A two-dimensional directional modulation(DM)technology with dual-mode orbital angular momentum(OAM)beam is proposed for physical-layer security of the relay unmanned aerial vehicle(UAV)tracking transmission.The elevat...A two-dimensional directional modulation(DM)technology with dual-mode orbital angular momentum(OAM)beam is proposed for physical-layer security of the relay unmanned aerial vehicle(UAV)tracking transmission.The elevation and azimuth of the vortex beam are modulated into the constellation.which can form the digital waveform with the encoding modulation.Since the signal is direction-dependent,the modulated waveform is purposely distorted in other directions to offer a security technology.Two concentric uniform circular arrays(UCAs)with different radii are excited to generate dual vortex beams with orthogonality for the composite signal,which can increase the demodulation difficulty.Due to the phase propagation characteristics of vortex beam,the constellation at the desired azimuth angle will change continuously within a wavelength.A desired single antenna receiver can use the propagation phase compensation and an opposite helical phase factor for the signal demodulation in the desired direction.Simulations show that the proposed OAM-DM scheme offers a security approach with direction sensitivity transmission.展开更多
The problem of two-dimensional direction finding is approached by using a multi-layer Lshaped array. The proposed method is based on two sequential sparse representations,fulfilling respectively the estimation of elev...The problem of two-dimensional direction finding is approached by using a multi-layer Lshaped array. The proposed method is based on two sequential sparse representations,fulfilling respectively the estimation of elevation angles,and azimuth angles. For the estimation of elevation angles,the weighted sub-array smoothing technique for perfect data decorrelation is used to produce a covariance vector suitable for exact sparse representation,related only to the elevation angles. The estimates of elevation angles are then obtained by sparse restoration associated with this elevation angle dependent covariance vector. The estimates of elevation angles are further incorporated with weighted sub-array smoothing to yield a second covariance vector for precise sparse representation related to both elevation angles,and azimuth angles. The estimates of azimuth angles,automatically paired with the estimates of elevation angles,are finally obtained by sparse restoration associated with this latter elevation-azimuth angle related covariance vector. Simulation results are included to illustrate the performance of the proposed method.展开更多
The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor ...The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor featuring a broad spectral absorption range,is successfully employed as the electron acceptor to combine with CdS for constructing a S-scheme heterojunction.The optimized photocatalyst(CdSCuO2∶1)delivers an exceptional hydrogen evolution rate of 18.89 mmol/(g·h),4.15-fold higher compared with bare CdS.X-ray photoelectron spectroscopy(XPS)and ultraviolet-visible diffuse reflection absorption spectroscopy(UV-vis DRS)confirmed the S-scheme band structure of the composites.Moreover,the surface photovoltage(SPV)and electron paramagnetic resonance(EPR)indicated that the photogenerated electrons and photogenerated holes of CdS-CuO2∶1 were respectively transferred to the conduction band(CB)of CdS with a higher reduction potential and the valence band(VB)of CuO with a higher oxidation potential under illumination,as expected for the S-scheme mechanism.Density-functional-theory calculations of the electron density difference(EDD)disclose an interfacial electric field oriented from CdS to CuO.This built-in field suppresses charge recombination and accelerates carrier migration,rationalizing the markedly enhanced PHE activity.This study offers a novel strategy for designing S-scheme heterojunctions with high light harvesting and charge utilization toward sustainable solar-tohydrogen conversion.展开更多
As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and el...As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and electrochemical characteristics,MXenes have shown great potential in brain-inspired neuromorphic computing electronics,including neuromorphic gas sensors,pressure sensors and photodetectors.This paper provides a forward-looking review of the research progress regarding MXenes in the neuromorphic sensing domain and discussed the critical challenges that need to be resolved.Key bottlenecks such as insufficient long-term stability under environmental exposure,high costs,scalability limitations in large-scale production,and mechanical mismatch in wearable integration hinder their practical deployment.Furthermore,unresolved issues like interfacial compatibility in heterostructures and energy inefficiency in neu-romorphic signal conversion demand urgent attention.The review offers insights into future research directions enhance the fundamental understanding of MXene properties and promote further integration into neuromorphic computing applications through the convergence with various emerging technologies.展开更多
Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of a...Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of available material systems,making the identification of novel 2D multilayer kagome candidates particularly important.In this work,three types of 2D materials with trilayer kagome lattices,namely Sc_(6)S_(5)X_(6)(X=Cl,Br,I),are predicted based on first-principles calculations.These 2D materials feature two kagome lattices composed of Sc atoms and one kagome lattice composed of S atoms.Stability analysis indicates that these materials can exist as free-standing 2D materials.Electronic structure calculations reveal that Sc_(6)S_(5)X_(6)are narrow-bandgap semiconductors(0.76–0.95 e V),with their band structures exhibiting flat bands contributed by Sc-based kagome lattices and Dirac band gaps resulting from symmetry breaking.The sulfur-based kagome lattice in the central layer contributes an independent flat band below the Fermi level.Additionally,Sc_(6)S_(5)X_(6)exhibit high carrier mobility,with hole and electron mobilities reaching up to 10^(3)cm^(2)·V^(-1)·s^(-1),indicating potential applications in low-dimensional electronic devices.This work provides an excellent example for the development of novel multilayer 2D kagome materials.展开更多
Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usu...Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usually involves complex procedures and extremely depends on unidirectional freezing technique.Herein,we propose a groundbreaking approach that leverages the assemblies of salting-out protein induced by ammonium metatungstate(AM)as the precursor,and then acquire directional three-dimensional carbon-based foams through simple pyrolysis.The electrostatic interaction between AM and protein ensures well dispersion of WC_(1−x)nanoparticles on carbon frameworks.The content of WC_(1−x)nanoparticles can be rationally regulated by AM dosage,and it also affects the electromagnetic(EM)properties of final carbon-based foams.The optimized foam exhibits exceptional EM absorption performance,achieving a remarkable minimum reflection loss of−72.0 dB and an effective absorption bandwidth of 6.3 GHz when EM wave propagates parallel to the directional pores.Such performance benefits from the synergistic effects of macroporous architecture and compositional design.Although there is a directional dependence of EM absorption,radar stealth simulation demonstrates that these foams can still promise considerable reduction in radar cross section with the change of incident angle.Moreover,COMSOL simulation further identifies their good performance in preventing EM interference among different electronic components.展开更多
For a multi-frequency non-reciprocal optical device,we first realize multi-frequency optical non-reciprocal transmission using a non-Hermitian multi-mode resonator array.Practically,multi-frequency operation can add c...For a multi-frequency non-reciprocal optical device,we first realize multi-frequency optical non-reciprocal transmission using a non-Hermitian multi-mode resonator array.Practically,multi-frequency operation can add channels to the non-reciprocal optical device and the non-reciprocity can route optical signals and prevent the reverse flow of noise.Using the Scully–Lamb model and gain saturation effect,we accomplish dual-frequency non-reciprocal transmission by introducing nonlinearity into a linear array of four-mode resonators.The accomplishment is directly demonstrated by the non-reciprocal transmission phenomena present in the non-divergent peaks.For example,a directional cyclic amplifier is constructed with non-reciprocal units.Regarding potential applications,non-reciprocal optical systems can be employed in dual-frequency control,parallel information processing,photonic integrated circuits,optical devices and so on.展开更多
Enamel,the inorganic tissue covering the crowns of teeth,is known for its remarkable resilience and hardness.These properties originate from its high proportion of mineralized matrix and complex internal microarchitec...Enamel,the inorganic tissue covering the crowns of teeth,is known for its remarkable resilience and hardness.These properties originate from its high proportion of mineralized matrix and complex internal microarchitecture.On an ultrastructural level,it consists of directionally arranged enamel prisms.Continuously growing rodent incisors are an exemplary case of this phenomenon.Their enamel has a consistent decussation pattern,providing teeth with extremely high resistance and ensuring they remain constantly sharp.While the decussation pattern has been described in detail,mechanisms behind its formation have not been experimentally proven.Here,we show that the highly organized enamel micropattern is generated by directional epithelial sliding of enamel-forming ameloblasts in vivo.Our results detail how enamel micropatterning stems from individual cell cluster segregation and subsequent reciprocal interweaving.Based on this determination,we introduce and experimentally demonstrate a new model of enamel decussation pattern formation.展开更多
In 2025,I had the honor of delivering keynote speeches at the conferences of the International Society for Diet and Activity Methods in Toronto,Canada,and the International Society of Behavioural Nutrition and Physica...In 2025,I had the honor of delivering keynote speeches at the conferences of the International Society for Diet and Activity Methods in Toronto,Canada,and the International Society of Behavioural Nutrition and Physical Activity in Auckland,Aotearoa,New Zealand.These opportunities prompted deep reflection on scientific research in general,and on physical activity and health research specifically.展开更多
The directional design of functional materials with multi-objective constraints is a big challenge,in which performance and stability are determined by a complicated interconnection of different physical factors.We ap...The directional design of functional materials with multi-objective constraints is a big challenge,in which performance and stability are determined by a complicated interconnection of different physical factors.We apply multi-objective optimization,based on the Pareto Efficiency and Particle-Swarm Optimization methods,to design new functional materials directionally.As a demonstration,we achieve the thermoelectric design of 2D SnSe materials via the above methods.We identify several novel metastable 2D SnSe structures with simultaneously lower free energy and better thermoelectric performance in their experimentally reported monolayer structures.We hope that the results of our work on the multi-objective Pareto Optimization method will represent a step forward in the integrative design of future multi-objective and multi-functional materials.展开更多
Directional modulation(DM)is one of the most promising secure communication techniques.However,when the eavesdropper is co-located with the legitimate receiver,the conventional DM has the disadvantages of weak anti-sc...Directional modulation(DM)is one of the most promising secure communication techniques.However,when the eavesdropper is co-located with the legitimate receiver,the conventional DM has the disadvantages of weak anti-scanning capability,anti-deciphering capability,and low secrecy rate.In response to these problems,we propose a twodimensional multi-term weighted fractional Fourier transform aided DM scheme,in which the legitimate receiver and the transmitter use different transform terms and transform orders to encrypt and decrypt the confidential information.In order to further lower the probability of being deciphered by an eavesdropper,we use the subblock partition method to convert the one-dimensional modulated signal vector into a twodimensional signal matrix,increasing the confusion of the useful information.Numerical results demonstrate that the proposed DM scheme not only provides stronger anti-deciphering and anti-scanning capabilities but also improves the secrecy rate performance of the system.展开更多
Using Langevin simulations, we study numerically the directional mode-locking of the dynamics of two- dimensional superpararnagnetic colloidal system in a periodic pinning array. When the colloidal particles are initi...Using Langevin simulations, we study numerically the directional mode-locking of the dynamics of two- dimensional superpararnagnetic colloidal system in a periodic pinning array. When the colloidal particles are initially commensurate with the pinning sites, there appear mode-locking steps in the average velocity of colloidal particles along certain directions of the external driving force. With an increase in the pinning strength, the width of the step increases linearly but the velocity at the step decreases parabolically.展开更多
A fast separable approach based on a cross array is presented, which has coarsegrained parallelism. Its computational load is far less than that of the two-dimensional (2-D) direct processing method and other existing...A fast separable approach based on a cross array is presented, which has coarsegrained parallelism. Its computational load is far less than that of the two-dimensional (2-D) direct processing method and other existing separable approaches. In order to compensate for the performance degradation due to separable processing, two postprocessing schemes are also proposed. Some computer simulation results are provided for illustration in the end.展开更多
This paper proposes a novel algorithm for Two-Dimensional(2D) central Directionof-Arrival(DOA) estimation of incoherently distributed sources. In particular, an orthogonal array structure consisting of two Non-uniform...This paper proposes a novel algorithm for Two-Dimensional(2D) central Directionof-Arrival(DOA) estimation of incoherently distributed sources. In particular, an orthogonal array structure consisting of two Non-uniform Linear Arrays(NLAs) is considered. Based on first-order Taylor series approximation, the Generalized Array Manifold(GAM) model can first be established to separate the central DOAs from the original array manifold. Then, the Hadamard rotational invariance relationships inside the GAMs of two NLAs are identified. With the aid of such relationships, the central elevation and azimuth DOAs can be estimated through a search-free polynomial rooting method. Additionally, a simple parameter pairing of the estimated 2D angular parameters is also accomplished via the Hadamard rotational invariance relationship inside the GAM of the whole array. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao lower bound. The simulation results show that the proposed algorithm can achieve a remarkably higher precision at less complexity increment compared with the existing low-complexity methods, which benefits from the larger array aperture of the NLAs. Moreover, it requires no priori information about the angular distributed function.展开更多
The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an over...The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.展开更多
Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-ba...Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-based solid waste expanding agent.First,the mechanism of directional fracturing blasting by the IESF was analyzed,and the criterion of directional crack initiation was established.On this basis,laboratory experiments and numerical simulations were conducted to systematically evaluate the directional fracturing blasting performance of the IESF.The results indicate that the IESF presents an excellent directional fracturing effect,with average surface undulation differences ranging from 8.1 mm to 22.7 mm on the fracture surfaces.Moreover,during concrete fracturing tests,the stresses and strains in the fracturing direction are measured to be 2.16-3.71 times and 8 times larger than those in the nonfracturing direction,respectively.Finally,the IESF technique was implemented for no-pillar mining with gob-side entry retaining through roof cutting and pressure relief in an underground coal mine.The IESF technique effectively created directional cracks in the roof without causing severe roadway deformation,achieving an average cutting rate and maximum roadway deformation of 94%and 197 mm,respectively.These on-site test results verified its excellent directional rock fracturing performance.The IESF technique,which is safe,efficient,and green,has considerable application prospects in the field of rock mechanics and engineering.展开更多
Columnar grains offer considerable advantages in terms of microstructure for resisting high-temperature low-cycle fatigue. In additive manufacturing, the formation of fine columnar grains is common. However, post-heat...Columnar grains offer considerable advantages in terms of microstructure for resisting high-temperature low-cycle fatigue. In additive manufacturing, the formation of fine columnar grains is common. However, post-heat treatment often transforms these grains into equiaxed grains. This study aimed to tailor the grain morphology by controlling the precipitation of carbides. By balancing the restraining effects of carbide pinning and grain growth, we achieved carbide-assisted in situ-directional recrystallization. This process preserved the columnar grains created via laser powder bed fusion, even after high-temperature heat treatment. The approach emphasizes promoting the longitudinal growth of columnar grains while preventing their broadening. Additionally, we characterized the evolution of carbides and γ′ precipitates and examined their role in nucleation and growth during recrystallization. This study supports the viability of carbide-assisted in situ-directional recrystallization in additive manufacturing alloys, introducing an innovative strategy for microstructure customization. The implementation of carbon stabilization (CS) treatment to control the carbide distribution led to a 40 % improvement in the creep life at 900 ℃ and 150 MPa.展开更多
The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface...The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface transfer doping,surface electron acceptor materials with high electron affinity(EA)are required to produce a high density of two-dimensional hole gas(2DHG)on the H-diamond subsurface.We have established ingenious theoretical models to demonstrate that even if these solid materials do not have a high EA value,they remain capable of absorbing electrons from the H-diamond surface by forming a negatively charged interface to act as a surface electron acceptor in the surface transfer doping model.Our calculations,particularly for the local density of states,provide compelling evidence that the effect of an interface with negative charges induces an upward band bending on the H-diamond side.Furthermore,the valence band maximum of the diamond atoms at the interface crosses the Fermi level,giving rise to strong surface transfer p-type doping.These results give a strong theoretical interpretation of the origin of 2DHG on H-diamond surfaces.The proposed guidelines contribute to further improvements in the performance of 2DHG H-diamond field effect transistors.展开更多
A direct method to find the first integral for two-dimensional autonomous system in polar coordinates is suggested. It is shown that if the equation of motion expressed by differential 1-forms for a given autonomous H...A direct method to find the first integral for two-dimensional autonomous system in polar coordinates is suggested. It is shown that if the equation of motion expressed by differential 1-forms for a given autonomous Hamiltonian system is multiplied by a set of multiplicative functions, then the general expression of the first integral can be obtained, An example is given to illustrate the application of the results.展开更多
Developing high-strength and ductile metallic parts with designable shapes is an unfading research topic for material science and engineering.As a revolutionary technology,additive manufacturing(AM)pro-vides a new pat...Developing high-strength and ductile metallic parts with designable shapes is an unfading research topic for material science and engineering.As a revolutionary technology,additive manufacturing(AM)pro-vides a new pathway for producing complex-shaped metallic parts with the possibility of in situ tailoring their microstructure.However,AM is not always ideally applicable for all metals and alloys.Eutectic high entropy alloys(EHEAs)contain both the advantages of the eutectic alloys and high entropy alloys(HEAs),and EHEAs show significant potential in AM due to their excellent mechanical properties and good fluid-ity.Herein,heterogeneous and ultra-fine eutectic lamellar microstructure with directional growth along the deposition direction(DD)was obtained by adjusting the process parameters of AM to improve the strength and ductility of EHEAs.Compared with the as-cast sample,the simultaneous increment in both strength and ductility is achieved by AM.Combination of strength and ductility of the AM sample ten-sile along the DD direction(yield strength σ_(y)=1115 MPa,ultimate tensile strength σ_(UTS)=1417 MPa,ultimate tensile strain ε_(U)=23%)in this work was superior to most of the additive manufactured al-loys and comparable to the thermomechanical-treated EHEAs with the best mechanical properties.The high strength and good ductility of the AM were mainly attributed to the ultra-fine lamellar nature and fully constrained soft and hard lamellar microstructure,which produces an obvious hetero-deformation induced(HDI)strengthening and high crack buffering effect during the deformation.This work provides a new possibility to achieve high strength and ductile complex-shaped metallic parts via designing direc-tional lamellar eutectic structures by AM.展开更多
基金supported by the National Natural Science Foundation of China(62031017,61971221)the Aeronautical Science Foundation of China(201901052001)。
文摘A two-dimensional directional modulation(DM)technology with dual-mode orbital angular momentum(OAM)beam is proposed for physical-layer security of the relay unmanned aerial vehicle(UAV)tracking transmission.The elevation and azimuth of the vortex beam are modulated into the constellation.which can form the digital waveform with the encoding modulation.Since the signal is direction-dependent,the modulated waveform is purposely distorted in other directions to offer a security technology.Two concentric uniform circular arrays(UCAs)with different radii are excited to generate dual vortex beams with orthogonality for the composite signal,which can increase the demodulation difficulty.Due to the phase propagation characteristics of vortex beam,the constellation at the desired azimuth angle will change continuously within a wavelength.A desired single antenna receiver can use the propagation phase compensation and an opposite helical phase factor for the signal demodulation in the desired direction.Simulations show that the proposed OAM-DM scheme offers a security approach with direction sensitivity transmission.
基金Supported by the National Natural Science Foundation of China(61331019,61490691)
文摘The problem of two-dimensional direction finding is approached by using a multi-layer Lshaped array. The proposed method is based on two sequential sparse representations,fulfilling respectively the estimation of elevation angles,and azimuth angles. For the estimation of elevation angles,the weighted sub-array smoothing technique for perfect data decorrelation is used to produce a covariance vector suitable for exact sparse representation,related only to the elevation angles. The estimates of elevation angles are then obtained by sparse restoration associated with this elevation angle dependent covariance vector. The estimates of elevation angles are further incorporated with weighted sub-array smoothing to yield a second covariance vector for precise sparse representation related to both elevation angles,and azimuth angles. The estimates of azimuth angles,automatically paired with the estimates of elevation angles,are finally obtained by sparse restoration associated with this latter elevation-azimuth angle related covariance vector. Simulation results are included to illustrate the performance of the proposed method.
文摘The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor featuring a broad spectral absorption range,is successfully employed as the electron acceptor to combine with CdS for constructing a S-scheme heterojunction.The optimized photocatalyst(CdSCuO2∶1)delivers an exceptional hydrogen evolution rate of 18.89 mmol/(g·h),4.15-fold higher compared with bare CdS.X-ray photoelectron spectroscopy(XPS)and ultraviolet-visible diffuse reflection absorption spectroscopy(UV-vis DRS)confirmed the S-scheme band structure of the composites.Moreover,the surface photovoltage(SPV)and electron paramagnetic resonance(EPR)indicated that the photogenerated electrons and photogenerated holes of CdS-CuO2∶1 were respectively transferred to the conduction band(CB)of CdS with a higher reduction potential and the valence band(VB)of CuO with a higher oxidation potential under illumination,as expected for the S-scheme mechanism.Density-functional-theory calculations of the electron density difference(EDD)disclose an interfacial electric field oriented from CdS to CuO.This built-in field suppresses charge recombination and accelerates carrier migration,rationalizing the markedly enhanced PHE activity.This study offers a novel strategy for designing S-scheme heterojunctions with high light harvesting and charge utilization toward sustainable solar-tohydrogen conversion.
基金supported by the NSFC(12474071)Natural Science Foundation of Shandong Province(ZR2024YQ051,ZR2025QB50)+6 种基金Guangdong Basic and Applied Basic Research Foundation(2025A1515011191)the Shanghai Sailing Program(23YF1402200,23YF1402400)funded by Basic Research Program of Jiangsu(BK20240424)Open Research Fund of State Key Laboratory of Crystal Materials(KF2406)Taishan Scholar Foundation of Shandong Province(tsqn202408006,tsqn202507058)Young Talent of Lifting engineering for Science and Technology in Shandong,China(SDAST2024QTB002)the Qilu Young Scholar Program of Shandong University。
文摘As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and electrochemical characteristics,MXenes have shown great potential in brain-inspired neuromorphic computing electronics,including neuromorphic gas sensors,pressure sensors and photodetectors.This paper provides a forward-looking review of the research progress regarding MXenes in the neuromorphic sensing domain and discussed the critical challenges that need to be resolved.Key bottlenecks such as insufficient long-term stability under environmental exposure,high costs,scalability limitations in large-scale production,and mechanical mismatch in wearable integration hinder their practical deployment.Furthermore,unresolved issues like interfacial compatibility in heterostructures and energy inefficiency in neu-romorphic signal conversion demand urgent attention.The review offers insights into future research directions enhance the fundamental understanding of MXene properties and promote further integration into neuromorphic computing applications through the convergence with various emerging technologies.
基金supported by the Fundamental Research Funds for the Central Universities(WUT:2024IVA052 and Grant No.104972025KFYjc0089)。
文摘Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of available material systems,making the identification of novel 2D multilayer kagome candidates particularly important.In this work,three types of 2D materials with trilayer kagome lattices,namely Sc_(6)S_(5)X_(6)(X=Cl,Br,I),are predicted based on first-principles calculations.These 2D materials feature two kagome lattices composed of Sc atoms and one kagome lattice composed of S atoms.Stability analysis indicates that these materials can exist as free-standing 2D materials.Electronic structure calculations reveal that Sc_(6)S_(5)X_(6)are narrow-bandgap semiconductors(0.76–0.95 e V),with their band structures exhibiting flat bands contributed by Sc-based kagome lattices and Dirac band gaps resulting from symmetry breaking.The sulfur-based kagome lattice in the central layer contributes an independent flat band below the Fermi level.Additionally,Sc_(6)S_(5)X_(6)exhibit high carrier mobility,with hole and electron mobilities reaching up to 10^(3)cm^(2)·V^(-1)·s^(-1),indicating potential applications in low-dimensional electronic devices.This work provides an excellent example for the development of novel multilayer 2D kagome materials.
基金financially supported by the National Natural Science Foundation of China(Nos.22475057 and No.52373262).
文摘Directional three-dimensional carbon-based foams are emerging as highly attractive candidates for promising electromagnetic wave absorbing materials(EWAMs)thanks to their unique architecture,but their construction usually involves complex procedures and extremely depends on unidirectional freezing technique.Herein,we propose a groundbreaking approach that leverages the assemblies of salting-out protein induced by ammonium metatungstate(AM)as the precursor,and then acquire directional three-dimensional carbon-based foams through simple pyrolysis.The electrostatic interaction between AM and protein ensures well dispersion of WC_(1−x)nanoparticles on carbon frameworks.The content of WC_(1−x)nanoparticles can be rationally regulated by AM dosage,and it also affects the electromagnetic(EM)properties of final carbon-based foams.The optimized foam exhibits exceptional EM absorption performance,achieving a remarkable minimum reflection loss of−72.0 dB and an effective absorption bandwidth of 6.3 GHz when EM wave propagates parallel to the directional pores.Such performance benefits from the synergistic effects of macroporous architecture and compositional design.Although there is a directional dependence of EM absorption,radar stealth simulation demonstrates that these foams can still promise considerable reduction in radar cross section with the change of incident angle.Moreover,COMSOL simulation further identifies their good performance in preventing EM interference among different electronic components.
基金supported by the National Nature Science Foundation of China(Grant Nos.12475019 and 12073056)the Major National Science and Technology Project of China(Grant No.BX2024B054)+1 种基金National Lab of Solid State Microstructure of Nanjing University(Grant Nos.M35040,M35053,and M37014)the Natural Science Foundation of Shandong Province(Grant No.ZR2024MA038)。
文摘For a multi-frequency non-reciprocal optical device,we first realize multi-frequency optical non-reciprocal transmission using a non-Hermitian multi-mode resonator array.Practically,multi-frequency operation can add channels to the non-reciprocal optical device and the non-reciprocity can route optical signals and prevent the reverse flow of noise.Using the Scully–Lamb model and gain saturation effect,we accomplish dual-frequency non-reciprocal transmission by introducing nonlinearity into a linear array of four-mode resonators.The accomplishment is directly demonstrated by the non-reciprocal transmission phenomena present in the non-divergent peaks.For example,a directional cyclic amplifier is constructed with non-reciprocal units.Regarding potential applications,non-reciprocal optical systems can be employed in dual-frequency control,parallel information processing,photonic integrated circuits,optical devices and so on.
基金supported by the Czech Science Foundation (23-06160S)by the Faculty of Medicine of Masaryk University (MUNI/A/1738/2024)。
文摘Enamel,the inorganic tissue covering the crowns of teeth,is known for its remarkable resilience and hardness.These properties originate from its high proportion of mineralized matrix and complex internal microarchitecture.On an ultrastructural level,it consists of directionally arranged enamel prisms.Continuously growing rodent incisors are an exemplary case of this phenomenon.Their enamel has a consistent decussation pattern,providing teeth with extremely high resistance and ensuring they remain constantly sharp.While the decussation pattern has been described in detail,mechanisms behind its formation have not been experimentally proven.Here,we show that the highly organized enamel micropattern is generated by directional epithelial sliding of enamel-forming ameloblasts in vivo.Our results detail how enamel micropatterning stems from individual cell cluster segregation and subsequent reciprocal interweaving.Based on this determination,we introduce and experimentally demonstrate a new model of enamel decussation pattern formation.
文摘In 2025,I had the honor of delivering keynote speeches at the conferences of the International Society for Diet and Activity Methods in Toronto,Canada,and the International Society of Behavioural Nutrition and Physical Activity in Auckland,Aotearoa,New Zealand.These opportunities prompted deep reflection on scientific research in general,and on physical activity and health research specifically.
基金Supported by the National Natural Science Foundation of China(Grant Nos.11935010 and 11775159)the Shanghai Science and Technology Committee(Grant Nos.18ZR1442800 and 18JC1410900)the Opening Project of Shanghai Key Laboratory of Special Artificial Microstructure Materials and Technology.
文摘The directional design of functional materials with multi-objective constraints is a big challenge,in which performance and stability are determined by a complicated interconnection of different physical factors.We apply multi-objective optimization,based on the Pareto Efficiency and Particle-Swarm Optimization methods,to design new functional materials directionally.As a demonstration,we achieve the thermoelectric design of 2D SnSe materials via the above methods.We identify several novel metastable 2D SnSe structures with simultaneously lower free energy and better thermoelectric performance in their experimentally reported monolayer structures.We hope that the results of our work on the multi-objective Pareto Optimization method will represent a step forward in the integrative design of future multi-objective and multi-functional materials.
基金supported by National Natural Science Foundation of China(No.62171445)。
文摘Directional modulation(DM)is one of the most promising secure communication techniques.However,when the eavesdropper is co-located with the legitimate receiver,the conventional DM has the disadvantages of weak anti-scanning capability,anti-deciphering capability,and low secrecy rate.In response to these problems,we propose a twodimensional multi-term weighted fractional Fourier transform aided DM scheme,in which the legitimate receiver and the transmitter use different transform terms and transform orders to encrypt and decrypt the confidential information.In order to further lower the probability of being deciphered by an eavesdropper,we use the subblock partition method to convert the one-dimensional modulated signal vector into a twodimensional signal matrix,increasing the confusion of the useful information.Numerical results demonstrate that the proposed DM scheme not only provides stronger anti-deciphering and anti-scanning capabilities but also improves the secrecy rate performance of the system.
基金Supported by the Scientific Research Foundation of Graduate School of Zhengzhou Universitythe Natural Science Research Foundation of Henan Provincial Department of Science and Technology under Grant No. 112300410151
文摘Using Langevin simulations, we study numerically the directional mode-locking of the dynamics of two- dimensional superpararnagnetic colloidal system in a periodic pinning array. When the colloidal particles are initially commensurate with the pinning sites, there appear mode-locking steps in the average velocity of colloidal particles along certain directions of the external driving force. With an increase in the pinning strength, the width of the step increases linearly but the velocity at the step decreases parabolically.
文摘A fast separable approach based on a cross array is presented, which has coarsegrained parallelism. Its computational load is far less than that of the two-dimensional (2-D) direct processing method and other existing separable approaches. In order to compensate for the performance degradation due to separable processing, two postprocessing schemes are also proposed. Some computer simulation results are provided for illustration in the end.
基金supported by the National Natural Science Foundation of China(No.61401513)
文摘This paper proposes a novel algorithm for Two-Dimensional(2D) central Directionof-Arrival(DOA) estimation of incoherently distributed sources. In particular, an orthogonal array structure consisting of two Non-uniform Linear Arrays(NLAs) is considered. Based on first-order Taylor series approximation, the Generalized Array Manifold(GAM) model can first be established to separate the central DOAs from the original array manifold. Then, the Hadamard rotational invariance relationships inside the GAMs of two NLAs are identified. With the aid of such relationships, the central elevation and azimuth DOAs can be estimated through a search-free polynomial rooting method. Additionally, a simple parameter pairing of the estimated 2D angular parameters is also accomplished via the Hadamard rotational invariance relationship inside the GAM of the whole array. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao lower bound. The simulation results show that the proposed algorithm can achieve a remarkably higher precision at less complexity increment compared with the existing low-complexity methods, which benefits from the larger array aperture of the NLAs. Moreover, it requires no priori information about the angular distributed function.
基金the support from the National Natural Science Foundation of China(22272004,62272041)the Fundamental Research Funds for the Central Universities(YWF-22-L-1256)+1 种基金the National Key R&D Program of China(2023YFC3402600)the Beijing Institute of Technology Research Fund Program for Young Scholars(No.1870011182126)。
文摘The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.
基金supported by the National Natural Science Foundation of China(Grant No.52404155)State Key Laboratory of Mining Disaster Prevention and Control(Shandong University of Science and Technology)+1 种基金Ministry of Education(Grant No.JMDPC202402)supported by the opening project of State Key Laboratory of Explosion Science and Safety Protection(Beijing Institute of Technology).The opening project number is KFJJ24-20M.
文摘Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-based solid waste expanding agent.First,the mechanism of directional fracturing blasting by the IESF was analyzed,and the criterion of directional crack initiation was established.On this basis,laboratory experiments and numerical simulations were conducted to systematically evaluate the directional fracturing blasting performance of the IESF.The results indicate that the IESF presents an excellent directional fracturing effect,with average surface undulation differences ranging from 8.1 mm to 22.7 mm on the fracture surfaces.Moreover,during concrete fracturing tests,the stresses and strains in the fracturing direction are measured to be 2.16-3.71 times and 8 times larger than those in the nonfracturing direction,respectively.Finally,the IESF technique was implemented for no-pillar mining with gob-side entry retaining through roof cutting and pressure relief in an underground coal mine.The IESF technique effectively created directional cracks in the roof without causing severe roadway deformation,achieving an average cutting rate and maximum roadway deformation of 94%and 197 mm,respectively.These on-site test results verified its excellent directional rock fracturing performance.The IESF technique,which is safe,efficient,and green,has considerable application prospects in the field of rock mechanics and engineering.
基金supported by the National Key Research and Development Program of China(Grant No.2019YFA0705300)the National Natural Science Foundation of China(Grant No.51974057)the Fundamental Research Funds for the Central Universities。
文摘Columnar grains offer considerable advantages in terms of microstructure for resisting high-temperature low-cycle fatigue. In additive manufacturing, the formation of fine columnar grains is common. However, post-heat treatment often transforms these grains into equiaxed grains. This study aimed to tailor the grain morphology by controlling the precipitation of carbides. By balancing the restraining effects of carbide pinning and grain growth, we achieved carbide-assisted in situ-directional recrystallization. This process preserved the columnar grains created via laser powder bed fusion, even after high-temperature heat treatment. The approach emphasizes promoting the longitudinal growth of columnar grains while preventing their broadening. Additionally, we characterized the evolution of carbides and γ′ precipitates and examined their role in nucleation and growth during recrystallization. This study supports the viability of carbide-assisted in situ-directional recrystallization in additive manufacturing alloys, introducing an innovative strategy for microstructure customization. The implementation of carbon stabilization (CS) treatment to control the carbide distribution led to a 40 % improvement in the creep life at 900 ℃ and 150 MPa.
基金supported by the National Nat-ural Science Foundation of China(Nos.62174122,U2241244,and 52302046)Major Program(JD)of Hubei Province(No.2023BAA008)+2 种基金the Fundamental Research Funds for the Central Universities(Nos.2042023kf0116 and 2042023kf1041)the Guangdong Basic and Applied Basic Research Foundation(Nos.2024A1515011764 and 2024A1515010383)the Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration(Wuhan University)(No.EMPI2023016).
文摘The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface transfer doping,surface electron acceptor materials with high electron affinity(EA)are required to produce a high density of two-dimensional hole gas(2DHG)on the H-diamond subsurface.We have established ingenious theoretical models to demonstrate that even if these solid materials do not have a high EA value,they remain capable of absorbing electrons from the H-diamond surface by forming a negatively charged interface to act as a surface electron acceptor in the surface transfer doping model.Our calculations,particularly for the local density of states,provide compelling evidence that the effect of an interface with negative charges induces an upward band bending on the H-diamond side.Furthermore,the valence band maximum of the diamond atoms at the interface crosses the Fermi level,giving rise to strong surface transfer p-type doping.These results give a strong theoretical interpretation of the origin of 2DHG on H-diamond surfaces.The proposed guidelines contribute to further improvements in the performance of 2DHG H-diamond field effect transistors.
文摘A direct method to find the first integral for two-dimensional autonomous system in polar coordinates is suggested. It is shown that if the equation of motion expressed by differential 1-forms for a given autonomous Hamiltonian system is multiplied by a set of multiplicative functions, then the general expression of the first integral can be obtained, An example is given to illustrate the application of the results.
基金supported by the National Key Re-search and Development Program of China(No.2024YFC2816500)the National Natural Science Foundation of China(Nos.U2341261 and 52471121)the Fundamental Research Funds for the Cen-tral Universities(No.DUT24RC(3)107).
文摘Developing high-strength and ductile metallic parts with designable shapes is an unfading research topic for material science and engineering.As a revolutionary technology,additive manufacturing(AM)pro-vides a new pathway for producing complex-shaped metallic parts with the possibility of in situ tailoring their microstructure.However,AM is not always ideally applicable for all metals and alloys.Eutectic high entropy alloys(EHEAs)contain both the advantages of the eutectic alloys and high entropy alloys(HEAs),and EHEAs show significant potential in AM due to their excellent mechanical properties and good fluid-ity.Herein,heterogeneous and ultra-fine eutectic lamellar microstructure with directional growth along the deposition direction(DD)was obtained by adjusting the process parameters of AM to improve the strength and ductility of EHEAs.Compared with the as-cast sample,the simultaneous increment in both strength and ductility is achieved by AM.Combination of strength and ductility of the AM sample ten-sile along the DD direction(yield strength σ_(y)=1115 MPa,ultimate tensile strength σ_(UTS)=1417 MPa,ultimate tensile strain ε_(U)=23%)in this work was superior to most of the additive manufactured al-loys and comparable to the thermomechanical-treated EHEAs with the best mechanical properties.The high strength and good ductility of the AM were mainly attributed to the ultra-fine lamellar nature and fully constrained soft and hard lamellar microstructure,which produces an obvious hetero-deformation induced(HDI)strengthening and high crack buffering effect during the deformation.This work provides a new possibility to achieve high strength and ductile complex-shaped metallic parts via designing direc-tional lamellar eutectic structures by AM.
