In this paper, a computational model is constructed to investigate the phenomenon of the initial plasma formation and current transfer in the single-wire electrical explosion in a vacuum. The process of the single-wir...In this paper, a computational model is constructed to investigate the phenomenon of the initial plasma formation and current transfer in the single-wire electrical explosion in a vacuum. The process of the single-wire electrical explosion is divided into four stages. Stage Ⅰ： the wire is in solid state. Stage Ⅱ： the melting stage. Stage Ⅲ： the wire melts completely and the initial plasma forms. Stage IV： the core and corona expand separately. The thermodynamic calculation is applied before the wire melts completely in stages Ⅰ and Ⅱ. In stage Ⅲ, a one-dimensional magnetohydrodynamics model comes into play until the instant when the voltage collapse occurs. The temperature, density, and velocity, which are derived from the magnetohydrodynamics calculation, are averaged over the distribution area. The averaged parameters are taken as the initial conditions for stage Ⅳ in which a simplified magnetohydrodynamics model is applied. A wide-range semi-empirical equation of state, which is established based on the Thomas-Fermi-Kirzhnits model, is constructed to describe the phase transition from solid state to plasma state. The initial plasma formation and the phenomenon of current transfer in the electrical explosion of aluminum wire are investigated using the computational model. Experiments of electrical explosion of aluminum wires are carried out to verify this model. Simulation results are also compared with experimental results of the electrical explosion of copper wire.展开更多
The rate and cycling performances of the electrode materials are affected by many factors in a practical complicated electrode process. Learning about the limiting step in a practical electrochemical reaction is very ...The rate and cycling performances of the electrode materials are affected by many factors in a practical complicated electrode process. Learning about the limiting step in a practical electrochemical reaction is very important to effectively improve the electrochemical performances of the electrode materials. Li4Ti5O12, as a zero-strain material, has been considered as a promising anode material for long life Li-ion batteries. In this study, our results show that the Li4Ti5O12 pasted on Cu or graphite felt current collector exhibits unexpectedly higher rate performance than on A1 current collector. For Li4Ti5O12, the electron transfer between current collector and active material is the critical factor that affects its rate and cycling performances.展开更多
A simulation system used in the arc welding short circuit transfer process and current waveform control process was developed in this paper. The simulation results are basically consistent with welding technical exper...A simulation system used in the arc welding short circuit transfer process and current waveform control process was developed in this paper. The simulation results are basically consistent with welding technical experiments. The simulation system can be used to simulate and test the current waveform control parameters with welding variables. By this simulation system, the influence regularities of the current waveform control parameters in the CO 2 arc welding droplet short circuit transfer process can be got. Moreover, the basic mode of real time current waveform control can be also established by the simulation testing.展开更多
The aim of the paper is to investigate the effect of heat and mass transfer on the unsteady magnetohydrodynamic free convective flow with Hall current, heat source, and viscous dissipation. The problem is governed by ...The aim of the paper is to investigate the effect of heat and mass transfer on the unsteady magnetohydrodynamic free convective flow with Hall current, heat source, and viscous dissipation. The problem is governed by the system of coupled non-linear partial differential equations whose exact solution is difficult to obtain. Therefore, the problem is solved by using the Galerkin finite element method. The effects of the various parameters like Hall current, Eckert number, heat source parameter, Prandtl number, and Schmidt number on the velocity components, the temperature, and the concentration are also examined through graphs.展开更多
The present numerically study investigates the influence of the Hall current and constant heat flux on the Magneto hydrodynamic (MHD) natural convection boundary layer viscous incompressible fluid flow in the manifest...The present numerically study investigates the influence of the Hall current and constant heat flux on the Magneto hydrodynamic (MHD) natural convection boundary layer viscous incompressible fluid flow in the manifestation of transverse magnetic field near an inclined vertical permeable flat plate. It is assumed that the induced magnetic field is negligible compared with the imposed magnetic field. The governing boundary layer equations have been transferred into non-similar model by implementing similarity approaches. The physical dimensionless parameter has been set up into the model as Prandtl number, Eckert number, Magnetic parameter, Schmidt number, local Grashof number and local modified Grashof number. The numerical method of Nactsheim-Swigert shooting iteration technique together with Runge-Kutta six order iteration scheme has been used to solve the system of governing non-similar equations. The physical effects of the various parameters on dimensionless primary velocity profile, secondary velocity profile, and temperature and concentration profile are discussed graphically. Moreover, the local skin friction coefficient, the local Nusselt number and Sherwood number are shown in tabular form for various values of the parameters.展开更多
To investigate the affect of direct current electric field (DCEF) on the interfacial phase,in this paper,a hydrophobic ionic liquid (HIL)/water as liquid-liquid two-phase binary system is established by using the deio...To investigate the affect of direct current electric field (DCEF) on the interfacial phase,in this paper,a hydrophobic ionic liquid (HIL)/water as liquid-liquid two-phase binary system is established by using the deioned water and l-butyl-3-methyl imidazolium hexafluorophosphate,and the topographies of the HIL nanodroplets and nanolayers in ambient water are observed by atomic force microscope (AFM).The results show the AFM exerting the DCEF can enhance the intersolubility of the HIL/water binary system and induce their interfacial phase transfer.展开更多
Direct-current transfer characteristics of （InGaN）/A1GaN/A1N/GaN heterojunction field effect transistors （HFETs） are presented. A drain current plateau （IDs = 32.0 mA/mm） for Vcs swept from ＋0.7 V to -0. 6 V is...Direct-current transfer characteristics of （InGaN）/A1GaN/A1N/GaN heterojunction field effect transistors （HFETs） are presented. A drain current plateau （IDs = 32.0 mA/mm） for Vcs swept from ＋0.7 V to -0. 6 V is present in the transfer characteristics of InGaN/AIGaN/AIN/GaN HFETs. The theoretical calculation shows the coexistence of two-dimensional electron gas （2DEG） and two-dimensional hole gas （2DHG） in InGaN/AIGaN/A1N/GaN heterostructures, and the screening effect of 2DHG to the 2DEG in the conduction channel can explain this current plateau. Moreover, the current plateau shows the time-dependent behavior when IDs Vcs scans repeated are conducted. The obtained insight provides indication for the design in the fabrication of GaN-based super HFETs.展开更多
A visible rectification effect on the current-voltage curves of metal/porous silicon/p-silicon has been observed by current-sensing atomic force microscopy. The current-voltage curves of porous silicon membranes with ...A visible rectification effect on the current-voltage curves of metal/porous silicon/p-silicon has been observed by current-sensing atomic force microscopy. The current-voltage curves of porous silicon membranes with different porosities, prepared through variation of etching current density for a constant time, indicate that a higher porosity results in a higher resistance and thus a lower rectification, until the current reaches a threshold at a porosity 〉55%. We propose that the conductance mode in the porous silicon membrane with porosities 〉55% is mainly a hopping mechanism between nano-crystallites and an inverse static electric field between the porous silicon and p-Si interface blocks the electron injection from porous silicon to p-Si, but with porosities ≤55%, electron flows through a direct continuous channel between nano-crystallites.展开更多
Effects of Hall current on heat transfer and magnetohydrodynamic (MHD) boundary layer flow induced by a continuous surface in a parallel free stream of a second-order viscoelastic fluid are studied for uniform suction...Effects of Hall current on heat transfer and magnetohydrodynamic (MHD) boundary layer flow induced by a continuous surface in a parallel free stream of a second-order viscoelastic fluid are studied for uniform suction/injection by taking viscous dissipation into account. Complex nonsimilar solutions to the stream function and temperature are developed by means of an elegant technique, known as homotopy analysis method (HAM). Convergence of the solutions is ensured with the help of -curves. Graphical and tabular results for the effects of Hall current reveal that it has a significant influence on: complex velocity, complex temperature, magnitude of the shear stress at the surface, magnitude of the rate of heat transfer at the surface and on boundary layer thickness.展开更多
This paper systematically analyzes the transfer characteristics of the Rogowski-coil Current Transformer and its effect on protective relaying through theoretical analysis, experiments and simulations. The frequency c...This paper systematically analyzes the transfer characteristics of the Rogowski-coil Current Transformer and its effect on protective relaying through theoretical analysis, experiments and simulations. The frequency characteristics and transient characteristics of Rogowski transducer and Rogowski-coil Current Transformer are deeply analyzed based on the physical structure of the transformer.?It is revealed that broad bandwidth of the transformer can improve the performance of protective relaying, and the bandwidth is determined mainly by the parameters of the Rogowski transducer and signal processing circuits. It is also discovered that the measurement errors of transient current mainly depend on the abilities for the current transformer to reproduce an accurate replica of the decaying dc components, which is mainly decided by the decay time constant of the aperiodic component of transient current and the parameters of the integral unit. Finally, some measures are proposed for the performance improvement of Rogowski-coil Current Transformer to meet the requirements of protective relaying system in terms of structural design and testing standards.展开更多
A mathematical model is presented to describe transient behavior of heat transfer and fluid flow in stationary pulsed current tungsten inert gas (PC-TIG) weld pool, which considers three kinds of driving, forces for w...A mathematical model is presented to describe transient behavior of heat transfer and fluid flow in stationary pulsed current tungsten inert gas (PC-TIG) weld pool, which considers three kinds of driving, forces for weld pool convection, i,e. buoyancyforce, electromagnetic force and surface tension force. furthermore. the effect of vaporization heat flux at the free surface of weld pool and the temperature coefficient of surface tenston which is a function of temperatuer and composition are considered in the model In order to accelerate the convergence of iteration the AST(additive source term)method which concerns with the thermal energv boundary conditions is extended successfully to deal with the momentum boundary conditions by which the transient momentum equation and energy equation are mutually coupled. At the same time. ADI (Alternating direction implicit) method and DBC (double blocks correction) technque are employed to solve the finite difference equations. The results of numerical simulation demonstrate the transient behavior of PC-TIG weld pool, as well as the periodic variation of fluid flow and heat transfer with the periodic variation of welding current in stationary PC-TIG weld pool. The theoretical predictions based on this model are, shown to be in good accordance with the experimental measurements.展开更多
The variation in arc characteristics and behavior of metal transfer with the change in pulse parameters has been studied by high speed video camera during pulse current flux-cored arc weld deposition.A comparative stu...The variation in arc characteristics and behavior of metal transfer with the change in pulse parameters has been studied by high speed video camera during pulse current flux-cored arc weld deposition.A comparative study of similar nature has also been carried out during flux-cored arc weld deposition in globular and spray transfer modes.The effect of pulse parameters has been studied by considering their mean current and arc voltage.The arc characteristics studied by its root diameter,projected diameter and length,and the behavior of metal transfer noted by the metal transfer model and the droplet diameter have been found to vary significantly with the pulse parameters.The observation may help in understanding the arc characteristics with respect to the variation in pulse parameters which may be beneficial in using pulse current FCAW to produce desired weld quality.展开更多
旋转磁场感应式双能道无线电能传输(wireless power transfer,WPT)系统可对用电设备进行宽空间范围和高自由度的电能输送。旋转磁场耦合机构的同侧及交叉互感在双能道WPT系统引起耦合环流,该环流关系到谐振电路的参数配置及双能道传输...旋转磁场感应式双能道无线电能传输(wireless power transfer,WPT)系统可对用电设备进行宽空间范围和高自由度的电能输送。旋转磁场耦合机构的同侧及交叉互感在双能道WPT系统引起耦合环流,该环流关系到谐振电路的参数配置及双能道传输功率的平衡度,环流与传能电流的幅相关系还对系统输出功率产生影响。该文建立计及同侧耦合互感的双能道WPT系统模型,分析环流的耦合路径并推导传能电流与环流的表达式,揭示环流的组成分量及其形成机理。据此,提出一种计及环流作用的谐振电路参数配置方法,给出了环流各分量对两路能道传输功率的作用规律,推导双能道输入功率的平衡条件及系统输出零功率的临界条件。仿真与实验结果验证所提耦合环流分布规律及系统传输特性分析结果的正确性。展开更多
针对水下无线电能传输(underwater wireless power transfer,UWPT)系统中涡流损耗对系统传输效率的制约作用,文中提出一种利用接收端阻抗调控进行效率优化的控制策略。通过构建UWPT系统传输效率的数学模型,得到系统最大效率条件,发现UWP...针对水下无线电能传输(underwater wireless power transfer,UWPT)系统中涡流损耗对系统传输效率的制约作用,文中提出一种利用接收端阻抗调控进行效率优化的控制策略。通过构建UWPT系统传输效率的数学模型,得到系统最大效率条件,发现UWPT系统效率与负载电抗存在强耦合关系;基于“功率优先、效率次优”的原则,利用有源整流保持输出功率稳定为首要控制目标;通过引入辅助H桥并和有源整流器进行协同控制,以副边回路电流相位为调控变量,进行涡流抑制和效率提升。提出辅助H桥和有源整流器的协同控制方法,实现系统阻抗匹配与输出控制双重目标;搭建787 W的实验样机进行验证,实验结果表明:相较于传统LCC-S补偿,所提方法在额定工况下传输效率提升1.58%,对其进行损耗分布分析发现,涡流损耗占比由初始的82.8%降至71.1%,验证了所提协同控制策略在涡流损耗抑制方面的有效性。展开更多
基金Project supported by the National Science Foundation of China(Grant Nos.51322706,51237006,and 51325705)the Program for New Century Excellent Talents in University,China(Grant No.NCET-11-0428)the Fundamental Research Funds for the Central Universities,China
文摘In this paper, a computational model is constructed to investigate the phenomenon of the initial plasma formation and current transfer in the single-wire electrical explosion in a vacuum. The process of the single-wire electrical explosion is divided into four stages. Stage Ⅰ： the wire is in solid state. Stage Ⅱ： the melting stage. Stage Ⅲ： the wire melts completely and the initial plasma forms. Stage IV： the core and corona expand separately. The thermodynamic calculation is applied before the wire melts completely in stages Ⅰ and Ⅱ. In stage Ⅲ, a one-dimensional magnetohydrodynamics model comes into play until the instant when the voltage collapse occurs. The temperature, density, and velocity, which are derived from the magnetohydrodynamics calculation, are averaged over the distribution area. The averaged parameters are taken as the initial conditions for stage Ⅳ in which a simplified magnetohydrodynamics model is applied. A wide-range semi-empirical equation of state, which is established based on the Thomas-Fermi-Kirzhnits model, is constructed to describe the phase transition from solid state to plasma state. The initial plasma formation and the phenomenon of current transfer in the electrical explosion of aluminum wire are investigated using the computational model. Experiments of electrical explosion of aluminum wires are carried out to verify this model. Simulation results are also compared with experimental results of the electrical explosion of copper wire.
基金supported by the "Hundred Talent Project" of the Chinese Academy of Sciencesthe National High Technology Research and Development Program of China(Grant No.2009AA033101)+3 种基金the National Basic Research Program of China(Grant Nos.2007CB936500 and 2010CB833102)the National Natural Science Foundation of China(Grant No.50972164)the Science and Technology Planning Project of Guangdong Province,China(Grant No.2010A090602001)the Knowledge Innovation Program of the Chinese Academy of Sciences(Grant No.KJCX2-YW-W26)
文摘The rate and cycling performances of the electrode materials are affected by many factors in a practical complicated electrode process. Learning about the limiting step in a practical electrochemical reaction is very important to effectively improve the electrochemical performances of the electrode materials. Li4Ti5O12, as a zero-strain material, has been considered as a promising anode material for long life Li-ion batteries. In this study, our results show that the Li4Ti5O12 pasted on Cu or graphite felt current collector exhibits unexpectedly higher rate performance than on A1 current collector. For Li4Ti5O12, the electron transfer between current collector and active material is the critical factor that affects its rate and cycling performances.
文摘A simulation system used in the arc welding short circuit transfer process and current waveform control process was developed in this paper. The simulation results are basically consistent with welding technical experiments. The simulation system can be used to simulate and test the current waveform control parameters with welding variables. By this simulation system, the influence regularities of the current waveform control parameters in the CO 2 arc welding droplet short circuit transfer process can be got. Moreover, the basic mode of real time current waveform control can be also established by the simulation testing.
基金supported by the University Grants Commission,New Delhi,India
文摘The aim of the paper is to investigate the effect of heat and mass transfer on the unsteady magnetohydrodynamic free convective flow with Hall current, heat source, and viscous dissipation. The problem is governed by the system of coupled non-linear partial differential equations whose exact solution is difficult to obtain. Therefore, the problem is solved by using the Galerkin finite element method. The effects of the various parameters like Hall current, Eckert number, heat source parameter, Prandtl number, and Schmidt number on the velocity components, the temperature, and the concentration are also examined through graphs.
文摘The present numerically study investigates the influence of the Hall current and constant heat flux on the Magneto hydrodynamic (MHD) natural convection boundary layer viscous incompressible fluid flow in the manifestation of transverse magnetic field near an inclined vertical permeable flat plate. It is assumed that the induced magnetic field is negligible compared with the imposed magnetic field. The governing boundary layer equations have been transferred into non-similar model by implementing similarity approaches. The physical dimensionless parameter has been set up into the model as Prandtl number, Eckert number, Magnetic parameter, Schmidt number, local Grashof number and local modified Grashof number. The numerical method of Nactsheim-Swigert shooting iteration technique together with Runge-Kutta six order iteration scheme has been used to solve the system of governing non-similar equations. The physical effects of the various parameters on dimensionless primary velocity profile, secondary velocity profile, and temperature and concentration profile are discussed graphically. Moreover, the local skin friction coefficient, the local Nusselt number and Sherwood number are shown in tabular form for various values of the parameters.
基金Supported by the National Basic Research Program of China (973 Program No. 2007CB936000)the National Natural Science Foundation of China(No.10874198,90923002,21073222 and 10975175,No. 10874030)the Chinese Academy of Sciences (No. KJCX2-EW-N03)
文摘To investigate the affect of direct current electric field (DCEF) on the interfacial phase,in this paper,a hydrophobic ionic liquid (HIL)/water as liquid-liquid two-phase binary system is established by using the deioned water and l-butyl-3-methyl imidazolium hexafluorophosphate,and the topographies of the HIL nanodroplets and nanolayers in ambient water are observed by atomic force microscope (AFM).The results show the AFM exerting the DCEF can enhance the intersolubility of the HIL/water binary system and induce their interfacial phase transfer.
基金Supported by the Knowledge Innovation Project of the Chinese Academy of Sciencesthe National Natural Science Foundation of China under Grant Nos 61204017 and 61334002+1 种基金the National Basic Research Program of Chinathe National Science and Technology Major Project of China
文摘Direct-current transfer characteristics of （InGaN）/A1GaN/A1N/GaN heterojunction field effect transistors （HFETs） are presented. A drain current plateau （IDs = 32.0 mA/mm） for Vcs swept from ＋0.7 V to -0. 6 V is present in the transfer characteristics of InGaN/AIGaN/AIN/GaN HFETs. The theoretical calculation shows the coexistence of two-dimensional electron gas （2DEG） and two-dimensional hole gas （2DHG） in InGaN/AIGaN/A1N/GaN heterostructures, and the screening effect of 2DHG to the 2DEG in the conduction channel can explain this current plateau. Moreover, the current plateau shows the time-dependent behavior when IDs Vcs scans repeated are conducted. The obtained insight provides indication for the design in the fabrication of GaN-based super HFETs.
文摘A visible rectification effect on the current-voltage curves of metal/porous silicon/p-silicon has been observed by current-sensing atomic force microscopy. The current-voltage curves of porous silicon membranes with different porosities, prepared through variation of etching current density for a constant time, indicate that a higher porosity results in a higher resistance and thus a lower rectification, until the current reaches a threshold at a porosity 〉55%. We propose that the conductance mode in the porous silicon membrane with porosities 〉55% is mainly a hopping mechanism between nano-crystallites and an inverse static electric field between the porous silicon and p-Si interface blocks the electron injection from porous silicon to p-Si, but with porosities ≤55%, electron flows through a direct continuous channel between nano-crystallites.
文摘Effects of Hall current on heat transfer and magnetohydrodynamic (MHD) boundary layer flow induced by a continuous surface in a parallel free stream of a second-order viscoelastic fluid are studied for uniform suction/injection by taking viscous dissipation into account. Complex nonsimilar solutions to the stream function and temperature are developed by means of an elegant technique, known as homotopy analysis method (HAM). Convergence of the solutions is ensured with the help of -curves. Graphical and tabular results for the effects of Hall current reveal that it has a significant influence on: complex velocity, complex temperature, magnitude of the shear stress at the surface, magnitude of the rate of heat transfer at the surface and on boundary layer thickness.
文摘This paper systematically analyzes the transfer characteristics of the Rogowski-coil Current Transformer and its effect on protective relaying through theoretical analysis, experiments and simulations. The frequency characteristics and transient characteristics of Rogowski transducer and Rogowski-coil Current Transformer are deeply analyzed based on the physical structure of the transformer.?It is revealed that broad bandwidth of the transformer can improve the performance of protective relaying, and the bandwidth is determined mainly by the parameters of the Rogowski transducer and signal processing circuits. It is also discovered that the measurement errors of transient current mainly depend on the abilities for the current transformer to reproduce an accurate replica of the decaying dc components, which is mainly decided by the decay time constant of the aperiodic component of transient current and the parameters of the integral unit. Finally, some measures are proposed for the performance improvement of Rogowski-coil Current Transformer to meet the requirements of protective relaying system in terms of structural design and testing standards.
文摘A mathematical model is presented to describe transient behavior of heat transfer and fluid flow in stationary pulsed current tungsten inert gas (PC-TIG) weld pool, which considers three kinds of driving, forces for weld pool convection, i,e. buoyancyforce, electromagnetic force and surface tension force. furthermore. the effect of vaporization heat flux at the free surface of weld pool and the temperature coefficient of surface tenston which is a function of temperatuer and composition are considered in the model In order to accelerate the convergence of iteration the AST(additive source term)method which concerns with the thermal energv boundary conditions is extended successfully to deal with the momentum boundary conditions by which the transient momentum equation and energy equation are mutually coupled. At the same time. ADI (Alternating direction implicit) method and DBC (double blocks correction) technque are employed to solve the finite difference equations. The results of numerical simulation demonstrate the transient behavior of PC-TIG weld pool, as well as the periodic variation of fluid flow and heat transfer with the periodic variation of welding current in stationary PC-TIG weld pool. The theoretical predictions based on this model are, shown to be in good accordance with the experimental measurements.
文摘The variation in arc characteristics and behavior of metal transfer with the change in pulse parameters has been studied by high speed video camera during pulse current flux-cored arc weld deposition.A comparative study of similar nature has also been carried out during flux-cored arc weld deposition in globular and spray transfer modes.The effect of pulse parameters has been studied by considering their mean current and arc voltage.The arc characteristics studied by its root diameter,projected diameter and length,and the behavior of metal transfer noted by the metal transfer model and the droplet diameter have been found to vary significantly with the pulse parameters.The observation may help in understanding the arc characteristics with respect to the variation in pulse parameters which may be beneficial in using pulse current FCAW to produce desired weld quality.
文摘旋转磁场感应式双能道无线电能传输(wireless power transfer,WPT)系统可对用电设备进行宽空间范围和高自由度的电能输送。旋转磁场耦合机构的同侧及交叉互感在双能道WPT系统引起耦合环流,该环流关系到谐振电路的参数配置及双能道传输功率的平衡度,环流与传能电流的幅相关系还对系统输出功率产生影响。该文建立计及同侧耦合互感的双能道WPT系统模型,分析环流的耦合路径并推导传能电流与环流的表达式,揭示环流的组成分量及其形成机理。据此,提出一种计及环流作用的谐振电路参数配置方法,给出了环流各分量对两路能道传输功率的作用规律,推导双能道输入功率的平衡条件及系统输出零功率的临界条件。仿真与实验结果验证所提耦合环流分布规律及系统传输特性分析结果的正确性。
文摘针对水下无线电能传输(underwater wireless power transfer,UWPT)系统中涡流损耗对系统传输效率的制约作用,文中提出一种利用接收端阻抗调控进行效率优化的控制策略。通过构建UWPT系统传输效率的数学模型,得到系统最大效率条件,发现UWPT系统效率与负载电抗存在强耦合关系;基于“功率优先、效率次优”的原则,利用有源整流保持输出功率稳定为首要控制目标;通过引入辅助H桥并和有源整流器进行协同控制,以副边回路电流相位为调控变量,进行涡流抑制和效率提升。提出辅助H桥和有源整流器的协同控制方法,实现系统阻抗匹配与输出控制双重目标;搭建787 W的实验样机进行验证,实验结果表明:相较于传统LCC-S补偿,所提方法在额定工况下传输效率提升1.58%,对其进行损耗分布分析发现,涡流损耗占比由初始的82.8%降至71.1%,验证了所提协同控制策略在涡流损耗抑制方面的有效性。
