This article, in order to precisely impose friction on aircraft and weapon actuation systems, presents a new friction loading method characteristic of ＂torque-zero velocity＂ switching control with an electro-hydraul...This article, in order to precisely impose friction on aircraft and weapon actuation systems, presents a new friction loading method characteristic of ＂torque-zero velocity＂ switching control with an electro-hydraulic load simulator. As the general Stribeck friction model has little related to static friction, it proposes a ＂torque-zero velocity＂ switcher, in which a zero-velocity controller is developed to load the static friction and a torque controller the kinetic friction. With the help of mathematical modeling, this article designs a ＂torque-zero velocity＂ switching controller and, correspondingly, provides a ＂dual-threshold judgment＂ algorithm. Simulation results indicate that the proposed method can be successfully used to carry out the static and kinetic friction simulation with an electro-hydraulic load simulator.展开更多
Ships use propulsion machinery systems to create directional thrust. Sailing in ice-covered waters involves the breaking of ice pieces and their submergence as the ship hull advances. Sometimes, submerged ice pieces i...Ships use propulsion machinery systems to create directional thrust. Sailing in ice-covered waters involves the breaking of ice pieces and their submergence as the ship hull advances. Sometimes, submerged ice pieces interact with the propeller and cause irregular fluctuations of the torque load. As a result, the propeller and engine dynamics become imbalanced, and energy propagates through the propulsion machinery system until equilibrium is reached. In such imbalanced situations, the measured propeller shaft torque response is not equal to the propeller torque. Therefore, in this work, the overall system response is simulated under the ice-related torque load using the Bond graph model. The energy difference between the propeller and propeller shaft is estimated and related to their corresponding mechanical energy. Additionally, the mechanical energy is distributed among modes. Based on the distribution, kinetic and potential energy are important for the correlation between propeller torque and propeller shaft response.展开更多
An adaptive load torque observer is presented to compensate the torque ripple in PMSM servo system. A simple adaptive scheme is derived using Popov ＇ s hyperstability theory. The torque ripple detected by the observe...An adaptive load torque observer is presented to compensate the torque ripple in PMSM servo system. A simple adaptive scheme is derived using Popov ＇ s hyperstability theory. The torque ripple detected by the observer is compensated by a feed forwarding equivalent current which gives fast response. The noisy current information is exempt from the observer to avoid its deterioration to the quality of the observer. The speed measurement delay is considered by using observed speed sinee the instantaneous velocity can＇t be estimated precisely at low speed because of too few position pulses from the absolute encoder during one time interval. Simulation and experimental results demonstrate that the proposed method can improve the dynamic performance of PMSM servo system satisfyingly.展开更多
A point to? point positioning control of systems with highly nonlinear frictions is studied. In view of variable frictions caused by the changes of load torque, an experimental comparison was made between the valve?...A point to? point positioning control of systems with highly nonlinear frictions is studied. In view of variable frictions caused by the changes of load torque, an experimental comparison was made between the valve? controlled hydraulic motor servo system with PID control and that with friction compensation control. Experimental results show that the gross steady errors are caused by frictions when the system is controlled by the conventional proportional control algorithm. Although the errors can be reduced by introducing the integral control, the limit cycle oscillation and the long setting time are caused. The positioning error for a constant load torque can be eliminated by using fixed friction compensation, but poor positioning accuracy is caused by the same fixed friction compensation when the load torques varies greatly. The dynamic friction compensation based on the error and change in error measurements can significantly improve the position precision in a broad range of the changes of load torque.展开更多
This paper investigates motion coupling disturbance（the so called surplus torque）in the hardware-in-the-loop（HIL）experiments.The＇＇velocity synchronization scheme＇＇was proposed by Jiao for an electro-hydraulic ...This paper investigates motion coupling disturbance（the so called surplus torque）in the hardware-in-the-loop（HIL）experiments.The＇＇velocity synchronization scheme＇＇was proposed by Jiao for an electro-hydraulic load simulator（EHLS）in 2004.In some situations,however,the scheme is limited in the implementation for certain reasons,as is the case when the actuator＇s valve signal is not available or it is seriously polluted by noise.To solve these problems,a＇＇dual-loop scheme＇＇is developed for EHLS.The dual-loop scheme is a combination of a torque loop and a position synchronization loop.The role of the position synchronization loop is to decouple the motion disturbance caused by the actuator system.To verify the feasibility and effectiveness of the proposed scheme,extensive simulations are performed using AMESim.Then,the performance of the developed method is validated by experiments.展开更多
基金National Natural Science Foundation of China （50825502）
文摘This article, in order to precisely impose friction on aircraft and weapon actuation systems, presents a new friction loading method characteristic of ＂torque-zero velocity＂ switching control with an electro-hydraulic load simulator. As the general Stribeck friction model has little related to static friction, it proposes a ＂torque-zero velocity＂ switcher, in which a zero-velocity controller is developed to load the static friction and a torque controller the kinetic friction. With the help of mathematical modeling, this article designs a ＂torque-zero velocity＂ switching controller and, correspondingly, provides a ＂dual-threshold judgment＂ algorithm. Simulation results indicate that the proposed method can be successfully used to carry out the static and kinetic friction simulation with an electro-hydraulic load simulator.
基金Funded Through the Norwegian Research Council Project No.194529
文摘Ships use propulsion machinery systems to create directional thrust. Sailing in ice-covered waters involves the breaking of ice pieces and their submergence as the ship hull advances. Sometimes, submerged ice pieces interact with the propeller and cause irregular fluctuations of the torque load. As a result, the propeller and engine dynamics become imbalanced, and energy propagates through the propulsion machinery system until equilibrium is reached. In such imbalanced situations, the measured propeller shaft torque response is not equal to the propeller torque. Therefore, in this work, the overall system response is simulated under the ice-related torque load using the Bond graph model. The energy difference between the propeller and propeller shaft is estimated and related to their corresponding mechanical energy. Additionally, the mechanical energy is distributed among modes. Based on the distribution, kinetic and potential energy are important for the correlation between propeller torque and propeller shaft response.
文摘An adaptive load torque observer is presented to compensate the torque ripple in PMSM servo system. A simple adaptive scheme is derived using Popov ＇ s hyperstability theory. The torque ripple detected by the observer is compensated by a feed forwarding equivalent current which gives fast response. The noisy current information is exempt from the observer to avoid its deterioration to the quality of the observer. The speed measurement delay is considered by using observed speed sinee the instantaneous velocity can＇t be estimated precisely at low speed because of too few position pulses from the absolute encoder during one time interval. Simulation and experimental results demonstrate that the proposed method can improve the dynamic performance of PMSM servo system satisfyingly.
文摘A point to? point positioning control of systems with highly nonlinear frictions is studied. In view of variable frictions caused by the changes of load torque, an experimental comparison was made between the valve? controlled hydraulic motor servo system with PID control and that with friction compensation control. Experimental results show that the gross steady errors are caused by frictions when the system is controlled by the conventional proportional control algorithm. Although the errors can be reduced by introducing the integral control, the limit cycle oscillation and the long setting time are caused. The positioning error for a constant load torque can be eliminated by using fixed friction compensation, but poor positioning accuracy is caused by the same fixed friction compensation when the load torques varies greatly. The dynamic friction compensation based on the error and change in error measurements can significantly improve the position precision in a broad range of the changes of load torque.
基金sponsored by the National Basic Research Program of China (No.2014CB046406)the Key Projects of the National Natural Science Foundation (No.51235002)
文摘This paper investigates motion coupling disturbance（the so called surplus torque）in the hardware-in-the-loop（HIL）experiments.The＇＇velocity synchronization scheme＇＇was proposed by Jiao for an electro-hydraulic load simulator（EHLS）in 2004.In some situations,however,the scheme is limited in the implementation for certain reasons,as is the case when the actuator＇s valve signal is not available or it is seriously polluted by noise.To solve these problems,a＇＇dual-loop scheme＇＇is developed for EHLS.The dual-loop scheme is a combination of a torque loop and a position synchronization loop.The role of the position synchronization loop is to decouple the motion disturbance caused by the actuator system.To verify the feasibility and effectiveness of the proposed scheme,extensive simulations are performed using AMESim.Then,the performance of the developed method is validated by experiments.
