Turning mechanism is important assemblies for tracked vehicles. Turning performance is important evaluating indicator. The performance of the turning mechanism directly affect the mobility and productivity of the craw...Turning mechanism is important assemblies for tracked vehicles. Turning performance is important evaluating indicator. The performance of the turning mechanism directly affect the mobility and productivity of the crawler. However, there are still some problems crying out for solutions in superior turning mechanism for vehicle engineering area. Composition and performance of turning system in agricultural tracked vehicles matched with twin driving differential turning mechanism was introduced, which adopted quiet hydraulic double pumps and double motors, took advantage of flexibility greatly for track vehicle turning and benefit for handling used steering wheel.展开更多
In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existi...In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.展开更多
The distribution of track tension on track link is complex when the tracked vehicles run at a high speed.A multi-drive track link structure,which changes the traditional induction wheel into the driving wheel was prop...The distribution of track tension on track link is complex when the tracked vehicles run at a high speed.A multi-drive track link structure,which changes the traditional induction wheel into the driving wheel was proposed.The mathematical model of the system was established and the distribution of track tension was studied.The combined simulation model of RecurDyn and Simulink of the structure with multi-drive track was established.The simulation results show that our proposed structure has more uniform tension distribution than traditional structures,especially under the high speed condition.The maximum tension can be reduced by 28 kN-36 kN and the transmission efficiency can be improved by10%-16% under high speed condition with this new structure.展开更多
A scheme of fuzzy logic control for the suspension system of a tracked vehicle is presented. A mechanical model for the whole body of a tracked vehicle, which is totally a fifteen-degree-of-freedom system, is establis...A scheme of fuzzy logic control for the suspension system of a tracked vehicle is presented. A mechanical model for the whole body of a tracked vehicle, which is totally a fifteen-degree-of-freedom system, is established. The model includes the vertical motion, the pitch motion as well as the roll motion of the tracked vehicle. In contrast to most previous studies, the coupling effect among the vertical, the pitch and the roll motions of the suspension system of a tracked vehicle is considered simultaneously. The simulation of fuzzy logic control under road surface with random excitation shows that the acceleration, pitch angle and roll angle of suspension system can be efficiently controlled.展开更多
To solve the problem of power distribution for hybrid tracked vehicles （HTV）, a supervi- sory control strategy is proposed. Firstly, power system integration is analyzed and modeled. Then the control algorithm is gi...To solve the problem of power distribution for hybrid tracked vehicles （HTV）, a supervi- sory control strategy is proposed. Firstly, power system integration is analyzed and modeled. Then the control algorithm is given. Two fuzzy logics are used to realize the coordination control over each power unit. One controls power distribution based on the load power and battery state of charge （SOC）. The other manage the power during regenerating braking. To validate the presented control strategy, a ＂driver and controller＂ in the loop simulation platform is built based on dSPACE system and real-time simulation is made. The simulation results show that the strategy presented can solve the power distribution problem of hybrid tracked vehicles correctly and effectively.展开更多
Four-Wheel Independent Steering(4WIS)Vehicles can independently control the angle of each wheel,demonstrating superior trajectory tracking performance under normal conditions.However,on intermittent icy and snowy road...Four-Wheel Independent Steering(4WIS)Vehicles can independently control the angle of each wheel,demonstrating superior trajectory tracking performance under normal conditions.However,on intermittent icy and snowy roads,the presence of time-varying adhesion coefficients,time-varying cornering stiffness,and the irregularities due to ice and snow accumulation introduce multiple uncertainties into the steering system,significantly degrading the trajectory tracking performance of 4WIS vehicles.In response,this paper proposes a robust Tube Model Predictive Control(Tube-MPC)trajectory tracking control method for 4WIS.In this method,a Bi-directional Long Short-Term Memory neural network is established for online estimation of tire cornering stiffness under different road adhesion coefficients,providing accurate estimation of time-varying cornering stiffness for each wheel to mitigate the uncertainties of time-varying adhesion coefficients and cornering stiffness.Additionally,considering the road irregularities caused by snow accumulation on intermittent icy and snowy roads,a trajectory tracking controller that integrates Tube-MPC and robust Sliding Mode Control is proposed.The nominal MPC model,developed from the estimated tire cornering stiffness,utilizes the sliding surface and the optimal auxiliary control unit law for the tube is derived from the reaching law in Tube-MPC,aiming to minimize the trajectory tracking error while enhancing the controller’s robustness against road uncertainties.The experiments show that the proposed method outperforms the Tube-MPC algorithm in terms of trajectory accuracy and robustness.This method demonstrates excellent trajectory tracking accuracy under intermittent icy and snowy road conditions,and it lays a theoretical foundation for future studies on vehicle stability and trajectory tracking under such road conditions.展开更多
The hybrid tracked vehicles(HTV)usually adopt series hybrid powertrain with extra steering mechanism,which has relatively low transmission efficiency and reduces the flexibility of structural arrangement.To overcome t...The hybrid tracked vehicles(HTV)usually adopt series hybrid powertrain with extra steering mechanism,which has relatively low transmission efficiency and reduces the flexibility of structural arrangement.To overcome the disadvantages,a new kind of single-mode powertrain has been proposed.The power-split hybrid powertrain is composed of three planetary gear(PG)sets connected to one engine,left and right track outputs,and three motors.The proposed powertrain can realize steering while going forward by controlling the output torque on each side without extra steering mechanism or steering shaft.Due to the diversity of the connection way between components and planetary gear sets,a rapid configuration design approach is proposed for the design selection of HTV.The automated dynamic modelling method can show the one-to-one correspondence with the selected feasible groups by establishing two characteristic matrices,which is more simple than other researches.The analytically-based method is proposed to classify all possible connection designs into several groups to decrease the searching scope with improved design efficiency.Finally,the optimal control strategy is used to find the design with optimal fuel economy under typical condition of HTV.The case study is implemented by the proposed design approach which demonstrates better design performances compared with the existing series-hybrid HTV.展开更多
To better understand characteristics of seismic signals of tracked vehicles measured when passing a sensor line,we numerically modelled force-pulse responses of a layered soil that is similar in its seismic properties...To better understand characteristics of seismic signals of tracked vehicles measured when passing a sensor line,we numerically modelled force-pulse responses of a layered soil that is similar in its seismic properties to that found at the original measurement site.The vertical-force pulses from the road wheels rolling over the track elements are fitted to the measured ones.Single-pulse seismic waves vary with distance due to diff erent wave types,refl ections at layer boundaries,vehicle velocity and relative position of the left and right track elements.They are computed by a modelling program and superposed at sensor positions with the appropriate slant distance and time shift for each track element.These sum signals are in qualitative agreement with those from the original measurements.However,they are several magnitudes weaker and much smoother.Furthermore,higher frequencies are damped much less at larger distances.Due to the large variability of the sum signals,recognition of tracked-vehicle types exclusively through their seismic signals seems diffi cult.展开更多
The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynam...The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynamic simulation. The obtained results have demonstrated that the simulation method has the advantage of high efficiency, more convenience and more insight into the dynamical behavior of the system.展开更多
In order to achieve precise,robust autonomous guidance and control of a tracked vehicle,a kinematic model with longitudinal and lateral slip is established,Four different nonlinear filters are used to estimate both st...In order to achieve precise,robust autonomous guidance and control of a tracked vehicle,a kinematic model with longitudinal and lateral slip is established,Four different nonlinear filters are used to estimate both state vector and time-varying parameter vector of the created model jointly.The first filter is the well-known extended Kalman filter.The second filter is an unscented version of the Kalman filter.The third one is a particle filter using the unscented Kalman filter to generate the importance proposal distribution.The last one is a novel and guaranteed filter that uses a linear set-membership estimator and can give an ellipsoid set in which the true state lies.The four different approaches have different complexities,behavior and advantages that are surveyed and compared.展开更多
Based on main physical and mechanical properties of deep-sea sediment from C-C poly-metallic nodule mining area in the Pacific Ocean, the best sediment simulant was successfully prepared by mixing bentonite with a cer...Based on main physical and mechanical properties of deep-sea sediment from C-C poly-metallic nodule mining area in the Pacific Ocean, the best sediment simulant was successfully prepared by mixing bentonite with a certain content of water. Compression-shear coupling rheological constitutive model of the sediment simulant was established by endochronic theory and the coupling rheological parameters were obtained by compressive and compression-shear creep tests. A new calculation formula of turning traction force of the tracked mining vehicle was first derived based on the coupling rheological model and consideration of pushing resistance and sinkage of the tracked mining vehicle. Effects of the turning velocity, crawler spacing and contacting length of crawler with deep-sea sediment on the turning traction force were analyzed. Research results can provide theoretical foundation for operation safety and optimal design of the tracked mining vehicle.展开更多
The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based ...The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based on soft deep-sea sediment from a C-C poly-metallic nodule mining area in the Pacific Ocean. Compressive creep tests and shear creep tests are combined to obtain compressive and shear rheological parameters to establish a combined compressive-shear rheological constitutive model and a compression-sinkage rheological constitutive model. The combined compression-shear rheological sinkage of the tracked mining vehicle at dif ferent speeds is calculated using the Recur Dyn software with a selfprogrammed subroutine to implement the combined compression-shear rheological constitutive model. The model results are compared with shear rheological sinkage and ordinary sinkage(without consideration of rheological properties). These results show that the combined compression-shear rheological constitutive model must be taken into account when calculating the sinkage of a tracked mining vehicle. The combined compression-shear rheological sinkage decrease with vehicle speed and is the largest among the three types of sinkage. The developed subroutine in the Recur Dyn software can be used to study the performance and structural optimization of moving tracked mining vehicles.展开更多
Based on the analysis of complex terrains and current forest transportation equipment,a forest tracked vehicle prototype LY1352 JP was developed.The road model and the virtual prototype of the chassis were constructed...Based on the analysis of complex terrains and current forest transportation equipment,a forest tracked vehicle prototype LY1352 JP was developed.The road model and the virtual prototype of the chassis were constructed using dynamic simulation software RecurDyn.The optimal tension of the vehicle as well as its capabilities for crossing trenches,climbing vertical walls,uphill and downhill slopes were simulated.The simulation results showed that the optimum tension force of the chassis of the vehicle was 63 kN(kilonewton),accounting for 45%of the total vehicle weight.The maximum trench crossing width and vertical obstacle climbing height were 1.35 m and 0.45 m,respectively.The maximum uphill and downhill angles were 50°and 45°,respectively.Tests on the prototype capacity for crossing trenches,and uphill and downhill driving were carried out.The test results were in agreement with the simulation results.A cross-country performance of a fire truck based on the tracked vehicle chassis was conducted in an old-growth forest.Tests verified that the vehicle has a strong forest trafficability performance and can meet the needs for forest transportation.展开更多
A study is presented on the dynamic analysis of a tracked vehicle for mining on the deep seabed of very soft soil. Equations for the interaction between the track and extremely soft seabed are employed to develop a tr...A study is presented on the dynamic analysis of a tracked vehicle for mining on the deep seabed of very soft soil. Equations for the interaction between the track and extremely soft seabed are employed to develop a track/soil interaction module called TVAS. The vehicle is modeled as a multibody dynamic system by the use of a multibody dynamic analysis program. The module developed is cooperated with the multibody dynamic analysis program with a user-defined subroutine. The dynamic behavior and the conceptual design of the mining vehicle on the deep seabed are investigated.展开更多
A neuron proportion integration (PI) control strategy for semi-active suspension system of tracked vehicle was proposed based on its unique structure and the multiple and complex environment of the driving traffic. An...A neuron proportion integration (PI) control strategy for semi-active suspension system of tracked vehicle was proposed based on its unique structure and the multiple and complex environment of the driving traffic. An adaptive genetic algorithm is used to optimize the parameters of the neuron PI controller. The simulation result of the neuron PI control for semi-active suspension system of tracked vehicle indicates that the vertical amplitude,pitch angle and vertical acceleration of the vehicle are well controlled. The root mean square (RMS) of the vertical amplitude decreases by 37.2%,and 45.2% for the pitch angle,38.6% for the vertical acceleration. The research of neuron PI control experiment for the semi-active suspension system of the tracked vehicle model mining in benthal indicates that the RMS of the weight acceleration vibrating along the vertical direction decreases by 29.5%,the power spectral density resonance peak of the acceleration of the car body decreases by 23.8%.展开更多
Steering control strategy for high-speed tracked vehicle with hydrostatic drive is designed based on analyzing the fundamental steering theories of the hydrostatic drive tracked vehicle. The strategy is completed by t...Steering control strategy for high-speed tracked vehicle with hydrostatic drive is designed based on analyzing the fundamental steering theories of the hydrostatic drive tracked vehicle. The strategy is completed by the cooperation between integrated steering control unit and pump ＆ motor displacement controller. The steering simulation is conducted by using Simulink of Matlab. It is indicated that this steering control strategy can reduce the average vehicle speed automatically to achieve the driver＇s expected steering radius exactly in the case of en- suring not exceeding the system pressure threshold and no sideslip.展开更多
The bentonite-water mixture was selected as the substitute of seabed sediments according to the in-situ measurement data of sediments 15-20 cm deep in China's ocean poly-metallic mining contract area and the soft ...The bentonite-water mixture was selected as the substitute of seabed sediments according to the in-situ measurement data of sediments 15-20 cm deep in China's ocean poly-metallic mining contract area and the soft seabed sediments could be simulated with certain proportion of the bentonite and water; besides, based on the theory on the interaction between the vehicle and ground and referenced to Bekker's apparatus and related experimental methods, a scenario on the experimental system of the pressure-sinkage characteristics of interaction between the track of tracked vehicle and soft seabed sediments was designed. The pressure-sinkage experiments were performed with different dimensions of penetration plates. The "pressure-sinkage" model based on Bekker's formula and correlation parameters were obtained to describe the corresponding characteristics of the seabed sediments and a smart calibration model on the pressure-sinkage characteristic of the track was established based on the function chain neural network, which could provide boundary loading conditions for simulation analysis of the tracked vehicle moving on the seabed.展开更多
In the steering process of tracked vehicle with hydrostatic drive,the motion and resistance states of the vehicle are always of uncertain and nonlinear characteristics,and these states may undergoe large-scale changes...In the steering process of tracked vehicle with hydrostatic drive,the motion and resistance states of the vehicle are always of uncertain and nonlinear characteristics,and these states may undergoe large-scale changes.Therefore,it is significant to enhance the steering stability of tracked vehicle with hydrostatic drive to meet the need of future battlefield.In this paper,a sliding mode control algorithm is proposed and applied to achieve desired yaw rates.The speed controller and the yaw rate controller are designed through the kinematics and dynamics analysis.In addition,the nonlinear derivative and integral sliding mode control algorithm is designed,which is supposed to efficiently reduce the integration saturation and the disturbances from the unsmooth road surfaces through a conditional integrator approach.Moreover,it improves the response speed of the system and reduces the chattering by the derivative controller.The hydrostatic tracked vehicle module is modeled with a multi-body dynamic software RecurDyn and the steering control strategy module is modeled by MATLAB/Simulink.The co-simulation results of the whole model show that the control strategy can improve the vehicle steering response speed and also ensure a smooth control output with small chattering and strong robustness.展开更多
A new parameter identification method is proposed to solve the slippage problem when tracked mobile robots execute turning motions.Such motion is divided into two states in this paper:pivot turning and coupled turning...A new parameter identification method is proposed to solve the slippage problem when tracked mobile robots execute turning motions.Such motion is divided into two states in this paper:pivot turning and coupled turning between angular velocity and linear velocity.In the processing of pivot turning,the slippage parameters could be obtained by measuring the end point in a square path.In the process of coupled turning,the slippage parameters could be calculated by measuring the perimeter of a circular path and the linear distance between the start and end points.The identification results showed that slippage parameters were affected by velocity.Therefore,a fuzzy rule base was established with the basis on the identification data,and a fuzzy controller was applied to motion control and dead reckoning.This method effectively compensated for errors resulting in unequal tension between the left and right tracks,structural dimensions and slippage.The results demonstrated that the accuracy of robot positioning and control could be substantially improved on a rigid floor.展开更多
In order to improve the brake performance of a dual independent electric drive tracked vehicle,a dynamic model for braking situation was established.Then,a sliding model controller(SMC)with an auxiliary system was des...In order to improve the brake performance of a dual independent electric drive tracked vehicle,a dynamic model for braking situation was established.Then,a sliding model controller(SMC)with an auxiliary system was designed to control the slip and its effectiveness was proved.A hardware-in-loop simulation through MATLAB/XPC was compared with the normal SMC and normal integral sliding mode controller(ISMC),the results show that SMC with the auxiliary system has a better performance:a smaller overshoot and steady state error.The disturbance is suppressed effectively.In the initial speed of 65.km/h,the brake distance was shortened by 3.4%and 6.8%compared with the other two methods,respectively.Finally,initial speeds of 30-36.km/h tests was carried out on a flat soil road.Compared with a no-control brake,the displacement was shortened by 1.8.m.It demonstrates the effectiveness of the slip-control strategy.In the same situation,the error between the simulation and test is 18.1%,which validates the accuracy of models.展开更多
基金Supported by Postdoctoral Fund of Settling Down in Heilongjiang Province(LBH-Q06094)
文摘Turning mechanism is important assemblies for tracked vehicles. Turning performance is important evaluating indicator. The performance of the turning mechanism directly affect the mobility and productivity of the crawler. However, there are still some problems crying out for solutions in superior turning mechanism for vehicle engineering area. Composition and performance of turning system in agricultural tracked vehicles matched with twin driving differential turning mechanism was introduced, which adopted quiet hydraulic double pumps and double motors, took advantage of flexibility greatly for track vehicle turning and benefit for handling used steering wheel.
基金Supported by Defense Advanced Research Support Project(62301030303)111 Project(B08043)
文摘In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.
基金Supported by the National Natural Science Foundation of China(51475045)
文摘The distribution of track tension on track link is complex when the tracked vehicles run at a high speed.A multi-drive track link structure,which changes the traditional induction wheel into the driving wheel was proposed.The mathematical model of the system was established and the distribution of track tension was studied.The combined simulation model of RecurDyn and Simulink of the structure with multi-drive track was established.The simulation results show that our proposed structure has more uniform tension distribution than traditional structures,especially under the high speed condition.The maximum tension can be reduced by 28 kN-36 kN and the transmission efficiency can be improved by10%-16% under high speed condition with this new structure.
文摘A scheme of fuzzy logic control for the suspension system of a tracked vehicle is presented. A mechanical model for the whole body of a tracked vehicle, which is totally a fifteen-degree-of-freedom system, is established. The model includes the vertical motion, the pitch motion as well as the roll motion of the tracked vehicle. In contrast to most previous studies, the coupling effect among the vertical, the pitch and the roll motions of the suspension system of a tracked vehicle is considered simultaneously. The simulation of fuzzy logic control under road surface with random excitation shows that the acceleration, pitch angle and roll angle of suspension system can be efficiently controlled.
基金Supported by the National Natural Science Foundation of China ( 50975027 )the Fundamental Research Funds for the Central Universities( N110303007)
文摘To solve the problem of power distribution for hybrid tracked vehicles （HTV）, a supervi- sory control strategy is proposed. Firstly, power system integration is analyzed and modeled. Then the control algorithm is given. Two fuzzy logics are used to realize the coordination control over each power unit. One controls power distribution based on the load power and battery state of charge （SOC）. The other manage the power during regenerating braking. To validate the presented control strategy, a ＂driver and controller＂ in the loop simulation platform is built based on dSPACE system and real-time simulation is made. The simulation results show that the strategy presented can solve the power distribution problem of hybrid tracked vehicles correctly and effectively.
基金Supported by National Natural Science Foundation of China(Grant Nos.52405112,U24A20199)the Postdoctoral Fellowship Program of CPSF(Grant No.GZB20240973).
文摘Four-Wheel Independent Steering(4WIS)Vehicles can independently control the angle of each wheel,demonstrating superior trajectory tracking performance under normal conditions.However,on intermittent icy and snowy roads,the presence of time-varying adhesion coefficients,time-varying cornering stiffness,and the irregularities due to ice and snow accumulation introduce multiple uncertainties into the steering system,significantly degrading the trajectory tracking performance of 4WIS vehicles.In response,this paper proposes a robust Tube Model Predictive Control(Tube-MPC)trajectory tracking control method for 4WIS.In this method,a Bi-directional Long Short-Term Memory neural network is established for online estimation of tire cornering stiffness under different road adhesion coefficients,providing accurate estimation of time-varying cornering stiffness for each wheel to mitigate the uncertainties of time-varying adhesion coefficients and cornering stiffness.Additionally,considering the road irregularities caused by snow accumulation on intermittent icy and snowy roads,a trajectory tracking controller that integrates Tube-MPC and robust Sliding Mode Control is proposed.The nominal MPC model,developed from the estimated tire cornering stiffness,utilizes the sliding surface and the optimal auxiliary control unit law for the tube is derived from the reaching law in Tube-MPC,aiming to minimize the trajectory tracking error while enhancing the controller’s robustness against road uncertainties.The experiments show that the proposed method outperforms the Tube-MPC algorithm in terms of trajectory accuracy and robustness.This method demonstrates excellent trajectory tracking accuracy under intermittent icy and snowy road conditions,and it lays a theoretical foundation for future studies on vehicle stability and trajectory tracking under such road conditions.
基金Project(CIT&TCD20190304)supported by the Beijing Great Scholars Program,China。
文摘The hybrid tracked vehicles(HTV)usually adopt series hybrid powertrain with extra steering mechanism,which has relatively low transmission efficiency and reduces the flexibility of structural arrangement.To overcome the disadvantages,a new kind of single-mode powertrain has been proposed.The power-split hybrid powertrain is composed of three planetary gear(PG)sets connected to one engine,left and right track outputs,and three motors.The proposed powertrain can realize steering while going forward by controlling the output torque on each side without extra steering mechanism or steering shaft.Due to the diversity of the connection way between components and planetary gear sets,a rapid configuration design approach is proposed for the design selection of HTV.The automated dynamic modelling method can show the one-to-one correspondence with the selected feasible groups by establishing two characteristic matrices,which is more simple than other researches.The analytically-based method is proposed to classify all possible connection designs into several groups to decrease the searching scope with improved design efficiency.Finally,the optimal control strategy is used to find the design with optimal fuel economy under typical condition of HTV.The case study is implemented by the proposed design approach which demonstrates better design performances compared with the existing series-hybrid HTV.
文摘To better understand characteristics of seismic signals of tracked vehicles measured when passing a sensor line,we numerically modelled force-pulse responses of a layered soil that is similar in its seismic properties to that found at the original measurement site.The vertical-force pulses from the road wheels rolling over the track elements are fitted to the measured ones.Single-pulse seismic waves vary with distance due to diff erent wave types,refl ections at layer boundaries,vehicle velocity and relative position of the left and right track elements.They are computed by a modelling program and superposed at sensor positions with the appropriate slant distance and time shift for each track element.These sum signals are in qualitative agreement with those from the original measurements.However,they are several magnitudes weaker and much smoother.Furthermore,higher frequencies are damped much less at larger distances.Due to the large variability of the sum signals,recognition of tracked-vehicle types exclusively through their seismic signals seems diffi cult.
文摘The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynamic simulation. The obtained results have demonstrated that the simulation method has the advantage of high efficiency, more convenience and more insight into the dynamical behavior of the system.
基金This project is supported by National Hi-tech Research and Development Program of China(863 program,No.2006AA04Z215).
文摘In order to achieve precise,robust autonomous guidance and control of a tracked vehicle,a kinematic model with longitudinal and lateral slip is established,Four different nonlinear filters are used to estimate both state vector and time-varying parameter vector of the created model jointly.The first filter is the well-known extended Kalman filter.The second filter is an unscented version of the Kalman filter.The third one is a particle filter using the unscented Kalman filter to generate the importance proposal distribution.The last one is a novel and guaranteed filter that uses a linear set-membership estimator and can give an ellipsoid set in which the true state lies.The four different approaches have different complexities,behavior and advantages that are surveyed and compared.
基金Projects(51274251,11502226)supported by the National Natural Science Foundation of China
文摘Based on main physical and mechanical properties of deep-sea sediment from C-C poly-metallic nodule mining area in the Pacific Ocean, the best sediment simulant was successfully prepared by mixing bentonite with a certain content of water. Compression-shear coupling rheological constitutive model of the sediment simulant was established by endochronic theory and the coupling rheological parameters were obtained by compressive and compression-shear creep tests. A new calculation formula of turning traction force of the tracked mining vehicle was first derived based on the coupling rheological model and consideration of pushing resistance and sinkage of the tracked mining vehicle. Effects of the turning velocity, crawler spacing and contacting length of crawler with deep-sea sediment on the turning traction force were analyzed. Research results can provide theoretical foundation for operation safety and optimal design of the tracked mining vehicle.
基金Supported by the National Natural Science Foundation of China(Nos.51274251,11502226)
文摘The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based on soft deep-sea sediment from a C-C poly-metallic nodule mining area in the Pacific Ocean. Compressive creep tests and shear creep tests are combined to obtain compressive and shear rheological parameters to establish a combined compressive-shear rheological constitutive model and a compression-sinkage rheological constitutive model. The combined compression-shear rheological sinkage of the tracked mining vehicle at dif ferent speeds is calculated using the Recur Dyn software with a selfprogrammed subroutine to implement the combined compression-shear rheological constitutive model. The model results are compared with shear rheological sinkage and ordinary sinkage(without consideration of rheological properties). These results show that the combined compression-shear rheological constitutive model must be taken into account when calculating the sinkage of a tracked mining vehicle. The combined compression-shear rheological sinkage decrease with vehicle speed and is the largest among the three types of sinkage. The developed subroutine in the Recur Dyn software can be used to study the performance and structural optimization of moving tracked mining vehicles.
基金funded by the Fundamental Research Funds for the Central Universities(No.2572019BL02)the National Key Research and Development Program of China(No.2018YFD0600205)。
文摘Based on the analysis of complex terrains and current forest transportation equipment,a forest tracked vehicle prototype LY1352 JP was developed.The road model and the virtual prototype of the chassis were constructed using dynamic simulation software RecurDyn.The optimal tension of the vehicle as well as its capabilities for crossing trenches,climbing vertical walls,uphill and downhill slopes were simulated.The simulation results showed that the optimum tension force of the chassis of the vehicle was 63 kN(kilonewton),accounting for 45%of the total vehicle weight.The maximum trench crossing width and vertical obstacle climbing height were 1.35 m and 0.45 m,respectively.The maximum uphill and downhill angles were 50°and 45°,respectively.Tests on the prototype capacity for crossing trenches,and uphill and downhill driving were carried out.The test results were in agreement with the simulation results.A cross-country performance of a fire truck based on the tracked vehicle chassis was conducted in an old-growth forest.Tests verified that the vehicle has a strong forest trafficability performance and can meet the needs for forest transportation.
文摘A study is presented on the dynamic analysis of a tracked vehicle for mining on the deep seabed of very soft soil. Equations for the interaction between the track and extremely soft seabed are employed to develop a track/soil interaction module called TVAS. The vehicle is modeled as a multibody dynamic system by the use of a multibody dynamic analysis program. The module developed is cooperated with the multibody dynamic analysis program with a user-defined subroutine. The dynamic behavior and the conceptual design of the mining vehicle on the deep seabed are investigated.
基金Project(2010GK3091) supported by Industrial Support Project in Science and Technology of Hunan Province, ChinaProject(10B058) supported by Excellent Youth Foundation Subsidized Project of Hunan Provincial Education Department, China
文摘A neuron proportion integration (PI) control strategy for semi-active suspension system of tracked vehicle was proposed based on its unique structure and the multiple and complex environment of the driving traffic. An adaptive genetic algorithm is used to optimize the parameters of the neuron PI controller. The simulation result of the neuron PI control for semi-active suspension system of tracked vehicle indicates that the vertical amplitude,pitch angle and vertical acceleration of the vehicle are well controlled. The root mean square (RMS) of the vertical amplitude decreases by 37.2%,and 45.2% for the pitch angle,38.6% for the vertical acceleration. The research of neuron PI control experiment for the semi-active suspension system of the tracked vehicle model mining in benthal indicates that the RMS of the weight acceleration vibrating along the vertical direction decreases by 29.5%,the power spectral density resonance peak of the acceleration of the car body decreases by 23.8%.
基金Sponsored by the Ministerial Level Advanced Research Foundation(2630103)
文摘Steering control strategy for high-speed tracked vehicle with hydrostatic drive is designed based on analyzing the fundamental steering theories of the hydrostatic drive tracked vehicle. The strategy is completed by the cooperation between integrated steering control unit and pump ＆ motor displacement controller. The steering simulation is conducted by using Simulink of Matlab. It is indicated that this steering control strategy can reduce the average vehicle speed automatically to achieve the driver＇s expected steering radius exactly in the case of en- suring not exceeding the system pressure threshold and no sideslip.
基金Project(11JJ3059) supported by Natural Science Foundation of Hunan Province, ChinaProject(2010GK3091) supported by Science and Technology Industrial Support Program of Hunan Province, China+1 种基金Project(10B058) supported by Excellent Youth Foundation of Education Department of Hunan Province, ChinaProject(51105386) supported by the National Natural Science Foundation of China
文摘The bentonite-water mixture was selected as the substitute of seabed sediments according to the in-situ measurement data of sediments 15-20 cm deep in China's ocean poly-metallic mining contract area and the soft seabed sediments could be simulated with certain proportion of the bentonite and water; besides, based on the theory on the interaction between the vehicle and ground and referenced to Bekker's apparatus and related experimental methods, a scenario on the experimental system of the pressure-sinkage characteristics of interaction between the track of tracked vehicle and soft seabed sediments was designed. The pressure-sinkage experiments were performed with different dimensions of penetration plates. The "pressure-sinkage" model based on Bekker's formula and correlation parameters were obtained to describe the corresponding characteristics of the seabed sediments and a smart calibration model on the pressure-sinkage characteristic of the track was established based on the function chain neural network, which could provide boundary loading conditions for simulation analysis of the tracked vehicle moving on the seabed.
基金Supported by the National Natural Science Foundation of China(51475044)。
文摘In the steering process of tracked vehicle with hydrostatic drive,the motion and resistance states of the vehicle are always of uncertain and nonlinear characteristics,and these states may undergoe large-scale changes.Therefore,it is significant to enhance the steering stability of tracked vehicle with hydrostatic drive to meet the need of future battlefield.In this paper,a sliding mode control algorithm is proposed and applied to achieve desired yaw rates.The speed controller and the yaw rate controller are designed through the kinematics and dynamics analysis.In addition,the nonlinear derivative and integral sliding mode control algorithm is designed,which is supposed to efficiently reduce the integration saturation and the disturbances from the unsmooth road surfaces through a conditional integrator approach.Moreover,it improves the response speed of the system and reduces the chattering by the derivative controller.The hydrostatic tracked vehicle module is modeled with a multi-body dynamic software RecurDyn and the steering control strategy module is modeled by MATLAB/Simulink.The co-simulation results of the whole model show that the control strategy can improve the vehicle steering response speed and also ensure a smooth control output with small chattering and strong robustness.
文摘A new parameter identification method is proposed to solve the slippage problem when tracked mobile robots execute turning motions.Such motion is divided into two states in this paper:pivot turning and coupled turning between angular velocity and linear velocity.In the processing of pivot turning,the slippage parameters could be obtained by measuring the end point in a square path.In the process of coupled turning,the slippage parameters could be calculated by measuring the perimeter of a circular path and the linear distance between the start and end points.The identification results showed that slippage parameters were affected by velocity.Therefore,a fuzzy rule base was established with the basis on the identification data,and a fuzzy controller was applied to motion control and dead reckoning.This method effectively compensated for errors resulting in unequal tension between the left and right tracks,structural dimensions and slippage.The results demonstrated that the accuracy of robot positioning and control could be substantially improved on a rigid floor.
文摘In order to improve the brake performance of a dual independent electric drive tracked vehicle,a dynamic model for braking situation was established.Then,a sliding model controller(SMC)with an auxiliary system was designed to control the slip and its effectiveness was proved.A hardware-in-loop simulation through MATLAB/XPC was compared with the normal SMC and normal integral sliding mode controller(ISMC),the results show that SMC with the auxiliary system has a better performance:a smaller overshoot and steady state error.The disturbance is suppressed effectively.In the initial speed of 65.km/h,the brake distance was shortened by 3.4%and 6.8%compared with the other two methods,respectively.Finally,initial speeds of 30-36.km/h tests was carried out on a flat soil road.Compared with a no-control brake,the displacement was shortened by 1.8.m.It demonstrates the effectiveness of the slip-control strategy.In the same situation,the error between the simulation and test is 18.1%,which validates the accuracy of models.
