The features of a quasi-two-dimensional( quasi-2D) model for simulating two-phase water hammer flows with vaporous cavity in a pipe are investigated. The quasi-2D model with discrete vaporous cavity in the pipe is pro...The features of a quasi-two-dimensional( quasi-2D) model for simulating two-phase water hammer flows with vaporous cavity in a pipe are investigated. The quasi-2D model with discrete vaporous cavity in the pipe is proposed in this paper. This model uses the quasi-2D model for pure liquid zone and one-dimensional( 1D) discrete vapor cavity model for vaporous cavity zone. The quasi-2D model solves two-dimensional equations for both axial and radial velocities and 1D equations for both pressure head and discharge by the method of characteristics. The 1D discrete vapor cavity model is used to simulate the vaporous cavity occurred when the pressure in the local pipe is lower than the vapor pressure of the liquid. The proposed model is used to simulate two-phase water flows caused by the rapid downstream valve closure in a reservoir-pipe-valve system.The results obtained by the proposed model are compared with those by the corresponding 1D model and the experimental ones provided by the literature,respectively. The comparison shows that the maximum pressure heads simulated by the proposed model are more accurate than those by the corresponding 1D model.展开更多
A vertical (laterally averaged) two-dimensional hydrodynamic model is developed for tides, tidal current, and salinity in a branched estuarine system. The governing equations are solved with the hydrostatic pressure d...A vertical (laterally averaged) two-dimensional hydrodynamic model is developed for tides, tidal current, and salinity in a branched estuarine system. The governing equations are solved with the hydrostatic pressure distribution assumption and the Boussinesq approximation. An explicit scheme is employed to solve the continuity equations. The momentum and mass balance equations are solved implicitly in the Cartesian coordinate system. The tributaries are governed by the same dynamic equations. A control volume at the junctions is designed to conserve mass and volume transport in the finite difference schemes, based on the physical principle of continuum medium of fluid. Predictions by the developed model are compared with the analytic solutions of steady wind-driven circulatory flow and tidal flow. The model results for the velocities and water surface elevations coincide with analytic results. The model is then applied to the Tanshui River estuarine system. Detailed model calibration and verification have been conducted with measured water surface elevations, tidal current, and salinity distributions. The overall performance of the model is in qualitative agreement with the available field data. The calibrated and verified numerical model has been used to quantify the tidal prism and flushing rate in the Tanshui River-Tahan Stream, Hsintien Stream, and Keelung River.展开更多
Self-limiting oxidation of nanowires has been previously described as a reaction- or diffusion-controlled process. In this letter, the concept of finite reactive region is introduced into a diffusion-controlled model,...Self-limiting oxidation of nanowires has been previously described as a reaction- or diffusion-controlled process. In this letter, the concept of finite reactive region is introduced into a diffusion-controlled model, based upon which a two-dimensional cylindrical kinetics model is developed for the oxidation of silicon nanowires and is extended for tungsten. In the model, diffusivity is affected by the expansive oxidation reaction induced stress. The dependency of the oxidation upon curvature and temperature is modeled. Good agreement between the model predictions and available experimental data is obtained. The de- veloped model serves to quantify the oxidation in two-dimensional nanostructures and is expected to facilitate their fabrication via thermal oxidation techniques.展开更多
A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation f...A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.展开更多
This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both th...This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both the control action and the learning action in RCS. Then, through constructing a 2D state feedback controller, the design problem of the RCS is converted to the design problem of a 2D system. Then, using 2D system theory and linear matrix inequality （LMI） method, stability criterion is derived for the system without and with uncertainties, respectively. Parameters of the system can be determined by solving the LMI of the stability criterion. Finally, numerical simulations validate the effectiveness of the proposed method.展开更多
In the present paper,the two-dimensional comprehensive model,which integrates the temperature model developed by the authors using finite difference methods and microstructural evolution model,has been developed.By us...In the present paper,the two-dimensional comprehensive model,which integrates the temperature model developed by the authors using finite difference methods and microstructural evolution model,has been developed.By using different microstructural evolution equations developed by Sellars,Senuma et al.and Easka et al.,the comparison studies have been made,which present that (1) the calculated γ-grain sizes show good agreements with the measured;(2) these equations show consistencies at the end of finishing stands.展开更多
In this paper, we are interested by the dissolution of NAPL (Non-Aqueous Phase Liquid) contaminants in heterogeneous soils or aquifers. The volume averaging technique is applied to 2D systems with Darcy-scale heteroge...In this paper, we are interested by the dissolution of NAPL (Non-Aqueous Phase Liquid) contaminants in heterogeneous soils or aquifers. The volume averaging technique is applied to 2D systems with Darcy-scale heterogeneities. A large-scale model is derived from a Darcy-scale dissolution model in the case of small and large Damkholer numbers, i.e., for smooth or sharp dissolution fronts. The resulting models in both cases have the mathematical structure of a non-equilibrium dissolution model. It is shown how to calculate the resulting mass exchange and relative permeability terms from the Darcy-scale heterogeneities and other fluid properties. One of the important finding is that the obtained values have a very different behavior compared to the Darcy-scale usual correlations. The large scale correlations are also very different between the two limit cases. The resulting large-scale models are compared favorably to Darcy-scale direct simulations.展开更多
Vehicle electrification,an important method for reducing carbon emissions from road transport,has been promoted globally.In this study,we analyze how individuals adapt to this transition in transportation and its subs...Vehicle electrification,an important method for reducing carbon emissions from road transport,has been promoted globally.In this study,we analyze how individuals adapt to this transition in transportation and its subsequent impact on urban structure.Considering the varying travel costs associated with electric and fuel vehicles,we analyze the dynamic choices of households concerning house locations and vehicle types in a two-dimensional monocentric city.A spatial equilibrium is developed to model the interactions between urban density,vehicle age and vehicle type.An agent-based microeconomic residential choice model dynamically coupled with a house rent market is developed to analyze household choices of home locations and vehicle energy types,considering vehicle ages and competition for public charging piles.Key findings from our proposed models show that the proportion of electric vehicles(EVs)peaks at over 50%by the end of the first scrappage period,accompanied by more than a 40%increase in commuting distance and time compared to the scenario with only fuel vehicles.Simulation experiments on a theoretical grid indicate that heterogeneity-induced residential segregation can lead to urban sprawl and congestion.Furthermore,households with EVs tend to be located farther from the city center,and an increase in EV ownership contributes to urban expansion.Our study provides insights into how individuals adapt to EV transitions and the resulting impacts on home locations and land use changes.It offers a novel perspective on the dynamic interactions between EV adoption and urban development.展开更多
Rip currents are a significant threat to swimmers worldwide,responsible for numerous drowning incidents each year.In Vietnam,Bai Dai Beach in Cam Ranh Bay,Khanh Hoa Province,has experienced an increase in drowning eve...Rip currents are a significant threat to swimmers worldwide,responsible for numerous drowning incidents each year.In Vietnam,Bai Dai Beach in Cam Ranh Bay,Khanh Hoa Province,has experienced an increase in drowning events due to rip currents in recent years.To address this issue,a comprehensive study was conducted based on developing a depth-averaged 2D hydrodynamic model to simulate rip currents in the Bai Dai-Cam Ranh coast.The HYDIST-2D numerical model was applied to simulate the rip current evolution in space and time for the study area.The results showed that the HYDIST-2D numerical model can accurately predict the location,magnitude,and microstructure of rip currents,including rip current speed,width,and length.The simulation results revealed that the rip current speed is greater during the low tide phase,with an average speed of 0.5 m s^(-1),while during high tide,the rip current speed is lower,around 0.1–0.8 m s^(-1).The width and length of the rip current also vary with the tide phase,with a wider and longer rip current observed during the low tide phase.The results also showed that the rip current speed and microstructure are influenced by the wave features,tide current,and bathymetry of the study area.The present study provides valuable insights into the dynamics of rip currents in the Bai Dai-Cam Ranh coast.The findings can be used to support the management of bathing activities and provide early warnings for potential risks associated with rip currents.展开更多
The article is devoted to decision-making in the control and design of autonomous heat supply systems with tubular gas heaters.The results of mathematical modelling and optimization of tubular gas heaters(TGN)are know...The article is devoted to decision-making in the control and design of autonomous heat supply systems with tubular gas heaters.The results of mathematical modelling and optimization of tubular gas heaters(TGN)are known.Tubular gas heaters are an extension of the term“infrared tubular gas heaters”.The main elements are:a gas burner,a tubular heater inside which gas combustion products with air move,and a mechanical fan(supply or exhaust),which ensures the movement of the coolant inside the tubular part and its removal outside.There are a number of new technical solutions that expand the scope of tubular gas heaters,for example,tubular gas heaters on pellets.Mathematical models of tubular heaters on pellets and solutions to the problems of optimal design of tubular heaters of linear structure are known.Another possible structure of tubular gas heaters is heaters with recirculation of the heating gas-air medium.Optimisation of such pellet heaters has not been performed before,which determined the subject of this paper.The article is devoted to the presentation of the method of optimization of the design solution for tubular heaters taking into account recirculation under the existing constraints.The novelty of the optimization lies in the use of a quasi-two-dimensional mathematical model for the hydraulic circuit of the heater.An evolutionary search algorithm with binary choice functions is used for numerical search of solutions,for which convergence with probability 1 to the optimal solution is shown.The algorithm contains two consecutive functions:the function of so-lution generation and the function of solution selection.The function of solution generation is built largely independently of the content of the problem to be solved,while the function of selection is built in such a way that the resulting binary selection relation is completely determined by the requirement of finding the necessary solution.The resulting binary selection relation includes both the selection components of the available constraints and the basic optimiztion requirement.展开更多
Phase transitions,as one of the most intriguing phenomena in nature,are divided into first-order phase transitions(FOPTs)and continuous ones in current classification.While the latter shows striking phenomena of scali...Phase transitions,as one of the most intriguing phenomena in nature,are divided into first-order phase transitions(FOPTs)and continuous ones in current classification.While the latter shows striking phenomena of scaling and universality,the former has recently also been demonstrated to exhibit scaling and universal behavior within a mesoscopic,coarse-grained Landau-Ginzburg theory.Here we apply this theory to a microscopic model-the paradigmatic Ising model,which undergoes FOPTs between two ordered phases below its critical temperature-and unambiguously demonstrate universal scaling behavior in such FOPTs.These results open the door for extending the theory to other microscopic FOPT systems and experimentally testing them to systematically uncover their scaling and universal behavior.展开更多
The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an over...The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.展开更多
A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface...A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface area of 427 m^(2)·g^(-1)and rich surface active sites,which help restrain polysulfides(LiPSs)through good physi-cal and chemical adsorption,while simultaneously accelerating the nucleation and dissolution kinetics of Li_(2)S,effec-tively suppressing the shuttle effect.The assembled lithium-sulfur batteries(LSBs)employing the PVS-based inter-layer delivered a high initial discharge capacity of 1386 mAh·g^(-1)at 0.1C(167.5 mAh·g^(-1)),long-term cycling stabil-ity,and good rate property.展开更多
Lithium-sulfur(Li-S)batteries with high energy density and capacity have garnered significant research attention among various energy storage devices.However,the shuttle effect of polysulfides(LiPSs)remains a major ch...Lithium-sulfur(Li-S)batteries with high energy density and capacity have garnered significant research attention among various energy storage devices.However,the shuttle effect of polysulfides(LiPSs)remains a major challenge for their practical application.The design of battery separators has become a key aspect in addressing the challenge.MXenes,a promising two-dimensional(2D)material,offer exceptional conductivity,large surface area,high mechanical strength,and active sites for surface reactions.When assembled into layered films,MXenes form highly tunable two-dimensional channels ranging from a few angstroms to over 1 nm.These nanoconfined channels are instrumental in facilitating lithium-ion transport while effectively impeding the shuttle effect of LiPSs,which are essential for improving the specific capacity and cyclic stability of Li-S batteries.Substantial progress has been made in developing MXenes-based separators for Li-S batteries,yet there remains a research gap in summarizing advancements from the perspective of interlayer engineering.This entails maintaining the 2D nanochannels of layered MXenes-based separators while modulating the physicochemical environment within the MXenes interlayers through targeted modifications.This review highlights advancements in in situ modification of MXenes and their integration with 0D,1D,and 2D materials to construct laminated nanocomposite separators for Li-S batteries.The future development directions of MXenes-based materials in Li-S energy storage devices are also outlined,to drive further advancements in MXenes for Li-S battery separators.展开更多
Titanium dioxide(TiO_(2))has been an important protective ingredient in mineral-based sunscreens since the 1990s.However,traditional TiO_(2)nanoparticle formulations have seen little improvement over the past decades ...Titanium dioxide(TiO_(2))has been an important protective ingredient in mineral-based sunscreens since the 1990s.However,traditional TiO_(2)nanoparticle formulations have seen little improvement over the past decades and continue to face persistent challenges related to light transmission,biosafety,and visual appearance.Here,we report the discovery of two-dimensional(2D)TiO_(2),characterized by a micro-sized lateral dimension(~1.6μm)and atomic-scale thickness,which fundamentally resolves these long-standing issues.The 2D structure enables exceptional light management,achieving 80%visible light transparency—rendering it nearly invisible on the skin—while maintaining UV-blocking performance comparable to unmodified rutile TiO_(2)nanoparticles.Its larger lateral size results in a two-orders-of-magnitude reduction in skin penetration(0.96 w/w%),significantly enhancing biosafety.Moreover,the unique layered architecture inherently suppresses the generation of reactive oxygen species(ROS)under sunlight exposure,reducing the ROS generation rate by 50-fold compared to traditional TiO_(2)nanoparticles.Through precise metal element modulation,we further developed the first customizable sunscreen material capable of tuning UV protection ranges and automatically matching diverse skin tones.The 2D TiO_(2)offers a potentially transformative approach to modern sunscreen formulation,combining superior UV protection,enhanced safety and a natural appearance.展开更多
Owing to their rolling friction,two-dimensional piston pumps are highly suitable as power components for electro-hydrostatic actuators(EHAs).These pumps are particularly advantageous for applications requiring high ef...Owing to their rolling friction,two-dimensional piston pumps are highly suitable as power components for electro-hydrostatic actuators(EHAs).These pumps are particularly advantageous for applications requiring high efficiency and reliability.However,the ambiguity surrounding the output flow characteristics of individual two-dimensional pumps poses a significant challenge in achieving precise closed-loop control of the EHA positions.To address this issue,this study established a comprehensive numerical model that included gap leakage to analyze the impact of leakage on the output flow characteristics of a two-dimensional piston pump.The validity of the numerical analysis was indirectly confirmed through meticulous measurements of the leakage and volumetric efficiency,ensuring robust results.The research findings indicated that,at lower pump speeds,leakage significantly affected the output flow rate,leading to potential inefficiencies in the system.Conversely,at higher rotational speeds,the impact of leakage was less pronounced,implying that the influence of leakage on the pump outlet flow must be carefully considered and managed for EHAs to perform position servo control.Additionally,the research demonstrates that two-dimensional motion does not have a unique or additional effect on pump leakage,thus simplifying the design considerations.Finally,the study concluded that maintaining an oil-filled leakage environment is beneficial because it helps reduce the impact of leakage and enhances the overall volumetric efficiency of the pump system.展开更多
Environmental catalysis has been considered one of the important research topics.Some technologies(e.g.,photocatalysis and electrocatalysis)have been intensively developed with the advance of synthetic technologies of...Environmental catalysis has been considered one of the important research topics.Some technologies(e.g.,photocatalysis and electrocatalysis)have been intensively developed with the advance of synthetic technologies of catalytical materials.In 2019,we discussed the development trend of this field,and wrote a roadmap on this topic in Chinese Chemical Letters(30(2019)2065-2088).Nowadays,we discuss it again from a new viewpoint along this road.In this paper,several subtopics are discussed,e.g.,photocatalysis based on titanium dioxide,violet phosphorus,graphitic carbon and covalent organic frameworks,electrocatalysts based on carbon,metal-and covalent-organic framework.Finally,we hope that this roadmap can enrich the development of two-dimensional materials in environmental catalysis with novel understanding,and give useful inspiration to explore new catalysts for practical applications.展开更多
It is a key challenge to prepare two-dimensional diamond(2D-diamond).Herein,we develop a method for synthesizing 2D-diamond by depositing monodisperse tantalum(Ta)atoms onto graphene substrates using a hot-filament ch...It is a key challenge to prepare two-dimensional diamond(2D-diamond).Herein,we develop a method for synthesizing 2D-diamond by depositing monodisperse tantalum(Ta)atoms onto graphene substrates using a hot-filament chemical vapor deposition setup,followed by annealing treatment under different temperatures at ambient pressure.The results indicate that when the annealing temperature increases from 700℃ to 1000℃,the size of the 2D-diamond found in the samples gradually increases from close to 20 nm to around 30 nm.Meanwhile,the size and number of amorphous carbon spheres and Ta-containing compounds between the graphene layers gradually increase.As the annealing temperature continues to rise to 1100℃,a significant aggregation of Ta-containing compounds is observed in the samples,with no diamond structure detected.This further confirms that monodisperse Ta atoms play a key role in graphene phase transition into 2D-diamond.This study provides a novel method for the ambient-pressure phase transition of graphene into 2D-diamond.展开更多
Electron-hole interactions play a crucial role in determining the optoelectronic properties of materials,and in lowdimensional systems this is especially true due to the decrease of screening.In this review,we focus o...Electron-hole interactions play a crucial role in determining the optoelectronic properties of materials,and in lowdimensional systems this is especially true due to the decrease of screening.In this review,we focus on one unique quantum phase induced by the electron-hole interaction in two-dimensional systems,known as“exciton insulators”(EIs).Although this phase of matter has been studied for more than half a century,suitable platforms for its stable realization remain scarce.We provide an overview of the strategies to realize EIs in accessible materials and structures,along with a discussion on some unique properties of EIs stemming from the band structures of these materials.Additionally,signatures in experiments to distinguish EIs are discussed.展开更多
The pursuit of sustainable hydrogen production has positioned water electrolysis as a cornerstone technology for global carbon neutrality.However,sluggish kinetics,catalyst scarcity,and system integration challenges h...The pursuit of sustainable hydrogen production has positioned water electrolysis as a cornerstone technology for global carbon neutrality.However,sluggish kinetics,catalyst scarcity,and system integration challenges hinder its widespread deployment.Ultrathin two-dimensional(2D)materials,with their atomically exposed surfaces,tunable electronic structures,and defect-engineering capabilities,present unique opportunities for next-generation electrocatalysts.This review provides an integrated overview of ultrathin 2D electrocatalysts,discussing their structural diversity,synthetic routes,structure-activity relationships,and mechanistic understanding in water electrolysis processes.Special focus is placed on the translation of 2D materials from laboratory research to practical device implementation,emphasizing challenges such as scalable fabrication,interfacial engineering,and operational durability in realistic electrolyzer environments.The role of advanced characterization techniques in capturing dynamic structural changes and active site evolution is discussed.Finally,we outline future research directions,emphasizing the synergy of machine learning-driven materials discovery,advanced operando characterization,and scalable system integration to accelerate the industrial translation of 2D electrocatalysts for green hydrogen production.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.51208160)the Natural Science Foundation of Heilongjiang Province(Grant No.QC2012C056)
文摘The features of a quasi-two-dimensional( quasi-2D) model for simulating two-phase water hammer flows with vaporous cavity in a pipe are investigated. The quasi-2D model with discrete vaporous cavity in the pipe is proposed in this paper. This model uses the quasi-2D model for pure liquid zone and one-dimensional( 1D) discrete vapor cavity model for vaporous cavity zone. The quasi-2D model solves two-dimensional equations for both axial and radial velocities and 1D equations for both pressure head and discharge by the method of characteristics. The 1D discrete vapor cavity model is used to simulate the vaporous cavity occurred when the pressure in the local pipe is lower than the vapor pressure of the liquid. The proposed model is used to simulate two-phase water flows caused by the rapid downstream valve closure in a reservoir-pipe-valve system.The results obtained by the proposed model are compared with those by the corresponding 1D model and the experimental ones provided by the literature,respectively. The comparison shows that the maximum pressure heads simulated by the proposed model are more accurate than those by the corresponding 1D model.
基金theScienceCouncil,Taiwan(GrantNo.NSC92 2211 E 037and92 2211 E 057)
文摘A vertical (laterally averaged) two-dimensional hydrodynamic model is developed for tides, tidal current, and salinity in a branched estuarine system. The governing equations are solved with the hydrostatic pressure distribution assumption and the Boussinesq approximation. An explicit scheme is employed to solve the continuity equations. The momentum and mass balance equations are solved implicitly in the Cartesian coordinate system. The tributaries are governed by the same dynamic equations. A control volume at the junctions is designed to conserve mass and volume transport in the finite difference schemes, based on the physical principle of continuum medium of fluid. Predictions by the developed model are compared with the analytic solutions of steady wind-driven circulatory flow and tidal flow. The model results for the velocities and water surface elevations coincide with analytic results. The model is then applied to the Tanshui River estuarine system. Detailed model calibration and verification have been conducted with measured water surface elevations, tidal current, and salinity distributions. The overall performance of the model is in qualitative agreement with the available field data. The calibrated and verified numerical model has been used to quantify the tidal prism and flushing rate in the Tanshui River-Tahan Stream, Hsintien Stream, and Keelung River.
基金financial support of this work by the National Natural Science Foundation of China(11472149)the Tsinghua University Initiative Scientific Research Program(2014z22074)
文摘Self-limiting oxidation of nanowires has been previously described as a reaction- or diffusion-controlled process. In this letter, the concept of finite reactive region is introduced into a diffusion-controlled model, based upon which a two-dimensional cylindrical kinetics model is developed for the oxidation of silicon nanowires and is extended for tungsten. In the model, diffusivity is affected by the expansive oxidation reaction induced stress. The dependency of the oxidation upon curvature and temperature is modeled. Good agreement between the model predictions and available experimental data is obtained. The de- veloped model serves to quantify the oxidation in two-dimensional nanostructures and is expected to facilitate their fabrication via thermal oxidation techniques.
基金Supported by the National Natural Science Foundation of China.
文摘A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.
基金supported by National Natural Science Foundation of China (Nos. 60974045 and 60674016)the Research Foundation of Education Bureau of Hunan Province, China (No. 08C090)
文摘This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both the control action and the learning action in RCS. Then, through constructing a 2D state feedback controller, the design problem of the RCS is converted to the design problem of a 2D system. Then, using 2D system theory and linear matrix inequality （LMI） method, stability criterion is derived for the system without and with uncertainties, respectively. Parameters of the system can be determined by solving the LMI of the stability criterion. Finally, numerical simulations validate the effectiveness of the proposed method.
文摘In the present paper,the two-dimensional comprehensive model,which integrates the temperature model developed by the authors using finite difference methods and microstructural evolution model,has been developed.By using different microstructural evolution equations developed by Sellars,Senuma et al.and Easka et al.,the comparison studies have been made,which present that (1) the calculated γ-grain sizes show good agreements with the measured;(2) these equations show consistencies at the end of finishing stands.
文摘In this paper, we are interested by the dissolution of NAPL (Non-Aqueous Phase Liquid) contaminants in heterogeneous soils or aquifers. The volume averaging technique is applied to 2D systems with Darcy-scale heterogeneities. A large-scale model is derived from a Darcy-scale dissolution model in the case of small and large Damkholer numbers, i.e., for smooth or sharp dissolution fronts. The resulting models in both cases have the mathematical structure of a non-equilibrium dissolution model. It is shown how to calculate the resulting mass exchange and relative permeability terms from the Darcy-scale heterogeneities and other fluid properties. One of the important finding is that the obtained values have a very different behavior compared to the Darcy-scale usual correlations. The large scale correlations are also very different between the two limit cases. The resulting large-scale models are compared favorably to Darcy-scale direct simulations.
基金supported by National Natural Science Foundation of China(72288101,72361137002,and 72101018)the Dutch Research Council(NWO Grant 482.22.01).
文摘Vehicle electrification,an important method for reducing carbon emissions from road transport,has been promoted globally.In this study,we analyze how individuals adapt to this transition in transportation and its subsequent impact on urban structure.Considering the varying travel costs associated with electric and fuel vehicles,we analyze the dynamic choices of households concerning house locations and vehicle types in a two-dimensional monocentric city.A spatial equilibrium is developed to model the interactions between urban density,vehicle age and vehicle type.An agent-based microeconomic residential choice model dynamically coupled with a house rent market is developed to analyze household choices of home locations and vehicle energy types,considering vehicle ages and competition for public charging piles.Key findings from our proposed models show that the proportion of electric vehicles(EVs)peaks at over 50%by the end of the first scrappage period,accompanied by more than a 40%increase in commuting distance and time compared to the scenario with only fuel vehicles.Simulation experiments on a theoretical grid indicate that heterogeneity-induced residential segregation can lead to urban sprawl and congestion.Furthermore,households with EVs tend to be located farther from the city center,and an increase in EV ownership contributes to urban expansion.Our study provides insights into how individuals adapt to EV transitions and the resulting impacts on home locations and land use changes.It offers a novel perspective on the dynamic interactions between EV adoption and urban development.
文摘Rip currents are a significant threat to swimmers worldwide,responsible for numerous drowning incidents each year.In Vietnam,Bai Dai Beach in Cam Ranh Bay,Khanh Hoa Province,has experienced an increase in drowning events due to rip currents in recent years.To address this issue,a comprehensive study was conducted based on developing a depth-averaged 2D hydrodynamic model to simulate rip currents in the Bai Dai-Cam Ranh coast.The HYDIST-2D numerical model was applied to simulate the rip current evolution in space and time for the study area.The results showed that the HYDIST-2D numerical model can accurately predict the location,magnitude,and microstructure of rip currents,including rip current speed,width,and length.The simulation results revealed that the rip current speed is greater during the low tide phase,with an average speed of 0.5 m s^(-1),while during high tide,the rip current speed is lower,around 0.1–0.8 m s^(-1).The width and length of the rip current also vary with the tide phase,with a wider and longer rip current observed during the low tide phase.The results also showed that the rip current speed and microstructure are influenced by the wave features,tide current,and bathymetry of the study area.The present study provides valuable insights into the dynamics of rip currents in the Bai Dai-Cam Ranh coast.The findings can be used to support the management of bathing activities and provide early warnings for potential risks associated with rip currents.
文摘The article is devoted to decision-making in the control and design of autonomous heat supply systems with tubular gas heaters.The results of mathematical modelling and optimization of tubular gas heaters(TGN)are known.Tubular gas heaters are an extension of the term“infrared tubular gas heaters”.The main elements are:a gas burner,a tubular heater inside which gas combustion products with air move,and a mechanical fan(supply or exhaust),which ensures the movement of the coolant inside the tubular part and its removal outside.There are a number of new technical solutions that expand the scope of tubular gas heaters,for example,tubular gas heaters on pellets.Mathematical models of tubular heaters on pellets and solutions to the problems of optimal design of tubular heaters of linear structure are known.Another possible structure of tubular gas heaters is heaters with recirculation of the heating gas-air medium.Optimisation of such pellet heaters has not been performed before,which determined the subject of this paper.The article is devoted to the presentation of the method of optimization of the design solution for tubular heaters taking into account recirculation under the existing constraints.The novelty of the optimization lies in the use of a quasi-two-dimensional mathematical model for the hydraulic circuit of the heater.An evolutionary search algorithm with binary choice functions is used for numerical search of solutions,for which convergence with probability 1 to the optimal solution is shown.The algorithm contains two consecutive functions:the function of so-lution generation and the function of solution selection.The function of solution generation is built largely independently of the content of the problem to be solved,while the function of selection is built in such a way that the resulting binary selection relation is completely determined by the requirement of finding the necessary solution.The resulting binary selection relation includes both the selection components of the available constraints and the basic optimiztion requirement.
基金supported by the National Natural Science Foundation of China(Grant No.12175316).
文摘Phase transitions,as one of the most intriguing phenomena in nature,are divided into first-order phase transitions(FOPTs)and continuous ones in current classification.While the latter shows striking phenomena of scaling and universality,the former has recently also been demonstrated to exhibit scaling and universal behavior within a mesoscopic,coarse-grained Landau-Ginzburg theory.Here we apply this theory to a microscopic model-the paradigmatic Ising model,which undergoes FOPTs between two ordered phases below its critical temperature-and unambiguously demonstrate universal scaling behavior in such FOPTs.These results open the door for extending the theory to other microscopic FOPT systems and experimentally testing them to systematically uncover their scaling and universal behavior.
基金the support from the National Natural Science Foundation of China(22272004,62272041)the Fundamental Research Funds for the Central Universities(YWF-22-L-1256)+1 种基金the National Key R&D Program of China(2023YFC3402600)the Beijing Institute of Technology Research Fund Program for Young Scholars(No.1870011182126)。
文摘The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.
文摘A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface area of 427 m^(2)·g^(-1)and rich surface active sites,which help restrain polysulfides(LiPSs)through good physi-cal and chemical adsorption,while simultaneously accelerating the nucleation and dissolution kinetics of Li_(2)S,effec-tively suppressing the shuttle effect.The assembled lithium-sulfur batteries(LSBs)employing the PVS-based inter-layer delivered a high initial discharge capacity of 1386 mAh·g^(-1)at 0.1C(167.5 mAh·g^(-1)),long-term cycling stabil-ity,and good rate property.
基金supported by Beijing Natural Science Foundation(Nos.2232037 and 2242035)the National Natural Science Foundation of China(Nos.22005012,22105012 and 51803183)+1 种基金Chunhui Plan Cooperative Project of Ministry of Education(No.202201298)the China Postdoctoral Science Foundation Funded Project(No.2023M733520).
文摘Lithium-sulfur(Li-S)batteries with high energy density and capacity have garnered significant research attention among various energy storage devices.However,the shuttle effect of polysulfides(LiPSs)remains a major challenge for their practical application.The design of battery separators has become a key aspect in addressing the challenge.MXenes,a promising two-dimensional(2D)material,offer exceptional conductivity,large surface area,high mechanical strength,and active sites for surface reactions.When assembled into layered films,MXenes form highly tunable two-dimensional channels ranging from a few angstroms to over 1 nm.These nanoconfined channels are instrumental in facilitating lithium-ion transport while effectively impeding the shuttle effect of LiPSs,which are essential for improving the specific capacity and cyclic stability of Li-S batteries.Substantial progress has been made in developing MXenes-based separators for Li-S batteries,yet there remains a research gap in summarizing advancements from the perspective of interlayer engineering.This entails maintaining the 2D nanochannels of layered MXenes-based separators while modulating the physicochemical environment within the MXenes interlayers through targeted modifications.This review highlights advancements in in situ modification of MXenes and their integration with 0D,1D,and 2D materials to construct laminated nanocomposite separators for Li-S batteries.The future development directions of MXenes-based materials in Li-S energy storage devices are also outlined,to drive further advancements in MXenes for Li-S battery separators.
基金supported by the National Key Research and Development Project(No.2019YFA0705403)the National Natural Science Foundation of China(No.T2293693,52273311)+2 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2020B0301030002)and the Shenzhen Basic Research Project(Nos.WDZC20200824091903001,JSGG20220831105402004,JCYJ20220818100806014)Shenzhen Major Science and Technology Projects(Nos.KCXFZ20240903094013018,KCXFZ20240903094203005)。
文摘Titanium dioxide(TiO_(2))has been an important protective ingredient in mineral-based sunscreens since the 1990s.However,traditional TiO_(2)nanoparticle formulations have seen little improvement over the past decades and continue to face persistent challenges related to light transmission,biosafety,and visual appearance.Here,we report the discovery of two-dimensional(2D)TiO_(2),characterized by a micro-sized lateral dimension(~1.6μm)and atomic-scale thickness,which fundamentally resolves these long-standing issues.The 2D structure enables exceptional light management,achieving 80%visible light transparency—rendering it nearly invisible on the skin—while maintaining UV-blocking performance comparable to unmodified rutile TiO_(2)nanoparticles.Its larger lateral size results in a two-orders-of-magnitude reduction in skin penetration(0.96 w/w%),significantly enhancing biosafety.Moreover,the unique layered architecture inherently suppresses the generation of reactive oxygen species(ROS)under sunlight exposure,reducing the ROS generation rate by 50-fold compared to traditional TiO_(2)nanoparticles.Through precise metal element modulation,we further developed the first customizable sunscreen material capable of tuning UV protection ranges and automatically matching diverse skin tones.The 2D TiO_(2)offers a potentially transformative approach to modern sunscreen formulation,combining superior UV protection,enhanced safety and a natural appearance.
基金Supported by National Natural Science Foundation of China(Grant No.52205072).
文摘Owing to their rolling friction,two-dimensional piston pumps are highly suitable as power components for electro-hydrostatic actuators(EHAs).These pumps are particularly advantageous for applications requiring high efficiency and reliability.However,the ambiguity surrounding the output flow characteristics of individual two-dimensional pumps poses a significant challenge in achieving precise closed-loop control of the EHA positions.To address this issue,this study established a comprehensive numerical model that included gap leakage to analyze the impact of leakage on the output flow characteristics of a two-dimensional piston pump.The validity of the numerical analysis was indirectly confirmed through meticulous measurements of the leakage and volumetric efficiency,ensuring robust results.The research findings indicated that,at lower pump speeds,leakage significantly affected the output flow rate,leading to potential inefficiencies in the system.Conversely,at higher rotational speeds,the impact of leakage was less pronounced,implying that the influence of leakage on the pump outlet flow must be carefully considered and managed for EHAs to perform position servo control.Additionally,the research demonstrates that two-dimensional motion does not have a unique or additional effect on pump leakage,thus simplifying the design considerations.Finally,the study concluded that maintaining an oil-filled leakage environment is beneficial because it helps reduce the impact of leakage and enhances the overall volumetric efficiency of the pump system.
基金supported by the National Natural Science Foundation of China(Nos.52272290,21972030,52073119,and 52373210)the Natural Science Foundation of Jilin Province(No.20230101029JC)+1 种基金the Fundamental Research Program of Shanxi Province(No.202303021212159)the Monash University Malaysia–ASEAN grant(No.ASE-000010)。
文摘Environmental catalysis has been considered one of the important research topics.Some technologies(e.g.,photocatalysis and electrocatalysis)have been intensively developed with the advance of synthetic technologies of catalytical materials.In 2019,we discussed the development trend of this field,and wrote a roadmap on this topic in Chinese Chemical Letters(30(2019)2065-2088).Nowadays,we discuss it again from a new viewpoint along this road.In this paper,several subtopics are discussed,e.g.,photocatalysis based on titanium dioxide,violet phosphorus,graphitic carbon and covalent organic frameworks,electrocatalysts based on carbon,metal-and covalent-organic framework.Finally,we hope that this roadmap can enrich the development of two-dimensional materials in environmental catalysis with novel understanding,and give useful inspiration to explore new catalysts for practical applications.
基金supported by the Key Project of the National Natural Science Foundation of China(Grant No.U1809210)the International Science Technology Cooperation Program of China(Grant No.2014DFR51160)+3 种基金the One Belt and One Road International Cooperation Project from the Key Research and Development Program of Zhejiang Province,China(Grant No.2018C04021)the National Natural Science Foundation of China(Grant Nos.50972129,50602039,and 52102052)the Fund from Institute of Wenzhou,Zhejiang University(Grant Nos.XMGL-CX-202305 and XMGLKJZX-202307)the Project from Tanghe Scientific&Technology Company(Grant No.KYY-HX-20230024).
文摘It is a key challenge to prepare two-dimensional diamond(2D-diamond).Herein,we develop a method for synthesizing 2D-diamond by depositing monodisperse tantalum(Ta)atoms onto graphene substrates using a hot-filament chemical vapor deposition setup,followed by annealing treatment under different temperatures at ambient pressure.The results indicate that when the annealing temperature increases from 700℃ to 1000℃,the size of the 2D-diamond found in the samples gradually increases from close to 20 nm to around 30 nm.Meanwhile,the size and number of amorphous carbon spheres and Ta-containing compounds between the graphene layers gradually increase.As the annealing temperature continues to rise to 1100℃,a significant aggregation of Ta-containing compounds is observed in the samples,with no diamond structure detected.This further confirms that monodisperse Ta atoms play a key role in graphene phase transition into 2D-diamond.This study provides a novel method for the ambient-pressure phase transition of graphene into 2D-diamond.
基金supported by the National Key Research&Development Program of China(Grant Nos.2022YFA1403500 and 2021YFA1400500)the National Science Foundation of China(Grant Nos.62321004,12234001,and 12474215)+1 种基金supported by New Cornerstone Science Foundationa fellowship and a CRF award from the Research Grants Council of the Hong Kong Special Administrative Region,China(Grant Nos.HKUST SRFS2324-6S01 and C7037-22GF)。
文摘Electron-hole interactions play a crucial role in determining the optoelectronic properties of materials,and in lowdimensional systems this is especially true due to the decrease of screening.In this review,we focus on one unique quantum phase induced by the electron-hole interaction in two-dimensional systems,known as“exciton insulators”(EIs).Although this phase of matter has been studied for more than half a century,suitable platforms for its stable realization remain scarce.We provide an overview of the strategies to realize EIs in accessible materials and structures,along with a discussion on some unique properties of EIs stemming from the band structures of these materials.Additionally,signatures in experiments to distinguish EIs are discussed.
文摘The pursuit of sustainable hydrogen production has positioned water electrolysis as a cornerstone technology for global carbon neutrality.However,sluggish kinetics,catalyst scarcity,and system integration challenges hinder its widespread deployment.Ultrathin two-dimensional(2D)materials,with their atomically exposed surfaces,tunable electronic structures,and defect-engineering capabilities,present unique opportunities for next-generation electrocatalysts.This review provides an integrated overview of ultrathin 2D electrocatalysts,discussing their structural diversity,synthetic routes,structure-activity relationships,and mechanistic understanding in water electrolysis processes.Special focus is placed on the translation of 2D materials from laboratory research to practical device implementation,emphasizing challenges such as scalable fabrication,interfacial engineering,and operational durability in realistic electrolyzer environments.The role of advanced characterization techniques in capturing dynamic structural changes and active site evolution is discussed.Finally,we outline future research directions,emphasizing the synergy of machine learning-driven materials discovery,advanced operando characterization,and scalable system integration to accelerate the industrial translation of 2D electrocatalysts for green hydrogen production.
