The dispersion relations of normal modes in the layered constructions are studied. In the frequency region with negative permittivity, we investigate the normal modes near the air-metal and the air-matematerial interf...The dispersion relations of normal modes in the layered constructions are studied. In the frequency region with negative permittivity, we investigate the normal modes near the air-metal and the air-matematerial interfaces and compare them. An extra bulk mode appearing in a pass band of two media is found near the air-matematerial interface, which is different from the air-metal case. Moreover, the bulk mode will be further proved by the attenuated total reflection （ATR） technique, in which the coupling between the incident electromagnetic waves and the normal modes is studied. For p-polarized incident waves, the ATR spectra based on the Otto and the Kretschmann configurations are obtained numerically, where the dips present the excitations of the surface and bulk modes. Furthermore, we also discuss the influences of the middle layer thickness, the incident angle and the damping term on the reflection in detail. It is found that the coupling frequencies and the maximum strength are strongly dependent on the above media parameters.展开更多
Simulation approach includes such processes as photon emissions from X-ray tube with a spectral distribution, total reflection on the sample support, photoelectric effect in thin layer sample, as well as characteristi...Simulation approach includes such processes as photon emissions from X-ray tube with a spectral distribution, total reflection on the sample support, photoelectric effect in thin layer sample, as well as characteristic line absorption and detection. The calculation results are in agreement with experimental ones.展开更多
The total internal reflection(TIR)behavior of interface shear waves is crucial for ensuring the reliability of dielectric elastomer(DE)devices.However,due to the complex force-electric coupling and large deformation o...The total internal reflection(TIR)behavior of interface shear waves is crucial for ensuring the reliability of dielectric elastomer(DE)devices.However,due to the complex force-electric coupling and large deformation of DEs,the TIR behavior of shear waves in heterogeneous force-electric interface models is still unclear.This study modeled an elastic/DE bi-material interface to analyze the trajectory of out-of-plane shear waves.Employing Dorfmann and Ogden’s nonlinear electroelastic framework and the related linear small incremental motion theory,a method has been developed to control the TIR behavior of interface shear waves.It has been found that the TIR behavior is significantly influenced by the strain-stiffening effect induced by biasing fields.Consequently,a biasing field principle involving preset electric displacement and pre-stretch has been proposed for TIR occurrence.By controlling the pre-stretch and preset electric displacement,active regulation of TIR behavior can be achieved.These results suggest a potential method for achieving autonomous energy shielding to improve the reliability of DE devices.展开更多
We investigate theoretically the electron-reflection phenomenon in a graphene n＋n junction based on electron optics, where the local potential in the left n ＋ region is higher than that in the right n region. It is ...We investigate theoretically the electron-reflection phenomenon in a graphene n＋n junction based on electron optics, where the local potential in the left n ＋ region is higher than that in the right n region. It is demonstrated numerically that electrons emitting from a point source in the n ＋ region will experience total internal reflection through the interface of the junction. The reflection becomes stronger and the transmission becomes weaker with decrease of the local potential in the right graphene ribbon. It is also found that when a nonideal interface is considered in the junction, the electron-reflection effect is enhanced due to interracial backseattering.展开更多
A novel optical device of a bulk glass Faraday current sensor is presented,which has a accuracy of 0. 5 in the current region of 1 000- 8 000 A and over a temperature range from-30℃ to + 40℃. The new sensing device ...A novel optical device of a bulk glass Faraday current sensor is presented,which has a accuracy of 0. 5 in the current region of 1 000- 8 000 A and over a temperature range from-30℃ to + 40℃. The new sensing device can compensate the phase difference between p and s components of the incident light caused by total internal reflections in a glass. The self-correction, auto-correlation and auto-amplification techniques are used in the signal treatment with the help of a computer.展开更多
INSULIN secretion was traditionally measured with biochemical and immunological methods such as enzyme linked immunosorbant assay and radioimmunoassay. However, these methods can only tell the amount of insulin secret...INSULIN secretion was traditionally measured with biochemical and immunological methods such as enzyme linked immunosorbant assay and radioimmunoassay. However, these methods can only tell the amount of insulin secreted; they give no information about the secretion process or mechanism of exocytosis. In recent years, an imaging technique known as total internal reflection fluorescence （TIRF） microscopy has been employed to study insulin secretion.展开更多
A spectrometric setup to perform total internal reflection fluorescence (TIRF) and synchronous TIRF measurements at solid/liquid interfaces is presented. The combination of TIRF and synchronous fluorescence was propo...A spectrometric setup to perform total internal reflection fluorescence (TIRF) and synchronous TIRF measurements at solid/liquid interfaces is presented. The combination of TIRF and synchronous fluorescence was proposed to analyze simultaneously different components at interfaces. The TIRF excitation, emission and synchronous spectra of a watersoluble porphyrin were obtained from water/glass interface using this setup without the existence of a surfactant.展开更多
Although abundant research on the anisotropy of van der Waals(vd W)materials has been published,we undertake an in-depth study of their optical properties as they have an important guiding role for light control in tw...Although abundant research on the anisotropy of van der Waals(vd W)materials has been published,we undertake an in-depth study of their optical properties as they have an important guiding role for light control in two-dimensional(2D)nanospace.As an example,we study the reflectance of few-layered black phosphorus(BP)in the total internal reflection(TIR)mode in detail.We demonstrate that its optical anisotropy can be changed on a large scale by varying the incident angles,polarization states,and the in-plane rotation angles of the BP samples.Theoretical analysis indicates that the phenomena observed are common to all the atom-thick biaxial crystals,so these conclusions can be widely applied to other anisotropic 2D materials.This research furthers the current understanding of the properties of BP more comprehensively,and provides guidance for developing new optoelectronic applications,especially when BP and other atom-thick biaxial crystals are integrated with TIR devices.展开更多
The orientation angle is an important parameter that reflects the structure of molecules at interfaces. In order to obtain this parameter, second order nonlinear spectroscopic techniques including second harmonic gene...The orientation angle is an important parameter that reflects the structure of molecules at interfaces. In order to obtain this parameter, second order nonlinear spectroscopic techniques including second harmonic generation （SHG） and sum frequency generation-vibrational spec- troscopy （SFG-VS） have been successfully applied through analysis of the nonlinear signal from various polarizations. In some SHG and SFG-VS experiments, total internal reflection （TIR） configuration has been adopted to get enhanced signals. However, the reports on the detailed procedure of the polarization analysis and the calculation of the orientation angle of interracial molecules under TIR configuration are still very few. In this paper, we mea- sured the orientation angles of two molecules at the hexadecane-water interface under TIR and Non-TIR experimental configurations. The results measured from polarization analysis in TIR configuration consist with those obtained from Non-TIR configuration. This work demonstrates the feasibility and accuracy of polarization analysis in the determination of the orientation angle of molecules at the interfaces under TIR-SHG configuration.展开更多
Total internal reflection fluorescence spectroscopy (TIRF) and synchronous scanning technique were combined to study the adsorption behavior of the meso-tetrakis (4-sulfonatophenyl) porphyrin (TPPS) at the glass-water...Total internal reflection fluorescence spectroscopy (TIRF) and synchronous scanning technique were combined to study the adsorption behavior of the meso-tetrakis (4-sulfonatophenyl) porphyrin (TPPS) at the glass-water interface without any surfactant. The pH dependence of synchronous fluorescence signal at the interface was analyzed. Both unprotonated (TPPS4-) and diprotonated (H2TPPS2-) forms of TPPS were observed at the interface. But the interface favored the adsorption of. The apparent estimated pKa2 value shifted from 5.00 in the bulk solution to 2.7 at the interface. STIRF provides a good technique to study multi-component systems at the interface.展开更多
Adhesion molecule CD146 (100-130kDa) belongs to the immunoglobulin super family and it is originally identified as a biomarker for melanoma. Recently, CD146 is found as
Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force an...Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force and contact area.However,the real contact area fraction should never equal one;there must be a limit smaller than the apparent area,implying that the real contact area cannot increase linearly indefinitely.In this paper,the real contact area between two polymethylmethacrylate(PMMA)blocks under heavy load is measured using the total reflection method,and the contact area is analyzed using the image processing method.The results show that the real contact area increases with normal load linearly in light loads but non-linearly in heavy loads;the number of contact spots increases with load linearly in light loads but also non-linearly in heavy loads,synchronous with the change in the real contact area.The GW,MB,and Zhao,Maietta,and Chang(ZMC)models were used to predict the experiment results,but none of them predicted the non-linear stage.A revised GW model based on the bulk deformation hypothesis performs better in predicting the non-linear stage.The study’s findings can be applied to PMMA or other similar materials,and they can serve as a useful reference for future research on the contact mechanisms of other materials.展开更多
Revealing the factors that affect the vibrational frequency of Stark probe at interface is a pre-requirement for evaluating the absolute interfacial electric field.Here using surface-enhanced infrared absorption(SEIRA...Revealing the factors that affect the vibrational frequency of Stark probe at interface is a pre-requirement for evaluating the absolute interfacial electric field.Here using surface-enhanced infrared absorption(SEIRA)spectroscopy,attenuated total reflection(ATR)spectroscopy and molecular dynamics(MD),we reveal the assembled C≡N at gold nanofilm exhibits a reduced Stark tuning rate(STR)referring to the vibrational frequency shift in response to electric field comparing with the bulk which was regulated by the electron transfer between S and Au.These findings lead to a deeper understanding of the vibrational Stark effect at the interface and provide guidance for improving the interface electric field theory.展开更多
This paper examines the design and optimization of optical fibers for high-speed data transmission, emphasizing advancements that maximize efficiency in modern communication networks. Optical fibers, core components o...This paper examines the design and optimization of optical fibers for high-speed data transmission, emphasizing advancements that maximize efficiency in modern communication networks. Optical fibers, core components of global communication infrastructure, are capable of transmitting data over long distances with minimal loss through principles like total internal reflection. This study explores single-mode and multi-mode fiber designs, providing an overview of key parameters such as core diameter, refractive index profile, and numerical aperture. Mathematical modeling using Maxwell’s equations plays a central role in optimizing fiber performance, helping engineers mitigate challenges like attenuation and dispersion. The paper also discusses advanced techniques, including dense wavelength division multiplexing (DWDM), which enables terabit-per-second data rates. Case studies in practical applications, such as fiber-to-the-home (FTTH) networks and transoceanic cables, highlight the impact of optimized designs on network performance. Looking forward, innovations in photonic crystal fibers and hollow-core fibers are expected to drive further improvements, enabling ultra-high-speed data transmission. The paper concludes by underscoring the significance of continuous research and development to address challenges in optical fiber technology and support the increasing demands of global communication systems.展开更多
Fluorescence microscopy has evolved from a purely biological tool to a powerful chemical instrument for imaging and kinetics research into nanocatalysis.And the demand for high signal-to-noise ratio and temporal–spat...Fluorescence microscopy has evolved from a purely biological tool to a powerful chemical instrument for imaging and kinetics research into nanocatalysis.And the demand for high signal-to-noise ratio and temporal–spatial resolution detection has encouraged rapid growth in total internal reflection fluorescence microscopy(TIRFM).By producing an evanescent wave on the glass–water interface,excitation can be limited to a thin plane to ensure the measured accuracy of kinetics and image contrast of TIRFM.Thus,this unique physical principle of TIRFM makes it suitable for chemical research.This review outlines applications of TIRFM in the field of chemistry,including imaging and kinetics research.Hence,this review could provide guidance for beginners employing TIRFM to solve current challenges creatively in chemistry.展开更多
Formic acid （HCOOH） decomposition at Pt film electrode has been studied by electrochem- ical in situ FTIR spectroscopy under attenuated-total-reflection configuration, in order to clarify whether bridge-bonded forma...Formic acid （HCOOH） decomposition at Pt film electrode has been studied by electrochem- ical in situ FTIR spectroscopy under attenuated-total-reflection configuration, in order to clarify whether bridge-bonded formate （HCOOD） is the reactive intermediate for COad for-mation from HCOOH molecules. When switching from HCOOH-free solution to HCOOH- containing solution at constant potential （E=0.4 V vs. RHE）, we found that immediately upon solution switch COad formation rate is the highest, while surface coverage of formate is zero, then after COad formation rate decreases, while formate coverage reaches a steady state coverage quickly within ca. 1 s. Potential step experiment from E=0.75 V to 0.35 V, reveals that formate band intensity drops immediately right after the potential step, while the COad signal develops slowly with time. Both facts indicate that formate is not the reactive intermediate for formic acid dehydration to CO.展开更多
The spatial and temporal evolution of real contact area of contact interface with loads is a challenge.It is generally believed that there is a positive linear correlation between real contact area and normal load.How...The spatial and temporal evolution of real contact area of contact interface with loads is a challenge.It is generally believed that there is a positive linear correlation between real contact area and normal load.However,with the development of measuring instruments and methods,some scholars have found that the growth rate of real contact area will slow down with the increase of normal load under certain conditions,such as large-scale interface contact with small roughness surface,which is called the nonlinear phenomenon of real contact area.At present,there is no unified conclusion on the explanation of this phenomenon.We set up an experimental apparatus based on the total reflection principle to verify this phenomenon and analyze its mechanism.An image processing method is proposed,which can be used to quantitative analysis micro contact behaviors on macro contact phenomenon.The weighted superposition method is used to identify micro contact spots,to calculate the real contact area,and the color superimposed image is used to identify micro contact behaviors.Based on this method,the spatiotemporal evolution mechanism of real contact area nonlinear phenomena is quantitatively analyzed.Furthermore,the influence of nonlinear phenomenon of real contact area on the whole loading and unloading process is analyzed experimentally.It is found that the effects of fluid between contact interface,normal load amplitude and initial contact state on contact behavior cannot be ignored in large-scale interface contact with small roughness surface.展开更多
Since numerous characteristic absorption lines caused by molecular vibration exist in the midinfrared(MIR)wavelength region,selective excitation or selective dissociation of molecules is possible by tuning the laser w...Since numerous characteristic absorption lines caused by molecular vibration exist in the midinfrared(MIR)wavelength region,selective excitation or selective dissociation of molecules is possible by tuning the laser wavelength to the characteristic absorption lines of target molecules.By applying this feature to the medical fields,less-invasive treatment and non-destructive diagnosis with absorption spectroscopy are possible using tunable MIR lasers.A high-energy nanosecond pulsed MIR tunable laser was obtained with difference-frequency generation(DFG)between a Nd:YAG and a tunable Cr:forsterite lasers.The MIR-DFG laser was tunable in a wavelength range of 5.5–10μm and generated laser pulses with energy of up to 1.4mJ,a pulse width of 5 ns,and a pulse repetition rate of 10 Hz.Selective removal of atherosclerotic lesion was successfully demonstrated with the MIR-DFG laser tuned at a wavelength of 5.75μm,which corresponds to the characteristic absorption of the ester bond in cholesterol esters in the atherosclerotic lesions.We have developed a non-destructive diagnostic probe with an attenuated total reflection(ATR)prism and two hollow optical fibers.An absorption spectrum of cholesterol was measured with the ATR probe by scanning the wavelength of the MIR-DFG laser,and the spectrum was in good agreement with that measured with a commercial Fourier transform infrared spectrometer.展开更多
To improve the sensitivity of protein microarray, a prism surface replaces the surface of the common microscope slide.The protein targets arrayed on the surface are hybridized and labelled by fluorescent probes. Evane...To improve the sensitivity of protein microarray, a prism surface replaces the surface of the common microscope slide.The protein targets arrayed on the surface are hybridized and labelled by fluorescent probes. Evanescent excitation occurs when the convergent laser reaches the surface, and a photomultiplier tube detects the emitted fluorescent signal. A two-dimensional actuator scans the whole surface to achieve planar laser excitation and fluorescence collection. The penetration depth of the evanescent field into the protein targets is only some hundred nanometers and can be controlled by different incident angle of the laser beam, so the undesired background signals are reduced dramatically and the detection sensitivity is improved by a factor of 50 to 100 comparing to confocal excitation. This approach can detect low abundance analytes without signal amplification.展开更多
Deliquescence and efflorescence are the two most important physicochemical processes of aerosol particles. In deliquescence and efflorescence cycles of aerosol particles, many fundamental problems need to be investiga...Deliquescence and efflorescence are the two most important physicochemical processes of aerosol particles. In deliquescence and efflorescence cycles of aerosol particles, many fundamental problems need to be investigated in detail on the molecular level, including ion and molecule interactions in supersaturated aerosols, metastable solid phases that may be formed, and microscopic structures and deliquescence mechanisms of aerosol particles. This paper presents a summary of the progress made in recent investigations of deliquescence and efflorescence processes of aerosol particles by four common spectral techniques, which are known as Raman/electrodynamic balance, Fourier transform infrared/aerosol flow tube, Fourier transform infrared/attenuated total reftection, and confocal Raman on a quartz substrate.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.10775055)
文摘The dispersion relations of normal modes in the layered constructions are studied. In the frequency region with negative permittivity, we investigate the normal modes near the air-metal and the air-matematerial interfaces and compare them. An extra bulk mode appearing in a pass band of two media is found near the air-matematerial interface, which is different from the air-metal case. Moreover, the bulk mode will be further proved by the attenuated total reflection （ATR） technique, in which the coupling between the incident electromagnetic waves and the normal modes is studied. For p-polarized incident waves, the ATR spectra based on the Otto and the Kretschmann configurations are obtained numerically, where the dips present the excitations of the surface and bulk modes. Furthermore, we also discuss the influences of the middle layer thickness, the incident angle and the damping term on the reflection in detail. It is found that the coupling frequencies and the maximum strength are strongly dependent on the above media parameters.
文摘Simulation approach includes such processes as photon emissions from X-ray tube with a spectral distribution, total reflection on the sample support, photoelectric effect in thin layer sample, as well as characteristic line absorption and detection. The calculation results are in agreement with experimental ones.
基金supported by the National Natural Science Foundation of China(Grant No.12372154)National Science and Technology Major Project(Grant No.J2019-III-0010-0054).
文摘The total internal reflection(TIR)behavior of interface shear waves is crucial for ensuring the reliability of dielectric elastomer(DE)devices.However,due to the complex force-electric coupling and large deformation of DEs,the TIR behavior of shear waves in heterogeneous force-electric interface models is still unclear.This study modeled an elastic/DE bi-material interface to analyze the trajectory of out-of-plane shear waves.Employing Dorfmann and Ogden’s nonlinear electroelastic framework and the related linear small incremental motion theory,a method has been developed to control the TIR behavior of interface shear waves.It has been found that the TIR behavior is significantly influenced by the strain-stiffening effect induced by biasing fields.Consequently,a biasing field principle involving preset electric displacement and pre-stretch has been proposed for TIR occurrence.By controlling the pre-stretch and preset electric displacement,active regulation of TIR behavior can be achieved.These results suggest a potential method for achieving autonomous energy shielding to improve the reliability of DE devices.
基金Supported by the Science Research&Train Program of(SRTP)Southeast University for Undergraduates
文摘We investigate theoretically the electron-reflection phenomenon in a graphene n＋n junction based on electron optics, where the local potential in the left n ＋ region is higher than that in the right n region. It is demonstrated numerically that electrons emitting from a point source in the n ＋ region will experience total internal reflection through the interface of the junction. The reflection becomes stronger and the transmission becomes weaker with decrease of the local potential in the right graphene ribbon. It is also found that when a nonideal interface is considered in the junction, the electron-reflection effect is enhanced due to interracial backseattering.
文摘A novel optical device of a bulk glass Faraday current sensor is presented,which has a accuracy of 0. 5 in the current region of 1 000- 8 000 A and over a temperature range from-30℃ to + 40℃. The new sensing device can compensate the phase difference between p and s components of the incident light caused by total internal reflections in a glass. The self-correction, auto-correlation and auto-amplification techniques are used in the signal treatment with the help of a computer.
文摘INSULIN secretion was traditionally measured with biochemical and immunological methods such as enzyme linked immunosorbant assay and radioimmunoassay. However, these methods can only tell the amount of insulin secreted; they give no information about the secretion process or mechanism of exocytosis. In recent years, an imaging technique known as total internal reflection fluorescence （TIRF） microscopy has been employed to study insulin secretion.
文摘A spectrometric setup to perform total internal reflection fluorescence (TIRF) and synchronous TIRF measurements at solid/liquid interfaces is presented. The combination of TIRF and synchronous fluorescence was proposed to analyze simultaneously different components at interfaces. The TIRF excitation, emission and synchronous spectra of a watersoluble porphyrin were obtained from water/glass interface using this setup without the existence of a surfactant.
基金supported by the K. C. Wong Education Foundation (GJTD-2018-08)the Natural Science Foundation of China (NSFC) (Grants 11804334, 51705192)+1 种基金the China Postdoctoral Science Foundation (2017M611325)the National Postdoctoral Program for Innovative Talents (BX201600064)
文摘Although abundant research on the anisotropy of van der Waals(vd W)materials has been published,we undertake an in-depth study of their optical properties as they have an important guiding role for light control in two-dimensional(2D)nanospace.As an example,we study the reflectance of few-layered black phosphorus(BP)in the total internal reflection(TIR)mode in detail.We demonstrate that its optical anisotropy can be changed on a large scale by varying the incident angles,polarization states,and the in-plane rotation angles of the BP samples.Theoretical analysis indicates that the phenomena observed are common to all the atom-thick biaxial crystals,so these conclusions can be widely applied to other anisotropic 2D materials.This research furthers the current understanding of the properties of BP more comprehensively,and provides guidance for developing new optoelectronic applications,especially when BP and other atom-thick biaxial crystals are integrated with TIR devices.
文摘The orientation angle is an important parameter that reflects the structure of molecules at interfaces. In order to obtain this parameter, second order nonlinear spectroscopic techniques including second harmonic generation （SHG） and sum frequency generation-vibrational spec- troscopy （SFG-VS） have been successfully applied through analysis of the nonlinear signal from various polarizations. In some SHG and SFG-VS experiments, total internal reflection （TIR） configuration has been adopted to get enhanced signals. However, the reports on the detailed procedure of the polarization analysis and the calculation of the orientation angle of interracial molecules under TIR configuration are still very few. In this paper, we mea- sured the orientation angles of two molecules at the hexadecane-water interface under TIR and Non-TIR experimental configurations. The results measured from polarization analysis in TIR configuration consist with those obtained from Non-TIR configuration. This work demonstrates the feasibility and accuracy of polarization analysis in the determination of the orientation angle of molecules at the interfaces under TIR-SHG configuration.
文摘Total internal reflection fluorescence spectroscopy (TIRF) and synchronous scanning technique were combined to study the adsorption behavior of the meso-tetrakis (4-sulfonatophenyl) porphyrin (TPPS) at the glass-water interface without any surfactant. The pH dependence of synchronous fluorescence signal at the interface was analyzed. Both unprotonated (TPPS4-) and diprotonated (H2TPPS2-) forms of TPPS were observed at the interface. But the interface favored the adsorption of. The apparent estimated pKa2 value shifted from 5.00 in the bulk solution to 2.7 at the interface. STIRF provides a good technique to study multi-component systems at the interface.
文摘Adhesion molecule CD146 (100-130kDa) belongs to the immunoglobulin super family and it is originally identified as a biomarker for melanoma. Recently, CD146 is found as
基金Supported by National Natural Science Foundation of China(Grant No.11872033)Beijing Municipal Natural Science Foundation(Grant No.3172017)。
文摘Many experiments have supported the contact models,such as the GW and MB models,but the majority of previous validations have been performed under light loads,resulting in a linear relationship between normal force and contact area.However,the real contact area fraction should never equal one;there must be a limit smaller than the apparent area,implying that the real contact area cannot increase linearly indefinitely.In this paper,the real contact area between two polymethylmethacrylate(PMMA)blocks under heavy load is measured using the total reflection method,and the contact area is analyzed using the image processing method.The results show that the real contact area increases with normal load linearly in light loads but non-linearly in heavy loads;the number of contact spots increases with load linearly in light loads but also non-linearly in heavy loads,synchronous with the change in the real contact area.The GW,MB,and Zhao,Maietta,and Chang(ZMC)models were used to predict the experiment results,but none of them predicted the non-linear stage.A revised GW model based on the bulk deformation hypothesis performs better in predicting the non-linear stage.The study’s findings can be applied to PMMA or other similar materials,and they can serve as a useful reference for future research on the contact mechanisms of other materials.
基金The National Key R&D Program of China(No.2022YFE0113000)the National Science Fund for Distinguished Young Scholars(No.22025406)+1 种基金the National Natural Science Foundation of China(Nos.22074138,12174457)the Youth Innovation Promotion Association of CAS(No.2020233)for financial support。
文摘Revealing the factors that affect the vibrational frequency of Stark probe at interface is a pre-requirement for evaluating the absolute interfacial electric field.Here using surface-enhanced infrared absorption(SEIRA)spectroscopy,attenuated total reflection(ATR)spectroscopy and molecular dynamics(MD),we reveal the assembled C≡N at gold nanofilm exhibits a reduced Stark tuning rate(STR)referring to the vibrational frequency shift in response to electric field comparing with the bulk which was regulated by the electron transfer between S and Au.These findings lead to a deeper understanding of the vibrational Stark effect at the interface and provide guidance for improving the interface electric field theory.
文摘This paper examines the design and optimization of optical fibers for high-speed data transmission, emphasizing advancements that maximize efficiency in modern communication networks. Optical fibers, core components of global communication infrastructure, are capable of transmitting data over long distances with minimal loss through principles like total internal reflection. This study explores single-mode and multi-mode fiber designs, providing an overview of key parameters such as core diameter, refractive index profile, and numerical aperture. Mathematical modeling using Maxwell’s equations plays a central role in optimizing fiber performance, helping engineers mitigate challenges like attenuation and dispersion. The paper also discusses advanced techniques, including dense wavelength division multiplexing (DWDM), which enables terabit-per-second data rates. Case studies in practical applications, such as fiber-to-the-home (FTTH) networks and transoceanic cables, highlight the impact of optimized designs on network performance. Looking forward, innovations in photonic crystal fibers and hollow-core fibers are expected to drive further improvements, enabling ultra-high-speed data transmission. The paper concludes by underscoring the significance of continuous research and development to address challenges in optical fiber technology and support the increasing demands of global communication systems.
基金This work was supported by the National Science Foundation of China(21925205,22072145,22102172,21721003)。
文摘Fluorescence microscopy has evolved from a purely biological tool to a powerful chemical instrument for imaging and kinetics research into nanocatalysis.And the demand for high signal-to-noise ratio and temporal–spatial resolution detection has encouraged rapid growth in total internal reflection fluorescence microscopy(TIRFM).By producing an evanescent wave on the glass–water interface,excitation can be limited to a thin plane to ensure the measured accuracy of kinetics and image contrast of TIRFM.Thus,this unique physical principle of TIRFM makes it suitable for chemical research.This review outlines applications of TIRFM in the field of chemistry,including imaging and kinetics research.Hence,this review could provide guidance for beginners employing TIRFM to solve current challenges creatively in chemistry.
文摘Formic acid （HCOOH） decomposition at Pt film electrode has been studied by electrochem- ical in situ FTIR spectroscopy under attenuated-total-reflection configuration, in order to clarify whether bridge-bonded formate （HCOOD） is the reactive intermediate for COad for-mation from HCOOH molecules. When switching from HCOOH-free solution to HCOOH- containing solution at constant potential （E=0.4 V vs. RHE）, we found that immediately upon solution switch COad formation rate is the highest, while surface coverage of formate is zero, then after COad formation rate decreases, while formate coverage reaches a steady state coverage quickly within ca. 1 s. Potential step experiment from E=0.75 V to 0.35 V, reveals that formate band intensity drops immediately right after the potential step, while the COad signal develops slowly with time. Both facts indicate that formate is not the reactive intermediate for formic acid dehydration to CO.
基金the National Natural Science Foundation of China(Grant No.11872033)the Beijing Natural Science Foundation,China(Grant No.3172017).
文摘The spatial and temporal evolution of real contact area of contact interface with loads is a challenge.It is generally believed that there is a positive linear correlation between real contact area and normal load.However,with the development of measuring instruments and methods,some scholars have found that the growth rate of real contact area will slow down with the increase of normal load under certain conditions,such as large-scale interface contact with small roughness surface,which is called the nonlinear phenomenon of real contact area.At present,there is no unified conclusion on the explanation of this phenomenon.We set up an experimental apparatus based on the total reflection principle to verify this phenomenon and analyze its mechanism.An image processing method is proposed,which can be used to quantitative analysis micro contact behaviors on macro contact phenomenon.The weighted superposition method is used to identify micro contact spots,to calculate the real contact area,and the color superimposed image is used to identify micro contact behaviors.Based on this method,the spatiotemporal evolution mechanism of real contact area nonlinear phenomena is quantitatively analyzed.Furthermore,the influence of nonlinear phenomenon of real contact area on the whole loading and unloading process is analyzed experimentally.It is found that the effects of fluid between contact interface,normal load amplitude and initial contact state on contact behavior cannot be ignored in large-scale interface contact with small roughness surface.
基金supported by Takeda Science Foundation,Japanese Foundation for Research and Promotion of Endoscopy,and Grants-in-Aid for Scientific Research(KAKENHI).
文摘Since numerous characteristic absorption lines caused by molecular vibration exist in the midinfrared(MIR)wavelength region,selective excitation or selective dissociation of molecules is possible by tuning the laser wavelength to the characteristic absorption lines of target molecules.By applying this feature to the medical fields,less-invasive treatment and non-destructive diagnosis with absorption spectroscopy are possible using tunable MIR lasers.A high-energy nanosecond pulsed MIR tunable laser was obtained with difference-frequency generation(DFG)between a Nd:YAG and a tunable Cr:forsterite lasers.The MIR-DFG laser was tunable in a wavelength range of 5.5–10μm and generated laser pulses with energy of up to 1.4mJ,a pulse width of 5 ns,and a pulse repetition rate of 10 Hz.Selective removal of atherosclerotic lesion was successfully demonstrated with the MIR-DFG laser tuned at a wavelength of 5.75μm,which corresponds to the characteristic absorption of the ester bond in cholesterol esters in the atherosclerotic lesions.We have developed a non-destructive diagnostic probe with an attenuated total reflection(ATR)prism and two hollow optical fibers.An absorption spectrum of cholesterol was measured with the ATR probe by scanning the wavelength of the MIR-DFG laser,and the spectrum was in good agreement with that measured with a commercial Fourier transform infrared spectrometer.
文摘To improve the sensitivity of protein microarray, a prism surface replaces the surface of the common microscope slide.The protein targets arrayed on the surface are hybridized and labelled by fluorescent probes. Evanescent excitation occurs when the convergent laser reaches the surface, and a photomultiplier tube detects the emitted fluorescent signal. A two-dimensional actuator scans the whole surface to achieve planar laser excitation and fluorescence collection. The penetration depth of the evanescent field into the protein targets is only some hundred nanometers and can be controlled by different incident angle of the laser beam, so the undesired background signals are reduced dramatically and the detection sensitivity is improved by a factor of 50 to 100 comparing to confocal excitation. This approach can detect low abundance analytes without signal amplification.
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.20073004, No.20473012, No.20673010, and No.20640420450）, the 111 Project B07012, and the China Postdoctoral Science Foundation （No.20070410466）. The Trans-Century Training Program Foundation for the Talents by the Ministry of Education of China was also gratefully acknowledged.
文摘Deliquescence and efflorescence are the two most important physicochemical processes of aerosol particles. In deliquescence and efflorescence cycles of aerosol particles, many fundamental problems need to be investigated in detail on the molecular level, including ion and molecule interactions in supersaturated aerosols, metastable solid phases that may be formed, and microscopic structures and deliquescence mechanisms of aerosol particles. This paper presents a summary of the progress made in recent investigations of deliquescence and efflorescence processes of aerosol particles by four common spectral techniques, which are known as Raman/electrodynamic balance, Fourier transform infrared/aerosol flow tube, Fourier transform infrared/attenuated total reftection, and confocal Raman on a quartz substrate.
