a newly proposed two-step solid state reaction process.The oxidation experiments demonstrate that the oxidation products of Al_(2)Mo_(3)O_(12) and rutile TiO 2 are formed at about 600 and 800℃,respectively.Besides,the dielectric and electromagnetic(EM)wave absorption properties of(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders and those after oxidation at different temperatures were also exam-ined.The results show that the as-synthesized(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders possess excellent EM wave absorption performances with the minimum reflection loss(RL)of-45.80 dB(at 1.7 mm thickness)and the maximum effective absorption bandwidth(E AB)of 3.6 GHz(at 1.5 mm thickness).After oxidation at 400-800℃,due to the coupling of conductivity loss and polarization loss,(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders can retain good EM wave absorption properties in a certain frequency range.In this paper,the effects of oxidation on EM wave absorption properties of high-entropy MAX phases were systematically investigated for the first time.This work manifests that high-entropy MAX phases are promising EM wave absorbing candidates and can maintain good EM wave absorption performances after oxidation.展开更多
Whereas hollow composites present some superiorities like abundant micro interfaces,outstanding impedance matching as the responses of electromagnetic wave(EMW),but versatile designs including crystal transformation,h...Whereas hollow composites present some superiorities like abundant micro interfaces,outstanding impedance matching as the responses of electromagnetic wave(EMW),but versatile designs including crystal transformation,heterogeneous structures and magnetic exchange coupling to further contribution are even not designed or stressed together in previous literatures.In this article,rational design on the hollow CoFe_(2)O_(4)/CoFe@C architecture has been conducted by a sequential process of self-sacrifice by combustion,in-suit polymerization and calcination.Results of morphology observation exhibit that heterogeneous CoFe_(2)O_(4)/CoFe@C composites were generated via crystal transformation from CoFe_(2)O_(4) to CoFe alloys with encapsulated carbon,together with ultimate growth of crystal particles.As for three carbon-based architectures,relatively low-graphitization carbon layers are favorable for enhancing impedance matching and polarization relaxation,but suppressing the conductive loss essentially.Moderate carbon content endows sample S2 with the maximum magnetic saturation(Ms)of 152.4 emu g^(-1).The optimized RL of sample S3 is up to-51 dB with 30 wt%loading,and the effective absorption band(EAB)is of 5.9 GHz at the thickness of 2.17 mm,while 6.0 GHz can be reached at 2.5 mm.Therefore,this hollow multi-interfaces design definitely shed light on novel structure for new excellent absorbers.展开更多
Recovering waste heat from industrial processes is bene ficial in order to reduce the primary energy demands and heat pumps can be used to this purpose.Absorption heat pumps are energy-saving and environment-friendly ...Recovering waste heat from industrial processes is bene ficial in order to reduce the primary energy demands and heat pumps can be used to this purpose.Absorption heat pumps are energy-saving and environment-friendly because use working fluids that do not cause ozone depletion and can reduce the global warming emissions.The hybrid heat pump processes combine the conventional vapor-compression and the absorption heat pump cycles.Studies about the simulations and modeling of hybrid heat pumps are few in literature.In this research a mathematical model for single effect absorption and hybrid heat pump is carried out with Chem Cad?6.0.1.LiBr–H_2O is used as working fluid while electrolytic NRTL and electrolytes latent heat are used as thermodynamic model due to the better results.Binary parameters of activity coef ficients are regressed from experimental vapor pressure data while default constants are used for the solubility expressions.A design of heat pumps is developed and a new modeling of generator is analyzed.The coef ficient of performance of absorption heat pump and hybrid heat pump is equal to 0.7 and 0.83 respectively.For absorption heat pump a sensitivity analysis is carried out to evaluate the effect of temperature and pressure generator,the concentration of Li–Br solution on coef ficient of performance,cooling capacity and working fluid temperature.For hybrid heat pump,the different coef ficients of performance,the primary energy ratio,the generator heat,and the compressor power are analyzed for different values of compressor proportion.Results show that comparing the two systems the hybrid pump allows to save more primary energy,costs and carbon dioxide emissions with respect to absorption heat pump with the increasing of compressor proportion parameter.Future researches should focus on the construction of this heat pumps integrated in chemical processes as a biogas plant or trigeneration systems.展开更多
基金This work was financially supported by the Chongqing Special Key Project of Technology Innovation and Applica-tion Development,China(No.cstc2019jscx-dxwtB0029)the National Natural Science Foundation of China(Nos.51871143 and U2102212)+1 种基金the Science and Technology Committee of Shanghai,China(No.19010500400)the Shanghai Rising-Star Program(No.21QA1403200).
文摘High hydrogen absorption and desorption rates are two significant index parameters for the applications of hydrogen storage tanks.The analysis of the hydrogen absorption and desorption behavior using the isothermal kinetic models is an efficient way to investigate the kinetic mechanism.Multitudinous kinetic models have been developed to describe the kinetic process.However,these kinetic models were de-duced based on some assumptions and only appropriate for specific kinetic measurement methods and rate-controlling steps(RCSs),which sometimes lead to confusion during application.The kinetic analysis procedures using these kinetic models,as well as the key kinetic parameters,are unclear for many researchers who are unfamiliar with this field.These problems will prevent the kinetic models and their analysis methods from revealing the kinetic mechanism of hydrogen storage alloys.Thus,this review mainly focuses on the summarization of kinetic models based on different kinetic measurement methods and RCSs for the chemisorption,surface penetration,diffusion of hydrogen,nucleation and growth,and chemical reaction processes.The analysis procedures of kinetic experimental data are expounded,as well as the effects of temperature,hydrogen pressure,and particle radius.The applications of the kinetic models for different hydrogen storage alloys are also introduced.
文摘The aim of this study was to develop a palatable donepezil(DP) orodispersible film(ODF)to facilitate the swallowing process and investigate the effect of cyclodextrin on tastemasking based on dynamic process and in vivo drug absorption. Complexation of DP with hydroxypropyl-β-cyclodextrin(HP-β-CD) was applied to mask the bitter taste then the prepared complexes were incorporated into ODF using solvent casting method. The tastemasking efficiency was evaluated by e-tongue; meanwhile the pharmacokinetic behavior of DP/HP-β-CD ODF was investigated by in vivo study. Results showed the optimized film was more palatable than donepezil hydrochloride(DH) film and was bioequivalent with DH. The molecular mechanism was revealed by phase solubility study, Fourier-transform infrared spectrometer(FT-IR), Differential scanning calorimeter(DSC), X-ray diffraction(XRD) and molecular modeling. Taste-masking was attributed to the formation of DP/HP-β-CD which was due to moderate interaction between DP and HP-β-CD. The stability of DP/HP-β-CD was decreased because of the acid environment in stomach, which facilitated the absorption of DP. These results extended our understanding about the application of cyclodextrin complexation and provided guidance for the design of ODF especially for drugs with disgusting taste.
基金financially supported by the National Natural Science Foundation of China(No.21403298)。
文摘In this study,flower-like MoS2 constructed by nanosheets was synthesized by a simple hydrothermal method.The hydrothermal process was optimized and the effects of hydrothermal condition,including reaction temperature,reaction time and the ratio of Mo source to S source(Mo:S)in precursor,on microwave absorption performances and dielectric properties were investigated.Our results showed that when the reaction temperature was 180℃,the reaction time was 18 h,and the Mo:S was 1:3.5,the synthesized MoS2 had the best performance:Its minimum reflection loss could reach-55.78 dB,and the corresponding matching thickness was 2.30 mm with a wide effective bandwidth of 5.17 GHz.Further researches on the microwave absorption mechanism revealed that in addition to the destructive interference of electromagnetic waves,various polarization phenomena such as defect dipole polarization were the main reasons for microwave loss.We believe that MoS2 is a candidate for a practical microwave absorbent.
基金the Ministry of Science,Technology and Innovation,Malaysia(MOSTI),for funding the project:RG003/09AET as well as the University of Malaya for allowing full access to several key laboratories to perform experimental work
文摘Alkanolamines are widely used in the purification of the sourgas sweetening process. During the sour gas absorption process, CO_2 significantly degrades the amine solvent and creates enormous problems for plant operation. In this work, CO_2 induced degradation of aqueous diethanolamine(DEA) solution was conducted in a 1.25 L jacketed glass reactor that functioned as an absorber and stripper at atmospheric conditions. Pure CO_2 was bubbled through the reactor until the solution became saturated. In this study, the concentrations of DEA used were in the range of concentrations between 2 mol·L^(-1) and 4 mol·L^(-1). In the degradation experiment, six generic cycles were conducted for each run. Each cycle was configured with the absorption and desorption of carbon dioxide at 55 ℃ and 100 ℃, respectively. Samples were collected after a predetermined experimental time and analyzed by ion chromatography(IC) to identify unknown ionic degradation products(DGPs). In the IC analysis, three different columns were used for anion, cation and ion exclusion systems, which are Metrosep A Supp 5150/4.0, Metrosep C Supp 4 150/4.0 and Metrosep Organic Acids, respectively. The major identified DGPs of D01 DEA2 M, D02 DEA3 M, and D03 DEA4 M are nitrite, acetate and ammonium. Phosphate product was found in the degraded amine samples which might be due to the contamination of water or chromatographic system.
基金supported by the National Key Research and Development Plan of China (Nos.2019YFC0214300 and 2020YFF0408886)the Central Public-interest Scientific Institution Basal Research Fund of China (Nos.PM-zx703-202104059,PM-zx703-202104-087,and PM-zx703-202204-159)the Project of Science and Technology Program of Guangzhou,China (No.202102020135)。
文摘The co-removal of CO_(2)while removing SO_(2)and NOxfrom industrial flue gas has great potential of carbon emission reduction but related research is lacking.In this study,a wet scrubbing process with various urea solutions for desulfurization and denitrification was explored for the possibility of CO_(2)absorption.The results showed that the urea-additive solutions were efficient for NOxand SO_(2)abatement,but delivered<10%CO_(2)absorption efficiency.The addition of Ca(OH)_(2)dramatically enhanced the CO_(2)absorption,remained the desulfurization efficiency,unfortunately restricted the denitrification efficiency.Among various operating parameters,pH of solution played a determining role during the absorption.The contradictory pH demands of CO_(2)absorption and denitrification were observed and discussed in detail.A higher pH of solution than 10 was favorable for CO_(2)absorption,while the oxidizing of NO to NO_(2),NO_(2)^(-)or NO_(3)^(-)by NaClO_(2)was inhibited in this condition.When7<pH<10,it was favorable for the conversion and absorption of NO and NOx.However,the conversion of HCO_(3)^(-)to CO_(3)^(2-)was significantly inhibited,hence preventing the absorption of CO_(2).Large part of Ca(OH)_(2)became CaCO_(3)with a finer particle size,which covered the unreacted Ca(OH)_(2)surface after the reaction.Kinetic analysis showed that the CO_(2)absorption in urea-NaClO_(2)-Ca(OH)_(2)absorbent was controlled by chemical reaction in early stage,then by ash layer diffusion in later stage.
基金supported by the Central Government Guides Local Science and Technology Development Foundation(No.2023JH6/100100046)the Project funded by China Postdoctoral Science Foundation(No.2023M730230).
文摘A mathematical model of the decarburization reaction zone was established for the Ruhrstahl–Heraeus (RH) forced oxygen blowing decarburization process by Matlab R2022b software. For the problem of inaccurate prediction due to the large variation range of oxygen absorption rate under different process conditions, we statistically analyzed the main factors affecting the oxygen absorption rate. The backpropagation neural network was used to train and predict the oxygen absorption rate and was used to calculate the RH decarburization reaction zone model. We designed and developed a mathematical modeling software with process control of decarburization in RH degasser, which can realize the change of operating process parameters in the dynamic prediction process. The optimized mathematical model has more than 95% of the furnaces whose absolute error in calculation of carbon content is within ± 5 × 10^(−6), more than 90% of the heats whose relative error in calculation of oxygen content is within ± 15%, and the average absolute error of calculation of oxygen content is 26.4 × 10^(−6). Finally, we studied the influence of oxygen blowing timing, oxygen blowing volume and initial oxygen content on the forced decarburization process.
文摘The hydroxyapatite/polylactide biocomposites were prepared by absorption process in liquid phase. The method avoided many disadvantages, such as inaterfusion of chemical impurity substances, nonuniformity dispersal of HA in PLA, low molecular weight of PLA . HA particles were uniformly dispersed in PLA matrix, and showed well ndhesion with PLA matrix. The biocomposites have the higher mechanical properties and suitable decomposable capability.
文摘A regenerative absorption process for removal of SOx from FCC off-gas using LAS/ H2SO4 solution as absorbant was studied and pilot-plant experiments were carried out. A mass transfer- reaction model for the SO2 absorption process was established based on pilot-plant experiments, and the concentration distribution of components in the liquid film, and the partial pressure and mass transfer rate of SO2 along the height of the absorption tower, was calculated from this model. The numerical simulation results were compared with the experimental results and proved that the model can be used for describing the SO2 absorption process.
基金This paper is supported by thy UTC RongHong foundation
文摘The dynamic model of LiBr absorption heat pump in shut-down process is established. The simulation results show good agreement with the experiments. The dynamic performance of high-pressure generator, low-pressure generator and heat exchanger are analyzed in detail. The proper shut-down mode of the heat pump is presented,which, in consideration of solution parameters, has a great effect on the possibility of crystallization of some components.
基金Supported by the Natural Science Foundation of Jiangsu Province(SBK201240182)
文摘Noble metal nanoparticles with localized surface plasmon resonance （LSPR） properties are widely used as optical sensors in biochemical detection and medical diagnosis. In this paper, we propose an effective determination method to measure the LSPR absorption intensity of gold nanorods （GNRs）. A near-infrared （NIR） imaging system is established, and an NIR absorption image of the multiple samples of the colloidal GNRs is captured. Then, the LSPR absorption intensities of these samples are obtained by calculating the average grayscale of the target areas based on the NIR image processing technology. By using this method, the LSPR absorption intensities of the multiple samples are determined all at once, and their accuracy is as high as that obtained by using spectrophotometry. These results suggest that this method is an efficient multi-channel determination technique with high-throughput sensing applications.
基金supported by the National Natural Science Foundation of China (42077011).
文摘The unreasonable nitrogen(N)supply and low productivity are the main factors restricting the sustainable development of processing tomatoes.In addition,the mechanism by which the N application strategy affects root growth and nitrate distributions in processing tomatoes remains unclear.In this study,we applied four N application levels to a field(including 0(N0),200(N200),300(N300),and 400(N400)kg/hm^(2))based on the critical N absorption ratio at each growth stage(planting stage to flowering stage:22%;fruit setting stage:24%;red ripening stage:45%;and maturity stage:9%).The results indicated that N300 treatment significantly improved the aboveground dry matter(DM),yield,N uptake,and nitrogen use efficiency(NUE),while N400 treatment increased nitrate nitrogen(NO_(3)^(-)-N)residue in the 20–60 cm soil layer.Temporal variations of total root dry weight(TRDW)and total root length(TRL)showed a single-peak curve.Overall,N300 treatment improved the secondary root parameter of TRDW,while N400 treatment improved the secondary root parameter of TRL.The grey correlation coefficients indicated that root dry weight density(RDWD)in the surface soil(0–20 cm)had the strongest relationship with yield,whereas root length density(RLD)in the middle soil(20–40 cm)had a strong relationship with yield.The path model indicated that N uptake is a crucial factor affecting aboveground DM,TRDW,and yield.The above results indicate that N application levels based on critical N absorption improve the production of processing tomatoes by regulating N uptake and root distribution.Furthermore,the results of this study provide a theoretical basis for precise N management.
文摘Mechanical properties and low cycle fatigue are two factors that must be considered in developin gnew type steel for shock absorption. Process capability and process control are significant factors in achieving the purpose of research and development programs. Often-used evaluation methods failed to measure processyield and process centering ; so this paper uses Taguchi loss function as basis to establish an evaluation methodand the steps for assessing the quality of mechanical properties and process control of an iron and steel manu-facturer. The establishment of this method can serve the research and development and manufacturing industry and lay a foundation in enhancing its process control ability to select better manufacturing processes that are more reliable than decision making by using the other commonly used methods.
文摘We report a readily and cheap method to build taper optical fiber-Er3+ doped microsphere platform to investigate upconversion fluorescence emission and down-conversion laser oscillation with low threshold pump power. We demonstrate to dope Er3+ into silica microsphere surface by dipping a single-taper optical fiber into a certain concentration of erbium nitrate solution (Er(NO3)) , then dry it and use the electrical-arc of the optical fiber splicer to melt the tip of taper fiber to form the Er3+-doped silica microsphere due to surface tension induced. We also present a HF acid etching setup to fabricate low loss biconical optical taper fibers. We demonstrate the Er3+ doped silica microsphere triple photons and dual photons absorption process of up-conversion fluorescence emission and down-conversion laser oscillation spectra by using the optical tapered fiber to couple 976 nm/1534 nm pump light source.
基金Supported by Key Project of Science and Technology of Luzhou City(651)
文摘[ Objective] This study aimed to optimize the conditions for purification of total flavones from litchi pericarp by macroporous absorption resin. E Method] The flavones adsorption rates and desorption rates of macroporous absorption resins （AB-8, HPD-600, D101 ） were compared, and the technological parameters of D101 during the purification process were investigated. E Result] D101 macroporous absorption resin was ap- propriate for the purification of total flavonoids from litchi pericarp. The optimal technological conditions were selected .. the pH of sample solution was 5.0; concentration of sample solution was 4 mg/ml, with a volume of 2.5BV; 80% ethanol was used as elution solution, with a volume of 2.0BV. [ Condusion] The content of total flavones achieved 83% after separation by D101 macoporous absorption resin.
基金Project supported by the National Basic Research Program of China(2012CBA01205)the Basic Research Universities Special Fund Operations(N162505002)
文摘The potential application of microwave heating technology for processing the mixed rare earth concentrate was systematically investigated by analyzing the microwave absorption characteristics in this study. The complex permittivity was measured through resonant cavity perturbation method. The variations of permittivity, the loss factor, loss tangent and the penetration depth with the increasing temperature were investigated numerically. The results indicate that the permittivity increases as the temperature increases, and temperature has a pivotal effect on it. The mixed concentrate is high loss material at the temperature range from 600 to 800℃ according to theoretical analyses of loss tangent and penetration depth. The results of phase transition analysis prove that the variation of microwave absorption characteristics of mixed concentrate is caused by the changes of crystal and lattice structures.The reflectivity, loss factor and penetration depth of the mixed concentrate were also calculated, and the results indicate that processing the mixed concentrate by microwave heating is of high feasibility and industrial potential.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60971009 and 61001011)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20090142110019)+1 种基金the Natural Science Foundation of Hubei Province, China (Grant No. 2010CDB02701)the Fundamental Research Funds for the Central Universities, China (Grant No. 2012QN083)
文摘Decoupling the complicated vibrational-vibrational （V-V） coupling of a multimode vibrational relaxation remains a challenge for analyzing the sound relaxational absorption in multi-component gas mixtures. In our previous work [Acta Phys. Sin. 61 174301 （2012）], an analytical model to predict the sound absorption from vibrational relaxation in a gas medium is proposed. In this paper, we develop the model to decouple the V-V coupled energy to each vibrationaltranslational deexcitation path, and analyze how the multimode relaxations form the peaks of sound absorption spectra in gas mixtures. We prove that a multimode relaxation is the sum of its decoupled single-relaxation processes, and only the decoupled process with a significant isochoric-molar-heat can be observed as an absorption peak. The decoupling model clarifies the essential processes behind the peaks in spectra arising from the multimode relaxations in multi-component gas mixtures. The simulation validates the proposed decoupling model.
基金supported by the Natural Science Foundation of Henan Province(Grant No.152107000047)
文摘In this study, a two-step heating process is introduced for transient liquid phase ( TLP) diffusion bonding fo r sound joints with T91 heat resistant steels. At first, a short-time higher temperature heating step is addressed to melt the interlayer, followed by the second step to complete isothermal solidification at a low temperature. The most critical feature of our new method is producing a non-planar interface at the T9/ heat resistant steels joint. We propose a transitional liquid phase bonding of T91 heat resistant steels by this approach. Since joint microstructures have been studied, we tested the tensile strength to assess joint mechanical property. The result indicates that the solidified bond may contain a primary solid-solution, similar composition to the parent metal and free from precipitates. Joint tensile strength of the joint is not lower than parent materials. Joint bend's strengths are enhanced due to the higher metal-to-metal junction producing a non-planar bond lines. Nevertheless, the traditional transient liquid phase diffusion bonding produces planar ones. Bonding parameters of new process are 1 260 °C for 0. 5 min and 1 230 °C fo r 4 min.
基金This work was financially supported by the Major Basic Re-search Projects of Shandong Natural Science Foundation(No.ZR2018ZB0104)the Science and Technology Development Project of Shandong Province(Nos.2016GGX102003,2017GGX20105)the Natural Science Foundation of Shandong Province(No.ZR2017BEM032).
文摘Herein,a novel kind of high-entropy MAX phases,(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders were success-fully synthesized by a newly proposed two-step solid state reaction process.The oxidation experiments demonstrate that the oxidation products of Al_(2)Mo_(3)O_(12) and rutile TiO 2 are formed at about 600 and 800℃,respectively.Besides,the dielectric and electromagnetic(EM)wave absorption properties of(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders and those after oxidation at different temperatures were also exam-ined.The results show that the as-synthesized(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders possess excellent EM wave absorption performances with the minimum reflection loss(RL)of-45.80 dB(at 1.7 mm thickness)and the maximum effective absorption bandwidth(E AB)of 3.6 GHz(at 1.5 mm thickness).After oxidation at 400-800℃,due to the coupling of conductivity loss and polarization loss,(Mo_(0.25)Cr_(0.25)Ti_(0.25)V_(0.25))_(3)AlC_(2)powders can retain good EM wave absorption properties in a certain frequency range.In this paper,the effects of oxidation on EM wave absorption properties of high-entropy MAX phases were systematically investigated for the first time.This work manifests that high-entropy MAX phases are promising EM wave absorbing candidates and can maintain good EM wave absorption performances after oxidation.
基金This work was supported by the National Natural Science Foundation of China(No.51622106)the Liao Ning Revitalization Talents Program(No.XLYC1807076)。
文摘Whereas hollow composites present some superiorities like abundant micro interfaces,outstanding impedance matching as the responses of electromagnetic wave(EMW),but versatile designs including crystal transformation,heterogeneous structures and magnetic exchange coupling to further contribution are even not designed or stressed together in previous literatures.In this article,rational design on the hollow CoFe_(2)O_(4)/CoFe@C architecture has been conducted by a sequential process of self-sacrifice by combustion,in-suit polymerization and calcination.Results of morphology observation exhibit that heterogeneous CoFe_(2)O_(4)/CoFe@C composites were generated via crystal transformation from CoFe_(2)O_(4) to CoFe alloys with encapsulated carbon,together with ultimate growth of crystal particles.As for three carbon-based architectures,relatively low-graphitization carbon layers are favorable for enhancing impedance matching and polarization relaxation,but suppressing the conductive loss essentially.Moderate carbon content endows sample S2 with the maximum magnetic saturation(Ms)of 152.4 emu g^(-1).The optimized RL of sample S3 is up to-51 dB with 30 wt%loading,and the effective absorption band(EAB)is of 5.9 GHz at the thickness of 2.17 mm,while 6.0 GHz can be reached at 2.5 mm.Therefore,this hollow multi-interfaces design definitely shed light on novel structure for new excellent absorbers.
文摘Recovering waste heat from industrial processes is bene ficial in order to reduce the primary energy demands and heat pumps can be used to this purpose.Absorption heat pumps are energy-saving and environment-friendly because use working fluids that do not cause ozone depletion and can reduce the global warming emissions.The hybrid heat pump processes combine the conventional vapor-compression and the absorption heat pump cycles.Studies about the simulations and modeling of hybrid heat pumps are few in literature.In this research a mathematical model for single effect absorption and hybrid heat pump is carried out with Chem Cad?6.0.1.LiBr–H_2O is used as working fluid while electrolytic NRTL and electrolytes latent heat are used as thermodynamic model due to the better results.Binary parameters of activity coef ficients are regressed from experimental vapor pressure data while default constants are used for the solubility expressions.A design of heat pumps is developed and a new modeling of generator is analyzed.The coef ficient of performance of absorption heat pump and hybrid heat pump is equal to 0.7 and 0.83 respectively.For absorption heat pump a sensitivity analysis is carried out to evaluate the effect of temperature and pressure generator,the concentration of Li–Br solution on coef ficient of performance,cooling capacity and working fluid temperature.For hybrid heat pump,the different coef ficients of performance,the primary energy ratio,the generator heat,and the compressor power are analyzed for different values of compressor proportion.Results show that comparing the two systems the hybrid pump allows to save more primary energy,costs and carbon dioxide emissions with respect to absorption heat pump with the increasing of compressor proportion parameter.Future researches should focus on the construction of this heat pumps integrated in chemical processes as a biogas plant or trigeneration systems.
